MODULAR CONTAINED AISLE CONTEG DATA SHEET for the next decade! CONTEG SOLUTIONS

MODULAR CONTAINED AISLE CONTEG DATA SHEET for the next decade! CONTEG SOLUTIONS
CONTEG SOLUTIONS
for the next decade!
CONTEG DATA SHEET
version: 10-02-2011
TOTAL SOLUTIONS FOR DATA CENTERS
MODULAR CONTAINED AISLE
Local Offices:
CONTEG, spol. s r.o.
Headquarters Czech Republic:
Na Vítězné pláni 1719/4
140 00 Prague 4
1
Tel.: +420 261 219 182
Fax: +420 261 219 192
[email protected]
www.conteg.com
Austria:
Benelux:
Eastern Europe:
France: Germany:
Russia:
+43 699 1819 7071
+32 477 957 126
+49 172 848 4346
+33 686 074 386
+49 170 523 4958
+7 495 967 3840
...to complete your network
CONTEG SOLUTIONS
for the next decade!
Modular Contained Aisle can be applied in almost all existing data centers
which use standard Hot/Cold layout. This solution is applicable on:
• Racks or other IT equipment of any vendor with any dimension (up to
the height of 2350mm)
• Rows of racks with gaps (missing racks in the row)
• Hot/Cold aisles with width up to 1200mm and 1800mm
MAIN BENEFITS:
• Reduction of hot and cold air mixing by eliminating cold air by-passes
• Solution does not require equipment shut down to retro-fit in operating
data centers
• Product allows achieving lower air inlet temperatures to IT equipment
• Product allows higher return air temperature to CRAC units that result
in an increase of net sensible cooling capacities
• Product provides balanced air distribution along the entire rack
elevation, due to this the equipment in higher sections of the cabinets
is cooled more effectively
• Increase of energy efficiency - regardless of the room size or number of
installed racks
• Self-supporting frame construction together with PVC blinds (can be
easily cut off to the required length) = stability and modularity
DESCRIPTION:
• Solution available for all IT and other equipment up to 2350mm (up
to 48U racks), minimal requested ceiling height is 2600mm
• Ready to cover aisles up to 1200mm or 1800mm wide
• Fixed and adjustable top sections to adapt the solution to the aisle on
any length
• Top sections made of transparent, fire retardant Polycarbonate
materials
• Hollow or clear polycarbonate available-both sides
• PVC blinds made of transparent fire retardant PVC anti-static material
• Available in version with double doors as well as with PVC blinds
instead of doors
• Frame and supporting sections made of powder coated sheet steel
MODULAR CONTAINED AISLE - PARTS
Code
DOOR SECTION
Description
CA-MDS-120B
CA-MDS-120D
CA-MDS-180B
CA-MDS-180D
Door section with PVC blinds, with 120mm
Door section with double door, with 1200mm
Door section with PVC blinds, with 120mm
Door section with double door, with 1200mm
ROOF SECTION - HOLLOW POLYCARBONATE
CA-MRS-90
CA-MRS-90A
CA-MRS-90/180
CA-MRS-90A/180
Top cover without side section, hollow polykarbonate (slightly opaque), 900mm lenght, fix, width of aisle 1200mm, RAL 7035 or 9005
Top cover without side section, hollow polykarbonate (slightly opaque), range of the lenght 20-880mm, width of aisle 1200mm,
RAL 7035 or 9005
Top cover without side section, hollow polykarbonate (slightly opaque), 900mm lenght, width of aisle 1800mm, fix, RAL 7035 or 9005
Top cover without side section, hollow polykarbonate (slightly opaque), width of aisle 1800mm, range of the lenght 20-880mm,
RAL 7 035 or 9005
ROOF SECTION - CLEAR POLYCARBONATE
CA-MRSC-90
CA-MRSC-90A
Top cover without side section, clear polykarbonate, 900mm lenght, fix, width of aisle 1200mm, RAL 7035 or 9005
Top cover without side section, clear polykarbonate, range of the lenght 20-880mm, width of aisle 1200mm, RAL 7035 or 9005
SIDE SECTION (package for one sideof roof section including support system)
CA-MSS-55
CA-MSS-95
CA-MSS-250B
2
Side blinds for CA-MRS or CA-MRSC – one side. Length 550 mm (for racks height 42U or 1980mm or higher), with support
bracket (threaded rod and bracket for fixing on the rack)
Side blinds for CA-MRS or CA-MRSC – one side. Length 950 mm (for racks height 33U or 1580mm or higher), with support
bracket (threaded rod and bracket for fixing on the rack)
Blinds for CA-MRS or CA-MRSC – one side. Length 2500 mm (for gap between racks, at the floor), with support column
www.conteg.com
...to complete your network
:: modular contained aisle
Cabinets from different manufacturers of varying heights, widths and depths are added to
existing installations without any consideration that one day might be required to roof the area
that is being supplied by cooled air. Modular Contained Aisle for traditional hot/cold aisle layouts
is the right containment solution when higher cooling efficiency is needed, but the rack infrastructure
cannot be changed and fitting the standard contained aisle is limited for any reason.
CONTEG SOLUTIONS
for the next decade!
Door section with blinds
:: modular contained aisle
• Self-supporting door frame, base of columns comprises holes for anchoring
screws (screws are not part of delivery)
• PVC blinds are used to seal the door space, length 2500mm; blinds are
transparent, fire retardant, made of PVC anti-static materials compliant with EN
ISO 13501-1 for all PVC parts
• Brush used to seal the space between door frame and rack
• Compatible with all CONTEG racks – if lateral rack of the aisle is CONTEG
PREMIUM or OPTIMAL rack, we recommend to connect the frame to the rack
using DP-DR-UNI (ordered separately)
• Possible to use for almost any type of rack, CRAC/CRAH or other IT equipment
of any vendors – no connection to the rack is needed due to the section’s selfsupporting construction
• Can be combined with door section with double door on opposite side
• Two sizes for aisles width 1200 and 1800mm
Note: double door provide better efficiency of sealing than blind strips
Code
Dimensions including packing in mm
Gross weight in kg
H
W
D
CA-MDS-120B
140
495
2510
44
CA-MDS-180B
140
495
2510
56
Door section with double door
• Self-supporting door frame, base of columns comprises holes for anchoring
screws (screws are not part of delivery)
• Door section contains frame for double door fitting
• Double door part of delivery
• Brush used to seal the space between door frame and rack
• Compatible with all CONTEG racks – if lateral rack of the aisle is CONTEG
PREMIUM or OPTIMAL rack, we recommend to connect the frame to the rack
using DP-DR-UNI (ordered separately)
• Possible to use for almost any type of rack, CRAC/CRAH or other IT equipment
of any vendors – no connection to the rack is needed due to the section’s selfsupporting construction
• Can be combined with door section with blinds on opposite side
• Two sizes for aisles width 1200 and 1800mm (for 1800 mm with infil panel and
extension kits)
Note: double door provide better efficiency of sealing than blind strips
Code
Dimensions including packing in mm
H
W
D
Gross weight in kg
for more information contact
our product department
CA-MDS-120D
CA-MDS-180D
Top section with fixed size
• Hollow polycarbonate panel (CA-MRS-90, CA-MRS-90/180)
• Transmittance 82%
• Light-weight
• Easy cleaning
• Clear polycarbonate panel (CA-MRSC-90)
• Transmittance 100%
• Heavy-weight
• Please note, that clear polycarbonate is prone to scratches
• Top part of the modular contained aisle
• Fixed length 900mm
• For modular contained aisle width 1200mm and 1800mm (only hollow
polycarbonate panel)
• Minimally two top sections with fixed size per modular contained aisle required
• Drilling on site possible - enable to lead sprinklers of fire suspension system
through the panel into the space of contained aisle
• Can be connected with the adjacent door or other top section (fixed as well as
adjustable)
• Section is compatible with PVC blinds of any length (ordered separately)
• Ready to accept supporting elements (supporting element is part of delivery of
PVC blinds)
Dimensions including packing in mm
Code
Gross weight in kg
H
W
D
3
CA-MRS-90
80
870
1305
10
CA-MRS-90/180
80
870
1905
15
CA-MRSC-90
80
870
1305
16
www.conteg.com
...to complete your network
CONTEG SOLUTIONS
for the next decade!
Top section with adjustable size
• Hollow polycarbonate panel (CA-MRS-90A, CA-MRSC-90A/180)
• Transmittance 82%
• Light-weight
• Easy cleaning
:: modular contained aisle
• Clear polycarbonate panel (CA-MRSC-90A)
• Transmittance 100%
• Heavy-weight
• Please note, that clear polycarbonate is prone to scratches
• Top part of the modular contained aisle
• Length range from 20 to 880mm, fluent sliding
• For modular contained aisle width 1200mm and 1800mm (only hollow
polycarbonate panel)
• One top section with adjustable size per modular contained aisle required
• Drilling on site possible - enable to lead sprinklers of fire suspension system
through the panel into the space of contained aisle
• Can be connected with the adjacent fixed size top sections only
• Section is compatible with PVC blinds of any length (ordered separately)
• Ready to accept supporting elements (supporting element is part of delivery of
PVC blinds)
• Always need to be use one piece on one aisle
Code
Dimensions including packing in mm
Gross weight in kg
H
W
D
CA-MRS-90A
80
870
1305
13
CA-MRS-90A/180
80
870
1905
18
CA-MRSC-90A
80
870
1305
19
PVC blinds - CA-MSS-55, CA-MSS-95, CA-MSS-250B
• Three different types of PVC blinds:
• length 550mm for the racks height 42U (1980mm) or higher (CA-MSS-55)
• length 950mm for the racks height 33U (1580mm) or higher (CA-MSS-95)
• length 2500mm for the gap between two racks (CA-MSS-250B)
• Made of transparent, fire retardant, PVC anti-static material compliant with EN
ISO 13501-1
• All types of blinds can be easily cut off to the required length and shape
• One set of blinds required for each side of any (fixed or adjustable) section designed for 40% overlap of neighboring blinds
• Set of blinds contains an appropriate supporting element (type and length of
supporting element depends on length of blinds)
• Supporting element can be placed on the top part of the equipment and fixate.
• Fixation can be enhanced by a screw or glue
• Compatible with ALL top sections
Code
Dimensions including packing in mm
Gross weight in kg
H
W
D
CA-MSS-55
50
210
960
CA-MSS-95
50
210
960
4
CA-MSS-250B
110
210
2490
13
4
EXAMPLE OF CONFIGURATIONS
CA-MDS-120B
CA-MRS-90
CA-MRS-90A
CA-MSS-55
CA-MSS-95
CA-MSS-250B
CA-MDS-180B
CA-MRS-90/180
CA-MRS-90A/180
4
Aisle 1200mm
- length 5m,
standard 42U
racks
Aisle 1200mm
- length 8m,
standard 42U
racks
2
5
1
12
2
8
1
18
www.conteg.com
Aisle 1200mm
- length 8m,
mixed racks
42U and 33U
racks (half to
half)
2
8
1
9
9
Aisle 1200mm
- length 8m,
racks 42U and
missing 3 racks
Aisle 1800mm
- length 8m,
standard 42U
racks
Aisle 1800mm length 8m, mixed
racks 42U and 33U
racks (half to half)
2
8
1
15
18
9
9
2
8
1
2
8
1
3
...to complete your network
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement