Quick Installation Guide

TEW-444UB

Español .....................................................................................................

1. Antes de iniciar ..................................................................................

2. Cómo se instala .................................................................................

3. Configuración inalámbrica .................................................................

1

1

2

4

Troubleshooting ........................................................................................

6

Version 06.05.2006

1. Antes de iniciar

Requisitos del sistema

Una unidad de CD-ROM

PC con un puerto USB 1.1 ó 2.0 disponible

CPU: 300 MHz o superior

Memoria: 32MB o más

Windows 98SE/ME/2000/XP/2003 Server

Aplicación

Workstation with 108Mbps

Wireless USB 2.0 Adapter

(TEW-444UB)

Contenidos del paquete

TEW-444UB

CD-ROM del controlador y la herramienta

Guía de instalación rápida

Cable de extensión USB 2.0

Workstation with

108Mbps 802.11g

Wireless PCI Adapter

(TEW-443PI)

108Mbps Wireless

Access Point

(TEW-450APB)

Internet

Cable/DSL

Modem

Notebook with 108Mbps

802.11g Wireless PC Card

(TEW-441PC)

Cable/DSL 4-Port

Firewall Router

(TW100-BRF114)

1

Español

2. Cómo se instala

¡Importante! NO conecte el adaptador USB inalámbrico a su PC a menos que se le indique.

1. Introduzca el CD-ROM del

controlador y de la herramienta en la unidad de CD-ROM de su PC y luego haga clic en

Install Utility

(Instalar herramienta).

2. Siga las instrucciones del

InstallShield Wizard (asistente de

InstallShield) y luego haga clic en

Finish (Finalizar).

2

Español

Nota: El TEW-444UB es hot pluggable, puede conectarse o desconectarse con el PC encendido.

3. Conecte el adaptador USB inalámbrico TEW-444UB al puerto

USB de su PC.

Nota: Windows 2003 Server/XP/2000/ME/98SE detectará e instalará de manera automática los controladores apropiados. Pase a la

sección 3 para

Windows 2003 Server/XP/2000/ME. Para Windows 98SE, por favor introduzca su CD-ROM de Windows 98SE y siga con el

paso 4.

4. Haga clic en OK.

La instalación ha sido completada

3

Español

3. Configuración inalámbrica

Nota: Una configuración inalámbrica requiere un Punto de Acceso 802.11g ó

802.11b (para Modo de Infraestructura) u otro adaptador inalámbrico 802.11g

(para un modo de red Ad-Hoc o de Usuario a Usuario).

1. Haga doble clic en el icono

Wireless (Inalámbrico).

2. Haga clic en Profile Management

(Gestión de perfil), y luego pulse

Scan (escanear).

3. Haga clic en el SSID apropiado, y después pulse Activate (Activar)

4

Español

4. Escriba un Profile Name (Nombre de perfil), y después pulse OK.

5. Compruebe que hay potencia de señal. La configuración ha finalizado.

La configuración inalámbrica ha finalizado

Para obtener información más detallada sobre la configuración así como de las configuraciones avanzadas del TEW-444UB , por favor consulte la sección de resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de

Trendnet en http://www.trendnet.com.

5

Español

Troubleshooting

Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?

A1:

If the installation menu does not appear automatically, click Start, click Run, and type

D:\setup.exe where "D" in "D:\setup.exe" is the letter assigned to your computer's CD-

ROM Drive. And then click OK to start the installation.

Q2: When I open up the utility, all the buttons are greyed out.

A2:

Verify that the device is installed properly. Right click on

My Computer -> Properties. Click on

Hardware, then Device Manager. Double click on Network Adapters. Make sure that

802.11g Wireless Network Adapter is listed and there is no yellow question mark or exclamation point. Also perform a reboot on the computer.

Q3: When I click on Scan, I can not see my SSID.

A3:

Log on to your wireless router or access point and make sure that the SSID broadcast option is not disabled. Make sure the wireless light on your wireless router or access point is on.

Q4: I completed all the steps in the Quick Installation Guide, but my Wireless USB Adapter isn't connecting to my access point. What should I do?

A4: First, verify that the Network Name (SSID) matches your wireless router or wireless access point’s SSID. Second, check your TCP/IP properties to ensure that Obtain an IP address automatically is selected. Third, click

Profile Management -> Scan in the Wireless Client Utility to check and see if there are any available wireless networks listed. Third, click

Profile Management

-> Scan in the Wireless Client Utility to check and see if there are any available wireless networks listed.

Q5: The utility program shows good signal strength, but I can not get onto the Internet.

A5:

First, log on to your wireless router or access point and check to see if encryption is enable. If encryption is enabled, go to

Profile Management -> Modify -> Security. Select the proper

Security Options, click on configure, then put in the proper encryption key. Then click Ok.

Second, make sure to disable any firewall programs. Third, make sure that your router is properly configured for Internet.

If you still encounter problems or have any questions regarding the TEW-444UB, please refer to the

User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support Departmen

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received. Including interference that may cause undesired operation.

Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local

Authority or Retailer for recycling advice.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

6

TRENDnet Technical Support

Toll Free Telephone: 1(866) 845-3673

24/7 Tech Support

Europe .

.

.

.

Toll Free Telephone: +00800 60 76 76 67

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

Worldwide

Telephone: +(31) (0) 20 504 05 35

English/Espanol - 24/7

Francais/Deutsch - 11am-8pm, Monday - Friday MET

Product Warranty Registration

Please take a moment to register your product online.

Go to TRENDnet’s website at http://www.trendnet.com

3135 Kashiwa Street

Torrance, CA 90505

USA

Copyright ©2006. All Rights Reserved. TRENDnet.