Trailer Wiring and Connectors
TRAILER WIRING / ELECTRICAL CONNECTORS
®
T-ONE CONNECTORS
T-One Connectors require no splicing of vehicle wires. Simply locate your vehicles wiring harness connector,
®
®
unplug the connection and insert the T-One Connector into the vehicle’s harness. No special tools required.
• “Factory” appearance • Quick and easy installation • Solid, weatherproof, one-piece construction
• No cutting, splicing or taping of vehicle wires • Includes converter where needed • 16 gauge wire with 4-Flat plug & cap
CALL US FOR HELP WITH YOUR VEHICLE APPLICATION!
REPLACEMENT FACTORY TOW PACKAGE WIRING HARNESSES
• Exact replacement for damaged factory wiring harnesses • Installs in seconds on vehicles not factory pre-wired
• Upgrades vehicles from 4-Flat factory wiring to 6 or 7-Way connectors
• Connects directly to standard factory connector • Attractive point-of-purchase packaging
CALL US FOR HELP WITH YOUR VEHICLE APPLICATION!
MULTI-PLUG T-ONE® CONNECTORS
• Ability to tow trailers with different style trailer connectors
• Durable plastic shell • Weather tight seal • Attractive point-of-purchase pack
40955
20135
Part No.
Description
40955
7/4-Way Multi-Plug T-One® Connector
Clam - Hoppy
GM / Ford / Nissan (See Application Guide For Fit Information)
Clam - Tow Ready
7/4-Way Multi-Plug T-One® Connector
Chrysler/Dodge/Jeep (See Application Guide For Fit Information)
Clam - Tow Ready
7/4-Way Multi-Plug T-One® Connector
Toyota / Lexus (See Application Guide For Fit Information)
20135
20137
Packaging
20137
7-WAY U.S. CAR ELECTRICAL CONNECTORS
118015
11-893
• Replacement for O.E.M. Connectors
• Durable plastic shell
• Weather tight seal
Part No.
20047
11-916
Description
Packaging
118015
7-Way U.S. Car Connector (car end)
11-893
GM / Ford (See Application Guide for fit information)
20047
7-Way U.S. Car Connector (car end)
11-916
GM / Ford (See Application Guide for fit information)
Note: Use Installation Bracket 20212
Clam - Tow Ready
Bulk - Pollak
Clam - Tow Ready
Bulk - Pollak
TRAILER LIGHT POWER MODULE WITH INTEGRATED CIRCUIT PROTECTION
ZCI™ UNIVERSAL T-CONNECTOR - ZCI™ sensor technology and direct connection to the tow vehicle battery,
eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12 volt system only.
• NO CUTTING OR SPLICING VEHICLE WIRING!
• Isolates Trailer Light Operation from Tow Vehicle’s Electrical System • Works with 2 or 3 wire systems
• Works with PWM or Multiplexed systems requiring 2, 3 or 4 wire hookup
• Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
• Works with low side switched vehicles (Ford Windstar) • Lead-free surface mount technology
• Will work with standard & LED bulbs
NEW!
Part No.
Description
Packaging
119250
119251
ZCI™ Power Module
ZCI™ Power Module & Wiring Kit (119250 & 118151)
Clam - Tekonsha
Clam - Tekonsha
94
119250
TRAILER WIRING / ELECTRICAL CONNECTORS
HOW IT WORKS
• ModuLite® connects directly to vehicle’s battery & powers the towing lights
• ModuLite® provides from 2.1 to 7.5 amps of power per circuit to the trailer lights, depending on the unit
INSTALLATION
ModuLite® power modules typically install in 30 to 45 minutes depending on the ease of routing the power
supply wire from the battery to the rear of the vehicle.
COMPATIBLE VEHICLES FOR MODULITE®
• Vehicles that have separate turn and stop light circuits (3 wire system)
• ModuLite® can also be used on vehicles with standard 2 wire systems to reduce electrical load
• Hazard flasher override to illuminate the trailer brake lights during tow vehicle flasher operation is provided
WHEN YOU NEED MODULITE®
•
•
•
•
Trailer has more than one light assembly per side and is equipped with multiple clearance or running lights
If the tow vehicle may tow a variety of different trailers
Vehicle is equipped with lamp out sensors or other electronic devices that could be damaged by voltage fluctuations
Owners manual cautions against adding additional loads to electrical circuits
For example: Jeep Grand Cherokee
“Do not connect trailer lighting system directly to the lighting system of your vehicle. Failure to comply could damage
the vehicles electrical system and/or result in personal injury.”
HOW TO DETERMINE
THE RIGHT
MODULITE® FOR YOU
The converter you choose depends
on the type of trailer you’ll be towing
and the car or truck you’ll be towing
it with. The electrical systems on
some vehicles are designed to handle
the power needs of the vehicle only.
Be sure to consult your owner’s
manual for their recommendations.
• 2 wire systems have stop
and turn on the same circuit
• 3 wire systems have brake and
turn lights on separate circuits
Bulb Type
Candle Power
Rated Amps
Watts
57—1895
2057
2
32
2
—
21
15
21
15
12
32
32
3
3
2
0.27
2.10
0.48
—
1.40
0.98
1.44
1.04
1.07
2.10
2.10
0.59
0.35
0.27
3.780
26.880
6.720
35
17.920
12.544
18.432
13.312
13.696
26.880
26.880
8.260
4.900
3.780
MR16
921
922
1141
93
105
1156
1157
168
194
MODULITE® PROTECTOR
• The unit is rated for up to 2.1 amps for Turns/Stops circuits and 5.6 amps for the Taillight circuit
• Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer
functions on and off
• Will work with either LED/Incandescent bulbs (vehicle & trailer)
• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and
installation wiring mishaps
• Designed not to send feedback thru the vehicle circuits
• The trailer brakes will override the hazard lamps when the brake is activated
• The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the
converter to turn on fully and gives the trailer lights full brightness during activation
• Will work with most vehicles that have a multiplex system for lighting
• Will not work with vehicles with low-side switch
• Can be used on a 2 wire or 3 wire system
• All solid-state components in potted encapsulation
REPLACES
• Includes integrated protective cover
Part No.
119179
119180
Description
®
Modulite Protector
Modulite® Protector & Wiring Kit (119179 & 118151)
119176
Packaging
Clam - Tow Ready
Clam - Tow Ready
119180
119179
95
TRAILER WIRING / ELECTRICAL CONNECTORS
MODULITE® HD PROTECTOR
• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
• Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on
and off
• Will work with either LED/Incandescent bulbs (vehicle & trailer)
• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation
wiring mishaps
• Designed not to send feedback thru the vehicle circuits
• The trailer brakes will override the hazard lamps when the brake is activated
• The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the converter to
turn on fully and gives the trailer lights full brightness during activation
• Will work with most vehicles that have a multiplex system for lighting • Will not work with vehicles with low-side switch
• Can be used on a 2 wire or 3 wire system • All solid-state components in potted encapsulation
REPLACES
Part No.
Description
Packaging
119147
119148
Modulite® HD Protector
Modulite® HD Protector & Wiring Kit (119147 & 118151)
Clam - Tow Ready
Clam - Tow Ready
NEW DESIGN!
119146
119148
119147
MODULITE® HD PLUS
• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the
Taillight circuit
• Universal ModuLite designed to be used on most vehicles plus the hard to wire
vehicles
• Draws power directly from the vehicle battery and uses less than 5mA of the
vehicle circuit for sensing to turn the trailer functions on and off
• Will work with either LED/Incandescent bulbs (vehicle & trailer)
• Has integrated re-settable Short Circuit and Overload protection, to safeguard
itself and the tow vehicle from shorts and installation wiring mishaps
• Designed not to send feedback thru the vehicle circuits
• The trailer brakes will override the hazard lamps when the brake is activated
• Advanced circuitry works in all standard applications as well as vehicles with ST
and STT pulse width modulation (PWM) systems
• Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes and VW)
• Will not work with vehicles with low-side switch
• Can be used on a 2 wire or 3 wire system
• All solid-state components in potted encapsulation
• Includes integrated protective cover
119190
Part No.
119191
119190
119191
Description
®
Modulite HD Plus
Modulite® HD Plus Includes Wiring Kit (119190 & 118151)
Packaging
Clam - Tow Ready
Clam - Tow Ready
MODULITE® WIRING KITS
Part No.
Description
Packaging
118151
Wiring Kit For Installing All ModuLites®, Includes 10 Amp Fuse
(20’ Length)
Clam - Tow Ready
96
118151
TRAILER WIRING / ELECTRICAL CONNECTORS
MODULITE® HD PROTECTOR W/BACKUP
• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit and 4.2 amps for Back-Up circuit
• Draws power directly from the vehicle battery. Uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off
• Will work with either LED/Incandescent bulbs (vehicle & trailer)
• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and
installation wiring mishaps • Designed not to send feedback thru the vehicle circuits
• The trailer brakes will override the hazard lamps when the brake is activated
• The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the converter to
turn on fully and gives the trailer lights full brightness during activation
• Will work with most vehicles that have a multiplex system for lighting • Will not work with vehicles with low-side switch
• Integrated 5-flat electrical wiring connector. Fifth circuit added for surge brake lockout or backup light circuit on trailers (some units will
come with a 5-way cap, mounting bracket sold separately)
• Can be used on a 2 wire or 3 wire system • All solid-state components in potted encapsulation • Includes integrated protective cover
Part No.
Description
119177
Modulite® HD Protector w/Backup & 5-Flat Connector for Backup Clam - Tow Ready
Light or Surge Brake Lockout Circuit
Packaging
NEW
DESIGN!
119177
MODULITE® ULTRA
• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 16 amps for the Taillight circuit
• Universal ModuLite designed to be used on most vehicles plus the hard to wire vehicles
• Draws power directly from the vehicle battery. Uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off
• Will work with either LED/Incandescent bulbs (vehicle & trailer)
• Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and
installation wiring mishaps • Designed not to send feedback thru the vehicle circuits
• The trailer brakes will override the hazard lamps when the brake is activated
• Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems
• Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes and VW)
• Will not work with vehicles with low-side switch • Can be used on a 2 wire or 3 wire system
• All solid-state components • Includes integrated protective cover
Part No.
119192
Description
®
ModuLite Ultra
Packaging
Clam - Tow Ready
NEW
DESIGN!
119192
TAILLIGHT CONVERTERS
• Rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
• Adapts import and domestic vehicles with separate turn and stop lights (3 wire system) to standard trailer taillight wiring (2 wire system)
• Will work with either LED/Incandescent bulbs (vehicle & trailer) • Designed not to send feedback thru the vehicle circuits
• All solid-state components in potted encapsulation • Will not work with vehicles with low-side switch
• Includes integrated protective cover
Part No.
Description
Packaging
119130
119178
Taillight Converter with 60” 4-Flat Car End Connector
Taillight Converter with 60” 4-Flat Car End Connector
CIRCUIT PROTECTED CONVERTER
Connects A Tow Vehicle With A 2 Wire System To A Towed Vehicle
With A 3 Wire System
Clam - Tow Ready
Clam - Tow Ready
118158
119130
Clam - Tow Ready
119178
97
118158
TRAILER WIRING / ELECTRICAL CONNECTORS
4-WAY FLAT WIRE HARNESSES
All Tow Ready® 4-Flat Wiring conforms to SAE Spec. J1128 assuring you of
consistent quality and reliability. 4-Flat harnesses come in a variety of
lengths and packages to fit your every need.
Features Include: • 18 gauge bonded wires • Taillight, stop and turn functions
printed on wire
• Ground wire runs full length of assembly
4-WAY FLAT CAR END WIRE HARNESSES
• 7.5 Amps max per circuit
Part No.
Description
Packaging
118002
60” Car End - Includes 4 Wire Taps
Clam - Tow Ready
4-WAY FLAT TRAILER END WIRE HARNESSES
• 7.5 Amps max per circuit
Part No.
Description
Packaging
118004
118009
118033
12” Trailer End
21’ Trailer End
48” Trailer End
Clam - Tow Ready
Clam - Tow Ready
Clam - Tow Ready
4-WAY FLAT CAR & TRAILER WIRE HARNESSES
• 7.5 Amps max per circuit
• Includes both car and trailer 4-Flat Connectors wired end to end
Part No.
Description
Packaging
118045
118185
60” Car & Trailer End Loop - includes 4 wire taps
18” Car & Trailer End Loop - includes 4 wire taps
Clam - Tow Ready
Clam - Tow Ready
4-WAY FLAT DUST COVER
Part No.
Description
Packaging
20112
Dust Cover For 4-Flat Connector
Clam - Tow Ready
4-WAY ROUND CONNECTORS
118077
11-408P
11-403P
11-400P
Part No.
Description
Packaging
118077
11-408P
118101
11-410P
118102
11-409P
11-400P
11-402P
11-403P
11-404P
4-Way Round Chrome Car End & Trailer End Plug Connectors
Clam - Tow Ready
Boxed - Pollak
Clam - Tow Ready
Boxed - Pollak
Clam - Tow Ready
Boxed - Pollak
Boxed - Pollak
Boxed - Pollak
Boxed - Pollak
Boxed - Pollak
4-Way Round Chrome Car End Connector
4-Way Round Chrome Trailer End Connector
4-Way Round Heavy-Duty Car & Trailer End Plug Connectors
4-Way Round Heavy-Duty Trailer End Connector
4-Way Round Heavy-Duty Trailer End Connector with Guard
4-Way Round Heavy-Duty Car End Connector
ATTACHMENT & MOUNTING BRACKETS
118144
118140
118137
Part No.
Description
Packaging
118140
Attachment Bracket For 4-Flat, 5-Flat, 4-Way & 5-Way Round
Connectors, Includes Clamp (Piece 1 Of 2, Short Bracket)
Mounting Bracket For 4-Flat Connectors, (Piece 2 Of 2)
Mounting Bracket For 4, 5 & 6-Way Round Connectors, (Piece 2 Of 2)
Clam - Tow Ready
118144
118137
98
Clam - Tow Ready
Clam - Tow Ready
TRAILER WIRING / ELECTRICAL CONNECTORS
5-WAY FLAT ELECTRICAL WIRE HARNESSES
• Fifth wire added for surge brake lockout or backup light circuit
on today’s newer trailers
• 7.5 amps maximum per circuit
Part No.
Description
Packaging
118016
V5500B
118017
V5500A
5-Flat 72” Car End Wiring Harness
Clam - Tow Ready
Clam - Peterson
Clam - Tow Ready
Clam - Peterson
5-Flat 48” Trailer End Wiring Harness
5-WAY ROUND CONNECTORS
Part No.
Description
Packaging
11-500
5-Way Round Chrome Car End & Trailer End Plug Connectors
Spring Loaded Cover Mounting holes 1-3/4” on centers
5-Way Round Chrome Trailer End Connector
5-Way Round Chrome Car End Connector
Boxed - Pollak
11-501
11-502
11-500
Boxed - Pollak
Boxed - Pollak
6-WAY ELECTRICAL CONNECTORS
• Durable metal shell
Part No.
Description
Packaging
118036
118037
6-Way Heavy-Duty Metal Car End Socket Connector
6-way Heavy-Duty Metal Trailer End Plug Connector
Clam - Tow Ready
Clam - Tow Ready
6-WAY HD METAL CONNECTORS
Heavy duty die cast corrosion resistant housing, spring loaded car end cover,
and coded terminals. Interchangeable with other standard 6-way connectors.
11-605
11-616
Part No.
Description
Packaging
11-603
11-604
11-609
11-608
11-605
11-616
6-Way Metal Car End (11-609) and Trailer End (11-604)
6-Way Metal Trailer End Only
6-Way Metal Car End Only
6-Way Metal Car End With Rubber Boot (11-616)
6-Way Metal Trailer End With Spring Guard Only
Connector Boot for the Pollak Part#: 11-607 & 11-608
Bulk - Pollak
Bulk - Pollak
Bulk - Pollak
Boxed - Pollak
Bulk - Pollak
Boxed - Pollak
6-WAY SQUARE WIRE HARNESSES
• Used on tent trailers
Part No.
Description
Packaging
12-601
6-Way Square Connector Kit (Male & Female Ends)
48” Wire Leads on Female End - 12" Wire Leads on Male End
6-Way Square to 4-Flat Adapter - 12" Loop
Boxed Pollak
118104
12-601
118140
• 7.5 amps maximum per circuit
Bagged - Tow Ready
ATTACHMENT & MOUNTING BRACKETS
11-617
118137
Part No.
Description
Packaging
118140
Attachment Bracket For 4-Flat, 5-Flat, 4-Way & 5-Way Round
Connectors, Includes Clamp (Piece 1 Of 2, Short Bracket)
Mounting Bracket For 4 & 6-Way Round Connectors, Zinc
Mounting Bracket For 4, 5 & 6-Way Round Connectors, (Piece 2 Of 2)
Mounting Bracket For 5-Flat Connectors, (Piece 2 Of 2)
Clam - Tow Ready
11-617
118137
20046
20046
99
Bulk - Pollak
Clam - Tow Ready
Clam - Tow Ready
TRAILER WIRING / ELECTRICAL CONNECTORS
6-WAY SUPER SEALED CAR END WITH CABLE
Prewired, 6-Way car end sealed with 4 ft. of UL listed 6-way cable (White, Blue and Red-10 gauge; Yellow, Brown and
Green-14 gauge). Solid brass terminals and housing of industrial-strength, glass-filled thermoplastic, door with EPDM
rubber gasket and heavy duty stainless steel spring.
Part No.
Description
Packaging
50-86-004 6-Way Super Sealed Car End w/4 Ft. Cable
Bulk
6-WAY MOLDED TRAILER END CONNECTOR WITH CABLE
Encapsulated terminals and wires to form one weather resistant, non-corrosive assembly. Molded connector can
be used with thermo-plastic or metal 6-way car end connectors.
Part No.
Description
Packaging
50-61-006 6-Way Molded Trailer Cord w/6 Ft. Cable, 6-14 gauge
Bulk
7-WAY RV BLADE STYLE CONNECTORS
Part No.
Description
Packaging
118020
12-707
118021
12-706
12-705
7-Way Plastic Car End Socket Connector
Clam - Tow Ready
Bulk - Pollak
Clam - Tow Ready
Bulk - Pollak
Bulk - Pollak
118030
12-703
118031
12-702
12-700
7-Way Plastic Trailer End Plug Connector
7-Way Plastic Trailer End & Car End Plug Connector
Includes 12-706 & 12-707
7-Way Metal Car End Socket Connector
Clam - Tow Ready
Bulk - Pollak
Clam - Tow Ready
Bulk - Pollak
Bulk - Pollak
7-Way Metal Trailer End Plug Connector
7-Way Metal Trailer End & Car End Plug Connector
Includes 12-703 & 12-703
7-WAY PIN STYLE CONNECTORS
Pin Style Plug has round brass pins to ensure minimum voltage drop and
pull grips for easy insertion and removal. Available in Poly or Die-Cast
Part No.
Description
Packaging
11-720
11-700
11-750
11-702
11-723
11-704
11-752
11-710EP
11-761
11-762
11-763
11-771
7-Way Die-Cast Truck End Only
7-Way Die-Cast Trailer End Only
7-Way Die-Cast Truck & Trailer End (11-720 & 11-700)
7-Way Die-Cast Trailer End Only With Spring Guard
7-Way Plastic Truck End Only
7-Way Plastic Trailer End Only
7-Way Plastic Truck & Trailer End (11-723 & 11-704)
7-Way Plastic Trailer End Only With Spring Guard
Boot for 7-Way Truck End
Boot for 7-Way Trailer End
Cable Guard for 11-700 & 11-704
Zinc Mounting Bracket for 11-XXX Series Connectors
Bulk - Pollak
Bulk - Pollak
Bulk - Pollak
Boxed - Pollak
Bulk - Pollak
Bulk - Pollak
Bulk - Pollak
Boxed - Pollak
Bulk - Pollak
Bulk - Pollak
Bulk - Pollak
Bulk - Pollak
ATTACHMENT & MOUNTING BRACKETS
Part No.
Description
Packaging
118136
Attachment Bracket For 6 & 7-Way Round Connectors,
Includes Clamp (Piece 1 Of 2, Long Bracket)
Mounting Bracket For 7-Way Car Connectors, (Piece 2 Of 2)
Mounting Bracket For 7-Way Car Connectors, (Piece 2 Of 2)
Mounting Bracket For 7-Way Car Connectors, Zinc
Mounting Bracket For 7-Way Car Connectors, Coated
6-Way and 7-Way Connector Mounting Box For Hitches
w/2-1⁄2” Sq. Cross Tubes
6-Way and 7-Way Connector Mounting Box With Universal Fit For Both
Square And Round Tube Hitches
Clam - Tow Ready
20212
118138
12-701
12-711
118156
118159
Clam - Tow Ready
Clam - Tow Ready
Bulk- Pollak
Bulk- Pollak
Display Box - Tow Ready
Display Box - Tow Ready
100
20212
118136
118138
12-701
118159
TRAILER WIRING / ELECTRICAL CONNECTORS
7-WAY SUPER SEALED CAR END WITH CABLE
Prewired 7-way car end sealed with 4 ft. of UL listed 7-way cable. Solid brass
terminals, housing of industrial-strength, glass-filled thermoplastic, door with EPDM rubber
gasket and heavy duty stainless steel spring.
Part No.
Description
Packaging
50-87-004 7-Way Super Sealed Car End w/4 Ft. Cable
Bulk
50-87-004
7-WAY MOLDED TRAILER END CONNECTORS
WITH CABLE - RV CLOCKING*
7-way plastic trailer connector molded to heavy duty 7-way insulated cable. Primary wire gauges within the
insulated cable are: Black and White-10 gauge, Blue-12 gauge, Brown-Red-Green-Yellow-14 gauge.
Can be used with thermo-plastic or metal 7-way car end connectors.
Part No.
Description
Packaging
50-67-001 7-Way Molded Trailer Cord w/6 Ft. Cable
50-67-003 7-Way Molded Trailer Cord w/8 Ft. Cable
50-67-005 7-Way Molded Trailer Cord w/10 Ft. Cable
Bulk
Bulk
Bulk
Double Ended 7-Way Molded Trailer End with Cable
Part No.
Description
Packaging
50-67-901 Double Ended 7-Way Molded Trailer Cord w/6 Ft. Cable
Bulk
50-67-901
VEHICLE SPECIFIC USCAR 7-WAY PRE-WIRED CABLES FOR
HOOK-UP OF FIFTH WHEEL AND GOOSENECK TRAILERS
Allows remote wiring in pickup beds or other hard to access areas when towing a fifth wheel or gooseneck
trailer, using an OEM USCAR connector. Features durable plastic housing with weather tight seal.
CALL US FOR HELP WITH YOUR VEHICLE SPECIFIC APPLICATION!
90° 7-WAY PRE-WIRED CABLES FOR
HOOK-UP OF FIFTH WHEEL AND GOOSENECK TRAILERS
7-way 90° connector molded to heavy duty 7-way insulated cable for fifth wheel or gooseneck trailer
applications. Allows remote wiring in pickup beds or other hard to access areas.
Part No.
Description
Packaging
50-97-407 90° 7-Way Molded Trailer Cord w/7 Ft. Cable
51-97-410 90° 7-Way Molded Trailer Cord w/9 Ft. Cable (GM / Ford Applications)
Bulk
Box- Bargman
6-WAY / 7-WAY TRAILER EXTENSION
• Durable connectors
• 7 ft. lead reaches almost anywhere
Part No.
Description
Packaging
118666
118664
6-Way Connector - extension cable 7’
7-Way Connector - extension cable 7’
Bagged
Bagged
7-WAY MOLDED TRAILER END CONNECTOR
REPLACEMENT KIT - RV CLOCKING*
Features self cleaning contacts, one foot of cable, butt connectors and weather resistant shrink tubing.
Part No.
Description
Packaging
54-67-525 7-Way Molded Trailer End Connector Replacement Kit w/1 Ft. Cable Bagged - Bargman
*NOTE: Reference Wiring Diagrams for pin locations.
101
TRAILER WIRING / ELECTRICAL ADAPTERS
VEHICLE/TRAILER ADAPTERS
Step-Up Style
For a quick switch from one style plug to another when towing multiple trailers.
Dual Port Vehicle/Trailer Adapters - Step - Up Style
Part No.
Description
Packaging
20144
47185
20143
4-Way Flat to 4-Way Flat and 7-Way Blade (Photo A)
Clam - Tow Ready
Clam - Hoppy
Clam - Tow Ready
4-Way Flat to 4-Way Flat and 6-Way Round (Photo B)
B
A
4, 5, 6 and 7-WAY Vehicle Adapters
Part No.
Description
Packaging
20136
V5412
118700
V5413
118702
5414
118704
V5417
118708
118703
5415
4-Flat To 5-Flat Adapter
4-Way Round Pin to 4-Flat Adapter
6-Way Round Pin To 4-Flat Adapter
Clam - Tow Ready
Clam - Peterson
Clam - Tow Ready
Clam - Peterson
Clam - Tow Ready
Bagged - Peterson
Clam - Tow Ready
Clam - Peterson
Clam - Tow Ready
Clam - Tow Ready
Bagged - Peterson
7-Way Flat Pin To 4-Flat Adapter
7-Way To 6-Way Adapter, Electric Brakes To Outer Pin (S)
7-Way To 6-Way Adapter, Electric Brakes To Center Pin (A)
7-Way To 5-Flat Adapter
118702
5414
118703
5415
118704
V5417
20136
6-WAY AND 7-WAY ELECTRICAL ADAPTERS
• Used to convert any trailer wiring component, T-One® or Taillight Converter
with a 4-Flat Trailer End Connector to a 6 or 7-Way Round Connector
• For simple mounting, choose 6 & 7-Way Mounting Box Part Numbers 118156,
118157 or 118159 (sold separately)
Part No.
Description
Packaging
20320
20321
20322
20125
4-Flat To 6-Way Round Pin Connector
4-Flat To 7-Way Flat Pin Connector - Plastic
4-Flat To 7-Way Flat Pin Connector - Metal
4-Flat To 7-Way Flat Pin U.S. Car Connector - Plastic
Clam - Tow Ready
Clam - Tow Ready
Clam - Tow Ready
Clam - Tow Ready
20321
20125
7-WAY PRE-WIRED ADAPTERS
• Used to convert any trailer wiring component, T-One® or Taillight Converter
with a 4-Flat Trailer End Connector to a 7-Way Round Connector. Each kit
includes 20’ of wire.
• For simple mounting, choose 7-Way Mounting Box Part Numbers 118156,
118157 or 118159 (sold separately)
Part No.
Description
Packaging
118799
7-Way Flat Pin Connector w/ Pre-wired Brake Wire
Clam - Tow Ready
118799
BRAKE MATE™ KIT - 7-WAY PRE-WIRED ADAPTERS
Includes all necessary parts required to completely install all brake controls.
No other parts are necessary. Each BRAKE MATE™ KIT includes:
• Pre-wired 7-way round connector • Scotch locks (5 pcs.) • 4-Flat trailer end
• Ring connectors (7 pcs.) • Heavy-Duty flasher • Self tapping screws (8 pcs.)
• Heavy-Duty breakers (2 pcs.) • Tie straps (6 pcs.)
• For simple mounting, choose 7-Way Mounting Box
Part Numbers 118156, 118157 or 118159 (sold separately)
Part No.
Description
Packaging
118607
7-Way Flat Pin Brake Mate™ Kit
Clam - Tow Ready
102
118607
TRAILER WIRING / ELECTRICAL ADAPTERS
VEHICLE / TRAILER ADAPTERS
47465
The Hopkins line of wiring adapters includes
7 RV Blade, 6 Pole Round, 5 Wire Flat and 4 Wire Flat adapters that will allow you to tow
multiple trailers without the need for rewiring trailers or vehicles.
47175
47185
47435
47565
47385
47595
PART #
Description
Truck Side
Trailer Side
Packaging
47465
47175
Multi-Tow
47185
Multi-Tow
47435
4 Pole Round to 4 Way Flat
4 Wire Flat to
6 Pole Round & 4 Way Flat
4 Wire Flat to
7 Way RV Blade Style & 4 Way Flat
6 Pole Round to
7 Way RV Blade Style
6 Pole Round to 4 Way Flat
7 Way RV Blade Style to
6 Pole Round & 4 Way Flat
7 Way RV Blade Style to
4 Way Flat & 5 Way Flat
7 Way RV Blade Style to
7 Way Round Pin
6 Pole Round Coiled Extension
4 Pole Round
4 Wire Flat
4 Way Flat
6 Pole Round
& 4 Way Flat
7 Way RV
& 4 Way Flat
7 Way RV
Clam - Hoppy
Clam - Hoppy
20143
47565
Multi-Tow
47385
Multi-Tow
47595
47055
Extension
4 Wire Flat
6 Pole Round
6 Pole Round
7 Way RV
Clam - Hoppy
Clam - Hoppy
7 Way RV
4 Way Flat
6 Pole Round
& 4 Way Flat
4 Way Flat
& 5 Way Flat
7 Way Round Pin
6 Pole Round
6 Pole Round
7 Way RV
Clam- Tow Ready
Clam - Hoppy
Clam - Hoppy
Clam - Hoppy
Clam - Hoppy
47055
TRAILER WIRING HARNESS
V5425Y
25’, split four conductor harness
Designed to split at trailer tongue and run down each side of frame
Flat four-way plug Includes trunk connector Color-coded wire meets SAE J1128 specs
Part No.
Description
Packaging
V5425Y
Split Trailer Harness - Complete Kit
Display Pack
ELECTRICAL JUNCTION BOX
5601100
Provide a fast, simplified way of connecting wires from the trailer connector to the trailer
wiring. The box, complete with 4 wire enter/exit ports, includes hardware, rubber grommets, and features external mounting flanges.
Part No.
Description
Packaging
5601100
Junction Box
Bagged
HEAVY DUTY FLASHERS & RELAYS
38659
38665
38660
39552
536/552
Part No.
Description
Packaging
39552
536/552
38659
38660
38665
Heavy-Duty 552 Flasher
Heavy-Duty Variable Load Flasher
SPDT 5 Terminal Micro Relay,12 Volt, 30 Amp, 1997-Up Ford F-150/F-250
SPDT 5 Terminal Relay,14 Volt, 20 Amp, 1999-Up Ford F-250/F-350
4 Terminal Relay, 12 Volt, 2007-Up Chevrolet Equinox, Pontiac Torrent &
Suzuki XL-7/2008-Up Ford Escape, Mazda Tribute & Mercury Mariner
Clam - Tow Ready
Bulk
Bulk
Bulk
Bagged
BLACK CONVOLUTED SLIT LOOM
05750
05751
Part No.
Description
Packaging
05750
05751
3/8” Conduit - 100 Foot Coil
1/2” Conduit - 100 Foot Coil
1 Box
1 Box
103
TRAILER WIRING COMPONENTS
CIRCUIT BREAKERS
Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any
application requiring over-current protection. Non-corrosive molded cover eliminates grounding when
operating against a fault line. Available with or without 90 degree mounting bracket.
54-115
54-215
54-730
Part No.
Description
Packaging
54-115
54-215
54-120
54-220
54-125
54-130
54-230
54-135
54-140
54-240
54-250
54-730
15 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
15 Amp Circuit Breaker, Cycling Automatic Reset - W/ Mounting Bracket
20 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
20 Amp Circuit Breaker, Cycling Automatic Reset - W/ Mounting Bracket
25 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
30 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
30 Amp Circuit Breaker, Cycling Automatic Reset - W/ Mounting Bracket
35 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
40 Amp Circuit Breaker, Cycling Automatic Reset - No Mounting Bracket
40 Amp Circuit Breaker, Cycling Automatic Reset - W/ Mounting Bracket
50 Amp Circuit Breaker, Cycling Automatic Reset - W/ Mounting Bracket
30 Amp Circuit Breaker, Blade Type Terminal - Non-Cycling - Modified Reset
Special “snap off” feature provides three lengths of .300, .500, or .750.
15 Amp Circuit Breaker, Plug in Type Blade- Terminals (Mack)
Non-Cycling - .250 inch Quick Connect Terminals Designed with an additional resistive component this style breaker remains
open as long as power is available or until the load is removed.
20 Amp Circuit Breaker, Sealed Circuit Breaker (Type I) Designed for
exposed applications (moisture, dust, oil). Supplied with 12” wire loop.
20 Amp Circuit Breaker, Sealed Circuit Breaker (Type I)
Designed for exposed applications (moisture, dust, oil).
Supplied with 12” wire loop. W/ Mounting Bracket
100 AMP - Single Rate Thermal Type Breaker
Type III Switchable Manual Surface Mount
Stud insulators are provided. Housing: Thermoset plastic:
UL rated 94VO; 3110°F 155°C. Splash Proof, Dust Proof
60 Amp Circuit, Manual Push Button Reset
90 Amp Circuit, Manual Push Button Reset
120 Amp Circuit, Manual Push Button Reset
150 Amp Circuit, Manual Push Button Reset
Bulk
54-891
54-891
54-920
54-921
54-920
54-871PL
54-871PL
52-116
52-216
18167-010
AG STYLE
SFE STYLE
GBC STYLE
ATO STYLE
MINI
MAXI
PAL
CB60PB
CB90PB
CB120PB
CB150PB
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Boxed
Bulk
Bulk
Bulk
Bulk
FUSES AND FUSE HOLDERS
Part No.
Description
Packaging
52-116
Heavy Duty 30 Amp. Fuse Holder, 12 gauge Wire
Bulk
52-216
Bulk
18167-010
AG Fuses
Heavy Duty In-Line Fuse Holder for use with 25 or 30 Amp ATO fuses Supplied
with two 4” leads of 12 gauge wire
20 Amp fuse holder with protective cover (10 pack)
All Glass - Available in 1,3,5, 7.5,10,15,20, 25 & 30 amp, and AGW 15
SFE Fuses
Glass fuses. SFE fuses available in 7.5, 9, 14, 20 & 30 amps.
5 Pack
GBC Fuses
ATO Fuses
MINI Fuses
MAXI Fuses
PAL Fuses
Ceramic type. GBC fuses available in 8 & 16 amps.
Autofuse® Blade Fuses - Available in 3, 4, 5, 7.5, 10, 15, 20, 25, 30 & 40 amps.
MINI® Blade Fuses - Available in 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30, & 40 amps.
MAXI™ Blade Fuses - Available in 20, 30, 40, 50, & 60 amps.
PAL™ Bolt-On Fuses - Available in 20, 30, 40, 50, & 60 amps.
5 Pack
5 Pack
5 Pack
Bulk
Bulk
10 Pack
5 Pack
DIELECTRIC GREASE
Using dielectric grease on electrical connectors helps prevent
corrosion and increases reliability.
11755
Part No.
Description
11755
Dielectric Grease, 2 oz. tube
104
Display Pack - Tow Ready
TRAILER WIRING COMPONENTS
PRIMARY WIRE
Single conductor copper stranded insulated primary wire for OEM and replacement in
the automotive equipment industry. Available in 8. 10, 12, 14, and 16 gauge.
Part No.
Description
Part No.
Description
02552
02550
02510
02514
02508
02509
02512
02574
02578
02572
02573
02576
02460
02464
02458
02459
02462
02461
02463
02474
02478
02472
02473
02476
02475
02477
8 Gauge - 100 ft. roll, Black
8 Gauge - 100 ft. roll, Red
10 Gauge - 100 ft. roll, Black
10 Gauge - 100 ft. roll, Blue
10 Gauge - 100 ft. roll, Red
10 Gauge - 100 ft. roll, White
10 Gauge - 100 ft. roll, Yellow
10 Gauge - 500 ft. roll, Black
10 Gauge - 500 ft. roll, Blue
10 Gauge - 500 ft. roll, Red
10 Gauge - 500 ft. roll, White
10 Gauge - 500 ft. roll, Yellow
12 Gauge - 100 ft. roll, Black
12 Gauge - 100 ft. roll, Blue
12 Gauge - 100 ft. roll, Red
12 Gauge - 100 ft. roll, White
12 Gauge - 100 ft. roll, Yellow
12 Gauge - 100 ft. roll, Green
12 Gauge - 100 ft. roll, Brown
12 Gauge - 500 ft. roll, Black
12 Gauge - 500 ft. roll, Blue
12 Gauge - 500 ft. roll, Red
12 Gauge - 500 ft. roll, White
12 Gauge - 500 ft. roll, Yellow
12 Gauge - 500 ft. roll, Green
12 Gauge - 500 ft. roll, Brown
02410
02414
02408
02409
02412
02411
02413
02424
02428
02422
02423
02426
02425
02427
02360
02364
02358
02359
02362
02361
02363
02374
02378
02372
02373
02376
02375
02377
14 Gauge - 100 ft. roll, Black
14 Gauge - 100 ft. roll, Blue
14 Gauge - 100 ft. roll, Red
14 Gauge - 100 ft. roll, White
14 Gauge - 100 ft. roll, Yellow
14 Gauge - 100 ft. roll, Green
14 Gauge - 100 ft. roll, Brown
14 Gauge - 500 ft. roll, Black
14 Gauge - 500 ft. roll, Blue
14 Gauge - 500 ft. roll, Red
14 Gauge - 500 ft. roll, White
14 Gauge - 500 ft. roll, Yellow
14 Gauge - 500 ft. roll, Green
14 Gauge - 500 ft. roll, Brown
16 Gauge - 100 ft. roll, Black
16 Gauge - 100 ft. roll, Blue
16 Gauge - 100 ft. roll, Red
16 Gauge - 100 ft. roll, White
16 Gauge - 100 ft. roll, Yellow
16 Gauge - 100 ft. roll, Green
16 Gauge - 100 ft. roll, Brown
16 Gauge - 500 ft. roll, Black
16 Gauge - 500 ft. roll, Blue
16 Gauge - 500 ft. roll, Red
16 Gauge - 500 ft. roll, White
16 Gauge - 500 ft. roll, Yellow
16 Gauge - 500 ft. roll, Green
16 Gauge - 500 ft. roll, Brown
PARALLEL PRIMARY WIRE (RIBBON WIRE)
Color coded parallel copper stranded primary wire is constructed of three or four
standard wallprimary wires bonded together side by side so that the wires are held
by a thermoplastic insulation.
Part No.
Description
02912
02913
02915
02916
16 Gauge - 3 Conductor - Green/Yellow/Brown, 100 ft. roll
16 Gauge - 3 Conductor - Green/Yellow/Brown, 500 ft. roll
16 Gauge - 4 Conductor - Green/Yellow/Brown/White, 100 ft. roll
16 Gauge - 4 Conductor - Green/Yellow/Brown/White, 500 ft. roll
DUPLEX BRAKE WIRE
Duplex brake cable is made with two insulated primary wires laid parallel and covered
with a high quality 30 mil. vinyl jacket. 12 gauge recommended for electric brakes.
Part No.
Description
03221
03212
03213
03218
03219
03206
03207
10 Gauge - 2 Conductor
12 Gauge - 2 Conductor
12 Gauge - 2 Conductor
12 Gauge - 2 Conductor
12 Gauge - 2 Conductor
14 Gauge - 2 Conductor
14 Gauge - 2 Conductor
105
100 ft. roll
100 ft. roll
500 ft. roll
100 ft. roll w/Red Vinyl Jacket
500 ft. roll w/Red Vinyl Jacket
100 ft. roll
500 ft. roll
TRAILER WIRING COMPONENTS
TRAILER WIRING CABLE
This trailer cable is made with a plastic over-all jackets. The single conductors are standard
d d copper
and color coated for identification purposes. Good resistance to abrasion, oil, grease, acid and
weather. This cable is the most durable of all.
Part No.
Description
Packaging
04900
04901
04902
04904
04905
04906
04908
04909
04914
04927
04915
16 Guage, 4 Conductor, Black/Brown/Red/White, 100 Foot Roll
16 Guage, 4 Conductor, Black/Brown/Red/White, 500 Foot Roll
16 Guage, 6 Conductor, Black/Brown/Red/Green/Blue/White, 100 Foot Roll
14 Guage, 4 Conductor, Black/Brown/Red/White, 100 Foot Roll
14 Guage, 4 Conductor, Black/Brown/Red/White, 500 Foot Roll
14 Guage, 6 Conductor, Yellow/Brown/Red/Green/Blue/White, 500 Foot Roll
14 Guage, 7 Conductor, Yellow/Brown/Red/Green/Black/Blue/White, 100 Foot Roll
14 Guage, 7 Conductor, Yellow/Brown/Red/Green/Black/Blue/White, 500 Foot Roll
12/6-10/1, 7 Conductor, Yellow/Brown/Red/Green/Black/Blue/White, 100 Foot Roll
12/6-10/1, 7 Conductor, Yellow/Brown/Red/Green/Black/Blue/White, 500 Foot Roll
14/4-10/1-12/2, 7 Conductor, Yellow/Brown/Red/Green/Black/Blue/White, 500 Foot Roll
Spool
TRAILER WIRING HARNESS
V5425Y
25’, split four conductor harness Flat four-way plug
Designed to split at trailer tongue and run down each side of frame
Includes trunk connector Color-coded wire meets SAE J1128 specs
Part No.
Description
Packaging
V5425Y
Split Trailer Harness - Complete Kit
Display Pack
TERMINALS AND CONNECTORS
05714
05715
05701
05702
05703
05704
05705
12103L
12105L
05709
Heat
Shrink
Tubing
05743
05744
05745
Part No.
Description
Packaging
05713
05714
05715
36618
36619
36620
36621
37677
05743
05743C
05744
05744C
05745
05745C
05709
05708
12103L
12105L
05705
05703
05702
05704
05701
Butt Connectors, 22-16 gauge wire, Red (100 pack)
Butt Connectors, 16-14 gauge wire, Blue (100 pack)
Butt Connectors, 12-10 gauge wire, Yellow (100 pack)
3M™ FP301 Heat Shrink Tubing 10 Pack , 3/32 in x 6 in
3M™ FP301 Heat Shrink Tubing 10 Pack , 1/8 in x 6 in
3M™ FP301 Heat Shrink Tubing 10 Pack , 3/16 in x 6 in
3M™ FP301 Heat Shrink Tubing 10 Pack , 1/4 in x 6 in
3M™ Heat Shrink Tubing FP-301, Color-Assortment Kit
Heat Shrink Butt Connectors, 22-18 gauge wire, (25 pack)
Heat Shrink Butt Connectors, 22-18 gauge wire, (100 pack)
Heat Shrink Butt Connectors, 16-14 gauge wire, (25 pack)
Heat Shrink Butt Connectors, 16-14 gauge wire, (100 pack)
Heat Shrink Butt Connectors, 12-10 gauge wire, (25 pack)
Heat Shrink Butt Connectors, 12-10 gauge wire, (100 pack)
Female “Quick Connect”, 16-14 guage wire, Yellow (100 pack)
Male “Quick Connect”, 16-14 guage wire, Yellow (100 pack)
Ring Terminal, 12-10 gauge wire, 3⁄8” stud
Ring Terminal, 10-12 gauge wire, 5⁄16” stud
Insulated Ring Terminal, 16-14 gauge wire, 3/8” stud
Insulated Ring Terminal, 12-10 gauge wire, #10 stud (3⁄16”)
Insulated Ring Terminal, 16-14 gauge wire, 1⁄4” stud
Insulated Ring Terminal, 12-10 gauge wire, 1⁄4” stud
Insulated Ring Terminal, 16-14 gauge wire, #10 stud (3⁄16”)
100 Pack
100 Pack
100 Pack
10 Pack
10 Pack
10 Pack
10 Pack
10 Pack
25 Pack
100 Pack
25 Pack
100 Pack
25 Pack
100 Pack
100 Pack
100 Pack
50 Pack
50 Pack
100 Pack
50 Pack
100 Pack
50 Pack
100 Pack
CABLE (ZIP) TIES
Part No.
Description
Packaging
05724
05725
05726
05727
5 inch Black Ties (100 pack)
7 inch Black Ties (100 pack)
11 inch Black Ties (100 pack)
14 inch Black Ties (100 pack)
100 Pack
100 Pack
100 Pack
100 Pack
106
Spool
Spool
Spool
Spool
Spool
Spool
WIRING COMPONENTS / SWITCHES / ALARMS
SWITCHES
Since 1909 Pollak™ has developed, manufactured, and supplied a wide variety of electro-mechanical products including Toggle Switches, Door Switches, Ignition Switches,
Back-Up Alarms, and related items for the Truck, Off-Road, RV, and Towing Industries
34-212
34-213
34-576
Part No.
Description
Packaging
34-212
50 Amps, 6-24 Volt Toggle Switch
Circuitry - On-Off Terminals - 2, Voltage - 50 VDC, Handle Length - 1”
Same as 34-212 with 1-1/2” bat handle
20Amps @ 12 VDC Toggle Switch
Circuit: DPDT ON - ON, Positions: 2, Termination: 6 Screw,
Mounting: 15/32” Dia. Bushing.
75 Amp at 6-28 Volts (D.C) Push-Pull Switch
2 Position, S.P.S.T Off-On. Heavy Duty Die-Cast Body, Chrome Plated, Knob,
Copper Terminals, Mounting Stem 5/8” Long, 15/32” Dia.
Marine- Push-Pull Switch
3 Position- Off- On- Both On For Controlling Running Lights, etc. Large 3/4” Dia.
Face Nut. Mounting Stem 1-1/4” Long 7/16” Dia.
Marine Starter Switch
Magneto grounded in “off” position glass filled delrin housing, stainless steel terminals, moulded velox base.13/16” diameter mounting bushing special weather
proofing seal and drain hole. Furnished with terminal Hardware, Mounting Nuts
and two keys.
Ignition Starter Switch
4 Position Switch with Momentary Start and Universal Type Die-Cast Housing
Ignition Starter Switch
3 Position Switch with Momentary Start and Universal Type Die-Cast Housing
Battery Master Disconnect Switch with Faceplate
Single pole battery disconnect, two position (on & off) 12V DC, 20A continuous
125A intermittent 15 sec. on, 5 min. off. Two 3/8” copper terminal studs.
Brass mounting stem 3/4”-16 THD., 23/32” long, fits through 3/16” panel
Bulk
34-213
34-576
35-306
33-403
33-403
35-306
33-105
33-105
31-103
33-103
31-253
31-253
SW700
SW700
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Boxed
DOOR SWITCHES
Part No.
Description
Packaging
52-620
Door Plunger Switch
For most Ford and Chrysler products, 14V at 10 Amps, Lamp Load Overall length
2-1/8”, Plunger travel 3/16”, Self tapping thread. Self-Adjusting
Mating Connector For 52-620 Switch. Three 8” 18 gauge wire leads.
Bulk
52-620
52-622
Bulk
BACKUP / BODY-UP SWITCHES
BACKUP ALARMS
52-622
41-706
Part No.
Description
Packaging
41-706
8 DC Amp Back-Up Alarm Switch
For vehicles not equipped with automatic back-up light circuit.
Mounts adjacent to reverse shift. Spring loaded lever - Springs to Off
Mechanical Body-Up Switch - Multi-Use Stoplight-Mechanical Switch
Spring loaded lever - Springs to On
Back Up Alarm, 97 dB
12-24 VDC. Low frequency tone. Epoxy sealed from moisture, dust and vibration.
Self-grounding. 4” L x 1-5/8” W x 2-5/8” T
Heavy-Duty Back-Up Alarm, 107 dB
A Medium to Heavy Duty unit for off-highway trucks, dump trucks, loaders, etc.
Size - 5”W x 4.7”D x 3.1”H
Mounting - 2” x 4.25” centers
Operates in temperature ranges (-40 F to 170 F)
Body Up Indicator Kit
Kit Includes: Weather Tight Switch, 20’ Wiring Harness, Packard Weatherproof
Connectors, Body and Chassis Mounting Brackets, Red Indicator Light
Body Up Indicator Kit with Buzzer Light
Kit Includes: Weather Tight Switch, 20’ Wiring Harness, Packard Weatherproof
Connectors, Body and Chassis Mounting Brackets, Red Indicator Buzzer Light
Replacement plunger switch w/ Packard connector
Used in SK10 and SK12 Body Up Indicator Kits
Body Up Indicator Kit Pre-Wired, 15 Amp
Bulk
52-602
52-602
BA0972
BA0972
41-851
41-851
SK10
B90
SK12
SK10
SK12
B90
B95W
107
Bulk
Display
Boxed
Boxed
Display
Boxed
Display
Boxed
Boxed
Boxed
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement