gtc090501 rev-9-2015

gtc090501 rev-9-2015
ADVANCE SmartSeries™
A Hubbell Company
Portal Graphical User Interface
• Graphical Representation of Entire
ADVANCE / SmartSeries™ system
• Real-time Notification of System Status
and Faults
• Clear, User-Friendly Format
• Supports 1 to 20 Remote View Nodes
ADVANCE/SmartSeries systems typically display system fault and status messages on an
Access Panel, or save them into a log file. Now
those who prefer a more flexible PC-based
environment can use GAI-Tronics’ Portal
Graphical User Interface (GUI) software.
System View - Healthy and no status messages
GAI-Tronics’ Portal viewer, together with the
included Server system interrogation software provides real-time information about
the ADVANCE system in a user-friendly graphical format. Faults and system status information are clearly displayed, simplifying system
troubleshooting and allowing easy identification of system events such as pages or alarm
Part numbers
12509-x00 – Portal/Server – 1 user
12509-x01 – Portal/Server – 5 users
12509-x02 – Portal/Server – 10 users
12509-x03 – Portal/Server – 20 users
SmartSeries RTU Station View:
Healthy with paging and active input/output
Minimum System Requirements a
dedicated PC with the following:
• Intel® Pentium® 4 2GHz or faster
processor (or equivalent)
• Windows XP
• 512MB of RAM
• 20MB free hard drive space
Monitored Relay Module View:
Fault shown on monitored input 1
GAI-TRONICS® A Hubbell Company
Toll Free: 1-800-492-1212
Tel: 610-777-1374
FAX: 610-796-5954
Pub. 090501 Rev. 9/2015
Quality Management System Certified by DNV-GL - ISO 9001:2008.
The policy of GAI-Tronics is one of continuous improvement; therefore the company reserves the right to change specifications without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF