Quick Start Guide DSB-100 Portable Premium Bluetooth Speaker

Quick Start Guide DSB-100 Portable Premium Bluetooth Speaker
DSB-100
Portable Premium
Bluetooth Speaker
Quick Start Guide
DSB-100EM_QSG_141023.indd
1
2014/10/23
13:14:04
1.Unpacking the speaker
Carefully unpack your new Envaya Mini speaker and verify
that you have the following items.
2.Charging the speaker
qOpen the cap on the left side.
wConnect the small end of USB cable to the speaker.
eConnect the large end of the USB cable to a USB to AC
power adapter and a power source or the USB port on
your computer.
w
Green: 70 – 100%
Orange: 30 – 69%
Red:
1 – 29%
q
e
NOTE
NOTE
USB to AC power adapter not included.
• The rating of adapter should be less than DC 5 V, 2.4 A.
• Must be used with an approved adapter suitable for the countries where
the requirement will be applied.
1
DSB-100EM_QSG_141023.indd
1
2014/10/23
13:14:04
qActivate the Bluetooth settings on you mobile device.
wSelect “Envaya Mini” from the list of available Bluetooth
devices. In a few seconds you will hear a fast 3 note
tone from the speaker indicating that it is connected
to your device. The status indicator stops blinking and
remains illuminated.
4.Pairing additional Bluetooth Devices
qActivate the Bluetooth settings on you mobile device.
wPress and hold the 1/3 button for 3 seconds until you
hear a 3 tone beep.
eSelect “Envaya Mini” from the list of available Bluetooth
devices. In a few seconds you will hear a fast 3 note
tone from the speaker indicating that it is connected
to your device. The status indicator stops blinking and
remains illuminated.
ENGLISH
3.Playing Music from your Bluetooth Device
(Pairing and Connecting)
Env
ay
a
En
va
ya
Status indicator
DSB-100EM_QSG_141224.indd
2
2
2014/12/25
14:31:57
5. Using the Speakerphone
Answering Calls: Press the 1/3 button on the right side
of the speaker.
Ending Calls: Press the 1/3 button again.
To view the complete user manual, please visit
manuals.denon.com/DSB100/ALL/EN/
or scan the QR code below using your smartphone.
Microphone
3
DSB-100EM_QSG_141224.indd
3
2014/12/25
14:31:58
Speaker does not turn on
•To turn on the speaker, press and hold the power button for 2 seconds.
Cannot pair a Bluetooth device with the speaker
•Power On the speaker then press and hold the 1/3 button for 3 seconds until you hear a 3 tone beep. Make sure your
mobile device has Bluetooth On and select “Envaya Mini” from the list of Bluetooth devices.
Speaker is turning off automatically
•To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for approximately 15
minutes.
Speaker is malfunctioning
•To reset the speaker, turn on the speaker then, press and release the POWER button, 1/3 button and BATTERY button
simultaneously. Envaya Mini is reset.
Cannot conduct a call
•Hands-free phone calls cannot be conducted when a cable is connected to the AUX input. Remove the cable and try
again.
•Not all mobile phones and Apps support Hands-free phone calling.
4
DSB-100EM_QSG_141023.indd
4
2014/10/23
ENGLISH
Basic Troubleshooting
13:14:05
www.denon.com
DSB-100EM_QSG_141224.indd
7
D&M Holdings Inc.
Printed in China 5411 11253 10AD
2014/12/25
14:32:07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement