E130DGSpec

E130DGSpec
SPECIFICATIONS
E130DG
TWO SPEED EXHAUST FAN
130 CFM/<0.3 Sones @ 0.10" SP.
113 CFM @ 0.25 SP. (Boost)
50 CFM/<0.3 Sones @ 0.10" SP.
123/4"
127/8"
• Grill
White, polymeric grill secured in place with torsion springs; easily
removed if necessary, dimensions - 141/4" x 141/4".
• Blower Wheel
6"
Balanced polymeric dual inlet blower wheel secured in place using a
hex nut.
97/8"
• Motor
Enclosed 4 pole high efficiency, permanently split capacitor motor
(PSC); life time lubrication, suitable for continuous operation. Motor
bearings - sleeve. Rated 115/120 volts, 60 Hz.
141/4"
• Fan Housing
141/4"
23 gauge galvanized steel housing. Overall dimensions:
127/8"x 123/4"x 97/8".
Acceptable for use over
tub or shower when
installed in a GFCI
protected branch circuit.
• Motion Sensor
Integrated motion sensor automatically turns fan to high speed when
room is occupied. Adjustable off delay from 30 seconds to 80 minutes.
• Duct Collar
6" round, zinc plated metal collar adapter. Gasketed, spring loaded
aluminum backdraft damper.
• Unit Mounting
The housing will mount through drywall thickness up to 3/4", with a
rough-in opening of 131/8" x 13". The housing will mount either
between 16" or 24" on center joists, using the 2 supplied housing
mounting brackets. The housing mounting brackets can be adapted
for overhead mounting (hardware not provided). The unit is provided
with an optionally installed ceiling flange to ensure proper building
infiltration rates are maintained and that no air leaks occur between
the fan housing and ceiling cutout.
• Electrical Connections
.5" electrical knockouts provided. Easy wiring access via either
internal or external wiring compartment cover.
• Single Pack Shipping Info
Box Dim: 20" x 157/8" x 113/8"
Shipping Weight: 17 lbs.
EXPANDED PERFORMANCE
Air Flow - CFM (High Speed)
Air Flow - CFM (Low Speed)
Static Pressure (inches of w.g.)
0.1
0.15
0.2 0.25* 0.3
130
117
104 89/113 71
50
27
-
0
153
85
0.35
51
-
Sones
@ .1 SP
Fan Speed
RPM
Maximum
Power Watts
Amps
<0.3
<0.3
812
736
37.0
0.3
* Boost speed provides 113 CFM @ .25 Static Pressure, 0.7 sones
PROJECT
ARCHITECT
LOCATION
ENGINEER
CONTRACTOR
SUBMITTED BY
CFM
IN
W.G.
RPM
WATTS
DE IN AMERIC
MA
A
MEE
TS
FAN
MODEL
NUMBER NUMBER
IRE
REQU
ME
N TS O A RRA
F
Specifications subject to change without notice.
AMPS
SONES
QTY
DATE
OPTIONAL EQUIPMENT
& REMARKS
Air King: 820 Lincoln Avenue
West Chester, Pennsylvania 19380-4466
Tel: (610) 692-7400 • 877-304-3785
Fax: (610) 696-8048
Updated 2-16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement