2x2 DVI Switcher

U S E R M A N U A L

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone (818)

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday.

Write To:

Gefen Inc.

C/O Customer Service

20600 Nordhoff St

Chatsworth, CA 91311 www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice.

The 2x2 DVI Switcher is a trademark of Gefen Inc.

© 2007 Gefen Inc., All Rights Reserved

TABLE OF CONTENTS

5

6

3

4

1

2

Introduction

Front Panel Descriptions

Back Panel Descriptions

How To Connect The 2x2 DVI Switcher

System Specifi cations

Warranty

INTRODUCTION

Thank you for purchasing Gefen’ s 2x2 DVI Switcher series. The 2x2 DVI Switcher switches

DVI, USB 2.0 and Audio between any combination of two computers.

Now you can switch easily and reliably between any combination of two computers using two DVI displays, USB keyboard and mouse.

The 2x2 DVI Switcher saves space – there’s no need to work on a desk crowded with four monitors, keyboards and mouse devices. It saves time – there’s no need to move from one monitor to another to access different computers. And it saves money – there’s no need to purchase additional monitors, mouse devices, keyboards etc.

The 2x2 DVI Switcher allows you to choose between any combination of Macintosh or PC computers and switching two monitors side by side.

CONTENTS

The 2x2 DVI Switcher system consists of:

(1) 2x2 DVI Switcher

(1) 5V DC power supply

(4) DVI to DVI cables (6FT)

(2) USB cables (6FT)

(2) Audio cables (6FT)

(1) User Manual

1

FRONT PANEL DESCRIPTIONS

2

BACK PANEL DESCRIPTIONS

3

HOW TO CONNECT THE 2x2 DVI SWITCHER

1- Connect the cables from your fi rst computer into the DVI 1.1, DVI 1.2, USB and

Audio connection in the back of the 2x2 DVI Switcher.

2- Connect the cable from your second computer into the DVI 2.1, DVI 2.2, USB and

Audio connection in the back of the 2x2 DVI Switcher.

3- Connect the monitors to the DVI Out (1 and 2) connections.

4- Plug the 5v power supply into the 2x2 DVI Switcher.

5- Plug the 5v wallmount power supply into the wall outlet.

6- Start your computers only after you’ve made all the connections.

7- Press select, to switch between Computer 1 or Computer 2 or switch remotely using

the optional contact closure remote control.

4

SPECIFICATIONS

Video Amplifi er Bandwidth ................................................................................. 1.65 GHz

Input Video Signal ......................................................................................... 1.2 volts p-p

Input Sync Signal ................................................................................... 5 volts p-p (TTL)

Single Link Range ......................................................................................... 1920 x 1200

Vertical Frequency Range ....................................................................................... 60 Hz

DVI Input/Output Connector Type ............................................................................. DVI-I

USB Version ........................................................................................................ USB 2.0

USB Input Connector .......................................................................................... Type “B”

USB Output Connector ........................................................................................ Type “A”

Power Consumption ................................................................................ 18 Watts (max.)

Power Supply ......................................................................................................... 5V DC

Dimensions ...................................................................................... 16”W x 1.75”H x 4”D

Rackmountable ........................................................................................... 1 Rack Space

Shipping Weight ..................................................................................................... 12 Lbs

5

WARRANTY

Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship.

If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations.

Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for ninety (90) days from the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fi tness for any particular purpose, all of which are expressly disclaimed.

1. Proof of sale may be required in order to claim warranty.

2. Customers outside the US are responsible for shipping charges to and from Gefen.

3. Copper cables are limited to a 30 day warranty and cable must be free from any

scratches, markings, and neatly coiled.

The information in this manual has been carefully checked and is believed to be accurate.

However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information contained herein regarding the 2x2 DVI Switcher features and specifi cations is subject to change without notice.

6