LSI MegaRAID SAS 9260-4i RAID controller User manual

LSI MegaRAID SAS 9260-4i RAID controller User manual

Below you will find brief information for RAID controller MegaRAID SAS 9260-4i. This document describes firmware update procedures for the LSI MegaRAID SAS 9260-4i, including the identification of the controller and firmware version for compatibility. It also highlights the importance of confirming the appropriate settings for the controller. It emphasizes the need to verify successful firmware updates by reviewing the updated firmware version.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

RAID Controller MegaRAID SAS 9260-4i User Manual | Manualzz
LSI MegaRAID Controller
ファームウェアアップデート手順
2013/11/12
本手順書は、LSI MegaRAID コントローラのファームウェアアップデート手順について記載したもので
す。
1.アップデート対象
<対象製品>
・CloudyⅡ NAS/Windows( 3.5 インチ HDD 搭載モデル )
・CloudyⅡ iX( 3.5 インチ HDD 搭載モデル )
<対象 RAID コントローラ>
・LSI MegaRAID SAS 9260-4i
<対象ファームウェア>
・Firmware Package Version:12.12.0-0139
(Firmware Version:2.130.373-2022)
上記 3 点全て該当する場合は、本アップデートの実施をお願いします。
コントローラおよびファームウェアの確認方法は以降のアップデート手順に記載しています。
アップデート対象でない場合は、「RAID コントローラ設定手順」を参照のうえ、コントローラの推奨
設定値を確認/変更されることをお勧めします。
1
2. ファームウェア アップデート手順
1. 弊社ホームページよりファームウェアのダウンロードを行ない、ダウンロードしたファイル(mr2108fw.rom)を
サーバの任意の場所に保存してください。
2. Windows をご使用の場合は、デスクトップにある MSM のショートカットから MSM(MegaRAIDStorageManager)
画面を起動させ、ログイン名とパスワードを入力し、ホーム画面を表示させます。
iX をご使用の場合は、MSM がインストールされた PC から同様の手順をおこなってください。
3. 初期画面から[Physical]-[LSIMegaRAIDSAS****]を選択し、RAID コントローラとファームウェアバージョンを
確認します。
・アップデート対象コントローラ:LSI MegaRAID SAS 9260-4i
・アップデート対象ファームウェア:Firmware Package Version:12.12.0-0139
(Firmware Version:2.130.373-2022)
上記 2 点が該当する場合は、次の4.以降の手順に進みアップデートを行なってください。
該当しない場合は、アップデート作業は不要ですので、本作業は終了となります。
4. [Dashboad]タブをクリックし初期画面を表示させ、「Update firmware」をクリックします。
2
5. ファイル選択画面が表示されるので、[Browse]ボタンをクリックし、ファームウェアを選択し[Open]ボタンをクリ
ックします。
6. [OK]ボタンをクリックするとアップデートが開始されます。
7. 確認画面が表示されるので、「Confirm」にチェックを入れ、[Yes]をクリックします。
8. アップデートが実行されます。
3
9. アップデートが完了し、再起動不要のオプションを使うかどうかの確認メッセージが表示されるので、再起動
をしない場合は「Confirm」にチェックを入れ、再起動を行なう場合は、チェックを入れず[Yes]ボタンをクリック
します。
ファームウェアのバージョンによってはこのメッセージは異なる場合があります。
10.[Physical]-[LSIMegaRAIDSAS****]を選択し、ファームウェアバージョンが変更されたことを確認します。
<最新ファームウェア>
Firmware Package Version:12.13.0-0154 (Firmware Version:2.130.383.2315)
以上で、ファームウェアアップデートの作業は終了です。
※本アップデートが完了しましたら、別途手順書を参照いただき Patrol Read と ConsistencyCheck の設定を確認
いただくことをお勧めします。
4
LSI MegaRAID Controllers Release Note
LSI MegaRAID SAS 9260-4i
【 Firmware
SCGCQ00307050
SCGCQ00338490
SCGCQ00341791
SCGCQ00361303
SCGCQ00371477
SCGCQ00375250
SCGCQ00375854
SCGCQ00384381
SCGCQ00391094
SCGCQ00392062
SCGCQ00392063
SCGCQ00396335
SCGCQ00363619
【 Firmware
Package Version:12.13.0-0154 】
Defect
Not able to flash both 9265-8i and 9285-8e card with 5.3 patch 1 firmware.However,
it is ok on 9266-8i.
Defect
Invalid target ID after new logical drive creation
Defect
Support for mutlipath topology is broken
Defect
On iMR FW update caused card to FW fault state and card cannot boot to OS.
Defect
During Reconstruction (R0->R5) when system reboots the reconstruction doesnt
resume. System hangs.
Defect
OEM BMC see clock stetching on I2C bus
Defect
adapterOperations.alarmControl is being set to 1 even if controller doesnot have
alarm on board
Defect
Drive temperature is shown very high on 9240
Defect
9260-16i's drive locate/fault LED header doesn't work
Defect
Firmware halts when flashing components other than app.rom for OEM controller
Defect
PL library and files checkin for PL version 5.38
Defect
9260-16i's drive locate/fault LED header is not working properly.
EnhancementRequest Set the Recovery mode page (WriteRetryCount and recoveryTimeLimit)
Package Version:12.12.0-0139 】
Firmware defects:
SCGCQ00262426 - If VD is secured while reconstruction is going on does not stay secured once reconstruction
is done.
SCGCQ00313883 - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate
a manual Relearn
SCGCQ00319537 - System hang on IBM machine with a critical boot message
SCGCQ00327006 - Event (MR_EVT_CTRL_RESETNOW_DONE ) is not generated after OFU is completed
SCGCQ00329851 - EEPROM corruption(BQ2060 errata) due to corrupted value of design Capacity written in FCC
for iBBU07
SCGCQ00332181 - INVALID SGL causes dump into montask, OCR does not recover. MonTask: line 377 in
file ../../dm/mpt2/mptrec.c & MonTask: line
SCGCQ00333679 - reverting the changes of SCGCQ00295604
SCGCQ00333696 - EEPROM corruption(BQ2060 errata) due to corrupted value of design Capacity written in FCC
for iBBU07
SCGCQ00334032 - Code review checkin
SCGCQ00335607 - Firmware upgrade/downgrade not possible due to missing env stamping
SCGCQ00336716 - Megamon issue when disabling the drive security on a MR controller with spun down FDE drives.
SCGCQ00337894 - OFU is not happening when tried to upgrade firmware.
SCGCQ00338008 - Flash of package with OFU request
SCGCQ00345497 - Code review: With the new approach for CtrlOFUPossibleSet/Get() shutdown path broken
SCGCQ00346275 - Copyback on a drive hits kill adapter
SCGCQ00347253 - Firmware fails to return proper value when flashed same firmware image with different
stamping with OFU request.
SCGCQ00353344 - Data Corruption during Raid Level Migration
SCGCQ00335935 - Coverity Defect fixes
SCGCQ00286152 - GetConnectorIndex() Out of bound array access
SCGCQ00334889 - Multiple switch cases are not handles correctly in debug functions
SCGCQ00314781 - Controller always enter HSM when it is set to HCOE
SCGCQ00317767 - Code Review Defect: Correct the error in copy back path smart errors path
SCGCQ00333346 - Dont interpret the cachecade BVD flags if the volume is created with old FW which does
not support cachecade.
SCGCQ00340772 - Address Action Item SCGCQ00340495 (Check coding standard for structure OfuRequestState)
SCGCQ00332658 - Out-of-bounds access (OVERRUN_STATIC) of an array "ar" in pdCopyBackSpinupCallBack
5
SCGCQ00332651 SCGCQ00329070
SCGCQ00315029
SCGCQ00332588
SCGCQ00307050
-
SCGCQ00353322
SCGCQ00328109
SCGCQ00337060
SCGCQ00341791
SCGCQ00330344
-
SCGCQ00332099 -
Out-of-bounds access (OVERRUN_STATIC) of an array "nvInfo->lockKeyBlob.keyCheck" in
displayNvKeyInfo
Coverity Defect
PD clear operation is not handle correctly with spun drive drives
Fix coverity defects 10216 and 10425 (overrun and potential NULL pointer access)
Not able to flash both 9265-8i and 9285-8e card with 5.3 patch 1 firmware.However, it is
ok on 9266-8i.
Unable to enable ocr using application due to FW ocr setting taking precedence
Out of bound access in LDBBMListInit
Coverity Defects
Support for mutlipath topology is broken
FW halts with a a kill adaptor on performing an onffline of the drive under copyback. line
1188 in file ../../raid/1078dma.c
Out-of-bounds access (OVERRUN_STATIC) of an array "ar" in pdDcmdRebuildCB
Firmware Enhancements:
SCGCQ00302600 - Added more debug information
SCGCQ00307949 - True FW Online update for Liberator
SCGCQ00307950 - BGI is in endless loop continuously restarting after completion
SCGCQ00308988 - Improve foreign config import for iMR with mixed JBOD/RAID settings
SCGCQ00314258 - Need the ability to determine what disk a logical LBA associate with on the fly, api
call/algorithim/etc. on Liberator
SCGCQ00323446 - Add NVDATA support to make 512 Emulated drive support as configurable for customers.
SCGCQ00345203 - megacli reports battery pack is missing on hot insertion
SCGCQ00314965 - iBBU07 - SOH bad will be declared for low capacity battery before starting learn cycle
SCGCQ00307956 - iBBU07: EEPROM and register values will be updated to revised values at first boot after
FW flash.
BIOS:
Version change only
UEFI Driver:
SCGCQ00262858
SCGCQ00308870
SCGCQ00312683
SCGCQ00320619
SCGCQ00335617
SCGCQ00339371
SCGCQ00343869
SCGCQ00338066
SCGCQ00338782
SCGCQ00340581
Defect
Defect
Debug message is shown from EFI app choice prompt
EFI Driver 518\When disconnecting the driver in EFI, I am still able to exectue
the EFI utility menu.
Defect
UEFI Driver not timing out in 3 mins when FW is in undefined state
Defect
UEFI: Build Device Path and Get Next Target function of SCSI Pass Thru is not
returning correct EFI status for certain cases
Defect
Drives are reporting timeout on Write Buffer cmd
Defect
UEFI Driver fails SCT Test
Defect
Enhance critical boot message handling
EnhancementRequest UEFI - HAMR: Fire LD list query based on maxHANodes
EnhancementRequest If SetOptions is called for Invader dont show EFI WebBIOS and EFI CLI
option
EnhancementRequest UEFI Driver should check pMRCtrlInfo ->maxHANodes with > 1 to determine
HAMR
HII:
SCGCQ00318010
SCGCQ00319005
SCGCQ00319010
SCGCQ00293056
(DFCT) - Allows to select Cachecade VD as Boot device
(DFCT) - HII will not allow config to be cleared no drives attached
(DFCT) - HII while in safe mode locks up when entering View drive
(ENHREQ) - HII: LSIP200198414/LSIP200229508/LSIP200231613: Disables all requirement for human
input at boot time
SCGCQ00317934 (ENHREQ) - Add MFI State error string for the new MFI stat error codes
SCGCQ00317991 (ENHREQ) - Remove 'Adaptive Read Ahead' option from every MegaRAID management utility (PR:
SCGCQ00295908)
6

advertisement

Key Features

  • Firmware update instructions
  • Controller identification
  • Firmware version verification
  • Confirmation of successful update
  • Importance of proper controller settings

Frequently Answers and Questions

What is the purpose of this document?
This document outlines the procedures for updating the firmware of the LSI MegaRAID SAS 9260-4i controller.
How do I confirm that the firmware update was successful?
After the update is complete, verify that the firmware version has changed by checking the 'Physical' -> 'LSIMegaRAIDSAS****' section in the MSM.
Why are proper controller settings important?
Optimizing the controller settings ensures optimal performance and stability of your RAID system.

Related manuals

Download PDF

advertisement