NVD110DBM Features Minitype 8-bit Digital 1-ch Video with 1-ch bidirectional Data

NVD110DBM Features Minitype 8-bit Digital 1-ch Video with 1-ch bidirectional Data
NVD110DBM
Minitype 8-bit Digital 1-ch Video with 1-ch bidirectional Data
R S 232
RS422
RS485
Features
Video
4
4
4
NTSC or PAL video standards supported
Non-compressed 8-bit digitally encoded video
No video degradation over the maximum operating distance
Video Transmission
Data
4 Meets EIA RS-232/422/485 specifications
4 Full RS-485 Tri-state support
4 Half or full-duplex operation
4 Transparent to data encoding
4 Data rates from 0 to 115.2kbps
Optical
4
4
4
4
Description
One fiber design
High performance laser-based optics
Multimode or Singlemode
ST or FC connectors available
Robust Design
The NVD110DBM, NeTrans' 8-Bit Digital Video and Data
Modules, features high-performance laser-based optics
for the clearest, most reliable data transmission over one
fiber for both single and multi-mode with no video
degradation over the entire operating distance (up to
20km), as well as RS-232/422/485 serial data ports.
4
4
4
4
Plug-and-Play design, no in-field adjustments required.
Minitype for Wall-mount installation
Wide operating temperature range of -40ºC to +75ºC
Designed for use in harsh environments
This plug-and-play product provides instant product
compatibility for most major security manufacturers'
equipment and reliability in harsh environments, a perfect
compliment to any commercial, government or intelligent
transportation application. This small, but mighty, design
also comes ready for wall-mounted applications.
Local Diagnostics
T h e s e u n i t s a r e c o m p a t i b l e w i t h t h e N V D 11 0 D B
transmitters/receivers and NVD110DB-XXR3 receivers.
4
4
Service-friendly LED status indicators on both front and rear
of the module
Warranty
Comprehensive Lifetime Warranty
Typical Application
NVD110DBM-SSR
NVD110DBM-SST
Video
Data
1 Fiber
Video
Data
www.ot-systems.com
09
NVD110DBM
Specifications
Video
LED
Number of Channels
1
Video Signal Indication (Presence/
Format
NTSC/PAL
Absence)
Input/Output
1 Volt pk-pk (75 ohms)
Data TX / RX Status
Green/Red LED lit
Bandwidth
6MHz
Power
Green / On
Differential Gain
<2%
Differential Phase
<1 Degree Typical
SNR-CCIR weighted
>53dB
Green/Red LED lit
Connectors
Data
Video Input / Output
BNC
Optical Input / Output
ST (standard), FC (optional)
Data Input / Output
7-pin screw terminal
Power
2-pin screw terminal
1
Data Direction
Bi-directional Duplex
Data Interface
RS232, RS422, RS485 2 or 4-wire Tri-state
Selection Method
DIP switch-selectable
Electrical and Mechanical
Data Rate
0~115,200bps
Power
12VDC @500mA
Data Protocol
Protocol transparency
Dimensions(WxHxD)
107x 70 x 38mm(Max)
Line Carrier Detection
RS485 (2/4-wire) Tri-state output
Shipping Weight
0.2kg
Video Transmission
Number of Channels
Environmental
Operating Temp
。
。
Relative Humidity
-40 C to +75 C
。
。
-40 C to +85 C
0 to 95% non-condensing
MTBF
> 100,000 hours
Storage Temp
Ordering Information
Fiber Type
Multi-mode
(62.5/125μm)
Description
Part Number
NVD110DBM-SMT
Minitype 1 - ch Video Transmitter with 1-ch bidirectional
Data Transceiver
NVD110DBM-SMR
Minitype 1 - ch Video Receiver with 1-ch bidirectional
Data Transceiver
NVD110DBM-SST
Minitype 1 - ch Video Transmitter with 1-ch bidirectional
Data Transceiver
Single-mode
(9/125μm)
NVD110DBM-SSR
Wavelengths
Optical Power
Budget
Max.
Distance
(Km)
1310 | 1550nm
12dB
4
1310 | 1550nm
18dB
20
Minitype 1 - ch Video Receiver with 1-ch bidirectional
Data Transceiver
§ ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMT.
Options
§ Please feel free to consult factory if longer transmission distance is required.
Power Adaptor
Notes:
§ Power adaptor is included.
§ Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the
network.
§ Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
§ Power adaptor is manufactured by third party and is supplied with fitted screw - terminal output cables.
§ Please feel free to consult factory for any special requirement and customization.
ISO 9001:2000
FM 88638
OT Systems Ltd., June 2012
Due to continuous improvement, all product specifications are subject to change without further notice.
10
www.ot-systems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement