GL-EXP-DIM-DALI Crestron Green Light® Dimmer Expansion Module, DALI®

GL-EXP-DIM-DALI Crestron Green Light® Dimmer Expansion Module, DALI®
GL-EXP-DIM-DALI
Crestron Green Light® Dimmer Expansion Module, DALI®
The Crestron Green Light® GL-EXP Series delivers a family of
professional lighting control modules for Cresnet® or DALI® based
lighting systems. Designed for easy installation on a wall or above a
suspended ceiling, these modules offer a perfect solution for adding
extra lighting zones to any system without requiring an additional
lighting cabinet.
The GL-EXP-DIM-DALI is a single-channel dimmer expansion module
designed to control LED, incandescent, magnetic low-voltage, neon/cold
cathode, and 2-wire dimmable fluorescent lighting loads. Utilizing
proprietary zero-cross filter technology, the GL-EXP-DIM-DALI
compensates for line voltage and frequency fluctuations, providing
superior immunity to power line noise and a dramatic reduction in lamp
flicker.
This expansion module communicates using the DALI (Digital Addressable
Lighting Interface) protocol, an open standard that focuses on
providing uniform, comfortable, and reliable lighting between devices
from different manufacturers.
The GL-EXP-DIM-DALI is designed to be mounted to a vertical
surface[1] and complies with UL 2043 standards for installation in
an environmental air-handling space above a suspended ceiling. Conduit
knockouts are provided on the bottom and lower sides of the unit. All
connections are made via screw terminals behind the front cover.
> Provides one channel of dimming control for 120 Volt or 277
Volt LED, incandescent, magnetic low-voltage, neon/cold
cathode, or 2-wire dimmable fluorescent lighting loads up to
16 Amps
>
>
>
>
>
Communicates with the DALI® protocol
Reduces lamp flicker through zero-cross filter technology
Has a built-in air gap relay
Provides extreme stability in noisy environments
Mounts to a wall or above a suspended ceiling[1]
> UL 2043 compliant for installation in plenum-rated ceilings
Connections
NEUT: (3) Captive screw terminals,[2] neutral connection for feed and load
LINE: (2) Captive screw terminals,[2] line power input and loop-through
DIM: (1) Captive screw terminal,[2] dimmed load output
N/C: (1) Captive screw terminal, no connection (not used)
DALI: (1) 2-pin 5mm terminal block;
Controls a single DALI loop (up to 32 ballasts);
3kVAC isolation between Cresnet/Ethernet ports;
Wire Gauge: 28 AWG to 12 AWG
Controls & Indicators
PWR: (1) Green LED, indicates line power is applied to the HOT terminal
NET: (1) Yellow LED, indicates network communication
ERR: (1) Red LED, indicates presence of an error message
ON/OFF: (1) Red LED and (1) pushbutton, LED indicates power is applied to
the load and pushbutton toggles power to the load on and off
RESET: (1) Pushbutton, initiates factory reset
SW1: (1) Two-position slide switch located under the module cover, enables/
disables zero-cross filter technology
SW2 - SW4: (3) Two-position slide switches located under the module cover,
not used
Environmental
SPECIFICATIONS
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Load Ratings
Dimmer Channels: 1
Load Rating: 16 Amps
Load Types: LED, incandescent, neon/cold cathode, magnetic low-voltage, 2wire dimmable fluorescent
Input Voltage
Enclosure
Surface mount[1] module with (2) integral mounting flanges, galvanized steel
with gray matte powder coat front panel, extruded aluminum heat sink, and
(4) 1/2” or 3/4” conduit knockouts provided on bottom and lower left & right
sides
120/277 Volts AC, 50/60 Hz
Dimensions
Communications
Height: 8.75 in (223 mm)
Width: 6.36 in (163 mm)
DALI®
www.crestron.com
800.237.2041
GL-EXP-DIM-DALI
Depth: 3.19 in (81 mm)
Weight
3.43 lb (1.56 kg)
Available Models
GL-EXP-DIM-DALI [6507035]: Crestron Green Light® Dimmer Expansion
Module, DALI®
Notes:
1.
Must be oriented upright, mounted to a vertical surface, with 6 in (153
mm) minimum spacing above and below it for proper ventilation and heat
dissipation.Captive screw terminals accept up to two 22 to 12 AWG (0.34 to
4.0 mm²) wires per terminal.
This product may be purchased from an
authorized Crestron dealer. To find a dealer, please contact the Crestron
sales representative for your area. A list of sales representatives is
available online at www.crestron.com/salesreps or by calling
800-237-2041.
The specific patents that cover Crestron products are
listed online at: patents.crestron.com
patents.crestron.com.
Certain Crestron products
contain open source software. For specific information, visit www.
crestron.com/opensource.
Crestron, the Crestron logo, and Crestron
Green Light are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. DALI is
either a trademark or registered trademark of ZVEI - Zentralverband
Elektrotechnik- und Elektronikindustrie in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may be
used in this document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims any proprietary interest in
the marks and names of others. Crestron is not responsible for errors in
typography or photography. Specifications are subject to change without
notice. ©2015 Crestron Electronics, Inc.
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2016 Crestron Electronics, Inc. | 15 Volvo Drive | Rockleigh, NJ 07647
Specifications subject to change without notice. 4/28/2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement