Installation Instruction - Manual Control Option: Smart & IB Modules

Installation Instruction - Manual Control Option: Smart & IB Modules
Installation Instruction
DOC.ISLMC.Q Rev. A
September, 2006
Pneumatic Manual Override options
WARNING
1
FieldQ pneumatic actuators must be isolated
both pneumatically and electrically before
(dis)assembly.
2
3
For commissioning, emergency or maintenance
purposes, the FieldQ can be supplied with Pneumatic
Manual Override options. These options can operate
the actuator when there is air pressure available, but
no control signal or power supply. Two versions are
available:
1 “Push” version.
2 “Push & Lock” version.
1
Fig. 1 Pneumatic Manual Override mounting
“Push”
“Push & “Lock
1
1
1
0
0
2 (90˚)
1
1 Remove plug (3) from the Pneumatic Manual Override port on the Control module (use a 6mm Allen
key). Take care that no dirt or moisture enters in
this port.
2 Turn in and tighten the Pneumatic Manual Override
(2), using a 19mm wrench. Take care that the
flange under the hexagon meets the housing surface. Do not use excessive force.
3 Replace the nut cap (1).
2
1 = “locked”
0 = “unlocked”
Fig. 2 Pneumatic Manual Override operation
Mounting instructions.
Operating instructions.
1 “Push” version. Pressing the spring return button
will operate the actuator. Releasing the button will
bring back the actuator in its original position.
2 “Push & Lock” version. To operate this optional
local manual control, use a screw driver. Push and
turn it 90°, to lock it in position and keep the actuator in its operated state.
It is possible to rotate the screw multiple cycles.
The unit will toggle every 90° between “locked” (1)
and “unlocked” (0).
TM
www.FieldQ .com
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can
be obtained from our website www.Fieldq.com or from your nearest Valve Automation Center: America's: +1 813 630 2255
(fax +1 630 9449) Europe: +31 74 256 10 10 (fax +31 74 291 09 38) Asia/Pacific: +65 626 24 515 (fax +65 626 80 028)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement