VGG644805-6UFLWI preliminary rev1
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
2
1. Table of Contents
No.
Contents
Page
1
Table of Contents
2
2
Record of Revisions
3
3
Module Numbering System
4
4
Application
5
5
Features
5
6
General Specifications
5
7
Absolute Maximum Ratings
6
8
Electrical Characteristics
7
9
Block Diagram
9
10
Input / Output Terminals Pin Assignment
10
11
Interface Timing
15
12
Optical Characteristics
18
13
Reliability Test
21
14
Packaging
22
15
Precautions
23
16
Outline Drawing
24
17
Definition of Labels
25
18
Incoming Inspection Standards
27
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
3
2. Record of Revisions
Rev.
1
Comments
Preliminary Specification was first issued
Page
Date
All
11/7’14
MODEL NO.
EVERVISION
VGG644805-6UFLWI
3. Module Numbering System
V G G 6448 05 – 6 U F L W I
PAGE
SPEC ONLY
4
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
5
4. Application
This specification is applied to the 5.7 inch VGA supported TFT-LCD module, and
can display true 262,144 colors(6 bit/ color). The module is designed for OA, Car TV
application and other electronic products which require flat panel display of digital signal
interface. This module is composed of a 5.7”TFT-LCD panel, a driver circuit and
backlight unit. and used as the input devices for general electric appliances via both
finger and Capacitive stylus pen.
5. Features
- VGA (640×480 pixels) resolution.
- Digital 18 bit parallel RGB.
- Dot inversion mode with stripe type.
- LED drive circuit is built in this module to provide PWM Dimmer function
- Ultra Wide View Polarizer
- Projected Capacitive Touch
USB Interface
Multi Touch (Ten points)
6. General Specifications
Item
Screen Size
Display Format
Active Area
Dot Size
Pixel Configuration
Display Mode
Specifications
5.7 (Diagonal)
640RGB(H)×480(V)
115.2(H)×86.4(V)
0.060(H)×0.180(V)
RGB Vertical Stripe
TN Type
Transmissive Mode
Unit
inch
dot
mm
mm
-
Normally White
Surface Treatment
Viewing Direction
Outline Dimension
Weight
RoHS Compliance
Clear(7H)
6 O’clock
(The Gray Inversion will appear at this direction)
144.0(W)×104.6(H)×14.6(D)
194
Evervision certifies this product to be in
compliance with European Union Directive
2011/65/EU on the restriction of certain hazardous
substances in electrical and electronic equipment.
mm
g
-
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
6
7. Absolute Maximum Ratings
7.1 Absolute Ratings of Environment
Item
Symbol
Value
Min.
Max.
Unit
Note
Storage Temperature
TST
-30
+80
°C
(1)(2)
Operating Temperature
TOP
-20
+70
°C
(1)(2)
Note1: Background color changes slightly depending on ambient temperature.
This phenomenon is reversible.
Note2: Please refer to item of RELIABILITY.
7.2 Electrical Absolute Ratings
7.2.1 TFT-LCD Module
(Ta=25±2°C, GND=VSS=0V)
Item
Symbol
Digital Power Supply Voltage
VCC
Value
Min.
Max.
-0.3
4.3
Unit
Note
V
-
7.2.2 LED Driver Absolute Maximum Ratings
(Ta=25±2°C)
Item
Symbol
LED Driver Supply Voltage
LED Driver PWM
Value
Unit
Note
17
V
(1)
6
V
(1)
Min.
Max.
VLED
-0.3
PWM
-0.3
Note (1) Permanent damage to the device may occur if maximum values are
exceeded or reverse voltage is loaded.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
7
8. Electrical Characteristics
8.1 TFT-LCD Module
(Ta=25±2°C)
Item
Symbol
Value
Min.
Typ.
Max.
Unit
Note
Power Supply Voltage
VCC
3.0
3.3
3.6
V
-
Input High Threshold Voltage
VIH
0.7VCC
-
VCC
V
-
Input Low Threshold Voltage
VIL
0
-
0.3VCC
V
-
Current dissipation
ICC
-
140
196
mA
-
Power Consumption
PL
-
0.462
0.504
W
(1)
Frame Frequency
FV
-
60
-
Hz
-
DCLK
-
25.175
-
MHz
-
Dot Clock
Note (1) The specified power consumption is under the conditions at VCC=3.3V,
FV=60Hz, whereas a power dissipation check pattern below is displayed.
Black Pattern / 0 Gray
Active Area
8.2 LED Driver Unit
(Ta=25±2°C)
Item
Symbol
Voltage of LED Driver Unit
Value
Unit
Note
12.6
V
-
180
252
mA
B/L=200mA
-
130
182
mA
B/L=150mA
ILED(DU)
-
80
112
mA
B/L=100mA
Dimmer signal Low voltage
VPWML
-
-
0.2
V
-
Dimmer signal High voltage
VPWMH
4
5.0
5.5
V
-
Dimmer frequency
fPWM
-
120
-
Hz
-
PWM Pulse width
TPWMH
10
us
-
LED Life Time(25 )
-
40000
hr
-
Min.
Typ.
Max.
VLED(DU)
11.2
12.0
Current of LED Driver Unit
ILED(DU)
-
Current of LED Driver Unit
ILED(DU)
Current of LED Driver Unit
℃
50000
-
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
8
8.3 Projected Capacitive Touch
Item
Value
Symbol
Min.
Typ.
Max.
Unit
Note
Power Supply Voltage
VDD
4.8
5.0
5.2
V
-
Power Supply Current
IDD
-
28.0
42.0
mA
(1)
Output High Threshold Voltage
VOH
2.8
-
-
V
-
Output Low Threshold Voltage
VOL
-
-
0.8
V
-
VDI
0.2
-
-
V
-
VCM
0.8
-
2.5
V
PL
-
140
210
mW
Differential Input Sensitivity
|(D+)-(D-)|
Differential Input Common Mode
Range
Power Consumption
@5.0V
Interface
USB
-
Function
Multi Touch
-
Note (1) This test condition is touched with 10 points.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
9. Block Diagram
9.1 TFT-LCD Module with Backlight Unit
DC/DC
TFT LCD PANEL
640(RGB)x 480 Pixel
Gate
Driver
VLED
VLED
GND
GND
PWM
NC
Source
Driver
GND
CLK
IHS
IVS
GND
R0~R5
GND
G0~G5
GND
B0~B5
TEST1
DEN
VCC
VCC
R/L
U/D
TEST2
TEST3
LED
DRIVER
BACKLIGHT
GND
VDD
NC
NC
NC
NC
NC
DD+
GND
Projected Capacitive Touch
9
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
10. Input / Output Terminals Pin Assignment
10.1 TFT-LCD Module
Connector: CVILUX CF25331D0R0-05
Pin No.
Symbol
I/O
Description
1
GND
I
Ground
2
CLK
I
Clock signal
3
IHS
I
Horizontal synchronous signal
4
IVS
I
Vertical synchronous signal
5
GND
I
Ground
6
R0
I
RED data (LSB)
7
R1
I
RED data
8
R2
I
RED data
9
R3
I
RED data
10
R4
I
RED data
11
R5
I
RED data(MSB)
12
GND
I
Ground
13
G0
I
GREEN data(LSB)
14
G1
I
GREEN data
15
G2
I
GREEN data
16
G3
I
GREEN data
17
G4
I
GREEN data
18
G5
I
GREEN data(MSB)
19
GND
I
Ground
20
B0
I
Blue data(LSB)
21
B1
I
Blue data
22
B2
I
Blue data
23
B3
I
Blue data
24
B4
I
Blue data
25
B5
I
Blue data(MSB)
26
TEST1
I
TEST1(Please be sure to connect 26pin with ground)
27
DEN
I
Input data enable control
28
VCC
I
+3.3V power supply
29
VCC
I
+3.3V power supply
10
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
Pin No.
Symbol
I/O
Description
30
R/L
I
Selection signal for horizontal scanning direction. Note (1)
31
U/D
I
Selection signal for vertical scanning direction. Note (1)
32
TEST2
I
TEST2(to be open, or connected to either GND or Vcc)
33
TEST3
I
TEST3(Please be sure to connect 33pin with ground)
Note (1)
R/L=L, U/D=H
R/L=L, U/D=L
R/L=H, U/D=H
R/L=H, U/D=L
11
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
10.2 Backlight Unit
Connector: CVILUX CI1106M1HR0-LF
Pin No.
Symbol
Description
1
VLED
LED drive circuit power supply (12V)
2
VLED
LED drive circuit power supply (12V)
3
GND
Ground
4
GND
Ground
5
PWM
PWM Dimmer
6
NC
NO CONNECTION
JUMP: HCH HDS502-E
PIN 1
PIN2
Result
ON
ON
200mA
ON
OFF
150mA
OFF
ON
150mA
OFF
OFF
100mA
10.3 Projected Capacitive Touch
Connector: CVILUX CF25101D0R0-05
No.
Symbol
Functions
1
GND
Ground
2
VDD
+5.0V power supply.
3
NC
Not Connected
4
NC
Not Connected
5
NC
Not Connected
6
NC
Not Connected
7
NC
Not Connected
8
D-
Data-
9
D+
Data+
10
GND
Ground
12
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
13
10.4 Color Data Input Assignment
The brightness of each primary color(red, green and blue) is based on the
6 bit gray scale data input for the color. The higher the binary input, the brighter
the color. The table provides the assignment of color versus data input.
Data Signal
Color
Red
Green
Blue
D05 D04 D03 D02 D01 D00 D15 D14 D13 D12 D11 D10 D25 D24 D23 D22 D21 D20
Black
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Green
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Blue
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
Cyan
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
Magenta
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
Yellow
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
White
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Red(0) / Dark
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Red(1)
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
Red(62)
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
Red(63)
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
Green(0) / Dark
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(1)
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
Green(61)
0
0
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
0
Green(62)
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
Green(63)
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
Blue(0) / Dark
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Blue(1)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Blue(2)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
1
Blue(62)
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
Blue(63)
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
Basic Colors
Red(2)
Gray Scale Of RED
:
:
Red(61)
Green(2)
:
:
Gray Scale Of Green
Gray Scale Of Blue
:
:
Blue(61)
: : : : : : : : : : : : : : : : : :
: : : : : : : : : : : : : : : : : :
: : : : : : : : : : : : : : : : : :
: : : : : : : : : : : : : : : : : :
: : : : : : : : : : : : : : : : : :
: : : : : : : : : : : : : : : : : :
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
10.5 Power ON/OFF Sequence
POWER SEQUENCE TABLE
Parameter
Value
Units
Min.
Typ
Max.
T1
0.5
-
10
ms
T2
0
-
50
ms
T3
500
-
-
ms
T4
500
-
-
ms
T5
0
-
50
ms
T6
1000
-
-
ms
14
MODEL NO.
EVERVISION
VGG644805-6UFLWI
11. Interface Timing
11.1 Input Signal Characteristics
PAGE
SPEC ONLY
15
MODEL NO.
EVERVISION
VGG644805-6UFLWI
11.2 Waveform
11.2.1 Clock and Data input waveforms
11.2.2 Data input format for RGB Mode
PAGE
SPEC ONLY
16
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
17
11.2.3 The HS & VS timing of the ODD/EVEN field.
11.3 USB Interface
11.3.1 Single Touch Function
Single Touch Function works with plug’n play under system Windows 2000, Wind
ows XP and Windows7.
For other operating systems like Linux a driver must be programmed.
11.3.2 Multi Touch Function
The Multi Touch Function works with plug’n play under system Windows7.
For older Windows systems or other operating systems a driver must be program
med.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
18
12. Optical Characteristics
The optical characteristics should be measured in a dark environment (≦ 1 lux)
or equivalent state with the methods shown in Note (4).
Item
Symbol
Contrast Ratio
CR
TR
Response Time
TF
(
Luminance Center
)
Brightness uniformity
Conditions
θx=0°, θY =0°
Viewing
Normal Angle
Min.
Typ.
Max.
Unit
Note
200
(350)
-
-
(2)
-
15
-
ms
-
35
-
ms
-
cd/m
2
-
cd/m
2
-
cd/m
2
BUNI
80
(450)
(340)
(225)
(85)
Rx
0.575
0.625
0.675
-
Ry
0.300
0.350
0.400
-
0.320
0.370
0.420
-
0.505
0.555
0.605
-
0.095
0.145
0.195
-
By
0.060
0.110
0.160
-
Wx
0.270
0.320
0.370
-
Wy
0.305
0.355
0.405
-
θx+
60
Y
B/L=200mA
390
B/L=150mA
290
B/L=100mA
195
-
(3)
(4)
% (5)
Red
Gx
Green
Color
Gy
Chromaticity
Bx
θx=0°, θY =0°
Viewing
Normal Angle
Blue
(1),(4)
White
Horizontal
60
θxViewing Angle
CR≥10
θY+
60
θY-
60
Vertical
(80)
(80)
(80)
(80)
deg.
-
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
19
Note (1) Definition of Viewing Angle (θx, θy):
Normal
θx = θy = 0º
θy-
θy+
12 o’clock direction
x-
θX- = 90º
y+
θx−
θy+ = 90º
θx+
6 o’clock
y-
x+
θy- = 90º
θX+ = 90º
Note (2) Definition of Contrast Ratio (CR):
Note (3) Definition of Response Time (TR, TF):
Gray Level 255
Gray Level 255
100%
90%
Optical
Response
Gray Level 0
10%
0%
Time
TR
TF
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
20
Note (4) Measurement Set-Up:
The LCD module should be stabilized at a given temperature for 30 minutes
to avoid abrupt temperature change during measuring. In order to stabilize
the luminance, the measurement should be executed after lighting Backlight
for 30 minutes in a dark room or equivalent condition.
LCD Module
LCD Panel
Center of the Screen
Photometer
(TOPCON BM-7 Fast)
Field of View = 1º
500 mm
Light Shield Room
(Ambient Luminance < 1 lux)
Note (5) Definition of brightness uniformity
Brightness uniformity=(Min Luminance of 9 points)/(Max Luminance of 9 points)×100%
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
21
13. Reliability Test
No.
Test Items
Test Condition
1
High Temperature Storage Test
2
Low Temperature Storage Test
3
High Temperature Operation
Test
4
Low Temperature Operation
Test
5
High Temperature and High
Humidity Operation Test
℃
T = -30℃
T = 70℃
T = -20℃
T =60℃
6
Electro Static Discharge Test
non-operating
(
)
-Panel Surface/Top Case
150pF, 330Ω
Air ±15kV, Contact: ±8kV
(3)
7
Mechanical Shock Test
non-operating
(
)
Half sine wave,
100G, 6ms
3 times shock of each six surfaces
(3)
8
Vibration Test
non-operating
(
)
Sine wave:10 ~ 55 ~ 10Hz
amplitude:1.5mm
3 axis, 2 hours/axis
(3)
9
Thermal Shock Test
non-operating
(
)
-20
30min ~ 70
cycles
10
Drop Test(with Carton)
Height 80
1 corner, 3 edges, 6 surfaces
Ta= 80
a
Remark
240 hours
(1),(3),(4)
240 hours
(1),(3),(4)
240 hours
(2),(3),(4)
a
240 hours
(1),(3),(4)
a
90%RH
S
:
240 hours
:
℃(
: ㎝
()
(3), 4
) ℃(30min),10 (3),(4)
(3)
:
Note 2:Ts is the temperature of panel’s surface.
Note 3:In the standard condition, there shall be no practical problem that may affect the display function.
Note 1 Ta is the ambient temperature of samples.
After the reliability test, the product only guarantees operation, but don’t guarantee all of the
cosmetic specification.
:
Note 4 Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at
room temperature.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
22
14. Packaging
PARTS LIST
ITEM
SIZE(LxWxH) unit:mm
1
STATIC SHIEDING BAGS
300.0x145.0x0.09
2
EPE PAD
345.0x30.0x20.0
EPE
8
3
CARD BOARD
345.0x150.0x3.5
CARTON
6
4
CARD BOARD
450.0x23.0x150.0
CARTON
16
5
INTERNAL BOX
455.0x350.0x164.0
CARTON
2
6
EXTERNAL BOX
475.0x370.0x375.0
CARTON
1
7
PRODUCT
144.0x104.6x14.6
MATERIAL
Q.T.Y
60
60
NOTE
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
23
15. Precautions
15.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during
assembly.
(2) It’s recommended to assemble or to install a module into the user’s system
in clean working areas. The dust and oil may cause electrical short or worsen
the polarizer.
(3) Don’t apply pressure or impulse to the module to prevent the damage of
LCD panel and Backlight.
(4) Always follow the correct power-on sequence when the LCD module is turned
on. This can prevent the damage and latch-up of the CMOS LSI chips.
(5) Do not plug in or pull out the I/F connector while the module is in operation.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of
polarizer is very soft and easily scratched.
(8) Moisture can easily penetrate into LCD module and may cause the damage
during operation.
(9) High temperature or humidity may deteriorate the performance of LCD module.
Please store LCD module in the specified storage conditions.
(10) When ambient temperature is lower than 10ºC, the display quality might be
reduced. For example, the response time will become slow.
15.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from
the eyes or mouth. In case of contact with hands, skin or clothes, it has to be
washed away thoroughly with soap.
(2) After the module’s end of life, it is not harmful in case of normal operation and
storage.
15.3 Terms of Warrant
(1) Acceptance inspection period
The period is within one month after the arrival of contracted commodity at the
buyer’s factory site.
(2) Applicable warrant period
The period is within twelve months since the date of shipping out under normal
using and storage conditions.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
16.Outline Drawing
H JST
IC
PAGE
SPEC ONLY
24
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
25
17.Definition of Labels
The bar code nameplate is pasted on each module as illustration, and its definitions
are as following explanation.
VGG644805-6UFLWI
ABCDEFGHIJKL
(a) Module Name: VGG644805-6UFLWI
(b) Serial ID:
A B
C D
E
F G
H
I
J
K L
Serial No.
Factory Code
Manufactured Date
Screen Size
Serial ID includes the information as below:
(a) Screen size (Diagonal)
: Inch Code (ABCD)
3.5” → 0350
10.4” → 1040
(b) Manufactured Date: Year, Month, Day (EFG)
Year (E)
Year
2000
2001
2002
2003
2004
Mark
0
1
2
3
4
Year
2010
2011
2012
2013
2014
Mark
A
B
C
D
E
2005 2006
5
6
2015 2016
F
G
2007
2008
2009
7
8
9
2017
2018
2019
H
I
J
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
26
Month (F)
Month
Jan.
Feb.
Mar.
Apr.
May
Jun.
Jul.
Aug.
Sep.
Oct.
Nov.
Dec.
Mark
1
2
3
4
5
6
7
8
9
A
B
C
Day (G)
Day
1
2
3
4
5
6
7
8
9
10
11 12 13 14 15 16
Mark
1
2
3
4
5
6
7
8
9
A
B
Day
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Mark
H
I
J
K
L
M
N
O
P
Q
R
C
S
D
T
E
U
(c) Factory Code (H)
:
For EVERVISION internal use.
(d) Serial No. (IJKL)
:
Manufacturing sequence of product, for example: 0001~9999.
F
V
G
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
27
18. Incoming Inspection Standards
18.1 The environmental condition of inspection
The environmental condition and visual inspection shall be conducted as below.
(1) Ambient temperature 25 ± 5℃
(2) Humidity: 45 ~ 65 % RH
(3) Viewing distance is approximately 30 ~ 40 cm
(4) Viewing angle is normal to the LCD panel as Fig _1 ( ± 45° )
(5) Ambient Illumination: 300 ~ 500 Lux for external appearance inspection
18.2 The defects classify of AQL as following:
(1) Test method :According to ANSI/ASQC Z 1.4 .General Inspection Level Ⅱ take a
single time
(2) The defects classify of AQL as following:
Class of
defects
AQL
Major
0.65%
Minor
1.5%
Definition
It is defect that is likely to result in failure or to reduce materially
the usability of the intended function.
It is a defect that will not result in functioning problem with
deviation classified.
MODEL NO.
EVERVISION
VGG644805-6UFLWI
18.3 Inspection Parameters
PAGE
SPEC ONLY
28
MODEL NO.
EVERVISION
VGG644805-6UFLWI
Incoming Inspection Touch Panel
PAGE
SPEC ONLY
29
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
30
Note1. The definition of dot defect : The dot defect was judged after repair and the size of a
defective dot over 1/2 of whole dot is regarded as one defective dot.
Note2.
W
L
Note3. D:Diameter D=(a+b)/2
Note4. Bright dot is defined through 2% transmission ND Filter as following.
Note5. ADJACENT DOT
MODEL NO.
EVERVISION
VGG644805-6UFLWI
PAGE
SPEC ONLY
31
Note6.
B:BM
A:AA
18.4 Handling of LCM
(1)Don't give external shock.
(2)Don't apply excessive force on the surface.
(3)Liquid in LCD is hazardous substance. Must not lick and swallow. when the liquid is
attach to your hand, skin, cloth etc. Wash it out thoroughly and immediately.
(4)Don't operate it above the absolute maximum rating.
(5)Don't disassemble the LCM.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement