User manual | Factory Gateway Leaflet

Multi-protocol Gateway
Programless Ethernet
Connectivity with Serial Devices
Factory Gateway Features
Network Your Serial Devices via Ethernet
for Data Collection and Remote Monitoring!
Easily Use Popular PC Applications!
Feature 1
Data Collection
Collect production data and replay the data
for system analysis.
Supports the Largest
Number of Protocols
in the Industry!
Feature 2
Data Transfer
Office PC
Transfer collected production data to common PC
applications via ADO, DDE, DLL, OPC, or SQL interfaces.
Compact PLCs
For daily reports!
For historical data!
Remote Monitoring by PC and by Internet
Viewer
Feature 3
Temperature
Controllers
Factory Gateway Data
Model No.: FGW-SE41-24V
* The Factory Gateway Configuration Tool and
Pro-Server with Pro-Studio Ver. 4.0 software
are required to enter operation settings.
Simple and quick remote
monitoring using graphic data
stored in Factory Gateway units.
Feature 4
Inverters
Multi-point Remote
Monitoring via a Web Server
Build efficient systems that reduce costs!
Build a monitoring system
using the Internet or an intranet.
Graphic Data Editing
with Windows-ready
GP-PRO/PBIII Screen Editor Software
Data Collection
Remote Monitoring
Feature 1
Feature 3
Feature 4
Feature 2
Ethernet
Easy Data Sharing without Programming!
Feature 5
Data Sharing
Automatic Sharing of
Production Data
For predictive
and preventive
maintenance, too!
Factory Gateway units
Feature 5
Feature 6
Link PLCs of different manufacturers without
special programming.
Feature 6
Monitor and use production data
collected in a GP/GLC unit
from factory-floor controllers.
Compact
PLC
Temperature
Controller
Inverter
Compact PLC
Temperature Controller
Inverter
Multi-protocol Gateway
PLC
ISO9001
JQA-1367
Factory Gateway
FGW-SE41-24V
General Specifications
FGW-SE41-24V
Rated Voltage(Rated Voltage Range)
DC24V(DC19.2V to DC28.8V)
Allowable Voltage Interruption
10ms or less
Power Consumption
10W or less
30A or less
AC 500V, 20mA for up to 1 minute (between charging and FG terminals)
Insulation Resistance
10MΩ or more at DC500V (between charging and FG terminals)
0°C to 55°C / -20°C to +60°C
Ethernet Interface
IEEE802.3 (10Base-T)
Tool Connector
Asynchronous TTL level nonprocedural command interface
* For device connection information, refer to the PDF version of the Device/PLC Connection manual. (URL: http://www.pro-face.com)
10%RH to 90%RH (non-condensing, wet bulb temperature: 39°C or less)
Air Purity (Dust)
0.1 mg/m3 or less (non-conductive levels)
Corrosive Gasses
Free of corrosive gasses
Atmospheric Pressure
800 hpa to 1114 hpa (2000 meters or lower)
External Dimensions
Unit: mm [in.]
IEC61131-2(JIS B 3501)Compliant
37 [1.46]
When vibration is NOT continuous:10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2
9 [0.35]
105 [4.13]
8 [0.31]
When vibration is continuous:10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2
X, Y, Z directions for 10 times (80min.)
TOOL
PWR
IEC61131-2 (JIS B 3501) Compliant
Shock Resistance
10BASE-T
STA
TxD
147m/s2, X, Y, Z directions for 3 times
RxD
Noise Voltage: 1200Vp-p
Noise Immunity
RST
Pulse Duration: 1µs
(via noise simulator)
Simple DIN rail mounting!
Easy maintenance!
4.5
[0.18]
Environmental
Stop Bit: 1 or 2 bits Parity: None, Odd or Even
Data Transmission Speed: 2400bps to 187.5kbps
Humidity / Storage Humidity
Vibration Endurance
Data Length: 7 or 8 bits
Serial Interface
In-rush Current
Storage Temperature
FGW-SE41-24V
Asynchronous Transmission Method: RS-232C / RS-422
Voltage Endurance
Operating Temperature/
Model
Item
131 [5.16]
Electrical
Functional Specifications
Model
Item
Rise Time: 1ns
COM
6kV (IEC 61000-4-2 Level 3)
Grounding
100Ω or less, or your country's applicable standard*1
Cooling Method
Natural air circulation
8
Structural
+
Electrostatic Discharge Immunity
1
Installation
DIN rail mount
Certifications
EN55011 class A, EN61000-6-2, UL508, CAN/CSA-C22.2 No.1010
DC24V
Weight
0.6kg [1.3lb.] or less (main unit only)
External Dimensions
W37[1.46] x H131[5.16] x D105[4.13] mm[in.] (excluding projections)
*1 Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation.
For further information, please contact your Pro-face distributor.
FG
Accessories
Item
Model No.
Description
Connects the Factory Gateway to a PC, and transfer screen
and other data. Can also be used for Factory Gateway unit's
internal 2-port feature. (when using GP-Viewer.)
Interface cables for communication between PLCs
or other external devices and the Factory Gateway.
Converts the SIO I/F to RS-422 terminal block.
Examples of programless functions made possible by combining Factory Gateway with the software described on the right.
Description
Function
Data Use
Data Distribution Data Collection
S G S V W
Protocol
Conversion
Data Distribution
Enables easy data exchange between connected
controllers at preset timing or triggered event.*2
Allows not only PLC but other type device data to be
GP/GLC Communications easily monitored on GP/GLC units.
Enables easy data collection at preset timing or event.
Combination with GP-Viewer also allows graphical display.
Playback
Enables easy playback of accumulated data. Desired
time periods are reproduced via on-screen display.
Application Support
Remote Monitoring
Programless conversion of serial communication
protocols to allow easy use of data on a host computer.
Allows access to data from PLCs, temperature
controllers, inverters, and others.
More than 200 protocols and 800 models supported.*1
Collection
Data Transfer Cable
Required Software
Design Operation
*4
Comprehensive server functions, including OPC, DDE, DLL, and
API, enable data exchange with a wide range of applications.
Simple and quick graphical monitoring of past and
Remote Monitoring present production screen data stored in Factory
Gateway units.
Enhanced
Further enhances the remote monitoring function to
Internet Monitoring enable easy monitoring via the Internet.*3
*1 Supported devices are continuously being added. For further information, refer to the Connectable Controllers list in the GP/GLC
General Catalog or http://www.pro-face.com.
GPW-CB02
GP410-IS00-O
RS-232C Cable
GP230-IS11-O
RS-422 Cable
RS-422 Connector Terminal Block GP070-CN10-O
Mitsubishi PLC A Series
GP430-IP10-O
Programming Port I/F Cable
Mitsubishi PLC FX Series
GP430-IP11-O
Programming Port I/F Cable
2-port Adapter II for the
GP070-MD11
Mitsubishi PLC A, QnA, FX Series
RS-422 cable for the
GP070-MDCB11
2-port Adapter II
PS-BH00
Connector Covers
Connects directly to the programming port I/F of
Mitsubishi PLC. (Factory Gateway cannot be used
simultaneously with the programming console.)
I/F unit for simultaneous use of Mitsubishi PLC
A,QnA, FX series peripheral equipment.
Connects the 2-port Adapter II and Factory
Gateway.
Side panel connector covers(3).
Manufacturer Devices / PLCs
Fuji
PLCs
PLCs
Fanuc
Matsushita
PLCs Siemens (SIMATIC) Temperature
Controllers
Toho
FATEK
Electric Works/NAIS
Toshiba
OMRON
Fuji
Toshiba Machine
Mitsubishi
RKC
Toyota
Modicon
GE Fanuc Automation
Shinko Technos
Yaskawa
Omron
Hitachi
Yamatake
Yokogawa
ORIM VEXTA
Izumi/Idec
Yokogawa M&C
Fuji
Keyence
Rockwell (Allen-Bradley) Inverters
Mitsubishi
Koyo/PLC Direct
Sharp
Shinko
Matsushita Electric
Servos Matsushita Electric
*2 Data transfer speed varies depending on the communications speed of Factory Gateway and the connected devices. (1s minimum)
*3 Requires a separate PC. No software necessary in the remote client PC.
*4 Certain feature restrictions apply.
S Pro-Server with Pro-Studio G GP-PRO/PBIII C-Package01
V GP-Viewer Ver. 1.0 W GP-Web Ver. 1.5
(GP-PRO/PBIII for Windows Ver. 6.0 or later)
for Windows ver. 4.0
www.pro-face.com
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
Worldwide Contacts:
General Info: [email protected]
Technical Info: [email protected]
All product names used in this catalog are the registered trademarks of their respective companies.
For printing purposes, the colors in this catalog may differ from those of the actual unit.
And actual user screens may differ from the screens shown here.
All information contained in this catalog is subject to change without notice.
2002 Digital Electronics Corporation All Rights Reserved.
Global Head Office
Taiwan
France
Scandinavia
Digital Electronics Corporation
8-2-52 Nanko-higashi
Suminoe-ku, Osaka 559-0031
JAPAN
Tel: +81-(0)6-6613-3116
Fax: +81-(0)6-6613-5888
http://www.pro-face.com
[email protected]
Pro-face Taiwan Co., Ltd.
2F, No. 69 Fushing North Road
Taipei 105
TAIWAN R.O.C.
Tel: +886-(0)2-2772-5208
Fax: +886-(0)2-8773-7892
http://www.proface.com.tw
[email protected]
Pro-face France S.A.S.
Le Vinci
1, rue Henri Becquerel
77290 Mitry-Mory
FRANCE
Tel: +33 (0)1 60 21 22 91
Fax: +33 (0)1 60 21 22 92
http://www.proface.com
[email protected]
Pro-face Scandinavia ApS
Copenhagen Europe Center
Vesterbrogade 149
1620 Copenhagen V
DENMARK
Tel: +45-33 27 06 16
Fax: +45-33 27 05 06
http://www.proface.com
[email protected]
China
North/South American Head Office
Germany
United Kingdom
Pro-face Deutschland GmbH
Albertus-Magnus-Straβe 11
42719 Solingen
GERMANY
Tel: +49 (0)212 258 260
Fax: +49 (0)212 258 2640
http://www.pro-face.de
[email protected]
Pro-face UK, Ltd.
The Venture Centre,
The Science Park,
Coventry CV4 7EZ
ENGLAND
Tel: +44 (0)2476 692363
Fax: +44 (0)2476 692365
http://www.profaceuk.com
[email protected]
Pro-face China Representative Office
3606C, Southern Security Tower
No. 580, Nanjing Road West
Shanghai 200041
P. R. CHINA
Tel: +86-(0)21-5234-1646
Fax: +86-(0)21-5234-1649
http://www.proface.com.cn
[email protected]
South Korea
Pro-face Korea Co., Ltd.
Room #701, Jaeyoung Building
678-10 Deungchon-dong
Kangseo-ku, Seoul 157-030
SOUTH KOREA
Tel: +82-(0)2-658-6835
Fax: +82-(0)2-3664-6839
http://www.proface.co.kr
[email protected]
Pro-face America, Inc. / Xycom
750 North Maple Road
Saline, MI 48176
U.S.A.
Tel: +1-734-429-4971
Fax: +1-734-429-1010
http://www.profaceamerica.com
[email protected]
European Head Office
Pro-face Europe B.V.
Amsteldijk 166
1079 LH Amsterdam
THE NETHERLANDS
Tel: +31 (0)20 6464 134
Fax: +31 (0)20 6464 358
http://www.proface.com
[email protected]
Italy
Pro-face Italia S.p.A.
Via Carcano 44
20033 Desio (MI)
ITALY
Tel: +39 0362 33 71 63
Fax: +39 0362 30 77 25
http://www.proface.com
[email protected]
NP020419-FGW-01E10

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project