1,000-volt systems 128 WATT thin film MODULE Amorphous Silicon/Microcrystalline Silicon IEC-Certified for 1,000-volt systems For Behind-the-Fence Applications Sharp: The first name in solar power. The last word in solar innovation. Offering one of the most efficient thin film photovoltaic products ever manufactured, Sharp becomes the provider of choice for multi-megawatt-scale power production. ENGINEERING EXCELLENCE Tandem-junction structure (amorphous silicon/ microcrystalline silicon) captures a wider part of the solar spectrum, converting more sunlight into electricity. HIGH VOLTAGE ADVANTAGE Proprietary design increases reliability by minimizing losses caused by module output variation. RELIABILITY Microcrystalline layer provides superior long-term stability and higher module efficiency. DURABLE Four bypass diodes ensure maximum output under non-uniform operating conditions. INNOVATIVE Single-layer glass with polymeric backskin lowers pounds per watt and transportation costs. Modules are sized to optimize the greatest amount of power, easily handled by one person. NA-V128HR THIN FILM PHOTOVOLTAICS: THE NEXT EVOLUTION OF SOLAR TECHNOLOGY Sharp’s thin film product pairs amorphous silicon with a layer of microcrystalline silicon to achieve high stability and performance. Produced with less than one percent of the silicon used in crystalline solar cells, thin film products offer high performance with less semiconductor material. With a low temperature coefficient for output power, thin film generates greater energy than its crystalline silicon counterpart in geographic regions where temperatures are high. In warm climates, this translates into more kilowatthours per kilowatt. Certified to IEC 61646, these modules are not UL-listed and are exclusively for behind-the-fence applications. The Dayton Power & Light Company, 1.1 MWdc Thin Film Leading the future of solar Since 1959, Sharp has led the solar electric industry with efficient, affordable systems and powers more homes and businesses than any other solar manufacturer in the world. From research and development, to system design, delivery, deployment and a more diverse product portfolio, Sharp is ready to create your customized solar solution, with an unyielding commitment to quality control and customer service. beco m e p ow er f ul 128 WATT nA-V128hR Amorphous Silicon/microcrystalline Silicon iEC-Certified for 1,000-volt systems (iEC 61646) ELECTRICAL DATA NAmEpLATE VALUEs NA-V128HR Maximum power Pmax 128 W Open-circuit voltage Voc 238 V Short-circuit current Isc 0.846 A Voltage at maximum power Vpmax 186 V Current at maximum power Ipmax 0.688 A Module efficiency η 9.0% Temperature coefficient – open circuit voltage β -0.3%/°C Temperature coefficient – short circuit current α +0.07%/°C Temperature coefficient – power γ -0.24%/°C MADE IN JAPAN The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25º C. The power output is subject to a manufacturing tolerance of + 10% / - 5% Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater (approximately 15% for power). Illumination of 1 kW/m2 (1 sun) at spectral distribution of AM 1.5 (ASTM E892 global spectral irradiance) spECIfICATIONs (I) EXTERIOR DImENsIONs Cell Tandem architecture of amorphous and microcrystalline silicon Cell Circuit 45 cells in series by 6 in parallel per quadrant: 4 quadrants in series Dimensions 39.7” x 55.5” x 1.8” (1009 x 1409 x 46 mm) Weight 40 lbs Connection type Project Specific Bypass diodes 4 (one per quadrant) Fire Rating Class C BACK ViEW A E spECIfICATIONs (II) Maximum system voltage 1,000 VDC Maximum mechanical load 2,400 Pa Series Fuse Rating - 40 to +90 °C Storage temperature - 40 to +90 °C Installation orientation D B 2 A Operating temperature (cell) Storage air humidity SiDE ViEW Up to 90 % Portrait Design and specifications are subject to change without notice. Sharp is a registered trademark of Sharp Corporation. All other trademarks are property of their respective owners. Contact Sharp to obtain the latest product manuals before using any Sharp device. f D A 39.7”/1009 mm B 55.5”/1409 mm C 1.8”/46 mm D 3.9”/100 mm E 1.2”/30.5 mm f 35.4”/900 mm SHARP ELECTRONICS CORPORATION 5901 Bolsa Avenue, Huntington Beach, CA 92647 1-800-SOLAR-06 • Email: [email protected] www.sharpusa.com/solar © 2010 Sharp Electronics Corporation. All rights reserved. C E 10F-068 • PC-07-10
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021