User manual | 18SP662

18SP662 –
EPA07 Series 60® Remote-mounted
Breather System Installation
DESCRIPTION
The remote-mounted breather system is an emission-controlled device and must be
installed properly to ensure EPA compliance and safe operation. Improper installation
can cause oil discharge (or oil pullover and air system fouling for closed systems only),
freezing, excessive crankcase pressure, and/or reduced useful life of breather.
INSTALLATION PROCEDURE
When installing the remote-mounted breather assembly, refer to Freightliner drawing
D01-31409 for the correct installation and line routing for the crankcase
breather assembly.
NOTICE:
Failure to follow the guidelines can result in unsatisfactory results including higher
emission levels and possible engine damage.
Specifications are subject to change without notice. Detroit Diesel Corporation is registered to ISO 9001:2001.
Copyright © 2008 Detroit Diesel Corporation. All rights reserved. Detroit Diesel Corporation is a Daimler company.
18SP662 0810 As technical advances continue, specifications will change. Printed in U.S.A.
18SP662 Page 1 of 1

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project