E8951

E8951
Installation Guide
Network Integration
TM
E8951
·
US
®
A C n et
·
O R I E S
T
,
The E8951 is a protocol conversion gateway that adapts supported Veris Modbus RTU energy meters to building
automation systems using BACnet protocol over either IP or MS/TP physical layer interfaces. The E8951 supports
up to 32 meters or 10,000 total measurement points (number of output points varies by meter model). It is
pre-programmed to discover any supported meters and automatically configure them for BACnet MS/TP or
BACnet/IP. Each Modbus meter is presented as a BACnet device, with a unique BACnet device_ID and a full set of
measurement data and configuration objects. Little configuration is required. The user sets up communication and
protocol parameters using DIP switches and/or a built-in web server Graphical User Interface (GUI).
A
c.
In
A merica
G
r
th
B
E S T I N
o
of N
C
Rheinlan
T
UV
d
T
Modbus-to-BACnet Protocol Converter
Product Overview
L A
R
B O
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• The installer is responsible for conformance to all applicable codes.
Control system design must consider the potential failure modes of control paths and, for
certain critical control functions, provide a means to acheive a safe state during and after a
path failure. Examples of critical control functions are emergency stop and over-travel stop.
WARNING
LOSS OF CONTROL
∙ Assure that the system will reach a safe state during and after a control path failure.
∙ Separate or redundant control paths must be provided for critical control functions.
∙ Test the effect of transmission delays or failures of communication links.1
∙ Each implementation of equipment using communication links must be individually
and thoroughly tested for proper operation before placing it in service.
Failure to follow these instructions may cause injury, death or equipment damage.
1For additional information about anticipated transmission delays or failures of the link, refer to
NEMA ICS 1.1 (latest edition). Safety Guidelins for the Application, Installation, and Maintenance
of Solid-State Control or its equivalent in your specific country, language, and/or location.
Veris Industries assumes no responsibility for any consequences arising out of the use
of this material.
FCC PART 15 INFORMATION
NOTE: This equipment has been tested by the manufacturer and found
to comply with the limits for a class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Modifications to this product without the express authorization of
Veris Industries nullify this statement.
The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of
Conformity for additional details.
Product Identification
E8951 Modbus-to-BACnet Protocol Converter
Supported Veris Meters: Enercept H8035/6 Series,
E50C2, E50C3*, E51C2, E51C3*, H81xx Series (with the
H8163-CB Modbus RTU Communication Board),
H8238 Series, H8436/7 Series, H704/H663 Series,
E30xA/B/C Series, and U013-0010/0011 I/O modules.
* The E8951 does not support the logging functionality of these meters.
Refer to Appendix 3 to determine how many meters of each type can be supported.
Specifications
DOWNSTREAM (DEVICE) INTERFACES
Physical Layer
2-wire RS-485
Line Termination
Internal, 120 Ω
Line Polarization
Internal
Protocol
Baud Rate
Number of Devices Supported
Modbus RTU
9600 to 38400 (selections vary with Modbus devices used)
Up to 32 devices (not to exceed 10,000 total BACnet data objects)
UPSTREAM (CONTROLLER) ETHERNET INTERFACE
Physical Layer
Protocol
10/100 Mb Ethernet
BACnet IP
UPSTREAM (CONTROLLER) SERIAL INTERFACE
Physical Layer
2-wire RS-485
Protocol
BACnet MS/TP
Baud Rate
9600, 19200, 38400, and 76800
INPUT POWER REQUIREMENTS
Supply Voltage
Nominal Current Draw @ 12V
Class 2 9 to 30 Vdc or 12 to 24 Vac
240 mA
ENVIRONMENTAL
Operating Temperature Range
Operating Humidity Range
Agency Approvals
ZL0135-0A
Page 1 of 162
-40 to 60 °C (-40 to 140 °F)
5 to 90% RH non-condensing
CE; TUV approved to UL916
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Table of Contents
ZL0135-0A
Page 2 of 162
TM
Dimensions
3
Product Diagram
3
LED Blink Codes
3
Installation
4
Configuration
4
BACnet Programming Information
20
Troubleshooting
23
China RoHS Compliance Information (EFUP Table)
23
Appendix 1: Data Objects for Supported Metering Devices
Enercept H8035 Series Energy Meters (all models)
E50C2 and E50C3 Uni-Directional Energy Meters
E51C2 and E51C3 Bi-Directional Energy Meters
H8436 Series Energy Meters (H8436V, H8436VB & H8436VBS)
H8437 Series Energy Meters (H8437V, H8437VB & H8437VBS)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL)
H8163 Series Energy Meter with H8163-CB Modbus Communication Board
E3xAxxxx and E3xExxx Branch Circuit Power Meters
E3xBxxx Branch Circuit Meters
E3xCxxx Branch Circuit Meters
H704/H663 Branch Current Monitors
24
24
26
30
35
36
39
45
48
112
132
151
Appendix 2: DIP Switch Address Settings
160
Appendix 3: Quick Guide to Calculate the Number of Meters Supported
162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Dimensions
2.9”
(74 mm)
5.1”
(129 mm)
4.5”
(115 mm)
3.25”
(83 mm)
3.6”
(92 mm)
1.6”
(41 mm)
Product Diagram
Upstream RS-485
DIP switches for setting MS/TP
MAC address, primary protocol
mode, MS/TP baud rate,
Modbus baud rate, and
enabling auto-discovery of
meters
BACnet
IP/Ethernet
Port
Downstream Modbus RTU port RS-485 +, -, Shield
LED Blink Codes
ZL0135-0A
Page 3 of 162
LED
Power 9 to 30 Vdc, 12 to 24 Vac
Color
Description
SPL
Blue
Solid blue indicates that a meter that was discovered at power-up is no longer communicating.
RUN
Dark Green
Slow blink (one second on, one second off) after the product has initialized (approximately 40 seconds after the unit
is powered or reset). This indicates normal operation.
ERR
Red
This illuminates blink briefly when the Run LED first comes on (about 15 seconds after the unit is powered or reset).
A steady red light indicates the unit needs attention.
RX
Yellow
Indicates the device is receiving data on the downstream Modbus link.
TX
Orange
Indicates the device is transmitting data on the downstream Modbus link.
PWR
Light Green
This is always on when the unit is powered.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Installation
TM
The E8951 can be DIN rail mounted, using the supplied DIN rail mounting clip, or screw-mounted directly to a wall or other flat
surface using the mounting holes on either side of the housing.
6-Pin Connector
Pin #
Pin Assignment
Pin 1
RS-485 + (Modbus)
Pin 2
RS-485 - (Modbus)
Pin 3
RS-485 Shield
Pin 4
V+
Pin 5
V-
Pin 6
FRAME GND
Modbus
Power
1. Refer to the Installation Guides for the specific meter devices used to locate instructions on connecting the meters and
changing their configuration settings.
2. Connect the Modbus outputs of the devices to the Modbus side of the E8951.
120 Ω resistor on the last device in the daisy chain.
+
–
S
E8951
Meters
• Wire the RS-485 bus as a daisy chain from device to device (up to 32 supported devices) without any stubs. Use a 120 Ω
termination resistor (not included) on the device farthest from the E8951. An additional 120Ω termination and Modbus
line polarization are provided internal to the E8951.
• Connect shield to earth ground somewhere on the RS-485 bus (only in one location, to avoid ground loops). The shield
is not internally connected to earth ground.
• Use wire with an insulation rating sufficient for the location where the meter is installed (e.g. Belden 1120A for
installation in panels with up to 600 VAC).
3. Connect 9 to 30 Vdc or 12 to 24 Vac to the +PWR/-PWR terminals of the 6-pin connector.
4. Connect the Upstream RS-485 connections on the E8951 to the field controller or other RS-485 interface according to its
guidelines.
Pin
Label
Pin #
Pin assignment
+
Pin 1
RS-485 + (MS/TP)
-
Pin 2
RS-485 - (MS/TP)
G
Pin 3
RS-485 Shield
G (Shield) –
+
Once the wiring connections are complete, configure the E8951 protocol settings using either the DIP switches or the GUI,
then configure the Modbus settings on the Modbus meters. Power on the meters first, so that they initialize and are ready to
communicate, then power up the E8951 to start the discovery process.
Configuration
ZL0135-0A
Page 4 of 162
Configuration Using DIP Switches (BACnet MS/TP Only)
The product can easily be configured to connect via BACnet MS/TP without connecting a PC via Ethernet to run the GUI as long as
you don’t need to change the settings for the E3x_RTC_Control (default is BACnet Time Sync) and Disc_Length (default is 32,
meaning it will scan Modbus addresses 1 through 32 for supported devices). When using a protocol mode other than MS/TP or
when you need to set these other parameters, you will need to set up an Ethernet connection to a web browser and use the GUI.
See the “Configuration Using the GUI” section of this document for further information.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
The unit is shipped with a default setting that allows MS/TP configuration using the DIP switches on the top of the unit. This
setting is the first parameter (Config_Method) in the GUI, and must be left in the “DIP Switches” mode (0) or the DIP switch
settings will be ignored and overridden by corresponding parameter stings in the GUI.
Use DIP switches S0 to S2 to set the Modbus baud rate to 9600, 19200, or 38400. The default baud rate is 9600, because this rate is
available on all the devices supported by the E8951. If all connected devices support a faster rate, use the highest rate in common
to improve performance. Set the E8951 and all Modbus devices in the series to the same rate. Set all devices to NO parity.
Baud Rate
S0 – S2 DIP Switches
S0
S1
S2
9600 Baud



19200 Baud



38400 Baud



Protocol Mode Selection
Use DIP switches A6 and A7 to select the primary protocol mode (BACnet MS/TP, BACnet IP or SNMP). See “Appendix 2: DIP Switch
Address Settings” on page 160 for the A0 to A6 switch settings in BACnet MS/TP mode. Using the GUI to configure modes other
than MS/TP is recommended to provide access to full functionality.
A6
A7
BACnet MS/TP
Protocol Mode
x

BACnet IP


SNMP


Upstream RS-485 Setup for either BACnet MS/TP or Modbus RTU
1. If using BACnet MS/TP mode and you are using the DIP configuration mode (selectable in the GUI), set the MAC address using
DIP switches A0-A6. See “Appendix 2: DIP Switch Address Settings” on page 160 for a full table of valid address switch
settings.
If you are using any mode other than BACnet MS/TP, want to use the upstream RS-485 interface for Modbus RTU and you are
using the DIP configuration mode (selectable in the GUI), you can use switches A0-A5 to set the upstream Modbus address
from 0-63. If you need to set a Modbus RTU address larger than 63 or a Modbus parity selection other than “None”, you will
need to change the Configuration Method to “GUI” and use the GUI to select them.
2. If using BACnet MS/TP mode and you are using the DIP configuration mode (selectable in the GUI), set the MS/TP baud rate
using DIP switches B0-B3.
Baud
ZL0135-0A
Page 5 of 162
B0
B1
B2
B3
9600




19200




38400




76800




MAC
Address
Baud
Rate
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
Discovery Mode Setting
1. Leave DIP switch S3 in the “Discovery Mode” position for normal operation.
Mode
S3
Discovery

Locked

Set BACnet MS/TP Protocol Parameters
1. Device_ID – The default Device_ID for the virtual router in the E8951 is set by the Device_Offset parameter, which has a
factory default value of 50000. Supported meters discovered by the E8951 will have Device_ID values that are the sum of
this Device_Offset parameter and the Modbus address of the discovered meter. Once you are connected to a BACnet system,
you can set individual Device_ID of any of them to any valid value by writing a new value to the Device_ID property of the
Device object. Alternately, you can read and/or change the Device_Offset parameter by accessing object AV2 (of the virtual
router) via BACnet.
2. BACnet network number – The E8951 gateway creates a BACnet virtual router and separate BACnet devices for each device
discovered at a Modbus address polled behind this virtual router, allowing the devices to be discoverable and independently
accessed via BACnet, even if the virtual router is connected by MS/TP, using a single MAC address. To use this product with MS/
TP, the BACnet system must support the discovery and use of a BACnet router on the MS/TP trunk and any devices beyond it.
This virtual router creates an exclusive BACnet network on which the meter’s BACnet devices reside. This network must have
a BACnet network number that is different from any other networks in the entire BACnet enterprise. When multiple E8951
products are added anywhere in the enterprise, each one must have a unique network number. Failure to set an exclusive value
in this field causes communication conflicts in the BACnet system. You can read and/or change this internal network number
via BACnet as object AV1 (of the virtual router). The factory default value of this network number is 50.
Enter a non-conflicting value and click Submit. Valid network numbers range from 1 to 5534; if values outside this range are
entered, the network number will be set to 5. The new value is first used at the next power-up or system restart. If using an
external BACnet router to connect the E8951 as an MS/TP device, it is recommended that the router also be restarted after the
E8951 has completed discovery when the network number is changed (to allow the external router to re-discover the E8951
with its new internal network number).
3. Max_Master – The factory default for Max_Master is 127. It is a writable property of the Device object of the virtual router in
the E8951.
ZL0135-0A
Page 6 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
Accessing the Graphical User Interface
If the E8951 IP address parameters are already configured to work on the network and they are being accessed from a PC on that
same network, open a web browser and enter the IP address of the E8951 into the address/URL field on the browser. Click Enter.
The GUI launches and appears, as shown, in the browser window.
If the E8951 IP address parameters are not configured for the network you can either use a PC-based tool called the Veris Toolbox,
which can be downloaded from the Veris website at www.veris.com (see”Using the Veris Toolbox to Set Up the IP Address for Use
on Your Network” on page 7) or, connect a PC directly and access the GUI as described in the section “Using the GUI to Set Up
the IP Address for Use on Your Network” on page 9.
Using the Veris Toolbox to Set Up the IP Address for Use on Your Network
1. Download the Veris Toolbox software onto a PC from www.Veris.com/BACnet.
2. Extract the software from the zip file.
3. Run the Setup.exe file and follow the installation instructions.
4. Either connect the E8951 Ethernet interface to the same network subnet as your PC or connect a cable between them directly.
You will not need to change any network settings on the PC for the Toolbox software to find the E8951.
5. Apply power to the E8951.
ZL0135-0A
Page 7 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
6. Launch the Veris Toolbox software. It will discover the E8951, regardless of its IP settings.
7. Click the gear-shaped configuration icon near the right edge of the window on the line that shows the device you wish to
configure. The Configure Device dialog will appear.
8. Click the Network Settings button. The Device Network Settings dialog will appear. This dialog shows all the current IP settings
of the E8951.
9. Enter the network settings needed to operate properly on your network.
ZL0135-0A
Page 8 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
10. Click the Update IP Settings button. The Change IP Settings confirmation dialog will appear.
Confirm that the settings you entered are correct and click the Change and Restart button. The E8951 will reset and power up
with the new settings. If you watch the Veris Toolbox screen, the entry for the old address will soon show a lost connection.
Eventually a new entry with the new IP address will appear and the old entry will be deleted.
11. Disconnect the E8951 and connect it to the network on which it will be used.
Using the GUI to Set Up the IP Address for Use on Your Network
1. Connect a standard CAT5 Ethernet cable between a PC and E8951. If the user followed the Installation procedure in this
document, then this cable is already in place.
Ethernet/BACnet IP
port location
2. Temporarily change the IP address of the PC to a static value on the same subnet as the E8951. For example: If the E8951 is set
to its factory default IP address of 192.168.1.24, set the PC to an unused static IP address on the 192.168.1.xxx subnet (where
xxx is any value between 1 and 255, except 24). Set the subnet mask to 255.255.255.0 (the screen captures in this example
were taken using Windows 7; other operating systems will look different).
a. Open the Control Panel:
b. In the Control Panel, select Network and Sharing Center. In the Sharing Center, select Change Adapter Settings in the list at
the upper left corner.
c. Select the connection for the network that the E8951 is included on.
When the Local Area Connection Status dialog box appears, click on Properties.
ZL0135-0A
Page 9 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Configuration (cont.)
d. Highlight Internet Protocol Version 4 (TCP/IPv4), and click OK.
e. Select <Use the following IP Address>. Make note of the IP address that appears, then enter the static IP address (e.g. if
the E8951 is still set to its default address of 192.168.1.24, then change it to 192.168.1.100). Enter 255.255.255.0 for the subnet
mask. Click OK.
ZL0135-0A
Page 10 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Configuration (cont.)
Enter static
IP address
Enter subnet
mask
f. Click OK.
3. Open a PC web browser and enter the IP address of the E8951 (default address is 192.168.1.24) to access the GUI. The GUI
launches and appears in the browser window.
4. When finished using the GUI, unplug the Ethernet cable from the PC and restore the IP settings as needed.
5. Access the GUI according the instructions in the “Accessing the Graphical User Interface” section.
To set the IP address parameters, click the Network Settings button. The Network Settings overlay appears.
ZL0135-0A
Page 11 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Configuration (cont.)
Have the desired IP settings ready in advance (contact the system administrator). IP parameters for use with BACnet IP are
static, not dynamic.
6. Set the IP address for use on the BACnet/IP network:
a. From the navigation tree (left column) on the GUI, click on Setup and then Network Settings to enter the Edit IP Address
Settings menu.
b. Enter the desired IP address in the N1_IP_Address field (in the format xxx.xxx.xxx.xxx)
c. If necessary, change the Subnet Mask by entering the appropriate new value in the N1_Netmask field
d. If the E8951 is connected to an Ethernet gateway, enter its IP address in the Default Gateway field. This is especially critical if
the E8951 will be used as a BACnet BBMD device.
e. Click the Update IP button and wait for the E8951 to fully initialize.
f. If the IP address was changed to a different subnet, disconnect the E8951 from the PC or subnet it was on for configuration
and connect it to the subnet it is now configured to match. The GUI will only connect when the E8951 is installed on a network
that matches the settings and the new IP address is entered into a web browser on a PC properly configured for the network.
ZL0135-0A
Page 12 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
Using the GUI to Set the Configuration Parameters for the Communication Protocols
You can fully configure the product for any protocol mode using a web browser via Ethernet to run the GUI. Access the GUI
according the instructions in the “Accessing the Graphical User Interface” section.
The home screen on the GUI provides fields for configuration of the E8951. Each option field has a Submit button to the right.
When changing the value in any field, click Submit to enter and store the new value. The GUI prompts the user to restart the
system. Changes to the first three parameters will affect which other parameters are visible, so you should restart your system
after submitting a change to any of these. If multiple values (other than the first three parameters) are changed, it is easiest
to submit all changes and restart only once when finished with the entire screen. Press the Submit button to the right of any
parameter you change to apply it before changing a different one. To restart, click the System Restart button in the row at the
bottom of the screen. The restart takes several seconds, during which the server may lose its connection. Messages appear at the
top of the screen indicating current status, but do not perform any actions. Simply allow the tool to complete the restart cycle.
The first selection in the GUI is Config_Method, which has two choices: “0 = DIP Switches” or “1 = GUI”. (Note: If you change
this mode, restart the E8951 using the Restart System button at the bottom of the page and wait for the page to reload before
proceeding). The unit is shipped with this set to 0 so that it can be configured for simple applications by simply setting the DIP
switches (like the previous model E8950). To use this method, leave this setting at 0, and use the DIP switches as directed in the
Installation section. You can use the GUI just to set the basic BACnet parameters or access them via BACnet.
To use the full set of functionality, set Config_Method to 1 and restart the E8951 by pressing the Restart System button at the
bottom of the page.
When the unit powers back up and the GUI web page refreshes, continue.
The second selection is:
1. Locked: Used for all normal product operation. It is provided as a tool for high-level technical support. The gateway retains
its current profile configuration when powered.
2. Discovery mode (default): Deletes profiles and rediscovers them when the device is powered again. The results are the same,
unless the profile configuration is intentionally altered. Profile selection and discovery are especially important when using
BACnet or SNMP protocols. For normal operation, always use discovery mode.
The third selection in the GUI is Protocol_Mode, used to select the combination of protocols the product communicates with.
The E8951 supports four protocols, some of which can operate simultaneously. The table below shows which protocols are
supported in each mode.
ZL0135-0A
Page 13 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
Protocol Mode
1
Primary Protocol
Ethernet Protocol
RS-485 Protocol
BACnet MS/TP
Modbus TCP
BACnet MS/TP
2
BACnet IP
BACnet IP/Modbus TCP
Modbus RTU
3
SNMP
SNMP/Modbus TCP
Modbus RTU
4
Modbus
Modbus TCP
Modbus RTU
To select a primary protocol mode, enter the corresponding number into the text field adjacent to the Primary Protocol option and
click the Submit button to the left of the text field. A prompt appears at the top of the screen instructing the user to restart the
system. When finished, the screen refreshes itself with the appropriate fields for the selected mode.
The next GUI selection, in any protocol mode, is the Downstream_Baud rate selection. This baud rate and the baud rate of all
attached Modbus Meters must all be set to the same value.
Note - Parity is not used for downstream devices. The Parity setting of all downstream Modbus meters should be set to “None”.
If you have selected BACnet IP, SNMP or Modbus mode, the next selection is Modbus_Address, which sets the Modbus
address(es) for the E8951 when access with Modbus RTU with the RS-485 serial connection.
The next selection (in BACnet IP, SNMP or Modbus modes) is Modbus_Parity, which sets the parity of the upstream serial
connection. If using Modbus RTU protocol, set this to match your Modbus master. If not, ignore this field.
The following sections show the field selections (with factory default values) specific to each of the four Protocol_Modes.
ZL0135-0A
Page 14 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
1. BACnet MS/TP protocol mode
The DeviceID_Offset parameter is used to assign Device_IDs on power-up or on restart until they have been overwritten via
BACnet. Enter a different value here and click submit. The new value is first used at the next power-up or system restart. Valid
Device_ID numbers range from 1 to 4194303. Since the numbers assigned during discovery are the sum of the Offset and the
Modbus address (which can be any value from 1 to 247), the Offset values entered in the GUI must be no larger than 4194057.
ZL0135-0A
Page 15 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
The E8951 gateway creates a BACnet virtual router and separate BACnet devices for each device discovered at every Modbus
address polled behind this virtual router, allowing the devices to be discoverable and independently accessed via BACnet, even
if the virtual router is connected by MS/TP, using a single MAC address. To use this product with MS/TP, the BACnet system must
support the discovery and use of a BACnet router on the MS/TP trunk and any devices beyond it. This virtual router creates an
exclusive BACnet network on which the meter’s BACnet devices reside. This network must have a BACnet network number that
is different from any other networks in the entire BACnet enterprise. When multiple E8951 products are added anywhere in the
enterprise, each one must have a unique network number. Failure to set an exclusive value in this field causes communication
conflicts in the BACnet system.
Enter a non-conflicting value for the DeviceID_Offset parameter and click Submit. Valid network numbers range from 1 to
65534; if other values are entered, the network number defaults to 5. The new value is first used at the next power-up or system
restart. If using an external BACnet router to connect the E8951 as an MS/TP device, it is recommended that the router also be
restarted after the E8951 has completed discovery, when the network number is changed.
The next field for the BACnet MS/TP protocol mode is the MSTP_Max_Master, which allows this value to be set prior to using
BACnet software to access the E8951. The default value of 127 works regardless of the addresses the MS/TP network uses, but
selecting a lower value may optimize the network. Do not set this value lower than the highest address on the network. To set this
value via BACnet, write to the Max_Master property of the device object for the E8951’s virtual router.
The next field for the BACnet MS/TP protocol mode is the MSTP_MAC_Addr, which sets the MAC address for the virtual router.
The E8951 panel(s) are devices on the internal BACnet network and are not directly addressable as MAC addresses on the MS/TP
network.
The final field for the BACnet MS/TP mode is E3x_RTC_Control, which is only relevant if E3xAxxx meters are used with the
E8951. This parameter selects which protocol (BACnet or Modbus) has write access to the RTC (Real Time Clock) on E3xA products.
If 0 (BACnet) is selected, the RTC is set using the BACnet Time Synchronization service. If 1 (Modbus) is selected, the RTC is set by
writing to the appropriate Modbus registers.
ZL0135-0A
Page 16 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
2. BACnet IP protocol mode
BACnet IP mode uses the same DeviceID_Offset, Virt_Router_Net and E3x_RTC_Control parameters described above for
BACnet MS/TP mode. One additional parameter, BACnet_IP_Port, is used to set the UDP port. Most BACnet systems use the
default port (47808 decimal, 0xBAC0 hex) that is recommended in the BACnet standard as the only UDP port. Some large systems
need to segment the enterprise and use more than one port. If so, enter the number of the port you need to use to access this
device. BACnet IP mode does not use MSTP_Max_Master or MSTP_MAC_Addr.
ZL0135-0A
Page 17 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
BACnet IP mode adds another field called BBMD_Enable. See “BACnet Broadcast Management Device (BBMD) Support” on page
22 for a full description of how to enable and use BBMD support.
3. Simple Network Management Protocol (SNMP) mode
Note: SNMP mode only supports a single E30A/E31A meter with up to 84 circuits. It does not support more than one E30A/E31A or
other meters. Firmware version V1.023 or higher must be installed and address DIP switches must be set to address 1.
SNMP mode uses four unique parameters. The SNMP_Community strings are used to control access to the device. Whatever
values are entered here must also be used in the MIB browser or SNMP access software to communicate with this device. The
Read_Community string is used to enable reading data. The Write_Community string is used to enable writing data. The
Trap_Community string is used to enable the receipt of event notifications.
The last parameter, SNMP_Notif_IP is used to set the IP address of the client that used to receive SNMP event notifications, such
as alarms.
Operating the E8951
Restart the E8951 by using the button at the bottom of the GUI or by cycling the power. It takes about 30 seconds to initialize
completely and be ready for external communication.
ZL0135-0A
Page 18 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Configuration (cont.)
TM
Profile Assignment
Profile assignment in Discovery mode is automatic. Upon power-up/reset, with the device in Discovery mode (DIP switch S3 is to
the right), each Modbus address is queried for a slave ID. Any devices that respond with a slave ID matching a supported device are
given a unique device object and a full set of data objects to match the device.
All supported Veris meters are discovered and assigned one of the profiles (see ”Appendix 1: Data Objects for Supported Metering
Devices” on page 24) if they are connected, powered, and configured properly.
The Add/Remove/Edit buttons on the GUI can be used to alter the assignments, but this is not recommended for general use, as
the profiles could be assigned to products they do not support. If a meter is not discovered because it is not connected, powered,
or configured properly, adding the profile manually will not make it work. Any changes to the profile assignments made manually
through the GUI will be discarded when the E8951 is power-cycled or reset in Discovery mode.
Turn on the E8951
1. Set the configuration mode switch (S3) to the Discovery position.
2. Apply power to the E8951. It can take up to 2-3 minutes to discover all the Modbus RTU meters, build a configuration file, and
install the device on BACnet MS/TP. Scanning begins at address 1 and continues in numerical sequence, mapping meters as
they are discovered. To shorten this time, use lower Modbus addresses for the meters so that they will be discovered and
mapped more quickly. After the meters at the lower addresses are discovered, the E8951 continues scanning the remaining
addresses in the background, without affecting operation.
3. Optional: Lock the configuration. If no more devices will be added to or removed from the Modbus trunk, lock the device
mapping by setting the mode from Discovery to Locked (slide DIP switch S3 to the left or change the corresponding setting in
the GUI). This causes the E8951 to set up the same devices at power-up, without repeating the Discovery process. In Normal
mode, the power-up time improves, but BACnet devices are created whether the device responds or not, and new devices are
not discovered.
Configuration Mode
S3
Normal

Discovery

Determine the best mode for the application. Discovery mode queries and re-discovers devices each time the E8951 is powercycled or reset, so use this mode when you anticipate adding, removing, or changing Modbus devices. Locked mode creates the
same set of BACnet device objects when the E8951 is power-cycled or reset, even if objects change, are removed, or cease to
communicate. Power-up time is faster in Locked mode.
ZL0135-0A
Page 19 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
BACnet Programming
Information
TM
BACnet PICS (Protocol Implementation Conformance Statement)
Vendor Name: Veris Industries
BACnet Vendor ID 133
Product Name: E8951 Modbus-to-BACnet Protocol Converter
Product Model Number: E8951 w/Modbus Energy Meter
Product Description: Modbus-to-BACnet Protocol Converter
Protocol Conversions: Converts Modbus RTU to BACnet IP and BACnet MS/TP for supported products from Veris Industries
BACnet Protocol Version: Version 1 Revision 12
BACnet Standardized Device Profile (Annex L) – [Note: E8951 is a gateway device]
• BACnet Application Specific Controller (B-ASC)
BACnet Interoperability Building Blocks Supported (Annex K):
• K.1.2 BIBB - Data Sharing - ReadProperty-B (DS-RP-B)
• K.1.4 BIBB - Data Sharing - ReadPropertyMultiple-B (DS-RPM-B)
• K.1.8 BIBB - Data Sharing - WriteProperty-B (DS-WP-B)
• K.1.10 BIBB - Data Sharing - WritePropertyMultiple-B (DS-WPM-B)
• K.1.12 BIBB - Data Sharing - COV-B (DS-COV-B)
• K.2.2 BIBB - Alarm and Event - Notification Internal-B (AE-N-I-B)
• K.2.5 BIBB - Alarm and Event - ACK-B (AE-ACK-B)
• K.2.11 BIBB - Alarm and Event - Information-B (AE-INFO-B)
• K.5.2 BIBB - Device Management - Dynamic Device Binding-B (DM-DDB-B)
• K.5.4 BIBB - Device Management - Dynamic Object Binding-B (DM-DOB-B)
• K.5.6 BIBB - Device Management - DeviceCommunicationControl-B (DM-DCC-B)
• K.5.12 BIBB - Device Management - TimeSyncronization-B (DM-TS-B)
• K.5.22 BIBB - Device Management - List Manipulation-B (DM-LM-B)
Standard Object Types Supported
• Device Object
• Analog Input
• Analog Output*
• Analog Value
• Binary Input*
• Binary Output*
• Binary Value*
• Multi State Input*
• Multi State Output*
• Multi State Value*
• Notification Class Object*
* Supported by device driver, but not used by current device profiles
Unsupported Properties and Restrictions
• Does not support BACnet CreateObject
• Does not support BACnet DeleteObject
• Does not support any proprietary properties
• No proprietary properties exist
• No range restrictions exist
• Max_Master is writable, but it reverts to 127 when the E8951 is reset or powered-up.
Data Link Layer Options:
• BACnet IP, (Annex J)
ZL0135-0A
Page 20 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
BACnet Programming
Information
(cont.)
TM
• MS/TP master (Clause 9), baud rate up to 76.8 kbps
Networking Options:
• BACnet/IP Broadcast Management Device (BBMD)
• Registrations by Foreign Devices
Character Sets Supported:
• ISO 10646 (UTF-8) / ANSI X3.4
General Programming Information
The E8951, in Discovery mode, queries each Modbus address, from 1 to 247 for a slave ID. For each address queried, if a meter
responds with a slave_ID that matches those supported by the E8951, a BACnet device object and a full set of data objects are
created (see ”Appendix 1: Data Objects for Supported Metering Devices” on page 24).
The initial Object_Identifier (Device_ID) property value of each device object discovered is the sum of the Device_ID offset
programmed into the E8951 and the Modbus address of the meter. The factory default value of the offset is 50000; use the GUI
to change this value. The new value will be applied the next time the E8951 is power cycled or reset. Once a device’s Object_
Identifier is overwritten, changes to the ID Offset will no longer affect that Object_Identifier, even in Discovery mode. Make
further changes to the value by writing the Object_Identifier property.
The default Object_Name property value of each device object is an abbreviated name of the meter series discovered with
an underscore and the Modbus address of the meter appended to it. The Object_Name is a writable property. Once a device’s
Object_Name is overwritten, the Object_Name will not revert to the initial default, even in Discovery mode. Make further
changes to the value by writing the Object_Name property.
The default description property value of each device object is the Modbus slave ID returned by the meter discovered. The
description is not a writable property.
The E8951 supports Subscribe_COV, with default COV increment values assigned as shown in the data object tables (see
”Appendix 3: Quick Guide to Calculate the Number of Meters Supported” on page 162). If these values are not appropriate for a
specific application, write them as needed when they are subscribed. On subsequent power cycles, no subscriptions are active and
the COV increments return to their default values.
With few exceptions, any data values written to AV objects are accepted (without error) by the data object and passed through
to the corresponding Modbus register. There is no direct indication via the BACnet protocol if invalid values are rejected. After an
invalid value is written to the Present_Value of an AV, subsequent reads of that property return the new (invalid) value until the
next time the E8951 scans and updates the AV objects (this may take several seconds, depending on the overall configuration and
timing of the scan sequence). The tables in Appendix 1 specify valid values for AV objects of each supported model.
BACnet Network Management – Important Steps to Avoid Conflicts
BACnet configuration uses two default settings that might need to be changed, depending on the application.
a. Virtual router network ID number. Every logical network segment (IP subnet, MS/TP trunk, etc.) in an entire system must
have a (16-bit) network ID number that is unique from all other BACnet networks in the enterprise. The BACnet network
administrator assigns this network ID so that no two ID numbers conflict (whether using BACnet/IP or MS/TP). Within each
segment, every device is physically identified by the combination of its 8-bit MAC address and the 16-bit network ID number.
To support multiple meter panels (panel 1 and panel 2 are separate) with a single gateway, the E8951 creates a virtual BACnet
router that presents multiple BACnet devices using a single (its own) MS/TP MAC address. Each E8951 must have its own
(internal) network ID, and it creates a device object for itself and one for each Modbus address discovered.
The factory default network address is 50 (decimal). If that number is already in use in the system, assign a unique address
using the GUI on the built-in web server (this requires an Ethernet connection to a web browser; see “BACnet Programming
Information” on page 20 for instructions on changing configuration settings using the GUI). Valid network numbers range
from 1 to 65534; if other values are entered, the network number defaults to 5.
ZL0135-0A
Page 21 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
BACnet Programming
Information (cont.)
TM
b. Device_ID Offset. Every BACnet device must have a BACnet Device_ID number that is unique throughout the entire
enterprise. Since the E8951 presents every Modbus meter as a BACnet device, each connected meter that has a Modbus address
must have a BACnet Device_ID.
By default, each device discovered receives a Device_ID number that is the sum of an offset value (default is 50000) and
the Modbus address of the device. If these Device_ID numbers cause a conflict with existing devices in the system, or if the
system includes multiple E8951, change the Device_ID numbers before connecting the E8951 to the system. This can be
managed one of two ways:
i. Connect to the E8951 directly (offline from the system) with the devices (meters). After the E8951 discovers the devices
and assigns their default ID numbers, the user can choose new Device_ID values and write these to each device using
BACnet software. Subsequent discoveries will not overwrite these values with defaults even if the E8951 is then set to
Discovery mode.
ii. Use the GUI on the built-in web server to modify the offset value used to calculate default Device_IDs in the discovery
process (this requires an Ethernet connection to a web browser; see “BACnet Programming Information” on page 20
for instructions on changing configuration settings using the GUI). The E8951 retains this offset value and uses it to assign
Device_ID numbers every time power is cycled if the E8951 is in Discovery mode. Valid Device_ID numbers range from 1
to 4194303. Since the numbers assigned during discovery are the sum of the Offset and the Modbus address (which can be
any value from 1 to 247), any Offset values entered in the GUI must be less than 4194057.
BACnet Broadcast Management Device (BBMD) Support
When the E8951 is in BACnet IP mode, it can be configured as a BBMD device by entering “BBMD” in the Enable BBMD Support
field in the GUI, adding devices to a comma separated value text file named bdt.ini, and loading it onto the device. The example
below shows the syntax required for the bdt.ini file. All lines beginning with two forward slashes are interpreted as comments.
Use exactly one line per device added, separated by commas (no spaces). The file must include an entry (line) for each BBMD device
in the BACnet enterprise, including the E8951 itself. Note: the default gateway address in the network setup must be correct for
BBMD support to operate correctly. Once edited, upload the btd.ini file to the gateway through the GUI. Click the <Diagnostics and
Debugging> button in the lower right corner of the GUI and follow the folder tree under Navigation to the following folder: “Veris
E8951 Gateway/Setup/File Transfer.” Select the “General” tab (this is important - using the wrong tab can overwrite critical files).
Click the <Browse> button and select your bdt.ini file. Then click <Submit>. The GUI quickly indicates “The file was updated
successfully.” Click the <System Restart> button, click <OK> on the confirmation dialog and wait for the gateway to reinitialize
(takes about 30 seconds). BBMD changes are made by uploading a new btd.ini file. After setting the GUI to enable BBMD support
and transferring a new or revised bdt.ini file, restart the E8951 to load the file. BBMD support can be disabled in the GUI by
entering “-” (a hyphen) in the Enable BBMD Support filed in the GUI.
// Bdt.ini
// The format of this table must be (without the forward slashes - they are comment indicators):
//
//BBMD IP_Address , BBMD port , BBMD subnet Mask
//
147.26.116.217,47808,255.255.255.255
172.16.17.198,47808,255.255.255.255
ZL0135-0A
Page 22 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Troubleshooting
TM
Issue
Solution
Use the main screen of the E8951 GUI to confirm which meters have been discovered.
Verify that the Modbus device is a model specifically supported by the E8951 (see “Appendix 1:
Data Objects for Supported Metering Devices” on page 24).
Verify that the meter is connected to a control power source and is operating normally.
Modbus device is not discovered as expected.
Verify that the Modbus 2-wire RS-485 connection is correctly wired from the E8951 to all
other Modbus devices and that the chain is terminated at both ends with 120 Ω resistors (not
included).
Verify that the Modbus RTU baud is set to the same rate on all Modbus devices and that parity
on all devices is set to “none.”
Verify that the E8951 is powered and operating (the light green LED is on).
Verify that the E8951 is in Discovery mode.
China RoHS
Compliance
Information
(EFUP Table)
产品中有毒有害物质或元素的名称及含量Substances
部件名称
铅 (Pb) 汞 (Hg)
电子线路板
X
O
镉 (Cd)
六价铬 (Cr(VI))
多溴联苯(PBB)
多溴二苯醚(PBDE)
O
O
O
O
O = 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下.
X = 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求.
Z000057-0A
ZL0135-0A
Page 23 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data
Objects for Supported
Metering Devices
Enercept H8035 Series Energy Meters (all models)
The H8035 Series has three data objects and operates at 9600 baud.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated real energy
AI1
kWH
0
40259/40260
kW: Total
Total instantaneous real power
AI2
kW
1
40261/40262
AV1
n/a
32767
40001
Analog_value Objects (can be written as well as read)
kWh Energy Reset
ZL0135-0A
Write zero to reset
Page 24 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
Enercept H8036 Series Energy Meters (all models)
The H8036 Series has 28 data objects and operates at 9600 baud.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
40259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
40261/262
kVAR: Total
Total Instantaneous Reactive Power
AI3
kVAR
1
40263/264
kVA: Total
Total Instantaneous Apparent Power
AI4
kVA
1
40265/266
PF: Total
Total Power Factor
AI5
PF
0.01
40267/268
Volts: L-L Avg
Voltage L-L average of active phases
AI6
Volts
5
40269/270
Volts: L-N Avg
Voltage L-N average of active phases
AI7
Volts
5
40271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
40273/274
kW: Ph A
Instantaneous Real Power Phase A
AI9
kW
1
40275/276
kW: Ph B
Instantaneous Real Power Phase B
AI10
kW
1
40277/278
kW: Ph C
Instantaneous Real Power Phase C
AI11
kW
1
40279/280
PF: Ph A
Instantaneous Power Factor Phase A
AI12
PF
0.01
40281/282
PF: Ph B
Instantaneous Power Factor Phase B
AI13
PF
0.01
40283/284
AI14
PF: Ph C
Instantaneous Power Factor Phase C
PF
0.01
40285/286
Volts: Ph A-B
Instantaneous Voltage Phase A to Phase B AI15
Volts
5
40287/288
Volts: Ph B-C
Instantaneous Voltage Phase B to Phase C
Volts
5
40289/290
AI16
Volts: Ph A-C
Instantaneous Voltage Phase A to Phase C
AI17
Volts
5
40291/292
Volts: Ph A-N
Instantaneous Voltage Phase A to Neutral
AI18
Volts
5
40293/294
Volts: Ph B-N
Instantaneous Voltage Phase B to Neutral
AI19
Volts
5
40295/296
Volts: Ph C-N
Instantaneous Voltage Phase C to Neutral
AI20
Volts
5
40297/298
Amps: Ph A
Instantaneous Current Phase A
AI21
Amps
5
40299/300
Amps: Ph B
Instantaneous Current Phase B
AI22
Amps
5
40301/302
Amps: Ph C
Instantaneous Current Phase C
AI23
Amps
5
40303/304
kW: Average
Average Real Power since last reset
AI24
kW
1
40305/306
kW: Min
Minimum Real Power since last reset
AI25
kW
1
40307/308
kW: Max
Maximum Real Power since last reset
AI26
kW
1
40309/310
Analog_Value Objects (can be written as well as read)
kWh Energy Reset
Write Zero to reset
AV1
n/a
32767
40001
kW Average, Min, Max
Reset
Write Zero to reset
AV2
n/a
32767
40026
ZL0135-0A
Page 25 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E50C2 and E50C3 Uni-Directional Energy Meters
The E50C2/C3 has 63 data objects and operates at 9600, 19200 or 38400 baud. The E8951 does not support the logging functionality of the E50C3.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
261/262
kVAR: Total
Total Instantaneous Reactive Power
AI3
kVAR
1
263/264
KVA: Total
Total Instantaneous Apparent Power
AI4
kVA
1
265/266
PF: Total
Total Instantaneous Power Factor
AI5
PF
0.01
267/268
Volts: L-L Avg
Voltage L-L average of active phases
AI6
Volts
5
269/270
Volts: L-N Avg
Voltage L-N average of active phases
AI7
Volts
5
271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
273/274
kW: Ph A
Instantaneous Real Power Phase A
AI9
kW
1
275/276
kW: Ph B
Instantaneous Real Power Phase B
AI10
kW
1
277/278
kW: Ph C
Instantaneous Real Power Phase C
AI11
kW
1
279/280
PF: Ph A
Instantaneous Power Factor Phase A
AI12
PF
0.01
281/282
PF: Ph B
Instantaneous Power Factor Phase B
AI13
PF
0.01
283/284
PF: Ph C
Instantaneous Power Factor Phase C
AI14
PF
0.01
285/286
Volts: Ph A-B
Instantaneous Voltage Phase A to Phase B AI15
Volts
5
287/288
Volts: Ph B-C
Instantaneous Voltage Phase B to Phase C
AI16
Volts
5
289/290
Volts: Ph A-C
Instantaneous Voltage Phase A to Phase C
AI17
Volts
5
291/292
Volts: Ph A-N
Instantaneous Voltage Phase A to Neutral
AI18
Volts
5
293/294
Volts: Ph B-N
Instantaneous Voltage Phase B to Neutral
AI19
Volts
5
295/296
Volts: Ph C-N
Instantaneous Voltage Phase C to Neutral
AI20
Volts
5
297/298
Amps: Ph A
Instantaneous Current Phase A
AI21
Amps
5
299/300
Resolution is limited by data type (when value exceeds 7
digits, reset more often to maximize resolution)
Amps: Ph B
Instantaneous Current Phase B
AI22
Amps
5
301/302
Amps: Ph C
Instantaneous Current Phase C
AI23
Amps
5
303/304
Reserved
Reserved
AI24
n/a
0
305/306
Frequency
Instantaneous Frequency
AI25
Hz
0.01
307/308
Returns QNAN if frequency is out of range (or no voltage
input present on Phase A)
kVAh: Total
Accumulated Apparent Energy
Consumption
AI26
kWh
0
309/310
The UNITS property of this object reports kWh because there
is no unit type in this verision of the BACnet standard for
kVARh.
kVARh: Total
Accumulated Reactive Energy
Consumption
AI27
kWh
0
311/312
The UNITS property of this object reports kWh because there
is no unit type in this verision of the BACnet standard for
kVARh.
kVA: Ph A
Instantaneous Apparent Power Phase A
AI28
kVA
1
313/314
kVA: Ph B
Instantaneous Apparent Power Phase B
AI29
kVA
1
315/316
kVA: Ph C
Instantaneous Apparent Power Phase C
AI30
kVA
1
317/318
kVAR: Ph A
Instantaneous Reactive Power Phase A
AI31
kVAR
1
319/320
kVAR: Ph B
Instantaneous Reactive Power Phase B
AI32
kVAR
1
321/322
kVAR: Ph C
Instantaneous Reactive Power Phase C
AI33
kVAR
1
323/324
ZL0135-0A
Page 26 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E50C2 and E50C3 Uni-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
kW: Demand
Total Real Power Present Demand
AI34
kW
1
325/326
kVAR: Demand
Total Reactive Power Present Demand
AI35
kVAR
1
327/328
kVA: Demand
Total Apparent Power Present Demand
AI36
kVA
1
329/330
kW: Max Demand
Total Real Power Max. Demand
AI37
kW
0
331/332
This retains the largest value measured for Total Real Power
Demand (AI34) for any single demand interval since the
Max Demand was last explicitly reset via AV1 (this also
resets when the demand interval changes).
kVAR: Max Demand
Total Reactive Power Max. Demand
AI38
kVAR
0
333/334
This retains the largest value measured for Total Reactive
Power Demand (AI35) for any single demand interval since
the Max Demand was last explicitly
reset via AV1 (this also resets when the demand interval
changes).
kVA: Max Demand
Total Apparent Power Max. Demand
AI39
kVA
0
335/336
This retains the largest value measured for Total Apparent
Power Demand (AI36) for any single demand interval since
the Max Demand was last explicitly
reset via AV1 (this also resets when the demand interval
changes).
Pulse Counter 1 (Real
Energy)
Pulse Counter 1 (Real Energy)
AI40
n/a
0
337/338
Contact closure counter for Real Energy pulse output. Check
Pulse setup on the LCD display for the weight of each pulse
output count. These values are derived from 32 bit integer
counter and roll over to 0 when the integer counters do.
Write 16498 (0x4072) to the Present_Value property of
Analog_Value object AV1 to reset both Pulse Counters to 0.
Pulse Counter 2
Pulse Counter 2
AI41
n/a
0
339/340
Contact closure counter for Reactive Energy pulse output.
Check Pulse setup on the LCD display for the weight of each
pulse output count. These values are derived from 32 bit
integer counter and roll over to 0 when the integer counters
do. Write 16498 (0x4072) to the Present_Value property of
Analog_Value object AV1 to reset both Pulse Counters to 0.
kWh: Ph A
Real Energy Consumption - Phase A
AI42
kWh
1
341/342
kWh: Ph B
Real Energy Consumption - Phase B
AI43
kWh
1
343/344
kWh: Ph C
Real Energy Consumption - Phase C
AI44
kWh
1
345/346
Max_Power
Max Power
AI45
kW
0
135
Reserved_AI77
(Reserved AI77)
AI46
n/a
65535
136
Energy_Resets
Count of Energy_Resets
AI47
n/a
0
147
Reserved_AI79
Reserved_AI79
AI48
n/a
65535
148
Reserved_AI80
Reserved_AI80
AI49
n/a
65535
151
Power_Up_Count
Count of Power Up Cycles
AI50
n/a
0
152
Output_Config
Output Configuration
AI51
n/a
0
153
Alarm Error Bitmap
Bitmap of all alarm bits
AI52
n/a
0
146
ZL0135-0A
Page 27 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E50C2 and E50C3 Uni-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_Value Objects (can be written as well as read)
Reset: write values to
reset configs
30078=Acc 21211=Dmd 21212=Max
16498=Puls
AV1
n/a
0
129
Reset (aka Command Register):
- Write 30078 (0x757E) to clear all Energy Accumulators to
0 (All).
- Write 21211 (0x52DB) to begin new Demand Sub-Interval
calculation cycle. Takes effect at the end of the next 1
second calculation cycle. Write no more frequently than
every 10 seconds.
- Write 21212 (0x52DC) to reset Max Demand values to
Present Demand Values. Takes effect at the end of the next
1 second calculation cycle. Write no more frequently than
every 10 seconds.
- Write 16498 (0x4072) to clear Pulse Counts to zero.
- Read always returns 0.
System Type (being
metered)
10=1ph 11=2ph 12=2ph+N 31=3ph-Y
40=3ph+N
AV2
n/a
0
130
10 = Single Phase: A + N
11 = Single Phase: A + B
12 = Single Split Phase: A + B + N
31 = 3 phase Δ, A + B + C, no N
40 = 3 phase Y, A + B + C + N
CT Ratio Primary
CT Ratio Primary (5A to 32000A)
AV3
Amps
0
131
Current Transducer Size - Primary Current Range
CT Ratio Secondary
CT Ratio Secondary (1=1VAC 3=1/3VAC)
AV4
n/a
0
132
Current Transducer Type – Secondary Interface
- Enter 1 for CTs with 1V outputs
- Enter 3 for CTs with 1/3V outputs
PT Ratio
Potential Transformer Ratio (1 = no PT)
AV5
n/a
0
133
PT Ratio: The meter scales this value by 100 (i.e. entering 200
yields a potential transformer ratio of 2:1). The default is
100 (1.00:1), which is with no PT attached. Set this value
before setting the system voltage (below)
System Voltage
Line-Line Voltage of Service Metered
AV6
Volts
0
134
System Voltage: This voltage is line to line, unless in system
type 10 (AV2), which is line to neutral.
The meter uses this value to calculate the full scale power
for the pulse configuration (below), and as full scale for
phase loss (AV8). The meter will refuse voltages outside the
range of 82-660 volts when divided by the PT Ratio (above).
Display Units
Display Units (0=IEC 1=iEEE)
AV7
n/a
0
137
Display Units:
0 = IEC (U, V, P, Q, S)
1 = IEEE (default: VLL, VLN, W, VAR, VA)
Phase Loss Voltage
Threshold
Phase Loss Thresh (% of System Voltage)
AV8
Percent
0
142
Phase Loss Voltage Threshold in percent of System Voltage
(in object AV6). Default is 10 (10%). Any phase (as
configured in AV2) whose level drops below this threshold
triggers a Phase Loss alert. E.g., if the System voltage is set
to 480 V L-L, the nominal L-N voltage for each phase should
be 277 V. When the threshold is set to 10%, if any phase
drops below 27.7 V, or if any L-L voltage drops below 48 V
the corresponding phase loss alarm bit is true.
ZL0135-0A
Page 28 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E50C2 and E50C3 Uni-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Phase Loss Imbalance
Threshold
Phase Loss Imbalance (% L-L variation)
AV9
Percent
0
143
Phase Loss Imbalance Threshold in Percent. Default is 25%
phase to phase difference. For a 3-phase Y (3 + N) system
type (40 in object AV2), both Line to Neutral and Line to
Line voltages are tested. In a 3-phase Δ System type (31 in
object AV2), only Line to Line voltages are examined. In a
single split-phase (2 + N) system type (12 in object AV2),
just the line to neutral voltage are compared. E.g., if the
System Type is 40 (3-phase with Neutral) and the Phase
Loss Imbalance Threshold is 25%, a Phase Imbalance is
indicated when the L-L voltage between any two phases
drops to less than 75% of the L-L voltage between any
other two phases or when the L-N voltage of any phase
drops to less than 75% of the L-N voltage of any other
phase.
Num of Sub-Intrvl per
Dem Intrvl
1=most recent; n(2-6)=avg of last n
AV10
n/a
0
149
Number of Sub-Intervals per Demand Interval. Sets the
number of sub-intervals that make a single demand
interval. For block demand, set this to 1. Default is 1. When
Sub-Interval Length (in object AV11) is set to 0 (sync-tocomms mode), the value of this object is ignored.
Sub-Interval Length
10 to 32767 seconds (0= Sync-toComms)
AV11
Seconds
0
150
Sub-Interval Length in hundredths of a second. For sync-tocomms mode, which allows manual triggering of demand
intervals and the logging of another Trend_Log record, set
this value to 0 and write 21211 to the reset register (object
AV1) each time the sub-interval must be externally reset.
Default is 90000 (15 minutes). This variable is tied directly
to the Log_Interval property of all three Trend_Log objects
(their value is always the same as this one). Changing any
of these four properties
changes all of them.
ZL0135-0A
Page 29 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E51C2 and E51C3 Bi-Directional Energy Meters
The E51C2/C3 has 94 data objects and operates at 9600, 19200 or 38400 baud. The E8951 does not support the logging functionality of the E51C3.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh: Net
Accumulated Net Real Energy
AI1
kWh
0
257/258
kWh: Import
Real Energy: Import (Quadrants 1 & 4)
AI2
kWh
0
259/260
Resolution is limited by data type (when value exceeds 7
digits; reset more often to maximize resolution)
kWh: Export
Real Energy: Export (Quadrants 2 & 3 )
AI3
kWh
0
261/262
kVARh: Quad 1
Reactive Energy: Quad 1 (Lags Import)
AI4
n/a
0
263/264
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVARh.
kVARh: Quad 2
Reactive Energy: Quad 2 (Leads Export)
AI5
n/a
0
265/266
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVARh.
kVARh: Quad 3
Reactive Energy: Quad 3 (Lags Export)
AI6
n/a
0
267/268
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVARh.
kVARh: Quad 4
Reactive Energy: Quad 4 (Leads Import)
AI7
n/a
0
269/270
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVARh.
kVAh: Net
Apparent Energy: Net
AI8
n/a
0
271/272
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVAh.
kVAh: Import
Apparent Energy: Import (Quads 1 & 4)
AI9
n/a
0
273/274
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVAh.
kVAh: Export
Apparent Energy: Export (Quads 2 & 3 )
AI10
n/a
0
275/276
The UNITS property of this object will report n/a because
there is no unit type in this verision of the BACnet standard
for kVAh.
kW: Total Net
Total Net Instantaneous Real Power
AI11
kW
1
277/278
kVAR: Total Net
Total Net Instantaneous Reactive Power
AI12
kVAR
1
279/280
kVA: Total Net
Total Net Instantaneous Apparent Power
AI13
kVA
1
281/282
PF: Total
Total Instantaneous Power Factor
AI14
PF
0.01
283/284
Volts: L-L Avg
Voltage L-L average of active phases
AI15
Volts
5
285/286
Volts: L-N Avg
Voltage L-N average of active phases
AI16
Volts
5
287/288
Amps: Avg
Current Avg of active phases
AI17
Amps
5
289/290
Frequency
Instantaneous Frequency
AI18
Hz
0.01
291/292
kW: Demand
Total Real Power Present Demand
AI19
kW
1
293/294
kVAR: Demand
Total Reactive Power Present Demand
AI20
kVAR
1
295/296
kVA: Demand
Total Apparent Power Present Demand
AI21
kVA
1
297/298
kW: Total Import Max.
Demand
Total Import Real Power Max. Demand
AI22
kW
0
299/300
ZL0135-0A
Page 30 of 162
Will return QNAN if frequency is out of range (or no voltage
input present on Phase A)
This retains the largest positive (Import) value measured for
Total Real Power Demand (AI19) for any single demand
interval since the Max Demand were last explicitly reset
via AV1 (this is also reset when the demand interval is
changed).
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E51C2 and E51C3 Bi-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
kVAR: Total Import Max. Total Import Reactive Power Max.
Demand
Demand
AI23
kVAR
0
301/302
This retains the largest positive (Import) value measured for
Total Reactive Power Demand (AI20) for any single demand
interval since the Max Demand were last explicitly reset
via AV1 (this is also reset when the demand interval is
changed).
kVA: Total Import Max.
Demand
Total Import Apparent Power Max.
Demand
AI24
kVA
0
303/304
This retains the largest positive (Import) value measured
for Total Apparent Power Demand (AI21) for any single
demand interval since the Max Demand were last explicitly
reset via AV1 (this is also reset when the demand interval is
changed).
kW: Total Export Max.
Demand
Total Export Real Power Max. Demand
AI25
kW
0
305/306
This retains the largest negative (Export) value measured
for Total Real Power Demand (AI19) for any single demand
interval since the Max Demand were last explicitly reset
via AV1 (this is also reset when the demand interval is
changed).
kVAR: Total Export Max.
Demand
Total Export Reactive Power Max.
Demand
AI26
kVAR
0
307/308
This retains the largest negative (Export) value measured for
Total Reactive Power Demand (AI20) for any single demand
interval since the Max Demand were last explicitly reset
via AV1 (this is also reset when the demand interval is
changed).
kVA: Total Export Max.
Demand
Total Export Apparent Power Max.
Demand
AI27
kVA
0
309/310
This retains the largest negative (Export) value measured
for Total Apparent Power Demand (AI21) for any single
demand interval since the Max Demand were last explicitly
reset via AV1 (this is also reset when the demand interval is
changed).
Reserved_AI28
(Reserved_AI28)
AI28
kVA
1
311/312
This retains the largest negative (Export) value measured
for Total Apparent Power Demand (AI21) for any single
demand interval since the Max Demand were last explicitly
reset via AV1 (this is also reset when the demand interval is
changed).
Pulse Counter 1 Import
Real Energy
Pulse Counter 1 Import Real Energy
AI29
n/a
0
313/314
Contact closure counter for Real Energy Import pulse output.
Check Pulse setup on the LCD display for the weight of each
pulse output count. These values are derived from 32 bit
integer counter and roll over to 0 when the integer counters
do.
Write 16498 (0x4072) to the Present_Value property of
Analog_Value object AV1 to reset both Pulse Counters to 0.
Pulse Counter 2 Export
Real Energy
Pulse Counter 2 Export Real Energy
AI30
n/a
0
315/316
Contact closure counter for Real Energy Export pulse output
(there is no physical output for this, but the pulses are
counted anyway). Check Pulse setup on the LCD display
for the weight of each pulse output count. These values
are derived from 32 bit integer counter and roll over to 0
when the integer counters do. Write 16498 (0x4072) to the
Present_Value property of Analog_Value object AV1 to reset
both Pulse Counters to 0.
kWh Energy: Import
Ph A
Accumulated Real Energy Import Ph A
AI31
kWh
0
317/318
kWh Energy: Import
Ph B
Accumulated Real Energy Import Ph B
AI32
kWh
0
319/320
kWh Energy: Import
Ph C
Accumulated Real Energy Import Ph C
AI33
kWh
0
321/322
kWh Energy: Export
Ph A
Accumulated Real Energy Export Ph A
AI34
kWh
0
323/324
kWh Energy: Export
Ph B
Accumulated Real Energy Export Ph B
AI35
kWh
0
325/326
ZL0135-0A
Page 31 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E51C2 and E51C3 Bi-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
kWh Energy: Export
Ph C
Accumulated Real Energy Export Ph C
AI36
kWh
0
327/328
kVARh: Q1 Ph A
Accumulated Q1 Reactive Energy Ph A
AI37
kWh
0
329/330
kVARh: Q1 Ph B
Accumulated Q1 Reactive Energy Ph B
AI38
kWh
0
331/332
kVARh: Q1 Ph C
Accumulated Q1 Reactive Energy Ph C
AI39
kWh
0
333/334
kVARh: Q2 Ph A
Accumulated Q2 Reactive Energy Ph A
AI40
kWh
0
335/336
kVARh: Q2 Ph B
Accumulated Q2 Reactive Energy Ph B
AI41
kWh
0
337/338
kVARh: Q2 Ph C
Accumulated Q2 Reactive Energy Ph C
AI42
kWh
0
339/340
kVARh: Q3 Ph A
Accumulated Q3 Reactive Energy Ph A
AI43
kWh
0
341/342
kVARh: Q3 Ph B
Accumulated Q3 Reactive Energy Ph B
AI44
kWh
0
343/344
kVARh: Q3 Ph C
Accumulated Q3 Reactive Energy Ph C
AI45
kWh
0
345/346
kVARh: Q4 Ph A
Accumulated Q4 Reactive Energy Ph A
AI46
kWh
0
347/348
kVARh: Q4 Ph B
Accumulated Q4 Reactive Energy Ph B
AI47
kWh
0
349/350
kVARh: Q4 Ph C
Accumulated Q4 Reactive Energy Ph C
AI48
kWh
0
351/352
kVAh: Import Ph A
Accumulated Appar. Energy Import Ph A
AI49
kWh
0
353/354
kVAh: Import Ph B
Accumulated Appar. Energy Import Ph B
AI50
kWh
0
355/356
kVAh: Import Ph C
Accumulated Appar. Energy Import Ph C
AI51
kWh
0
357/358
kVAh: Export Ph A
Accumulated Appar. Energy Export Ph A
AI52
kWh
0
359/360
kVAh: Export Ph B
Accumulated Appar. Energy Export Ph B
AI53
kWh
0
361/362
kVAh: Export Ph C
Accumulated Appar. Energy Export Ph C
AI54
kWh
0
363/364
kW: Ph A
Instantaneous Real Power Phase A
AI55
kW
1
365/366
kW: Ph B
Instantaneous Real Power Phase B
AI56
kW
1
367/368
kW: Ph C
Instantaneous Real Power Phase C
AI57
kW
1
369/370
kVAR: Ph A
Instantaneous Reactive Power Phase A
AI58
kVAR
1
371/372
kVAR: Ph B
Instantaneous Reactive Power Phase B
AI59
kVAR
1
373/374
kVAR: Ph C
Instantaneous Reactive Power Phase C
AI60
kVAR
1
375/376
kVA: Ph A
Instantaneous Apparent Power Phase A
AI61
kVA
1
377/378
kVA: Ph B
Instantaneous Apparent Power Phase B
AI62
kVA
1
379/380
kVA: Ph C
Instantaneous Apparent Power Phase C
AI63
kVA
1
381/382
PF: Ph A
Instantaneous Power Factor Phase A
AI64
PF
0.01
383/384
PF: Ph B
Instantaneous Power Factor Phase B
AI65
PF
0.01
385/386
PF: Ph C
Instantaneous Power Factor Phase C
AI66
PF
0.01
387/388
Volts: Ph A-B
Instantaneous Voltage Phase A to Phase B AI67
Volts
5
389/390
Volts: Ph B-C
Instantaneous Voltage Phase B to Phase C
AI68
Volts
5
391/392
Volts: Ph A-C
Instantaneous Voltage Phase A to Phase C
AI69
Volts
5
393/394
Volts: Ph A-N
Instantaneous Voltage Phase A to Neutral
AI70
Volts
5
395/396
Volts: Ph B-N
Instantaneous Voltage Phase B to Neutral
AI71
Volts
5
397/398
Volts: Ph C-N
Instantaneous Voltage Phase C to Neutral
AI72
Volts
5
399/400
Amps: Ph A
Instantaneous Current Phase A
AI73
Amps
5
401/402
Amps: Ph B
Instantaneous Current Phase B
AI74
Amps
5
403/404
ZL0135-0A
Page 32 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E51C2 and E51C3 Bi-Directional Energy Meters, cont.
Data Variable
Amps: Ph C
Description
Instantaneous Current Phase C
BACnet
Object
AI75
Units
Amps
COV_
Increment
5
Modbus
Address
Comments
405/406
Max_Power
Max Power
AI76
kW
0
135
Reserved_AI77
(Reserved AI77)
AI77
n/a
65535
136
Energy_Resets
Count of Energy_Resets
AI78
n/a
0
147
Reserved_AI79
Reserved_AI79
AI79
n/a
65535
148
Reserved_AI80
Reserved_AI80
AI80
n/a
65535
151
Power_Up_Count
Count of Power Up Cycles
AI81
n/a
0
152
Output_Config
Output Configuration
AI82
n/a
0
153
Alarm Error Bitmap
Bitmap of all alarm bits
AI83
n/a
0
146
Analog_Value Objects (can be written as well as read)
Reset: write values to
reset configs
30078=Acc 21211=Dmd 21212=Max
16498=Puls
AV1
n/a
0
129
Reset (aka Command Register):
- Write 30078 (0x757E) to clear all Energy Accumulators to
0 (All).
- Write 21211 (0x52DB) to begin new Demand Sub-Interval
calculation cycle. Takes effect at the end of the next 1 second
calculation cycle. For proper operation, write no more
frequently than every 10 seconds.
- Write 21212 (0x52DC) to reset Max Demand values to
Present Demand Values. Takes effect at the end of the next
1 second calculation cycle. For proper operation, write no
more frequently than every 10 seconds.
- Write 16498 (0x4072) to clear Pulse Counts to zero.
- Read always returns 0.
System Type (being
metered)
10=1ph 11=2ph 12=2ph+N 31=3ph-Y
40=3ph+N
AV2
n/a
0
130
10 = Single Phase: A + N
11 = Single Phase: A + B
12 = Single Split Phase: A + B +
31 = 3 phase Δ, A + B + C, no N
40 = 3 phase Y, A + B + C + N
CT Ratio Primary
CT Ratio Primary (5A to 32000A)
AV3
Amps
0
131
Current Transducer Size - Primary Current Range
CT Ratio Secondary
CT Ratio Secondary (1=1VAC 3=1/3VAC)
AV4
n/a
0
132
Current Transducer Type – Secondary Interface
- Enter 1 for CTs with 1V outputs
- Enter 3 for CTs with 1/3V outputs
PT Ratio
Potential Transformer Ratio (1= no PT)
AV5
n/a
0
133
PT Ratio: The meter scales this value by 100 (i.e. entering 200
yields a potential transformer ratio of 2:1). The default is 100
(1.00:1), which is with no PT attached. Set this value before
setting the system voltage (below)
System Voltage
Line-Line Voltage of Service Metered
AV6
Volts
0
134
System Voltage: This voltage is line to line, unless in system
type 10 (AV2), which is line to neutral.
The meter uses this value to calculate the full scale power for
the pulse configuration (below), and as full scale for phase
loss (AV8). The meter will refuse voltages that are outside
the range of 82-660 volts when divided by the PT Ratio
(above).
Display Units
Display Units (0=IEC 1=iEEE)
AV7
n/a
0
137
Display Units: 0 = IEC (U, V, P, Q, S), 1 = IEEE (default: VLL,
VLN, W, VAR, VA)
ZL0135-0A
Page 33 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E51C2 and E51C3 Bi-Directional Energy Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Phase Loss Voltage
Threshold
Phase Loss Thresh (% of System Voltage)
AV8
Percent
0
142
Phase Loss Voltage Threshold in percent of System Voltage (in
object AV6). Default is 10 (10%). Any phase (as configured in
AV2) whose level drops below this threshold triggers a Phase
Loss alert. E.g., if the System voltage is set to 480 V L-L,
the L-N voltage for each phase should be 277 V. When the
threshold is set to 10%, if any phase drops below 27.7, or if
any L-L voltage drops below 48 V, the corresponding phase
loss alarm bit will be true.
Phase Loss Imbalance
Threshold
Phase Loss Imbalance (% L-L variation)
AV9
Percent
0
143
Phase Loss Imbalance Threshold in Percent. Default is 25%
phase to phase difference. For a 3-phase Y (3 + N) system
type (40 in object AV2), both Line to Neutral and Line to Line
voltages are tested. In a 3-phase Δ System type (31 in object
AV2), only Line to Line voltages are examined. In a single
split-phase (2 + N) system type (12 in object AV2), just the
line to neutral voltage are compared. E.g., if the System Type
is 40 (3-phase with Neutral) and the Phase Loss Imbalance
Threshold is 25%, a Phase Imbalance is indicated when the
L-L voltage between any two phases drops to less than 75%
of the L-L voltage between any other two phases or when
the L-N voltage of any phase drops to less than 75% of the
L-N voltage of any other phase.
Num of Sub-Intrvl per
Dem Intrvl
1=most recent; n(2-6)=avg of last n
AV10
n/a
0
149
Number of Sub-Intervals per Demand Interval. Sets the
number of sub-intervals that make a single demand
interval. For block demand, set this to 1. Default is 1. When
Sub-Interval Length (in object AV11) is set to 0 (sync-tocomms mode), the value of this object is ignored.
Sub-Interval Length
10 to 32767 seconds (0= Sync-toComms)
AV11
Seconds
0
150
Sub-Interval Length in hundredths of a second. For sync-tocomms mode, which allows manual triggering of demand
intervals and the logging of another Trend_Log record, set
this value to 0 and write 21211 to the reset register (object
AV1) each time the sub-interval must be externally reset.
Default is 90000 (15 minutes). This variable is tied directly
to the Log_Interval property of all three Trend_Log objects
(their value is always the same as this one). Changing any of
these four properties changes all of them.
ZL0135-0A
Page 34 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8436 Series Energy Meters (H8436V, H8436VB & H8436VBS)
The H8436 has 34 data objects and operates at 9600 or 19200 baud.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
261/262
kVA: Total
Total Instantaneous Apparent Power
AI3
kVA
1
263/264
kVAR: Total
Total Instantaneous Reactive Power
AI4
kVAR
1
265/266
PF: Total
Total Instantaneous Power Factor
AI5
PF
0.01
267/268
Volts: L-L Avg
Voltage L-L average of active phases
AI6
Volts
5
269/270
Volts: L-N Avg
Voltage L-N average of active phases
AI7
Volts
5
271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
273/274
kW: Ph A
Instantaneous Real Power Phase A
AI9
kW
1
275/276
kW: Ph B
Instantaneous Real Power Phase B
AI10
kW
1
277/278
kW: Ph C
Instantaneous Real Power Phase C
AI11
kW
1
279/280
PF: Ph A
Instantaneous Power Factor Phase A
AI12
PF
0.01
281/282
PF: Ph B
Instantaneous Power Factor Phase B
AI13
PF
0.01
283/284
AI14
PF: Ph C
Instantaneous Power Factor Phase C
PF
0.01
285/286
Volts: Ph A-B
Instantaneous Voltage Phase A to Phase B AI15
Volts
5
287/288
Volts: Ph B-C
Instantaneous Voltage Phase B to Phase C
AI16
Volts
5
289/290
Volts: Ph A-C
Instantaneous Voltage Phase A to Phase C
AI17
Volts
5
291/292
Volts: Ph A-N
Instantaneous Voltage Phase A to Neutral
AI18
Volts
5
293/294
Volts: Ph B-N
Instantaneous Voltage Phase B to Neutral
AI19
Volts
5
295/296
Volts: Ph C-N
Instantaneous Voltage Phase C to Neutral
AI20
Volts
5
297/298
Amps: Ph A
Instantaneous Current Phase A
AI21
Amps
5
299/300
Amps: Ph B
Instantaneous Current Phase B
AI22
Amps
5
301/302
Amps: Ph C
Instantaneous Current Phase C
AI23
Amps
5
303/304
Alarm Error Bitmap
Alarm Error Bitmap
AI24
n/a
0
146
Count of Energy
Accumulator Resets
Count of Energy Accumulator Resets
AI25
n/a
0
147
Analog_Value Objects (can be written as well as read)
Reset: write values to
reset configs
30078= Clear All Accumulators
AV1
n/a
0
129
System Type
10, 11, 12, 30, 31, 32, 40, 42, 44
AV2
n/a
0
130
CT Ratio Primary
CT Ratio Primary (1A to 32767A)
AV3
n/a
0
131
CT Ratio Secondary
CT Ratio Secondary (1=1AC 5=5A)
AV4
n/a
0
132
PT Ratio Primary
Potential Transformer Ratio Primary
AV5
n/a
0
133
PT Ratio Scale (0 =
No PT)
0, 1, 10, 100 (0 = no PT)
AV6
n/a
0
134
PT Ratio Secondary
100, 110, 115, 120
AV7
n/a
0
135
Service Frequency
50 or 60 Hz
AV8
Hz
0
136
Display Units
Display Units (0=IEC 1=IEEE)
AV9
n/a
0
137
ZL0135-0A
Page 35 of 162
Reset:
- Write 30078 to clear all energy accumulators to 0 (All).
- Read always returns 0
Not used on H84xx-V models (reads 32768)
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8437 Series Energy Meters (H8437V, H8437VB & H8437VBS)
The H8437 has 66 data objects and operates at 9600 or 19200 baud.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
261/262
KVA: Total
Total Instantaneous Apparent Power
AI3
kVA
1
263/264
kVAR: Total
Total Instantaneous Reactive Power
AI4
kVAR
1
265/266
PF: Total
Total Instantaneous Power Factor
AI5
PF
0.01
267/268
Volts: L-L Avg
Voltage L-L average of active phases
AI6
Volts
5
269/270
Volts: L-N Avg
Voltage L-N average of active phases
AI7
Volts
5
271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
273/274
kW: Ph A
Instantaneous Real Power Phase A
AI9
kW
1
275/276
kW: Ph B
Instantaneous Real Power Phase B
AI10
kW
1
277/278
kW: Ph C
Instantaneous Real Power Phase C
AI11
kW
1
279/280
PF: Ph A
Instantaneous Power Factor Phase A
AI12
PF
0.01
281/282
PF: Ph B
Instantaneous Power Factor Phase B
AI13
PF
0.01
283/284
PF: Ph C
Instantaneous Power Factor Phase C
AI14
PF
0.01
285/286
Volts: Ph A-B
Instantaneous Voltage Phase A to Phase B AI15
Volts
5
287/288
Volts: Ph B-C
Instantaneous Voltage Phase B to Phase C
AI16
Volts
5
289/290
Volts: Ph A-C
Instantaneous Voltage Phase A to Phase C
AI17
Volts
5
291/292
Volts: Ph A-N
Instantaneous Voltage Phase A to Neutral
AI18
Volts
5
293/294
Volts: Ph B-N
Instantaneous Voltage Phase B to Neutral
AI19
Volts
5
295/296
Volts: Ph C-N
Instantaneous Voltage Phase C to Neutral
AI20
Volts
5
297/298
Amps: Ph A
Instantaneous Current Phase A
AI21
Amps
5
299/300
Amps: Ph B
Instantaneous Current Phase B
AI22
Amps
5
301/302
Amps: Ph C
Instantaneous Current Phase C
AI23
Amps
5
303/304
Amps: Neutral
Instantaneous Neutral Current
AI24
Amps
0.1
305/306
Frequency
Instantaneous Frequency
AI25
Hz
0.01
307/308
kW: Total Min
Total Real Power Minimum Value
AI26
kW
0
309/310
kW: Total Max
Total Real Power Maximum Value
AI27
kW
0
311/312
kVAh: Total
Accumulated Apparent Energy
Consumption
AI28
n/a
0
313/314
kVARh: Total
Accumulated Reactive Energy
Consumption
AI29
n/a
0
315/316
kVA: Ph A
Instantaneous Apparent Power Phase A
AI30
kVA
1
317/318
kVA: Ph B
Instantaneous Apparent Power Phase B
AI31
kVA
1
319/320
kVA: Ph C
Instantaneous Apparent Power Phase C
AI32
kVA
1
321/322
kVAR: Ph A
Instantaneous Reactive Power Phase A
AI33
kVAR
1
323/324
kVAR: Ph B
Instantaneous Reactive Power Phase B
AI34
kVAR
1
325/326
kVAR: Ph C
Instantaneous Reactive Power Phase C
AI35
kVAR
1
327/328
kW: Demand
Total Real Power Present Demand
AI36
kW
0
329/330
ZL0135-0A
Page 36 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8437 Series Energy Meters (H8437V, H8437VB & H8437VBS), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
kVA: Demand
Total Apparent Power Present Demand
AI37
kVA
0
331/332
kVAR: Demand
Total Reactive Power Present Demand
AI38
kVAR
0
333/334
kW: Max Demand
Total Real Power Max. Demand
AI39
kW
0
335/336
kVA: Max Demand
Total Apparent Power Max. Demand
AI40
kVA
0
337/338
kVAR: Max Demand
Total Reactive Power Max. Demand
AI41
kVAR
0
339/340
Comments
Usage Hours
Hours: >0.1A on at least one phase
AI42
Hours
0
341/342
Usage Minutes (0.059.9)
Minutes: >0.1A on at least one phase
AI43
Minutes
10
343/344
Total Hours
Total Hours since last timer reset
AI44
Hours
0
345/346
This combination timer counts the total time for which the
absolute current on at least one phase is >0.1 Amp.
Total Minutes (0.059.9)
Total Minutes since last timer reset
AI45
Minutes
10
347/348
This combination timer counts the total time for which the
absolute current on at least one phase is >0.1 Amp.
Percent Usage
Usage Hours / Total Hours
AI46
Percent
5
349/350
This timer counts the total time since the usage timer was
reset.
Percent Usage = Usage Time / Total Time .
Volts THD: Ph A-N
Instantaneous THD Voltage Ph A - Neutral
AI47
Percent
5
351/352
Volts THD: Ph B-N
Instantaneous THD Voltage Ph B - Neutral
AI48
Percent
5
353/354
Volts THD: Ph C-N
Instantaneous THD Voltage Ph C - Neutral
AI49
Percent
5
355/356
Volts THD: Ph A-B
Instantaneous THD Voltage Ph A - Ph B
AI50
Percent
5
357/358
Volts THD: Ph B-C
Instantaneous THD Voltage Ph B - Ph C
AI51
Percent
5
359/360
Volts THD: Ph A-C
Instantaneous THD Voltage Ph A - Ph C
AI52
Percent
5
361/362
Amps THD: Ph A
Instantaneous THD Current Phase A
AI53
Percent
5
363/364
Amps THD: Ph B
Instantaneous THD Current Phase B
AI54
Percent
5
365/366
Amps THD: Ph C
Instantaneous THD Current Phase C
AI55
Percent
5
367/368
Alarm Error Bitmap
Alarm Error Bitmap
AI56
n/a
0
146
Count of Energy
Accumulator Resets
Count of Energy Accumulator Resets
AI57
n/a
0
147
ZL0135-0A
Page 37 of 162
Error Bitmap:
bit 0: Phase A Voltage out of range
bit 1: Phase B Voltage out of range
bit 2: Phase C Voltage out of range
bit 3: Phase A Current out of range
bit 4: Phase B Current out of range
bit 5: Phase C Current out of range
bit 6: Frequency out of range or insufficient voltage on Phase
A to determine frequency range of 45-65 Hz.
bit 7: Reserved for future use
bit 8: Phase Loss A
bit 9: Phase Loss B
bit 10: Phase Loss C
bit 11-15: Reserved for future use
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8437 Series Energy Meters (H8437V, H8437VB & H8437VBS), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_value Objects (can be written as well as read)
Reset: write values to
reset configs
30078=Acc 14255=MnMx 21212=Dmd
10001=Tmr
AV1
n/a
0
129
System Type
10; 11; 12; 30; 31; 32; 40; 42; 44
AV2
n/a
0
130
CT Ratio Primary
CT Ratio Primary (1A to 32767A)
AV3
n/a
0
131
CT Ratio Secondary
CT Ratio Secondary (1=1AC 5=5A)
AV4
n/a
0
132
PT Ratio Primary
Potential Transformer Ratio Primary
AV5
n/a
0
133
PT Ratio Scale (0 =
No PT)
0; 1; 10; 100 (0 = no PT)
AV6
n/a
0
134
PT Ratio Secondary
100; 110; 115; 120
AV7
n/a
0
135
Reset:
- Write 30078 to clear all Energy Accumulators to 0 (All).
- Write 14255 to reset all Power Min/Max to Present Values
(H84xx EDS Only).
- Write 21212 to reset Peak Demand values to Present Demand
Values (H84xx EDS Only).
- Write 10001 to clear the Usage Timers to 0 (H84xx EDS Only).
- Read always returns 0
Not used on H84xxV (reads 32768)
Service Frequency
50 or 60 Hz
AV8
Hz
0
136
Display Units
Display Units (0=IEC 1=IEEE)
AV9
n/a
0
137
(Power) Demand Block
Interval
1 to 60 Minutes
AV10
n/a
0
149
(Power) Demand Block Interval – Used for PQS (P=Real Power
KW, Q=Reactive Power KVAR, and S=Apparent Power KVA)
demand calculations.
Num of Power Dem.
Block Sub-Intrvl.
Subset of Block interval
AV11
n/a
0
150
Number of Power Demand Block Sub-Intervals - Sets the
number of sub-intervals per Demand Block Interval (above).
The method of demand calculation is set as follows:
0 = Sliding Block. Like rolling block, but with a subinterval of
15 seconds; used for Demand Intervals ≤ 15 minutes, or 60
seconds for intervals > 15 minutes
1 = Block. Fixed block with no sub-intervals.
>1 = Rolling Block. The number of sub-intervals per block.
This value must divide evenly into the Block Demand Interval
(above).
For example, if the Demand Block Interval is 15 minutes, valid
Sub-Interval values are: 3, 5, or 15. If the value of 3 is chosen,
then there will be 3 subintervals of 5 minutes each.
ZL0135-0A
Page 38 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL) The H8238 contains up to 8 logical meters, each with 91 data objects, for a total of 728 Data objects for one H8238 if all 8 meters are enabled.
The H8238 operates at 9600 or 19200 baud.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
261/262
kVAR: Total
Total Instantaneous Reactive
Power
AI3
kVAR
1
263/264
KVA: Total
Total Instantaneous Apparent
Power
AI4
kVA
1
265/266
PF: Total
Total Instantaneous Power
Factor
AI5
PF
0.01
267/268
Volts: L-L Avg
Voltage L-L average of active
phases
AI6
Volts
5
269/270
Volts: L-N Avg
Voltage L-N average of active
phases
AI7
Volts
5
271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
273/274
Frequency
Instantaneous Frequency
AI9
Hz
0.01
275/276
kW: Ph A
Instantaneous Real Power
Phase A
AI10
kW
1
277/278
kW: Ph B
Instantaneous Real Power
Phase B
AI11
kW
1
279/280
kW: Ph C
Instantaneous Real Power
Phase C
AI12
kW
1
281/282
PF: Ph A
Instantaneous Power Factor
Phase A
AI13
PF
0.01
283/284
PF: Ph B
Instantaneous Power Factor
Phase B
AI14
PF
0.01
285/286
PF: Ph C
Instantaneous Power Factor
Phase C
AI15
PF
0.01
287/288
Volts: Ph A-B
Instantaneous Voltage Phase A
to Phase B
AI16
Volts
5
289/290
Volts: Ph B-C
Instantaneous Voltage Phase B
to Phase C
AI17
Volts
5
291/292
Volts: Ph A-C
Instantaneous Voltage Phase A
to Phase C
AI18
Volts
5
293/294
Volts: Ph A-N
Instantaneous Voltage Phase A
to Neutral
AI19
Volts
5
295/296
Volts: Ph B-N
Instantaneous Voltage Phase B
to Neutral
AI20
Volts
5
297/298
Volts: Ph C-N
Instantaneous Voltage Phase C
to Neutral
AI21
Volts
5
299/300
Amps: Ph A
Instantaneous Current Phase A
AI22
Amps
5
301/302
Amps: Ph B
Instantaneous Current Phase B
AI23
Amps
5
303/304
ZL0135-0A
Page 39 of 162
Frequency: measured from the phase A voltage input.
Range is 40 to 70 Hz. If voltage is insufficient for an
accurate frequency determination, this register reads as
0xFFFF for integer and 0x7FC00000 for float.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Ph C
Instantaneous Current Phase C
AI24
Amps
5
305/306
Amps: Neutral
Instantaneous Neutral Current
AI25
Amps
0.1
307/308
kW: Average
Average Real Power since last
reset
AI26
kW
1
309/310
kW: Min
Minimum Real Power since last
reset
AI27
kW
1
311/312
kW: Max
Maximum Real Power since
last reset
AI28
kW
1
313/314
Firmware Revision - Reset
System
Firmware Revision - Reset
System
AI29
n/a
0
43
Firmware Revision - Operating
System
Firmware Revision - Operating
System
AI30
n/a
0
44
Serial number MSW
MSW of unsigned-long integer
AI31
n/a
0
45
Serial number LSW
LSW of unsigned-long integer
AI32
n/a
0
46
Error Register
0=no error; 1=NV Ram error;
others rsvd
AI33
n/a
0
47
Device ID
15027=8-meter config;
15027=6-meter
AI34
n/a
0
48
Meter Alarm Status (nonlatching)
bitmap of 8 alarms - bits 9-15
are all 0
AI35
n/a
0
49
Over Voltage Set Counter
Over Voltage Set Counter
AI36
n/a
0
50
Over Voltage Reset Counter
Over Voltage Reset Counter
AI37
n/a
0
51
Under Voltage Set Counter
Under Voltage Set Counter
AI38
n/a
0
52
Under Voltage Reset Counter
Under Voltage Reset Counter
AI39
n/a
0
53
Phase Loss A Set Counter
Phase Loss A Set Counter
AI40
n/a
0
54
Phase Loss A Reset Counter
Phase Loss A Reset Counter
AI41
n/a
0
55
Phase Loss B Set Counter
Phase Loss B Set Counter
AI42
n/a
0
56
Phase Loss B Reset Counter
Phase Loss B Reset Counter
AI43
n/a
0
57
Phase Loss C Set Counter
Phase Loss C Set Counter
AI44
n/a
0
58
Phase Loss C Reset Counter
Phase Loss C Reset Counter
AI45
n/a
0
59
Over Current Set Counter
Over Current Set Counter
AI46
n/a
0
60
Over Current Reset Counter
Over Current Reset Counter
AI47
n/a
0
61
ZL0135-0A
Page 40 of 162
Comments
Only Active in 6-Meter mode (reads 65535 in 8-meter
mode)
Reports internal errors detected by the microcontroller.
The ALIVE LED is steadily lit (not blinking) if any errors are
detected.
Holds the instantaneous state of the meter alarms. The
bits in this register are only set while the alarm condition
exists. These alarms cannot be reset by the user. Only set
the Over Voltage Alarm when its time-delay condition is
satisfied (see AV4).
bit 0 = over current
bit 1 = under current
bit 2 = over kVA
bit 3 = under kVA
bit 4 = over voltage
bit 5 = under voltage
bit 6 = phase loss A
bit 7 = phase loss B
bit 8 = phase loss C
bits 9-15 = 0
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Under Current Set Counter
Under Current Set Counter
AI48
n/a
0
62
Under Current Reset Counter
Under Current Reset Counter
AI49
n/a
0
63
Over kVA Set Counter
Over kVA Set Counter
AI50
n/a
0
64
Over kVA Reset Counter
Over kVA Reset Counter
AI51
n/a
0
65
Under kVA Set Counter
Under kVA Set Counter
AI52
n/a
0
66
Under kVA Reset Counter
Under kVA Reset Counter
AI53
n/a
0
67
Modbus addr as conf by DIP
switches
integer value (1-247) addr of
1st meter
AI54
n/a
0
68
Baud rate as conf by DIP
switches
integer (2400; 4800; 9600;
19200)
AI55
n/a
0
69
Comments
Analog_value Objects (can be written as well as read)
Reset Min/Max/Avg Real Power
Write Zero to Reset Min/Max/
Avg kW
AV1
n/a
0
28
Returns random values if read.
Reset Energy Consumption
Write Zero to Reset kWh
Accumulator
AV2
n/a
0
1
Returns random values if read.
CT Scale
Amp rating of CT used (integer)
AV3
Amps
0
30
Sets the size of the external 5-Amp CTs used. Range is 1 to
5999. E.g. for 10A:5A CTs, set register to 10; for 4000A:5A
CTs, set register to 4000.
Over Voltage (AV6) Alarm
Threshold
Alarm if L-L Voltage>threshold
> 10 sec
AV4
Volts
0
31
Occurs if the average L-L voltage (AI6) is greater than
this threshold for at least 10 seconds. Units are absolute
voltage (using integer multiplier). Range = 0 to 65535;
Default = 65535
Under Voltage (AV6) Alarm
Threshold
Alarm if L-L Voltage<threshold
(ever)
AV5
Volts
0
32
Occurs if the average L-L voltage (AI6) is less than this
threshold at any time. Units are absolute voltage (using
integer multiplier). Range = 0 to 65535; Default = 0
Over Current (AV8) Alarm
Threshold
Alarm if Avg Current>threshold
(ever)
AV6
Amps
0
33
Occurs if the average current (AI8) is greater than this
threshold at any time. Units are absolute current
(usinginteger multiplier). Range = 0 to 65535; Default
= 65535
Under Current (AV8) Alarm
Threshold
Alarm if Avg Current<threshold
(ever)
AV7
Amps
0
34
Occurs if the average current (AI8) is less than this
threshold at any time. Units are absolute current
(usinginteger multiplier). Range = 0 to 65535; Default
=0
Over kVA (AV5) Alarm Threshold
Alarm if kVA>threshold (ever)
AV8
kVA
0
35
Occurs if the total apparent power (AI5) is greater than
this threshold at any time. Units are absolute kVA (using
integer multiplier). Range = 0 to 65535; Default = 65535
Under kVA (AV5) Alarm
Threshold
Alarm if kVA<threshold (ever)
AV9
kVA
0
36
Occurs if the total apparent power (AI5) is less than this
threshold at any time. Units are absolute kVA (using
integer multiplier). Range = 0 to 65535; Default = 0
ZL0135-0A
Page 41 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Meter Alarm Status (Latching)
bitmap of 8 alarms - bits 9-15
are all 0
AV10
n/a
0
37
Holds the state of the meter alarm latches. These alarms
are latching and must be cleared by the user. To reset any
alarm, read the register and then write the register with
the desired alarm bit cleared. Writing a 1 to any bit has
no effect.
bit 0 = over current
bit 1 = under current
bit 2 = over kVA
bit 3 = under kVA
bit 4 = over voltage
bit 5 = under voltage
bit 6 = phase loss A
bit 7 = phase loss B
bit 8 = phase loss C
bits 9-15 = 0
Phase Loss Threshold
Integer % of other phases
AV11
Percent
0
38
Phase Loss Threshold (0 to 100%, default = 65535): these
exist independently for all 3 phases (A, B, C). This register
sets the alarm threshold for all three phases. This setting
is the percent deviation of a phase from the average of
all 3 phases (register 8). The decision logic is constructed
so that normal power-ups do not trigger alarms. A phase
loss alarm will occur only if the following conditions are
met:
1. The average L-L voltage (register 8) is greater than 25V.
2. The L-N voltage on a phase (register 20, 21, or 22) is less
than the percent deviation set by this threshold.
3. This threshold is set between 0 and 100%.
Meter Name: First 2 characters
First 2 ASCII characters
(Default=MT)
AV12
n/a
0
39
Meter Name: Second 2
characters
Second 2 ASCII characters
(Default=Rx)
AV13
n/a
0
40
Board Name: First 2 characters
First 2 ASCII characters
(Default=BR)
AV14
n/a
0
41
Board Name: Second 2
characters
Second 2 ASCII characters
(Default=C1)
AV15
n/a
0
42
AV12 – AV15 is a decimal representation of two ASCII
characters used for the meter name. Allowed characters
are 21h through 7Dh, excluding 5Ch. The high order byte
is the high-order character.
For example:
AV12 Present Value = 19796  4D54 (hex)
M = 4D (hex)
T = 54 (hex)
ZL0135-0A
Page 42 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL), cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Meter Enable Register
bitmap of 8 meters: 0=off;
1=on; 9-15=0
AV16
n/a
0
73
Meter Enable Register: allows the user to enable or disable
selected meters on the board. A disabled meter will not
respond to any Modbus queries. A 1 indicates an enabled
meter; a 0 indicates a disabled meter. This register can
only be written to meter #1. When read from meters 2
through 8, the high bit (bit 15) is always set as a flag that
the register may not be written to that meter. When in
6-meter mode, bit 6 and bit 7 may not be set and will
always read as 0.
bit 0 = Meter #1 (always reads as 1, cannot be reset)
bit 1 = Meter #2
bit 2 = Meter #3
bit 3 = Meter #4
bit 4 = Meter #5
bit 5 = Meter #6
bit 6 = Meter #7
bit 7 = Meter #8
bits 8-14 = 0
bit 15 = 0 if read from Meter #1; 1 if read from Meters
#2-#8
Critical Alarm Register
info only: set 0=critical; 1=not;
9-15=0
AV17
n/a
0
74
Critical Alarm Register: allows the user to indicate which
of the meter’s alarms are critical and non-critical. This
product takes no action on the contents of this register.
It is provided for monitoring systems’ use. A 1 indicates a
critical alarm; a 0 indicates a non-critical alarm.
bit 0 = over current
bit 1 = under current
bit 2 = over kVA
bit 3 = under kVA
bit 4 = over voltage
bit 5 = under voltage
bit 6 = phase loss A
bit 7 = phase loss B
bit 8 = phase loss C
bits 9-15 = 0
Non-Latching Alarm - Over Current
1=Active; 0=Inactive
BI1
74:0
Non-Latching Alarm - Under Current
1=Active; 0=Inactive
BI2
74:1
Non-Latching Alarm - Over kVA
1=Active; 0=Inactive
BI3
74:2
Non-Latching Alarm - Under kVA
1=Active; 0=Inactive
BI4
74:3
Non-Latching Alarm - Over Voltage
1=Active; 0=Inactive
BI5
74:4
Non-Latching Alarm - Under Voltage
1=Active; 0=Inactive
BI6
74:5
Non-Latching Alarm - Phase Loss - A
1=Active; 0=Inactive
BI7
74:6
Non-Latching Alarm - Phase Loss - B
1=Active; 0=Inactive
BI8
74:7
Non-Latching Alarm - Phase Loss - C
1=Active; 0=Inactive
BI9
74:8
Latching Alarm - Over Current
1=Active; 0=Inactive; write 0 to
clear
BV1
37:0
Latching Alarm - Under Current
1=Active; 0=Inactive; write 0 to
clear
BV2
37:1
Binary_Input Objects
Binary_Value Objects
ZL0135-0A
Page 43 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8238 Series Multi-Circuit Meters (H8238, H8238E & H8238EL), cont.
Data Variable
Description
BACnet
Object
Units
Latching Alarm - Over kVA
1=Active; 0=Inactive; write 0 to
clear
BV3
37:2
Latching Alarm - Under kVA
1=Active; 0=Inactive; write 0 to
clear
BV4
37:3
Latching Alarm - Over Voltage
1=Active; 0=Inactive; write 0 to
clear
BV5
37:4
Latching Alarm - Under Voltage
1=Active; 0=Inactive; write 0 to
clear
BV6
37:5
Latching Alarm - Phase Loss - A
1=Active; 0=Inactive; write 0 to
clear
BV7
37:6
Latching Alarm - Phase Loss - B
1=Active; 0=Inactive; write 0 to
clear
BV8
37:7
Latching Alarm - Phase Loss - C
1=Active; 0=Inactive; write 0 to
clear
BV9
37:8
ZL0135-0A
Page 44 of 162
COV_
Increment
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8163 Series Energy Meter with H8163-CB Modbus Communication Board
The H8163 Series has 54 data objects and operates at 9600 or 19200 baud. All date/time values (AI39-47 and AV5-7) for the H8163 are float representations of hexadecimal
data with two values packed into each word, one in the lower byte (LSB) and one in the upper byte (MSB). Convert these values externally.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_input Objects (read-only)
kWh Energy: Total
Accumulated Real Energy
AI1
kWh
0
259/260
kW: Total
Total Instantaneous Real Power
AI2
kW
1
261/262
kVAR: Total
Total Instantaneous Reactive
Power
AI3
kVAR
1
263/264
KVA: Total
Total Instantaneous Apparent
Power
AI4
kVA
1
265/266
PF: Total
Total Instantaneous Power
Factor
AI5
PF
0.01
267/268
Volts: L-L Avg
Voltage L-L average of active
phases
AI6
Volts
5
269/270
Volts: L-N Avg
Voltage L-N average of active
phases
AI7
Volts
5
271/272
Amps: Avg
Current Avg of active phases
AI8
Amps
5
273/274
kW: Ph A
Instantaneous Real Power
Phase A
AI9
kW
1
275/276
kW: Ph B
Instantaneous Real Power
Phase B
AI10
kW
1
277/278
kW: Ph C
Instantaneous Real Power
Phase C
AI11
kW
1
279/280
PF: Ph A
Instantaneous Power Factor
Phase A
AI12
PF
0.01
281/282
PF: Ph B
Instantaneous Power Factor
Phase B
AI13
PF
0.01
283/284
PF: Ph C
Instantaneous Power Factor
Phase C
AI14
PF
0.01
285/286
Volts: Ph A-B
Instantaneous Voltage Phase A
to Phase B
AI15
Volts
5
287/288
Volts: Ph B-C
Instantaneous Voltage Phase B
to Phase C
AI16
Volts
5
289/290
Volts: Ph A-C
Instantaneous Voltage Phase A
to Phase C
AI17
Volts
5
291/292
Volts: Ph A-N
Instantaneous Voltage Phase A
to Neutral
AI18
Volts
5
293/294
Volts: Ph B-N
Instantaneous Voltage Phase B
to Neutral
AI19
Volts
5
295/296
Volts: Ph C-N
Instantaneous Voltage Phase C
to Neutral
AI20
Volts
5
297/298
Amps: Ph A
Instantaneous Current Phase A
AI21
Amps
5
299/300
Amps: Ph B
Instantaneous Current Phase B
AI22
Amps
5
301/302
Amps: Ph C
Instantaneous Current Phase C
Present Real Energy Sub-Interval SubInterval value currently
accumulating
ZL0135-0A
Page 45 of 162
AI23
Amps
5
303/304
AI24
kW
1
305/306
Present Demand Sub-Interval. This is the currently
accumulating Sub-Interval demand, which is constantly
changing.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8163 Series Energy Meter with H8163-CB Modbus Communication Board, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Present Real Energy Demand
(kW)
Most recent kW Demand SubInterval
AI25
kW
1
307/308
Present Demand (kW). This is the present demand, updated
at the end of every Sub-Interval. This value is the average of
the previous N subintervals, where N is the number of sub
intervals (register 37).
Peak Real Energy Demand
Largest value recorded
AI26
kW
1
309/310
The peak demand is the highest demand value (register 26)
that has occurred. This value is also displayed on LCD for MAX
kW when the comms board is present.
Present Reactive Energy SubInterval
SubInterval value currently
accumulating
AI27
KVAR
1
311/312
Present kVAR Sub-Interval. This is the currently accumulating
Sub-Interval KVAR, which is constantly changing.
Present Reactive Energy Demand Most recent Demand SubInterval
AI28
KVAR
1
313/314
Present kVAR. This is the present kVar, which is updated at
the end of every sub-interval. This value is the average of
the previous N sub-intervals, where N is the number of subintervals (register 37).
Peak Reactive Energy Demand
Largest value recorded
AI29
KVAR
1
315/316
Peak kVar. The peak kVar is the highest kVar value (register 28)
that has occurred.
Count of KWh resets
Number of times kWh
accumulator was reset
AI30
n/a
1
31
Count of KWh resets. The number of times the peak demand
(register 27) has been reset. This value rolls over from 65535
to zero.
Count of Peak Demand Resets
Number of times Peak kW
Demand was reset
AI31
n/a
1
32
Count of Peak Demand Resets. The number of times the peak
demand (register 27) has been reset. This value rolls over
from 65535 to zero.
Count of Peak kVAR Resets
Number of times Peak kVAR
Demand was reset
AI32
n/a
1
33
Count of Peak kVar Resets. The number of times the peak kVar
(register 30) has been reset. This value rolls over from 65535
to zero.
Count of Elapsed Sub Intervals
Sub-intervals filled in current
Block
AI33
n/a
1
34
Count of Elapsed Sub Intervals. This counts the number
of subintervals that have elapsed. Because the demand
(register 28) is updated every sub-interval, this register may
be read to determine if an identical value in register 28 is
actually the same demand
# of Readings in Present subinterval
updated every 200 mS
AI34
n/a
5000
35
Number readings in present sub-interval. This value indicates
the number of readings that are represented by the present
subinterval (register 25). This register acts as an unsigned
integer. Values larger than 32767 should not be “trusted”.
See below for explanation of sub-interval reading count
overflow. This register will increment every 200 ms (5 times
per Second).
System ID
15024=Basic, 15025=Enhanced
AI35
n/a
0
38
System ID. This register reads as 15024 for the Basic Meter and
15025 for the Enhanced Model to help identify the meter.
CT Size
Primary Rating, in Amps
AI36
n/a
0
39
CT Size. This register reads as the CT size: 100, 300, etc.
CT Number
Qty of CTs configured
AI37
n/a
0
40
CT Number. The number of CTs that are connected, 1,2, or 3.
Count of Phase Losses
Number of times phase loss has
occurred
AI38
n/a
1
43
Count of Phase Losses. The number of times a phase loss has
occurred on any phase. This value rolls over from 65535 to
zero.
ZL0135-0A
Page 46 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H8163 Series Energy Meter with H8163-CB Modbus Communication Board, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Phase Loss Timestamp, Month/
Day
Hex Month 1-12 (LSB); Day 1-31
(MSB)
AI39
n/a
65535
47
Phase Loss Timestamp, Year/
Hour
Hex Year 0-199 (LSB), Hour 0-23
(MSB)
AI40
n/a
65535
48
Phase Loss Timestamp, Minute/
Second
Hex Minute 0-59 (LSB), Second
0-59 (MSB)
AI41
n/a
65535
49
Last Restart Time., Month/Day
Hex Month 1-12 (LSB); Day 1-31
(MSB)
AI42
n/a
65535
50
Last Restart Time., Year/Hour
Hex Year 0-199 (LSB), Hour 0-23
(MSB)
AI43
n/a
65535
51
Last Restart Time., Minute/
Second
Hex Minute 0-59 (LSB), Second
0-59 (MSB)
AI44
n/a
65535
52
Last kWh Reset Time., Month/
Day
Hex Month 1-12 (LSB); Day 1-31
(MSB)
AI45
n/a
65535
53
Last kWh Reset Time., Year/Hour
Hex Year 0-199 (LSB), Hour 0-23
(MSB)
AI46
n/a
65535
54
Last kWh Reset Time., Minute/
Second
Hex Minute 0-59 (LSB), Second
0-59 (MSB)
AI47
n/a
65535
55
Comments
The Date/Time information in A139-AI47 is encoded as two
8-bit hexadecimal values. To use these values, first convert
the float values read to an integer, then convert to a 16-bit
hexadecimal number, then convert each of the two bytes
of the hexadecimal number to individual integer values.
The first value (Months, Years or Minutes) is in the least
significant byte of the hexadecimal number, and the second
value (Days, Hours or Seconds) is in the most significant byte
the hexadecimal number.
For example:
Last Restart Timestamp:
AI42 Present Value = 6920
AI43 Present Value = 4876
AI44 Present Value = 15145
AI42 – 6920 -> 1B08 (hex)
Day = 1B (hex) -> 27
Month = 08 (hex) -> 8
AI43 – 4876 -> 130C (hex)
Hour = 13 (hex) -> 19 -> 7 PM
Year = 0C (hex) -> 12
AI44 – 15145 -> 3B29 (hex)
Second = 3B (hex) -> 59
Minute = 29 (hex) -> 41
Last Restart Timestamp – August 27th 2012 7:41:59 PM
Analog_value Objects (can be written as well as read)
Sub-Interval Length
Number of Seconds * 5 (4500 =
15 min)
AV1
n/a
0
36
Sub-Interval Length. Sets the length of a sub-interval.
Value is the number of seconds * 5, for example, 4500 is 15
minutes. For sync-to-comms, or sync-to-demand-reset-input
(hardware signal), set this to zero.
# of Sub-Intervals per Demand
Interval
1-6 (1= Block Demand)
AV2
n/a
0
37
Number of Sub-Intervals per Demand Interval. Sets the
number of sub-intervals that make a single demand interval.
Legal values are 1 to 6. For block demand, set this to 1.
Command: write values to reset:
1=Dmd; 2=kW Accum; 4=Pk
KW; 8=Pk kVAR
AV3
n/a
0
41
Command (bit mapped):
bit 0 (mask 1) = begin new demand sub-interval
bit 1 (mask 2) = clear kWh accumulator
bit 2 (mask 4) = reset peak demand
bit 3 (mask 8) = reset peak kVAR
bits 4-15 = write as zeros to avoid activating any additional
commands that may be added in future revisions.
Phase Loss; Latching Register
(bitmap):
bit0=ph-A; bit1=ph-B;
bit2=ph-C; 3-15 nu
AV4
n/a
0
42
Phase Loss, Latching Register (bit mapped):
bit 0 = phase A (unpredictable results, phase A)
bit 1 = phase B
bit 2 = phase C
bits 3 to 15 = write as zeros. User clears this latching register.
Present Date/Time Month/Day
Hex Month 1-12 (LSB); Day 1-31
(MSB)
AV5
n/a
65535
44
Date/Time Month 1-12(LSB) Day 1-31 (MSB)
Hexadecimal values.
Present Date/Time Year/Hour
Hex Year 0-199 (LSB); Hour 0-23
(MSB)
AV6
n/a
65535
45
Date/Time Year 0-99(LSB) Hour 0-23 (MSB)
Hexadecimal values.
Present Date/Time Minute/
Second
Hex Minute 0-59 (LSB); Second
0-59 (MSB)
AV7
n/a
65535
46
Date/Time Minutes 0-59 (LSB) Second 0-59 (MSB)
Hexadecimal values.
ZL0135-0A
Page 47 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters
The E3x family consists of models with different CT styles (solid-core or split-core), different functionality levels (A, B, C or E) and have shipped with different firmware versions
over time that affect which data points are supported. When the E8951 discovers any of these products, it reads the firmware version and functionality level supported and
loads the appropriate set of BACnet objects for that specific unit. This table shows the BACnet objects for E3xA/E models. The BACnet objects for E3xB/C models. are described
in the next section.
The E3xAxxxx and E3xExxx meters have 737-1793 data objects per Modbus address (1793 for FW V1.023 and above, 783 for V1.016 - V1.022, and 737 for versions below 1.016)
and operate at 9600, 19200 or 38400 baud. These meters monitor current, power, demand and energy on 42 branch circuits and four main circuits (up to three phases, plus
Neutral) for each Modbus address. The E30A/E models with 42 channels or fewer have one Modbus address and support only 42 branch channels (plus main channels). The
three columns under E3xA/E below indicate which points apply to each firmware version.
The E30A/E models with more than 42 channels and all E31A/E models have two Modbus addresses and support up to 84 branch channels and two sets of four main channels.
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
AV4-AV45 are NOT WRITABLE on E30A/E solid-core models because CT size is fixed (at 100A). Other values written will revert to 100A the next time the meter is scanned. They
are writable on E31A/E split-core models.
Frequency: (derived from Phase A)
Frequency (derived from Phase A)
AI1
x
x
x
Hertz
0.01
600/601
VOLTS L-N: 3ph Ave
Voltage L-L - average of active phases
AI2
x
x
x
Volts
5
602/603
VOLTS L-L: 3ph Ave
Voltage L-N - average of active phases
AI3
x
x
x
Volts
5
604/605
VOLTS A-N
Instantaneous Voltage Ph-A to Neutral
AI4
x
x
x
Volts
5
606/607
VOLTS B-N
Instantaneous Voltage Ph-B to Neutral
AI5
x
x
x
Volts
5
608/609
VOLTS C-N
Instantaneous Voltage Ph-C to Neutral
AI6
x
x
x
Volts
5
610/611
VOLTS A-B
Instantaneous Voltage Phase A to B
AI7
x
x
x
Volts
5
612/613
VOLTS B-C
Instantaneous Voltage Phase B to C
AI8
x
x
x
Volts
5
614/615
VOLTS A-C
Instantaneous Voltage Phase A to C
AI9
x
x
x
Volts
5
616/617
kWh Energy: 3ph Total
Real Energy - total of active phases
AI10
x
x
x
kWh
0
618/619
kW: 3ph Total
Inst Real Power- total of active phases
AI11
x
x
x
kW
1
620/621
Power Factor: 3ph Total
Inst Power Factor - average of phases
AI12
x
x
x
PF
0.01
622/623
Amps: 3ph Average (phases 1,2,3)
Inst Current- average of active phases
AI13
x
x
x
Amperes
5
624/625
kW: Phase 1
Instantaneous Real Power - Phase 1
AI14
x
x
x
kW
1
626/627
kW: Phase 2
Instantaneous Real Power - Phase 2
AI15
x
x
x
kW
1
628/629
kW: Phase 3
Instantaneous Real Power - Phase 3
AI16
x
x
x
kW
1
630/631
Power Factor: Phase 1
Instantaneous Power Factor - Phase A
AI17
x
x
x
PF
0.01
632/633
Power Factor: Phase 2
Instantaneous Power Factor - Phase B
AI18
x
x
x
PF
0.01
634/635
Power Factor: Phase 3
Instantaneous Power Factor - Phase C
AI19
x
x
x
PF
0.01
636/637
Amps: Phase 1
Instantaneous Current - Phase 1
AI20
x
x
x
Amperes
5
638/639
Amps: Phase 2
Instantaneous Current - Phase 2
AI21
x
x
x
Amperes
5
640/641
Amps: Phase 3
Instantaneous Current - Phase 3
AI22
x
x
x
Amperes
5
642/643
Amps: Phase 4 (Neutral)
Instantaneous Neutral Current
AI23
x
x
x
Amperes
5
644/645
Amps Present Demand: Phase 1
Present Current Demand- Phase 1
AI24
x
x
x
Amperes
5
646/647
Amps Present Demand: Phase 2
Present Current Demand - Phase 2
AI25
x
x
x
Amperes
5
648/649
Data Variable
Description
Units
Modbus
Address
Comments
Analog_Input Objects
ZL0135-0A
Page 48 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Amps Present Demand: Phase 3
Present Current Demand - Phase 3
AI26
x
x
x
Amperes
5
650/651
Amps Present Demand: (Neutral)
Present Current Demand - Neutral
AI27
x
x
x
Amperes
5
652/653
Amps Max Demand: Phase 1
Max Current Demand - Phase 1
AI28
x
x
x
Amperes
5
654/655
Amps Max Demand: Phase 2
Max Current Demand - Phase 2
AI29
x
x
x
Amperes
5
656/657
Amps Max Demand: Phase 3
Max Current Demand - Phase 3
AI30
x
x
x
Amperes
5
658/659
Amps Max Demand: (Neutral)
Max Current Demand - Neutral
AI31
x
x
x
Amperes
5
660/661
kW Present Demand: 3ph Total
Real Power Present Demand - 3ph Total
AI32
x
x
x
kW
1
662/663
kW Max Demand: 3ph Total
Real Power Max Demand - 3ph Total
AI33
x
x
x
kW
1
664/665
Max Amps: Phase 1
Max Instantaneous Current - Phase 1
AI34
x
x
x
Amperes
5
666/667
Max Amps: Phase 2
Max Instantaneous Current - Phase 2
AI35
x
x
x
Amperes
5
668/669
Max Amps: Phase 3
Max Instantaneous Current - Phase 3
AI36
x
x
x
Amperes
5
670/671
Max Amps: (Neutral)
Max Instantaneous Neutral Current
AI37
x
x
x
Amperes
5
672/673
kW: 3ph Max
Max Instantaneous Real Power- 3ph Total AI38
x
x
x
kW
1
674/675
Device Health
Bit Map of Device Health Indicators
AI39
x
x
x
No-Units
1
532
Reserved for future use
Reserved for future use
AI40
x
x
x
No-Units
1
533
Reserved for future use
Reserved for future use
AI41
x
x
x
No-Units
1
534
Reserved for future use
Reserved for future use
AI42
x
x
x
No-Units
1
535
Reserved for future use
Reserved for future use
AI43
x
x
x
No-Units
1
536
Reserved for future use
Reserved for future use
AI44
x
x
x
No-Units
1
537
Reserved for future use
Reserved for future use
AI45
x
x
x
No-Units
1
538
Product ID
bit Map of Model configuration
AI46
x
x
x
No-Units
1
539
kVA: 3ph Total
Instantaneous Apparent Power- 3ph
Total
AI47
x
x
x
kVA
1
676/677
Data Variable
ZL0135-0A
Description
Page 49 of 162
Modbus
Address
Comments
“Bit 0: Reserved
Bit 1: Frequency Out of Range
or insufficient voltage on Phase
A to determine frequency range.
*Frequency Range is 40-70 Hz.
Bit 2: Phase A Voltage Clipping
Bit 3: Phase B Voltage Clipping
Bit 4: Phase C Voltage Clipping
Bit 5: Current Clipping on at least 1
channel (AUX & Circuit)
Bit 6-7: Reserved
Bit 8: Strip Connection Error
Bit 9-12: Reserved
Bit 13: Current Model, Model C
Bit 14: Power Model, Model B
Bit 15: Branch Power, Model A”
“Bit 0: Default Solid-Core
Bit 1: Default Split-Core
Bit 3-9: Reserved
Bit 10: Reserved
Bit 11: Reserved
Bit 12: Custom V-Phase Capable
Bit 13: Reserved (Model C)
Bit 14: Reserved (Model B)
Bit 15: Reserved (Model A)”
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
Description
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kVA: Phase 1
Instantaneous Apparent Power - Phase 1
AI48
x
x
x
kVA
1
678/679
kVA: Phase 2
Instantaneous Apparent Power - Phase 2
AI49
x
x
x
kVA
1
680/681
kVA: Phase 3
Instantaneous Apparent Power - Phase 3
AI50
x
x
x
kVA
1
682/683
Serial Number MSW
Serial Number MSW
AI51
x
x
x
No-Units
1
1
Upper 16-bits of a 32-bit Hex Value
Serial Number LSW
Serial Number LSW
AI52
x
x
x
No-Units
1
2
Lower 16-bits of a 32-bit Hex Value
Firmware Revision RS
Firmware Revision RS
AI53
x
x
x
No-Units
1
3
Firmware Revision OS
Firmware Revision OS
AI54
x
x
x
No-Units
1
4
Device ID:
15170=C, 15171=B, 15172=A
AI55
x
x
x
No-Units
1
5
“15170 = Model C, current only on
all channels, no voltage
15171 = Model B, current only on
branch channels, power on AUX
channels plus voltage
15172 = Model A, current and
power on all channels plus
voltage”
Global Latching Alarm Status
(HHL,HL,LL,LLL,ON,Rsv,Rsv,Rsv,HVL,LVL)
AI56
x
x
x
No-Units
1
224
“Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state
declared (1=OFF; ON state must
have been achieved prior)
Bit 5-7: Reserved for future use
(reads 0)
Bit 8: High Voltage Latching Alarm
Bit 9: Low Voltage Latching Alarm
Bit 10-15: Reserved for future use
(reads 0) “
Global Non-Latching Alarm Status
(HL,LL,Rsv,Rsv,Rsv,Rsv,Rsv,Rsv,HVL,LVL)
AI57
x
x
x
No-Units
1
225
“Bit 0: High Non-Latching Alarm
Bit 1: Low Non-Latching Alarm
Bit 2-7: Reserved for future use
(reads 0)
Bit 8: High Voltage Non-Latching
Alarm
Bit 9: Low Voltage Non-Latching
Alarm
Bit 10-15: Reserved for future use
(reads 0)”
Global Most-Recent Latching Alarm Ch # of Most-Recent Channel (0=none)
AI58
x
x
x
No-Units
1
226
0-46, 0=none
Global Most-Recent Non-Latch Alarm
Ch
# of Most-Recent Channel (0=none)
AI59
x
x
x
No-Units
1
227
0-46, 0=none
Total number of Latch ch in alarm
# alarm chan (non-latching alarms)
AI60
x
x
x
No-Units
1
228
Total number of non-Latch ch in alarm
# alarm chan (based on latching alarms)
AI61
x
x
x
No-Units
1
229
Error Bitmap1 (placeholder - TBD)
Error Bitmap1 (placeholder - bits TBD)
AI62
x
x
x
No-Units
1
230
Error Bitmap2 (placeholder - TBD)
Error Bitmap2 (placeholder - bits TBD)
AI63
x
x
x
No-Units
1
231
Error Bitmap3 (placeholder - TBD)
Error Bitmap3 (placeholder - bits TBD)
AI64
x
x
x
No-Units
1
232
Error Bitmap4 (placeholder - TBD)
Error Bitmap4 (placeholder - bits TBD)
AI65
x
x
x
No-Units
1
233
Data Variable
ZL0135-0A
Page 50 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Error Bitmap5 (placeholder - TBD)
Error Bitmap5 (placeholder - bits TBD)
AI66
x
x
x
No-Units
1
234
Error Bitmap6 (placeholder - TBD)
Error Bitmap6 (placeholder - bits TBD)
AI67
x
x
x
No-Units
1
235
kWh: Channel 1
Real Energy - Channel 1
AI68
x
x
x
kWh
0
2000/2001
kWh: Channel 2
Real Energy - Channel 2
AI69
x
x
x
kWh
0
2002/2003
kWh: Channel 3
Real Energy - Channel 3
AI70
x
x
x
kWh
0
2004/2005
kWh: Channel 4
Real Energy - Channel 4
AI71
x
x
x
kWh
0
2006/2007
kWh: Channel 5
Real Energy - Channel 5
AI72
x
x
x
kWh
0
2008/2009
kWh: Channel 6
Real Energy - Channel 6
AI73
x
x
x
kWh
0
2010/2011
kWh: Channel 7
Real Energy - Channel 7
AI74
x
x
x
kWh
0
2012/2013
kWh: Channel 8
Real Energy - Channel 8
AI75
x
x
x
kWh
0
2014/2015
kWh: Channel 9
Real Energy - Channel 9
AI76
x
x
x
kWh
0
2016/2017
kWh: Channel 10
Real Energy - Channel 10
AI77
x
x
x
kWh
0
2018/2019
kWh: Channel 11
Real Energy - Channel 11
AI78
x
x
x
kWh
0
2020/2021
kWh: Channel 12
Real Energy - Channel 12
AI79
x
x
x
kWh
0
2022/2023
kWh: Channel 13
Real Energy - Channel 13
AI80
x
x
x
kWh
0
2024/2025
kWh: Channel 14
Real Energy - Channel 14
AI81
x
x
x
kWh
0
2026/2027
kWh: Channel 15
Real Energy - Channel 15
AI82
x
x
x
kWh
0
2028/2029
kWh: Channel 16
Real Energy - Channel 16
AI83
x
x
x
kWh
0
2030/2031
kWh: Channel 17
Real Energy - Channel 17
AI84
x
x
x
kWh
0
2032/2033
kWh: Channel 18
Real Energy - Channel 18
AI85
x
x
x
kWh
0
2034/2035
kWh: Channel 19
Real Energy - Channel 19
AI86
x
x
x
kWh
0
2036/2037
kWh: Channel 20
Real Energy - Channel 20
AI87
x
x
x
kWh
0
2038/2039
kWh: Channel 21
Real Energy - Channel 21
AI88
x
x
x
kWh
0
2040/2041
kWh: Channel 22
Real Energy - Channel 22
AI89
x
x
x
kWh
0
2042/2043
kWh: Channel 23
Real Energy - Channel 23
AI90
x
x
x
kWh
0
2044/2045
kWh: Channel 24
Real Energy - Channel 24
AI91
x
x
x
kWh
0
2046/2047
kWh: Channel 25
Real Energy - Channel 25
AI92
x
x
x
kWh
0
2048/2049
kWh: Channel 26
Real Energy - Channel 26
AI93
x
x
x
kWh
0
2050/2051
kWh: Channel 27
Real Energy - Channel 27
AI94
x
x
x
kWh
0
2052/2053
kWh: Channel 28
Real Energy - Channel 28
AI95
x
x
x
kWh
0
2054/2055
kWh: Channel 29
Real Energy - Channel 29
AI96
x
x
x
kWh
0
2056/2057
kWh: Channel 30
Real Energy - Channel 30
AI97
x
x
x
kWh
0
2058/2059
kWh: Channel 31
Real Energy - Channel 31
AI98
x
x
x
kWh
0
2060/2061
kWh: Channel 32
Real Energy - Channel 32
AI99
x
x
x
kWh
0
2062/2063
kWh: Channel 33
Real Energy - Channel 33
AI100
x
x
x
kWh
0
2064/2065
kWh: Channel 34
Real Energy - Channel 34
AI101
x
x
x
kWh
0
2066/2067
kWh: Channel 35
Real Energy - Channel 35
AI102
x
x
x
kWh
0
2068/2069
Data Variable
ZL0135-0A
Description
Page 51 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kWh: Channel 36
Real Energy - Channel 36
AI103
x
x
x
kWh
0
2070/2071
kWh: Channel 37
Real Energy - Channel 37
AI104
x
x
x
kWh
0
2072/2073
kWh: Channel 38
Real Energy - Channel 38
AI105
x
x
x
kWh
0
2074/2075
kWh: Channel 39
Real Energy - Channel 39
AI106
x
x
x
kWh
0
2076/2077
kWh: Channel 40
Real Energy - Channel 40
AI107
x
x
x
kWh
0
2078/2079
kWh: Channel 41
Real Energy - Channel 41
AI108
x
x
x
kWh
0
2080/2081
kWh: Channel 42
Real Energy - Channel 42
AI109
x
x
x
kWh
0
2082/2083
kW: Channel 1
Instantaneous Real Power - Channel 1
AI110
x
x
x
kW
1
2084/2085
kW: Channel 2
Instantaneous Real Power - Channel 2
AI111
x
x
x
kW
1
2086/2087
kW: Channel 3
Instantaneous Real Power - Channel 3
AI112
x
x
x
kW
1
2088/2089
kW: Channel 4
Instantaneous Real Power - Channel 4
AI113
x
x
x
kW
1
2090/2091
kW: Channel 5
Instantaneous Real Power - Channel 5
AI114
x
x
x
kW
1
2092/2093
kW: Channel 6
Instantaneous Real Power - Channel 6
AI115
x
x
x
kW
1
2094/2095
kW: Channel 7
Instantaneous Real Power - Channel 7
AI116
x
x
x
kW
1
2096/2097
kW: Channel 8
Instantaneous Real Power - Channel 8
AI117
x
x
x
kW
1
2098/2099
kW: Channel 9
Instantaneous Real Power - Channel 9
AI118
x
x
x
kW
1
2100/2101
kW: Channel 10
Instantaneous Real Power - Channel 10
AI119
x
x
x
kW
1
2102/2103
kW: Channel 11
Instantaneous Real Power - Channel 11
AI120
x
x
x
kW
1
2104/2105
kW: Channel 12
Instantaneous Real Power - Channel 12
AI121
x
x
x
kW
1
2106/2107
kW: Channel 13
Instantaneous Real Power - Channel 13
AI122
x
x
x
kW
1
2108/2109
kW: Channel 14
Instantaneous Real Power - Channel 14
AI123
x
x
x
kW
1
2110/2111
kW: Channel 15
Instantaneous Real Power - Channel 15
AI124
x
x
x
kW
1
2112/2113
kW: Channel 16
Instantaneous Real Power - Channel 16
AI125
x
x
x
kW
1
2114/2115
kW: Channel 17
Instantaneous Real Power - Channel 17
AI126
x
x
x
kW
1
2116/2117
kW: Channel 18
Instantaneous Real Power - Channel 18
AI127
x
x
x
kW
1
2118/2119
kW: Channel 19
Instantaneous Real Power - Channel 19
AI128
x
x
x
kW
1
2120/2121
kW: Channel 20
Instantaneous Real Power - Channel 20
AI129
x
x
x
kW
1
2122/2123
kW: Channel 21
Instantaneous Real Power - Channel 21
AI130
x
x
x
kW
1
2124/2125
kW: Channel 22
Instantaneous Real Power - Channel 22
AI131
x
x
x
kW
1
2126/2127
kW: Channel 23
Instantaneous Real Power - Channel 23
AI132
x
x
x
kW
1
2128/2129
kW: Channel 24
Instantaneous Real Power - Channel 24
AI133
x
x
x
kW
1
2130/2131
kW: Channel 25
Instantaneous Real Power - Channel 25
AI134
x
x
x
kW
1
2132/2133
kW: Channel 26
Instantaneous Real Power - Channel 26
AI135
x
x
x
kW
1
2134/2135
kW: Channel 27
Instantaneous Real Power - Channel 27
AI136
x
x
x
kW
1
2136/2137
kW: Channel 28
Instantaneous Real Power - Channel 28
AI137
x
x
x
kW
1
2138/2139
kW: Channel 29
Instantaneous Real Power - Channel 29
AI138
x
x
x
kW
1
2140/2141
kW: Channel 30
Instantaneous Real Power - Channel 30
AI139
x
x
x
kW
1
2142/2143
Data Variable
ZL0135-0A
Description
Page 52 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kW: Channel 31
Instantaneous Real Power - Channel 31
AI140
x
x
x
kW
1
2144/2145
kW: Channel 32
Instantaneous Real Power - Channel 32
AI141
x
x
x
kW
1
2146/2147
kW: Channel 33
Instantaneous Real Power - Channel 33
AI142
x
x
x
kW
1
2148/2149
kW: Channel 34
Instantaneous Real Power - Channel 34
AI143
x
x
x
kW
1
2150/2151
kW: Channel 35
Instantaneous Real Power - Channel 35
AI144
x
x
x
kW
1
2152/2153
kW: Channel 36
Instantaneous Real Power - Channel 36
AI145
x
x
x
kW
1
2154/2155
kW: Channel 37
Instantaneous Real Power - Channel 37
AI146
x
x
x
kW
1
2156/2157
kW: Channel 38
Instantaneous Real Power - Channel 38
AI147
x
x
x
kW
1
2158/2159
kW: Channel 39
Instantaneous Real Power - Channel 39
AI148
x
x
x
kW
1
2160/2161
kW: Channel 40
Instantaneous Real Power - Channel 40
AI149
x
x
x
kW
1
2162/2163
kW: Channel 41
Instantaneous Real Power - Channel 41
AI150
x
x
x
kW
1
2164/2165
kW: Channel 42
Instantaneous Real Power - Channel 42
AI151
x
x
x
kW
1
2166/2167
Power Factor: Channel 1
Instantaneous Power Factor - Channel 1
AI152
x
x
x
PF
0.01
2168/2169
Power Factor: Channel 2
Instantaneous Power Factor - Channel 2
AI153
x
x
x
PF
0.01
2170/2171
Power Factor: Channel 3
Instantaneous Power Factor - Channel 3
AI154
x
x
x
PF
0.01
2172/2173
Power Factor: Channel 4
Instantaneous Power Factor - Channel 4
AI155
x
x
x
PF
0.01
2174/2175
Power Factor: Channel 5
Instantaneous Power Factor - Channel 5
AI156
x
x
x
PF
0.01
2176/2177
Power Factor: Channel 6
Instantaneous Power Factor - Channel 6
AI157
x
x
x
PF
0.01
2178/2179
Power Factor: Channel 7
Instantaneous Power Factor - Channel 7
AI158
x
x
x
PF
0.01
2180/2181
Power Factor: Channel 8
Instantaneous Power Factor - Channel 8
AI159
x
x
x
PF
0.01
2182/2183
Power Factor: Channel 9
Instantaneous Power Factor - Channel 9
AI160
x
x
x
PF
0.01
2184/2185
Power Factor: Channel 10
Instantaneous Power Factor - Channel 10
AI161
x
x
x
PF
0.01
2186/2187
Power Factor: Channel 11
Instantaneous Power Factor - Channel 11
AI162
x
x
x
PF
0.01
2188/2189
Power Factor: Channel 12
Instantaneous Power Factor - Channel 12
AI163
x
x
x
PF
0.01
2190/2191
Power Factor: Channel 13
Instantaneous Power Factor - Channel 13
AI164
x
x
x
PF
0.01
2192/2193
Power Factor: Channel 14
Instantaneous Power Factor - Channel 14
AI165
x
x
x
PF
0.01
2194/2195
Power Factor: Channel 15
Instantaneous Power Factor - Channel 15
AI166
x
x
x
PF
0.01
2196/2197
Power Factor: Channel 16
Instantaneous Power Factor - Channel 16
AI167
x
x
x
PF
0.01
2198/2199
Power Factor: Channel 17
Instantaneous Power Factor - Channel 17
AI168
x
x
x
PF
0.01
2200/2201
Power Factor: Channel 18
Instantaneous Power Factor - Channel 18
AI169
x
x
x
PF
0.01
2202/2203
Power Factor: Channel 19
Instantaneous Power Factor - Channel 19
AI170
x
x
x
PF
0.01
2204/2205
Power Factor: Channel 20
Instantaneous Power Factor - Channel 20
AI171
x
x
x
PF
0.01
2206/2207
Power Factor: Channel 21
Instantaneous Power Factor - Channel 21
AI172
x
x
x
PF
0.01
2208/2209
Power Factor: Channel 22
Instantaneous Power Factor - Channel 22
AI173
x
x
x
PF
0.01
2210/2211
Power Factor: Channel 23
Instantaneous Power Factor - Channel 23
AI174
x
x
x
PF
0.01
2212/2213
Power Factor: Channel 24
Instantaneous Power Factor - Channel 24
AI175
x
x
x
PF
0.01
2214/2215
Power Factor: Channel 25
Instantaneous Power Factor - Channel 25
AI176
x
x
x
PF
0.01
2216/2217
Data Variable
ZL0135-0A
Description
Page 53 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Power Factor: Channel 26
Instantaneous Power Factor - Channel 26
AI177
x
x
x
PF
0.01
2218/2219
Power Factor: Channel 27
Instantaneous Power Factor - Channel 27
AI178
x
x
x
PF
0.01
2220/2221
Power Factor: Channel 28
Instantaneous Power Factor - Channel 28
AI179
x
x
x
PF
0.01
2222/2223
Power Factor: Channel 29
Instantaneous Power Factor - Channel 29
AI180
x
x
x
PF
0.01
2224/2225
Power Factor: Channel 30
Instantaneous Power Factor - Channel 30
AI181
x
x
x
PF
0.01
2226/2227
Power Factor: Channel 31
Instantaneous Power Factor - Channel 31
AI182
x
x
x
PF
0.01
2228/2229
Power Factor: Channel 32
Instantaneous Power Factor - Channel 32
AI183
x
x
x
PF
0.01
2230/2231
Power Factor: Channel 33
Instantaneous Power Factor - Channel 33
AI184
x
x
x
PF
0.01
2232/2233
Power Factor: Channel 34
Instantaneous Power Factor - Channel 34
AI185
x
x
x
PF
0.01
2234/2235
Power Factor: Channel 35
Instantaneous Power Factor - Channel 35
AI186
x
x
x
PF
0.01
2236/2237
Power Factor: Channel 36
Instantaneous Power Factor - Channel 36
AI187
x
x
x
PF
0.01
2238/2239
Power Factor: Channel 37
Instantaneous Power Factor - Channel 37
AI188
x
x
x
PF
0.01
2240/2241
Power Factor: Channel 38
Instantaneous Power Factor - Channel 38
AI189
x
x
x
PF
0.01
2242/2243
Power Factor: Channel 39
Instantaneous Power Factor - Channel 39
AI190
x
x
x
PF
0.01
2244/2245
Power Factor: Channel 40
Instantaneous Power Factor - Channel 40
AI191
x
x
x
PF
0.01
2246/2247
Power Factor: Channel 41
Instantaneous Power Factor - Channel 41
AI192
x
x
x
PF
0.01
2248/2249
Power Factor: Channel 42
Instantaneous Power Factor - Channel 42
AI193
x
x
x
PF
0.01
2250/2251
Amps: Channel 1
Instantaneous Current - Channel 1
AI194
x
x
x
Amperes
5
2252/2253
Amps: Channel 2
Instantaneous Current - Channel 2
AI195
x
x
x
Amperes
5
2254/2255
Amps: Channel 3
Instantaneous Current - Channel 3
AI196
x
x
x
Amperes
5
2256/2257
Amps: Channel 4
Instantaneous Current - Channel 4
AI197
x
x
x
Amperes
5
2258/2259
Amps: Channel 5
Instantaneous Current - Channel 5
AI198
x
x
x
Amperes
5
2260/2261
Amps: Channel 6
Instantaneous Current - Channel 6
AI199
x
x
x
Amperes
5
2262/2263
Amps: Channel 7
Instantaneous Current - Channel 7
AI200
x
x
x
Amperes
5
2264/2265
Amps: Channel 8
Instantaneous Current - Channel 8
AI201
x
x
x
Amperes
5
2266/2267
Amps: Channel 9
Instantaneous Current - Channel 9
AI202
x
x
x
Amperes
5
2268/2269
Amps: Channel 10
Instantaneous Current - Channel 10
AI203
x
x
x
Amperes
5
2270/2271
Amps: Channel 11
Instantaneous Current - Channel 11
AI204
x
x
x
Amperes
5
2272/2273
Amps: Channel 12
Instantaneous Current - Channel 12
AI205
x
x
x
Amperes
5
2274/2275
Amps: Channel 13
Instantaneous Current - Channel 13
AI206
x
x
x
Amperes
5
2276/2277
Amps: Channel 14
Instantaneous Current - Channel 14
AI207
x
x
x
Amperes
5
2278/2279
Amps: Channel 15
Instantaneous Current - Channel 15
AI208
x
x
x
Amperes
5
2280/2281
Amps: Channel 16
Instantaneous Current - Channel 16
AI209
x
x
x
Amperes
5
2282/2283
Amps: Channel 17
Instantaneous Current - Channel 17
AI210
x
x
x
Amperes
5
2284/2285
Amps: Channel 18
Instantaneous Current - Channel 18
AI211
x
x
x
Amperes
5
2286/2287
Amps: Channel 19
Instantaneous Current - Channel 19
AI212
x
x
x
Amperes
5
2288/2289
Amps: Channel 20
Instantaneous Current - Channel 20
AI213
x
x
x
Amperes
5
2290/2291
Data Variable
ZL0135-0A
Description
Page 54 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Amps: Channel 21
Instantaneous Current - Channel 21
AI214
x
x
x
Amperes
5
2292/2293
Amps: Channel 22
Instantaneous Current - Channel 22
AI215
x
x
x
Amperes
5
2294/2295
Amps: Channel 23
Instantaneous Current - Channel 23
AI216
x
x
x
Amperes
5
2296/2297
Amps: Channel 24
Instantaneous Current - Channel 24
AI217
x
x
x
Amperes
5
2298/2299
Amps: Channel 25
Instantaneous Current - Channel 25
AI218
x
x
x
Amperes
5
2300/2301
Amps: Channel 26
Instantaneous Current - Channel 26
AI219
x
x
x
Amperes
5
2302/2303
Amps: Channel 27
Instantaneous Current - Channel 27
AI220
x
x
x
Amperes
5
2304/2305
Amps: Channel 28
Instantaneous Current - Channel 28
AI221
x
x
x
Amperes
5
2306/2307
Amps: Channel 29
Instantaneous Current - Channel 29
AI222
x
x
x
Amperes
5
2308/2309
Amps: Channel 30
Instantaneous Current - Channel 30
AI223
x
x
x
Amperes
5
2310/2311
Amps: Channel 31
Instantaneous Current - Channel 31
AI224
x
x
x
Amperes
5
2312/2313
Amps: Channel 32
Instantaneous Current - Channel 32
AI225
x
x
x
Amperes
5
2314/2315
Amps: Channel 33
Instantaneous Current - Channel 33
AI226
x
x
x
Amperes
5
2316/2317
Amps: Channel 34
Instantaneous Current - Channel 34
AI227
x
x
x
Amperes
5
2318/2319
Amps: Channel 35
Instantaneous Current - Channel 35
AI228
x
x
x
Amperes
5
2320/2321
Amps: Channel 36
Instantaneous Current - Channel 36
AI229
x
x
x
Amperes
5
2322/2323
Amps: Channel 37
Instantaneous Current - Channel 37
AI230
x
x
x
Amperes
5
2324/2325
Amps: Channel 38
Instantaneous Current - Channel 38
AI231
x
x
x
Amperes
5
2326/2327
Amps: Channel 39
Instantaneous Current - Channel 39
AI232
x
x
x
Amperes
5
2328/2329
Amps: Channel 40
Instantaneous Current - Channel 40
AI233
x
x
x
Amperes
5
2330/2331
Amps: Channel 41
Instantaneous Current - Channel 41
AI234
x
x
x
Amperes
5
2332/2333
Amps: Channel 42
Instantaneous Current - Channel 42
AI235
x
x
x
Amperes
5
2334/2335
kW Present Demand: Channel 1
Present Real Power Demand - Channel 1
AI236
x
x
x
kW
1
2336/2337
kW Present Demand: Channel 2
Present Real Power Demand - Channel 2
AI237
x
x
x
kW
1
2338/2339
kW Present Demand: Channel 3
Present Real Power Demand - Channel 3
AI238
x
x
x
kW
1
2340/2341
kW Present Demand: Channel 4
Present Real Power Demand - Channel 4
AI239
x
x
x
kW
1
2342/2343
kW Present Demand: Channel 5
Present Real Power Demand - Channel 5
AI240
x
x
x
kW
1
2344/2345
kW Present Demand: Channel 6
Present Real Power Demand - Channel 6
AI241
x
x
x
kW
1
2346/2347
kW Present Demand: Channel 7
Present Real Power Demand - Channel 7
AI242
x
x
x
kW
1
2348/2349
kW Present Demand: Channel 8
Present Real Power Demand - Channel 8
AI243
x
x
x
kW
1
2350/2351
kW Present Demand: Channel 9
Present Real Power Demand - Channel 9
AI244
x
x
x
kW
1
2352/2353
kW Present Demand: Channel 10
Present Real Power Demand - Channel 10 AI245
x
x
x
kW
1
2354/2355
kW Present Demand: Channel 11
Present Real Power Demand - Channel 11 AI246
x
x
x
kW
1
2356/2357
kW Present Demand: Channel 12
Present Real Power Demand - Channel 12 AI247
x
x
x
kW
1
2358/2359
kW Present Demand: Channel 13
Present Real Power Demand - Channel 13 AI248
x
x
x
kW
1
2360/2361
kW Present Demand: Channel 14
Present Real Power Demand - Channel 14 AI249
x
x
x
kW
1
2362/2363
Data Variable
ZL0135-0A
Description
Page 55 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
FW> = V1.203
1.016-1.022
FW < V1.016
BACnet Object
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kW Present Demand: Channel 15
Present Real Power Demand - Channel 15 AI250
x
x
x
kW
1
2364/2365
kW Present Demand: Channel 16
Present Real Power Demand - Channel 16 AI251
x
x
x
kW
1
2366/2367
kW Present Demand: Channel 17
Present Real Power Demand - Channel 17 AI252
x
x
x
kW
1
2368/2369
kW Present Demand: Channel 18
Present Real Power Demand - Channel 18 AI253
x
x
x
kW
1
2370/2371
kW Present Demand: Channel 19
Present Real Power Demand - Channel 19 AI254
x
x
x
kW
1
2372/2373
kW Present Demand: Channel 20
Present Real Power Demand - Channel 20 AI255
x
x
x
kW
1
2374/2375
kW Present Demand: Channel 21
Present Real Power Demand - Channel 21 AI256
x
x
x
kW
1
2376/2377
kW Present Demand: Channel 22
Present Real Power Demand - Channel 22 AI257
x
x
x
kW
1
2378/2379
kW Present Demand: Channel 23
Present Real Power Demand - Channel 23 AI258
x
x
x
kW
1
2380/2381
kW Present Demand: Channel 24
Present Real Power Demand - Channel 24 AI259
x
x
x
kW
1
2382/2383
kW Present Demand: Channel 25
Present Real Power Demand - Channel 25 AI260
x
x
x
kW
1
2384/2385
kW Present Demand: Channel 26
Present Real Power Demand - Channel 26 AI261
x
x
x
kW
1
2386/2387
kW Present Demand: Channel 27
Present Real Power Demand - Channel 27 AI262
x
x
x
kW
1
2388/2389
kW Present Demand: Channel 28
Present Real Power Demand - Channel 28 AI263
x
x
x
kW
1
2390/2391
kW Present Demand: Channel 29
Present Real Power Demand - Channel 29 AI264
x
x
x
kW
1
2392/2393
kW Present Demand: Channel 30
Present Real Power Demand - Channel 30 AI265
x
x
x
kW
1
2394/2395
kW Present Demand: Channel 31
Present Real Power Demand - Channel 31 AI266
x
x
x
kW
1
2396/2397
kW Present Demand: Channel 32
Present Real Power Demand - Channel 32 AI267
x
x
x
kW
1
2398/2399
kW Present Demand: Channel 33
Present Real Power Demand - Channel 33 AI268
x
x
x
kW
1
2400/2401
kW Present Demand: Channel 34
Present Real Power Demand - Channel 34 AI269
x
x
x
kW
1
2402/2403
kW Present Demand: Channel 35
Present Real Power Demand - Channel 35 AI270
x
x
x
kW
1
2404/2405
kW Present Demand: Channel 36
Present Real Power Demand - Channel 36 AI271
x
x
x
kW
1
2406/2407
kW Present Demand: Channel 37
Present Real Power Demand - Channel 37 AI272
x
x
x
kW
1
2408/2409
kW Present Demand: Channel 38
Present Real Power Demand - Channel 38 AI273
x
x
x
kW
1
2410/2411
kW Present Demand: Channel 39
Present Real Power Demand - Channel 39 AI274
x
x
x
kW
1
2412/2413
kW Present Demand: Channel 40
Present Real Power Demand - Channel 40 AI275
x
x
x
kW
1
2414/2415
kW Present Demand: Channel 41
Present Real Power Demand - Channel 41 AI276
x
x
x
kW
1
2416/2417
kW Present Demand: Channel 42
Present Real Power Demand - Channel 42 AI277
x
x
x
kW
1
2418/2419
kW Max Demand: Channel 1
Max Real Power Demand - Channel 1
AI278
x
x
x
kW
1
2420/2421
kW Max Demand: Channel 2
Max Real Power Demand - Channel 2
AI279
x
x
x
kW
1
2422/2423
kW Max Demand: Channel 3
Max Real Power Demand - Channel 3
AI280
x
x
x
kW
1
2424/2425
kW Max Demand: Channel 4
Max Real Power Demand - Channel 4
AI281
x
x
x
kW
1
2426/2427
kW Max Demand: Channel 5
Max Real Power Demand - Channel 5
AI282
x
x
x
kW
1
2428/2429
kW Max Demand: Channel 6
Max Real Power Demand - Channel 6
AI283
x
x
x
kW
1
2430/2431
kW Max Demand: Channel 7
Max Real Power Demand - Channel 7
AI284
x
x
x
kW
1
2432/2433
kW Max Demand: Channel 8
Max Real Power Demand - Channel 8
AI285
x
x
x
kW
1
2434/2435
kW Max Demand: Channel 9
Max Real Power Demand - Channel 9
AI286
x
x
x
kW
1
2436/2437
Data Variable
ZL0135-0A
Description
Page 56 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kW Max Demand: Channel 10
Max Real Power Demand - Channel 10
AI287
x
x
x
kW
1
2438/2439
kW Max Demand: Channel 11
Max Real Power Demand - Channel 11
AI288
x
x
x
kW
1
2440/2441
kW Max Demand: Channel 12
Max Real Power Demand - Channel 12
AI289
x
x
x
kW
1
2442/2443
kW Max Demand: Channel 13
Max Real Power Demand - Channel 13
AI290
x
x
x
kW
1
2444/2445
kW Max Demand: Channel 14
Max Real Power Demand - Channel 14
AI291
x
x
x
kW
1
2446/2447
kW Max Demand: Channel 15
Max Real Power Demand - Channel 15
AI292
x
x
x
kW
1
2448/2449
kW Max Demand: Channel 16
Max Real Power Demand - Channel 16
AI293
x
x
x
kW
1
2450/2451
kW Max Demand: Channel 17
Max Real Power Demand - Channel 17
AI294
x
x
x
kW
1
2452/2453
kW Max Demand: Channel 18
Max Real Power Demand - Channel 18
AI295
x
x
x
kW
1
2454/2455
kW Max Demand: Channel 19
Max Real Power Demand - Channel 19
AI296
x
x
x
kW
1
2456/2457
kW Max Demand: Channel 20
Max Real Power Demand - Channel 20
AI297
x
x
x
kW
1
2458/2459
kW Max Demand: Channel 21
Max Real Power Demand - Channel 21
AI298
x
x
x
kW
1
2460/2461
kW Max Demand: Channel 22
Max Real Power Demand - Channel 22
AI299
x
x
x
kW
1
2462/2463
kW Max Demand: Channel 23
Max Real Power Demand - Channel 23
AI300
x
x
x
kW
1
2464/2465
kW Max Demand: Channel 24
Max Real Power Demand - Channel 24
AI301
x
x
x
kW
1
2466/2467
kW Max Demand: Channel 25
Max Real Power Demand - Channel 25
AI302
x
x
x
kW
1
2468/2469
kW Max Demand: Channel 26
Max Real Power Demand - Channel 26
AI303
x
x
x
kW
1
2470/2471
kW Max Demand: Channel 27
Max Real Power Demand - Channel 27
AI304
x
x
x
kW
1
2472/2473
kW Max Demand: Channel 28
Max Real Power Demand - Channel 28
AI305
x
x
x
kW
1
2474/2475
kW Max Demand: Channel 29
Max Real Power Demand - Channel 29
AI306
x
x
x
kW
1
2476/2477
kW Max Demand: Channel 30
Max Real Power Demand - Channel 30
AI307
x
x
x
kW
1
2478/2479
kW Max Demand: Channel 31
Max Real Power Demand - Channel 31
AI308
x
x
x
kW
1
2480/2481
kW Max Demand: Channel 32
Max Real Power Demand - Channel 32
AI309
x
x
x
kW
1
2482/2483
kW Max Demand: Channel 33
Max Real Power Demand - Channel 33
AI310
x
x
x
kW
1
2484/2485
kW Max Demand: Channel 34
Max Real Power Demand - Channel 34
AI311
x
x
x
kW
1
2486/2487
kW Max Demand: Channel 35
Max Real Power Demand - Channel 35
AI312
x
x
x
kW
1
2488/2489
kW Max Demand: Channel 36
Max Real Power Demand - Channel 36
AI313
x
x
x
kW
1
2490/2491
kW Max Demand: Channel 37
Max Real Power Demand - Channel 37
AI314
x
x
x
kW
1
2492/2493
kW Max Demand: Channel 38
Max Real Power Demand - Channel 38
AI315
x
x
x
kW
1
2494/2495
kW Max Demand: Channel 39
Max Real Power Demand - Channel 39
AI316
x
x
x
kW
1
2496/2497
kW Max Demand: Channel 40
Max Real Power Demand - Channel 40
AI317
x
x
x
kW
1
2498/2499
kW Max Demand: Channel 41
Max Real Power Demand - Channel 41
AI318
x
x
x
kW
1
2500/2501
kW Max Demand: Channel 42
Max Real Power Demand - Channel 42
AI319
x
x
x
kW
1
2502/2503
Amps Present Demand: Channel 1
Present Current Demand - Channel 1
AI320
x
x
x
Amperes
5
2504/2505
Amps Present Demand: Channel 2
Present Current Demand - Channel 2
AI321
x
x
x
Amperes
5
2506/2507
Amps Present Demand: Channel 3
Present Current Demand - Channel 3
AI322
x
x
x
Amperes
5
2508/2509
Amps Present Demand: Channel 4
Present Current Demand - Channel 4
AI323
x
x
x
Amperes
5
2510/2511
Data Variable
ZL0135-0A
Description
Page 57 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Amps Present Demand: Channel 5
Present Current Demand - Channel 5
AI324
x
x
x
Amperes
5
2512/2513
Amps Present Demand: Channel 6
Present Current Demand - Channel 6
AI325
x
x
x
Amperes
5
2514/2515
Amps Present Demand: Channel 7
Present Current Demand - Channel 7
AI326
x
x
x
Amperes
5
2516/2517
Amps Present Demand: Channel 8
Present Current Demand - Channel 8
AI327
x
x
x
Amperes
5
2518/2519
Amps Present Demand: Channel 9
Present Current Demand - Channel 9
AI328
x
x
x
Amperes
5
2520/2521
Amps Present Demand: Channel 10
Present Current Demand - Channel 10
AI329
x
x
x
Amperes
5
2522/2523
Amps Present Demand: Channel 11
Present Current Demand - Channel 11
AI330
x
x
x
Amperes
5
2524/2525
Amps Present Demand: Channel 12
Present Current Demand - Channel 12
AI331
x
x
x
Amperes
5
2526/2527
Amps Present Demand: Channel 13
Present Current Demand - Channel 13
AI332
x
x
x
Amperes
5
2528/2529
Amps Present Demand: Channel 14
Present Current Demand - Channel 14
AI333
x
x
x
Amperes
5
2530/2531
Amps Present Demand: Channel 15
Present Current Demand - Channel 15
AI334
x
x
x
Amperes
5
2532/2533
Amps Present Demand: Channel 16
Present Current Demand - Channel 16
AI335
x
x
x
Amperes
5
2534/2535
Amps Present Demand: Channel 17
Present Current Demand - Channel 17
AI336
x
x
x
Amperes
5
2536/2537
Amps Present Demand: Channel 18
Present Current Demand - Channel 18
AI337
x
x
x
Amperes
5
2538/2539
Amps Present Demand: Channel 19
Present Current Demand - Channel 19
AI338
x
x
x
Amperes
5
2540/2541
Amps Present Demand: Channel 20
Present Current Demand - Channel 20
AI339
x
x
x
Amperes
5
2542/2543
Amps Present Demand: Channel 21
Present Current Demand - Channel 21
AI340
x
x
x
Amperes
5
2544/2545
Amps Present Demand: Channel 22
Present Current Demand - Channel 22
AI341
x
x
x
Amperes
5
2546/2547
Amps Present Demand: Channel 23
Present Current Demand - Channel 23
AI342
x
x
x
Amperes
5
2548/2549
Amps Present Demand: Channel 24
Present Current Demand - Channel 24
AI343
x
x
x
Amperes
5
2550/2551
Amps Present Demand: Channel 25
Present Current Demand - Channel 25
AI344
x
x
x
Amperes
5
2552/2553
Amps Present Demand: Channel 26
Present Current Demand - Channel 26
AI345
x
x
x
Amperes
5
2554/2555
Amps Present Demand: Channel 27
Present Current Demand - Channel 27
AI346
x
x
x
Amperes
5
2556/2557
Amps Present Demand: Channel 28
Present Current Demand - Channel 28
AI347
x
x
x
Amperes
5
2558/2559
Amps Present Demand: Channel 29
Present Current Demand - Channel 29
AI348
x
x
x
Amperes
5
2560/2561
Amps Present Demand: Channel 30
Present Current Demand - Channel 30
AI349
x
x
x
Amperes
5
2562/2563
Amps Present Demand: Channel 31
Present Current Demand - Channel 31
AI350
x
x
x
Amperes
5
2564/2565
Amps Present Demand: Channel 32
Present Current Demand - Channel 32
AI351
x
x
x
Amperes
5
2566/2567
Amps Present Demand: Channel 33
Present Current Demand - Channel 33
AI352
x
x
x
Amperes
5
2568/2569
Amps Present Demand: Channel 34
Present Current Demand - Channel 34
AI353
x
x
x
Amperes
5
2570/2571
Amps Present Demand: Channel 35
Present Current Demand - Channel 35
AI354
x
x
x
Amperes
5
2572/2573
Amps Present Demand: Channel 36
Present Current Demand - Channel 36
AI355
x
x
x
Amperes
5
2574/2575
Amps Present Demand: Channel 37
Present Current Demand - Channel 37
AI356
x
x
x
Amperes
5
2576/2577
Amps Present Demand: Channel 38
Present Current Demand - Channel 38
AI357
x
x
x
Amperes
5
2578/2579
Amps Present Demand: Channel 39
Present Current Demand - Channel 39
AI358
x
x
x
Amperes
5
2580/2581
Amps Present Demand: Channel 40
Present Current Demand - Channel 40
AI359
x
x
x
Amperes
5
2582/2583
Amps Present Demand: Channel 41
Present Current Demand - Channel 41
AI360
x
x
x
Amperes
5
2584/2585
Data Variable
ZL0135-0A
Description
Page 58 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Amps Present Demand: Channel 42
Present Current Demand - Channel 42
AI361
x
x
x
Amperes
5
2586/2587
Amps Max Demand: Channel 1
Max Current Demand - Channel 1
AI362
x
x
x
Amperes
5
2588/2589
Amps Max Demand: Channel 2
Max Current Demand - Channel 2
AI363
x
x
x
Amperes
5
2590/2591
Amps Max Demand: Channel 3
Max Current Demand - Channel 3
AI364
x
x
x
Amperes
5
2592/2593
Amps Max Demand: Channel 4
Max Current Demand - Channel 4
AI365
x
x
x
Amperes
5
2594/2595
Amps Max Demand: Channel 5
Max Current Demand - Channel 5
AI366
x
x
x
Amperes
5
2596/2597
Amps Max Demand: Channel 6
Max Current Demand - Channel 6
AI367
x
x
x
Amperes
5
2598/2599
Amps Max Demand: Channel 7
Max Current Demand - Channel 7
AI368
x
x
x
Amperes
5
2600/2601
Amps Max Demand: Channel 8
Max Current Demand - Channel 8
AI369
x
x
x
Amperes
5
2602/2603
Amps Max Demand: Channel 9
Max Current Demand - Channel 9
AI370
x
x
x
Amperes
5
2604/2605
Amps Max Demand: Channel 10
Max Current Demand - Channel 10
AI371
x
x
x
Amperes
5
2606/2607
Amps Max Demand: Channel 11
Max Current Demand - Channel 11
AI372
x
x
x
Amperes
5
2608/2609
Amps Max Demand: Channel 12
Max Current Demand - Channel 12
AI373
x
x
x
Amperes
5
2610/2611
Amps Max Demand: Channel 13
Max Current Demand - Channel 13
AI374
x
x
x
Amperes
5
2612/2613
Amps Max Demand: Channel 14
Max Current Demand - Channel 14
AI375
x
x
x
Amperes
5
2614/2615
Amps Max Demand: Channel 15
Max Current Demand - Channel 15
AI376
x
x
x
Amperes
5
2616/2617
Amps Max Demand: Channel 16
Max Current Demand - Channel 16
AI377
x
x
x
Amperes
5
2618/2619
Amps Max Demand: Channel 17
Max Current Demand - Channel 17
AI378
x
x
x
Amperes
5
2620/2621
Amps Max Demand: Channel 18
Max Current Demand - Channel 18
AI379
x
x
x
Amperes
5
2622/2623
Amps Max Demand: Channel 19
Max Current Demand - Channel 19
AI380
x
x
x
Amperes
5
2624/2625
Amps Max Demand: Channel 20
Max Current Demand - Channel 20
AI381
x
x
x
Amperes
5
2626/2627
Amps Max Demand: Channel 21
Max Current Demand - Channel 21
AI382
x
x
x
Amperes
5
2628/2629
Amps Max Demand: Channel 22
Max Current Demand - Channel 22
AI383
x
x
x
Amperes
5
2630/2631
Amps Max Demand: Channel 23
Max Current Demand - Channel 23
AI384
x
x
x
Amperes
5
2632/2633
Amps Max Demand: Channel 24
Max Current Demand - Channel 24
AI385
x
x
x
Amperes
5
2634/2635
Amps Max Demand: Channel 25
Max Current Demand - Channel 25
AI386
x
x
x
Amperes
5
2636/2637
Amps Max Demand: Channel 26
Max Current Demand - Channel 26
AI387
x
x
x
Amperes
5
2638/2639
Amps Max Demand: Channel 27
Max Current Demand - Channel 27
AI388
x
x
x
Amperes
5
2640/2641
Amps Max Demand: Channel 28
Max Current Demand - Channel 28
AI389
x
x
x
Amperes
5
2642/2643
Amps Max Demand: Channel 29
Max Current Demand - Channel 29
AI390
x
x
x
Amperes
5
2644/2645
Amps Max Demand: Channel 30
Max Current Demand - Channel 30
AI391
x
x
x
Amperes
5
2646/2647
Amps Max Demand: Channel 31
Max Current Demand - Channel 31
AI392
x
x
x
Amperes
5
2648/2649
Amps Max Demand: Channel 32
Max Current Demand - Channel 32
AI393
x
x
x
Amperes
5
2650/2651
Amps Max Demand: Channel 33
Max Current Demand - Channel 33
AI394
x
x
x
Amperes
5
2652/2653
Amps Max Demand: Channel 34
Max Current Demand - Channel 34
AI395
x
x
x
Amperes
5
2654/2655
Amps Max Demand: Channel 35
Max Current Demand - Channel 35
AI396
x
x
x
Amperes
5
2656/2657
Amps Max Demand: Channel 36
Max Current Demand - Channel 36
AI397
x
x
x
Amperes
5
2658/2659
Data Variable
ZL0135-0A
Description
Page 59 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Amps Max Demand: Channel 37
Max Current Demand - Channel 37
AI398
x
x
x
Amperes
5
2660/2661
Amps Max Demand: Channel 38
Max Current Demand - Channel 38
AI399
x
x
x
Amperes
5
2662/2663
Amps Max Demand: Channel 39
Max Current Demand - Channel 39
AI400
x
x
x
Amperes
5
2664/2665
Amps Max Demand: Channel 40
Max Current Demand - Channel 40
AI401
x
x
x
Amperes
5
2666/2667
Amps Max Demand: Channel 41
Max Current Demand - Channel 41
AI402
x
x
x
Amperes
5
2668/2669
Amps Max Demand: Channel 42
Max Current Demand - Channel 42
AI403
x
x
x
Amperes
5
2670/2671
kW Max Total: Channel 1
Max Instantaneous Real Power - Chan 1
AI404
x
x
x
kW
1
2672/2673
kW Max Total: Channel 2
Max Instantaneous Real Power - Chan 2
AI405
x
x
x
kW
1
2674/2675
kW Max Total: Channel 3
Max Instantaneous Real Power - Chan 3
AI406
x
x
x
kW
1
2676/2677
kW Max Total: Channel 4
Max Instantaneous Real Power - Chan 4
AI407
x
x
x
kW
1
2678/2679
kW Max Total: Channel 5
Max Instantaneous Real Power - Chan 5
AI408
x
x
x
kW
1
2680/2681
kW Max Total: Channel 6
Max Instantaneous Real Power - Chan 6
AI409
x
x
x
kW
1
2682/2683
kW Max Total: Channel 7
Max Instantaneous Real Power - Chan 7
AI410
x
x
x
kW
1
2684/2685
kW Max Total: Channel 8
Max Instantaneous Real Power - Chan 8
AI411
x
x
x
kW
1
2686/2687
kW Max Total: Channel 9
Max Instantaneous Real Power - Chan 9
AI412
x
x
x
kW
1
2688/2689
kW Max Total: Channel 10
Max Instantaneous Real Power - Chan 10
AI413
x
x
x
kW
1
2690/2691
kW Max Total: Channel 11
Max Instantaneous Real Power - Chan 11
AI414
x
x
x
kW
1
2692/2693
kW Max Total: Channel 12
Max Instantaneous Real Power - Chan 12
AI415
x
x
x
kW
1
2694/2695
kW Max Total: Channel 13
Max Instantaneous Real Power - Chan 13
AI416
x
x
x
kW
1
2696/2697
kW Max Total: Channel 14
Max Instantaneous Real Power - Chan 14
AI417
x
x
x
kW
1
2698/2699
kW Max Total: Channel 15
Max Instantaneous Real Power - Chan 15
AI418
x
x
x
kW
1
2700/2701
kW Max Total: Channel 16
Max Instantaneous Real Power - Chan 16
AI419
x
x
x
kW
1
2702/2703
kW Max Total: Channel 17
Max Instantaneous Real Power - Chan 17
AI420
x
x
x
kW
1
2704/2705
kW Max Total: Channel 18
Max Instantaneous Real Power - Chan 18
AI421
x
x
x
kW
1
2706/2707
kW Max Total: Channel 19
Max Instantaneous Real Power - Chan 19
AI422
x
x
x
kW
1
2708/2709
kW Max Total: Channel 20
Max Instantaneous Real Power - Chan 20
AI423
x
x
x
kW
1
2710/2711
kW Max Total: Channel 21
Max Instantaneous Real Power - Chan 21
AI424
x
x
x
kW
1
2712/2713
kW Max Total: Channel 22
Max Instantaneous Real Power - Chan 22
AI425
x
x
x
kW
1
2714/2715
kW Max Total: Channel 23
Max Instantaneous Real Power - Chan 23
AI426
x
x
x
kW
1
2716/2717
kW Max Total: Channel 24
Max Instantaneous Real Power - Chan 24
AI427
x
x
x
kW
1
2718/2719
kW Max Total: Channel 25
Max Instantaneous Real Power - Chan 25
AI428
x
x
x
kW
1
2720/2721
kW Max Total: Channel 26
Max Instantaneous Real Power - Chan 26
AI429
x
x
x
kW
1
2722/2723
kW Max Total: Channel 27
Max Instantaneous Real Power - Chan 27
AI430
x
x
x
kW
1
2724/2725
kW Max Total: Channel 28
Max Instantaneous Real Power - Chan 28
AI431
x
x
x
kW
1
2726/2727
kW Max Total: Channel 29
Max Instantaneous Real Power - Chan 29
AI432
x
x
x
kW
1
2728/2729
kW Max Total: Channel 30
Max Instantaneous Real Power - Chan 30
AI433
x
x
x
kW
1
2730/2731
Data Variable
ZL0135-0A
Description
Page 60 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kW Max Total: Channel 31
Max Instantaneous Real Power - Chan 31
AI434
x
x
x
kW
1
2732/2733
kW Max Total: Channel 32
Max Instantaneous Real Power - Chan 32
AI435
x
x
x
kW
1
2734/2735
kW Max Total: Channel 33
Max Instantaneous Real Power - Chan 33
AI436
x
x
x
kW
1
2736/2737
kW Max Total: Channel 34
Max Instantaneous Real Power - Chan 34
AI437
x
x
x
kW
1
2738/2739
kW Max Total: Channel 35
Max Instantaneous Real Power - Chan 35
AI438
x
x
x
kW
1
2740/2741
kW Max Total: Channel 36
Max Instantaneous Real Power - Chan 36
AI439
x
x
x
kW
1
2742/2743
kW Max Total: Channel 37
Max Instantaneous Real Power - Chan 37
AI440
x
x
x
kW
1
2744/2745
kW Max Total: Channel 38
Max Instantaneous Real Power - Chan 38
AI441
x
x
x
kW
1
2746/2747
kW Max Total: Channel 39
Max Instantaneous Real Power - Chan 39
AI442
x
x
x
kW
1
2748/2749
kW Max Total: Channel 40
Max Instantaneous Real Power - Chan 40
AI443
x
x
x
kW
1
2750/2751
kW Max Total: Channel 41
Max Instantaneous Real Power - Chan 41
AI444
x
x
x
kW
1
2752/2753
kW Max Total: Channel 42
Max Instantaneous Real Power - Chan 42
AI445
x
x
x
kW
1
2754/2755
Max Amps: Channel 1
Max Instantaneous Current - Channel 1
AI446
x
x
x
Amperes
5
2756/2757
Max Amps: Channel 2
Max Instantaneous Current - Channel 2
AI447
x
x
x
Amperes
5
2758/2759
Max Amps: Channel 3
Max Instantaneous Current - Channel 3
AI448
x
x
x
Amperes
5
2760/2761
Max Amps: Channel 4
Max Instantaneous Current - Channel 4
AI449
x
x
x
Amperes
5
2762/2763
Max Amps: Channel 5
Max Instantaneous Current - Channel 5
AI450
x
x
x
Amperes
5
2764/2765
Max Amps: Channel 6
Max Instantaneous Current - Channel 6
AI451
x
x
x
Amperes
5
2766/2767
Max Amps: Channel 7
Max Instantaneous Current - Channel 7
AI452
x
x
x
Amperes
5
2768/2769
Max Amps: Channel 8
Max Instantaneous Current - Channel 8
AI453
x
x
x
Amperes
5
2770/2771
Max Amps: Channel 9
Max Instantaneous Current - Channel 9
AI454
x
x
x
Amperes
5
2772/2773
Max Amps: Channel 10
Max Instantaneous Current - Channel 10
AI455
x
x
x
Amperes
5
2774/2775
Max Amps: Channel 11
Max Instantaneous Current - Channel 11
AI456
x
x
x
Amperes
5
2776/2777
Max Amps: Channel 12
Max Instantaneous Current - Channel 12
AI457
x
x
x
Amperes
5
2778/2779
Max Amps: Channel 13
Max Instantaneous Current - Channel 13
AI458
x
x
x
Amperes
5
2780/2781
Max Amps: Channel 14
Max Instantaneous Current - Channel 14
AI459
x
x
x
Amperes
5
2782/2783
Max Amps: Channel 15
Max Instantaneous Current - Channel 15
AI460
x
x
x
Amperes
5
2784/2785
Max Amps: Channel 16
Max Instantaneous Current - Channel 16
AI461
x
x
x
Amperes
5
2786/2787
Max Amps: Channel 17
Max Instantaneous Current - Channel 17
AI462
x
x
x
Amperes
5
2788/2789
Max Amps: Channel 18
Max Instantaneous Current - Channel 18
AI463
x
x
x
Amperes
5
2790/2791
Max Amps: Channel 19
Max Instantaneous Current - Channel 19
AI464
x
x
x
Amperes
5
2792/2793
Max Amps: Channel 20
Max Instantaneous Current - Channel 20
AI465
x
x
x
Amperes
5
2794/2795
Max Amps: Channel 21
Max Instantaneous Current - Channel 21
AI466
x
x
x
Amperes
5
2796/2797
Max Amps: Channel 22
Max Instantaneous Current - Channel 22
AI467
x
x
x
Amperes
5
2798/2799
Max Amps: Channel 23
Max Instantaneous Current - Channel 23
AI468
x
x
x
Amperes
5
2800/2801
Max Amps: Channel 24
Max Instantaneous Current - Channel 24
AI469
x
x
x
Amperes
5
2802/2803
Max Amps: Channel 25
Max Instantaneous Current - Channel 25
AI470
x
x
x
Amperes
5
2804/2805
Data Variable
ZL0135-0A
Description
Page 61 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Max Amps: Channel 26
Max Instantaneous Current - Channel 26
AI471
x
x
x
Amperes
5
2806/2807
Max Amps: Channel 27
Max Instantaneous Current - Channel 27
AI472
x
x
x
Amperes
5
2808/2809
Max Amps: Channel 28
Max Instantaneous Current - Channel 28
AI473
x
x
x
Amperes
5
2810/2811
Max Amps: Channel 29
Max Instantaneous Current - Channel 29
AI474
x
x
x
Amperes
5
2812/2813
Max Amps: Channel 30
Max Instantaneous Current - Channel 30
AI475
x
x
x
Amperes
5
2814/2815
Max Amps: Channel 31
Max Instantaneous Current - Channel 31
AI476
x
x
x
Amperes
5
2816/2817
Max Amps: Channel 32
Max Instantaneous Current - Channel 32
AI477
x
x
x
Amperes
5
2818/2819
Max Amps: Channel 33
Max Instantaneous Current - Channel 33
AI478
x
x
x
Amperes
5
2820/2821
Max Amps: Channel 34
Max Instantaneous Current - Channel 34
AI479
x
x
x
Amperes
5
2822/2823
Max Amps: Channel 35
Max Instantaneous Current - Channel 35
AI480
x
x
x
Amperes
5
2824/2825
Max Amps: Channel 36
Max Instantaneous Current - Channel 36
AI481
x
x
x
Amperes
5
2826/2827
Max Amps: Channel 37
Max Instantaneous Current - Channel 37
AI482
x
x
x
Amperes
5
2828/2829
Max Amps: Channel 38
Max Instantaneous Current - Channel 38
AI483
x
x
x
Amperes
5
2830/2831
Max Amps: Channel 39
Max Instantaneous Current - Channel 39
AI484
x
x
x
Amperes
5
2832/2833
Max Amps: Channel 40
Max Instantaneous Current - Channel 40
AI485
x
x
x
Amperes
5
2834/2835
Max Amps: Channel 41
Max Instantaneous Current - Channel 41
AI486
x
x
x
Amperes
5
2836/2837
Max Amps: Channel 42
Max Instantaneous Current - Channel 42
AI487
x
x
x
Amperes
5
2838/2839
kVA: Channel 1
Instantaneous Apparent Power - Chan 1
AI488
x
x
x
kVA
1
2840/2841
kVA: Channel 2
Instantaneous Apparent Power - Chan 2
AI489
x
x
x
kVA
1
2842/2843
kVA: Channel 3
Instantaneous Apparent Power - Chan 3
AI490
x
x
x
kVA
1
2844/2845
kVA: Channel 4
Instantaneous Apparent Power - Chan 4
AI491
x
x
x
kVA
1
2846/2847
kVA: Channel 5
Instantaneous Apparent Power - Chan 5
AI492
x
x
x
kVA
1
2848/2849
kVA: Channel 6
Instantaneous Apparent Power - Chan 6
AI493
x
x
x
kVA
1
2850/2851
kVA: Channel 7
Instantaneous Apparent Power - Chan 7
AI494
x
x
x
kVA
1
2852/2853
kVA: Channel 8
Instantaneous Apparent Power - Chan 8
AI495
x
x
x
kVA
1
2854/2855
kVA: Channel 9
Instantaneous Apparent Power - Chan 9
AI496
x
x
x
kVA
1
2856/2857
kVA: Channel 10
Instantaneous Apparent Power - Chan 10
AI497
x
x
x
kVA
1
2858/2859
kVA: Channel 11
Instantaneous Apparent Power - Chan 11
AI498
x
x
x
kVA
1
2860/2861
kVA: Channel 12
Instantaneous Apparent Power - Chan 12
AI499
x
x
x
kVA
1
2862/2863
kVA: Channel 13
Instantaneous Apparent Power - Chan 13
AI500
x
x
x
kVA
1
2864/2865
kVA: Channel 14
Instantaneous Apparent Power - Chan 14
AI501
x
x
x
kVA
1
2866/2867
kVA: Channel 15
Instantaneous Apparent Power - Chan 15
AI502
x
x
x
kVA
1
2868/2869
kVA: Channel 16
Instantaneous Apparent Power - Chan 16
AI503
x
x
x
kVA
1
2870/2871
kVA: Channel 17
Instantaneous Apparent Power - Chan 17
AI504
x
x
x
kVA
1
2872/2873
kVA: Channel 18
Instantaneous Apparent Power - Chan 18
AI505
x
x
x
kVA
1
2874/2875
kVA: Channel 19
Instantaneous Apparent Power - Chan 19
AI506
x
x
x
kVA
1
2876/2877
Data Variable
ZL0135-0A
Description
Page 62 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
kVA: Channel 20
Instantaneous Apparent Power - Chan 20
AI507
x
x
x
kVA
1
2878/2879
kVA: Channel 21
Instantaneous Apparent Power - Chan 21
AI508
x
x
x
kVA
1
2880/2881
kVA: Channel 22
Instantaneous Apparent Power - Chan 22
AI509
x
x
x
kVA
1
2882/2883
kVA: Channel 23
Instantaneous Apparent Power - Chan 23
AI510
x
x
x
kVA
1
2884/2885
kVA: Channel 24
Instantaneous Apparent Power - Chan 24
AI511
x
x
x
kVA
1
2886/2887
kVA: Channel 25
Instantaneous Apparent Power - Chan 25
AI512
x
x
x
kVA
1
2888/2889
kVA: Channel 26
Instantaneous Apparent Power - Chan 26
AI513
x
x
x
kVA
1
2890/2891
kVA: Channel 27
Instantaneous Apparent Power - Chan 27
AI514
x
x
x
kVA
1
2892/2893
kVA: Channel 28
Instantaneous Apparent Power - Chan 28
AI515
x
x
x
kVA
1
2894/2895
kVA: Channel 29
Instantaneous Apparent Power - Chan 29
AI516
x
x
x
kVA
1
2896/2897
kVA: Channel 30
Instantaneous Apparent Power - Chan 30
AI517
x
x
x
kVA
1
2898/2899
kVA: Channel 31
Instantaneous Apparent Power - Chan 31
AI518
x
x
x
kVA
1
2900/2901
kVA: Channel 32
Instantaneous Apparent Power - Chan 32
AI519
x
x
x
kVA
1
2902/2903
kVA: Channel 33
Instantaneous Apparent Power - Chan 33
AI520
x
x
x
kVA
1
2904/2905
kVA: Channel 34
Instantaneous Apparent Power - Chan 34
AI521
x
x
x
kVA
1
2906/2907
kVA: Channel 35
Instantaneous Apparent Power - Chan 35
AI522
x
x
x
kVA
1
2908/2909
kVA: Channel 36
Instantaneous Apparent Power - Chan 36
AI523
x
x
x
kVA
1
2910/2911
kVA: Channel 37
Instantaneous Apparent Power - Chan 37
AI524
x
x
x
kVA
1
2912/2913
kVA: Channel 38
Instantaneous Apparent Power - Chan 38
AI525
x
x
x
kVA
1
2914/2915
kVA: Channel 39
Instantaneous Apparent Power - Chan 39
AI526
x
x
x
kVA
1
2916/2917
kVA: Channel 40
Instantaneous Apparent Power - Chan 40
AI527
x
x
x
kVA
1
2918/2919
kVA: Channel 41
Instantaneous Apparent Power - Chan 41
AI528
x
x
x
kVA
1
2920/2921
kVA: Channel 42
Instantaneous Apparent Power - Chan 42
AI529
x
x
x
kVA
1
2922/2923
Amp Phase Angle: Aux Phase 1 (Ch 43) Amperage Phase Angle - Aux ph1 (Ch 43) AI530
x
degreesphase
10
686/687
Amp Phase Angle: Aux Phase 2 (Ch 44) Amperage Phase Angle - Aux ph2 (Ch 44) AI531
x
degreesphase
10
688/689
Amp Phase Angle: Aux Phase 3 (Ch 45) Amperage Phase Angle - Aux ph3 (Ch 45) AI532
x
degreesphase
10
690/691
Volt Phase Angle: Aux Phase 1 (Ch 43)
Voltage Phase Angle - Aux ph1 (Ch 43)
AI533
x
degreesphase
10
694/695
Volt Phase Angle: Aux Phase 2 (Ch 44)
Voltage Phase Angle - Aux ph2 (Ch 44)
AI534
x
degreesphase
10
696/697
Volt Phase Angle: Aux Phase 3 (Ch 45)
Voltage Phase Angle - Aux ph3 (Ch 45)
AI535
x
degreesphase
10
698/699
Non-Latching Alarm Logical Circuit 1
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI536
x
No-Units
0
10061
Non-Latching Alarm Logical Circuit 2
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI537
x
No-Units
0
11061
Data Variable
ZL0135-0A
Description
Page 63 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI538
x
No-Units
0
12061
Non-Latching Alarm Logical Circuit 4
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI539
x
No-Units
0
13061
Non-Latching Alarm Logical Circuit 5
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI540
x
No-Units
0
14061
Non-Latching Alarm Logical Circuit 6
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI541
x
No-Units
0
15061
Non-Latching Alarm Logical Circuit 7
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI542
x
No-Units
0
16061
Non-Latching Alarm Logical Circuit 8
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI543
x
No-Units
0
17061
Non-Latching Alarm Logical Circuit 9
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI544
x
No-Units
0
18061
Non-Latching Alarm Logical Circuit 10
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI545
x
No-Units
0
19061
Non-Latching Alarm Logical Circuit 11
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI546
x
No-Units
0
20061
Non-Latching Alarm Logical Circuit 12
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI547
x
No-Units
0
21061
Non-Latching Alarm Logical Circuit 13
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI548
x
No-Units
0
22061
Non-Latching Alarm Logical Circuit 14
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI549
x
No-Units
0
23061
Non-Latching Alarm Logical Circuit 15
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI550
x
No-Units
0
24061
Non-Latching Alarm Logical Circuit 16
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI551
x
No-Units
0
25061
Non-Latching Alarm Logical Circuit 17
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI552
x
No-Units
0
26061
Non-Latching Alarm Logical Circuit 18
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI553
x
No-Units
0
27061
Non-Latching Alarm Logical Circuit 19
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI554
x
No-Units
0
28061
Non-Latching Alarm Logical Circuit 20
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI555
x
No-Units
0
29061
Non-Latching Alarm Logical Circuit 21
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI556
x
No-Units
0
30061
Non-Latching Alarm Logical Circuit 22
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI557
x
No-Units
0
31061
Non-Latching Alarm Logical Circuit 23
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI558
x
No-Units
0
32061
Non-Latching Alarm Logical Circuit 24
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI559
x
No-Units
0
33061
Non-Latching Alarm Logical Circuit 25
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI560
x
No-Units
0
34061
ZL0135-0A
Description
Page 64 of 162
FW < V1.016
FW> = V1.203
Non-Latching Alarm Logical Circuit 3
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI561
x
No-Units
0
35061
Non-Latching Alarm Logical Circuit 27
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI562
x
No-Units
0
36061
Non-Latching Alarm Logical Circuit 28
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI563
x
No-Units
0
37061
Non-Latching Alarm Logical Circuit 29
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI564
x
No-Units
0
38061
Non-Latching Alarm Logical Circuit 30
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI565
x
No-Units
0
39061
Non-Latching Alarm Logical Circuit 31
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI566
x
No-Units
0
40061
Non-Latching Alarm Logical Circuit 32
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI567
x
No-Units
0
41061
Non-Latching Alarm Logical Circuit 33
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI568
x
No-Units
0
42061
Non-Latching Alarm Logical Circuit 34
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI569
x
No-Units
0
43061
Non-Latching Alarm Logical Circuit 35
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI570
x
No-Units
0
44061
Non-Latching Alarm Logical Circuit 36
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI571
x
No-Units
0
45061
Non-Latching Alarm Logical Circuit 37
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI572
x
No-Units
0
46061
Non-Latching Alarm Logical Circuit 38
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI573
x
No-Units
0
47061
Non-Latching Alarm Logical Circuit 39
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI574
x
No-Units
0
48061
Non-Latching Alarm Logical Circuit 30
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI575
x
No-Units
0
49061
Non-Latching Alarm Logical Circuit 41
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI576
x
No-Units
0
50061
Non-Latching Alarm Logical Circuit 42
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI577
x
No-Units
0
51061
Non-Latching Alarm Logical Circuit 43
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI578
x
No-Units
0
52061
Non-Latching Alarm Logical Circuit 44
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI579
x
No-Units
0
53061
Non-Latching Alarm Logical Circuit 45
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI580
x
No-Units
0
54061
Non-Latching Alarm Logical Circuit 46
bitmap: (0=HH;1=H;2=L;3=LL;415=rsv)
AI581
x
No-Units
0
55061
Number of Channels Logical Circuit 1
Number of Channels Assigned to Logical
Circuit 1
AI582
x
No-Units
0
10001
ZL0135-0A
Description
Page 65 of 162
FW < V1.016
FW> = V1.203
Non-Latching Alarm Logical Circuit 26
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Number of Channels Assigned to Logical
Circuit 2
AI583
x
No-Units
0
11001
Number of Channels Logical Circuit 3
Number of Channels Assigned to Logical
Circuit 3
AI584
x
No-Units
0
12001
Number of Channels Logical Circuit 4
Number of Channels Assigned to Logical
Circuit 4
AI585
x
No-Units
0
13001
Number of Channels Logical Circuit 5
Number of Channels Assigned to Logical
Circuit 5
AI586
x
No-Units
0
14001
Number of Channels Logical Circuit 6
Number of Channels Assigned to Logical
Circuit 6
AI587
x
No-Units
0
15001
Number of Channels Logical Circuit 7
Number of Channels Assigned to Logical
Circuit 7
AI588
x
No-Units
0
16001
Number of Channels Logical Circuit 8
Number of Channels Assigned to Logical
Circuit 8
AI589
x
No-Units
0
17001
Number of Channels Logical Circuit 9
Number of Channels Assigned to Logical
Circuit 9
AI590
x
No-Units
0
18001
Number of Channels Logical Circuit 10
Number of Channels Assigned to Logical
Circuit 10
AI591
x
No-Units
0
19001
Number of Channels Logical Circuit 11
Number of Channels Assigned to Logical
Circuit 11
AI592
x
No-Units
0
20001
Number of Channels Logical Circuit 12
Number of Channels Assigned to Logical
Circuit 12
AI593
x
No-Units
0
21001
Number of Channels Logical Circuit 13
Number of Channels Assigned to Logical
Circuit 13
AI594
x
No-Units
0
22001
Number of Channels Logical Circuit 14
Number of Channels Assigned to Logical
Circuit 14
AI595
x
No-Units
0
23001
Number of Channels Logical Circuit 15
Number of Channels Assigned to Logical
Circuit 15
AI596
x
No-Units
0
24001
Number of Channels Logical Circuit 16
Number of Channels Assigned to Logical
Circuit 16
AI597
x
No-Units
0
25001
Number of Channels Logical Circuit 17
Number of Channels Assigned to Logical
Circuit 17
AI598
x
No-Units
0
26001
Number of Channels Logical Circuit 18
Number of Channels Assigned to Logical
Circuit 18
AI599
x
No-Units
0
27001
Number of Channels Logical Circuit 19
Number of Channels Assigned to Logical
Circuit 19
AI600
x
No-Units
0
28001
Number of Channels Logical Circuit 20
Number of Channels Assigned to Logical
Circuit 20
AI601
x
No-Units
0
29001
Number of Channels Logical Circuit 21
Number of Channels Assigned to Logical
Circuit 21
AI602
x
No-Units
0
30001
Number of Channels Logical Circuit 22
Number of Channels Assigned to Logical
Circuit 22
AI603
x
No-Units
0
31001
Number of Channels Logical Circuit 23
Number of Channels Assigned to Logical
Circuit 23
AI604
x
No-Units
0
32001
ZL0135-0A
Description
Page 66 of 162
FW < V1.016
FW> = V1.203
Number of Channels Logical Circuit 2
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
AI605
x
No-Units
0
33001
AI606
x
No-Units
0
34001
Number of Channels Assigned to Logical
Circuit 26
AI607
x
No-Units
0
35001
Number of Channels Logical Circuit 27
Number of Channels Assigned to Logical
Circuit 27
AI608
x
No-Units
0
36001
Number of Channels Logical Circuit 28
Number of Channels Assigned to Logical
Circuit 28
AI609
x
No-Units
0
37001
Number of Channels Logical Circuit 29
Number of Channels Assigned to Logical
Circuit 29
AI610
x
No-Units
0
38001
Number of Channels Logical Circuit 30
Number of Channels Assigned to Logical
Circuit 30
AI611
x
No-Units
0
39001
Number of Channels Logical Circuit 31
Number of Channels Assigned to Logical
Circuit 31
AI612
x
No-Units
0
40001
Number of Channels Logical Circuit 32
Number of Channels Assigned to Logical
Circuit 32
AI613
x
No-Units
0
41001
Number of Channels Logical Circuit 33
Number of Channels Assigned to Logical
Circuit 33
AI614
x
No-Units
0
42001
Number of Channels Logical Circuit 34
Number of Channels Assigned to Logical
Circuit 34
AI615
x
No-Units
0
43001
Number of Channels Logical Circuit 35
Number of Channels Assigned to Logical
Circuit 35
AI616
x
No-Units
0
44001
Number of Channels Logical Circuit 36
Number of Channels Assigned to Logical
Circuit 36
AI617
x
No-Units
0
45001
Number of Channels Logical Circuit 37
Number of Channels Assigned to Logical
Circuit 37
AI618
x
No-Units
0
46001
Number of Channels Logical Circuit 38
Number of Channels Assigned to Logical
Circuit 38
AI619
x
No-Units
0
47001
Number of Channels Logical Circuit 39
Number of Channels Assigned to Logical
Circuit 39
AI620
x
No-Units
0
48001
Number of Channels Logical Circuit 30
Number of Channels Assigned to Logical
Circuit 40
AI621
x
No-Units
0
49001
Number of Channels Logical Circuit 41
Number of Channels Assigned to Logical
Circuit 41
AI622
x
No-Units
0
50001
Number of Channels Logical Circuit 42
Number of Channels Assigned to Logical
Circuit 42
AI623
x
No-Units
0
51001
Number of Channels Logical Circuit 43
Number of Channels Assigned to Logical
Circuit 43
AI624
x
No-Units
0
52001
Number of Channels Logical Circuit 44
Number of Channels Assigned to Logical
Circuit 44
AI625
x
No-Units
0
53001
Number of Channels Logical Circuit 45
Number of Channels Assigned to Logical
Circuit 45
AI626
x
No-Units
0
54001
Description
Number of Channels Logical Circuit 24
Number of Channels Assigned to Logical
Circuit 24
Number of Channels Logical Circuit 25
Number of Channels Assigned to Logical
Circuit 25
Number of Channels Logical Circuit 26
ZL0135-0A
Page 67 of 162
FW < V1.016
FW> = V1.203
Units
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
AI627
x
No-Units
0
55001
AI628
x
No-Units
0
10002
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI629
x
No-Units
0
11002
Logical Ckt 3: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI630
x
No-Units
0
12002
Logical Ckt 4: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI631
x
No-Units
0
13002
Logical Ckt 5: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI632
x
No-Units
0
14002
Logical Ckt 6: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI633
x
No-Units
0
15002
Logical Ckt 7: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI634
x
No-Units
0
16002
Logical Ckt 8: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI635
x
No-Units
0
17002
Logical Ckt 9: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI636
x
No-Units
0
18002
Logical Ckt 10: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI637
x
No-Units
0
19002
Logical Ckt 11: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI638
x
No-Units
0
20002
Logical Ckt 12: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI639
x
No-Units
0
21002
Logical Ckt 13: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI640
x
No-Units
0
22002
Logical Ckt 14: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI641
x
No-Units
0
23002
Logical Ckt 15: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI642
x
No-Units
0
24002
Logical Ckt 16: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI643
x
No-Units
0
25002
Logical Ckt 17: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI644
x
No-Units
0
26002
Logical Ckt 18: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI645
x
No-Units
0
27002
Logical Ckt 19: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI646
x
No-Units
0
28002
Logical Ckt 20: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI647
x
No-Units
0
29002
Logical Ckt 21: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI648
x
No-Units
0
30002
Description
Number of Channels Logical Circuit 46
Number of Channels Assigned to Logical
Circuit 46
Logical Ckt 1: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
Logical Ckt 2: Phase 1 - Panel & Chan
ZL0135-0A
Page 68 of 162
FW < V1.016
FW> = V1.203
Units
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI649
x
No-Units
0
31002
Logical Ckt 23: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI650
x
No-Units
0
32002
Logical Ckt 24: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI651
x
No-Units
0
33002
Logical Ckt 25: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI652
x
No-Units
0
34002
Logical Ckt 26: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI653
x
No-Units
0
35002
Logical Ckt 27: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI654
x
No-Units
0
36002
Logical Ckt 28: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI655
x
No-Units
0
37002
Logical Ckt 29: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI656
x
No-Units
0
38002
Logical Ckt 30: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI657
x
No-Units
0
39002
Logical Ckt 31: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI658
x
No-Units
0
40002
Logical Ckt 32: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI659
x
No-Units
0
41002
Logical Ckt 33: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI660
x
No-Units
0
42002
Logical Ckt 34: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI661
x
No-Units
0
43002
Logical Ckt 35: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI662
x
No-Units
0
44002
Logical Ckt 36: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI663
x
No-Units
0
45002
Logical Ckt 37: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI664
x
No-Units
0
46002
Logical Ckt 38: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI665
x
No-Units
0
47002
Logical Ckt 39: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI666
x
No-Units
0
48002
Logical Ckt 30: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI667
x
No-Units
0
49002
Logical Ckt 41: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI668
x
No-Units
0
50002
Logical Ckt 42: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI669
x
No-Units
0
51002
Logical Ckt 43: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI670
x
No-Units
0
52002
ZL0135-0A
Description
Page 69 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 22: Phase 1 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI671
x
No-Units
0
53002
Logical Ckt 45: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI672
x
No-Units
0
54002
Logical Ckt 46: Phase 1 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI673
x
No-Units
0
55002
Logical Ckt 1: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI674
x
No-Units
0
10003
Logical Ckt 2: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI675
x
No-Units
0
11003
Logical Ckt 3: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI676
x
No-Units
0
12003
Logical Ckt 4: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI677
x
No-Units
0
13003
Logical Ckt 5: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI678
x
No-Units
0
14003
Logical Ckt 6: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI679
x
No-Units
0
15003
Logical Ckt 7: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI680
x
No-Units
0
16003
Logical Ckt 8: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI681
x
No-Units
0
17003
Logical Ckt 9: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI682
x
No-Units
0
18003
Logical Ckt 10: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI683
x
No-Units
0
19003
Logical Ckt 11: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI684
x
No-Units
0
20003
Logical Ckt 12: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI685
x
No-Units
0
21003
Logical Ckt 13: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI686
x
No-Units
0
22003
Logical Ckt 14: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI687
x
No-Units
0
23003
Logical Ckt 15: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI688
x
No-Units
0
24003
Logical Ckt 16: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI689
x
No-Units
0
25003
Logical Ckt 17: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI690
x
No-Units
0
26003
Logical Ckt 18: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI691
x
No-Units
0
27003
Logical Ckt 19: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI692
x
No-Units
0
28003
ZL0135-0A
Description
Page 70 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 44: Phase 1 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI693
x
No-Units
0
29003
Logical Ckt 21: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI694
x
No-Units
0
30003
Logical Ckt 22: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI695
x
No-Units
0
31003
Logical Ckt 23: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI696
x
No-Units
0
32003
Logical Ckt 24: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI697
x
No-Units
0
33003
Logical Ckt 25: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI698
x
No-Units
0
34003
Logical Ckt 26: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI699
x
No-Units
0
35003
Logical Ckt 27: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI700
x
No-Units
0
36003
Logical Ckt 28: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI701
x
No-Units
0
37003
Logical Ckt 29: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI702
x
No-Units
0
38003
Logical Ckt 30: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI703
x
No-Units
0
39003
Logical Ckt 31: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI704
x
No-Units
0
40003
Logical Ckt 32: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI705
x
No-Units
0
41003
Logical Ckt 33: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI706
x
No-Units
0
42003
Logical Ckt 34: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI707
x
No-Units
0
43003
Logical Ckt 35: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI708
x
No-Units
0
44003
Logical Ckt 36: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI709
x
No-Units
0
45003
Logical Ckt 37: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI710
x
No-Units
0
46003
Logical Ckt 38: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI711
x
No-Units
0
47003
Logical Ckt 39: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI712
x
No-Units
0
48003
Logical Ckt 30: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI713
x
No-Units
0
49003
Logical Ckt 41: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI714
x
No-Units
0
50003
ZL0135-0A
Description
Page 71 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 20: Phase 2 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI715
x
No-Units
0
51003
Logical Ckt 43: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI716
x
No-Units
0
52003
Logical Ckt 44: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI717
x
No-Units
0
53003
Logical Ckt 45: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI718
x
No-Units
0
54003
Logical Ckt 46: Phase 2 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI719
x
No-Units
0
55003
Logical Ckt 1: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI720
x
No-Units
0
10004
Logical Ckt 2: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI721
x
No-Units
0
11004
Logical Ckt 3: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI722
x
No-Units
0
12004
Logical Ckt 4: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI723
x
No-Units
0
13004
Logical Ckt 5: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI724
x
No-Units
0
14004
Logical Ckt 6: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI725
x
No-Units
0
15004
Logical Ckt 7: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI726
x
No-Units
0
16004
Logical Ckt 8: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI727
x
No-Units
0
17004
Logical Ckt 9: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI728
x
No-Units
0
18004
Logical Ckt 10: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI729
x
No-Units
0
19004
Logical Ckt 11: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI730
x
No-Units
0
20004
Logical Ckt 12: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI731
x
No-Units
0
21004
Logical Ckt 13: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI732
x
No-Units
0
22004
Logical Ckt 14: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI733
x
No-Units
0
23004
Logical Ckt 15: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI734
x
No-Units
0
24004
Logical Ckt 16: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI735
x
No-Units
0
25004
Logical Ckt 17: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI736
x
No-Units
0
26004
ZL0135-0A
Description
Page 72 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 42: Phase 2 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI737
x
No-Units
0
27004
Logical Ckt 19: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI738
x
No-Units
0
28004
Logical Ckt 20: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI739
x
No-Units
0
29004
Logical Ckt 21: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI740
x
No-Units
0
30004
Logical Ckt 22: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI741
x
No-Units
0
31004
Logical Ckt 23: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI742
x
No-Units
0
32004
Logical Ckt 24: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI743
x
No-Units
0
33004
Logical Ckt 25: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI744
x
No-Units
0
34004
Logical Ckt 26: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI745
x
No-Units
0
35004
Logical Ckt 27: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI746
x
No-Units
0
36004
Logical Ckt 28: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI747
x
No-Units
0
37004
Logical Ckt 29: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI748
x
No-Units
0
38004
Logical Ckt 30: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI749
x
No-Units
0
39004
Logical Ckt 31: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI750
x
No-Units
0
40004
Logical Ckt 32: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI751
x
No-Units
0
41004
Logical Ckt 33: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI752
x
No-Units
0
42004
Logical Ckt 34: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI753
x
No-Units
0
43004
Logical Ckt 35: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI754
x
No-Units
0
44004
Logical Ckt 36: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI755
x
No-Units
0
45004
Logical Ckt 37: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI756
x
No-Units
0
46004
Logical Ckt 38: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI757
x
No-Units
0
47004
Logical Ckt 39: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI758
x
No-Units
0
48004
Logical Ckt 30: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI759
x
No-Units
0
49004
ZL0135-0A
Description
Page 73 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 18: Phase 3 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI760
x
No-Units
0
50004
Logical Ckt 42: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI761
x
No-Units
0
51004
Logical Ckt 43: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI762
x
No-Units
0
52004
Logical Ckt 44: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI763
x
No-Units
0
53004
Logical Ckt 45: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI764
x
No-Units
0
54004
Logical Ckt 46: Phase 3 - Panel & Chan
257-302=pnl1(1-46); 512-558=pnl2;
0=n/u
AI765
x
No-Units
0
55004
kWh Logical Circuit 1
Real Energy - Circuit 1
AI766
x
kWh
1
10101/10102
kWh Logical Circuit 2
Real Energy - Circuit 2
AI767
x
kWh
1
11101/11102
kWh Logical Circuit 3
Real Energy - Circuit 3
AI768
x
kWh
1
12101/12102
kWh Logical Circuit 4
Real Energy - Circuit 4
AI769
x
kWh
1
13101/13102
kWh Logical Circuit 5
Real Energy - Circuit 5
AI770
x
kWh
1
14101/14102
kWh Logical Circuit 6
Real Energy - Circuit 6
AI771
x
kWh
1
15101/15102
kWh Logical Circuit 7
Real Energy - Circuit 7
AI772
x
kWh
1
16101/16102
kWh Logical Circuit 8
Real Energy - Circuit 8
AI773
x
kWh
1
17101/17102
kWh Logical Circuit 9
Real Energy - Circuit 9
AI774
x
kWh
1
18101/18102
kWh Logical Circuit 10
Real Energy - Circuit 10
AI775
x
kWh
1
19101/19102
kWh Logical Circuit 11
Real Energy - Circuit 11
AI776
x
kWh
1
20101/20102
kWh Logical Circuit 12
Real Energy - Circuit 12
AI777
x
kWh
1
21101/21102
kWh Logical Circuit 13
Real Energy - Circuit 13
AI778
x
kWh
1
22101/22102
kWh Logical Circuit 14
Real Energy - Circuit 14
AI779
x
kWh
1
23101/23102
kWh Logical Circuit 15
Real Energy - Circuit 15
AI780
x
kWh
1
24101/24102
kWh Logical Circuit 16
Real Energy - Circuit 16
AI781
x
kWh
1
25101/25102
kWh Logical Circuit 17
Real Energy - Circuit 17
AI782
x
kWh
1
26101/26102
kWh Logical Circuit 18
Real Energy - Circuit 18
AI783
x
kWh
1
27101/27102
kWh Logical Circuit 19
Real Energy - Circuit 19
AI784
x
kWh
1
28101/28102
kWh Logical Circuit 20
Real Energy - Circuit 20
AI785
x
kWh
1
29101/29102
kWh Logical Circuit 21
Real Energy - Circuit 21
AI786
x
kWh
1
30101/30102
kWh Logical Circuit 22
Real Energy - Circuit 22
AI787
x
kWh
1
31101/31102
kWh Logical Circuit 23
Real Energy - Circuit 23
AI788
x
kWh
1
32101/32102
kWh Logical Circuit 24
Real Energy - Circuit 24
AI789
x
kWh
1
33101/33102
kWh Logical Circuit 25
Real Energy - Circuit 25
AI790
x
kWh
1
34101/34102
kWh Logical Circuit 26
Real Energy - Circuit 26
AI791
x
kWh
1
35101/35102
kWh Logical Circuit 27
Real Energy - Circuit 27
AI792
x
kWh
1
36101/36102
ZL0135-0A
Description
Page 74 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 41: Phase 3 - Panel & Chan
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kWh Logical Circuit 28
Real Energy - Circuit 28
AI793
x
kWh
1
37101/37102
kWh Logical Circuit 29
Real Energy - Circuit 29
AI794
x
kWh
1
38101/38102
kWh Logical Circuit 30
Real Energy - Circuit 30
AI795
x
kWh
1
39101/39102
kWh Logical Circuit 31
Real Energy - Circuit 31
AI796
x
kWh
1
40101/40102
kWh Logical Circuit 32
Real Energy - Circuit 32
AI797
x
kWh
1
41101/41102
kWh Logical Circuit 33
Real Energy - Circuit 33
AI798
x
kWh
1
42101/42102
kWh Logical Circuit 34
Real Energy - Circuit 34
AI799
x
kWh
1
43101/43102
kWh Logical Circuit 35
Real Energy - Circuit 35
AI800
x
kWh
1
44101/44102
kWh Logical Circuit 36
Real Energy - Circuit 36
AI801
x
kWh
1
45101/45102
kWh Logical Circuit 37
Real Energy - Circuit 37
AI802
x
kWh
1
46101/46102
kWh Logical Circuit 38
Real Energy - Circuit 38
AI803
x
kWh
1
47101/47102
kWh Logical Circuit 39
Real Energy - Circuit 39
AI804
x
kWh
1
48101/48102
kWh Logical Circuit 40
Real Energy - Circuit 40
AI805
x
kWh
1
49101/49102
kWh Logical Circuit 41
Real Energy - Circuit 41
AI806
x
kWh
1
50101/50102
kWh Logical Circuit 42
Real Energy - Circuit 42
AI807
x
kWh
1
51101/51102
kWh Logical Circuit 43
Real Energy - Circuit 43
AI808
x
kWh
1
52101/52102
kWh Logical Circuit 44
Real Energy - Circuit 44
AI809
x
kWh
1
53101/53102
kWh Logical Circuit 45
Real Energy - Circuit 45
AI810
x
kWh
1
54101/54102
kWh Logical Circuit 46
Real Energy - Circuit 46
AI811
x
kWh
1
55101/55102
kW Logical Circuit 1
Instantaneous Real Power - Circuit 1
AI812
x
kW
1
10109/10110
kW Logical Circuit 2
Instantaneous Real Power - Circuit 2
AI813
x
kW
1
11109/11110
kW Logical Circuit 3
Instantaneous Real Power - Circuit 3
AI814
x
kW
1
12109/12110
kW Logical Circuit 4
Instantaneous Real Power - Circuit 4
AI815
x
kW
1
13109/13110
kW Logical Circuit 5
Instantaneous Real Power - Circuit 5
AI816
x
kW
1
14109/14110
kW Logical Circuit 6
Instantaneous Real Power - Circuit 6
AI817
x
kW
1
15109/15110
kW Logical Circuit 7
Instantaneous Real Power - Circuit 7
AI818
x
kW
1
16109/16110
kW Logical Circuit 8
Instantaneous Real Power - Circuit 8
AI819
x
kW
1
17109/17110
kW Logical Circuit 9
Instantaneous Real Power - Circuit 9
AI820
x
kW
1
18109/18110
kW Logical Circuit 10
Instantaneous Real Power - Circuit 10
AI821
x
kW
1
19109/19110
kW Logical Circuit 11
Instantaneous Real Power - Circuit 11
AI822
x
kW
1
20109/20110
kW Logical Circuit 12
Instantaneous Real Power - Circuit 12
AI823
x
kW
1
21109/21110
kW Logical Circuit 13
Instantaneous Real Power - Circuit 13
AI824
x
kW
1
22109/22110
kW Logical Circuit 14
Instantaneous Real Power - Circuit 14
AI825
x
kW
1
23109/23110
kW Logical Circuit 15
Instantaneous Real Power - Circuit 15
AI826
x
kW
1
24109/24110
kW Logical Circuit 16
Instantaneous Real Power - Circuit 16
AI827
x
kW
1
25109/25110
kW Logical Circuit 17
Instantaneous Real Power - Circuit 17
AI828
x
kW
1
26109/26110
ZL0135-0A
Description
Page 75 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kW Logical Circuit 18
Instantaneous Real Power - Circuit 18
AI829
x
kW
1
27109/27110
kW Logical Circuit 19
Instantaneous Real Power - Circuit 19
AI830
x
kW
1
28109/28110
kW Logical Circuit 20
Instantaneous Real Power - Circuit 20
AI831
x
kW
1
29109/29110
kW Logical Circuit 21
Instantaneous Real Power - Circuit 21
AI832
x
kW
1
30109/30110
kW Logical Circuit 22
Instantaneous Real Power - Circuit 22
AI833
x
kW
1
31109/31110
kW Logical Circuit 23
Instantaneous Real Power - Circuit 23
AI834
x
kW
1
32109/32110
kW Logical Circuit 24
Instantaneous Real Power - Circuit 24
AI835
x
kW
1
33109/33110
kW Logical Circuit 25
Instantaneous Real Power - Circuit 25
AI836
x
kW
1
34109/34110
kW Logical Circuit 26
Instantaneous Real Power - Circuit 26
AI837
x
kW
1
35109/35110
kW Logical Circuit 27
Instantaneous Real Power - Circuit 27
AI838
x
kW
1
36109/36110
kW Logical Circuit 28
Instantaneous Real Power - Circuit 28
AI839
x
kW
1
37109/37110
kW Logical Circuit 29
Instantaneous Real Power - Circuit 29
AI840
x
kW
1
38109/38110
kW Logical Circuit 30
Instantaneous Real Power - Circuit 30
AI841
x
kW
1
39109/39110
kW Logical Circuit 31
Instantaneous Real Power - Circuit 31
AI842
x
kW
1
40109/40110
kW Logical Circuit 32
Instantaneous Real Power - Circuit 32
AI843
x
kW
1
41109/41110
kW Logical Circuit 33
Instantaneous Real Power - Circuit 33
AI844
x
kW
1
42109/42110
kW Logical Circuit 34
Instantaneous Real Power - Circuit 34
AI845
x
kW
1
43109/43110
kW Logical Circuit 35
Instantaneous Real Power - Circuit 35
AI846
x
kW
1
44109/44110
kW Logical Circuit 36
Instantaneous Real Power - Circuit 36
AI847
x
kW
1
45109/45110
kW Logical Circuit 37
Instantaneous Real Power - Circuit 37
AI848
x
kW
1
46109/46110
kW Logical Circuit 38
Instantaneous Real Power - Circuit 38
AI849
x
kW
1
47109/47110
kW Logical Circuit 39
Instantaneous Real Power - Circuit 39
AI850
x
kW
1
48109/48110
kW Logical Circuit 40
Instantaneous Real Power - Circuit 40
AI851
x
kW
1
49109/49110
kW Logical Circuit 41
Instantaneous Real Power - Circuit 41
AI852
x
kW
1
50109/50110
kW Logical Circuit 42
Instantaneous Real Power - Circuit 42
AI853
x
kW
1
51109/51110
kW Logical Circuit 43
Instantaneous Real Power - Circuit 43
AI854
x
kW
1
52109/52110
kW Logical Circuit 44
Instantaneous Real Power - Circuit 44
AI855
x
kW
1
53109/53110
kW Logical Circuit 45
Instantaneous Real Power - Circuit 45
AI856
x
kW
1
54109/54110
kW Logical Circuit 46
Instantaneous Real Power - Circuit 46
AI857
x
kW
1
55109/55110
kVA Logical Circuit 1
Instantaneous Apparent Power - Ckt 1
AI858
x
kVA
1
10113/10114
kVA Logical Circuit 2
Instantaneous Apparent Power - Ckt 2
AI859
x
kVA
1
11113/11114
kVA Logical Circuit 3
Instantaneous Apparent Power - Ckt 3
AI860
x
kVA
1
12113/12114
kVA Logical Circuit 4
Instantaneous Apparent Power - Ckt 4
AI861
x
kVA
1
13113/13114
kVA Logical Circuit 5
Instantaneous Apparent Power - Ckt 5
AI862
x
kVA
1
14113/14114
kVA Logical Circuit 6
Instantaneous Apparent Power - Ckt 6
AI863
x
kVA
1
15113/15114
kVA Logical Circuit 7
Instantaneous Apparent Power - Ckt 7
AI864
x
kVA
1
16113/16114
kVA Logical Circuit 8
Instantaneous Apparent Power - Ckt 8
AI865
x
kVA
1
17113/17114
ZL0135-0A
Description
Page 76 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kVA Logical Circuit 9
Instantaneous Apparent Power - Ckt 9
AI866
x
kVA
1
18113/18114
kVA Logical Circuit 10
Instantaneous Apparent Power - Ckt 10
AI867
x
kVA
1
19113/19114
kVA Logical Circuit 11
Instantaneous Apparent Power - Ckt 11
AI868
x
kVA
1
20113/20114
kVA Logical Circuit 12
Instantaneous Apparent Power - Ckt 12
AI869
x
kVA
1
21113/21114
kVA Logical Circuit 13
Instantaneous Apparent Power - Ckt 13
AI870
x
kVA
1
22113/22114
kVA Logical Circuit 14
Instantaneous Apparent Power - Ckt 14
AI871
x
kVA
1
23113/23114
kVA Logical Circuit 15
Instantaneous Apparent Power - Ckt 15
AI872
x
kVA
1
24113/24114
kVA Logical Circuit 16
Instantaneous Apparent Power - Ckt 16
AI873
x
kVA
1
25113/25114
kVA Logical Circuit 17
Instantaneous Apparent Power - Ckt 17
AI874
x
kVA
1
26113/26114
kVA Logical Circuit 18
Instantaneous Apparent Power - Ckt 18
AI875
x
kVA
1
27113/27114
kVA Logical Circuit 19
Instantaneous Apparent Power - Ckt 19
AI876
x
kVA
1
28113/28114
kVA Logical Circuit 20
Instantaneous Apparent Power - Ckt 20
AI877
x
kVA
1
29113/29114
kVA Logical Circuit 21
Instantaneous Apparent Power - Ckt 21
AI878
x
kVA
1
30113/30114
kVA Logical Circuit 22
Instantaneous Apparent Power - Ckt 22
AI879
x
kVA
1
31113/31114
kVA Logical Circuit 23
Instantaneous Apparent Power - Ckt 23
AI880
x
kVA
1
32113/32114
kVA Logical Circuit 24
Instantaneous Apparent Power - Ckt 24
AI881
x
kVA
1
33113/33114
kVA Logical Circuit 25
Instantaneous Apparent Power - Ckt 25
AI882
x
kVA
1
34113/34114
kVA Logical Circuit 26
Instantaneous Apparent Power - Ckt 26
AI883
x
kVA
1
35113/35114
kVA Logical Circuit 27
Instantaneous Apparent Power - Ckt 27
AI884
x
kVA
1
36113/36114
kVA Logical Circuit 28
Instantaneous Apparent Power - Ckt 28
AI885
x
kVA
1
37113/37114
kVA Logical Circuit 29
Instantaneous Apparent Power - Ckt 29
AI886
x
kVA
1
38113/38114
kVA Logical Circuit 30
Instantaneous Apparent Power - Ckt 30
AI887
x
kVA
1
39113/39114
kVA Logical Circuit 31
Instantaneous Apparent Power - Ckt 31
AI888
x
kVA
1
40113/40114
kVA Logical Circuit 32
Instantaneous Apparent Power - Ckt 32
AI889
x
kVA
1
41113/41114
kVA Logical Circuit 33
Instantaneous Apparent Power - Ckt 33
AI890
x
kVA
1
42113/42114
kVA Logical Circuit 34
Instantaneous Apparent Power - Ckt 34
AI891
x
kVA
1
43113/43114
kVA Logical Circuit 35
Instantaneous Apparent Power - Ckt 35
AI892
x
kVA
1
44113/44114
kVA Logical Circuit 36
Instantaneous Apparent Power - Ckt 36
AI893
x
kVA
1
45113/45114
kVA Logical Circuit 37
Instantaneous Apparent Power - Ckt 37
AI894
x
kVA
1
46113/46114
kVA Logical Circuit 38
Instantaneous Apparent Power - Ckt 38
AI895
x
kVA
1
47113/47114
kVA Logical Circuit 39
Instantaneous Apparent Power - Ckt 39
AI896
x
kVA
1
48113/48114
kVA Logical Circuit 40
Instantaneous Apparent Power - Ckt 40
AI897
x
kVA
1
49113/49114
kVA Logical Circuit 41
Instantaneous Apparent Power - Ckt 41
AI898
x
kVA
1
50113/50114
kVA Logical Circuit 42
Instantaneous Apparent Power - Ckt 42
AI899
x
kVA
1
51113/51114
kVA Logical Circuit 43
Instantaneous Apparent Power - Ckt 43
AI900
x
kVA
1
52113/52114
kVA Logical Circuit 44
Instantaneous Apparent Power - Ckt 44
AI901
x
kVA
1
53113/53114
kVA Logical Circuit 45
Instantaneous Apparent Power - Ckt 45
AI902
x
kVA
1
54113/54114
ZL0135-0A
Description
Page 77 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kVA Logical Circuit 46
Instantaneous Apparent Power - Ckt 46
AI903
x
kVA
1
55113/55114
Power Factor Logical Circuit 1
Instantaneous Power Factor - Ckt 1
AI904
x
No-Units
5
10115/10116
Power Factor Logical Circuit 2
Instantaneous Power Factor - Ckt 2
AI905
x
No-Units
5
11115/11116
Power Factor Logical Circuit 3
Instantaneous Power Factor - Ckt 3
AI906
x
No-Units
5
12115/12116
Power Factor Logical Circuit 4
Instantaneous Power Factor - Ckt 4
AI907
x
No-Units
5
13115/13116
Power Factor Logical Circuit 5
Instantaneous Power Factor - Ckt 5
AI908
x
No-Units
5
14115/14116
Power Factor Logical Circuit 6
Instantaneous Power Factor - Ckt 6
AI909
x
No-Units
5
15115/15116
Power Factor Logical Circuit 7
Instantaneous Power Factor - Ckt 7
AI910
x
No-Units
5
16115/16116
Power Factor Logical Circuit 8
Instantaneous Power Factor - Ckt 8
AI911
x
No-Units
5
17115/17116
Power Factor Logical Circuit 9
Instantaneous Power Factor - Ckt 9
AI912
x
No-Units
5
18115/18116
Power Factor Logical Circuit 10
Instantaneous Power Factor - Ckt 10
AI913
x
No-Units
5
19115/19116
Power Factor Logical Circuit 11
Instantaneous Power Factor - Ckt 11
AI914
x
No-Units
5
20115/20116
Power Factor Logical Circuit 12
Instantaneous Power Factor - Ckt 12
AI915
x
No-Units
5
21115/21116
Power Factor Logical Circuit 13
Instantaneous Power Factor - Ckt 13
AI916
x
No-Units
5
22115/22116
Power Factor Logical Circuit 14
Instantaneous Power Factor - Ckt 14
AI917
x
No-Units
5
23115/23116
Power Factor Logical Circuit 15
Instantaneous Power Factor - Ckt 15
AI918
x
No-Units
5
24115/24116
Power Factor Logical Circuit 16
Instantaneous Power Factor - Ckt 16
AI919
x
No-Units
5
25115/25116
Power Factor Logical Circuit 17
Instantaneous Power Factor - Ckt 17
AI920
x
No-Units
5
26115/26116
Power Factor Logical Circuit 18
Instantaneous Power Factor - Ckt 18
AI921
x
No-Units
5
27115/27116
Power Factor Logical Circuit 19
Instantaneous Power Factor - Ckt 19
AI922
x
No-Units
5
28115/28116
Power Factor Logical Circuit 20
Instantaneous Power Factor - Ckt 20
AI923
x
No-Units
5
29115/29116
Power Factor Logical Circuit 21
Instantaneous Power Factor - Ckt 21
AI924
x
No-Units
5
30115/30116
Power Factor Logical Circuit 22
Instantaneous Power Factor - Ckt 22
AI925
x
No-Units
5
31115/31116
Power Factor Logical Circuit 23
Instantaneous Power Factor - Ckt 23
AI926
x
No-Units
5
32115/32116
Power Factor Logical Circuit 24
Instantaneous Power Factor - Ckt 24
AI927
x
No-Units
5
33115/33116
Power Factor Logical Circuit 25
Instantaneous Power Factor - Ckt 25
AI928
x
No-Units
5
34115/34116
Power Factor Logical Circuit 26
Instantaneous Power Factor - Ckt 26
AI929
x
No-Units
5
35115/35116
Power Factor Logical Circuit 27
Instantaneous Power Factor - Ckt 27
AI930
x
No-Units
5
36115/36116
Power Factor Logical Circuit 28
Instantaneous Power Factor - Ckt 28
AI931
x
No-Units
5
37115/37116
Power Factor Logical Circuit 29
Instantaneous Power Factor - Ckt 29
AI932
x
No-Units
5
38115/38116
Power Factor Logical Circuit 30
Instantaneous Power Factor - Ckt 30
AI933
x
No-Units
5
39115/39116
Power Factor Logical Circuit 31
Instantaneous Power Factor - Ckt 31
AI934
x
No-Units
5
40115/40116
Power Factor Logical Circuit 32
Instantaneous Power Factor - Ckt 32
AI935
x
No-Units
5
41115/41116
Power Factor Logical Circuit 33
Instantaneous Power Factor - Ckt 33
AI936
x
No-Units
5
42115/42116
Power Factor Logical Circuit 34
Instantaneous Power Factor - Ckt 34
AI937
x
No-Units
5
43115/43116
Power Factor Logical Circuit 35
Instantaneous Power Factor - Ckt 35
AI938
x
No-Units
5
44115/44116
ZL0135-0A
Description
Page 78 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Power Factor Logical Circuit 36
Instantaneous Power Factor - Ckt 36
AI939
x
No-Units
5
45115/45116
Power Factor Logical Circuit 37
Instantaneous Power Factor - Ckt 37
AI940
x
No-Units
5
46115/46116
Power Factor Logical Circuit 38
Instantaneous Power Factor - Ckt 38
AI941
x
No-Units
5
47115/47116
Power Factor Logical Circuit 39
Instantaneous Power Factor - Ckt 39
AI942
x
No-Units
5
48115/48116
Power Factor Logical Circuit 40
Instantaneous Power Factor - Ckt 40
AI943
x
No-Units
5
49115/49116
Power Factor Logical Circuit 41
Instantaneous Power Factor - Ckt 41
AI944
x
No-Units
5
50115/50116
Power Factor Logical Circuit 42
Instantaneous Power Factor - Ckt 42
AI945
x
No-Units
5
51115/51116
Power Factor Logical Circuit 43
Instantaneous Power Factor - Ckt 43
AI946
x
No-Units
5
52115/52116
Power Factor Logical Circuit 44
Instantaneous Power Factor - Ckt 44
AI947
x
No-Units
5
53115/53116
Power Factor Logical Circuit 45
Instantaneous Power Factor - Ckt 45
AI948
x
No-Units
5
54115/54116
Power Factor Logical Circuit 46
Instantaneous Power Factor - Ckt 46
AI949
x
No-Units
5
55115/55116
Amps (Average) Logical Circuit 1
Instantaneous Current - Circuit 1
AI950
x
Amperes
5
10119/10120
Amps (Average) Logical Circuit 2
Instantaneous Current - Circuit 2
AI951
x
Amperes
5
11119/11120
Amps (Average) Logical Circuit 3
Instantaneous Current - Circuit 3
AI952
x
Amperes
5
12119/12120
Amps (Average) Logical Circuit 4
Instantaneous Current - Circuit 4
AI953
x
Amperes
5
13119/13120
Amps (Average) Logical Circuit 5
Instantaneous Current - Circuit 5
AI954
x
Amperes
5
14119/14120
Amps (Average) Logical Circuit 6
Instantaneous Current - Circuit 6
AI955
x
Amperes
5
15119/15120
Amps (Average) Logical Circuit 7
Instantaneous Current - Circuit 7
AI956
x
Amperes
5
16119/16120
Amps (Average) Logical Circuit 8
Instantaneous Current - Circuit 8
AI957
x
Amperes
5
17119/17120
Amps (Average) Logical Circuit 9
Instantaneous Current - Circuit 9
AI958
x
Amperes
5
18119/18120
Amps (Average) Logical Circuit 10
Instantaneous Current - Circuit 10
AI959
x
Amperes
5
19119/19120
Amps (Average) Logical Circuit 11
Instantaneous Current - Circuit 11
AI960
x
Amperes
5
20119/20120
Amps (Average) Logical Circuit 12
Instantaneous Current - Circuit 12
AI961
x
Amperes
5
21119/21120
Amps (Average) Logical Circuit 13
Instantaneous Current - Circuit 13
AI962
x
Amperes
5
22119/22120
Amps (Average) Logical Circuit 14
Instantaneous Current - Circuit 14
AI963
x
Amperes
5
23119/23120
Amps (Average) Logical Circuit 15
Instantaneous Current - Circuit 15
AI964
x
Amperes
5
24119/24120
Amps (Average) Logical Circuit 16
Instantaneous Current - Circuit 16
AI965
x
Amperes
5
25119/25120
Amps (Average) Logical Circuit 17
Instantaneous Current - Circuit 17
AI966
x
Amperes
5
26119/26120
Amps (Average) Logical Circuit 18
Instantaneous Current - Circuit 18
AI967
x
Amperes
5
27119/27120
Amps (Average) Logical Circuit 19
Instantaneous Current - Circuit 19
AI968
x
Amperes
5
28119/28120
Amps (Average) Logical Circuit 20
Instantaneous Current - Circuit 20
AI969
x
Amperes
5
29119/29120
Amps (Average) Logical Circuit 21
Instantaneous Current - Circuit 21
AI970
x
Amperes
5
30119/30120
Amps (Average) Logical Circuit 22
Instantaneous Current - Circuit 22
AI971
x
Amperes
5
31119/31120
Amps (Average) Logical Circuit 23
Instantaneous Current - Circuit 23
AI972
x
Amperes
5
32119/32120
Amps (Average) Logical Circuit 24
Instantaneous Current - Circuit 24
AI973
x
Amperes
5
33119/33120
Amps (Average) Logical Circuit 25
Instantaneous Current - Circuit 25
AI974
x
Amperes
5
34119/34120
ZL0135-0A
Description
Page 79 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Amps (Average) Logical Circuit 26
Instantaneous Current - Circuit 26
AI975
x
Amperes
5
35119/35120
Amps (Average) Logical Circuit 27
Instantaneous Current - Circuit 27
AI976
x
Amperes
5
36119/36120
Amps (Average) Logical Circuit 28
Instantaneous Current - Circuit 28
AI977
x
Amperes
5
37119/37120
Amps (Average) Logical Circuit 29
Instantaneous Current - Circuit 29
AI978
x
Amperes
5
38119/38120
Amps (Average) Logical Circuit 30
Instantaneous Current - Circuit 30
AI979
x
Amperes
5
39119/39120
Amps (Average) Logical Circuit 31
Instantaneous Current - Circuit 31
AI980
x
Amperes
5
40119/40120
Amps (Average) Logical Circuit 32
Instantaneous Current - Circuit 32
AI981
x
Amperes
5
41119/41120
Amps (Average) Logical Circuit 33
Instantaneous Current - Circuit 33
AI982
x
Amperes
5
42119/42120
Amps (Average) Logical Circuit 34
Instantaneous Current - Circuit 34
AI983
x
Amperes
5
43119/43120
Amps (Average) Logical Circuit 35
Instantaneous Current - Circuit 35
AI984
x
Amperes
5
44119/44120
Amps (Average) Logical Circuit 36
Instantaneous Current - Circuit 36
AI985
x
Amperes
5
45119/45120
Amps (Average) Logical Circuit 37
Instantaneous Current - Circuit 37
AI986
x
Amperes
5
46119/46120
Amps (Average) Logical Circuit 38
Instantaneous Current - Circuit 38
AI987
x
Amperes
5
47119/47120
Amps (Average) Logical Circuit 39
Instantaneous Current - Circuit 39
AI988
x
Amperes
5
48119/48120
Amps (Average) Logical Circuit 40
Instantaneous Current - Circuit 40
AI989
x
Amperes
5
49119/49120
Amps (Average) Logical Circuit 41
Instantaneous Current - Circuit 41
AI990
x
Amperes
5
50119/50120
Amps (Average) Logical Circuit 42
Instantaneous Current - Circuit 42
AI991
x
Amperes
5
51119/51120
Amps (Average) Logical Circuit 43
Instantaneous Current - Circuit 43
AI992
x
Amperes
5
52119/52120
Amps (Average) Logical Circuit 44
Instantaneous Current - Circuit 44
AI993
x
Amperes
5
53119/53120
Amps (Average) Logical Circuit 45
Instantaneous Current - Circuit 45
AI994
x
Amperes
5
54119/54120
Amps (Average) Logical Circuit 46
Instantaneous Current - Circuit 46
AI995
x
Amperes
5
55119/55120
kW Present Demand Logical Circuit 1
Present Real Power Demand - Ckt 1
AI996
x
kW
1
10121/10122
kW Present Demand Logical Circuit 2
Present Real Power Demand - Ckt 2
AI997
x
kW
1
11121/11122
kW Present Demand Logical Circuit 3
Present Real Power Demand - Ckt 3
AI998
x
kW
1
12121/12122
kW Present Demand Logical Circuit 4
Present Real Power Demand - Ckt 4
AI999
x
kW
1
13121/13122
kW Present Demand Logical Circuit 5
Present Real Power Demand - Ckt 5
AI1000
x
kW
1
14121/14122
kW Present Demand Logical Circuit 6
Present Real Power Demand - Ckt 6
AI1001
x
kW
1
15121/15122
kW Present Demand Logical Circuit 7
Present Real Power Demand - Ckt 7
AI1002
x
kW
1
16121/16122
kW Present Demand Logical Circuit 8
Present Real Power Demand - Ckt 8
AI1003
x
kW
1
17121/17122
kW Present Demand Logical Circuit 9
Present Real Power Demand - Ckt 9
AI1004
x
kW
1
18121/18122
kW Present Demand Logical Circuit 10
Present Real Power Demand - Ckt 10
AI1005
x
kW
1
19121/19122
kW Present Demand Logical Circuit 11
Present Real Power Demand - Ckt 11
AI1006
x
kW
1
20121/20122
kW Present Demand Logical Circuit 12
Present Real Power Demand - Ckt 12
AI1007
x
kW
1
21121/21122
kW Present Demand Logical Circuit 13
Present Real Power Demand - Ckt 13
AI1008
x
kW
1
22121/22122
kW Present Demand Logical Circuit 14
Present Real Power Demand - Ckt 14
AI1009
x
kW
1
23121/23122
kW Present Demand Logical Circuit 15
Present Real Power Demand - Ckt 15
AI1010
x
kW
1
24121/24122
kW Present Demand Logical Circuit 16
Present Real Power Demand - Ckt 16
AI1011
x
kW
1
25121/25122
ZL0135-0A
Description
Page 80 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kW Present Demand Logical Circuit 17
Present Real Power Demand - Ckt 17
AI1012
x
kW
1
26121/26122
kW Present Demand Logical Circuit 18
Present Real Power Demand - Ckt 18
AI1013
x
kW
1
27121/27122
kW Present Demand Logical Circuit 19
Present Real Power Demand - Ckt 19
AI1014
x
kW
1
28121/28122
kW Present Demand Logical Circuit 20
Present Real Power Demand - Ckt 20
AI1015
x
kW
1
29121/29122
kW Present Demand Logical Circuit 21
Present Real Power Demand - Ckt 21
AI1016
x
kW
1
30121/30122
kW Present Demand Logical Circuit 22
Present Real Power Demand - Ckt 22
AI1017
x
kW
1
31121/31122
kW Present Demand Logical Circuit 23
Present Real Power Demand - Ckt 23
AI1018
x
kW
1
32121/32122
kW Present Demand Logical Circuit 24
Present Real Power Demand - Ckt 24
AI1019
x
kW
1
33121/33122
kW Present Demand Logical Circuit 25
Present Real Power Demand - Ckt 25
AI1020
x
kW
1
34121/34122
kW Present Demand Logical Circuit 26
Present Real Power Demand - Ckt 26
AI1021
x
kW
1
35121/35122
kW Present Demand Logical Circuit 27
Present Real Power Demand - Ckt 27
AI1022
x
kW
1
36121/36122
kW Present Demand Logical Circuit 28
Present Real Power Demand - Ckt 28
AI1023
x
kW
1
37121/37122
kW Present Demand Logical Circuit 29
Present Real Power Demand - Ckt 29
AI1024
x
kW
1
38121/38122
kW Present Demand Logical Circuit 30
Present Real Power Demand - Ckt 30
AI1025
x
kW
1
39121/39122
kW Present Demand Logical Circuit 31
Present Real Power Demand - Ckt 31
AI1026
x
kW
1
40121/40122
kW Present Demand Logical Circuit 32
Present Real Power Demand - Ckt 32
AI1027
x
kW
1
41121/41122
kW Present Demand Logical Circuit 33
Present Real Power Demand - Ckt 33
AI1028
x
kW
1
42121/42122
kW Present Demand Logical Circuit 34
Present Real Power Demand - Ckt 34
AI1029
x
kW
1
43121/43122
kW Present Demand Logical Circuit 35
Present Real Power Demand - Ckt 35
AI1030
x
kW
1
44121/44122
kW Present Demand Logical Circuit 36
Present Real Power Demand - Ckt 36
AI1031
x
kW
1
45121/45122
kW Present Demand Logical Circuit 37
Present Real Power Demand - Ckt 37
AI1032
x
kW
1
46121/46122
kW Present Demand Logical Circuit 38
Present Real Power Demand - Ckt 38
AI1033
x
kW
1
47121/47122
kW Present Demand Logical Circuit 39
Present Real Power Demand - Ckt 39
AI1034
x
kW
1
48121/48122
kW Present Demand Logical Circuit 40
Present Real Power Demand - Ckt 40
AI1035
x
kW
1
49121/49122
kW Present Demand Logical Circuit 41
Present Real Power Demand - Ckt 41
AI1036
x
kW
1
50121/50122
kW Present Demand Logical Circuit 42
Present Real Power Demand - Ckt 42
AI1037
x
kW
1
51121/51122
kW Present Demand Logical Circuit 43
Present Real Power Demand - Ckt 43
AI1038
x
kW
1
52121/52122
kW Present Demand Logical Circuit 44
Present Real Power Demand - Ckt 44
AI1039
x
kW
1
53121/53122
kW Present Demand Logical Circuit 45
Present Real Power Demand - Ckt 45
AI1040
x
kW
1
54121/54122
kW Present Demand Logical Circuit 46
Present Real Power Demand - Ckt 46
AI1041
x
kW
1
55121/55122
kW Max Demand Logical Circuit 1
Max Real Power Demand - Circuit 1
AI1042
x
kW
1
10129/10130
kW Max Demand Logical Circuit 2
Max Real Power Demand - Circuit 2
AI1043
x
kW
1
11129/11130
kW Max Demand Logical Circuit 3
Max Real Power Demand - Circuit 3
AI1044
x
kW
1
12129/12130
kW Max Demand Logical Circuit 4
Max Real Power Demand - Circuit 4
AI1045
x
kW
1
13129/13130
kW Max Demand Logical Circuit 5
Max Real Power Demand - Circuit 5
AI1046
x
kW
1
14129/14130
kW Max Demand Logical Circuit 6
Max Real Power Demand - Circuit 6
AI1047
x
kW
1
15129/15130
kW Max Demand Logical Circuit 7
Max Real Power Demand - Circuit 7
AI1048
x
kW
1
16129/16130
ZL0135-0A
Description
Page 81 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]is.com0615
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kW Max Demand Logical Circuit 8
Max Real Power Demand - Circuit 8
AI1049
x
kW
1
17129/17130
kW Max Demand Logical Circuit 9
Max Real Power Demand - Circuit 9
AI1050
x
kW
1
18129/18130
kW Max Demand Logical Circuit 10
Max Real Power Demand - Circuit 10
AI1051
x
kW
1
19129/19130
kW Max Demand Logical Circuit 11
Max Real Power Demand - Circuit 11
AI1052
x
kW
1
20129/20130
kW Max Demand Logical Circuit 12
Max Real Power Demand - Circuit 12
AI1053
x
kW
1
21129/21130
kW Max Demand Logical Circuit 13
Max Real Power Demand - Circuit 13
AI1054
x
kW
1
22129/22130
kW Max Demand Logical Circuit 14
Max Real Power Demand - Circuit 14
AI1055
x
kW
1
23129/23130
kW Max Demand Logical Circuit 15
Max Real Power Demand - Circuit 15
AI1056
x
kW
1
24129/24130
kW Max Demand Logical Circuit 16
Max Real Power Demand - Circuit 16
AI1057
x
kW
1
25129/25130
kW Max Demand Logical Circuit 17
Max Real Power Demand - Circuit 17
AI1058
x
kW
1
26129/26130
kW Max Demand Logical Circuit 18
Max Real Power Demand - Circuit 18
AI1059
x
kW
1
27129/27130
kW Max Demand Logical Circuit 19
Max Real Power Demand - Circuit 19
AI1060
x
kW
1
28129/28130
kW Max Demand Logical Circuit 20
Max Real Power Demand - Circuit 20
AI1061
x
kW
1
29129/29130
kW Max Demand Logical Circuit 21
Max Real Power Demand - Circuit 21
AI1062
x
kW
1
30129/30130
kW Max Demand Logical Circuit 22
Max Real Power Demand - Circuit 22
AI1063
x
kW
1
31129/31130
kW Max Demand Logical Circuit 23
Max Real Power Demand - Circuit 23
AI1064
x
kW
1
32129/32130
kW Max Demand Logical Circuit 24
Max Real Power Demand - Circuit 24
AI1065
x
kW
1
33129/33130
kW Max Demand Logical Circuit 25
Max Real Power Demand - Circuit 25
AI1066
x
kW
1
34129/34130
kW Max Demand Logical Circuit 26
Max Real Power Demand - Circuit 26
AI1067
x
kW
1
35129/35130
kW Max Demand Logical Circuit 27
Max Real Power Demand - Circuit 27
AI1068
x
kW
1
36129/36130
kW Max Demand Logical Circuit 28
Max Real Power Demand - Circuit 28
AI1069
x
kW
1
37129/37130
kW Max Demand Logical Circuit 29
Max Real Power Demand - Circuit 29
AI1070
x
kW
1
38129/38130
kW Max Demand Logical Circuit 30
Max Real Power Demand - Circuit 30
AI1071
x
kW
1
39129/39130
kW Max Demand Logical Circuit 31
Max Real Power Demand - Circuit 31
AI1072
x
kW
1
40129/40130
kW Max Demand Logical Circuit 32
Max Real Power Demand - Circuit 32
AI1073
x
kW
1
41129/41130
kW Max Demand Logical Circuit 33
Max Real Power Demand - Circuit 33
AI1074
x
kW
1
42129/42130
kW Max Demand Logical Circuit 34
Max Real Power Demand - Circuit 34
AI1075
x
kW
1
43129/43130
kW Max Demand Logical Circuit 35
Max Real Power Demand - Circuit 35
AI1076
x
kW
1
44129/44130
kW Max Demand Logical Circuit 36
Max Real Power Demand - Circuit 36
AI1077
x
kW
1
45129/45130
kW Max Demand Logical Circuit 37
Max Real Power Demand - Circuit 37
AI1078
x
kW
1
46129/46130
kW Max Demand Logical Circuit 38
Max Real Power Demand - Circuit 38
AI1079
x
kW
1
47129/47130
kW Max Demand Logical Circuit 39
Max Real Power Demand - Circuit 39
AI1080
x
kW
1
48129/48130
kW Max Demand Logical Circuit 40
Max Real Power Demand - Circuit 40
AI1081
x
kW
1
49129/49130
kW Max Demand Logical Circuit 41
Max Real Power Demand - Circuit 41
AI1082
x
kW
1
50129/50130
kW Max Demand Logical Circuit 42
Max Real Power Demand - Circuit 42
AI1083
x
kW
1
51129/51130
kW Max Demand Logical Circuit 43
Max Real Power Demand - Circuit 43
AI1084
x
kW
1
52129/52130
ZL0135-0A
Description
Page 82 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kW Max Demand Logical Circuit 44
Max Real Power Demand - Circuit 44
AI1085
x
kW
1
53129/53130
kW Max Demand Logical Circuit 45
Max Real Power Demand - Circuit 45
AI1086
x
kW
1
54129/54130
kW Max Demand Logical Circuit 46
Max Real Power Demand - Circuit 46
AI1087
x
kW
1
55129/55130
kW Max Logical Circuit 1
Max Instantaneous Real Power - Ckt 1
AI1088
x
kW
1
10137/10138
kW Max Logical Circuit 2
Max Instantaneous Real Power - Ckt 2
AI1089
x
kW
1
11137/11138
kW Max Logical Circuit 3
Max Instantaneous Real Power - Ckt 3
AI1090
x
kW
1
12137/12138
kW Max Logical Circuit 4
Max Instantaneous Real Power - Ckt 4
AI1091
x
kW
1
13137/13138
kW Max Logical Circuit 5
Max Instantaneous Real Power - Ckt 5
AI1092
x
kW
1
14137/14138
kW Max Logical Circuit 6
Max Instantaneous Real Power - Ckt 6
AI1093
x
kW
1
15137/15138
kW Max Logical Circuit 7
Max Instantaneous Real Power - Ckt 7
AI1094
x
kW
1
16137/16138
kW Max Logical Circuit 8
Max Instantaneous Real Power - Ckt 8
AI1095
x
kW
1
17137/17138
kW Max Logical Circuit 9
Max Instantaneous Real Power - Ckt 9
AI1096
x
kW
1
18137/18138
kW Max Logical Circuit 10
Max Instantaneous Real Power - Ckt 10
AI1097
x
kW
1
19137/19138
kW Max Logical Circuit 11
Max Instantaneous Real Power - Ckt 11
AI1098
x
kW
1
20137/20138
kW Max Logical Circuit 12
Max Instantaneous Real Power - Ckt 12
AI1099
x
kW
1
21137/21138
kW Max Logical Circuit 13
Max Instantaneous Real Power - Ckt 13
AI1100
x
kW
1
22137/22138
kW Max Logical Circuit 14
Max Instantaneous Real Power - Ckt 14
AI1101
x
kW
1
23137/23138
kW Max Logical Circuit 15
Max Instantaneous Real Power - Ckt 15
AI1102
x
kW
1
24137/24138
kW Max Logical Circuit 16
Max Instantaneous Real Power - Ckt 16
AI1103
x
kW
1
25137/25138
kW Max Logical Circuit 17
Max Instantaneous Real Power - Ckt 17
AI1104
x
kW
1
26137/26138
kW Max Logical Circuit 18
Max Instantaneous Real Power - Ckt 18
AI1105
x
kW
1
27137/27138
kW Max Logical Circuit 19
Max Instantaneous Real Power - Ckt 19
AI1106
x
kW
1
28137/28138
kW Max Logical Circuit 20
Max Instantaneous Real Power - Ckt 20
AI1107
x
kW
1
29137/29138
kW Max Logical Circuit 21
Max Instantaneous Real Power - Ckt 21
AI1108
x
kW
1
30137/30138
kW Max Logical Circuit 22
Max Instantaneous Real Power - Ckt 22
AI1109
x
kW
1
31137/31138
kW Max Logical Circuit 23
Max Instantaneous Real Power - Ckt 23
AI1110
x
kW
1
32137/32138
kW Max Logical Circuit 24
Max Instantaneous Real Power - Ckt 24
AI1111
x
kW
1
33137/33138
kW Max Logical Circuit 25
Max Instantaneous Real Power - Ckt 25
AI1112
x
kW
1
34137/34138
kW Max Logical Circuit 26
Max Instantaneous Real Power - Ckt 26
AI1113
x
kW
1
35137/35138
kW Max Logical Circuit 27
Max Instantaneous Real Power - Ckt 27
AI1114
x
kW
1
36137/36138
kW Max Logical Circuit 28
Max Instantaneous Real Power - Ckt 28
AI1115
x
kW
1
37137/37138
kW Max Logical Circuit 29
Max Instantaneous Real Power - Ckt 29
AI1116
x
kW
1
38137/38138
kW Max Logical Circuit 30
Max Instantaneous Real Power - Ckt 30
AI1117
x
kW
1
39137/39138
kW Max Logical Circuit 31
Max Instantaneous Real Power - Ckt 31
AI1118
x
kW
1
40137/40138
kW Max Logical Circuit 32
Max Instantaneous Real Power - Ckt 32
AI1119
x
kW
1
41137/41138
kW Max Logical Circuit 33
Max Instantaneous Real Power - Ckt 33
AI1120
x
kW
1
42137/42138
kW Max Logical Circuit 34
Max Instantaneous Real Power - Ckt 34
AI1121
x
kW
1
43137/43138
ZL0135-0A
Description
Page 83 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kW Max Logical Circuit 35
Max Instantaneous Real Power - Ckt 35
AI1122
x
kW
1
44137/44138
kW Max Logical Circuit 36
Max Instantaneous Real Power - Ckt 36
AI1123
x
kW
1
45137/45138
kW Max Logical Circuit 37
Max Instantaneous Real Power - Ckt 37
AI1124
x
kW
1
46137/46138
kW Max Logical Circuit 38
Max Instantaneous Real Power - Ckt 38
AI1125
x
kW
1
47137/47138
kW Max Logical Circuit 39
Max Instantaneous Real Power - Ckt 39
AI1126
x
kW
1
48137/48138
kW Max Logical Circuit 40
Max Instantaneous Real Power - Ckt 40
AI1127
x
kW
1
49137/49138
kW Max Logical Circuit 41
Max Instantaneous Real Power - Ckt 41
AI1128
x
kW
1
50137/50138
kW Max Logical Circuit 42
Max Instantaneous Real Power - Ckt 42
AI1129
x
kW
1
51137/51138
kW Max Logical Circuit 43
Max Instantaneous Real Power - Ckt 43
AI1130
x
kW
1
52137/52138
kW Max Logical Circuit 44
Max Instantaneous Real Power - Ckt 44
AI1131
x
kW
1
53137/53138
kW Max Logical Circuit 45
Max Instantaneous Real Power - Ckt 45
AI1132
x
kW
1
54137/54138
kW Max Logical Circuit 46
Max Instantaneous Real Power - Ckt 46
AI1133
x
kW
1
55137/55138
kWh Snapshot Logical Circuit 1
Energy Snapshot - Circuit 1
AI1134
x
kWh
0
10157/10158
kWh Snapshot Logical Circuit 2
Energy Snapshot - Circuit 2
AI1135
x
kWh
0
11157/11158
kWh Snapshot Logical Circuit 3
Energy Snapshot - Circuit 3
AI1136
x
kWh
0
12157/12158
kWh Snapshot Logical Circuit 4
Energy Snapshot - Circuit 4
AI1137
x
kWh
0
13157/13158
kWh Snapshot Logical Circuit 5
Energy Snapshot - Circuit 5
AI1138
x
kWh
0
14157/14158
kWh Snapshot Logical Circuit 6
Energy Snapshot - Circuit 6
AI1139
x
kWh
0
15157/15158
kWh Snapshot Logical Circuit 7
Energy Snapshot - Circuit 7
AI1140
x
kWh
0
16157/16158
kWh Snapshot Logical Circuit 8
Energy Snapshot - Circuit 8
AI1141
x
kWh
0
17157/17158
kWh Snapshot Logical Circuit 9
Energy Snapshot - Circuit 9
AI1142
x
kWh
0
18157/18158
kWh Snapshot Logical Circuit 10
Energy Snapshot - Circuit 10
AI1143
x
kWh
0
19157/19158
kWh Snapshot Logical Circuit 11
Energy Snapshot - Circuit 11
AI1144
x
kWh
0
20157/20158
kWh Snapshot Logical Circuit 12
Energy Snapshot - Circuit 12
AI1145
x
kWh
0
21157/21158
kWh Snapshot Logical Circuit 13
Energy Snapshot - Circuit 13
AI1146
x
kWh
0
22157/22158
kWh Snapshot Logical Circuit 14
Energy Snapshot - Circuit 14
AI1147
x
kWh
0
23157/23158
kWh Snapshot Logical Circuit 15
Energy Snapshot - Circuit 15
AI1148
x
kWh
0
24157/24158
kWh Snapshot Logical Circuit 16
Energy Snapshot - Circuit 16
AI1149
x
kWh
0
25157/25158
kWh Snapshot Logical Circuit 17
Energy Snapshot - Circuit 17
AI1150
x
kWh
0
26157/26158
kWh Snapshot Logical Circuit 18
Energy Snapshot - Circuit 18
AI1151
x
kWh
0
27157/27158
kWh Snapshot Logical Circuit 19
Energy Snapshot - Circuit 19
AI1152
x
kWh
0
28157/28158
kWh Snapshot Logical Circuit 20
Energy Snapshot - Circuit 20
AI1153
x
kWh
0
29157/29158
kWh Snapshot Logical Circuit 21
Energy Snapshot - Circuit 21
AI1154
x
kWh
0
30157/30158
kWh Snapshot Logical Circuit 22
Energy Snapshot - Circuit 22
AI1155
x
kWh
0
31157/31158
kWh Snapshot Logical Circuit 23
Energy Snapshot - Circuit 23
AI1156
x
kWh
0
32157/32158
kWh Snapshot Logical Circuit 24
Energy Snapshot - Circuit 24
AI1157
x
kWh
0
33157/33158
kWh Snapshot Logical Circuit 25
Energy Snapshot - Circuit 25
AI1158
x
kWh
0
34157/34158
ZL0135-0A
Description
Page 84 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
kWh Snapshot Logical Circuit 26
Energy Snapshot - Circuit 26
AI1159
x
kWh
0
35157/35158
kWh Snapshot Logical Circuit 27
Energy Snapshot - Circuit 27
AI1160
x
kWh
0
36157/36158
kWh Snapshot Logical Circuit 28
Energy Snapshot - Circuit 28
AI1161
x
kWh
0
37157/37158
kWh Snapshot Logical Circuit 29
Energy Snapshot - Circuit 29
AI1162
x
kWh
0
38157/38158
kWh Snapshot Logical Circuit 30
Energy Snapshot - Circuit 30
AI1163
x
kWh
0
39157/39158
kWh Snapshot Logical Circuit 31
Energy Snapshot - Circuit 31
AI1164
x
kWh
0
40157/40158
kWh Snapshot Logical Circuit 32
Energy Snapshot - Circuit 32
AI1165
x
kWh
0
41157/41158
kWh Snapshot Logical Circuit 33
Energy Snapshot - Circuit 33
AI1166
x
kWh
0
42157/42158
kWh Snapshot Logical Circuit 34
Energy Snapshot - Circuit 34
AI1167
x
kWh
0
43157/43158
kWh Snapshot Logical Circuit 35
Energy Snapshot - Circuit 35
AI1168
x
kWh
0
44157/44158
kWh Snapshot Logical Circuit 36
Energy Snapshot - Circuit 36
AI1169
x
kWh
0
45157/45158
kWh Snapshot Logical Circuit 37
Energy Snapshot - Circuit 37
AI1170
x
kWh
0
46157/46158
kWh Snapshot Logical Circuit 38
Energy Snapshot - Circuit 38
AI1171
x
kWh
0
47157/47158
kWh Snapshot Logical Circuit 39
Energy Snapshot - Circuit 39
AI1172
x
kWh
0
48157/48158
kWh Snapshot Logical Circuit 40
Energy Snapshot - Circuit 40
AI1173
x
kWh
0
49157/49158
kWh Snapshot Logical Circuit 41
Energy Snapshot - Circuit 41
AI1174
x
kWh
0
50157/50158
kWh Snapshot Logical Circuit 42
Energy Snapshot - Circuit 42
AI1175
x
kWh
0
51157/51158
kWh Snapshot Logical Circuit 43
Energy Snapshot - Circuit 43
AI1176
x
kWh
0
52157/52158
kWh Snapshot Logical Circuit 44
Energy Snapshot - Circuit 44
AI1177
x
kWh
0
53157/53158
kWh Snapshot Logical Circuit 45
Energy Snapshot - Circuit 45
AI1178
x
kWh
0
54157/54158
kWh Snapshot Logical Circuit 46
Energy Snapshot - Circuit 46
AI1179
x
kWh
0
55157/55158
Amps Demand Logical Circuit 1
Present Current Demand - Circuit 1
AI1180
x
Amperes
5
10127/10128
Amps Demand Logical Circuit 2
Present Current Demand - Circuit 2
AI1181
x
Amperes
5
11127/11128
Amps Demand Logical Circuit 3
Present Current Demand - Circuit 3
AI1182
x
Amperes
5
12127/12128
Amps Demand Logical Circuit 4
Present Current Demand - Circuit 4
AI1183
x
Amperes
5
13127/13128
Amps Demand Logical Circuit 5
Present Current Demand - Circuit 5
AI1184
x
Amperes
5
14127/14128
Amps Demand Logical Circuit 6
Present Current Demand - Circuit 6
AI1185
x
Amperes
5
15127/15128
Amps Demand Logical Circuit 7
Present Current Demand - Circuit 7
AI1186
x
Amperes
5
16127/16128
Amps Demand Logical Circuit 8
Present Current Demand - Circuit 8
AI1187
x
Amperes
5
17127/17128
Amps Demand Logical Circuit 9
Present Current Demand - Circuit 9
AI1188
x
Amperes
5
18127/18128
Amps Demand Logical Circuit 10
Present Current Demand - Circuit 10
AI1189
x
Amperes
5
19127/19128
Amps Demand Logical Circuit 11
Present Current Demand - Circuit 11
AI1190
x
Amperes
5
20127/20128
Amps Demand Logical Circuit 12
Present Current Demand - Circuit 12
AI1191
x
Amperes
5
21127/21128
Amps Demand Logical Circuit 13
Present Current Demand - Circuit 13
AI1192
x
Amperes
5
22127/22128
Amps Demand Logical Circuit 14
Present Current Demand - Circuit 14
AI1193
x
Amperes
5
23127/23128
Amps Demand Logical Circuit 15
Present Current Demand - Circuit 15
AI1194
x
Amperes
5
24127/24128
Amps Demand Logical Circuit 16
Present Current Demand - Circuit 16
AI1195
x
Amperes
5
25127/25128
ZL0135-0A
Description
Page 85 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Amps Demand Logical Circuit 17
Present Current Demand - Circuit 17
AI1196
x
Amperes
5
26127/26128
Amps Demand Logical Circuit 18
Present Current Demand - Circuit 18
AI1197
x
Amperes
5
27127/27128
Amps Demand Logical Circuit 19
Present Current Demand - Circuit 19
AI1198
x
Amperes
5
28127/28128
Amps Demand Logical Circuit 20
Present Current Demand - Circuit 20
AI1199
x
Amperes
5
29127/29128
Amps Demand Logical Circuit 21
Present Current Demand - Circuit 21
AI1200
x
Amperes
5
30127/30128
Amps Demand Logical Circuit 22
Present Current Demand - Circuit 22
AI1201
x
Amperes
5
31127/31128
Amps Demand Logical Circuit 23
Present Current Demand - Circuit 23
AI1202
x
Amperes
5
32127/32128
Amps Demand Logical Circuit 24
Present Current Demand - Circuit 24
AI1203
x
Amperes
5
33127/33128
Amps Demand Logical Circuit 25
Present Current Demand - Circuit 25
AI1204
x
Amperes
5
34127/34128
Amps Demand Logical Circuit 26
Present Current Demand - Circuit 26
AI1205
x
Amperes
5
35127/35128
Amps Demand Logical Circuit 27
Present Current Demand - Circuit 27
AI1206
x
Amperes
5
36127/36128
Amps Demand Logical Circuit 28
Present Current Demand - Circuit 28
AI1207
x
Amperes
5
37127/37128
Amps Demand Logical Circuit 29
Present Current Demand - Circuit 29
AI1208
x
Amperes
5
38127/38128
Amps Demand Logical Circuit 30
Present Current Demand - Circuit 30
AI1209
x
Amperes
5
39127/39128
Amps Demand Logical Circuit 31
Present Current Demand - Circuit 31
AI1210
x
Amperes
5
40127/40128
Amps Demand Logical Circuit 32
Present Current Demand - Circuit 32
AI1211
x
Amperes
5
41127/41128
Amps Demand Logical Circuit 33
Present Current Demand - Circuit 33
AI1212
x
Amperes
5
42127/42128
Amps Demand Logical Circuit 34
Present Current Demand - Circuit 34
AI1213
x
Amperes
5
43127/43128
Amps Demand Logical Circuit 35
Present Current Demand - Circuit 35
AI1214
x
Amperes
5
44127/44128
Amps Demand Logical Circuit 36
Present Current Demand - Circuit 36
AI1215
x
Amperes
5
45127/45128
Amps Demand Logical Circuit 37
Present Current Demand - Circuit 37
AI1216
x
Amperes
5
46127/46128
Amps Demand Logical Circuit 38
Present Current Demand - Circuit 38
AI1217
x
Amperes
5
47127/47128
Amps Demand Logical Circuit 39
Present Current Demand - Circuit 39
AI1218
x
Amperes
5
48127/48128
Amps Demand Logical Circuit 40
Present Current Demand - Circuit 40
AI1219
x
Amperes
5
49127/49128
Amps Demand Logical Circuit 41
Present Current Demand - Circuit 41
AI1220
x
Amperes
5
50127/50128
Amps Demand Logical Circuit 42
Present Current Demand - Circuit 42
AI1221
x
Amperes
5
51127/51128
Amps Demand Logical Circuit 43
Present Current Demand - Circuit 43
AI1222
x
Amperes
5
52127/52128
Amps Demand Logical Circuit 44
Present Current Demand - Circuit 44
AI1223
x
Amperes
5
53127/53128
Amps Demand Logical Circuit 45
Present Current Demand - Circuit 45
AI1224
x
Amperes
5
54127/54128
Amps Demand Logical Circuit 46
Present Current Demand - Circuit 46
AI1225
x
Amperes
5
55127/55128
Amps Max Demand Logical Circuit 1
Maximum Current Demand - Circuit 1
AI1226
x
Amperes
5
10135/10136
Amps Max Demand Logical Circuit 2
Maximum Current Demand - Circuit 2
AI1227
x
Amperes
5
11135/11136
Amps Max Demand Logical Circuit 3
Maximum Current Demand - Circuit 3
AI1228
x
Amperes
5
12135/12136
Amps Max Demand Logical Circuit 4
Maximum Current Demand - Circuit 4
AI1229
x
Amperes
5
13135/13136
Amps Max Demand Logical Circuit 5
Maximum Current Demand - Circuit 5
AI1230
x
Amperes
5
14135/14136
Amps Max Demand Logical Circuit 6
Maximum Current Demand - Circuit 6
AI1231
x
Amperes
5
15135/15136
Amps Max Demand Logical Circuit 7
Maximum Current Demand - Circuit 7
AI1232
x
Amperes
5
16135/16136
ZL0135-0A
Description
Page 86 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Amps Max Demand Logical Circuit 8
Maximum Current Demand - Circuit 8
AI1233
x
Amperes
5
17135/17136
Amps Max Demand Logical Circuit 9
Maximum Current Demand - Circuit 9
AI1234
x
Amperes
5
18135/18136
Amps Max Demand Logical Circuit 10
Maximum Current Demand - Circuit 10
AI1235
x
Amperes
5
19135/19136
Amps Max Demand Logical Circuit 11
Maximum Current Demand - Circuit 11
AI1236
x
Amperes
5
20135/20136
Amps Max Demand Logical Circuit 12
Maximum Current Demand - Circuit 12
AI1237
x
Amperes
5
21135/21136
Amps Max Demand Logical Circuit 13
Maximum Current Demand - Circuit 13
AI1238
x
Amperes
5
22135/22136
Amps Max Demand Logical Circuit 14
Maximum Current Demand - Circuit 14
AI1239
x
Amperes
5
23135/23136
Amps Max Demand Logical Circuit 15
Maximum Current Demand - Circuit 15
AI1240
x
Amperes
5
24135/24136
Amps Max Demand Logical Circuit 16
Maximum Current Demand - Circuit 16
AI1241
x
Amperes
5
25135/25136
Amps Max Demand Logical Circuit 17
Maximum Current Demand - Circuit 17
AI1242
x
Amperes
5
26135/26136
Amps Max Demand Logical Circuit 18
Maximum Current Demand - Circuit 18
AI1243
x
Amperes
5
27135/27136
Amps Max Demand Logical Circuit 19
Maximum Current Demand - Circuit 19
AI1244
x
Amperes
5
28135/28136
Amps Max Demand Logical Circuit 20
Maximum Current Demand - Circuit 20
AI1245
x
Amperes
5
29135/29136
Amps Max Demand Logical Circuit 21
Maximum Current Demand - Circuit 21
AI1246
x
Amperes
5
30135/30136
Amps Max Demand Logical Circuit 22
Maximum Current Demand - Circuit 22
AI1247
x
Amperes
5
31135/31136
Amps Max Demand Logical Circuit 23
Maximum Current Demand - Circuit 23
AI1248
x
Amperes
5
32135/32136
Amps Max Demand Logical Circuit 24
Maximum Current Demand - Circuit 24
AI1249
x
Amperes
5
33135/33136
Amps Max Demand Logical Circuit 25
Maximum Current Demand - Circuit 25
AI1250
x
Amperes
5
34135/34136
Amps Max Demand Logical Circuit 26
Maximum Current Demand - Circuit 26
AI1251
x
Amperes
5
35135/35136
Amps Max Demand Logical Circuit 27
Maximum Current Demand - Circuit 27
AI1252
x
Amperes
5
36135/36136
Amps Max Demand Logical Circuit 28
Maximum Current Demand - Circuit 28
AI1253
x
Amperes
5
37135/37136
Amps Max Demand Logical Circuit 29
Maximum Current Demand - Circuit 29
AI1254
x
Amperes
5
38135/38136
Amps Max Demand Logical Circuit 30
Maximum Current Demand - Circuit 30
AI1255
x
Amperes
5
39135/39136
Amps Max Demand Logical Circuit 31
Maximum Current Demand - Circuit 31
AI1256
x
Amperes
5
40135/40136
Amps Max Demand Logical Circuit 32
Maximum Current Demand - Circuit 32
AI1257
x
Amperes
5
41135/41136
Amps Max Demand Logical Circuit 33
Maximum Current Demand - Circuit 33
AI1258
x
Amperes
5
42135/42136
Amps Max Demand Logical Circuit 34
Maximum Current Demand - Circuit 34
AI1259
x
Amperes
5
43135/43136
Amps Max Demand Logical Circuit 35
Maximum Current Demand - Circuit 35
AI1260
x
Amperes
5
44135/44136
Amps Max Demand Logical Circuit 36
Maximum Current Demand - Circuit 36
AI1261
x
Amperes
5
45135/45136
Amps Max Demand Logical Circuit 37
Maximum Current Demand - Circuit 37
AI1262
x
Amperes
5
46135/46136
Amps Max Demand Logical Circuit 38
Maximum Current Demand - Circuit 38
AI1263
x
Amperes
5
47135/47136
Amps Max Demand Logical Circuit 39
Maximum Current Demand - Circuit 39
AI1264
x
Amperes
5
48135/48136
Amps Max Demand Logical Circuit 40
Maximum Current Demand - Circuit 40
AI1265
x
Amperes
5
49135/49136
Amps Max Demand Logical Circuit 41
Maximum Current Demand - Circuit 41
AI1266
x
Amperes
5
50135/50136
Amps Max Demand Logical Circuit 42
Maximum Current Demand - Circuit 42
AI1267
x
Amperes
5
51135/51136
Amps Max Demand Logical Circuit 43
Maximum Current Demand - Circuit 43
AI1268
x
Amperes
5
52135/52136
Amps Max Demand Logical Circuit 44
Maximum Current Demand - Circuit 44
AI1269
x
Amperes
5
53135/53136
ZL0135-0A
Description
Page 87 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Modbus
Address
AI1270
x
Amperes
5
54135/54136
x
Amperes
5
55135/55136
AI1272
x
Amperes
5
10143/10144
Maximum Instantaneous Current - Ckt 2
AI1273
x
Amperes
5
11143/11144
Maximum Instantaneous Current - Ckt 3
AI1274
x
Amperes
5
12143/12144
Amps (Maximum) Logical Circuit 4
Maximum Instantaneous Current - Ckt 4
AI1275
x
Amperes
5
13143/13144
Amps (Maximum) Logical Circuit 5
Maximum Instantaneous Current - Ckt 5
AI1276
x
Amperes
5
14143/14144
Amps (Maximum) Logical Circuit 6
Maximum Instantaneous Current - Ckt 6
AI1277
x
Amperes
5
15143/15144
Amps (Maximum) Logical Circuit 7
Maximum Instantaneous Current - Ckt 7
AI1278
x
Amperes
5
16143/16144
Amps (Maximum) Logical Circuit 8
Maximum Instantaneous Current - Ckt 8
AI1279
x
Amperes
5
17143/17144
Amps (Maximum) Logical Circuit 9
Maximum Instantaneous Current - Ckt 9
AI1280
x
Amperes
5
18143/18144
Amps (Maximum) Logical Circuit 10
Maximum Instantaneous Current - Ckt
10
AI1281
x
Amperes
5
19143/19144
Amps (Maximum) Logical Circuit 11
Maximum Instantaneous Current - Ckt
11
AI1282
x
Amperes
5
20143/20144
Amps (Maximum) Logical Circuit 12
Maximum Instantaneous Current - Ckt
12
AI1283
x
Amperes
5
21143/21144
Amps (Maximum) Logical Circuit 13
Maximum Instantaneous Current - Ckt
13
AI1284
x
Amperes
5
22143/22144
Amps (Maximum) Logical Circuit 14
Maximum Instantaneous Current - Ckt
14
AI1285
x
Amperes
5
23143/23144
Amps (Maximum) Logical Circuit 15
Maximum Instantaneous Current - Ckt
15
AI1286
x
Amperes
5
24143/24144
Amps (Maximum) Logical Circuit 16
Maximum Instantaneous Current - Ckt
16
AI1287
x
Amperes
5
25143/25144
Amps (Maximum) Logical Circuit 17
Maximum Instantaneous Current - Ckt
17
AI1288
x
Amperes
5
26143/26144
Amps (Maximum) Logical Circuit 18
Maximum Instantaneous Current - Ckt
18
AI1289
x
Amperes
5
27143/27144
Amps (Maximum) Logical Circuit 19
Maximum Instantaneous Current - Ckt
19
AI1290
x
Amperes
5
28143/28144
Amps (Maximum) Logical Circuit 20
Maximum Instantaneous Current - Ckt
20
AI1291
x
Amperes
5
29143/29144
Amps (Maximum) Logical Circuit 21
Maximum Instantaneous Current - Ckt
21
AI1292
x
Amperes
5
30143/30144
Amps (Maximum) Logical Circuit 22
Maximum Instantaneous Current - Ckt
22
AI1293
x
Amperes
5
31143/31144
Amps (Maximum) Logical Circuit 23
Maximum Instantaneous Current - Ckt
23
AI1294
x
Amperes
5
32143/32144
Amps (Maximum) Logical Circuit 24
Maximum Instantaneous Current - Ckt
24
AI1295
x
Amperes
5
33143/33144
Description
Amps Max Demand Logical Circuit 45
Maximum Current Demand - Circuit 45
Amps Max Demand Logical Circuit 46
Maximum Current Demand - Circuit 46
AI1271
Amps (Maximum) Logical Circuit 1
Maximum Instantaneous Current - Ckt 1
Amps (Maximum) Logical Circuit 2
Amps (Maximum) Logical Circuit 3
ZL0135-0A
Page 88 of 162
FW < V1.016
FW> = V1.203
Units
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
Amps (Maximum) Logical Circuit 25
Maximum Instantaneous Current - Ckt
25
AI1296
x
Amperes
5
34143/34144
Amps (Maximum) Logical Circuit 26
Maximum Instantaneous Current - Ckt
26
AI1297
x
Amperes
5
35143/35144
Amps (Maximum) Logical Circuit 27
Maximum Instantaneous Current - Ckt
27
AI1298
x
Amperes
5
36143/36144
Amps (Maximum) Logical Circuit 28
Maximum Instantaneous Current - Ckt
28
AI1299
x
Amperes
5
37143/37144
Amps (Maximum) Logical Circuit 29
Maximum Instantaneous Current - Ckt
29
AI1300
x
Amperes
5
38143/38144
Amps (Maximum) Logical Circuit 30
Maximum Instantaneous Current - Ckt
30
AI1301
x
Amperes
5
39143/39144
Amps (Maximum) Logical Circuit 31
Maximum Instantaneous Current - Ckt
31
AI1302
x
Amperes
5
40143/40144
Amps (Maximum) Logical Circuit 32
Maximum Instantaneous Current - Ckt
32
AI1303
x
Amperes
5
41143/41144
Amps (Maximum) Logical Circuit 33
Maximum Instantaneous Current - Ckt
33
AI1304
x
Amperes
5
42143/42144
Amps (Maximum) Logical Circuit 34
Maximum Instantaneous Current - Ckt
34
AI1305
x
Amperes
5
43143/43144
Amps (Maximum) Logical Circuit 35
Maximum Instantaneous Current - Ckt
35
AI1306
x
Amperes
5
44143/44144
Amps (Maximum) Logical Circuit 36
Maximum Instantaneous Current - Ckt
36
AI1307
x
Amperes
5
45143/45144
Amps (Maximum) Logical Circuit 37
Maximum Instantaneous Current - Ckt
37
AI1308
x
Amperes
5
46143/46144
Amps (Maximum) Logical Circuit 38
Maximum Instantaneous Current - Ckt
38
AI1309
x
Amperes
5
47143/47144
Amps (Maximum) Logical Circuit 39
Maximum Instantaneous Current - Ckt
39
AI1310
x
Amperes
5
48143/48144
Amps (Maximum) Logical Circuit 40
Maximum Instantaneous Current - Ckt
40
AI1311
x
Amperes
5
49143/49144
Amps (Maximum) Logical Circuit 41
Maximum Instantaneous Current - Ckt
41
AI1312
x
Amperes
5
50143/50144
Amps (Maximum) Logical Circuit 42
Maximum Instantaneous Current - Ckt
42
AI1313
x
Amperes
5
51143/51144
Amps (Maximum) Logical Circuit 43
Maximum Instantaneous Current - Ckt
43
AI1314
x
Amperes
5
52143/52144
Amps (Maximum) Logical Circuit 44
Maximum Instantaneous Current - Ckt
44
AI1315
x
Amperes
5
53143/53144
Amps (Maximum) Logical Circuit 45
Maximum Instantaneous Current - Ckt
45
AI1316
x
Amperes
5
54143/54144
Amps (Maximum) Logical Circuit 46
Maximum Instantaneous Current - Ckt
46
AI1317
x
Amperes
5
55143/55144
Phase Angle Channel 1
Current Phase Angle - Channel 1
AI1318
x
degreesangular
5
2924/2925
ZL0135-0A
Description
Page 89 of 162
FW < V1.016
FW> = V1.203
Modbus
Address
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Units
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
Current Phase Angle - Channel 2
AI1319
x
degreesangular
5
2926/2927
Phase Angle Channel 3
Current Phase Angle - Channel 3
AI1320
x
degreesangular
5
2928/2929
Phase Angle Channel 4
Current Phase Angle - Channel 4
AI1321
x
degreesangular
5
2930/2931
Phase Angle Channel 5
Current Phase Angle - Channel 5
AI1322
x
degreesangular
5
2932/2933
Phase Angle Channel 6
Current Phase Angle - Channel 6
AI1323
x
degreesangular
5
2934/2935
Phase Angle Channel 7
Current Phase Angle - Channel 7
AI1324
x
degreesangular
5
2936/2937
Phase Angle Channel 8
Current Phase Angle - Channel 8
AI1325
x
degreesangular
5
2938/2939
Phase Angle Channel 9
Current Phase Angle - Channel 9
AI1326
x
degreesangular
5
2940/2941
Phase Angle Channel 10
Current Phase Angle - Channel 10
AI1327
x
degreesangular
5
2942/2943
Phase Angle Channel 11
Current Phase Angle - Channel 11
AI1328
x
degreesangular
5
2944/2945
Phase Angle Channel 12
Current Phase Angle - Channel 12
AI1329
x
degreesangular
5
2946/2947
Phase Angle Channel 13
Current Phase Angle - Channel 13
AI1330
x
degreesangular
5
2948/2949
Phase Angle Channel 14
Current Phase Angle - Channel 14
AI1331
x
degreesangular
5
2950/2951
Phase Angle Channel 15
Current Phase Angle - Channel 15
AI1332
x
degreesangular
5
2952/2953
Phase Angle Channel 16
Current Phase Angle - Channel 16
AI1333
x
degreesangular
5
2954/2955
Phase Angle Channel 17
Current Phase Angle - Channel 17
AI1334
x
degreesangular
5
2956/2957
Phase Angle Channel 18
Current Phase Angle - Channel 18
AI1335
x
degreesangular
5
2958/2959
Phase Angle Channel 19
Current Phase Angle - Channel 19
AI1336
x
degreesangular
5
2960/2961
Phase Angle Channel 20
Current Phase Angle - Channel 20
AI1337
x
degreesangular
5
2962/2963
Phase Angle Channel 21
Current Phase Angle - Channel 21
AI1338
x
degreesangular
5
2964/2965
Phase Angle Channel 22
Current Phase Angle - Channel 22
AI1339
x
degreesangular
5
2966/2967
Phase Angle Channel 23
Current Phase Angle - Channel 23
AI1340
x
degreesangular
5
2968/2969
ZL0135-0A
Description
Page 90 of 162
FW < V1.016
FW> = V1.203
Phase Angle Channel 2
Data Variable
1.016-1.022
BACnet Object
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
Current Phase Angle - Channel 24
AI1341
x
degreesangular
5
2970/2971
Phase Angle Channel 25
Current Phase Angle - Channel 25
AI1342
x
degreesangular
5
2972/2973
Phase Angle Channel 26
Current Phase Angle - Channel 26
AI1343
x
degreesangular
5
2974/2975
Phase Angle Channel 27
Current Phase Angle - Channel 27
AI1344
x
degreesangular
5
2976/2977
Phase Angle Channel 28
Current Phase Angle - Channel 28
AI1345
x
degreesangular
5
2978/2979
Phase Angle Channel 29
Current Phase Angle - Channel 29
AI1346
x
degreesangular
5
2980/2981
Phase Angle Channel 30
Current Phase Angle - Channel 30
AI1347
x
degreesangular
5
2982/2983
Phase Angle Channel 31
Current Phase Angle - Channel 31
AI1348
x
degreesangular
5
2984/2985
Phase Angle Channel 32
Current Phase Angle - Channel 32
AI1349
x
degreesangular
5
2986/2987
Phase Angle Channel 33
Current Phase Angle - Channel 33
AI1350
x
degreesangular
5
2988/2989
Phase Angle Channel 34
Current Phase Angle - Channel 34
AI1351
x
degreesangular
5
2990/2991
Phase Angle Channel 35
Current Phase Angle - Channel 35
AI1352
x
degreesangular
5
2992/2993
Phase Angle Channel 36
Current Phase Angle - Channel 36
AI1353
x
degreesangular
5
2994/2995
Phase Angle Channel 37
Current Phase Angle - Channel 37
AI1354
x
degreesangular
5
2996/2997
Phase Angle Channel 38
Current Phase Angle - Channel 38
AI1355
x
degreesangular
5
2998/2999
Phase Angle Channel 39
Current Phase Angle - Channel 39
AI1356
x
degreesangular
5
3000/3001
Phase Angle Channel 40
Current Phase Angle - Channel 40
AI1357
x
degreesangular
5
3002/3003
Phase Angle Channel 41
Current Phase Angle - Channel 41
AI1358
x
degreesangular
5
3004/3005
Phase Angle Channel 42
Current Phase Angle - Channel 42
AI1359
x
degreesangular
5
3006/3007
kWh Snapshot Channel 1
Energy Snapshot - Channel 1
AI1360
x
kWh
0
3008/3009
kWh Snapshot Channel 2
Energy Snapshot - Channel 2
AI1361
x
kWh
0
4008/4009
kWh Snapshot Channel 3
Energy Snapshot - Channel 3
AI1362
x
kWh
0
5008/5009
kWh Snapshot Channel 4
Energy Snapshot - Channel 4
AI1363
x
kWh
0
6008/6009
kWh Snapshot Channel 5
Energy Snapshot - Channel 5
AI1364
x
kWh
0
7008/7009
kWh Snapshot Channel 6
Energy Snapshot - Channel 6
AI1365
x
kWh
0
8008/8009
ZL0135-0A
Description
Page 91 of 162
FW < V1.016
FW> = V1.203
Phase Angle Channel 24
Data Variable
1.016-1.022
BACnet Object
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
Energy Snapshot - Channel 7
AI1366
x
kWh
0
9008/9009
kWh Snapshot Channel 8
Energy Snapshot - Channel 8
AI1367
x
kWh
0
10008/10009
kWh Snapshot Channel 9
Energy Snapshot - Channel 9
AI1368
x
kWh
0
11008/11009
kWh Snapshot Channel 10
Energy Snapshot - Channel 10
AI1369
x
kWh
0
12008/12009
kWh Snapshot Channel 11
Energy Snapshot - Channel 11
AI1370
x
kWh
0
13008/13009
kWh Snapshot Channel 12
Energy Snapshot - Channel 12
AI1371
x
kWh
0
14008/14009
kWh Snapshot Channel 13
Energy Snapshot - Channel 13
AI1372
x
kWh
0
15008/15009
kWh Snapshot Channel 14
Energy Snapshot - Channel 14
AI1373
x
kWh
0
16008/16009
kWh Snapshot Channel 15
Energy Snapshot - Channel 15
AI1374
x
kWh
0
17008/17009
kWh Snapshot Channel 16
Energy Snapshot - Channel 16
AI1375
x
kWh
0
18008/18009
kWh Snapshot Channel 17
Energy Snapshot - Channel 17
AI1376
x
kWh
0
19008/19009
kWh Snapshot Channel 18
Energy Snapshot - Channel 18
AI1377
x
kWh
0
20008/20009
kWh Snapshot Channel 19
Energy Snapshot - Channel 19
AI1378
x
kWh
0
21008/21009
kWh Snapshot Channel 20
Energy Snapshot - Channel 20
AI1379
x
kWh
0
22008/22009
kWh Snapshot Channel 21
Energy Snapshot - Channel 21
AI1380
x
kWh
0
23008/23009
kWh Snapshot Channel 22
Energy Snapshot - Channel 22
AI1381
x
kWh
0
24008/24009
kWh Snapshot Channel 23
Energy Snapshot - Channel 23
AI1382
x
kWh
0
25008/25009
kWh Snapshot Channel 24
Energy Snapshot - Channel 24
AI1383
x
kWh
0
26008/26009
kWh Snapshot Channel 25
Energy Snapshot - Channel 25
AI1384
x
kWh
0
27008/27009
kWh Snapshot Channel 26
Energy Snapshot - Channel 26
AI1385
x
kWh
0
28008/28009
kWh Snapshot Channel 27
Energy Snapshot - Channel 27
AI1386
x
kWh
0
29008/29009
kWh Snapshot Channel 28
Energy Snapshot - Channel 28
AI1387
x
kWh
0
30008/30009
kWh Snapshot Channel 29
Energy Snapshot - Channel 29
AI1388
x
kWh
0
31008/31009
kWh Snapshot Channel 30
Energy Snapshot - Channel 30
AI1389
x
kWh
0
32008/32009
kWh Snapshot Channel 31
Energy Snapshot - Channel 31
AI1390
x
kWh
0
33008/33009
kWh Snapshot Channel 32
Energy Snapshot - Channel 32
AI1391
x
kWh
0
34008/34009
kWh Snapshot Channel 33
Energy Snapshot - Channel 33
AI1392
x
kWh
0
35008/35009
kWh Snapshot Channel 34
Energy Snapshot - Channel 34
AI1393
x
kWh
0
36008/36009
kWh Snapshot Channel 35
Energy Snapshot - Channel 35
AI1394
x
kWh
0
37008/37009
kWh Snapshot Channel 36
Energy Snapshot - Channel 36
AI1395
x
kWh
0
38008/38009
kWh Snapshot Channel 37
Energy Snapshot - Channel 37
AI1396
x
kWh
0
39008/39009
kWh Snapshot Channel 38
Energy Snapshot - Channel 38
AI1397
x
kWh
0
40008/40009
kWh Snapshot Channel 39
Energy Snapshot - Channel 39
AI1398
x
kWh
0
41008/41009
kWh Snapshot Channel 40
Energy Snapshot - Channel 40
AI1399
x
kWh
0
42008/42009
kWh Snapshot Channel 41
Energy Snapshot - Channel 41
AI1400
x
kWh
0
43008/43009
kWh Snapshot Channel 42
Energy Snapshot - Channel 42
AI1401
x
kWh
0
44008/44009
kWh Snapshot - Aux Total
Energy Snapshot - Total of Aux inputs
AI1402
x
kWh
0
45008/45009
ZL0135-0A
Description
Page 92 of 162
FW < V1.016
FW> = V1.203
kWh Snapshot Channel 7
Data Variable
1.016-1.022
BACnet Object
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
1.016-1.022
AV1
x
x
Units
COV Increment
FW> = V1.203
Configuration (bit 0 is LSB):
Data Variable
FW < V1.016
Description
BACnet Object
E3xA/E
x
No-Units
1
Modbus
Address
Comments
Analog_Value Objects
Configuration (bit 0 is LSB):
6
“bit 0: 0 = odd-even, 1 =
sequential
bit 1: 0 = odd-even, 1 =
sequential
bits 2-15: future use
Examples:
Value 0 = Odd/Even
Value 1 = Reserved for Solid-Core
Value 2 = Sequential
Value 3 = Reserved for Solid-Core
see product installation guide for
diagrams”
# of Sub-Intervals per Demand Int.
Number of Sub-Intervals per Interval
AV2
x
x
x
No-Units
1
71
Number of Sub-Intervals per
Demand Interval Sets the number
of sub-intervals that make a
single demand interval. For block
demand, set this to 1.
Sub-Interval Length in seconds.
Sub-Interval Length in seconds.
AV3
x
x
x
No-Units
1
72
Sub-Interval Length in seconds. For
sync-to-comms, set this to 0.
Branch 1 CT Size
Branch 1 CT Size
AV4
x
x
x
Amperes
5
73
“These are NOT WRITABLE on
E30Axxx solid-core Models
because CT size is fixed (at 100A).
Other values written will revert to
100A the next time the meter is
scanned.
They are writable on E31Axxx
split-core models.”
Branch 2 CT Size
Branch 2 CT Size
AV5
x
x
x
Amperes
5
74
Branch 3 CT Size
Branch 3 CT Size
AV6
x
x
x
Amperes
5
75
Branch 4 CT Size
Branch 4 CT Size
AV7
x
x
x
Amperes
5
76
Branch 5 CT Size
Branch 5 CT Size
AV8
x
x
x
Amperes
5
77
Branch 6 CT Size
Branch 6 CT Size
AV9
x
x
x
Amperes
5
78
Branch 7 CT Size
Branch 7 CT Size
AV10
x
x
x
Amperes
5
79
Branch 8 CT Size
Branch 8 CT Size
AV11
x
x
x
Amperes
5
80
Branch 9 CT Size
Branch 9 CT Size
AV12
x
x
x
Amperes
5
81
Branch 10 CT Size
Branch 10 CT Size
AV13
x
x
x
Amperes
5
82
Branch 11 CT Size
Branch 11 CT Size
AV14
x
x
x
Amperes
5
83
Branch 12 CT Size
Branch 12 CT Size
AV15
x
x
x
Amperes
5
84
Branch 13 CT Size
Branch 13 CT Size
AV16
x
x
x
Amperes
5
85
Branch 14 CT Size
Branch 14 CT Size
AV17
x
x
x
Amperes
5
86
Branch 15 CT Size
Branch 15 CT Size
AV18
x
x
x
Amperes
5
87
Branch 16 CT Size
Branch 16 CT Size
AV19
x
x
x
Amperes
5
88
Branch 17 CT Size
Branch 17 CT Size
AV20
x
x
x
Amperes
5
89
ZL0135-0A
Page 93 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Branch 18 CT Size
Branch 18 CT Size
AV21
x
x
x
Amperes
5
90
Branch 19 CT Size
Branch 19 CT Size
AV22
x
x
x
Amperes
5
91
Branch 20 CT Size
Branch 20 CT Size
AV23
x
x
x
Amperes
5
92
Branch 21 CT Size
Branch 21 CT Size
AV24
x
x
x
Amperes
5
93
Branch 22 CT Size
Branch 22 CT Size
AV25
x
x
x
Amperes
5
94
Branch 23 CT Size
Branch 23 CT Size
AV26
x
x
x
Amperes
5
95
Branch 24 CT Size
Branch 24 CT Size
AV27
x
x
x
Amperes
5
96
Branch 25 CT Size
Branch 25 CT Size
AV28
x
x
x
Amperes
5
97
Branch 26 CT Size
Branch 26 CT Size
AV29
x
x
x
Amperes
5
98
Branch 27 CT Size
Branch 27 CT Size
AV30
x
x
x
Amperes
5
99
Branch 28 CT Size
Branch 28 CT Size
AV31
x
x
x
Amperes
5
100
Branch 29 CT Size
Branch 29 CT Size
AV32
x
x
x
Amperes
5
101
Branch 30 CT Size
Branch 30 CT Size
AV33
x
x
x
Amperes
5
102
Branch 31 CT Size
Branch 31 CT Size
AV34
x
x
x
Amperes
5
103
Branch 32 CT Size
Branch 32 CT Size
AV35
x
x
x
Amperes
5
104
Branch 33 CT Size
Branch 33 CT Size
AV36
x
x
x
Amperes
5
105
Branch 34 CT Size
Branch 34 CT Size
AV37
x
x
x
Amperes
5
106
Branch 35 CT Size
Branch 35 CT Size
AV38
x
x
x
Amperes
5
107
Branch 36 CT Size
Branch 36 CT Size
AV39
x
x
x
Amperes
5
108
Branch 37 CT Size
Branch 37 CT Size
AV40
x
x
x
Amperes
5
109
Branch 38 CT Size
Branch 38 CT Size
AV41
x
x
x
Amperes
5
110
Branch 39 CT Size
Branch 39 CT Size
AV42
x
x
x
Amperes
5
111
Branch 40 CT Size
Branch 40 CT Size
AV43
x
x
x
Amperes
5
112
Branch 41 CT Size
Branch 41 CT Size
AV44
x
x
x
Amperes
5
113
Branch 42 CT Size
Branch 42 CT Size
AV45
x
x
x
Amperes
5
114
AUX Channel (phase 1) CT Size
AUX Channel (phase 1) CT Size
AV46
x
x
x
Amperes
5
115
AUX Channel (phase 2) CT Size
AUX Channel (phase 2) CT Size
AV47
x
x
x
Amperes
5
116
AUX Channel (phase 3) CT Size
AUX Channel (phase 3) CT Size
AV48
x
x
x
Amperes
5
117
AUX Channel (Neutral) CT Size
AUX Channel (Neutral) CT Size
AV49
x
x
x
Amperes
5
118
Branch 1 Breaker Size
Branch 1 Breaker Size
AV50
x
x
x
Amperes
5
119
Branch 2 Breaker Size
Branch 2 Breaker Size
AV51
x
x
x
Amperes
5
120
Branch 3 Breaker Size
Branch 3 Breaker Size
AV52
x
x
x
Amperes
5
121
Branch 4 Breaker Size
Branch 4 Breaker Size
AV53
x
x
x
Amperes
5
122
Branch 5 Breaker Size
Branch 5 Breaker Size
AV54
x
x
x
Amperes
5
123
Branch 6 Breaker Size
Branch 6 Breaker Size
AV55
x
x
x
Amperes
5
124
Branch 7 Breaker Size
Branch 7 Breaker Size
AV56
x
x
x
Amperes
5
125
Branch 8 Breaker Size
Branch 8 Breaker Size
AV57
x
x
x
Amperes
5
126
Data Variable
ZL0135-0A
Description
Page 94 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Branch 9 Breaker Size
Branch 9 Breaker Size
AV58
x
x
x
Amperes
5
127
Branch 10 Breaker Size
Branch 10 Breaker Size
AV59
x
x
x
Amperes
5
128
Branch 11 Breaker Size
Branch 11 Breaker Size
AV60
x
x
x
Amperes
5
129
Branch 12 Breaker Size
Branch 12 Breaker Size
AV61
x
x
x
Amperes
5
130
Branch 13 Breaker Size
Branch 13 Breaker Size
AV62
x
x
x
Amperes
5
131
Branch 14 Breaker Size
Branch 14 Breaker Size
AV63
x
x
x
Amperes
5
132
Branch 15 Breaker Size
Branch 15 Breaker Size
AV64
x
x
x
Amperes
5
133
Branch 16 Breaker Size
Branch 16 Breaker Size
AV65
x
x
x
Amperes
5
134
Branch 17 Breaker Size
Branch 17 Breaker Size
AV66
x
x
x
Amperes
5
135
Branch 18 Breaker Size
Branch 18 Breaker Size
AV67
x
x
x
Amperes
5
136
Branch 19 Breaker Size
Branch 19 Breaker Size
AV68
x
x
x
Amperes
5
137
Branch 20 Breaker Size
Branch 20 Breaker Size
AV69
x
x
x
Amperes
5
138
Branch 21 Breaker Size
Branch 21 Breaker Size
AV70
x
x
x
Amperes
5
139
Branch 22 Breaker Size
Branch 22 Breaker Size
AV71
x
x
x
Amperes
5
140
Branch 23 Breaker Size
Branch 23 Breaker Size
AV72
x
x
x
Amperes
5
141
Branch 24 Breaker Size
Branch 24 Breaker Size
AV73
x
x
x
Amperes
5
142
Branch 25 Breaker Size
Branch 25 Breaker Size
AV74
x
x
x
Amperes
5
143
Branch 26 Breaker Size
Branch 26 Breaker Size
AV75
x
x
x
Amperes
5
144
Branch 27 Breaker Size
Branch 27 Breaker Size
AV76
x
x
x
Amperes
5
145
Branch 28 Breaker Size
Branch 28 Breaker Size
AV77
x
x
x
Amperes
5
146
Branch 29 Breaker Size
Branch 29 Breaker Size
AV78
x
x
x
Amperes
5
147
Branch 30 Breaker Size
Branch 30 Breaker Size
AV79
x
x
x
Amperes
5
148
Branch 31 Breaker Size
Branch 31 Breaker Size
AV80
x
x
x
Amperes
5
149
Branch 32 Breaker Size
Branch 32 Breaker Size
AV81
x
x
x
Amperes
5
150
Branch 33 Breaker Size
Branch 33 Breaker Size
AV82
x
x
x
Amperes
5
151
Branch 34 Breaker Size
Branch 34 Breaker Size
AV83
x
x
x
Amperes
5
152
Branch 35 Breaker Size
Branch 35 Breaker Size
AV84
x
x
x
Amperes
5
153
Branch 36 Breaker Size
Branch 36 Breaker Size
AV85
x
x
x
Amperes
5
154
Branch 37 Breaker Size
Branch 37 Breaker Size
AV86
x
x
x
Amperes
5
155
Branch 38 Breaker Size
Branch 38 Breaker Size
AV87
x
x
x
Amperes
5
156
Branch 39 Breaker Size
Branch 39 Breaker Size
AV88
x
x
x
Amperes
5
157
Branch 40 Breaker Size
Branch 40 Breaker Size
AV89
x
x
x
Amperes
5
158
Branch 41 Breaker Size
Branch 41 Breaker Size
AV90
x
x
x
Amperes
5
159
Branch 42 Breaker Size
Branch 42 Breaker Size
AV91
x
x
x
Amperes
5
160
AUX Channel (phase 1) Breaker Size
AUX Channel (phase 1) Breaker Size
AV92
x
x
x
Amperes
5
161
AUX Channel (phase 2) Breaker Size
AUX Channel (phase 2) Breaker Size
AV93
x
x
x
Amperes
5
162
AUX Channel (phase 3) Breaker Size
AUX Channel (phase 3) Breaker Size
AV94
x
x
x
Amperes
5
163
Data Variable
ZL0135-0A
Description
Page 95 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
AUX Channel (Neutral) Breaker Size
AUX Channel (Neutral) Breaker Size
AV95
x
x
x
Amperes
5
164
High-High Latching Alarm Time Delay
Alarm event duration threshold
AV96
x
x
x
Seconds
1
165
These timers control entry into a
latching alarm state. A return to a
non-alarm state is instantaneous.
All channels use the same global
timers. Latching Alarm On Time
applies to all Latching Alarms.
The parameter measurement
rate is expected to be around 2.5
secs, which will limit the effective
resolution of these timers.
High Latching Alarm Time Delay
Alarm event duration threshold
AV97
x
x
x
Seconds
1
166
These timers control entry into a
latching alarm state. A return to a
non-alarm state is instantaneous.
All channels use the same global
timers. Latching Alarm On Time
applies to all Latching Alarms.
The parameter measurement
rate is expected to be around 2.5
secs, which will limit the effective
resolution of these timers.
Low Latching Alarm Time Delay
Alarm event duration threshold
AV98
x
x
x
Seconds
1
167
These timers control entry into a
latching alarm state. A return to a
non-alarm state is instantaneous.
All channels use the same global
timers. Latching Alarm On Time
applies to all Latching Alarms.
The parameter measurement
rate is expected to be around 2.5
secs, which will limit the effective
resolution of these timers.
Low-Low Latching Alarm Time Delay
Alarm event duration threshold
AV99
x
x
x
Seconds
1
168
These timers control entry into a
latching alarm state. A return to a
non-alarm state is instantaneous.
All channels use the same global
timers. Latching Alarm On Time
applies to all Latching Alarms.
The parameter measurement
rate is expected to be around 2.5
secs, which will limit the effective
resolution of these timers.
Latching Alarm ON Time
From initial current to alarms enabled
AV100
x
x
x
Seconds
1
169
Latching Alarm ON Time (when
current is above Low-Low alarm &
ON Time elapses then ON state is
declared for all latching alarms, ON
State enables Alarm Time Delays)
Latching Alarms time until OFF state
time until OFF state declared
AV101
x
x
x
Seconds
1
170
Latching Alarms time until OFF
state is declared for all latching
alarms (when current is below
Low-Low alarm and a ON state
was declared)
High-High Latching Alarm Threshold
% of breaker size
AV102
x
x
x
Percent
1
171
High Alarm Latching Alarm Threshold
% of breaker size
AV103
x
x
x
Percent
1
172
Data Variable
ZL0135-0A
Description
Page 96 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
Units
COV Increment
E3xA/E
Low Alarm Latching Alarm Threshold
% of breaker size
AV104
x
x
x
Percent
1
173
Low Low Latching Alarm Threshold
% of breaker size
AV105
x
x
x
Percent
1
174
Non-Latching High Threshold
% of breaker size
AV106
x
x
x
Percent
1
175
Non-Latching Low Threshold
% of breaker size
AV107
x
x
x
Percent
1
176
Non-Latching Hysteresis (0-100%)
Non-Latching Hysteresis (% of setpoint)
AV108
x
x
x
Percent
1
177
Branch 1 Alarm Status
Write 0 to alarm bits to clear alarms
AV109
x
x
x
No-Units
1
178
Branch 2 Alarm Status
Write 0 to alarm bits to clear alarms
AV110
x
x
x
No-Units
1
179
Branch 3 Alarm Status
Write 0 to alarm bits to clear alarms
AV111
x
x
x
No-Units
1
180
Branch 4 Alarm Status
Write 0 to alarm bits to clear alarms
AV112
x
x
x
No-Units
1
181
Branch 5 Alarm Status
Write 0 to alarm bits to clear alarms
AV113
x
x
x
No-Units
1
182
Branch 6 Alarm Status
Write 0 to alarm bits to clear alarms
AV114
x
x
x
No-Units
1
183
Branch 7 Alarm Status
Write 0 to alarm bits to clear alarms
AV115
x
x
x
No-Units
1
184
Branch 8 Alarm Status
Write 0 to alarm bits to clear alarms
AV116
x
x
x
No-Units
1
185
Branch 9 Alarm Status
Write 0 to alarm bits to clear alarms
AV117
x
x
x
No-Units
1
186
Branch 10 Alarm Status
Write 0 to alarm bits to clear alarms
AV118
x
x
x
No-Units
1
187
Branch 11 Alarm Status
Write 0 to alarm bits to clear alarms
AV119
x
x
x
No-Units
1
188
Branch 12 Alarm Status
Write 0 to alarm bits to clear alarms
AV120
x
x
x
No-Units
1
189
Branch 13 Alarm Status
Write 0 to alarm bits to clear alarms
AV121
x
x
x
No-Units
1
190
Branch 14 Alarm Status
Write 0 to alarm bits to clear alarms
AV122
x
x
x
No-Units
1
191
Branch 15 Alarm Status
Write 0 to alarm bits to clear alarms
AV123
x
x
x
No-Units
1
192
Branch 16 Alarm Status
Write 0 to alarm bits to clear alarms
AV124
x
x
x
No-Units
1
193
Branch 17 Alarm Status
Write 0 to alarm bits to clear alarms
AV125
x
x
x
No-Units
1
194
Branch 18 Alarm Status
Write 0 to alarm bits to clear alarms
AV126
x
x
x
No-Units
1
195
Branch 19 Alarm Status
Write 0 to alarm bits to clear alarms
AV127
x
x
x
No-Units
1
196
Branch 20 Alarm Status
Write 0 to alarm bits to clear alarms
AV128
x
x
x
No-Units
1
197
Branch 21 Alarm Status
Write 0 to alarm bits to clear alarms
AV129
x
x
x
No-Units
1
198
Data Variable
ZL0135-0A
Description
Page 97 of 162
Modbus
Address
Comments
“Latching Alarms are cleared by
writing a 0 to it’s alarm bit.
A write to a Non-Latching alarm
is ignored
Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state
declared (1=OFF; ON state must
have been achieved prior)
Bit 5-7: Reserved for future use
(reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use
(reads 0)”
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Branch 22 Alarm Status
Write 0 to alarm bits to clear alarms
AV130
x
x
x
No-Units
1
199
Branch 23 Alarm Status
Write 0 to alarm bits to clear alarms
AV131
x
x
x
No-Units
1
200
Branch 24 Alarm Status
Write 0 to alarm bits to clear alarms
AV132
x
x
x
No-Units
1
201
Branch 25 Alarm Status
Write 0 to alarm bits to clear alarms
AV133
x
x
x
No-Units
1
202
Branch 26 Alarm Status
Write 0 to alarm bits to clear alarms
AV134
x
x
x
No-Units
1
203
Branch 27 Alarm Status
Write 0 to alarm bits to clear alarms
AV135
x
x
x
No-Units
1
204
Branch 28 Alarm Status
Write 0 to alarm bits to clear alarms
AV136
x
x
x
No-Units
1
205
Branch 29 Alarm Status
Write 0 to alarm bits to clear alarms
AV137
x
x
x
No-Units
1
206
Branch 30 Alarm Status
Write 0 to alarm bits to clear alarms
AV138
x
x
x
No-Units
1
207
Branch 31 Alarm Status
Write 0 to alarm bits to clear alarms
AV139
x
x
x
No-Units
1
208
Branch 32 Alarm Status
Write 0 to alarm bits to clear alarms
AV140
x
x
x
No-Units
1
209
Branch 33 Alarm Status
Write 0 to alarm bits to clear alarms
AV141
x
x
x
No-Units
1
210
Branch 34 Alarm Status
Write 0 to alarm bits to clear alarms
AV142
x
x
x
No-Units
1
211
Branch 35 Alarm Status
Write 0 to alarm bits to clear alarms
AV143
x
x
x
No-Units
1
212
Branch 36 Alarm Status
Write 0 to alarm bits to clear alarms
AV144
x
x
x
No-Units
1
213
Branch 37 Alarm Status
Write 0 to alarm bits to clear alarms
AV145
x
x
x
No-Units
1
214
Branch 38 Alarm Status
Write 0 to alarm bits to clear alarms
AV146
x
x
x
No-Units
1
215
Branch 39 Alarm Status
Write 0 to alarm bits to clear alarms
AV147
x
x
x
No-Units
1
216
Branch 40 Alarm Status
Write 0 to alarm bits to clear alarms
AV148
x
x
x
No-Units
1
217
Branch 41 Alarm Status
Write 0 to alarm bits to clear alarms
AV149
x
x
x
No-Units
1
218
Branch 42 Alarm Status
Write 0 to alarm bits to clear alarms
AV150
x
x
x
No-Units
1
219
AUX Channel (phase 1) Alarm Status
Write 0 to alarm bits to clear alarms
AV151
x
x
x
No-Units
1
220
AUX Channel (phase 2) Alarm Status
Write 0 to alarm bits to clear alarms
AV152
x
x
x
No-Units
1
221
AUX Channel (phase 3) Alarm Status
Write 0 to alarm bits to clear alarms
AV153
x
x
x
No-Units
1
222
AUX Channel (Neutral) Alarm Status
Write 0 to alarm bits to clear alarms
AV154
x
x
x
No-Units
1
223
Overvoltage Alarm Timer
Alarm event duration threshold
AV155
x
x
x
Seconds
1
236
Controls entry into Overvoltage
alarm state. A return to a nonalarm state is instantaneous. All
channels use these same global
timers. Note that the parameter
measurement update rate is 1.6
secs, which will limit the effective
resolution of these timers.
Undervoltage Alarm Timer
Alarm event duration threshold
AV156
x
x
x
Seconds
1
237
Controls entry into Undervoltage
alarm state. A return to a nonalarm state is instantaneous. All
channels use these same global
timers. Note that the parameter
measurement update rate is 1.6
secs, which will limit the effective
resolution of these timers.
Overvoltage Alarm Threshold
Overvoltage level threshold (0=OFF)
AV157
x
x
x
Volts
5
238
Data Variable
ZL0135-0A
Description
Page 98 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Undervoltage Alarm Threshold
Undervoltage level threshold (0=OFF)
AV158
x
x
x
Volts
5
239
Voltage Alarm Hysteresis
Voltage Alarm Hysteresis (% of setpoint)
AV159
x
x
x
Percent
1
240
Percentage of setpoint
Voltage 1 Alarm Status
Write 0 to alarm bits to clear alarms
AV160
x
x
x
No-Units
1
241
“Latching Alarms are cleared by
writing a 0 to it’s alarm bit.
A write to a Non-Latching alarm
is ignored
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use
(reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use
(reads 0)”
Voltage 2 Alarm Status
Write 0 to alarm bits to clear alarms
AV161
x
x
x
No-Units
1
242
“Latching Alarms are cleared by
writing a 0 to it’s alarm bit.
A write to a Non-Latching alarm
is ignored
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use
(reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use
(reads 0)”
Voltage 3 Alarm Status
Write 0 to alarm bits to clear alarms
AV162
x
x
x
No-Units
1
243
“Latching Alarms are cleared by
writing a 0 to it’s alarm bit.
A write to a Non-Latching alarm
is ignored
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use
(reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use
(reads 0)”
Power Up Counter
Power Up Counter
AV163
x
x
x
No-Units
1
531
Number of Power-up cycles (write
0 to reset)
User Defined Status Register
1 in bit 0 enables CT phase assignment
AV164
x
x
No-Units
1
62017
“User Defined Status Register:
Bit 0: Enable User CT Phase
Assignment
Bit 1-15: Reserved”
Voltage Phase for Branch Channel 1
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV165
x
x
No-Units
1
62116
“Write the listed value to assign
this channel to the corresponding
voltage phase:
0 = phase-1 (A)
1 = phase-2 (B)
2 = phase-3 (C)”
Voltage Phase for Branch Channel 2
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV166
x
x
No-Units
1
62117
Data Variable
ZL0135-0A
Description
Page 99 of 162
Units
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
FW> = V1.203
1.016-1.022
Voltage Phase for Branch Channel 3
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV167
x
x
No-Units
1
62118
Voltage Phase for Branch Channel 4
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV168
x
x
No-Units
1
62119
Voltage Phase for Branch Channel 5
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV169
x
x
No-Units
1
62120
Voltage Phase for Branch Channel 6
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV170
x
x
No-Units
1
62121
Voltage Phase for Branch Channel 7
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV171
x
x
No-Units
1
62122
Voltage Phase for Branch Channel 8
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV172
x
x
No-Units
1
62123
Voltage Phase for Branch Channel 9
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV173
x
x
No-Units
1
62124
Voltage Phase for Branch Channel 10
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV174
x
x
No-Units
1
62125
Voltage Phase for Branch Channel 11
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV175
x
x
No-Units
1
62126
Voltage Phase for Branch Channel 12
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV176
x
x
No-Units
1
62127
Voltage Phase for Branch Channel 13
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV177
x
x
No-Units
1
62128
Voltage Phase for Branch Channel 14
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV178
x
x
No-Units
1
62129
Voltage Phase for Branch Channel 15
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV179
x
x
No-Units
1
62130
Voltage Phase for Branch Channel 16
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV180
x
x
No-Units
1
62131
Voltage Phase for Branch Channel 17
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV181
x
x
No-Units
1
62132
Voltage Phase for Branch Channel 18
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV182
x
x
No-Units
1
62133
Voltage Phase for Branch Channel 19
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV183
x
x
No-Units
1
62134
Voltage Phase for Branch Channel 20
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV184
x
x
No-Units
1
62135
Voltage Phase for Branch Channel 21
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV185
x
x
No-Units
1
62136
Voltage Phase for Branch Channel 22
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV186
x
x
No-Units
1
62137
Voltage Phase for Branch Channel 23
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV187
x
x
No-Units
1
62138
Voltage Phase for Branch Channel 24
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV188
x
x
No-Units
1
62139
Voltage Phase for Branch Channel 25
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV189
x
x
No-Units
1
62140
Data Variable
ZL0135-0A
Description
Page 100 of 162
FW < V1.016
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
FW> = V1.203
1.016-1.022
Voltage Phase for Branch Channel 26
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV190
x
x
No-Units
1
62141
Voltage Phase for Branch Channel 27
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV191
x
x
No-Units
1
62142
Voltage Phase for Branch Channel 28
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV192
x
x
No-Units
1
62143
Voltage Phase for Branch Channel 29
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV193
x
x
No-Units
1
62144
Voltage Phase for Branch Channel 30
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV194
x
x
No-Units
1
62145
Voltage Phase for Branch Channel 31
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV195
x
x
No-Units
1
62146
Voltage Phase for Branch Channel 32
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV196
x
x
No-Units
1
62147
Voltage Phase for Branch Channel 33
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV197
x
x
No-Units
1
62148
Voltage Phase for Branch Channel 34
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV198
x
x
No-Units
1
62149
Voltage Phase for Branch Channel 35
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV199
x
x
No-Units
1
62150
Voltage Phase for Branch Channel 36
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV200
x
x
No-Units
1
62151
Voltage Phase for Branch Channel 37
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV201
x
x
No-Units
1
62152
Voltage Phase for Branch Channel 38
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV202
x
x
No-Units
1
62153
Voltage Phase for Branch Channel 39
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV203
x
x
No-Units
1
62154
Voltage Phase for Branch Channel 40
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV204
x
x
No-Units
1
62155
Voltage Phase for Branch Channel 41
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV205
x
x
No-Units
1
62156
Voltage Phase for Branch Channel 42
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV206
x
x
No-Units
1
62157
Voltage Phase for Aux Channel 1
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV207
x
x
No-Units
1
62158
Voltage Phase for Aux Channel 2
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV208
x
x
No-Units
1
62159
Voltage Phase for Aux Channel 3
0=phase-1/A, 1=phase-2/B, 2=phase3/C
AV209
x
x
No-Units
1
62160
Data Variable
ZL0135-0A
Description
Page 101 of 162
FW < V1.016
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Logical Circuit Number for Branch
Channel 1
FW < V1.016
x
1.016-1.022
AV210
Units
COV Increment
Logical Circuit for Branch Channel 1
Description
FW> = V1.203
Data Variable
BACnet Object
E3xA/E
No-Units
1
Modbus
Address
62068
Comments
“Write a value (from 1-46) to assign
this channel to the corresponding
Logical Meter:
Write a zero to remove this
channel from a Logical Meter
assingment
invalid values will not be written
(a Logical Meter can only contain
up to 3 channels, multiple
channels in a Logical Meter must
must be adjacent branches on the
same CT strip or adapter board.)”
Logical Circuit for Branch Channel 2
Logical Circuit Number for Branch
Channel 2
AV211
x
No-Units
1
62069
Logical Circuit for Branch Channel 3
Logical Circuit Number for Branch
Channel 3
AV212
x
No-Units
1
62070
Logical Circuit for Branch Channel 4
Logical Circuit Number for Branch
Channel 4
AV213
x
No-Units
1
62071
Logical Circuit for Branch Channel 5
Logical Circuit Number for Branch
Channel 5
AV214
x
No-Units
1
62072
Logical Circuit for Branch Channel 6
Logical Circuit Number for Branch
Channel 6
AV215
x
No-Units
1
62073
Logical Circuit for Branch Channel 7
Logical Circuit Number for Branch
Channel 7
AV216
x
No-Units
1
62074
Logical Circuit for Branch Channel 8
Logical Circuit Number for Branch
Channel 8
AV217
x
No-Units
1
62075
Logical Circuit for Branch Channel 9
Logical Circuit Number for Branch
Channel 9
AV218
x
No-Units
1
62076
Logical Circuit for Branch Channel 10
Logical Circuit Number for Branch
Channel 10
AV219
x
No-Units
1
62077
Logical Circuit for Branch Channel 11
Logical Circuit Number for Branch
Channel 11
AV220
x
No-Units
1
62078
Logical Circuit for Branch Channel 12
Logical Circuit Number for Branch
Channel 12
AV221
x
No-Units
1
62079
Logical Circuit for Branch Channel 13
Logical Circuit Number for Branch
Channel 13
AV222
x
No-Units
1
62080
Logical Circuit for Branch Channel 14
Logical Circuit Number for Branch
Channel 14
AV223
x
No-Units
1
62081
Logical Circuit for Branch Channel 15
Logical Circuit Number for Branch
Channel 15
AV224
x
No-Units
1
62082
Logical Circuit for Branch Channel 16
Logical Circuit Number for Branch
Channel 16
AV225
x
No-Units
1
62083
Logical Circuit for Branch Channel 17
Logical Circuit Number for Branch
Channel 17
AV226
x
No-Units
1
62084
Logical Circuit for Branch Channel 18
Logical Circuit Number for Branch
Channel 18
AV227
x
No-Units
1
62085
ZL0135-0A
Page 102 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Logical Circuit Number for Branch
Channel 19
AV228
x
No-Units
1
62086
Logical Circuit for Branch Channel 20
Logical Circuit Number for Branch
Channel 20
AV229
x
No-Units
1
62087
Logical Circuit for Branch Channel 21
Logical Circuit Number for Branch
Channel 21
AV230
x
No-Units
1
62088
Logical Circuit for Branch Channel 22
Logical Circuit Number for Branch
Channel 22
AV231
x
No-Units
1
62089
Logical Circuit for Branch Channel 23
Logical Circuit Number for Branch
Channel 23
AV232
x
No-Units
1
62090
Logical Circuit for Branch Channel 24
Logical Circuit Number for Branch
Channel 24
AV233
x
No-Units
1
62091
Logical Circuit for Branch Channel 25
Logical Circuit Number for Branch
Channel 25
AV234
x
No-Units
1
62092
Logical Circuit for Branch Channel 26
Logical Circuit Number for Branch
Channel 26
AV235
x
No-Units
1
62093
Logical Circuit for Branch Channel 27
Logical Circuit Number for Branch
Channel 27
AV236
x
No-Units
1
62094
Logical Circuit for Branch Channel 28
Logical Circuit Number for Branch
Channel 28
AV237
x
No-Units
1
62095
Logical Circuit for Branch Channel 29
Logical Circuit Number for Branch
Channel 29
AV238
x
No-Units
1
62096
Logical Circuit for Branch Channel 30
Logical Circuit Number for Branch
Channel 30
AV239
x
No-Units
1
62097
Logical Circuit for Branch Channel 31
Logical Circuit Number for Branch
Channel 31
AV240
x
No-Units
1
62098
Logical Circuit for Branch Channel 32
Logical Circuit Number for Branch
Channel 32
AV241
x
No-Units
1
62099
Logical Circuit for Branch Channel 33
Logical Circuit Number for Branch
Channel 33
AV242
x
No-Units
1
62100
Logical Circuit for Branch Channel 34
Logical Circuit Number for Branch
Channel 34
AV243
x
No-Units
1
62101
Logical Circuit for Branch Channel 35
Logical Circuit Number for Branch
Channel 35
AV244
x
No-Units
1
62102
Logical Circuit for Branch Channel 36
Logical Circuit Number for Branch
Channel 36
AV245
x
No-Units
1
62103
Logical Circuit for Branch Channel 37
Logical Circuit Number for Branch
Channel 37
AV246
x
No-Units
1
62104
Logical Circuit for Branch Channel 38
Logical Circuit Number for Branch
Channel 38
AV247
x
No-Units
1
62105
Logical Circuit for Branch Channel 39
Logical Circuit Number for Branch
Channel 39
AV248
x
No-Units
1
62106
Logical Circuit for Branch Channel 40
Logical Circuit Number for Branch
Channel 40
AV249
x
No-Units
1
62107
Logical Circuit for Branch Channel 41
Logical Circuit Number for Branch
Channel 41
AV250
x
No-Units
1
62108
ZL0135-0A
Description
Page 103 of 162
FW < V1.016
FW> = V1.203
Logical Circuit for Branch Channel 19
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Logical Circuit Number for Branch
Channel 42
AV251
x
No-Units
1
62109
Logical Circuit for Aux Channel 1
Logical Circuit Number for Aux Channel 1 AV252
x
No-Units
1
62110
Logical Circuit for Aux Channel 2
Logical Circuit Number for Aux Channel 2 AV253
x
No-Units
1
62111
Logical Circuit for Aux Channel 3
Logical Circuit Number for Aux Channel 3 AV254
x
No-Units
1
62112
Latching Alarm Status: Logical Ckt 1
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
x
No-Units
0
10060
Description
AV255
FW < V1.016
FW> = V1.203
Logical Circuit for Branch Channel 42
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
“Latching Alarms are cleared by
writing a 0 to it’s alarm bit.
Clearing the Latching Alarm of
a Logical Meter also clears the
corresponding Latching Alarms of
the branches assigned to it:
Bit 0: High-High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low-Low Non-Latching
Alarm
Bit 4: Latching Alarm State (1 =
OFF)
Bit 5-15: Reserved for future use
(these read 0)”
Latching Alarm Status: Logical Ckt 2
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV256
x
No-Units
0
11060
Latching Alarm Status: Logical Ckt 3
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV257
x
No-Units
0
12060
Latching Alarm Status: Logical Ckt 4
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV258
x
No-Units
0
13060
Latching Alarm Status: Logical Ckt 5
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV259
x
No-Units
0
14060
Latching Alarm Status: Logical Ckt 6
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV260
x
No-Units
0
15060
Latching Alarm Status: Logical Ckt 7
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV261
x
No-Units
0
16060
Latching Alarm Status: Logical Ckt 8
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV262
x
No-Units
0
17060
Latching Alarm Status: Logical Ckt 9
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV263
x
No-Units
0
18060
Latching Alarm Status: Logical Ckt 10
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV264
x
No-Units
0
19060
Latching Alarm Status: Logical Ckt 11
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV265
x
No-Units
0
20060
Latching Alarm Status: Logical Ckt 12
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV266
x
No-Units
0
21060
Latching Alarm Status: Logical Ckt 13
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV267
x
No-Units
0
22060
Latching Alarm Status: Logical Ckt 14
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV268
x
No-Units
0
23060
ZL0135-0A
Page 104 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
AV269
x
No-Units
0
24060
AV270
x
No-Units
0
25060
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV271
x
No-Units
0
26060
Latching Alarm Status: Logical Ckt 18
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV272
x
No-Units
0
27060
Latching Alarm Status: Logical Ckt 19
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV273
x
No-Units
0
28060
Latching Alarm Status: Logical Ckt 20
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV274
x
No-Units
0
29060
Latching Alarm Status: Logical Ckt 21
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV275
x
No-Units
0
30060
Latching Alarm Status: Logical Ckt 22
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV276
x
No-Units
0
31060
Latching Alarm Status: Logical Ckt 23
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV277
x
No-Units
0
32060
Latching Alarm Status: Logical Ckt 24
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV278
x
No-Units
0
33060
Latching Alarm Status: Logical Ckt 25
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV279
x
No-Units
0
34060
Latching Alarm Status: Logical Ckt 26
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV280
x
No-Units
0
35060
Latching Alarm Status: Logical Ckt 27
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV281
x
No-Units
0
36060
Latching Alarm Status: Logical Ckt 28
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV282
x
No-Units
0
37060
Latching Alarm Status: Logical Ckt 29
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV283
x
No-Units
0
38060
Latching Alarm Status: Logical Ckt 30
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV284
x
No-Units
0
39060
Latching Alarm Status: Logical Ckt 31
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV285
x
No-Units
0
40060
Latching Alarm Status: Logical Ckt 32
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV286
x
No-Units
0
41060
Latching Alarm Status: Logical Ckt 33
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV287
x
No-Units
0
42060
Latching Alarm Status: Logical Ckt 34
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV288
x
No-Units
0
43060
Latching Alarm Status: Logical Ckt 35
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV289
x
No-Units
0
44060
Latching Alarm Status: Logical Ckt 36
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV290
x
No-Units
0
45060
Description
Latching Alarm Status: Logical Ckt 15
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
Latching Alarm Status: Logical Ckt 16
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
Latching Alarm Status: Logical Ckt 17
ZL0135-0A
Page 105 of 162
FW < V1.016
FW> = V1.203
Units
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
COV Increment
AV291
x
No-Units
0
46060
AV292
x
No-Units
0
47060
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV293
x
No-Units
0
48060
Latching Alarm Status: Logical Ckt 30
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV294
x
No-Units
0
49060
Latching Alarm Status: Logical Ckt 41
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV295
x
No-Units
0
50060
Latching Alarm Status: Logical Ckt 42
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV296
x
No-Units
0
51060
Latching Alarm Status: Logical Ckt 43
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV297
x
No-Units
0
52060
Latching Alarm Status: Logical Ckt 44
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV298
x
No-Units
0
53060
Latching Alarm Status: Logical Ckt 45
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV299
x
No-Units
0
54060
Latching Alarm Status: Logical Ckt 46
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
AV300
x
No-Units
0
55060
AUX Resets: Write value to reset
10203=kWh, 29877=Max Current &
Max kW
AO1
No-Units
1
294
“Write the listed value to perform
the corresponding reset:
10203 = Clear KWH value to zero
29877 = Clear Max Current and
Max KW values to zero”
Global Resets: Write value to reset
10203=kWh, others…
AO2
No-Units
1
295
“Write the listed value to perform
the corresponding reset:
26012 = Begin new Demand
Sub-interval
26013 = Reset Demand
31010 = Reset all Latching Alarms
10203 = Clear all KWH values
to zero
29877 = Clear all Max Current and
Max KW values to zero
20097 = Clear all Max Demand
values to zero”
Channel 1 Reset
10203=kWh, 29877=Max Current &
Max kW
AO3
x
x
x
No-Units
1
1126
“Write the listed value to perform
the corresponding reset:
10203 = Clear KWH value to zero
29877 = Clear Max Current and
Max KW values to zero”
Channel 2 Reset
10203=kWh, 29877=Max Current &
Max kW
AO4
x
x
x
No-Units
1
1127
Channel 3 Reset
10203=kWh, 29877=Max Current &
Max kW
AO5
x
x
x
No-Units
1
1128
Channel 4 Reset
10203=kWh, 29877=Max Current &
Max kW
AO6
x
x
x
No-Units
1
1129
Description
Latching Alarm Status: Logical Ckt 37
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
Latching Alarm Status: Logical Ckt 38
bitmap: (0=HH;1=H;2=L;3=LL;4=State
[1=OFF*];5-15=Rsv)
Latching Alarm Status: Logical Ckt 39
FW < V1.016
FW> = V1.203
Units
Data Variable
1.016-1.022
BACnet Object
E3xA/E
Modbus
Address
Comments
Analog_Output Objects
ZL0135-0A
Page 106 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Channel 5 Reset
10203=kWh, 29877=Max Current &
Max kW
AO7
x
x
x
No-Units
1
1130
Channel 6 Reset
10203=kWh, 29877=Max Current &
Max kW
AO8
x
x
x
No-Units
1
1131
Channel 7 Reset
10203=kWh, 29877=Max Current &
Max kW
AO9
x
x
x
No-Units
1
1132
Channel 8 Reset
10203=kWh, 29877=Max Current &
Max kW
AO10
x
x
x
No-Units
1
1133
Channel 9 Reset
10203=kWh, 29877=Max Current &
Max kW
AO11
x
x
x
No-Units
1
1134
Channel 10 Reset
10203=kWh, 29877=Max Current &
Max kW
AO12
x
x
x
No-Units
1
1135
Channel 11 Reset
10203=kWh, 29877=Max Current &
Max kW
AO13
x
x
x
No-Units
1
1136
Channel 12 Reset
10203=kWh, 29877=Max Current &
Max kW
AO14
x
x
x
No-Units
1
1137
Channel 13 Reset
10203=kWh, 29877=Max Current &
Max kW
AO15
x
x
x
No-Units
1
1138
Channel 14 Reset
10203=kWh, 29877=Max Current &
Max kW
AO16
x
x
x
No-Units
1
1139
Channel 15 Reset
10203=kWh, 29877=Max Current &
Max kW
AO17
x
x
x
No-Units
1
1140
Channel 16 Reset
10203=kWh, 29877=Max Current &
Max kW
AO18
x
x
x
No-Units
1
1141
Channel 17 Reset
10203=kWh, 29877=Max Current &
Max kW
AO19
x
x
x
No-Units
1
1142
Channel 18 Reset
10203=kWh, 29877=Max Current &
Max kW
AO20
x
x
x
No-Units
1
1143
Channel 19 Reset
10203=kWh, 29877=Max Current &
Max kW
AO21
x
x
x
No-Units
1
1144
Channel 20 Reset
10203=kWh, 29877=Max Current &
Max kW
AO22
x
x
x
No-Units
1
1145
Channel 21 Reset
10203=kWh, 29877=Max Current &
Max kW
AO23
x
x
x
No-Units
1
1146
Channel 22 Reset
10203=kWh, 29877=Max Current &
Max kW
AO24
x
x
x
No-Units
1
1147
Channel 23 Reset
10203=kWh, 29877=Max Current &
Max kW
AO25
x
x
x
No-Units
1
1148
Channel 24 Reset
10203=kWh, 29877=Max Current &
Max kW
AO26
x
x
x
No-Units
1
1149
Channel 25 Reset
10203=kWh, 29877=Max Current &
Max kW
AO27
x
x
x
No-Units
1
1150
Channel 26 Reset
10203=kWh, 29877=Max Current &
Max kW
AO28
x
x
x
No-Units
1
1151
Channel 27 Reset
10203=kWh, 29877=Max Current &
Max kW
AO29
x
x
x
No-Units
1
1152
Data Variable
ZL0135-0A
Description
Page 107 of 162
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
BACnet Object
FW> = V1.203
1.016-1.022
FW < V1.016
E3xA/E
COV Increment
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
Units
Channel 28 Reset
10203=kWh, 29877=Max Current &
Max kW
AO30
x
x
x
No-Units
1
1153
Channel 29 Reset
10203=kWh, 29877=Max Current &
Max kW
AO31
x
x
x
No-Units
1
1154
Channel 30 Reset
10203=kWh, 29877=Max Current &
Max kW
AO32
x
x
x
No-Units
1
1155
Channel 31 Reset
10203=kWh, 29877=Max Current &
Max kW
AO33
x
x
x
No-Units
1
1156
Channel 32 Reset
10203=kWh, 29877=Max Current &
Max kW
AO34
x
x
x
No-Units
1
1157
Channel 33 Reset
10203=kWh, 29877=Max Current &
Max kW
AO35
x
x
x
No-Units
1
1158
Channel 34 Reset
10203=kWh, 29877=Max Current &
Max kW
AO36
x
x
x
No-Units
1
1159
Channel 35 Reset
10203=kWh, 29877=Max Current &
Max kW
AO37
x
x
x
No-Units
1
1160
Channel 36 Reset
10203=kWh, 29877=Max Current &
Max kW
AO38
x
x
x
No-Units
1
1161
Channel 37 Reset
10203=kWh, 29877=Max Current &
Max kW
AO39
x
x
x
No-Units
1
1162
Channel 38 Reset
10203=kWh, 29877=Max Current &
Max kW
AO40
x
x
x
No-Units
1
1163
Channel 39 Reset
10203=kWh, 29877=Max Current &
Max kW
AO41
x
x
x
No-Units
1
1164
Channel 40 Reset
10203=kWh, 29877=Max Current &
Max kW
AO42
x
x
x
No-Units
1
1165
Channel 41 Reset
10203=kWh, 29877=Max Current &
Max kW
AO43
x
x
x
No-Units
1
1166
Channel 42 Reset
10203=kWh, 29877=Max Current &
Max kW
AO44
x
x
x
No-Units
1
1167
Logical Ckt 1: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO45
x
No-Units
0
10057
Logical Ckt 2: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO46
x
No-Units
0
11057
Logical Ckt 3: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO47
x
No-Units
0
12057
Logical Ckt 4: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO48
x
No-Units
0
13057
Data Variable
ZL0135-0A
Description
Page 108 of 162
Modbus
Address
Comments
“Write the listed value to perform
the corresponding reset:
10203 = Clear KWH value to zero
29877 = Clear Max Current and
Max KW values to zero
20097 = Clear Max Demand;
31010 = Clear Latching Alarms”
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO49
x
No-Units
0
14057
Logical Ckt 6: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO50
x
No-Units
0
15057
Logical Ckt 7: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO51
x
No-Units
0
16057
Logical Ckt 8: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO52
x
No-Units
0
17057
Logical Ckt 9: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO53
x
No-Units
0
18057
Logical Ckt 10: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO54
x
No-Units
0
19057
Logical Ckt 11: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO55
x
No-Units
0
20057
Logical Ckt 12: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO56
x
No-Units
0
21057
Logical Ckt 13: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO57
x
No-Units
0
22057
Logical Ckt 14: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO58
x
No-Units
0
23057
Logical Ckt 15: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO59
x
No-Units
0
24057
Logical Ckt 16: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO60
x
No-Units
0
25057
Logical Ckt 17: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO61
x
No-Units
0
26057
Logical Ckt 18: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO62
x
No-Units
0
27057
Logical Ckt 19: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO63
x
No-Units
0
28057
Logical Ckt 20: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO64
x
No-Units
0
29057
ZL0135-0A
Description
Page 109 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 5: Reset (1 of 6 values)
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO65
x
No-Units
0
30057
Logical Ckt 22: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO66
x
No-Units
0
31057
Logical Ckt 23: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO67
x
No-Units
0
32057
Logical Ckt 24: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO68
x
No-Units
0
33057
Logical Ckt 25: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO69
x
No-Units
0
34057
Logical Ckt 26: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO70
x
No-Units
0
35057
Logical Ckt 27: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO71
x
No-Units
0
36057
Logical Ckt 28: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO72
x
No-Units
0
37057
Logical Ckt 29: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO73
x
No-Units
0
38057
Logical Ckt 30: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO74
x
No-Units
0
39057
Logical Ckt 31: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO75
x
No-Units
0
40057
Logical Ckt 32: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO76
x
No-Units
0
41057
Logical Ckt 33: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO77
x
No-Units
0
42057
Logical Ckt 34: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO78
x
No-Units
0
43057
Logical Ckt 35: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO79
x
No-Units
0
44057
Logical Ckt 36: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO80
x
No-Units
0
45057
ZL0135-0A
Description
Page 110 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 21: Reset (1 of 6 values)
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xAxxxx and E3xExxx Branch Circuit Power Meters, cont.
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO81
x
No-Units
0
46057
Logical Ckt 38: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO82
x
No-Units
0
47057
Logical Ckt 39: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO83
x
No-Units
0
48057
Logical Ckt 30: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO84
x
No-Units
0
49057
Logical Ckt 41: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO85
x
No-Units
0
50057
Logical Ckt 42: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO86
x
No-Units
0
51057
Logical Ckt 43: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO87
x
No-Units
0
52057
Logical Ckt 44: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO88
x
No-Units
0
53057
Logical Ckt 45: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO89
x
No-Units
0
54057
Logical Ckt 46: Reset (1 of 6 values)
10203=kWh; 29877=Max Amps&KW;
20097=Max Dmnd; 31010=Latching
Alarms
AO90
x
No-Units
0
55057
ZL0135-0A
Description
Page 111 of 162
FW < V1.016
FW> = V1.203
Logical Ckt 37: Reset (1 of 6 values)
Data Variable
1.016-1.022
BACnet Object
Units
COV Increment
E3xA/E
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters
The E3xBxxx meters have 446 data objects per Modbus address and operate at 9600, 19200 or 38400 baud. These meters monitor current on 42 branch circuits and 4 main
circuits (up to 3 phases, plus neutral), power, demand, and energy on the main channels (not the branches) for each Modbus address. The E30Bx42 models have one Modbus
address and support only 42 branch channels (plus main channels). The E30Bx84 models and all E31Bxxx models have two Modbus addresses and support up to 84 branch
channels and two sets of main channels.
AV4-AV45 are not writable on E30Bxxx solid-core models because the CT size is fixed (at 100 A). Other values written revert to 100 A the next time the meter is scanned. AV4AV45 are writable on E31Bxxx split-core models.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_Input Objects
Frequency: (derived from Frequency (derived from
Phase A)
Phase A)
AI1
Hz
0.01
600/601
VOLTS L-N: 3ph Ave
Voltage L-L - average of
active phases
AI2
Volts
5
602/603
VOLTS L-L: 3ph Ave
Voltage L-N - average of
active phases
AI3
Volts
5
604/605
VOLTS A-N
Instantaneous Voltage
Ph-A to Neutral
AI4
Volts
5
606/607
VOLTS B-N
Instantaneous Voltage
Ph-B to Neutral
AI5
Volts
5
608/609
VOLTS C-N
Instantaneous Voltage
Ph-C to Neutral
AI6
Volts
5
610/611
VOLTS A-B
Instantaneous Voltage
Phase A to B
AI7
Volts
5
612/613
VOLTS B-C
Instantaneous Voltage
Phase B to C
AI8
Volts
5
614/615
VOLTS A-C
Instantaneous Voltage
Phase A to C
AI9
Volts
5
616/617
kWh Energy: 3ph Total
Real Energy - total of
active phases
AI10
kWh
0
618/619
kW: 3ph Total
Inst Real Power- total of
active phases
AI11
kW
1
620/621
Power Factor: 3ph Total
Inst Power Factor average of phases
AI12
PF
0.01
622/623
Amps: 3ph Average
(phases 1,2,3)
Inst Current- average of
active phases
AI13
Amps
5
624/625
kW: Phase 1
Instantaneous Real
Power - Phase 1
AI14
kW
1
626/627
kW: Phase 2
Instantaneous Real
Power - Phase 2
AI15
kW
1
628/629
kW: Phase 3
Instantaneous Real
Power - Phase 3
AI16
kW
1
630/631
Power Factor: Phase 1
Instantaneous Power
Factor - Phase A
AI17
PF
0.01
632/633
Power Factor: Phase 2
Instantaneous Power
Factor - Phase B
AI18
PF
0.01
634/635
Power Factor: Phase 3
Instantaneous Power
Factor - Phase C
AI19
PF
0.01
636/637
Amps: Phase 1
Instantaneous Current Phase 1
AI20
Amps
5
638/639
ZL0135-0A
Page 112 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Phase 2
Instantaneous Current Phase 2
AI21
Amps
5
640/641
Amps: Phase 3
Instantaneous Current Phase 3
AI22
Amps
5
642/643
Amps: Phase 4 (Neutral)
Instantaneous Neutral
Current
AI23
Amps
5
644/645
Amps Present Demand:
Phase 1
Present Current
Demand- Phase 1
AI24
Amps
5
646/647
Amps Present Demand:
Phase 2
Present Current Demand
- Phase 2
AI25
Amps
5
648/649
Amps Present Demand:
Phase 3
Present Current Demand
- Phase 3
AI26
Amps
5
650/651
Amps Present Demand:
Phase 4 (Neutral)
Present Current Demand
- Neutral
AI27
Amps
5
652/653
Amps Max Demand:
Phase 1
Max Current Demand Phase 1
AI28
Amps
5
654/655
Amps Max Demand:
Phase 2
Max Current Demand Phase 2
AI29
Amps
5
656/657
Amps Max Demand:
Phase 3
Max Current Demand Phase 3
AI30
Amps
5
658/659
Amps Max Demand:
Phase 4 (Neutral)
Max Current Demand Neutral
AI31
Amps
5
660/661
kW Present Demand:
3ph Total
Real Power Present
Demand - 3ph Total
AI32
kW
1
662/663
kW Max Demand: 3ph
Total
Real Power Max Demand AI33
- 3ph Total
kW
1
664/665
Max Amps: Phase 1
Max Instantaneous
Current - Phase 1
AI34
Amps
5
666/667
Max Amps: Phase 2
Max Instantaneous
Current - Phase 2
AI35
Amps
5
668/669
Max Amps: Phase 3
Max Instantaneous
Current - Phase 3
AI36
Amps
5
670/671
Max Amps: Phase 4
(Neutal)
Max Instantaneous
Neutral Current
AI37
Amps
5
672/673
kW: 3ph Max
Max Instantaneous Real
Power- 3ph Total
AI38
kW
1
674/675
Device Health
Bit Map of Device Health
Indicators
AI39
n/a
1
532
ZL0135-0A
Page 113 of 162
Comments
Bit 0: Reserved
Bit 1: Frequency Out of Range or insufficient voltage on Phase A to
determine frequency range. Frequency range is 40-70 Hz.
Bit 2: Phase A Voltage Clipping
Bit 3: Phase B Voltage Clipping
Bit 4: Phase C Voltage Clipping
Bit 5: Current Clipping on at least 1 channel (AUX & Circuit)
Bit 6-7: Reserved
Bit 8: Strip Connection Error
Bit 9-12: Reserved
Bit 13: Current Model, Model C
Bit 14: Power Model, Model B
Bit 15: Branch Power, Model A
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Reserved for future use
Reserved for future use
AI40
n/a
1
533
Reserved for future use
Reserved for future use
AI41
n/a
1
534
Reserved for future use
Reserved for future use
AI42
n/a
1
535
Reserved for future use
Reserved for future use
AI43
n/a
1
536
Reserved for future use
Reserved for future use
AI44
n/a
1
537
Reserved for future use
Reserved for future use
AI45
n/a
1
538
Product ID
bit Map of Model
configuration
AI46
n/a
1
539
kVA: 3ph Total
Instantaneous Apparent
Power- 3ph Total
AI47
kVA
1
676/677
kVA: Phase 1
Instantaneous Apparent
Power - Phase 1
AI48
kVA
1
678/679
kVA: Phase 2
Instantaneous Apparent
Power - Phase 2
AI49
kVA
1
680/681
kVA: Phase 3
Instantaneous Apparent
Power - Phase 3
AI50
kVA
1
682/683
Comments
Bit 0: Default Solid-Core
Bit 1: Default Split-Core
Bit 3-9: Reserved
Bit 10: Reserved
Bit 11: Reserved
Bit 12: Custom V-Phase Capable
Bit 13: Reserved (Model C)
Bit 14: Reserved (Model B)
Bit 15: Reserved (Model A)
Serial Number MSW
Serial Number MSW
AI51
n/a
1
1
Upper 16-bits of a 32-bit Hex Value
Serial Number LSW
Serial Number LSW
AI52
n/a
1
2
Lower 16-bits of a 32-bit Hex Value
Firmware Revision RS
Firmware Revision RS
AI53
n/a
1
3
Firmware Revision OS
Firmware Revision OS
AI54
n/a
1
4
Device ID:
15170=C, 15171=B,
15172=A
AI55
n/a
1
5
15170 = Model C, current only on all channels, no voltage
15171 = Model B, current only on branch channels, power on AUX
channels plus voltage
15172 = Model A, current and power on all channels plus voltage
Global Latching Alarm
Status
(HHL,HL,LL,LLL,ON,Rsv,R
sv,Rsv,HVL,LVL)
AI56
n/a
1
224
Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state declared (1=OFF; ON state must have
been achieved prior)
Bit 5-7: Reserved for future use (reads 0)
Bit 8: High Voltage Latching Alarm
Bit 9: Low Voltage Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Global Non-Latching
Alarm Status
(HL,LL,Rsv,Rsv,Rsv,Rsv,Rs AI57
v,Rsv,HVL,LVL)
n/a
1
225
Bit 0: High Non-Latching Alarm
Bit 1: Low Non-Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Voltage Non-Latching Alarm
Bit 9: Low Voltage Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
ZL0135-0A
Page 114 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
Global Most-Recent
Latching Alarm Chan
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
# of Most-Recent
Channel (0=none)
AI58
n/a
1
226
0-46, 0=none
Global Most-Recent Non- # of Most-Recent
Latching Alrm Ch
Channel (0=none)
AI59
n/a
1
227
0-46, 0=none
Total number of Latch
channels in alarm
# alarm chan (nonlatching alarms)
AI60
n/a
1
228
Total number of nonLatch chan in alarm
# alarm chan (based on
latching alarms)
AI61
n/a
1
229
Error Bitmap1
(placeholder - bits TBD)
Error Bitmap1
(placeholder - bits TBD)
AI62
n/a
1
230
Error Bitmap2
(placeholder - bits TBD)
Error Bitmap2
(placeholder - bits TBD)
AI63
n/a
1
231
Error Bitmap3
(placeholder - bits TBD)
Error Bitmap3
(placeholder - bits TBD)
AI64
n/a
1
232
Error Bitmap4
(placeholder - bits TBD)
Error Bitmap4
(placeholder - bits TBD)
AI65
n/a
1
233
Error Bitmap5
(placeholder - bits TBD)
Error Bitmap5
(placeholder - bits TBD)
AI66
n/a
1
234
Error Bitmap6
(placeholder - bits TBD)
Error Bitmap6
(placeholder - bits TBD)
AI67
n/a
1
235
Amps: Channel 1
Instantaneous Current Channel 1
AI68
Amps
5
2252/2253
Amps: Channel 2
Instantaneous Current Channel 2
AI69
Amps
5
2254/2255
Amps: Channel 3
Instantaneous Current Channel 3
AI70
Amps
5
2256/2257
Amps: Channel 4
Instantaneous Current Channel 4
AI71
Amps
5
2258/2259
Amps: Channel 5
Instantaneous Current Channel 5
AI72
Amps
5
2260/2261
Amps: Channel 6
Instantaneous Current Channel 6
AI73
Amps
5
2262/2263
Amps: Channel 7
Instantaneous Current Channel 7
AI74
Amps
5
2264/2265
Amps: Channel 8
Instantaneous Current Channel 8
AI75
Amps
5
2266/2267
Amps: Channel 9
Instantaneous Current Channel 9
AI76
Amps
5
2268/2269
Amps: Channel 10
Instantaneous Current Channel 10
AI77
Amps
5
2270/2271
Amps: Channel 11
Instantaneous Current Channel 11
AI78
Amps
5
2272/2273
Amps: Channel 12
Instantaneous Current Channel 12
AI79
Amps
5
2274/2275
Amps: Channel 13
Instantaneous Current Channel 13
AI80
Amps
5
2276/2277
Amps: Channel 14
Instantaneous Current Channel 14
AI81
Amps
5
2278/2279
ZL0135-0A
Page 115 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Channel 15
Instantaneous Current Channel 15
AI82
Amps
5
2280/2281
Amps: Channel 16
Instantaneous Current Channel 16
AI83
Amps
5
2282/2283
Amps: Channel 17
Instantaneous Current Channel 17
AI84
Amps
5
2284/2285
Amps: Channel 18
Instantaneous Current Channel 18
AI85
Amps
5
2286/2287
Amps: Channel 19
Instantaneous Current Channel 19
AI86
Amps
5
2288/2289
Amps: Channel 20
Instantaneous Current Channel 20
AI87
Amps
5
2290/2291
Amps: Channel 21
Instantaneous Current Channel 21
AI88
Amps
5
2292/2293
Amps: Channel 22
Instantaneous Current Channel 22
AI89
Amps
5
2294/2295
Amps: Channel 23
Instantaneous Current Channel 23
AI90
Amps
5
2296/2297
Amps: Channel 24
Instantaneous Current Channel 24
AI91
Amps
5
2298/2299
Amps: Channel 25
Instantaneous Current Channel 25
AI92
Amps
5
2300/2301
Amps: Channel 26
Instantaneous Current Channel 26
AI93
Amps
5
2302/2303
Amps: Channel 27
Instantaneous Current Channel 27
AI94
Amps
5
2304/2305
Amps: Channel 28
Instantaneous Current Channel 28
AI95
Amps
5
2306/2307
Amps: Channel 29
Instantaneous Current Channel 29
AI96
Amps
5
2308/2309
Amps: Channel 30
Instantaneous Current Channel 30
AI97
Amps
5
2310/2311
Amps: Channel 31
Instantaneous Current Channel 31
AI98
Amps
5
2312/2313
Amps: Channel 32
Instantaneous Current Channel 32
AI99
Amps
5
2314/2315
Amps: Channel 33
Instantaneous Current Channel 33
AI100
Amps
5
2316/2317
Amps: Channel 34
Instantaneous Current Channel 34
AI101
Amps
5
2318/2319
Amps: Channel 35
Instantaneous Current Channel 35
AI102
Amps
5
2320/2321
Amps: Channel 36
Instantaneous Current Channel 36
AI103
Amps
5
2322/2323
Amps: Channel 37
Instantaneous Current Channel 37
AI104
Amps
5
2324/2325
Amps: Channel 38
Instantaneous Current Channel 38
AI105
Amps
5
2326/2327
ZL0135-0A
Page 116 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Channel 39
Instantaneous Current Channel 39
AI106
Amps
5
2328/2329
Amps: Channel 40
Instantaneous Current Channel 40
AI107
Amps
5
2330/2331
Amps: Channel 41
Instantaneous Current Channel 41
AI108
Amps
5
2332/2333
Amps: Channel 42
Instantaneous Current Channel 42
AI109
Amps
5
2334/2335
Amps Present Demand:
Channel 1
Present Current Demand
- Channel 1
AI110
Amps
5
2504/2505
Amps Present Demand:
Channel 2
Present Current Demand
- Channel 2
AI111
Amps
5
2506/2507
Amps Present Demand:
Channel 3
Present Current Demand
- Channel 3
AI112
Amps
5
2508/2509
Amps Present Demand:
Channel 4
Present Current Demand
- Channel 4
AI113
Amps
5
2510/2511
Amps Present Demand:
Channel 5
Present Current Demand
- Channel 5
AI114
Amps
5
2512/2513
Amps Present Demand:
Channel 6
Present Current Demand
- Channel 6
AI115
Amps
5
2514/2515
Amps Present Demand:
Channel 7
Present Current Demand
- Channel 7
AI116
Amps
5
2516/2517
Amps Present Demand:
Channel 8
Present Current Demand
- Channel 8
AI117
Amps
5
2518/2519
Amps Present Demand:
Channel 9
Present Current Demand
- Channel 9
AI118
Amps
5
2520/2521
Amps Present Demand:
Channel 10
Present Current Demand
- Channel 10
AI119
Amps
5
2522/2523
Amps Present Demand:
Channel 11
Present Current Demand
- Channel 11
AI120
Amps
5
2524/2525
Amps Present Demand:
Channel 12
Present Current Demand
- Channel 12
AI121
Amps
5
2526/2527
Amps Present Demand:
Channel 13
Present Current Demand
- Channel 13
AI122
Amps
5
2528/2529
Amps Present Demand:
Channel 14
Present Current Demand
- Channel 14
AI123
Amps
5
2530/2531
Amps Present Demand:
Channel 15
Present Current Demand
- Channel 15
AI124
Amps
5
2532/2533
Amps Present Demand:
Channel 16
Present Current Demand
- Channel 16
AI125
Amps
5
2534/2535
Amps Present Demand:
Channel 17
Present Current Demand
- Channel 17
AI126
Amps
5
2536/2537
Amps Present Demand:
Channel 18
Present Current Demand
- Channel 18
AI127
Amps
5
2538/2539
Amps Present Demand:
Channel 19
Present Current Demand
- Channel 19
AI128
Amps
5
2540/2541
Amps Present Demand:
Channel 20
Present Current Demand
- Channel 20
AI129
Amps
5
2542/2543
ZL0135-0A
Page 117 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
Amps Present Demand:
Channel 21
Present Current Demand
- Channel 21
AI130
Amps
5
2544/2545
Amps Present Demand:
Channel 22
Present Current Demand
- Channel 22
AI131
Amps
5
2546/2547
Amps Present Demand:
Channel 23
Present Current Demand
- Channel 23
AI132
Amps
5
2548/2549
Amps Present Demand:
Channel 24
Present Current Demand
- Channel 24
AI133
Amps
5
2550/2551
Amps Present Demand:
Channel 25
Present Current Demand
- Channel 25
AI134
Amps
5
2552/2553
Amps Present Demand:
Channel 26
Present Current Demand
- Channel 26
AI135
Amps
5
2554/2555
Amps Present Demand:
Channel 27
Present Current Demand
- Channel 27
AI136
Amps
5
2556/2557
Amps Present Demand:
Channel 28
Present Current Demand
- Channel 28
AI137
Amps
5
2558/2559
Amps Present Demand:
Channel 29
Present Current Demand
- Channel 29
AI138
Amps
5
2560/2561
Amps Present Demand:
Channel 30
Present Current Demand
- Channel 30
AI139
Amps
5
2562/2563
Amps Present Demand:
Channel 31
Present Current Demand
- Channel 31
AI140
Amps
5
2564/2565
Amps Present Demand:
Channel 32
Present Current Demand
- Channel 32
AI141
Amps
5
2566/2567
Amps Present Demand:
Channel 33
Present Current Demand
- Channel 33
AI142
Amps
5
2568/2569
Amps Present Demand:
Channel 34
Present Current Demand
- Channel 34
AI143
Amps
5
2570/2571
Amps Present Demand:
Channel 35
Present Current Demand
- Channel 35
AI144
Amps
5
2572/2573
Amps Present Demand:
Channel 36
Present Current Demand
- Channel 36
AI145
Amps
5
2574/2575
Amps Present Demand:
Channel 37
Present Current Demand
- Channel 37
AI146
Amps
5
2576/2577
Amps Present Demand:
Channel 38
Present Current Demand
- Channel 38
AI147
Amps
5
2578/2579
Amps Present Demand:
Channel 39
Present Current Demand
- Channel 39
AI148
Amps
5
2580/2581
Amps Present Demand:
Channel 40
Present Current Demand
- Channel 40
AI149
Amps
5
2582/2583
Amps Present Demand:
Channel 41
Present Current Demand
- Channel 41
AI150
Amps
5
2584/2585
Amps Present Demand:
Channel 42
Present Current Demand
- Channel 42
AI151
Amps
5
2586/2587
Amps Max Demand:
Channel 1
Max Current Demand Channel 1
AI152
Amps
5
2588/2589
Amps Max Demand:
Channel 2
Max Current Demand Channel 2
AI153
Amps
5
2590/2591
ZL0135-0A
Page 118 of 162
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps Max Demand:
Channel 3
Max Current Demand Channel 3
AI154
Amps
5
2592/2593
Amps Max Demand:
Channel 4
Max Current Demand Channel 4
AI155
Amps
5
2594/2595
Amps Max Demand:
Channel 5
Max Current Demand Channel 5
AI156
Amps
5
2596/2597
Amps Max Demand:
Channel 6
Max Current Demand Channel 6
AI157
Amps
5
2598/2599
Amps Max Demand:
Channel 7
Max Current Demand Channel 7
AI158
Amps
5
2600/2601
Amps Max Demand:
Channel 8
Max Current Demand Channel 8
AI159
Amps
5
2602/2603
Amps Max Demand:
Channel 9
Max Current Demand Channel 9
AI160
Amps
5
2604/2605
Amps Max Demand:
Channel 10
Max Current Demand Channel 10
AI161
Amps
5
2606/2607
Amps Max Demand:
Channel 11
Max Current Demand Channel 11
AI162
Amps
5
2608/2609
Amps Max Demand:
Channel 12
Max Current Demand Channel 12
AI163
Amps
5
2610/2611
Amps Max Demand:
Channel 13
Max Current Demand Channel 13
AI164
Amps
5
2612/2613
Amps Max Demand:
Channel 14
Max Current Demand Channel 14
AI165
Amps
5
2614/2615
Amps Max Demand:
Channel 15
Max Current Demand Channel 15
AI166
Amps
5
2616/2617
Amps Max Demand:
Channel 16
Max Current Demand Channel 16
AI167
Amps
5
2618/2619
Amps Max Demand:
Channel 17
Max Current Demand Channel 17
AI168
Amps
5
2620/2621
Amps Max Demand:
Channel 18
Max Current Demand Channel 18
AI169
Amps
5
2622/2623
Amps Max Demand:
Channel 19
Max Current Demand Channel 19
AI170
Amps
5
2624/2625
Amps Max Demand:
Channel 20
Max Current Demand Channel 20
AI171
Amps
5
2626/2627
Amps Max Demand:
Channel 21
Max Current Demand Channel 21
AI172
Amps
5
2628/2629
Amps Max Demand:
Channel 22
Max Current Demand Channel 22
AI173
Amps
5
2630/2631
Amps Max Demand:
Channel 23
Max Current Demand Channel 23
AI174
Amps
5
2632/2633
Amps Max Demand:
Channel 24
Max Current Demand Channel 24
AI175
Amps
5
2634/2635
Amps Max Demand:
Channel 25
Max Current Demand Channel 25
AI176
Amps
5
2636/2637
Amps Max Demand:
Channel 26
Max Current Demand Channel 26
AI177
Amps
5
2638/2639
ZL0135-0A
Page 119 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps Max Demand:
Channel 27
Max Current Demand Channel 27
AI178
Amps
5
2640/2641
Amps Max Demand:
Channel 28
Max Current Demand Channel 28
AI179
Amps
5
2642/2643
Amps Max Demand:
Channel 29
Max Current Demand Channel 29
AI180
Amps
5
2644/2645
Amps Max Demand:
Channel 30
Max Current Demand Channel 30
AI181
Amps
5
2646/2647
Amps Max Demand:
Channel 31
Max Current Demand Channel 31
AI182
Amps
5
2648/2649
Amps Max Demand:
Channel 32
Max Current Demand Channel 32
AI183
Amps
5
2650/2651
Amps Max Demand:
Channel 33
Max Current Demand Channel 33
AI184
Amps
5
2652/2653
Amps Max Demand:
Channel 34
Max Current Demand Channel 34
AI185
Amps
5
2654/2655
Amps Max Demand:
Channel 35
Max Current Demand Channel 35
AI186
Amps
5
2656/2657
Amps Max Demand:
Channel 36
Max Current Demand Channel 36
AI187
Amps
5
2658/2659
Amps Max Demand:
Channel 37
Max Current Demand Channel 37
AI188
Amps
5
2660/2661
Amps Max Demand:
Channel 38
Max Current Demand Channel 38
AI189
Amps
5
2662/2663
Amps Max Demand:
Channel 39
Max Current Demand Channel 39
AI190
Amps
5
2664/2665
Amps Max Demand:
Channel 40
Max Current Demand Channel 40
AI191
Amps
5
2666/2667
Amps Max Demand:
Channel 41
Max Current Demand Channel 41
AI192
Amps
5
2668/2669
Amps Max Demand:
Channel 42
Max Current Demand Channel 42
AI193
Amps
5
2670/2671
Max Amps: Channel 1
Max Instantaneous
Current - Channel 1
AI194
Amps
5
2756/2757
Max Amps: Channel 2
Max Instantaneous
Current - Channel 2
AI195
Amps
5
2758/2759
Max Amps: Channel 3
Max Instantaneous
Current - Channel 3
AI196
Amps
5
2760/2761
Max Amps: Channel 4
Max Instantaneous
Current - Channel 4
AI197
Amps
5
2762/2763
Max Amps: Channel 5
Max Instantaneous
Current - Channel 5
AI198
Amps
5
2764/2765
Max Amps: Channel 6
Max Instantaneous
Current - Channel 6
AI199
Amps
5
2766/2767
Max Amps: Channel 7
Max Instantaneous
Current - Channel 7
AI200
Amps
5
2768/2769
Max Amps: Channel 8
Max Instantaneous
Current - Channel 8
AI201
Amps
5
2770/2771
ZL0135-0A
Page 120 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Max Amps: Channel 9
Max Instantaneous
Current - Channel 9
AI202
Amps
5
2772/2773
Max Amps: Channel 10
Max Instantaneous
Current - Channel 10
AI203
Amps
5
2774/2775
Max Amps: Channel 11
Max Instantaneous
Current - Channel 11
AI204
Amps
5
2776/2777
Max Amps: Channel 12
Max Instantaneous
Current - Channel 12
AI205
Amps
5
2778/2779
Max Amps: Channel 13
Max Instantaneous
Current - Channel 13
AI206
Amps
5
2780/2781
Max Amps: Channel 14
Max Instantaneous
Current - Channel 14
AI207
Amps
5
2782/2783
Max Amps: Channel 15
Max Instantaneous
Current - Channel 15
AI208
Amps
5
2784/2785
Max Amps: Channel 16
Max Instantaneous
Current - Channel 16
AI209
Amps
5
2786/2787
Max Amps: Channel 17
Max Instantaneous
Current - Channel 17
AI210
Amps
5
2788/2789
Max Amps: Channel 18
Max Instantaneous
Current - Channel 18
AI211
Amps
5
2790/2791
Max Amps: Channel 19
Max Instantaneous
Current - Channel 19
AI212
Amps
5
2792/2793
Max Amps: Channel 20
Max Instantaneous
Current - Channel 20
AI213
Amps
5
2794/2795
Max Amps: Channel 21
Max Instantaneous
Current - Channel 21
AI214
Amps
5
2796/2797
Max Amps: Channel 22
Max Instantaneous
Current - Channel 22
AI215
Amps
5
2798/2799
Max Amps: Channel 23
Max Instantaneous
Current - Channel 23
AI216
Amps
5
2800/2801
Max Amps: Channel 24
Max Instantaneous
Current - Channel 24
AI217
Amps
5
2802/2803
Max Amps: Channel 25
Max Instantaneous
Current - Channel 25
AI218
Amps
5
2804/2805
Max Amps: Channel 26
Max Instantaneous
Current - Channel 26
AI219
Amps
5
2806/2807
Max Amps: Channel 27
Max Instantaneous
Current - Channel 27
AI220
Amps
5
2808/2809
Max Amps: Channel 28
Max Instantaneous
Current - Channel 28
AI221
Amps
5
2810/2811
Max Amps: Channel 29
Max Instantaneous
Current - Channel 29
AI222
Amps
5
2812/2813
Max Amps: Channel 30
Max Instantaneous
Current - Channel 30
AI223
Amps
5
2814/2815
Max Amps: Channel 31
Max Instantaneous
Current - Channel 31
AI224
Amps
5
2816/2817
Max Amps: Channel 32
Max Instantaneous
Current - Channel 32
AI225
Amps
5
2818/2819
ZL0135-0A
Page 121 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Max Amps: Channel 33
Max Instantaneous
Current - Channel 33
AI226
Amps
5
2820/2821
Max Amps: Channel 34
Max Instantaneous
Current - Channel 34
AI227
Amps
5
2822/2823
Max Amps: Channel 35
Max Instantaneous
Current - Channel 35
AI228
Amps
5
2824/2825
Max Amps: Channel 36
Max Instantaneous
Current - Channel 36
AI229
Amps
5
2826/2827
Max Amps: Channel 37
Max Instantaneous
Current - Channel 37
AI230
Amps
5
2828/2829
Max Amps: Channel 38
Max Instantaneous
Current - Channel 38
AI231
Amps
5
2830/2831
Max Amps: Channel 39
Max Instantaneous
Current - Channel 39
AI232
Amps
5
2832/2833
Max Amps: Channel 40
Max Instantaneous
Current - Channel 40
AI233
Amps
5
2834/2835
Max Amps: Channel 41
Max Instantaneous
Current - Channel 41
AI234
Amps
5
2836/2837
Max Amps: Channel 42
Max Instantaneous
Current - Channel 42
AI235
Amps
5
2838/2839
Configuration (bit 0 is
LSB):
Configuration (bit 0 is
LSB):
AV1
n/a
1
6
Bit 0: 0 = odd-even, 1 = sequential
Bit 1: 0 = odd-even, 1 = sequential
Bits 2-15: future use
Examples:
Value 0 = Odd/Even
Value 1 = Reserved for Solid-Core
Value 2 = Sequential
Value 3 = Reserved for Solid-Core
# of Sub-Intervals per
Demand Int.
Number of Sub-Interval
per Dem Interval
AV2
n/a
1
71
Sets the number of sub-intervals that make a single demand interval.
For block demand, set this to 1.
Sub-Interval Length in
seconds.
Sub-Interval Length in
seconds.
AV3
n/a
1
72
Sub-Interval Length in seconds. For sync-to-comms, set this to 0.
Branch 1 CT Size
Branch 1 CT Size
AV4
Amps
5
73
These are writable ONLY on E31Bxxx/E31Cxxx split-core models.
These are NOT WRITABLE on E30Bxxx/E30Cxxx solid-core models
because the CT size is fixed (at 100 A). Other values written revert to
100 A the next time the meter is scanned.
Branch 2 CT Size
Branch 2 CT Size
AV5
Amps
5
74
Branch 3 CT Size
Branch 3 CT Size
AV6
Amps
5
75
Branch 4 CT Size
Branch 4 CT Size
AV7
Amps
5
76
Branch 5 CT Size
Branch 5 CT Size
AV8
Amps
5
77
Branch 6 CT Size
Branch 6 CT Size
AV9
Amps
5
78
Branch 7 CT Size
Branch 7 CT Size
AV10
Amps
5
79
Branch 8 CT Size
Branch 8 CT Size
AV11
Amps
5
80
Branch 9 CT Size
Branch 9 CT Size
AV12
Amps
5
81
Branch 10 CT Size
Branch 10 CT Size
AV13
Amps
5
82
Branch 11 CT Size
Branch 11 CT Size
AV14
Amps
5
83
Analog_Value objects
ZL0135-0A
Page 122 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 12 CT Size
Branch 12 CT Size
AV15
Amps
5
84
Branch 13 CT Size
Branch 13 CT Size
AV16
Amps
5
85
Branch 14 CT Size
Branch 14 CT Size
AV17
Amps
5
86
Branch 15 CT Size
Branch 15 CT Size
AV18
Amps
5
87
Branch 16 CT Size
Branch 16 CT Size
AV19
Amps
5
88
Branch 17 CT Size
Branch 17 CT Size
AV20
Amps
5
89
Branch 18 CT Size
Branch 18 CT Size
AV21
Amps
5
90
Branch 19 CT Size
Branch 19 CT Size
AV22
Amps
5
91
Branch 20 CT Size
Branch 20 CT Size
AV23
Amps
5
92
Branch 21 CT Size
Branch 21 CT Size
AV24
Amps
5
93
Branch 22 CT Size
Branch 22 CT Size
AV25
Amps
5
94
Branch 23 CT Size
Branch 23 CT Size
AV26
Amps
5
95
Branch 24 CT Size
Branch 24 CT Size
AV27
Amps
5
96
Branch 25 CT Size
Branch 25 CT Size
AV28
Amps
5
97
Branch 26 CT Size
Branch 26 CT Size
AV29
Amps
5
98
Branch 27 CT Size
Branch 27 CT Size
AV30
Amps
5
99
Branch 28 CT Size
Branch 28 CT Size
AV31
Amps
5
100
Branch 29 CT Size
Branch 29 CT Size
AV32
Amps
5
101
Branch 30 CT Size
Branch 30 CT Size
AV33
Amps
5
102
Branch 31 CT Size
Branch 31 CT Size
AV34
Amps
5
103
Branch 32 CT Size
Branch 32 CT Size
AV35
Amps
5
104
Branch 33 CT Size
Branch 33 CT Size
AV36
Amps
5
105
Branch 34 CT Size
Branch 34 CT Size
AV37
Amps
5
106
Branch 35 CT Size
Branch 35 CT Size
AV38
Amps
5
107
Branch 36 CT Size
Branch 36 CT Size
AV39
Amps
5
108
Branch 37 CT Size
Branch 37 CT Size
AV40
Amps
5
109
Branch 38 CT Size
Branch 38 CT Size
AV41
Amps
5
110
Branch 39 CT Size
Branch 39 CT Size
AV42
Amps
5
111
Branch 40 CT Size
Branch 40 CT Size
AV43
Amps
5
112
Branch 41 CT Size
Branch 41 CT Size
AV44
Amps
5
113
Branch 42 CT Size
Branch 42 CT Size
AV45
Amps
5
114
AUX Channel (phase 1)
CT Size
AUX Channel (phase 1)
CT Size
AV46
Amps
5
115
AUX Channel (phase 2)
CT Size
AUX Channel (phase 2)
CT Size
AV47
Amps
5
116
AUX Channel (phase 3)
CT Size
AUX Channel (phase 3)
CT Size
AV48
Amps
5
117
AUX Channel (Neutral)
CT Size
AUX Channel (Neutral)
CT Size
AV49
Amps
5
118
Branch 1 Breaker Size
Branch 1 Breaker Size
AV50
Amps
5
119
Branch 2 Breaker Size
Branch 2 Breaker Size
AV51
Amps
5
120
ZL0135-0A
Page 123 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 3 Breaker Size
Branch 3 Breaker Size
AV52
Amps
5
121
Branch 4 Breaker Size
Branch 4 Breaker Size
AV53
Amps
5
122
Branch 5 Breaker Size
Branch 5 Breaker Size
AV54
Amps
5
123
Branch 6 Breaker Size
Branch 6 Breaker Size
AV55
Amps
5
124
Branch 7 Breaker Size
Branch 7 Breaker Size
AV56
Amps
5
125
Branch 8 Breaker Size
Branch 8 Breaker Size
AV57
Amps
5
126
Branch 9 Breaker Size
Branch 9 Breaker Size
AV58
Amps
5
127
Branch 10 Breaker Size
Branch 10 Breaker Size
AV59
Amps
5
128
Branch 11 Breaker Size
Branch 11 Breaker Size
AV60
Amps
5
129
Branch 12 Breaker Size
Branch 12 Breaker Size
AV61
Amps
5
130
Branch 13 Breaker Size
Branch 13 Breaker Size
AV62
Amps
5
131
Branch 14 Breaker Size
Branch 14 Breaker Size
AV63
Amps
5
132
Branch 15 Breaker Size
Branch 15 Breaker Size
AV64
Amps
5
133
Branch 16 Breaker Size
Branch 16 Breaker Size
AV65
Amps
5
134
Branch 17 Breaker Size
Branch 17 Breaker Size
AV66
Amps
5
135
Branch 18 Breaker Size
Branch 18 Breaker Size
AV67
Amps
5
136
Branch 19 Breaker Size
Branch 19 Breaker Size
AV68
Amps
5
137
Branch 20 Breaker Size
Branch 20 Breaker Size
AV69
Amps
5
138
Branch 21 Breaker Size
Branch 21 Breaker Size
AV70
Amps
5
139
Branch 22 Breaker Size
Branch 22 Breaker Size
AV71
Amps
5
140
Branch 23 Breaker Size
Branch 23 Breaker Size
AV72
Amps
5
141
Branch 24 Breaker Size
Branch 24 Breaker Size
AV73
Amps
5
142
Branch 25 Breaker Size
Branch 25 Breaker Size
AV74
Amps
5
143
Branch 26 Breaker Size
Branch 26 Breaker Size
AV75
Amps
5
144
Branch 27 Breaker Size
Branch 27 Breaker Size
AV76
Amps
5
145
Branch 28 Breaker Size
Branch 28 Breaker Size
AV77
Amps
5
146
Branch 29 Breaker Size
Branch 29 Breaker Size
AV78
Amps
5
147
Branch 30 Breaker Size
Branch 30 Breaker Size
AV79
Amps
5
148
Branch 31 Breaker Size
Branch 31 Breaker Size
AV80
Amps
5
149
Branch 32 Breaker Size
Branch 32 Breaker Size
AV81
Amps
5
150
Branch 33 Breaker Size
Branch 33 Breaker Size
AV82
Amps
5
151
Branch 34 Breaker Size
Branch 34 Breaker Size
AV83
Amps
5
152
Branch 35 Breaker Size
Branch 35 Breaker Size
AV84
Amps
5
153
Branch 36 Breaker Size
Branch 36 Breaker Size
AV85
Amps
5
154
Branch 37 Breaker Size
Branch 37 Breaker Size
AV86
Amps
5
155
Branch 38 Breaker Size
Branch 38 Breaker Size
AV87
Amps
5
156
Branch 39 Breaker Size
Branch 39 Breaker Size
AV88
Amps
5
157
Branch 40 Breaker Size
Branch 40 Breaker Size
AV89
Amps
5
158
Branch 41 Breaker Size
Branch 41 Breaker Size
AV90
Amps
5
159
Branch 42 Breaker Size
Branch 42 Breaker Size
AV91
Amps
5
160
ZL0135-0A
Page 124 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
AUX Channel (phase 1)
Breaker Size
AUX Channel (phase 1)
Breaker Size
AV92
Amps
5
161
AUX Channel (phase 2)
Breaker Size
AUX Channel (phase 2)
Breaker Size
AV93
Amps
5
162
AUX Channel (phase 3)
Breaker Size
AUX Channel (phase 3)
Breaker Size
AV94
Amps
5
163
AUX Channel (Neutral)
Breaker Size
AUX Channel (Neutral)
Breaker Size
AV95
Amps
5
164
High-High Latching
Alarm Time Delay
Alarm event duration
threshold
AV96
Seconds
1
165
High Latching Alarm
Time Delay
Alarm event duration
threshold
AV97
Seconds
1
166
Low Latching Alarm
Time Delay
Alarm event duration
threshold
AV98
Seconds
1
167
Low-Low Latching Alarm Alarm event duration
Time Delay
threshold
AV99
Seconds
1
168
Latching Alarm ON Time
From initial current to
alarms enabled
AV100
Seconds
1
169
Latching Alarm ON Time (when current is above Low-Low alarm and
ON Time elapses then ON state is declared for all latching alarms, ON
State enables Alarm Time Delays)
Latching Alarms time
until OFF state
time until OFF state
declared
AV101
Seconds
1
170
Latching Alarms time until OFF state is declared for all latching alarms
(when current is below Low-Low alarm and ON state was declared)
High-High Latching
Alarm Threshold
% of breaker size
AV102
Percent
1
171
High Alarm Latching
Alarm Threshold
% of breaker size
AV103
Percent
1
172
Low Alarm Latching
Alarm Threshold
% of breaker size
AV104
Percent
1
173
Low Low Latching Alarm
Threshold
% of breaker size
AV105
Percent
1
174
Non-Latching High
Threshold
% of breaker size
AV106
Percent
1
175
Non-Latching Low
Threshold
% of breaker size
AV107
Percent
1
176
Non-Latching Hysteresis
(0-100%)
Non-Latching Hysteresis
(% of setpoint)
AV108
Percent
1
177
Branch 1 Alarm Status
Write 0 to alarm bits to
clear alarms
AV109
n/a
1
178
Branch 2 Alarm Status
Write 0 to alarm bits to
clear alarms
AV110
n/a
1
179
ZL0135-0A
Page 125 of 162
These timers control entry into a latching alarm state. A return to a
non-alarm state is instantaneous. All channels use the same global
timers. Latching Alarm On Time applies to all Latching Alarms. The
parameter measurement rate is expected to be approximately 2.5
sec, which limits the effective resolution of these timers.
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to a
Non-Latching alarm is ignored.
Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state declared (1=OFF; ON state must have
been achieved prior)
Bit 5-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 3 Alarm Status
Write 0 to alarm bits to
clear alarms
AV111
n/a
1
180
Branch 4 Alarm Status
Write 0 to alarm bits to
clear alarms
AV112
n/a
1
181
Branch 5 Alarm Status
Write 0 to alarm bits to
clear alarms
AV113
n/a
1
182
Branch 6 Alarm Status
Write 0 to alarm bits to
clear alarms
AV114
n/a
1
183
Branch 7 Alarm Status
Write 0 to alarm bits to
clear alarms
AV115
n/a
1
184
Branch 8 Alarm Status
Write 0 to alarm bits to
clear alarms
AV116
n/a
1
185
Branch 9 Alarm Status
Write 0 to alarm bits to
clear alarms
AV117
n/a
1
186
Branch 10 Alarm Status
Write 0 to alarm bits to
clear alarms
AV118
n/a
1
187
Branch 11 Alarm Status
Write 0 to alarm bits to
clear alarms
AV119
n/a
1
188
Branch 12 Alarm Status
Write 0 to alarm bits to
clear alarms
AV120
n/a
1
189
Branch 13 Alarm Status
Write 0 to alarm bits to
clear alarms
AV121
n/a
1
190
Branch 14 Alarm Status
Write 0 to alarm bits to
clear alarms
AV122
n/a
1
191
Branch 15 Alarm Status
Write 0 to alarm bits to
clear alarms
AV123
n/a
1
192
Branch 16 Alarm Status
Write 0 to alarm bits to
clear alarms
AV124
n/a
1
193
Branch 17 Alarm Status
Write 0 to alarm bits to
clear alarms
AV125
n/a
1
194
Branch 18 Alarm Status
Write 0 to alarm bits to
clear alarms
AV126
n/a
1
195
Branch 19 Alarm Status
Write 0 to alarm bits to
clear alarms
AV127
n/a
1
196
Branch 20 Alarm Status
Write 0 to alarm bits to
clear alarms
AV128
n/a
1
197
Branch 21 Alarm Status
Write 0 to alarm bits to
clear alarms
AV129
n/a
1
198
Branch 22 Alarm Status
Write 0 to alarm bits to
clear alarms
AV130
n/a
1
199
Branch 23 Alarm Status
Write 0 to alarm bits to
clear alarms
AV131
n/a
1
200
Branch 24 Alarm Status
Write 0 to alarm bits to
clear alarms
AV132
n/a
1
201
Branch 25 Alarm Status
Write 0 to alarm bits to
clear alarms
AV133
n/a
1
202
Branch 26 Alarm Status
Write 0 to alarm bits to
clear alarms
AV134
n/a
1
203
ZL0135-0A
Page 126 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Branch 27 Alarm Status
Write 0 to alarm bits to
clear alarms
AV135
n/a
1
204
Branch 28 Alarm Status
Write 0 to alarm bits to
clear alarms
AV136
n/a
1
205
Branch 29 Alarm Status
Write 0 to alarm bits to
clear alarms
AV137
n/a
1
206
Branch 30 Alarm Status
Write 0 to alarm bits to
clear alarms
AV138
n/a
1
207
Branch 31 Alarm Status
Write 0 to alarm bits to
clear alarms
AV139
n/a
1
208
Branch 32 Alarm Status
Write 0 to alarm bits to
clear alarms
AV140
n/a
1
209
Branch 33 Alarm Status
Write 0 to alarm bits to
clear alarms
AV141
n/a
1
210
Branch 34 Alarm Status
Write 0 to alarm bits to
clear alarms
AV142
n/a
1
211
Branch 35 Alarm Status
Write 0 to alarm bits to
clear alarms
AV143
n/a
1
212
Branch 36 Alarm Status
Write 0 to alarm bits to
clear alarms
AV144
n/a
1
213
Branch 37 Alarm Status
Write 0 to alarm bits to
clear alarms
AV145
n/a
1
214
Branch 38 Alarm Status
Write 0 to alarm bits to
clear alarms
AV146
n/a
1
215
Branch 39 Alarm Status
Write 0 to alarm bits to
clear alarms
AV147
n/a
1
216
Branch 40 Alarm Status
Write 0 to alarm bits to
clear alarms
AV148
n/a
1
217
Branch 41 Alarm Status
Write 0 to alarm bits to
clear alarms
AV149
n/a
1
218
Branch 42 Alarm Status
Write 0 to alarm bits to
clear alarms
AV150
n/a
1
219
AUX Channel (phase 1)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV151
n/a
1
220
AUX Channel (phase 2)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV152
n/a
1
221
AUX Channel (phase 3)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV153
n/a
1
222
AUX Channel (Neutral)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV154
n/a
1
223
Overvoltage Alarm Timer Alarm event duration
threshold
AV155
Seconds
1
236
Controls entry into Overvoltage alarm state. A return to a non-alarm
state is instantaneous. All channels use these same global timers.
Note that the parameter measurement update rate is 1.6 sec, which
limits the effective resolution of these timers.
Undervoltage Alarm
Timer
Alarm event duration
threshold
AV156
Seconds
1
237
Controls entry into Undervoltage alarm state. A return to a non-alarm
state is instantaneous. All channels use these same global timers.
Note that the parameter measurement update rate is 1.6 sec, which
limits the effective resolution of these timers.
Overvoltage Alarm
Threshold
Overvoltage level
threshold (0=OFF)
AV157
Volts
5
238
ZL0135-0A
Page 127 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
Undervoltage Alarm
Threshold
Undervoltage level
threshold (0=OFF)
BACnet
Object
AV158
Units
COV_
Increment
Modbus
Address
Comments
Volts
5
239
Voltage Alarm Hysteresis Voltage Alarm Hysteresis AV159
(% of setpoint)
Percent
1
240
Percentage of setpoint.
Voltage 1 Alarm Status
Write 0 to alarm bits to
clear alarms
AV160
n/a
1
241
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Voltage 2 Alarm Status
Write 0 to alarm bits to
clear alarms
AV161
n/a
1
242
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Voltage 3 Alarm Status
Write 0 to alarm bits to
clear alarms
AV162
n/a
1
243
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Power Up Counter
Power Up Counter
AV163
n/a
1
531
Number of power-up cycles (write 0 to reset)
User Defined Status
Register
1 in bit 0 enables CT
phase assignment
AV164
n/a
1
62017
User Defined Status Register:
Bit 0: Enable User CT Phase Assignment
Bit 1-15: Reserved
Voltage Phase for Aux
Channel 1
0=phase-1/A, 1=phase- AV165
2/B, 2=phase-3/C
n/a
1
62158
Voltage Phase for Aux
Channel 2
0=phase-1/A, 1=phase- AV166
2/B, 2=phase-3/C
n/a
1
62159
Voltage Phase for Aux
Channel 3
0=phase-1/A, 1=phase- AV167
2/B, 2=phase-3/C
n/a
1
62160
Analog_Output objects
AUX Resets: Write value
to reset
10203=kWh,
29877=Max Current &
Max kW
AO1
n/a
1
294
Write the listed value to perform the corresponding reset:
10203 = Clear kWh value to zero
29877 = Clear Max Current and Max kW values to zero
Global Resets: Write
value to reset
10203=kWh, others…
AO2
n/a
1
295
Write the listed value to perform the corresponding reset:
26012 = Begin new Demand Sub-interval
26013 = Reset Demand
31010 = Reset all Latching Alarms
10203 = Clear all kWh values to zero
29877 = Clear all Max Current and Max kW values to zero
20097 = Clear all Max Demand values to zero
ZL0135-0A
Page 128 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Channel 1 Reset
10203=kWh,
29877=Max Current &
Max kW
AO3
n/a
1
1126
Channel 2 Reset
10203=kWh,
29877=Max Current &
Max kW
AO4
n/a
1
1127
Channel 3 Reset
10203=kWh,
29877=Max Current &
Max kW
AO5
n/a
1
1128
Channel 4 Reset
10203=kWh,
29877=Max Current &
Max kW
AO6
n/a
1
1129
Channel 5 Reset
10203=kWh,
29877=Max Current &
Max kW
AO7
n/a
1
1130
Channel 6 Reset
10203=kWh,
29877=Max Current &
Max kW
AO8
n/a
1
1131
Channel 7 Reset
10203=kWh,
29877=Max Current &
Max kW
AO9
n/a
1
1132
Channel 8 Reset
10203=kWh,
29877=Max Current &
Max kW
AO10
n/a
1
1133
Channel 9 Reset
10203=kWh,
29877=Max Current &
Max kW
AO11
n/a
1
1134
Channel 10 Reset
10203=kWh,
29877=Max Current &
Max kW
AO12
n/a
1
1135
Channel 11 Reset
10203=kWh,
29877=Max Current &
Max kW
AO13
n/a
1
1136
Channel 12 Reset
10203=kWh,
29877=Max Current &
Max kW
AO14
n/a
1
1137
Channel 13 Reset
10203=kWh,
29877=Max Current &
Max kW
AO15
n/a
1
1138
Channel 14 Reset
10203=kWh,
29877=Max Current &
Max kW
AO16
n/a
1
1139
Channel 15 Reset
10203=kWh,
29877=Max Current &
Max kW
AO17
n/a
1
1140
Channel 16 Reset
10203=kWh,
29877=Max Current &
Max kW
AO18
n/a
1
1141
Channel 17 Reset
10203=kWh,
29877=Max Current &
Max kW
AO19
n/a
1
1142
ZL0135-0A
Page 129 of 162
Comments
Write the listed value to perform the corresponding reset:
10203 = Clear kWh value to zero
29877 = Clear Max Current and Max kW values to zero
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Channel 18 Reset
10203=kWh,
29877=Max Current &
Max kW
AO20
n/a
1
1143
Channel 19 Reset
10203=kWh,
29877=Max Current &
Max kW
AO21
n/a
1
1144
Channel 20 Reset
10203=kWh,
29877=Max Current &
Max kW
AO22
n/a
1
1145
Channel 21 Reset
10203=kWh,
29877=Max Current &
Max kW
AO23
n/a
1
1146
Channel 22 Reset
10203=kWh,
29877=Max Current &
Max kW
AO24
n/a
1
1147
Channel 23 Reset
10203=kWh,
29877=Max Current &
Max kW
AO25
n/a
1
1148
Channel 24 Reset
10203=kWh,
29877=Max Current &
Max kW
AO26
n/a
1
1149
Channel 25 Reset
10203=kWh,
29877=Max Current &
Max kW
AO27
n/a
1
1150
Channel 26 Reset
10203=kWh,
29877=Max Current &
Max kW
AO28
n/a
1
1151
Channel 27 Reset
10203=kWh,
29877=Max Current &
Max kW
AO29
n/a
1
1152
Channel 28 Reset
10203=kWh,
29877=Max Current &
Max kW
AO30
n/a
1
1153
Channel 29 Reset
10203=kWh,
29877=Max Current &
Max kW
AO31
n/a
1
1154
Channel 30 Reset
10203=kWh,
29877=Max Current &
Max kW
AO32
n/a
1
1155
Channel 31 Reset
10203=kWh,
29877=Max Current &
Max kW
AO33
n/a
1
1156
Channel 32 Reset
10203=kWh,
29877=Max Current &
Max kW
AO34
n/a
1
1157
Channel 33 Reset
10203=kWh,
29877=Max Current &
Max kW
AO35
n/a
1
1158
Channel 34 Reset
10203=kWh,
29877=Max Current &
Max kW
AO36
n/a
1
1159
ZL0135-0A
Page 130 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xBxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Channel 35 Reset
10203=kWh,
29877=Max Current &
Max kW
AO37
n/a
1
1160
Channel 36 Reset
10203=kWh,
29877=Max Current &
Max kW
AO38
n/a
1
1161
Channel 37 Reset
10203=kWh,
29877=Max Current &
Max kW
AO39
n/a
1
1162
Channel 38 Reset
10203=kWh,
29877=Max Current &
Max kW
AO40
n/a
1
1163
Channel 39 Reset
10203=kWh,
29877=Max Current &
Max kW
AO41
n/a
1
1164
Channel 40 Reset
10203=kWh,
29877=Max Current &
Max kW
AO42
n/a
1
1165
Channel 41 Reset
10203=kWh,
29877=Max Current &
Max kW
AO43
n/a
1
1166
Channel 42 Reset
10203=kWh,
29877=Max Current &
Max kW
AO44
n/a
1
1167
ZL0135-0A
Page 131 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters
The E3xCxxx meters have 446 data objects per Modbus address and operate at 9600, 19200 or 38400 baud. These meters monitor current on 42 branch circuits and 4 main
circuits (up to 3 phases, plus neutral) for each Modbus address. The E30Cx42 models have one Modbus address and support only 42 branch channels (plus main channels). The
E30Cx84 models and all E31Cxxx models have two Modbus addresses and support up to 84 branch channels and two sets of main channels.
AV4-AV45 are not writable on E30Cxxx solid-core models because the CT size is fixed (at 100 A). Other values written revert to 100 A the next time the meter is scanned. AV4AV45 are writable on E31Cxxx split-core models.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_Input objects
Amps: 3ph Average
(phases 1,2,3)
Inst Current- average of
active phases
AI1
Amps
5
624/625
Amps: Phase 1
Instantaneous Current Phase 1
AI2
Amps
5
638/639
Amps: Phase 2
Instantaneous Current Phase 2
AI3
Amps
5
640/641
Amps: Phase 3
Instantaneous Current Phase 3
AI4
Amps
5
642/643
Amps: Phase 4 (Neutral)
Instantaneous Neutral
Current
AI5
Amps
5
644/645
Amps Present Demand:
Phase 1
Present Current
Demand- Phase 1
AI6
Amps
5
646/647
Amps Present Demand:
Phase 2
Present Current Demand
- Phase 2
AI7
Amps
5
648/649
Amps Present Demand:
Phase 3
Present Current Demand
- Phase 3
AI8
Amps
5
650/651
Amps Present Demand:
Phase 4 (Neutral)
Present Current Demand
- Neutral
AI9
Amps
5
652/653
Amps Max Demand:
Phase 1
Max Current Demand Phase 1
AI10
Amps
5
654/655
Amps Max Demand:
Phase 2
Max Current Demand Phase 2
AI11
Amps
5
656/657
Amps Max Demand:
Phase 3
Max Current Demand Phase 3
AI12
Amps
5
658/659
Amps Max Demand:
Phase 4 (Neutral)
Max Current Demand Neutral
AI13
Amps
5
660/661
Max Amps: Phase 1
Max Instantaneous
Current - Phase 1
AI14
Amps
5
666/667
Max Amps: Phase 2
Max Instantaneous
Current - Phase 2
AI15
Amps
5
668/669
Max Amps: Phase 3
Max Instantaneous
Current - Phase 3
AI16
Amps
5
670/671
Max Amps: Phase 4
(Neutal)
Max Instantaneous
Neutral Current
AI17
Amps
5
672/673
ZL0135-0A
Page 132 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Device Health
Bit Map of Device Health
Indicators
AI18
n/a
1
532
Bit 0: Reserved
Bit 1: Frequency Out of Range or insufficient voltage on Phase A to
determine frequency range. Frequency range is 40-70 Hz.
Bit 2: Phase A Voltage Clipping
Bit 3: Phase B Voltage Clipping
Bit 4: Phase C Voltage Clipping
Bit 5: Current Clipping on at least 1 channel (AUX & Circuit)
Bit 6-7: Reserved
Bit 8: Strip Connection Error
Bit 9-12: Reserved
Bit 13: Current Model, Model C
Bit 14: Power Model, Model B
Bit 15: Branch Power, Model A
Reserved for future use
Reserved for future use
AI19
n/a
1
533
Reserved for future use
Reserved for future use
AI20
n/a
1
534
Reserved for future use
Reserved for future use
AI21
n/a
1
535
Reserved for future use
Reserved for future use
AI22
n/a
1
536
Reserved for future use
Reserved for future use
AI23
n/a
1
537
Reserved for future use
Reserved for future use
AI24
n/a
1
538
Product ID
bit Map of Model
configuration
AI25
n/a
1
539
Bit 0: Default Solid-Core
Bit 1: Default Split-Core
Bit 3-9: Reserved
Bit 10: Reserved
Bit 11: Reserved
Bit 12: Custom V-Phase Capable
Bit 13: Reserved (Model C)
Bit 14: Reserved (Model B)
Bit 15: Reserved (Model A)
Serial Number MSW
Serial Number MSW
AI26
n/a
1
1
Upper 16-bits of a 32-bit Hex Value
Lower 16-bits of a 32-bit Hex Value
Serial Number LSW
Serial Number LSW
AI27
n/a
1
2
Firmware Revision RS
Firmware Revision RS
AI28
n/a
1
3
Firmware Revision OS
Firmware Revision OS
AI29
n/a
1
4
Device ID:
15170=C, 15171=B,
15172=A
AI30
n/a
1
5
15170 = Model C, current only on all channels, no voltage
15171 = Model B, current only on branch channels, power on AUX
channels plus voltage
15172 = Model A, current and power on all channels plus voltage
Global Latching Alarm
Status
(HHL,HL,LL,LLL,ON,Rsv,R
sv,Rsv,HVL,LVL)
AI31
n/a
1
224
Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state declared (1=OFF; ON state must have
been achieved prior)
Bit 5-7: Reserved for future use (reads 0)
Bit 8: High Voltage Latching Alarm
Bit 9: Low Voltage Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
ZL0135-0A
Page 133 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Global Non-Latching
Alarm Status
(HL,LL,Rsv,Rsv,Rsv,Rsv,Rs AI32
v,Rsv,HVL,LVL)
n/a
1
225
Bit 0: High Non-Latching Alarm
Bit 1: Low Non-Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Voltage Non-Latching Alarm
Bit 9: Low Voltage Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Global Most-Recent
Latching Alarm Chan
# of Most-Recent
Channel (0=none)
AI33
n/a
1
226
0-46, 0=none
Global Most-Recent Non- # of Most-Recent
Latching Alrm Ch
Channel (0=none)
AI34
n/a
1
227
0-46, 0=none
Total number of Latch
channels in alarm
# alarm chan (nonlatching alarms)
AI35
n/a
1
228
Total number of nonLatch chan in alarm
# alarm chan (based on
latching alarms)
AI36
n/a
1
229
Error Bitmap1
(placeholder - bits TBD)
Error Bitmap1
(placeholder - bits TBD)
AI37
n/a
1
230
Error Bitmap2
(placeholder - bits TBD)
Error Bitmap2
(placeholder - bits TBD)
AI38
n/a
1
231
Error Bitmap3
(placeholder - bits TBD)
Error Bitmap3
(placeholder - bits TBD)
AI39
n/a
1
232
Error Bitmap4
(placeholder - bits TBD)
Error Bitmap4
(placeholder - bits TBD)
AI40
n/a
1
233
Error Bitmap5
(placeholder - bits TBD)
Error Bitmap5
(placeholder - bits TBD)
AI41
n/a
1
234
Error Bitmap6
(placeholder - bits TBD)
Error Bitmap6
(placeholder - bits TBD)
AI42
n/a
1
235
Amps: Channel 1
Instantaneous Current Channel 1
AI43
Amps
5
2252/2253
Amps: Channel 2
Instantaneous Current Channel 2
AI44
Amps
5
2254/2255
Amps: Channel 3
Instantaneous Current Channel 3
AI45
Amps
5
2256/2257
Amps: Channel 4
Instantaneous Current Channel 4
AI46
Amps
5
2258/2259
Amps: Channel 5
Instantaneous Current Channel 5
AI47
Amps
5
2260/2261
Amps: Channel 6
Instantaneous Current Channel 6
AI48
Amps
5
2262/2263
Amps: Channel 7
Instantaneous Current Channel 7
AI49
Amps
5
2264/2265
Amps: Channel 8
Instantaneous Current Channel 8
AI50
Amps
5
2266/2267
Amps: Channel 9
Instantaneous Current Channel 9
AI51
Amps
5
2268/2269
Amps: Channel 10
Instantaneous Current Channel 10
AI52
Amps
5
2270/2271
Amps: Channel 11
Instantaneous Current Channel 11
AI53
Amps
5
2272/2273
ZL0135-0A
Page 134 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Channel 12
Instantaneous Current Channel 12
AI54
Amps
5
2274/2275
Amps: Channel 13
Instantaneous Current Channel 13
AI55
Amps
5
2276/2277
Amps: Channel 14
Instantaneous Current Channel 14
AI56
Amps
5
2278/2279
Amps: Channel 15
Instantaneous Current Channel 15
AI57
Amps
5
2280/2281
Amps: Channel 16
Instantaneous Current Channel 16
AI58
Amps
5
2282/2283
Amps: Channel 17
Instantaneous Current Channel 17
AI59
Amps
5
2284/2285
Amps: Channel 18
Instantaneous Current Channel 18
AI60
Amps
5
2286/2287
Amps: Channel 19
Instantaneous Current Channel 19
AI61
Amps
5
2288/2289
Amps: Channel 20
Instantaneous Current Channel 20
AI62
Amps
5
2290/2291
Amps: Channel 21
Instantaneous Current Channel 21
AI63
Amps
5
2292/2293
Amps: Channel 22
Instantaneous Current Channel 22
AI64
Amps
5
2294/2295
Amps: Channel 23
Instantaneous Current Channel 23
AI65
Amps
5
2296/2297
Amps: Channel 24
Instantaneous Current Channel 24
AI66
Amps
5
2298/2299
Amps: Channel 25
Instantaneous Current Channel 25
AI67
Amps
5
2300/2301
Amps: Channel 26
Instantaneous Current Channel 26
AI68
Amps
5
2302/2303
Amps: Channel 27
Instantaneous Current Channel 27
AI69
Amps
5
2304/2305
Amps: Channel 28
Instantaneous Current Channel 28
AI70
Amps
5
2306/2307
Amps: Channel 29
Instantaneous Current Channel 29
AI71
Amps
5
2308/2309
Amps: Channel 30
Instantaneous Current Channel 30
AI72
Amps
5
2310/2311
Amps: Channel 31
Instantaneous Current Channel 31
AI73
Amps
5
2312/2313
Amps: Channel 32
Instantaneous Current Channel 32
AI74
Amps
5
2314/2315
Amps: Channel 33
Instantaneous Current Channel 33
AI75
Amps
5
2316/2317
Amps: Channel 34
Instantaneous Current Channel 34
AI76
Amps
5
2318/2319
Amps: Channel 35
Instantaneous Current Channel 35
AI77
Amps
5
2320/2321
ZL0135-0A
Page 135 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps: Channel 36
Instantaneous Current Channel 36
AI78
Amps
5
2322/2323
Amps: Channel 37
Instantaneous Current Channel 37
AI79
Amps
5
2324/2325
Amps: Channel 38
Instantaneous Current Channel 38
AI80
Amps
5
2326/2327
Amps: Channel 39
Instantaneous Current Channel 39
AI81
Amps
5
2328/2329
Amps: Channel 40
Instantaneous Current Channel 40
AI82
Amps
5
2330/2331
Amps: Channel 41
Instantaneous Current Channel 41
AI83
Amps
5
2332/2333
Amps: Channel 42
Instantaneous Current Channel 42
AI84
Amps
5
2334/2335
Amps Present Demand:
Channel 1
Present Current Demand
- Channel 1
AI85
Amps
5
2504/2505
Amps Present Demand:
Channel 2
Present Current Demand
- Channel 2
AI86
Amps
5
2506/2507
Amps Present Demand:
Channel 3
Present Current Demand
- Channel 3
AI87
Amps
5
2508/2509
Amps Present Demand:
Channel 4
Present Current Demand
- Channel 4
AI88
Amps
5
2510/2511
Amps Present Demand:
Channel 5
Present Current Demand
- Channel 5
AI89
Amps
5
2512/2513
Amps Present Demand:
Channel 6
Present Current Demand
- Channel 6
AI90
Amps
5
2514/2515
Amps Present Demand:
Channel 7
Present Current Demand
- Channel 7
AI91
Amps
5
2516/2517
Amps Present Demand:
Channel 8
Present Current Demand
- Channel 8
AI92
Amps
5
2518/2519
Amps Present Demand:
Channel 9
Present Current Demand
- Channel 9
AI93
Amps
5
2520/2521
Amps Present Demand:
Channel 10
Present Current Demand
- Channel 10
AI94
Amps
5
2522/2523
Amps Present Demand:
Channel 11
Present Current Demand
- Channel 11
AI95
Amps
5
2524/2525
Amps Present Demand:
Channel 12
Present Current Demand
- Channel 12
AI96
Amps
5
2526/2527
Amps Present Demand:
Channel 13
Present Current Demand
- Channel 13
AI97
Amps
5
2528/2529
Amps Present Demand:
Channel 14
Present Current Demand
- Channel 14
AI98
Amps
5
2530/2531
Amps Present Demand:
Channel 15
Present Current Demand
- Channel 15
AI99
Amps
5
2532/2533
Amps Present Demand:
Channel 16
Present Current Demand
- Channel 16
AI100
Amps
5
2534/2535
Amps Present Demand:
Channel 17
Present Current Demand
- Channel 17
AI101
Amps
5
2536/2537
ZL0135-0A
Page 136 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
Amps Present Demand:
Channel 18
Present Current Demand
- Channel 18
AI102
Amps
5
2538/2539
Amps Present Demand:
Channel 19
Present Current Demand
- Channel 19
AI103
Amps
5
2540/2541
Amps Present Demand:
Channel 20
Present Current Demand
- Channel 20
AI104
Amps
5
2542/2543
Amps Present Demand:
Channel 21
Present Current Demand
- Channel 21
AI105
Amps
5
2544/2545
Amps Present Demand:
Channel 22
Present Current Demand
- Channel 22
AI106
Amps
5
2546/2547
Amps Present Demand:
Channel 23
Present Current Demand
- Channel 23
AI107
Amps
5
2548/2549
Amps Present Demand:
Channel 24
Present Current Demand
- Channel 24
AI108
Amps
5
2550/2551
Amps Present Demand:
Channel 25
Present Current Demand
- Channel 25
AI109
Amps
5
2552/2553
Amps Present Demand:
Channel 26
Present Current Demand
- Channel 26
AI110
Amps
5
2554/2555
Amps Present Demand:
Channel 27
Present Current Demand
- Channel 27
AI111
Amps
5
2556/2557
Amps Present Demand:
Channel 28
Present Current Demand
- Channel 28
AI112
Amps
5
2558/2559
Amps Present Demand:
Channel 29
Present Current Demand
- Channel 29
AI113
Amps
5
2560/2561
Amps Present Demand:
Channel 30
Present Current Demand
- Channel 30
AI114
Amps
5
2562/2563
Amps Present Demand:
Channel 31
Present Current Demand
- Channel 31
AI115
Amps
5
2564/2565
Amps Present Demand:
Channel 32
Present Current Demand
- Channel 32
AI116
Amps
5
2566/2567
Amps Present Demand:
Channel 33
Present Current Demand
- Channel 33
AI117
Amps
5
2568/2569
Amps Present Demand:
Channel 34
Present Current Demand
- Channel 34
AI118
Amps
5
2570/2571
Amps Present Demand:
Channel 35
Present Current Demand
- Channel 35
AI119
Amps
5
2572/2573
Amps Present Demand:
Channel 36
Present Current Demand
- Channel 36
AI120
Amps
5
2574/2575
Amps Present Demand:
Channel 37
Present Current Demand
- Channel 37
AI121
Amps
5
2576/2577
Amps Present Demand:
Channel 38
Present Current Demand
- Channel 38
AI122
Amps
5
2578/2579
Amps Present Demand:
Channel 39
Present Current Demand
- Channel 39
AI123
Amps
5
2580/2581
Amps Present Demand:
Channel 40
Present Current Demand
- Channel 40
AI124
Amps
5
2582/2583
Amps Present Demand:
Channel 41
Present Current Demand
- Channel 41
AI125
Amps
5
2584/2585
ZL0135-0A
Page 137 of 162
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
Amps Present Demand:
Channel 42
Present Current Demand
- Channel 42
AI126
Amps
5
2586/2587
Amps Max Demand:
Channel 1
Max Current Demand Channel 1
AI127
Amps
5
2588/2589
Amps Max Demand:
Channel 2
Max Current Demand Channel 2
AI128
Amps
5
2590/2591
Amps Max Demand:
Channel 3
Max Current Demand Channel 3
AI129
Amps
5
2592/2593
Amps Max Demand:
Channel 4
Max Current Demand Channel 4
AI130
Amps
5
2594/2595
Amps Max Demand:
Channel 5
Max Current Demand Channel 5
AI131
Amps
5
2596/2597
Amps Max Demand:
Channel 6
Max Current Demand Channel 6
AI132
Amps
5
2598/2599
Amps Max Demand:
Channel 7
Max Current Demand Channel 7
AI133
Amps
5
2600/2601
Amps Max Demand:
Channel 8
Max Current Demand Channel 8
AI134
Amps
5
2602/2603
Amps Max Demand:
Channel 9
Max Current Demand Channel 9
AI135
Amps
5
2604/2605
Amps Max Demand:
Channel 10
Max Current Demand Channel 10
AI136
Amps
5
2606/2607
Amps Max Demand:
Channel 11
Max Current Demand Channel 11
AI137
Amps
5
2608/2609
Amps Max Demand:
Channel 12
Max Current Demand Channel 12
AI138
Amps
5
2610/2611
Amps Max Demand:
Channel 13
Max Current Demand Channel 13
AI139
Amps
5
2612/2613
Amps Max Demand:
Channel 14
Max Current Demand Channel 14
AI140
Amps
5
2614/2615
Amps Max Demand:
Channel 15
Max Current Demand Channel 15
AI141
Amps
5
2616/2617
Amps Max Demand:
Channel 16
Max Current Demand Channel 16
AI142
Amps
5
2618/2619
Amps Max Demand:
Channel 17
Max Current Demand Channel 17
AI143
Amps
5
2620/2621
Amps Max Demand:
Channel 18
Max Current Demand Channel 18
AI144
Amps
5
2622/2623
Amps Max Demand:
Channel 19
Max Current Demand Channel 19
AI145
Amps
5
2624/2625
Amps Max Demand:
Channel 20
Max Current Demand Channel 20
AI146
Amps
5
2626/2627
Amps Max Demand:
Channel 21
Max Current Demand Channel 21
AI147
Amps
5
2628/2629
Amps Max Demand:
Channel 22
Max Current Demand Channel 22
AI148
Amps
5
2630/2631
Amps Max Demand:
Channel 23
Max Current Demand Channel 23
AI149
Amps
5
2632/2633
ZL0135-0A
Page 138 of 162
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Amps Max Demand:
Channel 24
Max Current Demand Channel 24
AI150
Amps
5
2634/2635
Amps Max Demand:
Channel 25
Max Current Demand Channel 25
AI151
Amps
5
2636/2637
Amps Max Demand:
Channel 26
Max Current Demand Channel 26
AI152
Amps
5
2638/2639
Amps Max Demand:
Channel 27
Max Current Demand Channel 27
AI153
Amps
5
2640/2641
Amps Max Demand:
Channel 28
Max Current Demand Channel 28
AI154
Amps
5
2642/2643
Amps Max Demand:
Channel 29
Max Current Demand Channel 29
AI155
Amps
5
2644/2645
Amps Max Demand:
Channel 30
Max Current Demand Channel 30
AI156
Amps
5
2646/2647
Amps Max Demand:
Channel 31
Max Current Demand Channel 31
AI157
Amps
5
2648/2649
Amps Max Demand:
Channel 32
Max Current Demand Channel 32
AI158
Amps
5
2650/2651
Amps Max Demand:
Channel 33
Max Current Demand Channel 33
AI159
Amps
5
2652/2653
Amps Max Demand:
Channel 34
Max Current Demand Channel 34
AI160
Amps
5
2654/2655
Amps Max Demand:
Channel 35
Max Current Demand Channel 35
AI161
Amps
5
2656/2657
Amps Max Demand:
Channel 36
Max Current Demand Channel 36
AI162
Amps
5
2658/2659
Amps Max Demand:
Channel 37
Max Current Demand Channel 37
AI163
Amps
5
2660/2661
Amps Max Demand:
Channel 38
Max Current Demand Channel 38
AI164
Amps
5
2662/2663
Amps Max Demand:
Channel 39
Max Current Demand Channel 39
AI165
Amps
5
2664/2665
Amps Max Demand:
Channel 40
Max Current Demand Channel 40
AI166
Amps
5
2666/2667
Amps Max Demand:
Channel 41
Max Current Demand Channel 41
AI167
Amps
5
2668/2669
Amps Max Demand:
Channel 42
Max Current Demand Channel 42
AI168
Amps
5
2670/2671
Max Amps: Channel 1
Max Instantaneous
Current - Channel 1
AI169
Amps
5
2756/2757
Max Amps: Channel 2
Max Instantaneous
Current - Channel 2
AI170
Amps
5
2758/2759
Max Amps: Channel 3
Max Instantaneous
Current - Channel 3
AI171
Amps
5
2760/2761
Max Amps: Channel 4
Max Instantaneous
Current - Channel 4
AI172
Amps
5
2762/2763
Max Amps: Channel 5
Max Instantaneous
Current - Channel 5
AI173
Amps
5
2764/2765
ZL0135-0A
Page 139 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Max Amps: Channel 6
Max Instantaneous
Current - Channel 6
AI174
Amps
5
2766/2767
Max Amps: Channel 7
Max Instantaneous
Current - Channel 7
AI175
Amps
5
2768/2769
Max Amps: Channel 8
Max Instantaneous
Current - Channel 8
AI176
Amps
5
2770/2771
Max Amps: Channel 9
Max Instantaneous
Current - Channel 9
AI177
Amps
5
2772/2773
Max Amps: Channel 10
Max Instantaneous
Current - Channel 10
AI178
Amps
5
2774/2775
Max Amps: Channel 11
Max Instantaneous
Current - Channel 11
AI179
Amps
5
2776/2777
Max Amps: Channel 12
Max Instantaneous
Current - Channel 12
AI180
Amps
5
2778/2779
Max Amps: Channel 13
Max Instantaneous
Current - Channel 13
AI181
Amps
5
2780/2781
Max Amps: Channel 14
Max Instantaneous
Current - Channel 14
AI182
Amps
5
2782/2783
Max Amps: Channel 15
Max Instantaneous
Current - Channel 15
AI183
Amps
5
2784/2785
Max Amps: Channel 16
Max Instantaneous
Current - Channel 16
AI184
Amps
5
2786/2787
Max Amps: Channel 17
Max Instantaneous
Current - Channel 17
AI185
Amps
5
2788/2789
Max Amps: Channel 18
Max Instantaneous
Current - Channel 18
AI186
Amps
5
2790/2791
Max Amps: Channel 19
Max Instantaneous
Current - Channel 19
AI187
Amps
5
2792/2793
Max Amps: Channel 20
Max Instantaneous
Current - Channel 20
AI188
Amps
5
2794/2795
Max Amps: Channel 21
Max Instantaneous
Current - Channel 21
AI189
Amps
5
2796/2797
Max Amps: Channel 22
Max Instantaneous
Current - Channel 22
AI190
Amps
5
2798/2799
Max Amps: Channel 23
Max Instantaneous
Current - Channel 23
AI191
Amps
5
2800/2801
Max Amps: Channel 24
Max Instantaneous
Current - Channel 24
AI192
Amps
5
2802/2803
Max Amps: Channel 25
Max Instantaneous
Current - Channel 25
AI193
Amps
5
2804/2805
Max Amps: Channel 26
Max Instantaneous
Current - Channel 26
AI194
Amps
5
2806/2807
Max Amps: Channel 27
Max Instantaneous
Current - Channel 27
AI195
Amps
5
2808/2809
Max Amps: Channel 28
Max Instantaneous
Current - Channel 28
AI196
Amps
5
2810/2811
Max Amps: Channel 29
Max Instantaneous
Current - Channel 29
AI197
Amps
5
2812/2813
ZL0135-0A
Page 140 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Max Amps: Channel 30
Max Instantaneous
Current - Channel 30
AI198
Amps
5
2814/2815
Max Amps: Channel 31
Max Instantaneous
Current - Channel 31
AI199
Amps
5
2816/2817
Max Amps: Channel 32
Max Instantaneous
Current - Channel 32
AI200
Amps
5
2818/2819
Max Amps: Channel 33
Max Instantaneous
Current - Channel 33
AI201
Amps
5
2820/2821
Max Amps: Channel 34
Max Instantaneous
Current - Channel 34
AI202
Amps
5
2822/2823
Max Amps: Channel 35
Max Instantaneous
Current - Channel 35
AI203
Amps
5
2824/2825
Max Amps: Channel 36
Max Instantaneous
Current - Channel 36
AI204
Amps
5
2826/2827
Max Amps: Channel 37
Max Instantaneous
Current - Channel 37
AI205
Amps
5
2828/2829
Max Amps: Channel 38
Max Instantaneous
Current - Channel 38
AI206
Amps
5
2830/2831
Max Amps: Channel 39
Max Instantaneous
Current - Channel 39
AI207
Amps
5
2832/2833
Max Amps: Channel 40
Max Instantaneous
Current - Channel 40
AI208
Amps
5
2834/2835
Max Amps: Channel 41
Max Instantaneous
Current - Channel 41
AI209
Amps
5
2836/2837
Max Amps: Channel 42
Max Instantaneous
Current - Channel 42
AI210
Amps
5
2838/2839
Configuration (bit 0 is
LSB):
Configuration (bit 0 is
LSB):
AV1
n/a
1
6
Bit 0: 0 = odd-even, 1 = sequential
Bit 1: 0 = odd-even, 1 = sequential
Bits 2-15: future use
Examples:
Value 0 = Odd/Even
Value 1 = Reserved for Solid-Core
Value 2 = Sequential
Value 3 = Reserved for Solid-Core
# of Sub-Intervals per
Demand Int.
Number of Sub-Interval
per Dem Interval
AV2
n/a
1
71
Sets the number of sub-intervals that make a single demand interval.
For block demand, set this to 1.
Sub-Interval Length in
seconds.
Sub-Interval Length in
seconds.
AV3
n/a
1
72
Sub-Interval Length in seconds. For sync-to-comms, set this to 0.
Branch 1 CT Size
Branch 1 CT Size
AV4
Amps
5
73
These are writable ONLY on E31Bxxx/E31Cxxx split-core models.
These are NOT WRITABLE on E30Bxxx/E30Cxxx solid-core models
because the CT size is fixed (at 100 A). Other values written revert to
100 A the next time the meter is scanned.
Branch 2 CT Size
Branch 2 CT Size
AV5
Amps
5
74
Branch 3 CT Size
Branch 3 CT Size
AV6
Amps
5
75
Branch 4 CT Size
Branch 4 CT Size
AV7
Amps
5
76
Branch 5 CT Size
Branch 5 CT Size
AV8
Amps
5
77
Branch 6 CT Size
Branch 6 CT Size
AV9
Amps
5
78
Analog_Value Objects
ZL0135-0A
Page 141 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 7 CT Size
Branch 7 CT Size
AV10
Amps
5
79
Branch 8 CT Size
Branch 8 CT Size
AV11
Amps
5
80
Branch 9 CT Size
Branch 9 CT Size
AV12
Amps
5
81
Branch 10 CT Size
Branch 10 CT Size
AV13
Amps
5
82
Branch 11 CT Size
Branch 11 CT Size
AV14
Amps
5
83
Branch 12 CT Size
Branch 12 CT Size
AV15
Amps
5
84
Branch 13 CT Size
Branch 13 CT Size
AV16
Amps
5
85
Branch 14 CT Size
Branch 14 CT Size
AV17
Amps
5
86
Branch 15 CT Size
Branch 15 CT Size
AV18
Amps
5
87
Branch 16 CT Size
Branch 16 CT Size
AV19
Amps
5
88
Branch 17 CT Size
Branch 17 CT Size
AV20
Amps
5
89
Branch 18 CT Size
Branch 18 CT Size
AV21
Amps
5
90
Branch 19 CT Size
Branch 19 CT Size
AV22
Amps
5
91
Branch 20 CT Size
Branch 20 CT Size
AV23
Amps
5
92
Branch 21 CT Size
Branch 21 CT Size
AV24
Amps
5
93
Branch 22 CT Size
Branch 22 CT Size
AV25
Amps
5
94
Branch 23 CT Size
Branch 23 CT Size
AV26
Amps
5
95
Branch 24 CT Size
Branch 24 CT Size
AV27
Amps
5
96
Branch 25 CT Size
Branch 25 CT Size
AV28
Amps
5
97
Branch 26 CT Size
Branch 26 CT Size
AV29
Amps
5
98
Branch 27 CT Size
Branch 27 CT Size
AV30
Amps
5
99
Branch 28 CT Size
Branch 28 CT Size
AV31
Amps
5
100
Branch 29 CT Size
Branch 29 CT Size
AV32
Amps
5
101
Branch 30 CT Size
Branch 30 CT Size
AV33
Amps
5
102
Branch 31 CT Size
Branch 31 CT Size
AV34
Amps
5
103
Branch 32 CT Size
Branch 32 CT Size
AV35
Amps
5
104
Branch 33 CT Size
Branch 33 CT Size
AV36
Amps
5
105
Branch 34 CT Size
Branch 34 CT Size
AV37
Amps
5
106
Branch 35 CT Size
Branch 35 CT Size
AV38
Amps
5
107
Branch 36 CT Size
Branch 36 CT Size
AV39
Amps
5
108
Branch 37 CT Size
Branch 37 CT Size
AV40
Amps
5
109
Branch 38 CT Size
Branch 38 CT Size
AV41
Amps
5
110
Branch 39 CT Size
Branch 39 CT Size
AV42
Amps
5
111
Branch 40 CT Size
Branch 40 CT Size
AV43
Amps
5
112
Branch 41 CT Size
Branch 41 CT Size
AV44
Amps
5
113
Branch 42 CT Size
Branch 42 CT Size
AV45
Amps
5
114
AUX Channel (phase 1)
CT Size
AUX Channel (phase 1)
CT Size
AV46
Amps
5
115
AUX Channel (phase 2)
CT Size
AUX Channel (phase 2)
CT Size
AV47
Amps
5
116
ZL0135-0A
Page 142 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
AUX Channel (phase 3)
CT Size
AUX Channel (phase 3)
CT Size
AV48
Amps
5
117
AUX Channel (Neutral)
CT Size
AUX Channel (Neutral)
CT Size
AV49
Amps
5
118
Branch 1 Breaker Size
Branch 1 Breaker Size
AV50
Amps
5
119
Branch 2 Breaker Size
Branch 2 Breaker Size
AV51
Amps
5
120
Branch 3 Breaker Size
Branch 3 Breaker Size
AV52
Amps
5
121
Branch 4 Breaker Size
Branch 4 Breaker Size
AV53
Amps
5
122
Branch 5 Breaker Size
Branch 5 Breaker Size
AV54
Amps
5
123
Branch 6 Breaker Size
Branch 6 Breaker Size
AV55
Amps
5
124
Branch 7 Breaker Size
Branch 7 Breaker Size
AV56
Amps
5
125
Branch 8 Breaker Size
Branch 8 Breaker Size
AV57
Amps
5
126
Branch 9 Breaker Size
Branch 9 Breaker Size
AV58
Amps
5
127
Branch 10 Breaker Size
Branch 10 Breaker Size
AV59
Amps
5
128
Branch 11 Breaker Size
Branch 11 Breaker Size
AV60
Amps
5
129
Branch 12 Breaker Size
Branch 12 Breaker Size
AV61
Amps
5
130
Branch 13 Breaker Size
Branch 13 Breaker Size
AV62
Amps
5
131
Branch 14 Breaker Size
Branch 14 Breaker Size
AV63
Amps
5
132
Branch 15 Breaker Size
Branch 15 Breaker Size
AV64
Amps
5
133
Branch 16 Breaker Size
Branch 16 Breaker Size
AV65
Amps
5
134
Branch 17 Breaker Size
Branch 17 Breaker Size
AV66
Amps
5
135
Branch 18 Breaker Size
Branch 18 Breaker Size
AV67
Amps
5
136
Branch 19 Breaker Size
Branch 19 Breaker Size
AV68
Amps
5
137
Branch 20 Breaker Size
Branch 20 Breaker Size
AV69
Amps
5
138
Branch 21 Breaker Size
Branch 21 Breaker Size
AV70
Amps
5
139
Branch 22 Breaker Size
Branch 22 Breaker Size
AV71
Amps
5
140
Branch 23 Breaker Size
Branch 23 Breaker Size
AV72
Amps
5
141
Branch 24 Breaker Size
Branch 24 Breaker Size
AV73
Amps
5
142
Branch 25 Breaker Size
Branch 25 Breaker Size
AV74
Amps
5
143
Branch 26 Breaker Size
Branch 26 Breaker Size
AV75
Amps
5
144
Branch 27 Breaker Size
Branch 27 Breaker Size
AV76
Amps
5
145
Branch 28 Breaker Size
Branch 28 Breaker Size
AV77
Amps
5
146
Branch 29 Breaker Size
Branch 29 Breaker Size
AV78
Amps
5
147
Branch 30 Breaker Size
Branch 30 Breaker Size
AV79
Amps
5
148
Branch 31 Breaker Size
Branch 31 Breaker Size
AV80
Amps
5
149
Branch 32 Breaker Size
Branch 32 Breaker Size
AV81
Amps
5
150
Branch 33 Breaker Size
Branch 33 Breaker Size
AV82
Amps
5
151
Branch 34 Breaker Size
Branch 34 Breaker Size
AV83
Amps
5
152
Branch 35 Breaker Size
Branch 35 Breaker Size
AV84
Amps
5
153
Branch 36 Breaker Size
Branch 36 Breaker Size
AV85
Amps
5
154
ZL0135-0A
Page 143 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Branch 37 Breaker Size
Branch 37 Breaker Size
AV86
Amps
5
155
Branch 38 Breaker Size
Branch 38 Breaker Size
AV87
Amps
5
156
Branch 39 Breaker Size
Branch 39 Breaker Size
AV88
Amps
5
157
Branch 40 Breaker Size
Branch 40 Breaker Size
AV89
Amps
5
158
Branch 41 Breaker Size
Branch 41 Breaker Size
AV90
Amps
5
159
Branch 42 Breaker Size
Branch 42 Breaker Size
AV91
Amps
5
160
AUX Channel (phase 1)
Breaker Size
AUX Channel (phase 1)
Breaker Size
AV92
Amps
5
161
AUX Channel (phase 2)
Breaker Size
AUX Channel (phase 2)
Breaker Size
AV93
Amps
5
162
AUX Channel (phase 3)
Breaker Size
AUX Channel (phase 3)
Breaker Size
AV94
Amps
5
163
AUX Channel (Neutral)
Breaker Size
AUX Channel (Neutral)
Breaker Size
AV95
Amps
5
164
High-High Latching
Alarm Time Delay
Alarm event duration
threshold
AV96
Seconds
1
165
High Latching Alarm
Time Delay
Alarm event duration
threshold
AV97
Seconds
1
166
Low Latching Alarm
Time Delay
Alarm event duration
threshold
AV98
Seconds
1
167
Low-Low Latching Alarm Alarm event duration
Time Delay
threshold
AV99
Seconds
1
168
Latching Alarm ON Time
From initial current to
alarms enabled
AV100
Seconds
1
169
Latching Alarm ON Time (when current is above Low-Low alarm and
ON Time elapses then ON state is declared for all latching alarms, ON
State enables Alarm Time Delays)
Latching Alarms time
until OFF state
time until OFF state
declared
AV101
Seconds
1
170
Latching Alarms time until OFF state is declared for all latching alarms
(when current is below Low-Low alarm and ON state was declared)
High-High Latching
Alarm Threshold
% of breaker size
AV102
Percent
1
171
High Alarm Latching
Alarm Threshold
% of breaker size
AV103
Percent
1
172
Low Alarm Latching
Alarm Threshold
% of breaker size
AV104
Percent
1
173
Low Low Latching Alarm
Threshold
% of breaker size
AV105
Percent
1
174
Non-Latching High
Threshold
% of breaker size
AV106
Percent
1
175
Non-Latching Low
Threshold
% of breaker size
AV107
Percent
1
176
Non-Latching Hysteresis
(0-100%)
Non-Latching Hysteresis
(% of setpoint)
AV108
Percent
1
177
ZL0135-0A
Page 144 of 162
These timers control entry into a latching alarm state. A return to a
non-alarm state is instantaneous. All channels use the same global
timers. Latching Alarm On Time applies to all Latching Alarms. The
parameter measurement rate is expected to be approximately 2.5
sec, which limits the effective resolution of these timers.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 1 Alarm Status
Write 0 to alarm bits to
clear alarms
AV109
n/a
1
178
Branch 2 Alarm Status
Write 0 to alarm bits to
clear alarms
AV110
n/a
1
179
Branch 3 Alarm Status
Write 0 to alarm bits to
clear alarms
AV111
n/a
1
180
Branch 4 Alarm Status
Write 0 to alarm bits to
clear alarms
AV112
n/a
1
181
Branch 5 Alarm Status
Write 0 to alarm bits to
clear alarms
AV113
n/a
1
182
Branch 6 Alarm Status
Write 0 to alarm bits to
clear alarms
AV114
n/a
1
183
Branch 7 Alarm Status
Write 0 to alarm bits to
clear alarms
AV115
n/a
1
184
Branch 8 Alarm Status
Write 0 to alarm bits to
clear alarms
AV116
n/a
1
185
Branch 9 Alarm Status
Write 0 to alarm bits to
clear alarms
AV117
n/a
1
186
Branch 10 Alarm Status
Write 0 to alarm bits to
clear alarms
AV118
n/a
1
187
Branch 11 Alarm Status
Write 0 to alarm bits to
clear alarms
AV119
n/a
1
188
Branch 12 Alarm Status
Write 0 to alarm bits to
clear alarms
AV120
n/a
1
189
Branch 13 Alarm Status
Write 0 to alarm bits to
clear alarms
AV121
n/a
1
190
Branch 14 Alarm Status
Write 0 to alarm bits to
clear alarms
AV122
n/a
1
191
Branch 15 Alarm Status
Write 0 to alarm bits to
clear alarms
AV123
n/a
1
192
Branch 16 Alarm Status
Write 0 to alarm bits to
clear alarms
AV124
n/a
1
193
Branch 17 Alarm Status
Write 0 to alarm bits to
clear alarms
AV125
n/a
1
194
Branch 18 Alarm Status
Write 0 to alarm bits to
clear alarms
AV126
n/a
1
195
Branch 19 Alarm Status
Write 0 to alarm bits to
clear alarms
AV127
n/a
1
196
Branch 20 Alarm Status
Write 0 to alarm bits to
clear alarms
AV128
n/a
1
197
ZL0135-0A
Page 145 of 162
Comments
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to a
Non-Latching alarm is ignored.
Bit 0: High High Latching Alarm
Bit 1: High Latching Alarm
Bit 2: Low Latching Alarm
Bit 3: Low Low Latching Alarm
Bit 4: Latching Alarm OFF state declared (1=OFF; ON state must have
been achieved prior)
Bit 5-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Branch 21 Alarm Status
Write 0 to alarm bits to
clear alarms
AV129
n/a
1
198
Branch 22 Alarm Status
Write 0 to alarm bits to
clear alarms
AV130
n/a
1
199
Branch 23 Alarm Status
Write 0 to alarm bits to
clear alarms
AV131
n/a
1
200
Branch 24 Alarm Status
Write 0 to alarm bits to
clear alarms
AV132
n/a
1
201
Branch 25 Alarm Status
Write 0 to alarm bits to
clear alarms
AV133
n/a
1
202
Branch 26 Alarm Status
Write 0 to alarm bits to
clear alarms
AV134
n/a
1
203
Branch 27 Alarm Status
Write 0 to alarm bits to
clear alarms
AV135
n/a
1
204
Branch 28 Alarm Status
Write 0 to alarm bits to
clear alarms
AV136
n/a
1
205
Branch 29 Alarm Status
Write 0 to alarm bits to
clear alarms
AV137
n/a
1
206
Branch 30 Alarm Status
Write 0 to alarm bits to
clear alarms
AV138
n/a
1
207
Branch 31 Alarm Status
Write 0 to alarm bits to
clear alarms
AV139
n/a
1
208
Branch 32 Alarm Status
Write 0 to alarm bits to
clear alarms
AV140
n/a
1
209
Branch 33 Alarm Status
Write 0 to alarm bits to
clear alarms
AV141
n/a
1
210
Branch 34 Alarm Status
Write 0 to alarm bits to
clear alarms
AV142
n/a
1
211
Branch 35 Alarm Status
Write 0 to alarm bits to
clear alarms
AV143
n/a
1
212
Branch 36 Alarm Status
Write 0 to alarm bits to
clear alarms
AV144
n/a
1
213
Branch 37 Alarm Status
Write 0 to alarm bits to
clear alarms
AV145
n/a
1
214
Branch 38 Alarm Status
Write 0 to alarm bits to
clear alarms
AV146
n/a
1
215
Branch 39 Alarm Status
Write 0 to alarm bits to
clear alarms
AV147
n/a
1
216
Branch 40 Alarm Status
Write 0 to alarm bits to
clear alarms
AV148
n/a
1
217
Branch 41 Alarm Status
Write 0 to alarm bits to
clear alarms
AV149
n/a
1
218
Branch 42 Alarm Status
Write 0 to alarm bits to
clear alarms
AV150
n/a
1
219
AUX Channel (phase 1)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV151
n/a
1
220
AUX Channel (phase 2)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV152
n/a
1
221
ZL0135-0A
Page 146 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
AUX Channel (phase 3)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV153
n/a
1
222
AUX Channel (Neutral)
Alarm Status
Write 0 to alarm bits to
clear alarms
AV154
n/a
1
223
Overvoltage Alarm Timer Alarm event duration
threshold
AV155
Seconds
1
236
Not used on E3xCxxx models; reports QNAN
Controls entry into Overvoltage alarm state. A return to a non-alarm
state is instantaneous. All channels use these same global timers.
Note that the parameter measurement update rate is 1.6 sec, which
limits the effective resolution of these timers.
Undervoltage Alarm
Timer
Alarm event duration
threshold
AV156
Seconds
1
237
Not used on E3xCxxx models; reports QNAN
Controls entry into Undervoltage alarm state. A return to a non-alarm
state is instantaneous. All channels use these same global timers.
Note that the parameter measurement update rate is 1.6 sec, which
limits the effective resolution of these timers.
Overvoltage Alarm
Threshold
Overvoltage level
threshold (0=OFF)
AV157
Volts
5
238
Not used on E3xCxxx models; reports QNAN
Undervoltage Alarm
Threshold
Undervoltage level
threshold (0=OFF)
AV158
Volts
5
239
Not used on E3xCxxx models; reports QNAN
Voltage Alarm Hysteresis Voltage Alarm Hysteresis AV159
(% of setpoint)
Percent
1
240
Not used on E3xCxxx models; reports QNAN Percentage of setpoint
Voltage 1 Alarm Status
Write 0 to alarm bits to
clear alarms
AV160
n/a
1
241
Not used on E3xCxxx models; reports QNAN
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Voltage 2 Alarm Status
Write 0 to alarm bits to
clear alarms
AV161
n/a
1
242
Not used on E3xCxxx models; reports QNAN
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Voltage 3 Alarm Status
Write 0 to alarm bits to
clear alarms
AV162
n/a
1
243
Not used on E3xCxxx models; reports QNAN
Latching Alarms are cleared by writing a 0 to its alarm bit. Writing to
Non-Latching alarm is ignored.
Bit 0: High Latching Alarm
Bit 1: Low Latching Alarm
Bit 2-7: Reserved for future use (reads 0)
Bit 8: High Non-Latching Alarm
Bit 9: Low Non-Latching Alarm
Bit 10-15: Reserved for future use (reads 0)
Power Up Counter
Power Up Counter
AV163
n/a
1
531
Number of power-up cycles (write 0 to reset)
User Defined Status
Register
1 in bit 0 enables CT
phase assignment
AV164
n/a
1
62017
User Defined Status Register:
Bit 0: Enable User CT Phase Assignment
Bit 1-15: Reserved
ZL0135-0A
Page 147 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Comments
Analog_Output objects
AUX Resets: Write value
to reset
10203=kWh,
29877=Max Current &
Max kW
AO1
n/a
1
294
Write the listed value to perform the corresponding reset:
10203 = Clear kWh value to zero
29877 = Clear Max Current and Max kW values to zero
Global Resets: Write
value to reset
10203=kWh, others…
AO2
n/a
1
295
Write the listed value to perform the corresponding reset:
26012 = Begin new Demand Sub-interval
26013 = Reset Demand
31010 = Reset all Latching Alarms
10203 = Clear all kWh values to zero
29877 = Clear all Max Current and Max kW values to zero
20097 = Clear all Max Demand values to zero
Channel 1 Reset
10203=kWh,
29877=Max Current &
Max kW
AO3
n/a
1
1126
Write the listed value to perform the corresponding reset:
10203 = Clear kWh value to zero
29877 = Clear Max Current and Max kW values to zero
Channel 2 Reset
10203=kWh,
29877=Max Current &
Max kW
AO4
n/a
1
1127
Channel 3 Reset
10203=kWh,
29877=Max Current &
Max kW
AO5
n/a
1
1128
Channel 4 Reset
10203=kWh,
29877=Max Current &
Max kW
AO6
n/a
1
1129
Channel 5 Reset
10203=kWh,
29877=Max Current &
Max kW
AO7
n/a
1
1130
Channel 6 Reset
10203=kWh,
29877=Max Current &
Max kW
AO8
n/a
1
1131
Channel 7 Reset
10203=kWh,
29877=Max Current &
Max kW
AO9
n/a
1
1132
Channel 8 Reset
10203=kWh,
29877=Max Current &
Max kW
AO10
n/a
1
1133
Channel 9 Reset
10203=kWh,
29877=Max Current &
Max kW
AO11
n/a
1
1134
Channel 10 Reset
10203=kWh,
29877=Max Current &
Max kW
AO12
n/a
1
1135
Channel 11 Reset
10203=kWh,
29877=Max Current &
Max kW
AO13
n/a
1
1136
Channel 12 Reset
10203=kWh,
29877=Max Current &
Max kW
AO14
n/a
1
1137
Channel 13 Reset
10203=kWh,
29877=Max Current &
Max kW
AO15
n/a
1
1138
ZL0135-0A
Page 148 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Channel 14 Reset
10203=kWh,
29877=Max Current &
Max kW
AO16
n/a
1
1139
Channel 15 Reset
10203=kWh,
29877=Max Current &
Max kW
AO17
n/a
1
1140
Channel 16 Reset
10203=kWh,
29877=Max Current &
Max kW
AO18
n/a
1
1141
Channel 17 Reset
10203=kWh,
29877=Max Current &
Max kW
AO19
n/a
1
1142
Channel 18 Reset
10203=kWh,
29877=Max Current &
Max kW
AO20
n/a
1
1143
Channel 19 Reset
10203=kWh,
29877=Max Current &
Max kW
AO21
n/a
1
1144
Channel 20 Reset
10203=kWh,
29877=Max Current &
Max kW
AO22
n/a
1
1145
Channel 21 Reset
10203=kWh,
29877=Max Current &
Max kW
AO23
n/a
1
1146
Channel 22 Reset
10203=kWh,
29877=Max Current &
Max kW
AO24
n/a
1
1147
Channel 23 Reset
10203=kWh,
29877=Max Current &
Max kW
AO25
n/a
1
1148
Channel 24 Reset
10203=kWh,
29877=Max Current &
Max kW
AO26
n/a
1
1149
Channel 25 Reset
10203=kWh,
29877=Max Current &
Max kW
AO27
n/a
1
1150
Channel 26 Reset
10203=kWh,
29877=Max Current &
Max kW
AO28
n/a
1
1151
Channel 27 Reset
10203=kWh,
29877=Max Current &
Max kW
AO29
n/a
1
1152
Channel 28 Reset
10203=kWh,
29877=Max Current &
Max kW
AO30
n/a
1
1153
Channel 29 Reset
10203=kWh,
29877=Max Current &
Max kW
AO31
n/a
1
1154
Channel 30 Reset
10203=kWh,
29877=Max Current &
Max kW
AO32
n/a
1
1155
ZL0135-0A
Page 149 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
E3xCxxx Branch Circuit Meters, cont.
Data Variable
Description
BACnet
Object
Units
COV_
Increment
Modbus
Address
Channel 31 Reset
10203=kWh,
29877=Max Current &
Max kW
AO33
n/a
1
1156
Channel 32 Reset
10203=kWh,
29877=Max Current &
Max kW
AO34
n/a
1
1157
Channel 33 Reset
10203=kWh,
29877=Max Current &
Max kW
AO35
n/a
1
1158
Channel 34 Reset
10203=kWh,
29877=Max Current &
Max kW
AO36
n/a
1
1159
Channel 35 Reset
10203=kWh,
29877=Max Current &
Max kW
AO37
n/a
1
1160
Channel 36 Reset
10203=kWh,
29877=Max Current &
Max kW
AO38
n/a
1
1161
Channel 37 Reset
10203=kWh,
29877=Max Current &
Max kW
AO39
n/a
1
1162
Channel 38 Reset
10203=kWh,
29877=Max Current &
Max kW
AO40
n/a
1
1163
Channel 39 Reset
10203=kWh,
29877=Max Current &
Max kW
AO41
n/a
1
1164
Channel 40 Reset
10203=kWh,
29877=Max Current &
Max kW
AO42
n/a
1
1165
Channel 41 Reset
10203=kWh,
29877=Max Current &
Max kW
AO43
n/a
1
1166
Channel 42 Reset
10203=kWh,
29877=Max Current &
Max kW
AO44
n/a
1
1167
ZL0135-0A
Page 150 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors
The H704 solid-core and the H663 split core families monitor Branch current up to 50A or 100A (H models).
The H704 and H663 meters have 356 data objects. They use a single Modbus Address and operate at 2400, 4800, 9600 or 19200 baud.
Data Variable
Description
“BACnet
Object”
Units
“ COV
“Modbus
Increment” Address”
Comments
Analog_Input Objects
Amps: Channel 1
Instantaneous Current Channel 1
AI1
Amperes
5
1
Amps: Channel 2
Instantaneous Current Channel 2
AI2
Amperes
5
2
Amps: Channel 3
Instantaneous Current Channel 3
AI3
Amperes
5
3
Amps: Channel 4
Instantaneous Current Channel 4
AI4
Amperes
5
4
Amps: Channel 5
Instantaneous Current Channel 5
AI5
Amperes
5
5
Amps: Channel 6
Instantaneous Current Channel 6
AI6
Amperes
5
6
Amps: Channel 7
Instantaneous Current Channel 7
AI7
Amperes
5
7
Amps: Channel 8
Instantaneous Current Channel 8
AI8
Amperes
5
8
Amps: Channel 9
Instantaneous Current Channel 9
AI9
Amperes
5
9
Amps: Channel 10
Instantaneous Current Channel 10
AI10
Amperes
5
10
Amps: Channel 11
Instantaneous Current Channel 11
AI11
Amperes
5
11
Amps: Channel 12
Instantaneous Current Channel 12
AI12
Amperes
5
12
Amps: Channel 13
Instantaneous Current Channel 13
AI13
Amperes
5
13
Amps: Channel 14
Instantaneous Current Channel 14
AI14
Amperes
5
14
Amps: Channel 15
Instantaneous Current Channel 15
AI15
Amperes
5
15
Amps: Channel 16
Instantaneous Current Channel 16
AI16
Amperes
5
16
Amps: Channel 17
Instantaneous Current Channel 17
AI17
Amperes
5
17
Amps: Channel 18
Instantaneous Current Channel 18
AI18
Amperes
5
18
Amps: Channel 19
Instantaneous Current Channel 19
AI19
Amperes
5
19
Amps: Channel 20
Instantaneous Current Channel 20
AI20
Amperes
5
20
Amps: Channel 21
Instantaneous Current Channel 21
AI21
Amperes
5
21
Amps: Channel 22
Instantaneous Current Channel 22
AI22
Amperes
5
22
Amps: Channel 23
Instantaneous Current Channel 23
AI23
Amperes
5
23
Amps: Channel 24
Instantaneous Current Channel 24
AI24
Amperes
5
24
Amps: Channel 25
Instantaneous Current Channel 25
AI25
Amperes
5
25
Amps: Channel 26
Instantaneous Current Channel 26
AI26
Amperes
5
26
Amps: Channel 27
Instantaneous Current Channel 27
AI27
Amperes
5
27
Amps: Channel 28
Instantaneous Current Channel 28
AI28
Amperes
5
28
Amps: Channel 29
Instantaneous Current Channel 29
AI29
Amperes
5
29
Amps: Channel 30
Instantaneous Current Channel 30
AI30
Amperes
5
30
Amps: Channel 31
Instantaneous Current Channel 31
AI31
Amperes
5
31
Amps: Channel 32
Instantaneous Current Channel 32
AI32
Amperes
5
32
Amps: Channel 33
Instantaneous Current Channel 33
AI33
Amperes
5
33
Amps: Channel 34
Instantaneous Current Channel 34
AI34
Amperes
5
34
Amps: Channel 35
Instantaneous Current Channel 35
AI35
Amperes
5
35
Amps: Channel 36
Instantaneous Current Channel 36
AI36
Amperes
5
36
Amps: Channel 37
Instantaneous Current Channel 37
AI37
Amperes
5
37
ZL0135-0A
Page 151 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Amps: Channel 38
Description
Instantaneous Current Channel 38
“BACnet
Object”
AI38
Units
Amperes
“ COV
“Modbus
Increment” Address”
5
Comments
38
Amps: Channel 39
Instantaneous Current Channel 39
AI39
Amperes
5
39
Amps: Channel 40
Instantaneous Current Channel 40
AI40
Amperes
5
40
Amps: Channel 41
Instantaneous Current Channel 41
AI41
Amperes
5
41
Amps: Channel 42
Instantaneous Current Channel 42
AI42
Amperes
5
42
Global Alarm Register
bitmap of active registers (0=Normal)
AI43
No-Units
1
43
Firmware Revision RS
Firmware Revision RS
AI44
No-Units
1
50
Firmware Revision OS
Firmware Revision OS
AI45
No-Units
1
51
Serial Number MSW
Serial Number MSW
AI46
No-Units
1
262
Serial Number LSW
Serial Number LSW
AI47
No-Units
1
263
Device ID:
15026=BCM
AI48
No-Units
1
273
1st two ASCII Characters (ie - BR)
AV1
No-Units
1
274
Analog_Value Objects
Board Name MSW
Board Name LSW
2nd two ASCII Characters (ie - D1)
AV2
No-Units
1
275
Latched Warning Alarm Register A
Ch 1-16 (0=OK); summary of BV1-BV16
AV3
No-Units
1
44
Latched Warning Alarm Register B
Ch 17-32 (0=OK); summary of BV17-BV32
AV4
No-Units
1
45
Latched Warning Alarm Register C
Ch 33-42 (0=OK); summary of BV33-BV42
AV5
No-Units
1
46
Latched Critical Alarm Register A
Ch 1-16 (0=OK); summary of BV43-BV58
AV6
No-Units
1
47
Latched Critical Alarm Register B
Ch 17-32 (0=OK); summary of BV59-BV74
AV7
No-Units
1
48
Latched Critical Alarm Register C
Ch 33-42 (0=OK); summary of BV75-BV84
AV8
No-Units
1
49
Breaker Size: Channel 1
Current Rating Channel 1
AV9
Amperes
1
52
Breaker Size: Channel 2
Current Rating Channel 2
AV10
Amperes
1
53
Breaker Size: Channel 3
Current Rating Channel 3
AV11
Amperes
1
54
Breaker Size: Channel 4
Current Rating Channel 4
AV12
Amperes
1
55
Breaker Size: Channel 5
Current Rating Channel 5
AV13
Amperes
1
56
Breaker Size: Channel 6
Current Rating Channel 6
AV14
Amperes
1
57
Breaker Size: Channel 7
Current Rating Channel 7
AV15
Amperes
1
58
Breaker Size: Channel 8
Current Rating Channel 8
AV16
Amperes
1
59
Breaker Size: Channel 9
Current Rating Channel 9
AV17
Amperes
1
60
Breaker Size: Channel 10
Current Rating Channel 10
AV18
Amperes
1
61
Breaker Size: Channel 11
Current Rating Channel 11
AV19
Amperes
1
62
Breaker Size: Channel 12
Current Rating Channel 12
AV20
Amperes
1
63
Breaker Size: Channel 13
Current Rating Channel 13
AV21
Amperes
1
64
Breaker Size: Channel 14
Current Rating Channel 14
AV22
Amperes
1
65
Breaker Size: Channel 15
Current Rating Channel 15
AV23
Amperes
1
66
Breaker Size: Channel 16
Current Rating Channel 16
AV24
Amperes
1
67
Breaker Size: Channel 17
Current Rating Channel 17
AV25
Amperes
1
68
Breaker Size: Channel 18
Current Rating Channel 18
AV26
Amperes
1
69
Breaker Size: Channel 19
Current Rating Channel 19
AV27
Amperes
1
70
Breaker Size: Channel 20
Current Rating Channel 20
AV28
Amperes
1
71
Breaker Size: Channel 21
Current Rating Channel 21
AV29
Amperes
1
72
ZL0135-0A
Page 152 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Breaker Size: Channel 22
Description
Current Rating Channel 22
“BACnet
Object”
AV30
Units
Amperes
“ COV
“Modbus
Increment” Address”
1
73
Breaker Size: Channel 23
Current Rating Channel 23
AV31
Amperes
1
74
Breaker Size: Channel 24
Current Rating Channel 24
AV32
Amperes
1
75
Breaker Size: Channel 25
Current Rating Channel 25
AV33
Amperes
1
76
Breaker Size: Channel 26
Current Rating Channel 26
AV34
Amperes
1
77
Breaker Size: Channel 27
Current Rating Channel 27
AV35
Amperes
1
78
Breaker Size: Channel 28
Current Rating Channel 28
AV36
Amperes
1
79
Breaker Size: Channel 29
Current Rating Channel 29
AV37
Amperes
1
80
Breaker Size: Channel 30
Current Rating Channel 30
AV38
Amperes
1
81
Breaker Size: Channel 31
Current Rating Channel 31
AV39
Amperes
1
82
Breaker Size: Channel 32
Current Rating Channel 32
AV40
Amperes
1
83
Breaker Size: Channel 33
Current Rating Channel 33
AV41
Amperes
1
84
Breaker Size: Channel 34
Current Rating Channel 34
AV42
Amperes
1
85
Breaker Size: Channel 35
Current Rating Channel 35
AV43
Amperes
1
86
Breaker Size: Channel 36
Current Rating Channel 36
AV44
Amperes
1
87
Breaker Size: Channel 37
Current Rating Channel 37
AV45
Amperes
1
88
Breaker Size: Channel 38
Current Rating Channel 38
AV46
Amperes
1
89
Breaker Size: Channel 39
Current Rating Channel 39
AV47
Amperes
1
90
Breaker Size: Channel 40
Current Rating Channel 40
AV48
Amperes
1
91
Breaker Size: Channel 41
Current Rating Channel 41
AV49
Amperes
1
92
Breaker Size: Channel 42
Current Rating Channel 42
AV50
Amperes
1
93
Warning Threshold: Channel 1
% (0-100) of Breaker Size - Ch 1
AV51
Percent
1
94
Warning Threshold: Channel 2
% (0-100) of Breaker Size - Ch 2
AV52
Percent
1
95
Warning Threshold: Channel 3
% (0-100) of Breaker Size - Ch 3
AV53
Percent
1
96
Warning Threshold: Channel 4
% (0-100) of Breaker Size - Ch 4
AV54
Percent
1
97
Warning Threshold: Channel 5
% (0-100) of Breaker Size - Ch 5
AV55
Percent
1
98
Warning Threshold: Channel 6
% (0-100) of Breaker Size - Ch 6
AV56
Percent
1
99
Warning Threshold: Channel 7
% (0-100) of Breaker Size - Ch 7
AV57
Percent
1
100
Warning Threshold: Channel 8
% (0-100) of Breaker Size - Ch 8
AV58
Percent
1
101
Warning Threshold: Channel 9
% (0-100) of Breaker Size - Ch 9
AV59
Percent
1
102
Warning Threshold: Channel 10
% (0-100) of Breaker Size - Ch 10
AV60
Percent
1
103
Warning Threshold: Channel 11
% (0-100) of Breaker Size - Ch 11
AV61
Percent
1
104
Warning Threshold: Channel 12
% (0-100) of Breaker Size - Ch 12
AV62
Percent
1
105
Warning Threshold: Channel 13
% (0-100) of Breaker Size - Ch 13
AV63
Percent
1
106
Warning Threshold: Channel 14
% (0-100) of Breaker Size - Ch 14
AV64
Percent
1
107
Warning Threshold: Channel 15
% (0-100) of Breaker Size - Ch 15
AV65
Percent
1
108
Warning Threshold: Channel 16
% (0-100) of Breaker Size - Ch 16
AV66
Percent
1
109
Warning Threshold: Channel 17
% (0-100) of Breaker Size - Ch 17
AV67
Percent
1
110
Warning Threshold: Channel 18
% (0-100) of Breaker Size - Ch 18
AV68
Percent
1
111
Warning Threshold: Channel 19
% (0-100) of Breaker Size - Ch 19
AV69
Percent
1
112
Warning Threshold: Channel 20
% (0-100) of Breaker Size - Ch 20
AV70
Percent
1
113
ZL0135-0A
Page 153 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Description
“BACnet
Object”
Units
“ COV
“Modbus
Increment” Address”
Warning Threshold: Channel 21
% (0-100) of Breaker Size - Ch 21
AV71
Percent
1
114
Warning Threshold: Channel 22
% (0-100) of Breaker Size - Ch 22
AV72
Percent
1
115
Warning Threshold: Channel 23
% (0-100) of Breaker Size - Ch 23
AV73
Percent
1
116
Warning Threshold: Channel 24
% (0-100) of Breaker Size - Ch 24
AV74
Percent
1
117
Warning Threshold: Channel 25
% (0-100) of Breaker Size - Ch 25
AV75
Percent
1
118
Warning Threshold: Channel 26
% (0-100) of Breaker Size - Ch 26
AV76
Percent
1
119
Warning Threshold: Channel 27
% (0-100) of Breaker Size - Ch 27
AV77
Percent
1
120
Warning Threshold: Channel 28
% (0-100) of Breaker Size - Ch 28
AV78
Percent
1
121
Warning Threshold: Channel 29
% (0-100) of Breaker Size - Ch 29
AV79
Percent
1
122
Warning Threshold: Channel 30
% (0-100) of Breaker Size - Ch 30
AV80
Percent
1
123
Warning Threshold: Channel 31
% (0-100) of Breaker Size - Ch 31
AV81
Percent
1
124
Warning Threshold: Channel 32
% (0-100) of Breaker Size - Ch 32
AV82
Percent
1
125
Warning Threshold: Channel 33
% (0-100) of Breaker Size - Ch 33
AV83
Percent
1
126
Warning Threshold: Channel 34
% (0-100) of Breaker Size - Ch 34
AV84
Percent
1
127
Warning Threshold: Channel 35
% (0-100) of Breaker Size - Ch 35
AV85
Percent
1
128
Warning Threshold: Channel 36
% (0-100) of Breaker Size - Ch 36
AV86
Percent
1
129
Warning Threshold: Channel 37
% (0-100) of Breaker Size - Ch 37
AV87
Percent
1
130
Warning Threshold: Channel 38
% (0-100) of Breaker Size - Ch 38
AV88
Percent
1
131
Warning Threshold: Channel 39
% (0-100) of Breaker Size - Ch 39
AV89
Percent
1
132
Warning Threshold: Channel 40
% (0-100) of Breaker Size - Ch 40
AV90
Percent
1
133
Warning Threshold: Channel 41
% (0-100) of Breaker Size - Ch 41
AV91
Percent
1
134
Warning Threshold: Channel 42
% (0-100) of Breaker Size - Ch 42
AV92
Percent
1
135
Critical Alarm Threshold: Channel 1
% (0-100) of Breaker Size - Ch 1
AV93
Percent
1
136
Critical Alarm Threshold: Channel 2
% (0-100) of Breaker Size - Ch 2
AV94
Percent
1
137
Critical Alarm Threshold: Channel 3
% (0-100) of Breaker Size - Ch 3
AV95
Percent
1
138
Critical Alarm Threshold: Channel 4
% (0-100) of Breaker Size - Ch 4
AV96
Percent
1
139
Critical Alarm Threshold: Channel 5
% (0-100) of Breaker Size - Ch 5
AV97
Percent
1
140
Critical Alarm Threshold: Channel 6
% (0-100) of Breaker Size - Ch 6
AV98
Percent
1
141
Critical Alarm Threshold: Channel 7
% (0-100) of Breaker Size - Ch 7
AV99
Percent
1
142
Critical Alarm Threshold: Channel 8
% (0-100) of Breaker Size - Ch 8
AV100
Percent
1
143
Critical Alarm Threshold: Channel 9
% (0-100) of Breaker Size - Ch 9
AV101
Percent
1
144
Critical Alarm Threshold: Channel 10
% (0-100) of Breaker Size - Ch 10
AV102
Percent
1
145
Critical Alarm Threshold: Channel 11
% (0-100) of Breaker Size - Ch 11
AV103
Percent
1
146
Critical Alarm Threshold: Channel 12
% (0-100) of Breaker Size - Ch 12
AV104
Percent
1
147
Critical Alarm Threshold: Channel 13
% (0-100) of Breaker Size - Ch 13
AV105
Percent
1
148
Critical Alarm Threshold: Channel 14
% (0-100) of Breaker Size - Ch 14
AV106
Percent
1
149
Critical Alarm Threshold: Channel 15
% (0-100) of Breaker Size - Ch 15
AV107
Percent
1
150
Critical Alarm Threshold: Channel 16
% (0-100) of Breaker Size - Ch 16
AV108
Percent
1
151
Critical Alarm Threshold: Channel 17
% (0-100) of Breaker Size - Ch 17
AV109
Percent
1
152
Critical Alarm Threshold: Channel 18
% (0-100) of Breaker Size - Ch 18
AV110
Percent
1
153
Critical Alarm Threshold: Channel 19
% (0-100) of Breaker Size - Ch 19
AV111
Percent
1
154
ZL0135-0A
Page 154 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Critical Alarm Threshold: Channel 20
Description
% (0-100) of Breaker Size - Ch 20
“BACnet
Object”
AV112
Units
Percent
“ COV
“Modbus
Increment” Address”
1
155
Critical Alarm Threshold: Channel 21
% (0-100) of Breaker Size - Ch 21
AV113
Percent
1
156
Critical Alarm Threshold: Channel 22
% (0-100) of Breaker Size - Ch 22
AV114
Percent
1
157
Critical Alarm Threshold: Channel 23
% (0-100) of Breaker Size - Ch 23
AV115
Percent
1
158
Critical Alarm Threshold: Channel 24
% (0-100) of Breaker Size - Ch 24
AV116
Percent
1
159
Critical Alarm Threshold: Channel 25
% (0-100) of Breaker Size - Ch 25
AV117
Percent
1
160
Critical Alarm Threshold: Channel 26
% (0-100) of Breaker Size - Ch 26
AV118
Percent
1
161
Critical Alarm Threshold: Channel 27
% (0-100) of Breaker Size - Ch 27
AV119
Percent
1
162
Critical Alarm Threshold: Channel 28
% (0-100) of Breaker Size - Ch 28
AV120
Percent
1
163
Critical Alarm Threshold: Channel 29
% (0-100) of Breaker Size - Ch 29
AV121
Percent
1
164
Critical Alarm Threshold: Channel 30
% (0-100) of Breaker Size - Ch 30
AV122
Percent
1
165
Critical Alarm Threshold: Channel 31
% (0-100) of Breaker Size - Ch 31
AV123
Percent
1
166
Critical Alarm Threshold: Channel 32
% (0-100) of Breaker Size - Ch 32
AV124
Percent
1
167
Critical Alarm Threshold: Channel 33
% (0-100) of Breaker Size - Ch 33
AV125
Percent
1
168
Critical Alarm Threshold: Channel 34
% (0-100) of Breaker Size - Ch 34
AV126
Percent
1
169
Critical Alarm Threshold: Channel 35
% (0-100) of Breaker Size - Ch 35
AV127
Percent
1
170
Critical Alarm Threshold: Channel 36
% (0-100) of Breaker Size - Ch 36
AV128
Percent
1
171
Critical Alarm Threshold: Channel 37
% (0-100) of Breaker Size - Ch 37
AV129
Percent
1
172
Critical Alarm Threshold: Channel 38
% (0-100) of Breaker Size - Ch 38
AV130
Percent
1
173
Critical Alarm Threshold: Channel 39
% (0-100) of Breaker Size - Ch 39
AV131
Percent
1
174
Critical Alarm Threshold: Channel 40
% (0-100) of Breaker Size - Ch 40
AV132
Percent
1
175
Critical Alarm Threshold: Channel 41
% (0-100) of Breaker Size - Ch 41
AV133
Percent
1
176
Critical Alarm Threshold: Channel 42
% (0-100) of Breaker Size - Ch 42
AV134
Percent
1
177
Warning Delay: Channel 1
Duration required to activate - Ch 1
AV135
Seconds
1
178
Warning Delay: Channel 2
Duration required to activate - Ch 2
AV136
Seconds
1
179
Warning Delay: Channel 3
Duration required to activate - Ch 3
AV137
Seconds
1
180
Warning Delay: Channel 4
Duration required to activate - Ch 4
AV138
Seconds
1
181
Warning Delay: Channel 5
Duration required to activate - Ch 5
AV139
Seconds
1
182
Warning Delay: Channel 6
Duration required to activate - Ch 6
AV140
Seconds
1
183
Warning Delay: Channel 7
Duration required to activate - Ch 7
AV141
Seconds
1
184
Warning Delay: Channel 8
Duration required to activate - Ch 8
AV142
Seconds
1
185
Warning Delay: Channel 9
Duration required to activate - Ch 9
AV143
Seconds
1
186
Warning Delay: Channel 10
Duration required to activate - Ch 10
AV144
Seconds
1
187
Warning Delay: Channel 11
Duration required to activate - Ch 11
AV145
Seconds
1
188
Warning Delay: Channel 12
Duration required to activate - Ch 12
AV146
Seconds
1
189
Warning Delay: Channel 13
Duration required to activate - Ch 13
AV147
Seconds
1
190
Warning Delay: Channel 14
Duration required to activate - Ch 14
AV148
Seconds
1
191
Warning Delay: Channel 15
Duration required to activate - Ch 15
AV149
Seconds
1
192
Warning Delay: Channel 16
Duration required to activate - Ch 16
AV150
Seconds
1
193
Warning Delay: Channel 17
Duration required to activate - Ch 17
AV151
Seconds
1
194
Warning Delay: Channel 18
Duration required to activate - Ch 18
AV152
Seconds
1
195
Warning Delay: Channel 19
Duration required to activate - Ch 19
AV153
Seconds
1
196
ZL0135-0A
Page 155 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Warning Delay: Channel 20
Description
Duration required to activate - Ch 20
“BACnet
Object”
AV154
Units
Seconds
“ COV
“Modbus
Increment” Address”
1
197
Warning Delay: Channel 21
Duration required to activate - Ch 21
AV155
Seconds
1
198
Warning Delay: Channel 22
Duration required to activate - Ch 22
AV156
Seconds
1
199
Warning Delay: Channel 23
Duration required to activate - Ch 23
AV157
Seconds
1
200
Warning Delay: Channel 24
Duration required to activate - Ch 24
AV158
Seconds
1
201
Warning Delay: Channel 25
Duration required to activate - Ch 25
AV159
Seconds
1
202
Warning Delay: Channel 26
Duration required to activate - Ch 26
AV160
Seconds
1
203
Warning Delay: Channel 27
Duration required to activate - Ch 27
AV161
Seconds
1
204
Warning Delay: Channel 28
Duration required to activate - Ch 28
AV162
Seconds
1
205
Warning Delay: Channel 29
Duration required to activate - Ch 29
AV163
Seconds
1
206
Warning Delay: Channel 30
Duration required to activate - Ch 30
AV164
Seconds
1
207
Warning Delay: Channel 31
Duration required to activate - Ch 31
AV165
Seconds
1
208
Warning Delay: Channel 32
Duration required to activate - Ch 32
AV166
Seconds
1
209
Warning Delay: Channel 33
Duration required to activate - Ch 33
AV167
Seconds
1
210
Warning Delay: Channel 34
Duration required to activate - Ch 34
AV168
Seconds
1
211
Warning Delay: Channel 35
Duration required to activate - Ch 35
AV169
Seconds
1
212
Warning Delay: Channel 36
Duration required to activate - Ch 36
AV170
Seconds
1
213
Warning Delay: Channel 37
Duration required to activate - Ch 37
AV171
Seconds
1
214
Warning Delay: Channel 38
Duration required to activate - Ch 38
AV172
Seconds
1
215
Warning Delay: Channel 39
Duration required to activate - Ch 39
AV173
Seconds
1
216
Warning Delay: Channel 40
Duration required to activate - Ch 40
AV174
Seconds
1
217
Warning Delay: Channel 41
Duration required to activate - Ch 41
AV175
Seconds
1
218
Warning Delay: Channel 42
Duration required to activate - Ch 42
AV176
Seconds
1
219
Critical Alarm Delay: Channel 1
Duration required to activate - Ch 1
AV177
Seconds
1
220
Critical Alarm Delay: Channel 2
Duration required to activate - Ch 2
AV178
Seconds
1
221
Critical Alarm Delay: Channel 3
Duration required to activate - Ch 3
AV179
Seconds
1
222
Critical Alarm Delay: Channel 4
Duration required to activate - Ch 4
AV180
Seconds
1
223
Critical Alarm Delay: Channel 5
Duration required to activate - Ch 5
AV181
Seconds
1
224
Critical Alarm Delay: Channel 6
Duration required to activate - Ch 6
AV182
Seconds
1
225
Critical Alarm Delay: Channel 7
Duration required to activate - Ch 7
AV183
Seconds
1
226
Critical Alarm Delay: Channel 8
Duration required to activate - Ch 8
AV184
Seconds
1
227
Critical Alarm Delay: Channel 9
Duration required to activate - Ch 9
AV185
Seconds
1
228
Critical Alarm Delay: Channel 10
Duration required to activate - Ch 10
AV186
Seconds
1
229
Critical Alarm Delay: Channel 11
Duration required to activate - Ch 11
AV187
Seconds
1
230
Critical Alarm Delay: Channel 12
Duration required to activate - Ch 12
AV188
Seconds
1
231
Critical Alarm Delay: Channel 13
Duration required to activate - Ch 13
AV189
Seconds
1
232
Critical Alarm Delay: Channel 14
Duration required to activate - Ch 14
AV190
Seconds
1
233
Critical Alarm Delay: Channel 15
Duration required to activate - Ch 15
AV191
Seconds
1
234
Critical Alarm Delay: Channel 16
Duration required to activate - Ch 16
AV192
Seconds
1
235
Critical Alarm Delay: Channel 17
Duration required to activate - Ch 17
AV193
Seconds
1
236
Critical Alarm Delay: Channel 18
Duration required to activate - Ch 18
AV194
Seconds
1
237
ZL0135-0A
Page 156 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Critical Alarm Delay: Channel 19
Description
Duration required to activate - Ch 19
“BACnet
Object”
AV195
Units
Seconds
“ COV
“Modbus
Increment” Address”
1
Comments
238
Critical Alarm Delay: Channel 20
Duration required to activate - Ch 20
AV196
Seconds
1
239
Critical Alarm Delay: Channel 21
Duration required to activate - Ch 21
AV197
Seconds
1
240
Critical Alarm Delay: Channel 22
Duration required to activate - Ch 22
AV198
Seconds
1
241
Critical Alarm Delay: Channel 23
Duration required to activate - Ch 23
AV199
Seconds
1
242
Critical Alarm Delay: Channel 24
Duration required to activate - Ch 24
AV200
Seconds
1
243
Critical Alarm Delay: Channel 25
Duration required to activate - Ch 25
AV201
Seconds
1
244
Critical Alarm Delay: Channel 26
Duration required to activate - Ch 26
AV202
Seconds
1
245
Critical Alarm Delay: Channel 27
Duration required to activate - Ch 27
AV203
Seconds
1
246
Critical Alarm Delay: Channel 28
Duration required to activate - Ch 28
AV204
Seconds
1
247
Critical Alarm Delay: Channel 29
Duration required to activate - Ch 29
AV205
Seconds
1
248
Critical Alarm Delay: Channel 30
Duration required to activate - Ch 30
AV206
Seconds
1
249
Critical Alarm Delay: Channel 31
Duration required to activate - Ch 31
AV207
Seconds
1
250
Critical Alarm Delay: Channel 32
Duration required to activate - Ch 32
AV208
Seconds
1
251
Critical Alarm Delay: Channel 33
Duration required to activate - Ch 33
AV209
Seconds
1
252
Critical Alarm Delay: Channel 34
Duration required to activate - Ch 34
AV210
Seconds
1
253
Critical Alarm Delay: Channel 35
Duration required to activate - Ch 35
AV211
Seconds
1
254
Critical Alarm Delay: Channel 36
Duration required to activate - Ch 36
AV212
Seconds
1
255
Critical Alarm Delay: Channel 37
Duration required to activate - Ch 37
AV213
Seconds
1
256
Critical Alarm Delay: Channel 38
Duration required to activate - Ch 38
AV214
Seconds
1
257
Critical Alarm Delay: Channel 39
Duration required to activate - Ch 39
AV215
Seconds
1
258
Critical Alarm Delay: Channel 40
Duration required to activate - Ch 40
AV216
Seconds
1
259
Critical Alarm Delay: Channel 41
Duration required to activate - Ch 41
AV217
Seconds
1
260
Critical Alarm Delay: Channel 42
Duration required to activate - Ch 42
AV218
Seconds
1
261
Analog_Output Objects
Global Breaker Size (set ALL)
Sets ALL breaker sizes to same value
AO1
Amperes
268
Global Warning Threshold (set ALL)
% (0-100) of Breaker Size
AO2
Percent
269
Global Crit Alarm Threshold (set ALL)
% (0-100) of Breaker Size
AO3
Percent
270
Global Warning Delay (set ALL)
Duration required to activate
AO4
Seconds
271
Global Critical Alarm Delay (set ALL)
Duration required to activate
AO5
Seconds
272
Binary_Output Objects
Latched Warning Alarm - Channel 1
1=Active; 0=Inactive; write 0 to clear
BV1
44:0
Latched Warning Alarm - Channel 2
1=Active; 0=Inactive; write 0 to clear
BV2
44:1
Latched Warning Alarm - Channel 3
1=Active; 0=Inactive; write 0 to clear
BV3
44:2
Latched Warning Alarm - Channel 4
1=Active; 0=Inactive; write 0 to clear
BV4
44:3
Latched Warning Alarm - Channel 5
1=Active; 0=Inactive; write 0 to clear
BV5
44:4
Latched Warning Alarm - Channel 6
1=Active; 0=Inactive; write 0 to clear
BV6
44:5
Latched Warning Alarm - Channel 7
1=Active; 0=Inactive; write 0 to clear
BV7
44:6
Latched Warning Alarm - Channel 8
1=Active; 0=Inactive; write 0 to clear
BV8
44:7
Latched Warning Alarm - Channel 9
1=Active; 0=Inactive; write 0 to clear
BV9
44:8
Latched Warning Alarm - Channel 10
1=Active; 0=Inactive; write 0 to clear
BV10
44:9
Latched Warning Alarm - Channel 11
1=Active; 0=Inactive; write 0 to clear
BV11
44:10
ZL0135-0A
Page 157 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Description
“BACnet
Object”
Units
“ COV
“Modbus
Increment” Address”
Latched Warning Alarm - Channel 12
1=Active; 0=Inactive; write 0 to clear
BV12
44:11
Latched Warning Alarm - Channel 13
1=Active; 0=Inactive; write 0 to clear
BV13
44:12
Latched Warning Alarm - Channel 14
1=Active; 0=Inactive; write 0 to clear
BV14
44:13
Latched Warning Alarm - Channel 15
1=Active; 0=Inactive; write 0 to clear
BV15
44:14
Latched Warning Alarm - Channel 16
1=Active; 0=Inactive; write 0 to clear
BV16
44:15
Latched Warning Alarm - Channel 17
1=Active; 0=Inactive; write 0 to clear
BV17
45:0
Latched Warning Alarm - Channel 18
1=Active; 0=Inactive; write 0 to clear
BV18
45:1
Latched Warning Alarm - Channel 19
1=Active; 0=Inactive; write 0 to clear
BV19
45:2
Latched Warning Alarm - Channel 20
1=Active; 0=Inactive; write 0 to clear
BV20
45:3
Latched Warning Alarm - Channel 21
1=Active; 0=Inactive; write 0 to clear
BV21
45:4
Latched Warning Alarm - Channel 22
1=Active; 0=Inactive; write 0 to clear
BV22
45:5
Latched Warning Alarm - Channel 23
1=Active; 0=Inactive; write 0 to clear
BV23
45:6
Latched Warning Alarm - Channel 24
1=Active; 0=Inactive; write 0 to clear
BV24
45:7
Latched Warning Alarm - Channel 25
1=Active; 0=Inactive; write 0 to clear
BV25
45:8
Latched Warning Alarm - Channel 26
1=Active; 0=Inactive; write 0 to clear
BV26
45:9
Latched Warning Alarm - Channel 27
1=Active; 0=Inactive; write 0 to clear
BV27
45:10
Latched Warning Alarm - Channel 28
1=Active; 0=Inactive; write 0 to clear
BV28
45:11
Latched Warning Alarm - Channel 29
1=Active; 0=Inactive; write 0 to clear
BV29
45:12
Latched Warning Alarm - Channel 30
1=Active; 0=Inactive; write 0 to clear
BV30
45:13
Latched Warning Alarm - Channel 31
1=Active; 0=Inactive; write 0 to clear
BV31
45:14
Latched Warning Alarm - Channel 32
1=Active; 0=Inactive; write 0 to clear
BV32
45:15
Latched Warning Alarm - Channel 33
1=Active; 0=Inactive; write 0 to clear
BV33
46:0
Latched Warning Alarm - Channel 34
1=Active; 0=Inactive; write 0 to clear
BV34
46:1
Latched Warning Alarm - Channel 35
1=Active; 0=Inactive; write 0 to clear
BV35
46:2
Latched Warning Alarm - Channel 36
1=Active; 0=Inactive; write 0 to clear
BV36
46:3
Latched Warning Alarm - Channel 37
1=Active; 0=Inactive; write 0 to clear
BV37
46:4
Latched Warning Alarm - Channel 38
1=Active; 0=Inactive; write 0 to clear
BV38
46:5
Latched Warning Alarm - Channel 39
1=Active; 0=Inactive; write 0 to clear
BV39
46:6
Latched Warning Alarm - Channel 40
1=Active; 0=Inactive; write 0 to clear
BV40
46:7
Latched Warning Alarm - Channel 41
1=Active; 0=Inactive; write 0 to clear
BV41
46:8
Latched Warning Alarm - Channel 42
1=Active; 0=Inactive; write 0 to clear
BV42
46:9
Latched Critical Alarm - Channel 1
1=Active; 0=Inactive; write 0 to clear
BV43
47:0
Latched Critical Alarm - Channel 2
1=Active; 0=Inactive; write 0 to clear
BV44
47:1
Latched Critical Alarm - Channel 3
1=Active; 0=Inactive; write 0 to clear
BV45
47:2
Latched Critical Alarm - Channel 4
1=Active; 0=Inactive; write 0 to clear
BV46
47:3
Latched Critical Alarm - Channel 5
1=Active; 0=Inactive; write 0 to clear
BV47
47:4
Latched Critical Alarm - Channel 6
1=Active; 0=Inactive; write 0 to clear
BV48
47:5
Latched Critical Alarm - Channel 7
1=Active; 0=Inactive; write 0 to clear
BV49
47:6
Latched Critical Alarm - Channel 8
1=Active; 0=Inactive; write 0 to clear
BV50
47:7
Latched Critical Alarm - Channel 9
1=Active; 0=Inactive; write 0 to clear
BV51
47:8
Latched Critical Alarm - Channel 10
1=Active; 0=Inactive; write 0 to clear
BV52
47:9
ZL0135-0A
Page 158 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 1: Data Objects for Supported Metering Devices (cont.)
H704/H663 Branch Current Monitors, cont.
Data Variable
Description
“BACnet
Object”
Units
“ COV
“Modbus
Increment” Address”
Latched Critical Alarm - Channel 11
1=Active; 0=Inactive; write 0 to clear
BV53
47:10
Latched Critical Alarm - Channel 12
1=Active; 0=Inactive; write 0 to clear
BV54
47:11
Latched Critical Alarm - Channel 13
1=Active; 0=Inactive; write 0 to clear
BV55
47:12
Latched Critical Alarm - Channel 14
1=Active; 0=Inactive; write 0 to clear
BV56
47:13
Latched Critical Alarm - Channel 15
1=Active; 0=Inactive; write 0 to clear
BV57
47:14
Latched Critical Alarm - Channel 16
1=Active; 0=Inactive; write 0 to clear
BV58
47:15
Latched Critical Alarm - Channel 17
1=Active; 0=Inactive; write 0 to clear
BV59
48:0
Latched Critical Alarm - Channel 18
1=Active; 0=Inactive; write 0 to clear
BV60
48:1
Latched Critical Alarm - Channel 19
1=Active; 0=Inactive; write 0 to clear
BV61
48:2
Latched Critical Alarm - Channel 20
1=Active; 0=Inactive; write 0 to clear
BV62
48:3
Latched Critical Alarm - Channel 21
1=Active; 0=Inactive; write 0 to clear
BV63
48:4
Latched Critical Alarm - Channel 22
1=Active; 0=Inactive; write 0 to clear
BV64
48:5
Latched Critical Alarm - Channel 23
1=Active; 0=Inactive; write 0 to clear
BV65
48:6
Latched Critical Alarm - Channel 24
1=Active; 0=Inactive; write 0 to clear
BV66
48:7
Latched Critical Alarm - Channel 25
1=Active; 0=Inactive; write 0 to clear
BV67
48:8
Latched Critical Alarm - Channel 26
1=Active; 0=Inactive; write 0 to clear
BV68
48:9
Latched Critical Alarm - Channel 27
1=Active; 0=Inactive; write 0 to clear
BV69
48:10
Latched Critical Alarm - Channel 28
1=Active; 0=Inactive; write 0 to clear
BV70
48:11
Latched Critical Alarm - Channel 29
1=Active; 0=Inactive; write 0 to clear
BV71
48:12
Latched Critical Alarm - Channel 30
1=Active; 0=Inactive; write 0 to clear
BV72
48:13
Latched Critical Alarm - Channel 31
1=Active; 0=Inactive; write 0 to clear
BV73
48:14
Latched Critical Alarm - Channel 32
1=Active; 0=Inactive; write 0 to clear
BV74
48:15
Latched Critical Alarm - Channel 33
1=Active; 0=Inactive; write 0 to clear
BV75
49:0
Latched Critical Alarm - Channel 34
1=Active; 0=Inactive; write 0 to clear
BV76
49:1
Latched Critical Alarm - Channel 35
1=Active; 0=Inactive; write 0 to clear
BV77
49:2
Latched Critical Alarm - Channel 36
1=Active; 0=Inactive; write 0 to clear
BV78
49:3
Latched Critical Alarm - Channel 37
1=Active; 0=Inactive; write 0 to clear
BV79
49:4
Latched Critical Alarm - Channel 38
1=Active; 0=Inactive; write 0 to clear
BV80
49:5
Latched Critical Alarm - Channel 39
1=Active; 0=Inactive; write 0 to clear
BV81
49:6
Latched Critical Alarm - Channel 40
1=Active; 0=Inactive; write 0 to clear
BV82
49:7
Latched Critical Alarm - Channel 41
1=Active; 0=Inactive; write 0 to clear
BV83
49:8
Latched Critical Alarm - Channel 42
1=Active; 0=Inactive; write 0 to clear
BV84
49:9
ZL0135-0A
Page 159 of 162
Comments
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
Appendix 2: DIP
Switch Address
Settings
Switch A7 is used to select the BACnet physical interface. It appears shaded here to indicate it is not part of the MAC address.
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
0
1
2
3
4
5
6
7
8
9
10
11
12
13
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
14
15
16
17
18
19
20
21
22
23
25
24
26
27
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
28
29
30
31
32
33
34
35
36
37
38
39
40
41
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
42
43
44
45
46
47
48
49
50
51
52
53
54
55
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
56
ZL0135-0A
57
58
Page 160 of 162
59
60
61
62
63
64
65
66
67
68
69
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
TM
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
70
71
72
73
75
74
76
77
78
79
80
81
82
83
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
84
85
86
87
88
89
90
91
92
93
94
95
96
97
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
98
100
99
101
102
103
105
104
106
107
108
111
110
109
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A0
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A1
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A2
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A3
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A4
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A5
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A6
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
112
ZL0135-0A
113
114
115
Page 161 of 162
116
117
118
119
120
123
124
125
126
127
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
E8951 Installation Guide
Appendix 3: Quick
Guide to Calculate the
Number of Meters
Supported
TM
The E8951 can support up to 32 meters (maximum) and up to 10,000 total BACnet points.
The installer can mix meter types, but only from the list of supported meters.
Set all meters to a common baud rate. The combined number of points (see table below) must not exceed 10,000.
Modbus
Addresses per
Meter
Meter Type
Maximum
Number
of Meters
Supported
Total Number
of Points per
Meter
BACnet Points
per Address
E3xA ≤ 42 channels (Firmware ≥ V1.023)
1
1792
1792
6
E3xA ≤ 42 channels (Firmware = V1.016 to V1.023)
1
782
782
14
E3xA ≤ 42 channels (Firmware ≤ V1.016)
1
736
736
14
E3xB ≤ 42 channels
1
442
442
24
E3xC ≤ 42 channels
1
446
446
24
E3xA 43-84 channels (Firmware ≥ V1.023)
2
1792
3584
3*
E3xA 43-84 channels (Firmware = V1.016 to V1.023)
2
782
1564
7*
E3xA 43-84 channels (Firmware ≤ V1.016)
2
736
1472
7*
E3xB 43-84 channels
2
442
884
12*
E3xC 43-84 channels
2
446
892
12*
E50C2
1
63
63
32**
E50C3
1
63
63
32**
E51C2
1
94
94
32**
E51C3
1
94
94
32**
H8035
1
3
3
32**
H8036
1
28
28
32**
H8163-CB
1
54
54
32**
H8238
8
91
728
15
H8436
1
34
34
32**
H8437
1
66
66
32**
H704/H663
1
356
356
30
A8911-23
1
42
42
32**
A8332-8F2D
1
65
65
32**
* The E31A42 can be configured with help from Veris Customer Support.
** 32 meters maximum.
ZL0135-0A
Page 162 of 162
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected]
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement