SymCom P2 777-LR-KW/HP-P2 Power Monitor Installation Instructions

Below you will find brief information for Power Monitor P2 777-LR-KW/HP-P2. This product is designed to protect 3-phase systems with operating voltages of 200-480VAC. The 777-LR-KW/HP-P2 is designed for low speed motor applications (less than 1800 rpm), lower power applications and in lightly loaded applications.

PDF Download
Document
Power Monitor P2 777-LR-KW/HP-P2 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Fail-Safe operation
  • Programmable Overload Protection
  • Ground Fault Protection
  • Voltage Unbalance Protection
  • Undercurrent (Underload) Protection

Frequently asked questions

The 777-LR-KW/HP-P2 is designed to protect 3-phase systems, it is an electronic overload relay, and is fully programmable for customized protection.

You can program the unit using a 9V battery. Follow the steps in the instructions manual.

The 777-LR-KW/HP-P2 has advantages over current monitors in low speed motor applications (less than 1800 rpm), lower power applications and in lightly loaded applications.

Yes, the setpoints can be locked to protect against unauthorized program changes.
Preparing document for printing…
0%