Mieo HT706 User manual

./ ;,

,'7

:,:::!

1/ -a :-

,; "{*o i .;i, -.

;//./

.

:

) il .."--

: \:1:. .4,

\' t'

:

,//

.,

;

/

/ "

"':i3';'ii:/'

;tY':;,?. /

,.11; j . ..

,,|

\:;: t'

:,:':/ t: -.^. I t: t&"r;'-,/ ru iEBr r l;?

,

'

MiHO

Non-Contact

Infrared Thermometer

User

manual

Model:HT706

Features

Thank you for purchasing the Noncontact lnfrared Thermometer. Please read the following instructions to achieve the most accurate temperatures and safe operation. With proper care and use, your thermometer will provide you reliable readings for many years.

Your Non-contact

I nfrared Thermometer is intended for monitoring human body temperature in the home and is appropriate for all ages. This kind of the thermometer can also be used to

measure

the temperature of objects such as

bath

water, a.bottle of milk or a variety of other items. lts non-contact design thermometer less mikes

this

threatening and more sanitary than most other thermometers.

The thermometer can even be used while a child is sleeping.

2 sec .Measurement

|r,A]l

,.r". atarm over 38c

% Ca"iu"-Fahrenheit

B Memory 10 Readings

[S-l

eoov temperature

|

!

n,titt

I bot1" surface temperature in baby's

l*l

surtace temperature of Baby's bath

(front)

Overview

LCD display

SCAN Button

'MEM'Button

(Memorv)

Perbon/Obirict

Mode Button

LED Lisht

Power Button

(back) lnfrared Lens

Battery Cover

LCD displar

Meaning

"cfr

Fahrenheil/Celsius t

For6heed Scan Mod6 sP Object Scan Mode

B8 l\remory symbol and neasuremenl numbet lIo

5

Scanning in progrdss

Low battery

Oescription

@

@

Happy face

Sad face

Jnit will work;replace batteries soon rnotcates temperature is lower than

100.4'F(38t) nolcatas lemp€rature is 100.47

(38t) or hlgher

{gtaKe temper6lur€ ensuring propor r'lgasurement is b6low rormal tomp6ralu16 ange.

)osltioning E4

E

Measuremenl is above normal temperature range.

tetaKe temperature ensuring prop6r

)osilioning tri Operaling temperature ls outside ofthe permiSsiblo range

60.8T-95r;1 6C-35())

.

lake th€rmomterto a room where the emperaluor i6 wllhin the permlssible ange.Wait 45 minutes to stabilize hermometar tt rg

BIank display

Low battery warnlng lheck batt6ry potarity.lvlay n€ed to

'6place batteries.

s rmmedaat6ly

Replacing the Battery

When the battery on the

'Lo ' and symbol the battery

r:

appears screen, the batteries will need to be replaced soon. When the letters

slmbol n

appears on the display, the batteries need to be replaced before taking another measurement. Rechargeable batteries are okay to use in this thermometer.

1. Gently slide the battdry cover back.

2. Carefully remove the old batteries and properly discard.

3. lnsert new batteries according to the proper polarity.

4.

Slide the battery cover back on.

NOTE:

Please properly dispose of the away from small children batteries and heat.

Operating Guide

l.Press the

:power' button to turn on the thermometer.

2.PresS the

the

't /*o

'button to change testing mode of person and object.

Object

Memory Button

Mode Button r-l

LUU]

Body l.Press the 'power' button to turn on the thermometer.

2. Press and hold both the

'

'MEM' buttons

ll /

5o forapproximately

3

'

and seconds. This either will change the mode to

'F or

'C

, Once the thermometer beeps,the unit is ready for measurement.

ri

'lr t/i

1

. lf the thermometer is off, press the

'Power' button to turn the thermometer on.

2. Press and hold the 'SCAN' button. The screen should appear the follow picture.

4. While continuing

to

press the

'SCAN' button, slowly move the thermometer toward or away from their forehead until the thermometer is continuously beeping and the LED light flashes.

3. Aim the front of the person's forehead, theimometer l,lold the at the thermometer approximately 3 to 5 cm away from the forehead.

5.

The

'beeping' indicates that the distance required for the measurement is correct. Once the thermometer is consistently and continuously beeping, release the 'SCAN

'

button.

NOTE: Attempting to take a measurement anywhere else on the body may result in an inaccurate reading.

6. The thermometer show the will beep once and temperature reading for 2 seconds.

frl l6E o"c

NOTE: A happy face appear on the symbol

@ will display if the temperature is below 100.4T (38C). lf the temperature reading is above face symbol

100.4'F (38C), a sad

@ will appear.

lf the temperature is outside of the thermometer' s sensory

range,

'Lo'

'Hi' will appear on

th;

display. lf however, the temperature is outside or of the thermometer,s permissible measurement appear

range,

on the display.

'Err' will

7. The thermometer will automatically beep and shut-off after minute of non-use.

approximately one

NOTE:

To

".

ensure accuracy:

Please wait at least 1 minute between successive readings.

.

Clean the probe lens before and each use.

after

1

. lf on.

the thermometer is off , press the

'Power' button to turn the thermometer

2. Press

of

objecl

'l /.oo '

button to set the mode measurement.

i r" dts uu

3. Press and hold the 'SCAN' button and then aim the front of the thermometer at the object. Hold the thermometer approximately

3 to

5 cm away from the object and release the'SCAN' button.

4. The thermometer will beep once and show the temperature reading for 2 seconds.

5. The thermometer will automatically beep and shut-off after approximately one minute of non-use.

ll

1 tir

1. Press up the 'MEM' button to recall to 10 measures stored in memorY.

iffiF] Memory Button i]ili/ltl una.

Button

2. The

I

symbol or no symbol will appear with each measurement stored in memory to indicate whether a person or object temperature was taken.

E8t

I

]Efi

@rl I

3.Thehappy face symbol

g

orsadface@ will appear 5 seconds after viewing the measurement stored in memory.

riry-

NOTE:

After 10 measurements have been stored in the memory, the oldest reading will be automatically deleted.

Cleaning & Storage

To ensure accurate measurements, clean the lens before and after each use.

Fingerprints and dirt can cause inaccurate readings.

1. Press the Power button to turn the thermometer on.

2. To clear the memory, simply hold the

'MEM' button down until the beeps and two thermometer horizontal lines appear.

fir

.

Use an alcohol swab or a soft cotton swab moistened with alcohol to clean the thermometer lens.

.

Only use a soft dry cloth to ilean the thermometer.

. Make sure that liquid does not enter the interior of the thermometer.

'Never use abrasive cleaning agents, thinners or gasoline for cleaning.

.

Do not immerse into water or other cleaning liquids.

Hfi ee

..$S

.

.

Do

Do not use paper fibers may scratch the lens.

thermometer.

towels, but the not use water to clean the lens or

.

Remove the battery if the thermometer will not be used for an extended period of time.

.

Store in a sun-free and dust-free dry area at a temperature between

-25'C

-

55C ( -13'F

-

131T

) with relative humidity not exceeding 95%.

.

Protect the thermometer from severe impact or shock. KeeP stored in the protective storage bag.

ts

'

For accurate results,wait at least 30 minutes after exercising,bathing or returning from the outdoors.

.

Wait at Ieast 1 minute between read i ngs.

.

lf multiple readings are taken over a short period of time,use the average of those readings.

'

Because everyone' s temPerature varies slightly,keep a record of your body temperature to serve as a reference when judging a fever.

'

Keep your forehead dry and clean as the liquid(water or sweater)effects the measure result.

.

The measurement of forehead is equivalent to the oral temperatuer.

Use of this lRthermometer is not intended as a substitute for consultation with your

physician.

1 O

Specifications

Measuring Range

Human: 32.0C -42.2'C

89.6T

-

107.9"F

Object: 5.0C -100C

41.0"F - 212"F

Accuracy

Human :

+0.2Cl+0.4'F

Object: +1'C l+27

Memory

10 readings

Operation

Distance 3-5

cm

Operatin Temperature 16.0C- 35.0C

60.8T- 95.07

Storage

Temperature

-25C

-

55C

-13T

-

1317

Power

2xAAA 1.5V alkaline batteries

Dimension 134

x85

x31 mm

Weight 769(without battery)