Avtec Eco Arch UV Spec Sheet Model EA2000 4000UV

Avtec Eco Arch UV Spec Sheet Model EA2000 4000UV
Low Volume Exhaust
Ultra Violet
Canopy for Use
Over 400°F & 600°F
Cooking Equipment
EcoArch Energy Efficient Ventilation UV with model EA2000/4000 UV
™
Description:
model EA2000UV shown
The Avtec UV air cleaning system is ETL Listed to UL and ETL
standards and is designed for use in the Avtec EA 2000 and EA
4000 model exhaust canopies. The system is intended to break
down grease molecules, oxidize grease vapors, and reduce
grease odors in exhausted air. It is intended for reduced duct
cleaning and decreased fire risk in kitchen ductwork.
Specifications:
Provide Avtec UV air cleaning system, ETL Listed, with single 150 W quartz UV lamp, and UV “light on” view port with UV filter.
Unit to be designed with Avtec model EA 2000/4000 and be easily accessible through the front face of the exhaust canopy for ease of cleaning
and bulb replacement.
Avtec UV air cleaning system, to utilize both 185 and 254nm UV light to break down long-chain grease molecules and produce low levels of
ozone to oxidize grease vapors. Bulb to be single, rugged, 150 W UVc lamp with 12,000 hour life span.
Unit complete with control switch and interlocks for fan, door and cartridge lock-outs.
Standard Features:
• UV “on” viewing port with UV screen
• Locking access door for controlled access to UV bulb
• On/off switch with safety interlocks
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Avtec EcoArch Ventilation UV, page 1
PP SPECUVEA Rev. C
Updated 09/11
Ultraviolet Air Cleaning System
Length
4’-0”
5’-0”
6’-0”
7’-0”
8’-0”
9’-0”
10’-0”
11’-0”
12’-0”
13’-0
14’-0”
15’-0”
16’-0”
Light Duty 400ºF Cooking Equipment
Exhaust CFM
Single Collar
CFM @
Duct
.875 SP
Collar
560
8x6
700
8x8
840
8 x 10
980
8 x 10
1120
8 x 12
1260
8 x 14
1400
8 x 16
1540
8 x 18
1680
8 x 18
1820
8 x 20
1960
8 x 22
2100
8 x 24
2240
8 x 26
Double Collar
CFM @
Duct
. 875” SP
Collar
560
8x6
700
8x8
840
8 x 10
980
8 x 10
1120
8 x 12
1125
(2) 8 x 6
1250
(2) 8 x 8
1375
(2) 8 x 8
1500
(2) 8 x 8
1625
(2) 8 x 10
1750
(2) 8 x 10
1875
(2) 8 x 10
2000
(2) 8 x 12
Medium and Heavy Duty 600ºF Cooking Equipment Exhaust CFM
Single Collar
CFM @
Duct
1.125” SP
Collar
720
8x8
900
8 x 10
1080
8 x 12
1260
8 x 14
1440
8 x 16
1620
8 x 18
1800
8 x 20
1980
8 x 22
2160
8 x 24
2340
8 x 26
2520
10 x 22
2700
10 x 24
2880
10 x 26
Double Collar
CFM @
Duct
1.125” SP
Collar
720
8x8
900
8 x 10
1080
8 x 12
1260
8 x 14
1440
8 x 16
1485
(2) 8 x 8
1650
(2) 8 x 8
1815
(2) 8 x 10
1980
(2) 8 x 12
2145
(2) 8 x 12
2310
(2) 8 x 12
2475
(2) 8 x 14
2640
(2) 8 x 14
Note: Depending on building conditions greater exhaust air flow rates may be required for each specific installation in order to obtain complete vapor and
smoke removal. UL710 Listing information is available upon request.
Note: Exhaust collar sizing is based on an average range of 1600 FPM. Duct collars are located on centerline of canopy, unless otherwise specified.
Hoods with Double exhaust collar are located on ¼ lines of canopy unless otherwise specified. Canopy is to have a minimum 6” overhang on all exposed
sides of cooking equipment.
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2011 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement