AL 1127PR

AL 1127PR
DC112700-03
May 2001
1127/ 1127P
Desktop Visual Alerter
Installation Guide
Algo Communication Products Ltd.
1127 User Guide
Table of Contents
Description
3
Application 1: Wiring “Plug & Play” (dry contact)
4
Application 2: Connection to Algo 1825P Ringer
5
Application 3: Remote Wiring to Algo 4100 AuxBox
6
Flash options
7
Order Accessories
8
!
Please read the following warning carefully
Note: A safety lock out switch in the unit is provided to prevent
operation without the diffusing lens. Looking into the LED’s without the lens may be damaging to your eyesight! In order for the
1127 to function the cover must be firmly closed by screwing the lens
clockwise. Do not over-tighten.
Algo Communication Products Ltd. 4500 Beedie Street, Burnaby, B.C. Canada V5J 5L2
Customer support: Toll Free (877) 884-2546 (ALGO) or support@algosolutions.com
1127 User Guide
Description
The 1127 Desktop Visual Alerter requires a 24Vdc power
supply (included with the 1127P) and is activated by dry contact closure or audio detection.
These inputs may be provided by the “plug & play” connectors
or hard wired internally. For hard wiring, the cover must be
removed by unscrewing (counter-clockwise) the diffusing lens
and removing the cover.
The 1127 may be wall mounted with the supplied screws while
the cover is removed, or fastened using the supplied hook and
loop self-adhesive tape. Many cubicle walls will support hook
fasteners.
The 24Vdc input is polarity insensitive and requires 80mA.
The Relay input detects either dry contact closure (relay
contacts) or audio signal according to the shunt setting as in
Figure 1.0. Required audio input level is 3.3Vrms as supplied
by Algo’s 1825P Duet Plus output level at mid-volume setting.
Power Input
Relay Input
Detect Dry Contact Closure
Detect Audio Input
Figure 1.0
Algo Communication Products Ltd.
1127 User Guide
Application 1
Wiring “Plug & Play”( dry contact )
Connect the Algo 3242 power supply (supplied with 1127P)
into the power jack of the 1127. Connect the supplied 2.5mm
cord into the 2.5mm jack of the 1127 and the other end into
the RELAY jack of the activating equipment (such as Algo’s
4100 AuxBox).
Set the 1127 to the desired flash (see Figure 5.0)
Figure 2.0 Desktop Connection to Algo 4100 AuxBox
1127 User Guide
Application 2: Connection to Algo 1825P Ringer
The 1127 can activate from any audio signal, such as warble
from a ringing Duet Plus. To connect to the output of the Algo
1825P Duet Plus, set the shunt for audio detect, located inside the 1127 and wire to RELAY terminals on the 1127 and to
the AUX SPKR terminals inside the 1825P Duet Plus.
The Duet Plus power supply (Algo 1223) is compatible with
the 1127 and can power both products.
Set the 1127 to the desired flash (see Figure 5.0)
Input
Figure 3.0 Audio detection from Algo 1825P Duet Plus
Algo Communication Products Ltd.
1127 User Guide
Application 3: Remote Wiring to Algo 4100 AuxBox
The supplied Algo 3242 power supply can be located remotely
with the connector cut off and spliced to telephone station
wire.
If connecting to a remote dry contact accessed through a
2.5mm jack, cut the supplied 2.5mm plug to plug cord in half
and splice the station wire to the black + white conductor.
Using station wire, connect to the 24Vdc and Relay terminal in
side the unit, accessible with cover removed.
The 24Vdc input is polarity insensitive and requires 80mA.
The RELAY INPUT detects either dry contact closure (relay
contacts) or audio signal according to the shunt setting as in
Figure 1.0.
Set the 1127 to the desired flash (see figure 5.0)
Figure 4.0 Remote Wiring to Algo 4100 AuxBox
1127 User Guide
Flash Options
Four flash options are provided.
These options can be selected by changing the switch settings located on the rear edge on the unit.
1 2
Pulsating
UP
DN
Dancing Lights
(default)
Steady
1 2
UP
DN
1 2
1 2
UP
DN
UP
DN
Flash
Figure 5.0 Switch Settings
Ordering Accessories
1185 Horn Speaker
8 Ohm 20Watt horn speaker Water-proof white plastic.
1126P Strobe Light e/w Power Supply
Provides a visual flash indication when connected to
the Relay1 or Relay2 of Auxbox.
e/w with Power supply
1826P Talking Duet Plus e/w Power Supply
Talking Duet Plus is an auxiliary ringer for applications requiring a unique recorded message. Upto 16 seconds of
audio signal can be recorded into the device for playback
as an alerter. The Talking Duet Plus also includes an amplifier for direct or delayed paging applications.
Algo Communication Products Ltd.
1127 User Guide
Ordering Accessories cont.
4100 AuxBox
Monitors the digital signaling between a Norstar or M1
system and a Meridian telephone. It can be located in
the equipment room or at desktop to provide dry
contact output on ring, hook status(handset, headset,
or handsfree), message waiting, and page. The 1127P
easily connects to the 4100 AuxBox.
1825P
Duet Plus e/w Power Supply
Duet Plus is an auxiliary ringer compatible with most
business telephone equipment and includes an audio
amplifier for ring amplification or voice paging.
ALGO
is ISO 9001 registered
The
The Products and Services of Algo Communication Products will consistently meet or exceed customer expectations for reliability, performance and value; be delivered
in accordance with commitments made; and be improved
at every opportunity
Visit our Website at
www.algosolutions.com
Customer Support:
Toll Free (877) 884-2546
or support@algosolutions.com
Nortel Networks, Nortel, Meridian 1 , Northern Telecom and the Globemark logo are trademarks of Nortel Networks Corporation.
Duet Plus, AuxBox logo and Algo logo are trademarks of Algo Communication Products Ltd.
1127 User Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising