WDL-1900PVM - Operating Manual

WDL-1900PVM - Operating Manual
WDL-1900PVM / WDL-1900PVM-HD
Table of Contents
1. Table of Contents
2
2. Precautions
3
3. Warnings
4
4. Function
A. Front side of monitor
6
B. Back side of monitor
7
C. Explanation on remote control
8
5. System Wiring
9
6. Operation
A. Picture
10
B. Source
10
C. OSD
11
D. Setup
11
E. Screen
11
F. Terms
12
G. Check before asking warranty service
13
8. Packing List
14
9. Specifications
15
10. 19” PVM 600 Line Camera
16
11. 19” HD Camera
17
Before operating the set, please read this manual carefully
2. Table of Contents
WDL-1900PVM / WDL-1900PVM-HD
Precautions
Do not remove the cover.
To reduce the risk of electric shock and maintain the quality of the product,
please do not remove the cover.
Please follow the instructions of the wiring diagram in the Installation Guide.
Keep small articles out of the reach of children.
Store small articles (screws, etc.) in places not accessible to children.
If swallowed, consult physician immediately.
Stop using immediately if a problem appears.
When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious smoke being
emitted from the unit, or foreign objects dropped inside the unit.
Do not use this equipment outside the vehicle.
Do not use this equipment for purposes other than those listed for the vehicle.
Failure to do so may result in an electric shock or an injury.
Stop the vehicle before carrying out any operation that could interfere
with your driving.
If the operation of the unit(such as turning on or turning off the monitor, etc.)
interferes with your driving, stop the vehicle in a safe location before
attempting operation.
Temperature
Before turning your unit on, be sure the temperature inside the vehicle is
between -15 (+5 ) and +60 (+140 )
Maintenance
If you have problems, do not attempt to repair the unit by yourself. Return it to
your purchasing dealer.
Precautions. 3
WDL-1900PVM / WDL-1900PVM-HD
Warnings
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce the risk of electric shock do not remove cover(or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of "dangerous voltage" within a
product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING
To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub or
strike the Active Matrix LCD with anything hard, as this may scratch, mar, or damage the
Active Matrix LCD permanently.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try or correct the interference by one or
more of the following measures.
4. Warnings
WDL-1900PVM / WDL-1900PVM-HD
CAUTION
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.
POWER
This set operates on DC power. The voltage is as indicated on the label on the back
cover. Never apply AC power to the set directly. Do not allow anything to rest upon or
roll over the power cord, and do not place the set where the power cord is subject to
damage.
SERVICE
Never remove the back cover of the monitor, as this can expose you to high voltage and
other hazards. If the monitor does not operate properly, unplug it and call your dealer.
LOCATION
Position your monitor where no bright light or sunlight will shine directly on the screen.
Also ensure that the monitor is placed in a position that allows a free flow of air. Do not
cover the ventilation openings on the back cover.
CLEANING
Unplug the monitor before cleaning the face of the LCD Screen. Dust the monitor by
wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional
cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners.
Warnings. 5
WDL-1900PVM / WDL-1900PVM-HD
Function
A. Front side of monitor.
It is an explanation of the name and function per each part.
WDL-1900PVM
WDL-1900PVM-HD
1. LCD PANEL
It supports a resolution 1280x1024
2. REMOTE CONTROL SENSOR
IR-SENSOR is built in so that you can use remote control.
3. MENU
Display a main menu on screen.
4. DOWN
Press to use select items in the on-screen menu.
5. DECREASE/INCREASE CHANNEL OR VOLUME
6. SOURCE
TURN DOWN A CHANGE OF SCREEN
Change a mode to VIDEO1 / PC / HDMI (HDMI - option)
7. POWER BUTTON
Turn ON/OFF power of monitor.
8. LED
Illuminates brightly when the monitor is switched on. (Power standby indicator)
6. Function
WDL-1900PVM / WDL-1900PVM-HD
B. Back side of monitor.
It is an explanation of the name and function per each part.
DC-12V
HDMI
D-SUB
VIDEO-1
AUDIO
LEFT
AUDIO
RIGHT
PC SOUND
IN
PC SOUND
OUT
LOOP OUT
(VIDEO-2)
1. DC-12V (Power input port)
It is a connection for power.(Use the adapter supplied)
2. HDMI (HDMI input port - option)
Uses of HDMI cable to connect a HDMI output port.
*HDMI cable(Optional)
3. D-SUB (RGB input port)
Uses of D-SUB signal cable to connect PC D-SUB.
4. VIDEO-1 (External video input port)
WDL-1900PVM-HD:CVBS video input, WDL-1900PVM Camera input port
5. AUDIO LEFT (External audio input port)
External sound ouput port using RCA cable (WHITE)
6. AUDIO RIGHT(External audio input port)
External sound ouput port using RCA cable (RED)
7. PC SOUND IN (Speaker input port - PC)
Connect external speaker using audio cable
8. PC SOUND OUT (Speaker output port - PC)
Connect external sound output using PC audio
9. LOOP OUT (Video-1 output port)
WDL-1900PVM : Video-1 image loopout (at display the PVM Camera image)
WDL-1900PVM-HD :CVBS image loopout (at display the PVM Camera image)
Function. 7
WDL-1900PVM / WDL-1900PVM-HD
C. Explanation of remote control.
The button and function of remote control.
1
2
3
6
4
5
7
8
9
10
8
12
11
13
14
15
16
17
19
18
8. Operation
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
Turn on/off power of LCD monitor
Make sound of speaker be mute
Change to VIDEO 1 mode
Change to VIDEO 2 (option)
Change to PC mode
Change to HDMI mode
Dimmer control button
Press to display all of the available
Source
video source
Present display mode
Display
MENU becomes off
Exit
,
UP/DOWN during the menu
Display screen adjusting menu on screen
Menu
UP/DOWN mute or turn up/down sound
VOL ,
HOTKEY on the remote control
OSD
Brightness Adjust the brightness of screen
Adjust the contrast of screen
Contrast
Adjust the HUE of screen
HUE
Auto Power The power of LCD stays ON or OFF
Return to initial set mode
RESET
Power
Mute
VIDEO 1
VIDEO 2
PC
HDMI
Dimmer
WDL-1900PVM / WDL-1900PVM-HD
System Wiring
It is an explanation how to connect to monitor.
- Caution: Turn off power before connecting PC and other
equipments and connect to monitor.
- Input Power consumption should be 220V or 110V
for AC/DC Adapter
- Use after plugging in outlet. (Connect to POWER)
DC-12V
HDMI
D-SUB
VIDEO-1
AUDIO
LEFT
AUDIO
RIGHT
PC SOUND
IN
PC SOUND
OUT
LOOP OUT
(VIDEO-2)
LOOP OUT
Adapter
To Wall Outlet
Computer
SPEAKER
AUDIO OUT
RGB Out
* HDHI Port : Used PVM Camera
VIDEO -1 Port : Used PVM Camera
System Wiring. 9
WDL-1900PVM / WDL-1900PVM-HD
Operation
OSD screen configuration and adjustment buttons
- Press "MENU" button to activate OSD menu screen.
- OSD is changed consequently as below when press menu continuously.
PICTURE or PC
OSD
SOURCE / SETUP
- Press menu key 1~2 second to exit menu or press source button. (EXIT on remote control)
A. PICTURE (VIDEO1, VIDEO2 Only)
P I C T U R E
CONTRAST
CONTRAST
Select "CONTRAST" function from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired contrast from the display.
BRIGHTNESS
Select "BRIGHTNESS" function from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired brightness from the display.
BRIGHTNESS
HUE
HUE
SATURATION
SHARPNESS
COLOR TEMP
MOVE
SATURATION
Select "SATURATION" function from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired saturation from the display.
SHARPNESS
Select "SHARPNESS" function from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired sharpness from the display.
COLOR TEMP
PICTURE MODE
Toggling "COLOR TEMP" on the screen to adjust [NORMAL - WARM - COOL]
NORMAL
PICTURE MODE
STANDARD
ADJUST
EXIT
Select "HUE" function from the OSD picture menu.
Press DECREASE/INCREASE button to select a desired hue from the display.
Toggling "PICTURE MODE" on the screen to adjust [STANDARD - MOVIE - VIVID]
B. PC (PC & HDMI Only)
P C
CONTRAST
BRIGHTNESS
H. POSITION
V. POSITION
Select "CONTRAST" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired contrast for the display.
BRIGHTNESS
Select "BRIGHTNESS" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired brightness for the display.
H. POSITION
Select "H. POSITION" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired horizontal position for the display.
(PC mode only)
CLOCK
V. POSITION
PHASE
(PC mode only)
COLOR MODE
CLOCK
AUTO ADJUST
MOVE
CONTRAST
ADJUST
(PC mode only)
EXIT
PHASE
(PC mode only)
Select "CLOCK" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired clock for the display.
Select "PHASE" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired phase for the display.
COLOR MODE
Toggling "COLOR MODE" on the screen to adjust [NORMAL - WARM - COOL]
AUTO ADJUST
Select "AUTO ADJUST" function from the PC menu.
DECREASE/INCREASE to play.
(PC mode only)
10. Operation
Select "V. POSITION" function from the OSD pc menu.
Press DECREASE/INCREASE button to adjust a desired vertical position for the display.
WDL-1900PVM / WDL-1900PVM-HD
C. OSD
O S D
LANGUAGE
ENGLISH
H. POSITION
V. POSITION
OSD TIMER
LANGUAGE
Toggling "LANGUAGE" on the screen to select.
[ ENGLISH - DEUTSCH - FRANCAIS - ITALIANO - ESPAAOL - DUTCH ]
H. POSITION
Select "H. POSITION" function from the OSD osd menu.
Press DECREASE/INCREASE button to adjust a desired OSD horizontal position for the OSD display.
V. POSITION
Select "V. POSITION" function from the OSD osd menu.
Press DECREASE/INCREASE button to adjust a desired OSD vertical position for the OSD display.
OSD TIMER
Select "OSD TIMER" function from the OSD menu
to DECREASE/INCREASE the time from 5 to 60 second.
TRANSPARENT
Select "TRANSPARENT" function from the OSD menu
to DECREASE/INCREASE transparency.
INFORMATION
Select "INFORMATION" function from the OSD menu.
Display (NTSC/PAL) and PROGRAM VERSION on the screen.
RECALL
Select "RECALL" function from the OSD menu.
Default SETTING datas.
TRANSPARENT
INFORMATION
RECALL
MOVE
ADJUST
EXIT
D. SOURCE/ SETUP
Press DECREASE/ INCREASE buttons to ON/ OFF at the mode.
SOURCE / SETUP
VIDEO1
ON
PC
ON
HDMI
ON
MOVE
ADJUST
Ex )
VIDEO1
ON
PC
ON
HDMI
OFF
EXIT
AUTO POWER
Set up automatically “Power ON” until it’s Power Off and On again.
Operation. 11
WDL-1900PVM / WDL-1900PVM-HD
F. Terms
TFT LCD (Thin Film Transistor LCD)
Is a thin film transistor LCD and is a type of LCD, a display element that uses optical switch
controlling the transmission of light by changing the arrangement of liquid crystal. Active
matrix type of flat plate display operates the liquid crystal by integrating TFT(thin film
transistor), an active switching element to each pixel of existing simple type LCD, and is
emerged as a powerful CRT substitute in PC areas including TV since it has excellent
resolution.
Resolution
Refers to precision level of device that displays graphics including graphic screen, TV
camera and plotter. In general, resolution of screen is determined by the number of pixels
at the horizontal points and vertical points forming the screen. The bigger the resolution of
screen is, the more it can display information and easier it can perform several tasks at the
same time.
Horizontal frequency
Number of horizontal frequencies that can be displayed for 1 second is called horizontal
frequency. The unit is Khz
Vertical frequency
Frequency of displaying the screen repetitively for 1 second is called vertical frequency.
The unit is Hz.
Pixel
Graphic screen can be separated into the row and column of small points and this small
point is called "Pixel". It is the smallest unit of screen that can be saved, displayed and
addressed.
Pixel pitch
Minimum diameter of LCD display is called "Pixel pitch".
For your reference, the distance between each pixel in CRT monitor is expressed as "DOT
Pitch".
OSD (On Screen Display)
When the user press the adjustment button to adjust the monitor screen status while data
is displayed in the screen, this function appears in the graphic form in the screen so that
the user can easily adjust it.
Plug and Play
This function is to automatically and easily adjust new hardware without separate
installation process.
12. Operation
WDL-1900PVM / WDL-1900PVM-HD
G. Check before asking warranty service
Q: Power doesn't come out.
A: Connect power cord correctly and press power switch.
Q: Screen doesn't come out.
A: Check that monitor of signal cable(D-Sub) is connected correctly.
Q: LED of monitor is blinking.
A: Check that monitor of signal cable(D-Sub) is connected correctly.
Q: The size and position of screen is not normal.
A: Activate auto on screen display.
Q: Screen is too bright or dark.
A: Adjust brightness or contrast on screen display.
Q: The letter on screen is not clear and noise comes out.
A: Make it be optimal by adjusting "Phase" on display adjust.
Q: Screen doesn't come out clearly.
A: Adjust vertical frequency in registration information of system display.
If the symptom happen continuously, adjust by changing video card.
Q: No signal is shown up.
A: Check signal cable(D-Sub) of monitor(S-Sub) and the condition of damage.
Q: An image is turned up, but sound doesn't come out.
A: Check program from other broadcast and press volume up button.
Q: Screen of whole channel or special channel is overlapped.
A: Adjust the position and direction of antenna.
Q: Sound doesn't come out from speaker.
A: Check that audio cable is connected with audio in port of monitor and sound card
speaker of PC.
Q: Screen doesn't turn up after changing to our monitor from previous one.
A: Install new monitor(ours) after changing to frequency supported by out monitor on
registration information of window display from previous one.
Operation. 13
WDL-1900PVM / WDL-1900PVM-HD
Packing List
Set [TFT-LCD Monitor]
AAA
AAA
Remote Controller
2 Batteries for Remote Controller
Owner's Manual
Adpater
Power Cord
D-SUB Signal Cable
Audio Cable(Option)
HDMI(Option)
RCA Cable(Option)
14. Packing List
WDL-1900PVM / WDL-1900PVM-HD
Specifications
DESCRIPTION
DISPLAY TYPE(LCD TYPE)
SCREEN SIZE(inch)
VIEWABLE SIZE
VIEWING ANGLE WDL-1900M
PIXEL PITCH(mm)
WALL MOUNTING
BRIGHTNESS
RESOLUTION
DISPLAY COLOR
PIXEL FORMAT
INTERFACE
VIDEO INPUT
CONTRAST RATIO
AC/DC ADAPTOR
BULT-IN SPEAKERS
PLUG&PLAY LEVEL
I/O CONNECTOR
OPTION
SYSTEM TYPE
POWER REQUIREMENTS
RESPONSE TIME
WEIGHT(NET)
SIZE (Width x Depth x Height)
WDL-1900PVM / WDL-1900PVM-HD
ACTIVE MATRIX COLOR TFT LCD
19” (Diagonal)
376.32 mm x 301.06 mm
TOP 80 C/ BOTTOM 80 C/ LEFT 80 C/ RIGHT 80 C(CR 10)
0.294 (H) x 0.294 (V)
YES
250 cd/m
2
SXGA (1280x1024)
16.2M Colors
RGB VERTICAL STRIPE
DIGITAL
ANALOG R.G.B(0.7Vp-p), COMPOSITE(0.7Vp-p)
1000:1
AC 100-240, 60/50Hz, DC12V/4.16A
WITH SPEAKER (2W x 2 Stereo)
VESA DDC 1/2B
DC POWER IN (DC12V)
AUDIO_L/R IN & SPEAKER OUT & SPEAKER IN
VGA 15 PIN D-SUB
VIDEO 1 , HDHI (Option)
Touch Screen
NTSC / PAL / SECAM / AUTO
48W, SANING MODE :5W
5 msec
17.6Ibs
441.32mm x 428 mm x 60 mm
Specifications. 15
WDL-1900PVM / WDL-1900PVM-HD
19” PVM 600 Line Camera
100mm
424mm
46mm
55mm
LCD
CAMERA
MECA
SCREEN SIZE
RESOLUTION
LCD FROFILE RATIO
DISPLAY COLOR
BRIGHTNESS
CONTRAST RATIO
VIEWING ANGLE
VIDEO OUTPUT
POWER REQUIREMENT
SO U N D
REMOTE CONTROL
K EY
IMAGE SENSOR
RESOLUTION
EFFECTIVE PIXELS
SCANNING SYSTEM
S/ N R A T IO
SYNC SYSTEM
SCANNING FREQUENCY
MINIMUM ILLUMINATION
SHUTTER SPEED
WHITE BALANCE
L EN S
B R A C K ET
19"
1280 X 1024
4:3
16.7M ( 8BIT )
250 NIT
1000 : 1
160° / 160°
BNC LOOP OUT
DC 12V
OK
P O W ER K EY O N L Y
1/3 Inch SONY Super HAD ll CCD
600 TV Lines
768 (H) x 494 (V)
2:1 Interlace
4 8 d B (A G C O f f )
Internal
15.734 KHz (H), 59.94 Hz (V)
0.2 Lux / F1. 2 (Color), 0.01 Lux / F1.2 (B&W)
1/60 ~ 1/100,000 sec.
62dB (Max.)
6 m m Fi x e d B o a r d L e n s
V ES A 1 0 0 m m
Specifications. 16
WDL-1900PVM / WDL-1900PVM-HD
WDL-1900PVM-HD CAMERA SPECIFICATION
100mm
424mm
46mm
55mm
Imaging Sensor
Scanning System
Number of active pixel
Total number of pixels
S/N Ratio
Electronic Shutter Speed
PVM
Minimum Illumination
SYNC. System
Backlight Compensation
Day & Night Function
IRIS MODE
ACCE (Adaptive Color&Contrasr Enhancement)
2D / 3D - NR
LENS
AGC
Motion Detection
White Balance
Sens -up (Frame Integration)
Gamma
Ambient Temp.
Specifications. 17
1/3 inch 2.4Megapixel SONY COMS SENSOR
Progressive Scan
1936(H)x 1217(V)= 2,43M (Pixel)
2000(H)x 1211(V)= 2,43M (Pixel)
More than 50dB
Auto / Flk
1/60 ~1/120,000 sec
1/50 ~1/120,000 sec
0.5 Lux (Color), 0.1 Lux (BW) , 0.02 Lux (Sens-up x 30)
Internal only
BLC ON
AUTO
ESC
Low / Middle / High / Off (Selectable option)
2DNR / 3DNR / SMART NR (Selectable option)
3.6 mm 92° , F :2.0 Fix board LENS
Middle ( AGC ON)
On / Off (3 Zone Selectable option)
AWB
On / OFF (Selectable limit ~ x30 ) (Selectable option)
r = 0.45
-20°C ~ +50 °C
WDL-1900PVM / WDL-1900PVM-HD
Memo
6751 KATELLA AVE CYPRESS, CA 90630, USA
Tel. (714) 761-2100, Fax: (714) 761-3811
www.weldex.com / [email protected]
Made in Korea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement