MIOE-3674 MIOE-3680 Specifications 4-port 10/100/1000 BaseT(X) 802.3af

MIOE-3674 MIOE-3680 Specifications 4-port 10/100/1000 BaseT(X) 802.3af
MIOE-3674
MIOE-3680
MIOE-3674
4-port 10/100/1000 BaseT(X) 802.3af
(PoE) Compliant Ethernet ports
2-Port CAN-Bus MIOe Module with
Isolation Protection
MIOE-3680
RoHS
COMPLIANT
2002/95/EC
Features
Features
ƒƒ Intel® server-grade GbE Mac Controller
ƒƒ Supports 12 VDC AT/ATX input power - - boost up to 15.4 watts at 48 VDC per PoE
port
ƒƒ Powered Device (PD) auto detection and classification
ƒƒ Supports IEEE 802.3u Auto-Negotiation 2.25 KV isolation protection on LAN ports
and power
ƒƒ Supports Jumbo frame (9,500 byte) and link aggregation
ƒƒ Supports IEEE-1588 and IEEE-802.1 AS PC CPU off-load by onboard DSP
processor
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Specifications
General
ƒƒ Compatibility
ƒƒ Speed ƒƒ No. of Ports ƒƒ Port Connector ƒƒ Protection ƒƒ Bus Interface IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x,
IEEE802.3af
10/100/1000 Mbps
2 or 4 Gigabit Ethernet Media Access Control (MAC)
and physical layer (PHY) ports.
8-pin RJ45
Built-in 2.25KV isolation protection on LAN ports and
power, ESD 8KV, EFT 2KV
MIOe PCI Express
Power Over Ethernet Port
ƒƒ 2 or 4 Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY)
ports.
ƒƒ Full controller compliance with IEEE 802.3.af standard for maximum 15.4 watts,
with power up to 48 V over existing Ethernet infrastructure, with no modifications
required
ƒƒ Standard IEEE 802.3 Ethernet interface provided for 1000BASE-T, 100BASE-TX, and
10BASE-T applications (802.3, 802.3u, and 802.3ab, 802.3x) 9014 bytes jumbo
frame support
Protection
ƒƒ Isolation Protection Environment
ƒƒ Operating Temperature 0°C to 50°C (normal)
0°C to 60°C * (Ambient; 0 CFS airflow)
Note! With an external heat sink. Airflow required for operation in 60°C ambient
temperature.
COMPLIANT
2002/95/EC
Operates two separate CAN networks at the same time
High speed transmission up to 1 Mbps
16 MHz CAN controller frequency
Optical isolation protection of 2,500 VDC ensures system reliability
I/O address automatically assigned by PCI PnP
LED indicates Transmit/Receive status on each port
Windows DLL library and examples included
Supports Windows CE5/CE6/XP/7 driver and utility
Supports Linux 2.4.xx / 2.6.xx; QNX 6.3x/6.4.x/6.5.x Intel x86 hardware platform
Specifications
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Interface Ports
Dimensions Connector Power Consumption PCIe bus spec. 1.2 compliant
2
102 x 145 mm
Dual DB9 male connectors
5 V @ 400 mA (Typical)
Communications
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Communication Controller NXP SJA-1000
CAN Transceiver NXP_TJA1051T
Signal Support CAN_H, CAN_L
CAN Controller Frequency 16 MHz
Speed (bps) Up to 1 Mbps programmable transfer rate
Protection
ƒƒ Isolation Protection 2.25KV isolation on LAN and power
Environment
ƒƒ Operating Temp. 2.25KV isolation on LAN and power
RoHS
-40 ~ 85°C (-40 ~ 185°F)
Ordering Information
ƒƒ MIOe-3680 2-port CAN-bus MIOe /PCIe Module with Isolation
Protection (CANbus transceiver board included)
Ordering Information
ƒƒ MIOe-3674
4-port 10/100/1000 BaseT(X) 802.3af (PoE)
Compliant Ethernet ports
Programmable Automation Controllers
All product specifications are subject to change without notice
Date updated: 18-Aug-2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement