- Computers & electronics
- Audio & home theatre
- Audio equalizers
- Samson
- CONCERT SERIES IV
- Specification
advertisement
CONCERT SERIES IV
M I C R O P R O C E S S O R
T R U E D I V E R S I T Y
W I R E L E S S S Y S T E M S
V H F 1 7 3 . 6 M H z — 2 1 6 . 2 M H z
• Microprocessor True Diversity ™ .
• 19˝ rackmount metal chassis.
• Balanced XLR and unbalanced 1/4˝ outputs.
• 300 Feet overall range.
• Removable antennas for front or rear mounting.
• Transmitters use 9V battery (18-20 hours).
• Multi-segment audio level meter.
• Variable squelch and audio output controls.
• Approved for worldwide use.
• Made in the U.S.A.
• 3 Year warranty.
• Up to 13 systems can be used simultaneously.
Concert IV is a Microprocessor True Diversity
VHF wireless system designed for use in live performance applications and permanent installations. This metal case, one-space rack-mount wireless system provides superior performance and durability. Concert IV features balanced XLR and unbalanced 1/4" outputs, removable antennas for front or rear mounting, a front panel multi segment audio level meter, and variable squelch and audio output controls.
Concert IV is available in handheld microphone, lavalier and headset systems, all with a wide variety of mic elements to choose from.
Instrument systems (with 1/4” connector or wind instrument mic) are also available. All transmitters utilize a 9V alkaline battery with a 18–20 hour battery life. Concert IV is approved for worldwide use, has a 3 year warranty and is made in the U.S.A.
Contact:
Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: (516) 364-2244 • Fax: (516) 364-3888 • www.samsontech.com
ARCHITECT’S & ENGINEER’S
SPECIFICATION
The Samson Concert Series IV VHF Wireless System shall be of a single-channel, crystal-controlled oscillator type operating on selected frequencies from 174.6 - 213.2 MHz. The
System shall include a beltpack or handheld transmitter and a receiver, and shall allow operation of at least thirteen simultaneous systems on separate channels. The transmitter and receiver shall incorporate compander circuitry for noise reduction and maximum dynamic range.
The receiver shall provide a balanced microphone-level output on a male XLR-type connector and an unbalanced microphone-level output on a 1/4
″ phone connector. The unit shall have a 5 segment AF level meter indicating 10%,
25%, 75%, 100% and 125% of audio signal. The audio output level shall be adjustable with a variable attenuator. The receiver shall incorporate a power LED and dual LEDs for carrier indication. The receiver shall have an automatic signal sensing squelch circuit with a variable attenuator. The receiver shall incorporate Microprocessor True Diversity circuitry for automatic antenna switching. The receiver shall use two
12 VDC powered 1/4-wave removable antennas on M-J connectors. The receiver shall be powered by 115 Vac, 50/60 Hz via a supplied 12 VDC adapter. The receiver shall be notified under FCC rules, Part 15, and DOC certified under RSP 121.
The receiver shall be of a rack-mount type. Dimensions of the receiver shall be 19
″
(480 mm) wide, 3.8
″
(96 mm) deep and 1.7
″
(44 mm; 1 rack space) high. Weight of the receiver shall be 3 lb. (1.4 kg).
The beltpack transmitter shall provide either a microphone-level input on a Switchcraft TA3F P3-type connector or an instrument-level input on a 1/4
″ phone connector. The beltpack audio input sensitivity or handheld microphone output level shall be adjustable with a variable attenuator. The transmitter shall provide a mute switch. The transmitter shall incorporate a battery strength LED and shall use an internal dipole antenna. The transmitter shall be powered by a 9 V alkaline battery and shall provide a nominal battery life of not less than 18 hours. The transmitter type shall be accepted under appropriate FCC rules. Dimensions of the beltpack transmitter shall be 2.6
″
(65 mm) wide, 4.3
″
(110 mm) deep and .9
″
(22 mm) high. Weight of the beltpack transmitter shall be 3.1 oz. (90 g). The System shall carry a three-year warranty.
The System shall be a SAMSON CONCERT SERIES IV VHF
CONCERT SERIES IV SPECIFICATIONS
RF Frequency Range:
Frequency Response:
Squelch Sensitivity:
Antenna Terminals (Receiver)
173.6 - 216.2 MHz
40 Hz to 15 kHz ±3 dB
18 dBu
50
Ω
, M-J input connector powered 12 VDC 160 mA max.
Antenna Type:
Receiver:
Transmitter (HT4):
Transmitter: (CT4G/CT4L):
Antenna Gain:
AF Level Meter:
1/4
λ rod
Internal dipole
External (Gtr/Mic cable)
< 2.14 dB
10%, 25%, 75%, 100%, 125%
± 150 kHz @ -60 dB Bandwidth Selectivity:
Audio Outputs (Receiver):
Unbalanced
Balanced
Input Power (Receiver):
Maximum Audio Input Level
Transmitters:
(-10 dB, 5 k 1/4
′′ phone type connector)
(-30 dBm, 600
Ω
, XLR type connector)
11 - 13.2 Vdc 1.9 W, 160 mA
RF Sensitivity:
Signal To Noise Ratio:
-30 dB adjustable (
∆ f=±15 kHz)
21 dBu @ s/n 55 dB
> 94 dB (IHF-A weighted)
Dimensions
Receiver (w/o antennas):
Transmitter (CT3L/CT3G)
Transmitter (HT3):
Weight:
Receiver (including antennas):
Transmitter (CT3L/CT3G):
Transmitter (HT3):
19
″
(w) x 3.8
″
(d) x 1.7
″
(h)
480 mm (w) x 96 mm (d) x 44 mm (h)
2.6
″
(w) x 4.3
″
(d) x .9
″
(h)
65 mm (w) x 110 (d) x 22 (h) varies with mic type
3 lb. / 1.4 kg
3.1 oz. / 90 g varies with mic type
Specifications subject to change without notice. © 1998 SAMSON
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project