I N S TA L L AT I O N

zombIe™ brake Pedal cover for fl 4406

fIts: all dressers, road kIng and flst models

Parts Included

1 Zombie Brake Pedal Pad

1 Zombie Emblem

1 Hardware Kit, including:

1 5/16-24 x 5/8 Socket Head Cap Screw (SHCS)

1 5/16” Split Lock Washer

1 Flat Washer

1 Installation Instructions

Please read and understand entire instructions before starting installation.

thank you for choosIng küryakyn!

In order to Protect you and others from PossIble Injury and/ or ProPerty damage or loss, Please Pay close attentIon to all

InstructIons, warnIngs, cautIons and attentIon notes regardIng the use and care of thIs Product.

WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE

CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR

SERIOUS INJURY.

ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.

tools suggested

Set of hex wrenches, combination wrenches or socket set and ratchet strIctly observe the followIng guIdelInes In order to use the

Product ProPerly and avoId PotentIally dangerous accIdents.

Procedure

steP 1 Read and understand all steps in the instructions before starting the installation.

Park the motorcycle on a hard, level surface and turn off the ignition.

steP 2 Remove the stock brake pedal cover. Peel the rubber cover off or remove the acorn nut and washer on the underside of the pedal, depending which model you have. Set the cover aside, it will not be re-used.

steP 3 Position the Zombie Brake Pedal Cover over the stock brake lever.

-cont.-

CUSTOMER SERVICE

877.370.3604 (toll free)

INSTALLATION QUESTIONS [email protected]

or call 715.247.2983

LIMITED WARRANTY

Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:

• Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).

• The product must be properly installed, maintained and operated under normal conditions.

• Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.

• Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.

• Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.

• Küryakyn electrical products are warranted for one

(1) year from the date of purchase by the consumer.

Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase.

• Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by

Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.

ABOUT OUR CATALOG

You’ll find all our innovations for H-D, GL and

Metric Cruisers in our annual catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn® product comes with a Proof-of-Purchase good for a complimentary catalog. Details in packaging.

Be sure to ask your local dealer about other

Küryakyn products, the motorcycle parts and accessories designed for riders by riders.

©2005 Küryakyn USA All Rights reserved.

4406-11HD-0208

steP 4 From the underside of the lever, insert the included 5/16-18 SHCS screw, 5/16” split lock washer, and washer through the lever and thread it into the Zombie cover; tighten the screw. See PIC.1.

steP 5 Ensure proper clearance and operation before riding the motorcycle.

WARNING! IMPROPER INSTALLATION OR USE OF THIS PRODUCT COULD RESULT IN SERIOUS

INJURY OR DEATH.

ATTENTION!

It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not warranty components lost due to improper installation. Periodic maintenance may be required.

PIc.1

Ride On!

Page 2

zombIe brake Pedal cover

InstallatIon