3130 sseng0000

3130 sseng0000
3130
Portable Pressure Calibrator
Safety Information
PN 4222249
February 2013
© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year
and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or
end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has
been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that
software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective
media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a
greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet or
Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when
product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product
which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to
that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit.
Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused
by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures caused by use
outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair costs and obtain
authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be
billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential
damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other
provision.
Fluke Corporation
Fluke Europe B.V.
P.O. Box 9090
P.O. Box 1186
Everett, WA 98206-9090
5602 BD Eindhoven
U.S.A.
The Netherlands
11/99
To register your product online, visit register.fluke.com
Introduction
The Fluke 3130 (the Product) is a portable pressure
calibrator that can use two methods to source pressure:
How to Contact Fluke Calibration
To contact Fluke Calibration, call one of the subsequent
telephone numbers:
•
An internal, electronic pump that has a range of -12 psi
to 300 psi (-0.8 bar to 20 bar)
•
Technical Support USA: 1-877-355-3225
•
An external connection that lets you use externallysourced, clean, dry air to regulate pressures to a
maximum of 300 psi
•
Calibration/Repair USA: 1-877-355-3225
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31-40-2675-200
•
Japan: +81-3-6714-3114
•
Singapore: +65-6799-5566
•
China: +86-400-810-3435
•
Brazil: +55-11-3759-7600
•
Anywhere in the world: +1-425-446-6110
For complete user information, see the 3130 Users
Manual that comes with the Product.
To see product information and download the latest
manual supplements, visit Fluke Calibration’s website at
www.flukecal.com.
To register your product, visit http://flukecal.com/registerproduct.
1
3130
Safety Information
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
Warnings
To prevent possible electrical shock, fire, or
personal injury:
2
•
Read all safety Information before you
use the Product.
•
Use the Product only as specified, or
the protection supplied by the Product
can be compromised.
•
Do not use the Product around
explosive gas, vapor, or in damp or wet
environments.
•
Do not use and disable the Product if it
is damaged.
•
Only assemble and operate highpressure systems if you know the
correct safety procedures. Highpressure liquids and gases are
hazardous and the energy from them
can be released without warning.
For safe operation and maintenance of the
Product:
•
Use only Fluke approved power
adapters to charge the battery.
See the “User-Replaceable Parts
and Accessories” section of the
Users Manual.
Portable Pressure Calibrator
Safety Information
Symbols used on the Product and in this manual are in Table 1.
Table 1. Symbols
Symbol
Meaning

Risk of danger. Important
information. See manual.

Pressure

Hazardous voltage. Risk of electrical
shock.
Symbol



Meaning
Conforms to European Union directives.
Battery
This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as
category 9 "Monitoring and Control
Instrumentation” product. Do not dispose of this
product as unsorted municipal waste. Go to
Fluke’s website for recycling information.
3
3130
Safety Information
General Specifications
Operating Temperature .......................................................... -10 °C to +50 °C (14 °F to 122 °F)
Storage .................................................................................. -20 °C to +55 °C (-4 °F to +131 °F)
Altitude.................................................................................... 2000 meters, limited by ac adapter
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising