Project __________________________________

Specification Line®

Glass Door Single Section Dual Temp Refrigerator/

Freezer Pass-Thru Units

Models

SSDTP1-GH Refrigerator top/freezer bottom stainless exterior and interior glass half door

SSDBP1-GH

SADTP1-GH

SADBP1-GH

SMDTP1-GH

SMDBP1-GH

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Freezer top/refrigerator bottom stainless exterior and interior glass half door

Refrigerator top/freezer bottom stainless exterior and aluminum interior glass half door

Freezer top/refrigerator bottom stainless exterior and aluminum interior glass half door

Refrigerator top/freezer bottom stainless front aluminum exterior and interior glass half door

Freezer top/refrigerator bottom stainless front aluminum exterior and interior glass half door

SSDBP1-GH

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Standard Features

Stainless steel interior and exterior (SS)

Stainless steel exterior, aluminum interior (SA)

Aluminum interior and exterior, stainless front

(SM)

Built in door locks with heavy duty strikes

Recessed metal door handle

Pressure relief valve is standard to prevent door vapor lock

Two exterior digital thermometers with high/ low temperature alarm

Easy to use electronic control

Easy access “flip up” shroud

Four wire shelves - SA/SS standard with chrome plated shelves and SM standard with epoxy coated shelves

10’ attached cord and plug

6” adjustable stainless steel legs

Stainless steel breaker strips

High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP

(Ozone Depletion Potential), Non GWP (Global

Warming Potential) polyurethane keeps energy costs low

Energy savings door heater switch

Two year parts & labor warranty

Five year compressor warranty

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Options &

Accessories

Security (prison) package

Incandescent light

Door field rehingability

Additional shelves

Tray slides

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

Stainless steel kick plate

Laminate kick plate

4” stainless steel utility base

230-50-1 electrical

220-60-1 electrical

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel

(SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Four wire shelves are provided, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated.

Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior fluorescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Glass door models have a glass doors on one side and

solid doors on the other. Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and

PVC. Each door has two edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face.

Refrigeration system: Each compartment has its own separate refrigeration system. Condensing units are located on top of the cabinet, outside the food zone, behind the removable upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling of each compartment. Defrost is automatic.

Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it is evaporated with the aid of an electric heater. Each compartment’s temperature is individually monitored, controlled and displayed on the exterior of the cabinet. Refrigerator compartment maintains between 33°F and 41°F. Freezer compartment maintains temperature between 0ºF and -5ºF.

Electrical: Unit comes with one 10’ cord and plug with single point connection to all cabinet and refrigeration system electronics. It is attached to a junction box mounted on the exterior top of the cabinet.

980 S. Isabella Rd.

Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981

Fax: 800-669-0619 www.delfield.com

29.00

29.00”

73.7cm

25.00”

63.5cm

36.25”

92.1cm

Plan View

SPECIFICATION LINE

SPECIFICATION LINE

SPECIFICATION LINE

81.12”

206.4cm

75.00”

190.5cm

31.00"

78.7cm

58"

58.00"

147.3cm

6.12”

15.5cm

End View Elevation View

Mechanical Data

MODEL

NUMBER

SSDTP1-GH, SADTP1-GH,

SMDTP1-GH

SSDBP1-GH, SADBP1-GH,

SMDBP1-GH

DESCRIPTION

Top Refrigerator

Bottom Freezer

Top Freezer

Bottom Refrigerator

VOLTAGE

115/60/1

115/60/1

AMPS

14.0

14.0

STORAGE

CU.FT.

12.19

12.19

12.19

12.19

NUMBER OF

SHELVES

2

2

2

2

Delfield reserves the right to make changes to the design or specifications without prior notice.

H.P.

1/5

1/3

1/3

1/5

BTU

SYSTEM

1543

1260

1260

1543

SHIP

WEIGHT

525lbs

(238kg)

525lbs

(238kg)

980 S. Isabella Rd.

Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981

Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A.

DSSSDP1-G

08/10

NEMA

PLUG

5-20P

ENERGY

(KWH)

N/A

5-20P N/A

SPECIFICATION LINE

56.00

56.00

SPECIFICATION LINE

SPECIFICATION LINE

34.00

83.00

SPECIFICATION LINE

SPECIFICATION LINE SPECIFICATION LINE

34.00