CENTURION Full Product Catalogue Electronic and Ancillary Devices

CENTURION Full Product Catalogue Electronic and Ancillary Devices
traffic
barriers
CONTROLLERS
AND
ANCILLARY
ELECTRONICS
Not only do we stock a range of intelligent controllers for
our own operators, but we even offer high-quality universal
controllers that can be used for a wide variety of applications.
In addition, our ancillary solutions are tailor-made to help
you get the most out of your installation.
All our controllers incorporate advanced onboard lightning
protection and diagnostics.
Product Code: CP75
CP77
DC Motor Controller
Product Code: CP77 / CP7724V
CP80
DC Motor Controller
Product Code: CP80D3/D5
CP87
DC Motor Controller
Product Code: CP87
Electronic controller for use with the R3 and R5 range of
rotary swing gate operators.
An incredibly versatile DC controller that can be used with a
wide variety of swing and sliding gate operators, including
Beninca, FAAC, SupaSlida and AutoMate.
Electronic controller for use with the D3 and D5 range of
sliding gate operators.
A basic single-channel DC controller for use with sliding
and swing gate operators.
Main Features
Main Features
Main Features
Main Features
• Adjustable Autoclose timer – gate is never left open
unnecessarily
• Proven lightning protection
• Proven lightning protection
• Proven lightning protection
• High immunity to noise – not affected by external
interference
• Trigger input with local test button– useful for testing
the operation of the device when a transmitter is not
available
• Reliable position control via limit switches
• Diagnostic LEDs for easy programming
• Dedicated Pillar Light Relay
• The following onboard inputs and outputs are provided:
• Free-exit input
• Trigger input
• Micro-controller platform allows customisation – improved
versatility
• Trigger input with local test button – useful for testing the
operation of the device when a transmitter is not available
• Solenoid lock connection
• Pedestrian Opening input - prevents unauthorised vehicle
access
• 12V DC output for auxiliary devices such as external
receivers, gate Safety Beams, etc.
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated system
• Input for infrared Safety Beams
• Local and remote multi-function Gate Status LED
• Pedestrian Opening input
• Free-exit input (only opens gate) – ideal for fitting free-exit
ground loops or pushbuttons in townhouse and highvolume vehicle access applications
• Dedicated Holiday Lockout input
• Fuse-protected
• Holiday Lockout input – ensures that gate cannot be
opened when homeowners are away
• Timed potential-free contact (e.g. Courtesy Lights)
• Low-voltage switching of potential-free contact
• Selectable/adjustable Autoclose timer (5 – 45 seconds)
• Override of Autoclose timer via trigger input
• Pedestrian Opening input - prevents unauthorised
vehicle access
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated
system
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
CP75
DC Motor Controller
• Pedestrian Opening input - prevents unauthorised
vehicle access
• 12V DC output for auxiliary equipment such as an
external radio receiver
• Local and remote multi-function Gate Status LED
• Free-exit input (only opens gate) – ideal for fitting freeexit ground loops or pushbuttons in townhouse and
high-volume vehicle access applications
• Holiday Lockout input - ensures that gate cannot be
opened when home owners are away
• Timed potential-free contact (e.g. Courtesy Lights)
• Low-voltage switching of potential-free contact
• Selectable/adjustable Autoclose timer
(1 – 255 seconds)
CP75A
DC Motor Controller
Product Code: CP75A
An electronic interface for communicating with the
master controller when a second R3/R5 rotary swing gate
operator is installed.
• Override of Autoclose timer via trigger input
• Local diagnostic LEDs for easy programming
• Local diagnostic LEDs for easy programming
• Available in 12V and 24V DC variants
ELECTRONIC
CONTROLLERS
& ANCILLARY DEVICES
www.CentSys.com
page 163
Product Code: CP88
CP91
AC Motor Controller
Product Code: CP91
CP93
CP201
Dual AC Motor Controller
AC Motor Controller
Product Code: CP93
Product Code: CP201V3
Electronic controller for use with the CENTRY DC-operated
traffic barrier.
The CP91 AC controller is a versatile controller designed
to drive single-phase 220V AC motor systems. Reliability
is enhanced through comprehensive surge and lightning
protection, high noise-immunity and zero cross-switching.
The CP93 Dual AC controller is a controller card designed
to control a pair of gates driven by AC induction motors in
various configurations.
Electronic controller for use with the A10 industrial sliding
gate operator.
Main Features
Main Features
Main Features
Main Features
• Onboard sensitivity adjustment
• Proven lightning protection
• High immunity to noise – not affected by external
interference
Designed to allow full control of a set of double swing
gates that interleave, irrespective of the operator, and
with or without the use of limit switches.
• Proven lightning protection
• Inductive Loop Detector input
• Safety Beam input for fitting additional safety devices
• Selectable Autoclose – ensures that gate is never left open
unnecessarily
• Local diagnostic LEDs for easy programming
CP200
Inverter Module
Product Code: CP200EV3
• Micro controller platform allows customisation – improved
versatility
• Trigger input with local test button – useful for testing the
operation of the device when a transmitter is not available
• Installer User Interface allows full customisation of the
various programming features
• Adjustable relay switching time to prevent relay
contact arcing
• Pedestrian Opening input - prevents unauthorised vehicle
access
• Trigger input with local test button – useful for testing
the operation of the device when a transmitter is not
available
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated system
• Pedestrian Opening input - prevents unauthorised
vehicle access
• Local and remote multi-function Gate Status LED
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated
system
• Free-exit input (only opens gate) – ideal for fitting free-exit
ground loops or pushbuttons in townhouse and highvolume vehicle access applications
• Timed potential-free contact (e.g. Courtesy Lights)
• Low-voltage switching of potential-free contact
• Selectable/adjustable Autoclose timer (5 - 40 seconds)
• Override of Autoclose timer via trigger input
• Local diagnostic LEDs for easy programming
• 12V DC auxiliary supply at 150mA
• High immunity to noise – not affected by external
interference
• Trigger input with local test button – useful for testing
the operation of the device when a transmitter is not
available
• Pedestrian Opening input – prevents unauthorised
vehicle access
• Safety Beam input – connecting infrared Safety Beams
dramatically increases the safety of the automated
system
• Local and remote multi-function Gate Status LED
• Free-exit input (only opens gate)
• Timed potential-free contact (e.g. Courtesy Lights)
• Local and remote multi-function Gate Status LED
• Low-voltage switching of potential-free contact
• Free-exit input (only opens gate) – ideal for fitting freeexit ground loops or pushbuttons in townhouse and
high-volume vehicle access applications
• Selectable/adjustable Autoclose timer
(1 - 255 seconds)
• Timed potential-free contact (e.g. Courtesy Lights)
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
CP88
DC Motor Controller
• Override of Autoclose timer via trigger input
• Low-voltage switching of potential-free contact
• Local diagnostic LEDs for easy programming and
diagnostics
• Selectable/adjustable Autoclose timer
(1 - 255 seconds)
• 12V DC auxiliary supply connecting Safety Beams,
external receivers, keypads, etc.
• Override of Autoclose timer via trigger input
• Local diagnostic LEDs for easy programming
• 12V DC auxiliary supply for connecting Safety Beams,
external receivers, keypads, etc.
ELECTRONIC
CONTROLLERS
& ANCILLARY DEVICES
The Inverter rectifies the 230V AC input into 310V DC while
also changing the single-phase input into the three-phase
supply needed to operate the A10 electric motor.
www.CentSys.com
page 165
D5-Evo & D5-Evo Low-Voltage
DC Motor Controller
Product Code: D2 Turbo: D2TC-D00V1
DC Motor Controller
D2 Turbo Low-Voltage: D2TC-D0LV1
Product Code: D5CC-D00V1
The exceptionally user-friendly interface used to configure the D2 Turbo domestic sliding gate operator, complete with charger and
onboard CENTURION code-hopping multichannel receiver. The twin dial-system makes setting up and commissioning veritable
child’s play.
The D2 Turbo Low-Voltage controller has an input voltage range of 10V - 20V AC/10V - 28V DC, which means that it can be
powered using a step-down transformer mounted in the house and fed via inexpensive low-voltage cables.
Main Features
• Fully-sealed plastic housing to prevent ingress of dirt and
insects
This cost-effective light-industrial sliding gate operator for gates weighing up to 500kg enables you to enjoy all the amazing
features and functionality of the flagship D5-Evo – even if you don’t have mains power at the gate. All that is needed to
breathe life into the feature-rich LCD controller is a low-voltage input, easily obtainable via a step-down transformer and
dramatically reducing installation costs.
The D5-Evo Low-Voltage controller has an input voltage range of 15V - 19V AC, which means that it can be powered using
a step-down transformer mounted in the house and fed via inexpensive low-voltage cables.
Main Features
• Onboard multichannel CENTURION code-hopping receiver
with the ability to learn remote control buttons to specific
functions (e.g. Gate trigger, Pedestrian Opening, Holiday
Lockout)
• Fully-sealed plastic housing for controller to prevent
ingress of dirt and insects
• Removable connectors for easy maintenance
• Low-voltage AC or DC input – ideal for sites with no mains
power at the gate 1
• Removable connectors on controller for easy
maintenance
• Watchdog IC ensures full and safe operation of the controller
• No need to fit costly isolator
• Watchdog IC ensures full and safe operation of controller
• Easy setup using the Function and Setting Dials and the
pushbutton
• Optional Backup Memory Module allows backing up of all
the information that has been set up in the system
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
D2 Turbo & D2 Turbo Low-Voltage
1
• Easy setup of controller using LCD interface
• Optional Backup Memory Module allows backing up of
all the information that has been set up in the system
1. Applies to D2 Turbo Low-Voltage only
• Full configuration of gate operating parameters,
including independent gate opening and closing speeds,
ramp-up and ramp-down distances and crawl speed
• Positive Close Mode (e.g. ensure activation of electric
fence contact switch)
• Onboard multichannel CENTURION code-hopping
receiver with the ability to:
• Learn transmitter buttons to specific functions
(e.g. Gate trigger, Pedestrian Opening, Free-exit,
Pillar Light Control, Holiday Lockout)
• Opening and Closing Safety Beam inputs with Beam Circuit
functional test
• Opening and Closing Safety Beam inputs with Beam
Circuit functional test
• High-security cleared beam Autoclose, in conjunction with
Safety Beams (PIRAC)
• High-security cleared beam Autoclose, in conjunction
with Safety Beams (PIRAC)
• Multiple Modes of Operation: Standard Mode, Open Only
Mode, Reversing Mode, and two with operator Pre-flashing
Modes
• Break-in and Ambush Alarm (a world first) with
configurable outputs via onboard buzzer, Pillar Light
Relay, etc.
• Automatic closing with adjustable time delay, and
pushbutton override
• Multiple Modes of Operation: Standard Mode,
Condominium Mode (multi-user), Reversing Mode, PLC
and Deadman Control Mode
• Integrated ChronoGuard (a world first) with Real Time
Clock and Calendar timer offering multichannel
time-activated and time-barring functionality
• Automatic closing with adjustable time delay, and
pushbutton override
• Auxiliary output can be configured via the ChronoGuard
timer to provide timer functionality to external devices,
such as security lights, entrance fountain, etc.
• Remote Gate-status Indicator (gate position, power failure,
low battery, multiple collision detection and Pillar Light Status
indication)
• Pedestrian Opening
• Remote Gate-status Indicator (gate position, power
failure, low battery, multiple collision detection and Pillar
Light Status indication)
• Holiday Lockout
• Courtesy/Pillar Light (Fixed duration), with pre-delays and
two Pre-flashing Modes
• Pedestrian Opening
• Free-exit facility
• Selectable gate speed modes – Low Speed/High Speed
(High Speed is the default)
• Selectively delete specific transmitters that have been
lost or stolen
• Automatically learn transmitters into the system
(Autolearn)
• Automatically delete transmitters that are no longer in
use (Delete-Not-Present)
• Low-voltage AC or DC input – ideal for sites with no
mains power at the gate 1
• No need to fit costly isolators
1
1. Applies to D5-Evo Low-Voltage only
• Holiday Lockout – configurable as Emergency Stop
• Positive Close Mode (e.g. ensure activation of electric fence
contact switch)
• Courtesy/Pillar Light (fixed duration), with pre-delays and
two Pre-flashing Modes
• Multiple Operating Profiles to suit region of installation –
select between ZA, CE, etc.
www.CentSys.com
ELECTRONIC
CONTROLLERS
& ANCILLARY DEVICES
page 167
V-Series Controller
Product Code: D10C-D00V2
Product Code: VECC-D00V3
DC Motor Controller
Using CENTURION’s proven 24V DC technology, this is the complete solution for commercial and industrial gates up to 1000kg.
A rock-solid die-cast aluminium gearbox and reliable battery backup make the D10 ideally suited for complexes with large gates
and high traffic volumes, while an intelligent LCD controller with multiple Modes of Operation makes setup and diagnostics
veritable child’s play.
There is virtually no limit to the capabilities of our swing gate operators; combining industry-leading functionality, worldclass reliability and ease of installation, CENTURION swing gate operators truly are in a league of their own, with an
intelligent logic controller.
Main Features
Main Features
• Fully-sealed plastic housing for controller to prevent ingress
of dirt and insects
• Multiple Operating Profiles to suit region of installation –
select between ZA, CE, etc.
• Separate weatherproof housing for dual-channel
controller, battery and charger
• Advanced Positive Close Mode ensuring the gate remains
closed in a secure, rigid position
• Easy setup of controller using LCD interface
• Full configuration of gate operating parameters, including
independent gate opening and closing speeds, ramp-up and
ramp-down distances and crawl speed
• Fully-sealed plastic housing for controller to prevent
ingress of dirt and insects
• Multiple Operating Profiles to suit region of installation –
select between ZA, CE, etc.
• Easy setup of controller using LCD user interface
• Pedestrian Opening (adjustable opening and Autoclose
time)
• Removable connectors on controller for easy maintenance
• Watchdog IC ensures full and safe operation of controller
• Optional Backup Memory Module allows backing up of all
the information that has been set up in the system
• Opening and Closing Safety Beam inputs with beam circuit
functional test
• Positive Close Mode (e.g. ensure activation of electric fence
contact switch)
• Onboard multichannel CENTURION code-hopping receiver
with the ability to:
• Removable connectors on controller for easy
maintenance
• Watchdog IC ensures full and safe operation of controller
• Onboard multichannel CENTURION code-hopping
receiver with the ability to:
• Remote Gate Status Indicator (gate position, power
failure, low battery, multiple collision detection and Pillar
Light status indication)
• Courtesy/Pillar Light Timer with adjustable time)
• High-security cleared beam Autoclose, in conjunction with
Safety Beams (PIRAC)
• Learn transmitter buttons to specific functions (e.g. Gate
trigger, Pedestrian Opening, Free-exit, Pillar Light Control,
Holiday Lockout)
• Break-in and Ambush Alarm (a world first) with configurable
outputs via onboard buzzer, Pillar Light Relay, etc.
• Selectively delete specific transmitters that have been lost
or stolen
• Learn transmitter buttons to specific functions (e.g.
Gate trigger, Pedestrian Opening, Free-exit, Pillar Light
Control, Holiday Lockout)
• Multiple Modes of Operation: Standard Mode, Condominium
Mode (multi-user), Reversing Mode, PLC and Deadman
Control Mode
• Automatically learn transmitters into the system
(Autolearn)
• Selectively delete specific transmitters that have been
lost or stolen
• High-security cleared-beam Autoclose in conjunction
with Safety Beams (PIRAC)
• Automatically delete transmitters that are no longer in use
(Delete-Not-Present)
• Automatically learn transmitters into the system
(Autolearn)
• Break-in and Ambush Alarms (a world first) with
configurable outputs via onboard buzzer, Pillar Light
Relay, etc.
• Automatic closing with adjustable time delay, and
pushbutton override
• Remote gate-status indicator (gate position, power failure,
low battery, multiple collision detection and Pillar Light Status
indication)
• Pedestrian Opening
• Integrated ChronoGuard (a world first) with Real Time Clock
and Calendar timer offering multichannel time-activated and
time-barring functionality
• Auxiliary output can be configured via the ChronoGuard
timer to provide timer functionality to external devices, such
as security lights, entrance fountain, etc.
• Automatically delete transmitters that are no longer in
use (Delete-Not-Present)
• Multiple Modes of Operation, including Standard Mode
and Condominium Mode (multi-user)
• Holiday Lockout – configurable as Emergency Stop
• Full configuration of gate opening parameters, including
independent gate opening and closing speeds, rampup and ramp-down distances and end-of-travel crawl
distance
• Courtesy/Pillar Light (fixed duration), with pre-delays and
two Pre-flashing Modes
• Automatic Closing with adjustable time, pushbutton
override and selectable according to gate status
• Free-exit facility
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
D10
DC Motor Controller
• Fully configurable pre-delays with Pre-flashing Modes
• Opening and Closing Safety Beam inputs with beam
circuit functional test
• Free-exit facility
• Advanced solenoid or magnetic gate-lock release pulse
• Selectable leaf delay on either gate leaf
www.CentSys.com
ELECTRONIC
CONTROLLERS
& ANCILLARY DEVICES
page 169
Memory Module
Product Code: SECC-D00V1
Product Code: PCA12201V1.0 (for D-Series Controllers); CP108 (for
SMARTGUARD/air keypad); PCA11667V1 (for Lattice Controller)
Controller
CP78
Backup Memory Module
Multi-LED Driver PCB
Available in three variants, the Memory Module is used to
create a backup of the onboard memory of all D-Series
controllers (except VECTOR2), SMARTGUARD and
SMARTGUARDair keypads, and the Lattice Controller. During
a backup, the entire memory of the controller is backed up,
including all settings and remote controls. In the case of the
D-Series controllers equipped with ChronoGuard, all Timeperiods that have been set, will also be backed up. This
backup can then be used to restore the memory contents in
the event that the controller has to be replaced.
The CP78 can be used to power multiple LEDs connected
in parallel, and can also be employed for interlocking
two operators. Most controllers provide only 4.5V on
the LED output and can therefore power a maximum of
three LEDs; however, the CP78 uses 12V DC to switch
a relay via a transistor input and can provide power to
an unlimited number of LEDs. This is especially useful in
multi-user intercom applications comprising numerous
handsets, where each handset requires a gate status LED.
Product Code: CP78
Traffic barriers offer a formidable means of controlling vehicular access, and we have gone to great lengths to ensure that with
the intelligent LCD controller CENTURION barriers are easy to set up and can handle the heaviest of traffic volumes while
simultaneously offering superior security and a myriad features.
CP76
Relay Rectifier PCB
Product Code: CP76
CP79V2
Universal Timer Board/Pulse-stretcher
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
SECTOR / CLAWS
Product Code: CP79V2.0
Main Features
• Fully-sealed plastic housing for controller to prevent ingress
of dirt and insects
• Multichannel controller with integrated ChronoGuard timer
technology (a world first):
• Easy setup of controller using LCD interface
• Free-exit facility
• Removable connectors on controller for easy maintenance
• Remote boom pole status indicator (pole position, power
failure, low battery, multiple collision detection and
security light status indication)
• Watchdog IC ensures full and safe operation of controller
• Optional Backup Memory Module allows backing up of all
the information that has been set up in the system
• Standard plug-in bases pre-configured for approved 12V DC
closing and free-exit inductive loop detectors
• Adjustable and removable controller mounting tray for easy
wiring and commissioning
• Barrier Raise and Lower inputs
• Courtesy/Pillar Light Timer with adjustable duration
• Fully configurable pre-delays with Pre-flashing Modes
• Safety/Closing Beam input with Beam Circuit function test
• Lock/Emergency Stop input
• Ticket Vend Interlock which enables connectivity to a ticket
vending machine
• Memory and non-memory barrier activation
A useful and versatile card which can be used in many
access control applications. Its purpose is to convert a 12V
AC or DC voltage signal to a potential-free (voltage-free)
contact.
Typical applications include:
• Converting the 12V AC output signal from an intercom
(that is normally used for powering a strike lock), into
a voltage-free contact that can be used to trigger a
gate operator, a garage door operator, etc.
• Onboard multichannel CENTURION code-hopping receiver
with the ability to:
• Learn transmitter buttons to specific functions (e.g. Gate
trigger, Pedestrian Opening, Free-exit, Pillar Light Control,
Holiday Lockout)
• Converting the open-collector outputs found on the
CENTURION SupaSMART, SupaNOVA, SMARTGUARD
(air) keypad, SOLO or Lattice proximity tag reader to a
potential-free contact
• Selectively delete specific transmitters that have been lost
or stolen
This is a handy timer card, which can be used in many
access control applications. A trigger input will latch the
output for a variable time.
Typical applications include:
• Activating a continuous door strike
• Releasing a magnetic lock
• Driving a cooling fan
• Pillar Lights
• Alarms
• Automatically learn transmitters into the system
(Autolearn)
• Automatically delete transmitters that are no longer in use
(Delete-Not-Present
• Full configuration of barrier operating parameters including
independent pole raise and lowering speeds, ramp-up and
ramp-down angles
• Automatic lowering
• Multiple Operating Profiles to suit region – select between
ZA, CE, etc.
www.CentSys.com
ELECTRONIC
CONTROLLERS
& ANCILLARY DEVICES
page 171
Product Code: CP102
The CP102 allows the user to seamlessly synchronise
two operators by providing a common trigger. Once the
trigger signal is applied, both operators will run in perfect
synchronicity. This is useful on sites with extremely wide
driveways where two automated gates close towards each
other.
CP107
CS2
Surge Suppression Card
Product Code: CS2
The CS2 has been designed to electronically clamp down
voltage spikes caused by lightning and power surges, thereby
minimising the damage to electronic equipment that usually
ensues following such an overvoltage condition.
CL12
Battery Saver Module
Mains Supply Surge Limiter
The CP107 is designed to prevent your 12V lead-acid battery
from going below 10.6V during a mains power failure.
Should the battery voltage drop to 10.6V during a mains
power failure, the CP107 automatically disconnects the
battery from the load circuitry. Once mains power is restored
the battery saver automatically resets, allowing your battery
to recharge to full capacity.
Protect your gate motor’s electronics by fitting a mains supply
surge limiter upstream. The CL12 ‘clamps’ high voltages and
offers effective protection against lightning and power surges.
Product Code: CP107
Product Code: CL12-00370
ELECTRONIC CONTROLLERS
& ANCILLARY DEVICES
CP102
Dual Sliding Gate Motor Sync Card
The CP107 is supplied with colour-coded wiring and preattached lugs, making it quick and easy to connect to any
12V system. Once connected, the CP107 is small enough to
be tucked away inside the various CENTURION enclosures.
www.CentSys.com
page 173
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement