G8000MM Series Brochure

G8000MM Series Brochure
Uninterruptible Power Systems
Year
Warranty
G8000MM Series
100 to 750 KVA UPS
Extended
IGBT
Extended
DESIGN
94%
Efficiency
Extended
Warranty
Available
Extended
Available
Extended
Warranty
Available
G8000MM Main Features
State-of-the-Art Modular Design Provides Maximum Flexibility
The Toshiba G8000MM uninterruptible power system
utilizes state-of-the-art design and construction to
deliver industry-leading reliability and the flexibility to
meet today’s critical power demands.
• Technologically Advanced Control of Fast-Switching IGBTs Delivers
94% Efficiency
• Combination Diode Bridge & Broad Range Harmonic Input Filter
Delivers Low Input Total Harmonic Distortion (THD)
• Low THD Reduces Heat Loss in Associated Feed Equipment &
Increases Component Life
• Self-Contained Modular Design Allows Low Cost Future Expansion
• Combine Up to Eight Modules for Increased Capacity or
Redundancy
• Highly Efficient Hybrid Static-Transfer Switch Built Into Each Module
• Parallel Output Tie Cabinet Requires Minimal Intelligence Circuitry
Reducing Purchase Cost
• Superior Output Voltage Regulation Provides Non-Distorted Output
Power with Minimal Use of Batteries when Subjected to Severe
150 KVA G8000MM
Step Loads
• Generator-Friendly Interface Allows 1.1 KW Generator Capacity to 1.0 KVA UPS Load
• Advanced Battery-Control Ingenuity Produces Low DC Ripple -- Extending Battery & Capacitor Life
• Fail-Safe Design Incorporates Robust, Conservatively Engineered Devices to Reduce Failures & Ensure
Reliability
High Efficiency Design
EFFICIENCY
• G8000MM Efficiency Greater than 90% at Loads 25% & Larger
• Higher Efficiency Means Lower Power Losses Equating to Lower
Utility Cost
• Lower Air-Conditioning Requirements
• Reduced Total Cost of Operation & Ownership
• High Efficiency Provides Rapid Return of Investment
100%
G8000MM UPS with
Advanced IGBTs
90%
Typical UPS Without
Advanced IGBTs
80%
0%
25%
0%
Hybrid Static Transfer Switch
• Each UPS Module Equipped with Hybrid Static-Transfer Bypass
Switch
• Make-Before-Break Switch Design Ensures a Seamless Transfer
of Power to Critical Load
• Hybrid SCR/Contactor Design Improves Static-Switch Efficiency
to Nearly 100%
• Lowers Utility Cost & Overall Cost of Operation
50%
75%
% of FULL LOAD
Contactor
Static Transfer Switch
Contactor
100%
G8000MM System
Configurations
AC Bypass
Input
G8000MM UPS Module
Optional Jumper for
Single-Source Input
AC-DC Rectifier
Contactor
Static Transfer Switch
Contactor
DC-AC Inverter
Filter
AC
Input
DC-DC
Converter
AC
Output
Contactor
Isolation
Transformer
Battery
Cabinet
Parallel Multi-Module
• Parallel up to Eight Units
• Load Capacity from 100 to 4000 KVA
• Control Circuitry Built Into Each UPS for
Redundancy
• Distributed Bypass Eliminates Single Point of
Bypass Failure
• Redundant Switches Reduce Single Point of Failure in One Static Switch Cabinet Design
• Controlled through Each Local UPS LCD Panel
or through Customer-Supplied Interface
• Monitor Status through UPS, Tie Cabinet, or
Across Local Area Network
• Line Reactors in Tie Cabinet Ensure Balanced
Load Distribution in Bypass Mode
• Tie Cabinet Requires No Sophisticated
Control Circuitry for Ease of Future Expansion
AC Input
Source
AC Bypass
AC Input
G8000MM UPS
Module #2
AC
Output
Battery Cabinet
AC Bypass
AC Input
Single Module
Contactor
G8000MM UPS
Module #1
Battery Cabinet
AC
Output
• Built-In Hybrid Internal Static Bypass Circuit
• Output Isolation
• DC-to-DC Isolation
• Single or Dual-Source Input
• Monitor UPS Locally or Remotely
• Controllable via Local LCD Panel or CustomerSupplied Interface
G8000MM UPS
Tie Cabinet
AC Input
Source
System Maintenance Bypass
AC Bypass
AC Input
SMB
AC
Output
G8000MM UPS
Module #1
Battery Cabinet
AC Bypass
AC Input
G8000MM UPS
Module #2
Battery Cabinet
AC Bypass
AC Input
G8000MM UPS
Module #3
Battery Cabinet
Isolated Redundant
• Backup for any UPS with Dual-Input
• Requires No Parallel Tie Cabinet for Smaller
Footprint & Lower Purchase Cost
• Feature can be Added Later to Accommodate
Expansion or Budget Limitations
• Simple, Reliable Design Significantly Increases
Reliability
G8000MM Options
Remote Monitoring
RemotEye II® offers remote real-time monitoring and analysis of
UPS operation via HTTP and SNMP.
• Multiple Monitoring Options: Locally at UPS, at Tie Cabinet,
Remotely via Local Area Network, or Annunciator
• Each UPS Module’s Data Port may be Tied to Optional
Network Monitor
• Optional Industrial Bus ProtoNode Module Supports:
‣ SNMP
‣ TCP/IP
‣ Modbus
‣ RTU
‣ AB Ethernet IP
‣ BACnet
‣ Metasys N2
‣ MSTP
An optional hard-wired remote status alarm panel (RSAP) enables
remote-monitoring of UPS alarm/status points up to 1000 feet
away.
Tie Cabinet System Monitor
In multi-module systems, the G8000MM UPS tie cabinet
has a five-inch color LCD display for monitoring unit and
system status.
Battery Cabinets & Battery
Racks
• Matching Battery Cabinets Provide Uniform
Appearance, Ease of Installation, & Simple
Connection
• Battery Cabinets Available Using Valve-Regulated
Lead Acid (VRLA)
• Battery System Available Using Flooded Batteries
• DC Breaker Disconnects Standard
Power Distribution Unit/Remote Power Panel Options
• PDUs Available in Wide Variety of Voltage
Options to Meet Specific Load Requirements
• PDUs Offered in Diverse Selection of
Distribution Options
• PDU and RPP Options Offered in Compact
Package to Maximize Floor Space
• RPPs Allow Ease of Installation for Server
Power Distribution
• RPPs Available with Monitoring Capabilities
AC Input
Source
Bypass
Input
G8000MM UPS
Battery Cabinet
PDU
RPP
Critical
Loads
RPP
PDU
RPP
RPP
Critical
Loads
G8000MM
Specifications
Model Number
Capacity
KVA/KW
T8MS3K10KK6XSN
T8MS3K15KK6XSN
T8MS3K22KK6XSN
TT8MS3K30KK6XSN
TT8MS3K37KK6XSN
T8MS3K50KK6XSN
T8MS3K62KK6XSN
TT8MS3K75KK6XSN
100/80
150/120
225/180
300/270
375/338
500/450
625/562
750/675
Topology
Input
True On-Line, Double-Conversion, IGBT PWM
AC Input: 480 V, Three-Phase, Three-Wire + Ground;
Bypass Input: 480 V, Three-Phase, Four-Wire + Ground
Voltage
Voltage Range
480 V, +15% to -15% (408 to 552 V Without Utilizing Battery)
Power Factor
> 0.98
Current THD
< 6% at 100% Load; 9% Maximum at 50% Load
Frequency
Output
60 Hz, ± 5%
Walk-In
5 to 30 Seconds (Adjustable)
Voltage
480/277 V, Three-Phase, Four-Wire + Ground
Frequency
60 Hz, ±0.05% in Free-Running Mode
Voltage Regulation
±1%
Power Factor
0.8 Nominal
0.9 Nominal
Voltage THD
2% Maximum THD at 100% Linear Load
5% Maximum THD at 100% Non-Linear load
Transient Response
±2% Maximum THD at 100% Step Load
±1% Maximum at Loss/Return of AC Power
±5% Maximum at Load Transfer to/from Static Bypass
Transient Recovery
≤ 16.7 ms
Voltage Unbalance
1% Maximum at 100% Unbalanced Load
Phase Displacement
1º Maximum at 100% Load
Overload (Inverter)
125% for 10 Minutes; 150% for 1 Minute
1000% for One Cycle
(Available with Bypass)
Overload (System)
Battery
Type
Maximum 500% for One Cycle (Available with Bypass)
Lead Acid (VRLA or Flooded)
Nominal Voltage
480 VDC
Minimum voltage
400 VDC
Charge Current (ADC)
13
19.5
29.3
39
48.7
Number of Cells
Environment
Cooling
5% to 95% Non-Condensing
Heat Rejection
(BTU/h)
18,353
28,465
44,105
60,894
76,117
96,271
120,339
144,407
Efficiency
93.7%
93.5%
93.3%
93.8%
93.8%
94.1%
94.1%
94.1%
Audible Noise @ 1m
68 DBA
72 DBA
76 DBA
78 DBA
Width
43.3 in.
47.2 in.
55.1 in.
Altitude
0 to 9000 ft.
Depth
Weight
Warranty
Service
78 DBA
80 DBA
76.8 in.
29.8 in.
114.2 in.
37.7 in.
Height
Standards
92.5
32º to 104ºF (0º to 40ºC) During Operating and Storage
Relative Humidity
Features
92.5
Forced Air
Temperature Range
Dimensions
65
240
129.9 in.
49.5 in.
79.7 in.
2061 lbs.
2579 lbs.
3263 lbs.
4564 lbs.
4916 lbs.
6923 lbs.
9193 lbs.
Dual-Input Feed, Output Isolation Transformer, RS232 and Dry Contact Interface, Single or Parallel Operation
UPS: UL1778, CUL, NEMA PE1, ISO9001, ANSI C62.41 (IEEE 587)
Three-Year Warranty on UPS Electronics Standard, Up to Five Years Available; Three-Year Warranty on Batteries with
Startup Purchase;
See Toshiba Warranty Policy for Full Details
24-Hour, 365-Day Technical Support 1-877-867-8773
Medium Voltage Motor
North American Headquarters and Manufacturing Facility (Houston, TX)
G7 Drive
TOSHIBA — Quality by Design
Toshiba’s culture and history are strongly rooted in quality. Our designs are
technologically innovative, and our products are manufactured from start to end
using only the highest quality domestic and foreign parts.
Product Warranty
Toshiba offers a comprehensive warranty program on its full line of industrial
products. Consult your salesperson or the factory for specific information.
Need to Know More?
Be sure to visit our website located at www.toshiba.com/ind for the latest
information on Toshiba products and services.
Customer Support Services
Toshiba offers 24-hour service nationwide, factory witness test, load bank tests,
and site evaluation services. For UPS field service call
1-877-867-8773. For all other assistance 1-800-231-1412.
UPS
MOTORS
ADJUSTABLE SPEED DRIVES
CONTROLS
INSTRUMENTATION
Available Through:
INDUSTRIAL DIVISION
13131 West Little York Road, Houston, Texas 77041
Tel 713/466-0277 Fax 713/466-8773
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
www.toshiba.com/ind
Copyright 08/2009
*61260-002*
PLC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement