FG_Series_FG300_Specs

FG_Series_FG300_Specs
Magnet drive gear pump-motor units
FG200/FG300 series
Find out more
The Fluid-o-Tech FG series combines a 24V brushless
DC drive motor in a rotor-less configuration with a high
precision mag drive MG or PG series gear pump to deliver a high
end system capable of handling fluids in the most demanding
applications. The service life of the unit, due to fewer moving
parts and to the excellent balance of the system, is
greatly
extended compared to the traditional pump-motor units.
The integration of the pump, motor and variable speed controller
provides an electromagnetically coupled, leak free fluidic system
with a high degree of versatility. The extreme accuracy of the
design and of the finishing allows the unit to deliver a smooth
and pulsation free flow in all conditions. Different materials are
available for a wide array of fluids.
MAIN APPLICATIONS
• Medical equipment
• Cooling systems
• Hemodialysis apparatus
• Laboratory instrumentation
• Laser apparatus
• Water treatment
• Lubrication
• Sampling
• Ink-Jet printing systems
• Food processing equipment
TECHNICAL INFORMATION
Pump housing material
Gears and bushing material
Ports
Max static pressure
Max vacuum
Wet lift with water*
AISI 316L or PPS
Peek/PTFE
1/8” GAS or NPT
20 bar/290 psi
724 mmHg/28.5 inHg
~ 8 m/26.2 ft
Motor type
Speed range
Max output power
Motor IP protection
Insulation class
Unit weight
24 V BLDC
from 500 to 5000 rpm
50 W
IP 52
F
AISI 316L 910g/2lb - PPS 550g/1.2lb
* Priming ability varies with operating conditions and fluid characteristics
OPERATING RANGE
Max ambient temperature
Fluid temperature
Max torque
Min ambient temperature
40 °C//104 F
95 °C/203 F
30 mNm/4.2 in-oz at 5000 rpm
70 °C/150 F
55 °C/131 F
70 mNm/9.9 in-oz at 3500 rpm
5°C/41 F
95-105 ± 1
(3.78-4.13 ± 0.04 in)
24
(0.95 in)
48
(1.89 in)
300 ± 20
(11.8 ± 0.8 in)
6 x AWG22
100 mNm/14.1 in-oz at 3500 rpm
57
(2.24 in)
70 ± 5
(2.75 ± 0.2 in)
57
(2.24 in)
23-32
(0.94-1.26 in)
40 °C/104 F
40 °C/104 F
10
(0.39 in)
Dimensions in mm/inches
www.fluidotech.com
Magnet drive gear pump-motor units FG200/FG300 series
22
Flow [l/h-gph]
70
16
60
6
4
2
0
52
48
44
Flow [l/h-gph]
40
36
32
28
16
12
8
4
0
GPH
64
Flow [l/h-gph]
60
56
52
48
44
40
36
60
50
50
2V
40
2V
40
1V
30
30
1V
20
20
10
10
0
0
1
2
20
3
4
40
5
6
60
7
8
80
100
Output pressure [bar/PSI]
9
10
120
11
140
12
160
13
Flow
Power
160
4V
3V
5V
140
120
60
50
2V
40
60
30
1V
40
20
1V
20
0
0
0
1
2
3
20
4
40
10
6
5
60
80
Output pressure [bar-PSI]
7
100
8
120
9
140
100
Flow
225
Power
4V
175
4V
3V
3V
12
8
4
0
25
0
70
60
150
50
90
80
200
75
0
10 Bar
PSI
FG200-FG300 with 13 mm gears (0.9 ml/rev)
l/h
250
100
90
70
3V
80
20
PSI
80
2V
4V
100
125
Bar
100
5V
180
28
24
0
180
FG200-FG300 with 9 mm gears (0.6 ml/rev)
l/h
200
32
16
70
3V
3V
24
20
4V
5V
0
GPH
80
4V
12
8
90
Power
80
18
10
Flow
90
20
14
100
5V
Absorbed power [Watt]
24
FG200-FG300 with 4 mm gears (0.3 ml/rev)
l/h
100
Absorbed power [Watt]
26
2V
2V
50
40
30
1V
Absorbed power [Watt]
GPH
20
1V
10
0
2.0
3.0
3.5
4.0
4.5 Bar
2.5
60
PSI
30
40
50
pressure
Note: Characteristics with water at 20 °C (68) °F) and without relief valve, max vacuum 724 mmHg.Output
Use a filter
before[bar-PSI]
the pump inlet no larger than 10 micron. Temperature requirements different from
0.0
0
0.5
1.5
1.0
10
20
ambient temperature must be mentioned on the order. Different materials are available upon request.
Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use a filter before the pump inlet no larger than 10 micron.
Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
Fluid-o-Tech srl
Via Leonardo da Vinci, 40
20094 Corsico, Milano, Italy
Tel. +39 02 999501
Fax +39 02 99950999
[email protected]
Fluid-o-Tech Int’l Inc.
161 Atwater St.,
06479 Plantsville CT (USA)
Tel. +1 (860) 276-9270
Fax +1 (860) 620-0193
[email protected]
Fluid-o-Tech Int’l Inc. Japan
203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, Japan
Tel. +81 (0) (3) 3783-9660
Fax +81 (0) (3) 3783-9661
[email protected]
Fluid-o-Tech Asia
(Beijing)
Co., Ltd
Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRC
Tel. +86 (0) (10) 61684650
Fax +86 (0) (10) 61684651
[email protected]
FG200/FG300 en – 05/12 Ed.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement