lg ericsson user guide 8012

lg ericsson user guide 8012
LG Ericsson LIP-8012, 8024D IP Telephone
User Guide
Ring or Message
Indicator
Handset
LCD Display
NAV Keys
3 Soft
Message
Select Key
Speaker
Flexible
Keys
Trans/Pgm
Menu
DND
Hold/Save
Headset
Mute
Volume up
Speaker Button
Volume down
Hands-free microphone
Fixed Feature button definition
Button
Description
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active,
the red LED in this button is illuminated.
When using a headset, this button toggles the headset state. When Headset is active, the
red LED in this button is illuminated.
The volume button adjusts the audio levels for ringing, handset, headset and
speakerphone functions. It is also used to adjust LCD brightness in idle state.
This button is used to initiate a call transfer (Trans) or to enter programming mode (PGM)
This button is used to put a call on hold or save information when programming.
This button is used to toggle audio send on or off. When Mute function is active,
the red LED in this button is illuminated.
Speaker toggles the speakerphone state, and the red LED is illuminated when the
speakerphone is active.
The menu button is used to move to the desired option (Dial, MSG, Program),
and to select the next screen when indicated by an arrow on the LCD display.
When the Message Waiting Indicator illuminates, you have a message waiting.
Use this button to access Voice Mail server.
3 Soft
buttons
Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
Flexible
Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
Ring or MSG
indicator
Illuminates when the phone is ringing. It is also used to message wait indicator.
LCD Display
Displays information about telephone status, dialing directories, and test message
information.
Hands-free
Microphone
Microphone is used for hands-free speakerphone function.
LIP-8012D/8024D/8040L User Operation
Receiving calls _ Answering a Call While Idle :
1. Lift the handset and press the flashing Flex button
(as needed), the call will be connected.
Responding to a Call While Busy
1. Press Hold/save and/or
2. Press the flashing CO line button.
Answering Calls to Other Stations
To answer a call ringing at another station:
1. Lift the handset,
2. Dial *42 (Directed Call Pick-Up code),
3. Dial the Intercom Number of the ringing station; the
call will be connected.
To answer a call ringing at a station in your
group:
1. Lift the handset,
2. Dial *1 (Group Call Pick-Up code), the call is
connected.
Using Do-Not-Disturb (DND) to Block Incoming
Calls
To toggle DND ON and OFF:
1. Press the DND button.
Forwarding calls to another Station or Voice
Mail
To activate Call Forward from your phone to
another phone or internal system resource:
1. Lift the handset (or press Speaker)
2. Press the Fwd Soft button,
3. Dial the type of forward code 1-5
4. Dial the destination Station or code.
5. For Voicemail dial Fwd 4 633
Placing Intercom calls
To place an Intercom call:
1. Dial the Intercom number of the desired station,
2. On answer or Splash tone, lift the handset or speak
to the called party hands-free.
Using System or Station Speed Dial Numbers
To place a call using Speed Dial:
1. Press the DIR Soft button,
2. Press the Speed Soft button,
3.
Dial the System/Station Speed Dial bin number
To place a call using Dial-by-Name:
1. Press the DIR Soft button,
2. Choose Private (Station) or Public (System list) by
scrolling with NAV key, press Select Key
3. Dial 2 digits for letter of first name (eg 22 for ‘B’)
4. Press Name/Tel Soft button to view the number or:
5. Press Send Soft button to place a the call.
Entering Station Speed Dial Numbers
To enter a Station Speed Dial number with CO
Line and Name:
1.
2.
3.
4.
5.
6.
7.
Press the DIR Soft button,
Press the ADD Soft button,
Dial the desired Station Speed Dial bin number,
Select/dial the CO line/group,
Dial the desired number to be stored,
Press hold/Save,
Enter the associated name if desired, using the
alpha-numeric entry chart,
8. Press hold/Save.
To assign a Station Speed Dial number directly
to a Flex button:
1.
2.
3.
4.
5.
6.
7.
Press Trans/pgm,
Press the desired Flex button,
Select the Tel Num Soft button,
Select/dial the CO line/group,
Dial the desired number,
Press hold/Save,
Enter the associated name if desired, using the
Character Entry chart,
8. Press hold/Save.
ACNR: To retry a busy external number until
answered
To set up an ACNR, while on an outgoing call:
1. Press * and wait an answer.
1. Use the Navigation button to display the next menu
and select the ACNR Soft button,
2. Hang-up handset.
Using Last Number Redial (LNR)
To dial the Last Number for an external call:
To cancel the ACNR request:
1. Press the STOP Soft button.
1.
2.
3.
4.
Call Transfer: Sending a call to a different
destination
To Transfer an active call:
Using Camp-On when calling a busy station
To Camp-On (wait off-hook) for a busy station:
Press the DIR Soft button,
Press the SPEED Soft button,
Press *.
Press Volume up/down to select from the last 10
numbers dialed,
5. Press the Send Soft button or hold/save.
1. Press Trans/pgm,
2. Call receiving party,
3. Hang-up with or without announcement.
LIP-8012D/8024D/8040L User Operation
Call Hold: Placing a call in a waiting state
To place a call on Hold:
Dual font : Two kinds of English font can be
1. Press Hold/save.
To change the font
Joining Multiple People in a Conference
To establish a Conference:
1. Press MENU button
2. Press ‘1’ ‘8’.
3. Press Navigation UP/DOWN button to select.
4. Press [OK] Soft button.
1. Establish call with one of the desired conference
parties,
2. Select the Conf Soft button,
3. Establish call with the other conference party,
4. Select the Conf Soft button,
5. Select the Conf Soft button again to establish the
conference.
To place a Conference on Hold:
1. Press the hold/save button.
used ; Times New Roman, Gothic.
Blue-tooth : blue-tooth headset can be used.
(LIP-8024D and LIP-8040L only)
Optional blue-tooth module has to be mounted.
To enable or disable to use blue-tooth headset
1. Press [PGM] + ‘*’ + ‘9’.
2. Select ON or OFF by dialing 1 or 0.
3. To save the item, press [SAVE] button.
To retrieve the Conference:
1. Select the Conf Soft button.
To make an External-parties-only Conference:
1. Establish conference with two external parties,
2. Select the Conf Soft button to exit.
To enter pre-opened Conference Room:
1. Dial 5 9 X (when X is the conference room number.)
Call log: To review call history of incoming,
outgoing and missed calls. The user can
place a call with the numbers and save
the external call to directory
To enter the CALL LOG menu
To register blue-tooth headset
1. Make blue-tooth headset to register mode.
2. Press [PGM] + ‘*‘ + ‘8’.
3. After searching headset, press [OK].
4. Enter pin code and press [OK].
5. After success pairing, press [EXIT].
To check paired information
1. Press [PGM] + ‘*’ + ‘8’.
2. Select paired information menu by navigation button
and press [OK].
3. Check the information and press [EXIT].
To remove headset paired information
To place call with numbers in CALL LOG menu
1. Press [PGM] + ‘*’ + ‘9’.
2. Select un-pairing menu by navigation button and
press [OK].
3. To delete paired, press [OK] button to make sure.
1. Press Navigation UP/DOWN button to select.
2. Press the SEND Soft button.
To retrieve voicemail
To save the external call to directory
1.Press VSF Key programed listen to voice prompts
Or dial 633 + extn + password.
1. Press the LOG Soft button.
1. Press Navigation UP/DOWN button to select.
2. Press the SELECT Soft button.
3. Press the SAVE Soft button.
Contrast : LCD contrast can be adjusted.
To change the contrast
1. In the idle state, press VOLUME UP or
VOLUME DOWN button.
If VOLUME UP button is pressed, the contrast is
increased (dark).
If VOLUME DOWN button is pressed, the contrast is
decreased (bright).
For Further enquiries please contact:
[email protected]
LIP-8012D/8024D/8040L User & Menu Program Codes
[User Program Codes]
• Press the [TRANS/PGM] button ▶ Press the flexible button to be programmed
• ▶ Press [TRANS/PGM] button again ▶ Enter the desired feature code below table
• ▶ Press the [HOLD/SAVE] button to save.
Code
10
11
12
13
14
15
19
21
22
23
24
25
30
31
32
33
34
35
36
37
38
39
41
42
51
52
53
54
55
Function
Enblock mode
ICM Ring
CO Ring
Answer Mode
Call Coverage
Station Ring Download
Ear-Mic Headset
COS Down
COS Restore
Walking COS
ICR Scenario
LIP Keyset Statics
VM Mobile Notify
Message Retrieve Methos
Message Retrieve Example
Auth. Code Register
DID Call Wait
Choice Exec/Sec Msg
Send SMS Msg
Register Mobile Extension
Mobile Ext Activation
Register Mobile Ext CLI
Set Wake-up Time
Wake-Up Erase
Set Pre-Selected MSG
PGM Customer MSG
Conf-Room Activate
Conf-Room Deactivate
Monitor Conf-Group
Code
61
62
71
72
73
74
75
76
77
78
79
80
84
85
88
86
89
91
94
95
96
97
98
99
*0
**
*#
*7
*8
*9
Function
Speakerphone / Headset
Headset Ring Mode
LCD Display Language
Display MFIM Version
Background Music
Register Station Name
Display Phone IP Address
Change Phone IP Address
Display Phone MAC IP Address
Change Mode
Display Phone Version
Two Way Record
Account Code
LOOP Button
Camp-on
INTURSION
KEY PAD FACILITY
CONF Button
FLASH Button
MUTE Button
MON Button
REDIAL Button
FWD Button
PTT Button
HOTDESK Agent Login
HOTDESK Agent Logout
Enter ADMIN
Forced Fwd to Destination
Register Bluetooth
Bluetooth Usage
[Menu Program Codes]
• Press the [Menu] button ▶ Press the flexible button to be programmed
• ▶ Press number to enter each menu ▶ Select menu to set
• ▶ Press the [HOLD/SAVE] button to save.
Code
Function
Code
Function
11
Station Name Program
18
Font Program
12
ICM RING
21
Create Conference Room
13
CO Ring
22
delete Conference Room
14
Password Program
31
Send Message
15
Language Program
32
In Box
16
STA Ring Download
4
Networking Config
17
Back Light
0
Attendant
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement