- Computers & electronics
- Cameras & camcorders
- Camera accessories
- Underwater camera housings
- Ikelite
- Universal Fiber Optic Mount Kit
- Instruction manual
Ikelite Universal Fiber Optic Mount Kit Instruction manual
Add to my manuals2 Pages
Ikelite Universal Fiber Optic Mount Kit
The Ikelite Universal Fiber Optic Mount Kit is a versatile accessory that allows you to add fiber optic ports to almost any existing underwater camera housing. This mount is designed to provide an easy and secure way to attach fiber optic cords to your housing, enabling you to trigger external strobes or flashes for improved lighting in underwater photography.
With its universal design, the Ikelite Universal Fiber Optic Mount Kit is compatible with a wide range of fiber optic cords from various manufacturers, including Ikelite, Sea&Sea, INON, Olympus, Nauticam, and more. It features two circular port openings, allowing you to connect up to two fiber optic cords simultaneously.
advertisement
4402 Universal Fiber Optic Mount
Contents
Velcro with adhesive backing Universal Fiber Optic Mount
Thank you for your purchase of Ikelite equipment. Please read these instructions completely before attempting to operate or dive with this product.
This Mount provides an easy way to add fiber optic ports to almost any existing housing. Simply cut to size and adhere to the top of the housing above the camera's built-in flash. Provides two ports for the attachment of one or two fiber optic cords. For best results, use in conjunction with your housing's flash deflector to avoid backscatter.
Diagram A Diagram B
Port Mount
Velcro
Fiber Optic Cord
Adhesive
Backing
Cut away excess Velcro that may interfere with camera controls or functions BEFORE attaching to camera housing
Attaching Universal Fiber Optic Mount to a Housing
1. Insert one end of a compatible fiber optic cord into one of the two circular port openings in the
Mount on the velcro side. Insert the other end of the compatible fiber optic cord into the functioning strobe that you intend to trigger.
2. Hold the Mount over the housing where you intend to attach it. Choose an area that will allow good adhesion and allow the Fiber Optic Cord to easily see the camera flash.
3. With the camera inside the housing, fire the camera flash several times to make sure the strobe is properly triggered. A properly charged strobe will fire along with each camera flash.
4. Remove the fiber optic cord from the Mount. Using scissors, trim any excess Velcro material from the Mount which could interfere with housing controls or functions. Note: Only trim what is necessary to assure good adhesion to the housing - Diagram A.
Attaching Ports Mount to a Housing (continued)
5. Remove the adhesive backing from the Velcro and attach the Mount to the housing area determined in step 2 - Diagram B.
6. Re-attach fiber optic cord and test fire strobe.
Compatible Fiber Optic Cords
Ikelite 4501 Fiber Optic Coiled Cord
INON Optical D Cable "Non-wireless type" L-Connector
Sea&Sea Fiber Optic Cable (L-type) Product No. 50107
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable No. 26211 Nauticam to INON
Nauticam Optical Fiber Cable No. 26212 Nauticam to Sea&Sea
Customer Support
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: [email protected]
Phone: 317-923-4523
Limited Warranty
This Ikelite product is warranted against any manufacturing defects for a period of one (1) year from the original date of purchase. Defective products should be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid. All other claims of any nature are not covered. Except as mentioned above, no other warranty expressed or implied applies to this Ikelite product.
Returning Products for Service
Evidence of purchase date must be provided to obtain warranty service.
No prior authorization is required. You may return directly to us or through your dealer.
Please include a brief description of the problem, any relevant email correspondence, and/or instructions. Always include name, shipping address, email address, and phone number inside of the package. Send postage paid to:
Ikelite Underwater Systems
Attention: Service Department
50 West 33 Street
Indianapolis, IN 46208 USA
No reimbursements for postage paid will be issued.
Note: Ikelite does not repair this item. A 4402 Mount sent in for service that is found to be defective will be replaced.
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA www.ikelite.com
© 2013 Ikelite Underwater Systems
Universal Mount Optical Port Kit_01-0813
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project