Solar inverters

ABB string inverters

PVI-10.0/12.0-I-OUTD

10 to 12 kW

Designed for commercial usage, this three-phase inverter is highly unique in its ability to control the performance of the PV panels, especially during periods of variable weather conditions.

The high speed, precise Multiple Power

Point Tracker (MPPT) algorithm enables real-time power tracking and improved energy harvesting.

The input voltage range makes the inverter suitable for installations with reduced string size

Dual input section with independent

MPP tracking, allows for optimal energy harvesting from two sub-arrays oriented in different directions.

Each inverter is set on specific grid codes which can be selected in the field.

Highlights

− True three-phase bridge topology for

DC/AC output converter

− The HF isolation allows positive or negative ground configuration

− The unit is free of electrolytic capacitors, leading to a longer product lifetime

− Night wake up button to access energy harvesting data and error log

This device has two independent

MPPTs and efficiency ratings of up to

97.3%.

Flat efficiency curves ensure high efficiency at all output levels delivering consistent and stable performance across the entire input voltage and output power range.

The outdoor enclosure provides unrestricted usage under any environmental condition.

Additional highlights

− Integrated DC disconnect switch in compliance with international

Standards (-S version)

− Natural convection cooling for maximum reliability

− Outdoor enclosure for unrestricted use under any environmental conditions (IP65)

− RS-485 communication interface (for connection to laptop or data logger)

Technical data and types

Type code

Input side

Absolute maximum DC input voltage (V max,abs

)

Start-up DC input voltage (V start

)

Operating DC input voltage range (V dcmin

...V

dcmax

)

Rated DC input voltage (V dcr

)

Rated DC input power (P dcr

)

Number of independent MPPT

Maximum DC input power for each MPPT (P

MPPTmax

)

DC input voltage range with parallel configuration of

MPPT at P acr

DC power limitation with parallel configuration of MPPT

DC power limitation for each MPPT with independent configuration of MPPT at P acr

, max unbalance example

Maximum DC input current (I dcmax

) / for each MPPT

(I

MPPTmax

)

Maximum input short circuit current for each MPPT

Number of DC inputs pairs for each MPPT

DC connection type

Input protection

Reverse polarity protection

Input over voltage protection for each MPPT - varistor

Photovoltaic array isolation control

DC switch rating for each MPPT (version with DC switch)

Output side

AC grid connection type

Rated AC power (P acr

@cos φ=1 )

Maximum AC output power (P acmax

@cos φ=1)

Maximum apparent power (S max

)

Rated AC grid voltage (V ac,r

)

AC voltage range

Maximum AC output current (I ac,max

)

Contributory fault current

Rated output frequency (f r

)

Output frequency range (f min

...f

max

)

Nominal power factor and adjustable range

Total current harmonic distortion

AC connection type

Output protection

Anti-islanding protection

Maximum AC overcurrent protection

Output overvoltage protection - varistor

PVI-10.0-I-OUTD-400 PVI-12.0-I-OUTD-400

520 V

200 V (adj. 120...350 V)

0.7 x V start

...520 V

345 V

10500 W 12300 W

2 (5)

6800 W

220...470 V 250...470 V

Linear derating from max to null [470V ≤V

6800 W [285V ≤V

MPPT

≤470V]

the other channel: P dcr

[155V ≤V

MPPT

-6800W

≤470V]

MPPT

≤520V]

6800 W [275V

[220V ≤V

≤V

MPPT

≤470V] dcr

-6800W

MPPT

≤470V]

48.0 A / 24.0 A 50.0 A / 25.0 A

29.0 A

2

Tool Free PV connector WM / MC4

Yes, from limited current source

2

According to local standard

32 A / 600 V

Three phase 3W or 4W+PE

10000 W

11000 W (3)

11100 VA

12000 W

12500 W (4)

13300 VA

400 V

320...480 V (1)

16.0 A 18.0 A

25.0 A

50 Hz / 60 Hz

47...53 Hz / 57…63 Hz (2)

> 0.995, adj. ± 0.9 with P acr

=10.0 kW

< 2%

> 0.995, adj. ± 0.9 with P acr

=12.0 kW

Screw terminal block, cable gland M40

According to local standard

20.0 A

3 plus gas arrester

2 ABB Solar inverters | Product flyer for PVI-10.0/12.0-I-OUTD

Block diagram of PVI-10.0/12.0-I-OUTD

IN1.1(+)

IN1.2(+)

IN1.1(-)

IN1.2(-)

+

IN1

-

IN1.1(+)

IN1.2(+)

IN1.1(-)

IN1.2(-)

+ +

-

IN1 IN1

-

MPPT 1

(DC/DC)

HF transformer Bulk caps

Inverter

(DC/AC)

Line filter

Grid parallel relay

IN2.1(+)

IN1.2(+)

IN2.1(-)

IN2.2(-)

+

IN2

-

IN2.1(+)

IN2.2(+)

IN2.1(-)

IN2.2(-)

Standard version -S version

+

-

+

IN2 IN2

-

MPPT 2

(DC/DC)

HF transformer

DC/DC

DSP contr.

µP

DC/AC

DSP contr.

RS485

+ T/R

- T/R

RTN

Remote control

+ R

- R

Alarm

N.C

N.O

C

Control circuit

Technical data and types

Type code

Operating performance

Maximum efficiency ( η max

)

Weighted efficiency (EURO/CEC)

Feed in power threshold

Stand-by consumption

Communication

Wired local monitoring

Remote monitoring

Wireless local monitoring

User interface

Environmental

PVI-10.0-I-OUTD-400

97.3%

97.0% / -

30 W

< 8 W

PVI-12.0-I-OUTD-400

PVI-USB-RS232_485 (opt.)

VSN300 Wifi Logger Card (6) (opt.), PVI-AEC-EVO (opt.), VSN700 Data Logger (opt.)

VSN300 Wifi Logger Card (6) (opt.)

16 characters x 2 lines LCD display

Ambient temperature range

-25...+60°C /-13...140°F with derating above 50°C/122°F

0...100% condensing

< 50 dB(A) @ 1 m

2000 m / 6560 ft

IP 65

Natural

716mm x 645mm x 222mm / 28.2” x 25.4” x 8.7”

< 45.8 kg / 99.0 lb

Wall bracket

-25...+60°C /-13...140°F with derating above 45°C/113°F

Relative humidity

Noise emission

Maximum operating altitude without derating

Physical

Environmental protection rating

Cooling

Dimension (H x W x D)

Weight

Mounting system

Safety

Isolation level

Marking

Safety and EMC standard

Grid standard (check your sales channel for availability)

HF transformer

CE (50 Hz only)

EN 50178, EN62109-1, EN62109-2,

AS/NZS3100, AS/NZS 60950, EN61000-3-2,

EN61000-3-3, EN61000-6-2, EN61000-6-3

CEI 0-21, CEI 0-16, VDE 0126-1-1,

VDE-AR-N 4105, G83/2, G59/3, C10/11,

EN 50438 (not for all national appendices),

RD1699, RD 1565, AS 4777, ABNT NBR

16149, CLC/FprTS 50549

EN 50178, EN62109-1, EN62109-2,

AS/NZS3100, AS/NZS 60950, EN61000-6-2,

EN61000-6-3, EN61000-3-11, EN61000-3-12

CEI 0-21, CEI 0-16, VDE 0126-1-1, VDE-AR-N

4105, G59/3, C10/11, EN 50438 (not for all national appendices), RD1699, RD 1565, AS

4777, ABNT NBR 16149, CLC/FprTS 50549

Available products variants

Standard

With DC switch

PVI-10.0-I-OUTD-400

PVI-10.0-I-OUTD-S-400

1. The AC voltage range may vary depending on specific country grid standard

2. The Frequency range may vary depending on specific country grid standard

4. Limited to 12000 W for Germany

5. Independent MPPT just with negative ground

3. Limited to 10000 W for Belgium and Germany 6. Check availability before to order

Remark. Features not specifically listed in the present data sheet are not included in the product

PVI-12.0-I-OUTD-400

PVI-12.0-I-OUTD-S-400

Product flyer for PVI-10.0/12.0-I-OUTD | ABB Solar inverters 3

L1

L2

L3

N

PE

Efficiency curves of PVI-10.0-I-OUTD

98

97

100

99

96

95

94

93

92

91

90

0% 10% 20% 30% 40% 50% 60%

% of Rated Output Power

70% 80%

220 Vdc

345 Vdc

416 Vdc

90% 100%

Efficiency curves of PVI-12.0-I-OUTD

98

97

96

95

100

99

94

93

92

91

90

0% 10% 20% 30% 40% 50% 60%

% of Rated Output Power

70% 80%

250 Vdc

345 Vdc

416 Vdc

90% 100%

Support and service

ABB supports its customers with dedicated, global service organization in more than 60 countries and strong regional and national technical partner networks providing complete range of life cycle services.

For more information please contact your local ABB representative or visit: www.abb.com/solarinverters www.abb.com

© Copyright 2014 ABB. All rights reserved.

Specifications subject to change without notice.