MERO 6 AUDAC Features
AUDAC
MERO 6
6” High-end slim in-wall speaker
Features
- High-end 2-way in-wall speaker
- Slim grill with thin border (1 mm)
- Elegant & unobtrusive design
- Warm & true to nature sound
- Paintable front grill
- 1” + 6” aluminium membrane drivers
- 60 Watt RMS power
- Gold-Con™ connections
- Quick and simple mounting
Applications
- Residential Hi-Fi & home cinema
- Retail stores & shopping centers
- Restaurants
- Lounges & bars
- Boutiques
- Offices
The MERO speakers will blend beautifully into
any interior due to their nearly invisible design,
making only their extraordinary sound draw your
attention. Their slim grill with very thin border of
only 1 mm and limited grill depth extrudes the
surface by only 3.2 mm when installed.
Their grilles are retained by neodymium magnets
which enables assembly in seconds, while
powerful enough to keep the grill fixed, even
when subject to vibrations or if touched. Their
applications range from residential Hi-Fi and
home cinema installations to multi-zone systems,
unobtrusive installations in lounges, bars,
boutiques and offices.
The selection of high-grade materials in
combination with accurate acoustics craftsmanship
makes the MERO speakers superior in their
class. The largest sized MERO6 consists of a
6” aluminium cone woofer and complementary
1” dome tweeter that are smoothly matched and
optimized using a high-quality crossover network.
This results in a true to nature sound reproduction
for a warm and detailed sound with an RMS
power of 60 Watt.
An acoustically optimized waveguide matches
the dispersion of woofer and tweeter, while a
phaseplug reduces diffraction and enhances offaxis high frequency response. All these details
share their part to its pure sound.
An elegant look with minimal visual impact is
created by the slim grill with very thin border,
while great ease and installers convenience is
guaranteed using the quick-fix mechanism with
Gold-CON™ connectivities. Installation can be
done both vertically and horizontally, while the
adjustable tweeter allows optimal orientation
positioning.
Specifications
SYSTEM SPECIFICATIONS
Speaker type
Max power
RMS power
Impedance
Sensitivity (1W/1m)
Sound pressure (max W/1m)
Frequency response (±3 dB)
Frequency range (-10 dB)
Crossover frequency
Crossover type
Horizontal dispersion (1)
Verical dispersion (1)
PRODUCT FEATURES
Dimensions (Width x Height x Depth)
Weight net
Connection
Drivers (coaxial)
HF
LF
Construction
Grill type
Cut-out measurement
Built-in depth
Mounting & handling
Available colours
SHIPPING & ORDERING
Packaging
Shipping weight & volume
Accessories included
Optional accessories
2-way
120 Watt
60 Watt
8 Ohm
88 dB
106 dB
55 Hz - 20 kHz
44 Hz - 20 kHz
3 kHz
Passive built-in
160°
140°
196.5 x 276.5 x 82 mm
1.66 Kg
Gold-Con™ spring clamps
1” aluminium membrane
6” aluminium membrane
High quality ABS housing
Thin edged white grill (RAL9003)
174 x 254 mm
78.5 mm
4 Screw quick-fixing mechanism
Black frame & white grill
Cardboard box
2.1 Kg ~ 0.0083 Cbm
Cut-out template
WTR24 - 24W 100V line transformer
GLM06/B - Black grill (RAL9005)
GLM06/P - Paintable grill
(1) Half space (flush mounted in ceiling), average 100 Hz to 10 kHz at -6 dB
*AUDAC reserves the right to change specifications without notice: this is part
of our policy to continuously improve our products.
WWW.AUDAC.EU
Architects’ and Engineers’ Specifications
The in-wall loudspeaker shall be a 2-way type, equipped with a 6'' aluminium cone low frequency driver and a 1'' aluminium dome tweeter
with neodymium magnet.
It shall have an RMS power handling of 60 Watt with a maximum power handling of 120 Watt and the frequency response (±3 dB) shall
range from 55 Hz to 20 kHz. The sensitivity shall be 88 dB when measuring with an input signal of 1 Watt at a distance of 1 meter, while
the maximum continuous sound pressure level shall be 106 dB. The nominal dispersion shall be a 160° horizontal and 140° vertical
coverage pattern at -6dB (average 100 Hz - 10 kHz).
The loudspeaker shall have an impedance of 8 Ohm and shall contain a passive built-in crossover network with crossover frequency of
3000 Hz, which is constructed of high-quality components.
The speakers frame and basket shall be constructed as one entity in strong ABS with a black colour and a textured matt surface finishing.
A 4-screw quick-fixing mechanism shall be provided to mount the speaker into a wall in a quick and simple way. The connectivies shall
be performed using Gold-Con™ spring clamp connectors.
To make the loudspeaker nearly invisible when mounted, the speaker shall have a white (RAL9003) grill with a very thin border of 1 mm
which extrudes the ceiling surface by only 3.2 mm. This grill shall be constructed of steel which can be painted to make it blend in with
any environment. The assembly and disassembly of the grill shall be very simple thanks to the neodymium magnets that hold it in place.
250
276,5
The speaker shall have a width of 196,5 mm, a height of 276,5 mm and a depth of 82 mm and shall not exceed 1,66 kg. The speaker shall
fit in a mounting hole of 174 mm x 254 mm and a build-in depth of 78,5 mm.
Technical drawing
78,5
82
250
276,5
196,5
250
276,5
170
196,5
78,5
82
196,5
78,5
82
170
MERO6
Weight:
Outer dimensions:
(w x h x d)
TBA
170
WWW.AUDAC.EU
Product description:
6" HIGH-END SLIM IN-WALL SPEAKER
196,5 x 276,5 x 82
Unit height:
N/A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement