MS model PARAMETER GENERATOR INSTRUCTION MANUAL

MS model PARAMETER GENERATOR INSTRUCTION  MANUAL
INSTRUCTION MANUAL
model
PARAMETER GENERATOR
Thank you for choosing M-System. Before use, check specifications
on the unit label.
If you have any problems or questions with the product, please contact
M-System’s Sales Office or representatives.
MS
Front Panel Functions
•Standard
General Description
+
The M-UNIT Model MS outputs a setpoint value within a specific DC
range.
• Monitor terminals provided for accurate adjustment
–
Monitor
Setpoint Adj.
Installation [Scale: mm(inch)]
Front Cover (open)
• Operating temperature: -5 to +60°C (23 to 140°F)
• Operating humidity: 30 to 90% RH (non-condensing)
Keep away from water, corrosive gas, dust and vibration. Wall or DIN
rail mounting available.
•Setpoint Monitor (standard type): 0 – 10V DC is output proportional
to the setpoint 0 – 100%. (example: Turn the setpoint adjustment until
the monitor shows 5V DC when you need 12mA with 4 – 20mA DC
output range.)
•Option/E: LCD meter
40 ± 0.2
(1.57± .01)
2–M4 SCREW
LCD Meter
Setpoint Adj.
When mounting, no extra space is needed between units.
Front Cover (open)
Terminal Connections
Make wiring to terminals as shown in the figure below. Use the socket
provided with the module.
1 +
OUTPUT
2 –
7 U(+)
POWER
8 V(–)
Troubleshooting
When output is irregular, check the following points:
A) Terminal wiring
B) Power wiring and polarity
C) Output: With current output, be sure that load resistance is within
the permissible limit including wiring resistance. With voltage
output, check that the minimum load is met.
M-SYSTEM WARRANTY
M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such product
was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System's sole liability, and purchaser's exclusive remedies, under this
warranty are, at M-System's option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this warranty. To submit a claim under
this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original sales invoice.
THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL
DAMAGES OF ANY KIND WHATSOEVER.
M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: [email protected]
EM-1651 Rev.6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement