OSRAM

OSRAM
OSRAM
PrevaLED® COIN 50 G2
Technical Information
Benefits
 Fits in most existing MR16 traditional luminaires
 Easy & fast design-in for luminaire manufacturers
 Narrow beam angles, 24o and 40o
 High lumen output for HID-mini replacement
 Flexibility through 3 lumen packages and 3 CCTs
Applications
 Shop
- Cabinet & Shelf
 Hospitality
- Restaurant & Hotel
- Corridors & Elevator
Technical Operating Data
Product
Current
[mA]
Power
Flux [lm]
Lum.
Intensity
[cd]
Typ.
CRI
[Ra]
Efficacy
[lm/W]
PL-CN50-G2-900-927-24D **
350
10.7
24
PL-CN50-G2-900-930-24D
350
10.7
24
2700
830
3320
92
77
3000
830
3320
92
PL-CN50-G2-900-940-24D
350
10.7
77
24
4000
900
3600
92
PL-CN50-G2-900-927-40D **
350
84
10.7
40
2700
830
1660
92
PL-CN50-G2-900-930-40D
77
350
10.7
40
3000
830
1660
92
77
PL-CN50-G2-900-940-40D
350
10.7
40
4000
900
1800
92
84
PL-CN50-G2-1200-827-24D **
350
10.7
24
2700
1010
4040
83
94
PL-CN50-G2-1200-830-24D
350
10.7
24
3000
1100
4400
83
102
PL-CN50-G2-1200-840-24D
350
10.7
24
4000
1200
4800
83
112
PL-CN50-G2-1200-827-40D **
350
10.7
40
2700
1010
2020
83
94
PL-CN50-G2-1200-830-40D
350
10.7
40
3000
1100
2200
83
102
PL-CN50-G2-1200-840-40D
350
10.7
40
4000
1200
2400
83
112
PL-CN50-G2-1400-827-24D **
350
12.8
24
2700
1180
4720
83
92
PL-CN50-G2-1400-830-24D
350
12.8
24
3000
1280
5120
83
100
PL-CN50-G2-1400-840-24D
350
12.8
24
4000
1400
5600
83
109
PL-CN50-G2-1400-827-40D **
350
12.8
40
2700
1180
2360
83
92
PL-CN50-G2-1400-830-40D
350
12.8
40
3000
1280
2560
83
100
PL-CN50-G2-1400-840-40D
350
12.8
40
4000
1400
2800
83
109
** (made to order)
[W]
Radiance
Color
Angle [°] Temp. [K]
Lum.
All Data are related to the entire module (Testing at steady status. Ta=25oC ± 5oC. Testing current tolerance: ±5%)
Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily
correspond to the actual parameters of each single product which could differ from the typical data
Technical Features
 Module ready to use with two cables:
 Color tolerance: <MacAdam 4 SDCM
- red cable (+ pole)
 tp temperature of 75oC (see IEC/PAS 62717)
- black cable (- pole)
 Max. tc temperature of 95oC (see IEC/PAS 62717)
 Cable length 500 mm, cable Ø 1.6 mm/AWG 22
 L70B50 >=50,000 hours at tp=75oC
 Color Rendering index CRI (Ra) typ. 92 for PL-CN50G2-900 and typ. 83 for PL-CN50-G2-1200 & PLCN50-G2-1400
 Best efficacy in combination with OSRAM
OPTOTRONIC® constant current control gears
 Modul efficacy up to 112 lm/W
PrevaLED® COIN 50 G2
Page 1
OSRAM
Minimum and Maximum Ratings
Product
Operating Temperature
Storage Temperature
Max. Current
At tc-Point [C°]*
[C°]*
[mA]*
PL-CN50-G2-900-927-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-900-930-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-900-940-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-900-927-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-900-930-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-900-940-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-827-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-830-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-840-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-827-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-830-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1200-840-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-827-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-830-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-840-24D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-827-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-830-40D
-20 … 95
-40 … 80
370
PL-CN50-G2-1400-840-40D
-20 … 95
-40 … 80
370
*) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module.
Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module.
The temperature of the LED module must be measured at the tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature
sensitive label. For exact location of the tc-point see drawing below.
Dimensions & Mechanical data
Dimension (mm)
Ø50 x 50 (H)
Mounting
MR16 similar
Optics
PC lens
Weight
80 grams
PrevaLED® COIN 50 G2
Page 2
OSRAM
Standard Compliance
Safety
EN 62031, IEC 60598-1, UL 8750
EMC
EN 55015, EN 61547
Eye Security
EN 62471
Ingress Production
Dry Location, IP 20
Environment
RoHS
Electrical Operating Conditions
PL-CN50-G2-900-XXX-XXD
PL-CN50-G2-1200-XXX-XXD
PL-CN50-G2-1400-XXX-XXD
40
38
108%
Typical voltage (V)
Flux normalized Tp=75℃
110%
106%
104%
102%
100%
98%
36
34
32
30
28
PL-CN50-G2-900-XXX-XXD
PL-CN50-G2-1200-XXX-XXD
PL-CN50-G2-1400-XXX-XXD
26
96%
0
20
40
60
80
24
100
0
15
30
T case (℃)
45
60
75
90
105
T case (℃)
45
Tp=75℃
40
100%
Typical voltage
Flux normalized at rated current
120%
80%
60%
40%
PL-CN50-G2-900-XXX-XXD
PL-CN50-G2-1200-XXX-XXD
PL-CN50-G2-1400-XXX-XXD
20%
0%
35
30
25
PL-CN50-G2-900-XXX-XXD
PL-CN50-G2-1200-XXX-XXD
PL-CN50-G2-1400-XXX-XXD
20
0
100
200
300
400
500
0
If (mA)
PrevaLED® COIN 50 G2
50
100
150
200
250
If (mA)
Page 3
300
350
400
450
OSRAM
Safety Information
 The LED module itself and all its components must not be mechanically stressed.
 Assembly must not damage or destroy conducting paths on the circuit board.
 To avoid mechanical damage to the connecting cables, the module should be attached securely to the intended
substrate. Heavy vibration should be avoided.
In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically
stabilised power supply protecting against short circuits, overload and overheating.
To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark
and be ENEC certified. The declarations of conformity must include the following standards:
CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384.
Also check for the mark of an independent authorized certification institute.
Please see the relevant brochure for more detailed information (see "Related and Further Information").
OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation.
 Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety
standards. Only qualified personnel should be allowed to perform installations.
 Correct electrical polarity needs to be obsered. Wrong polarity will destory the module and will result in no light
emission.
 Pay attention to standard ESD precautions when installing the module.
 The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion.
 Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable
protection against corrosive agents such as moisture and condensation and other harmful elements.
 If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards
in the application.
 Pay attention not to exceed the maximum operation temperature at tc point when the modules are used in enclosed
environment.
PrevaLED® COIN 50 G2
Page 4
OSRAM
Ordering Guide
Product Name
Product Code
Product Number
(EAN10)
Product Number
(EAN40)
Piece per
box
PrevaLED® COIN 50 G2
PL-CN50-G2-900-927-24D
4052899324145
4052899324152
20
PrevaLED® COIN 50 G2
PL-CN50-G2-900-930-24D
4052899324169
4052899324176
20
PrevaLED® COIN 50 G2
PL-CN50-G2-900-940-24D
4052899324183
4052899324190
20
PrevaLED® COIN 50 G2
PL-CN50-G2-900-927-40D
4052899324206
4052899324213
20
PrevaLED® COIN 50 G2
PL-CN50-G2-900-930-40D
4052899324220
4052899324237
20
PrevaLED® COIN 50 G2
PL-CN50-G2-900-940-40D
4052899324275
4052899324282
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-827-24D
4052899324299
4052899324305
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-830-24D
4052899324343
4052899324350
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-840-24D
4052899324367
4052899324374
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-827-40D
4052899324381
4052899324398
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-830-40D
4052899324404
4052899324411
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1200-840-40D
4052899324428
4052899324435
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-827-24D
4052899324442
4052899324459
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-830-24D
4052899324466
4052899324473
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-840-24D
4052899324480
4052899324497
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-827-40D
4052899324503
4052899324510
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-830-40D
4052899324527
4052899324534
20
PrevaLED® COIN 50 G2
PL-CN50-G2-1400-840-40D
4052899324541
4052899324558
20
Sales and Technical Support
OSRAM Asia Pacific
30th Floor, China Resource Building,
26 Harbour Road, Wanchai, Hong Kong
Sales and technical support is given by the local
OSRAM subsidiaries. Complete subsidiaries
listing is available at OSRAM homepage.
+852 3652 5678
www.osram.com
PrevaLED® COIN 50 G2
Page 5
OSRAM
Application Note
OTe 15/350 PC
OTe 25 CS
OTe 15 CS
OTe 13 PC
OTe 18 PC
Dimming
PC
N.A
N.A.
PC
PC
Drivers
Typ.
Current [mA]
Recommended OPTOTRONIC® devices
Modules
PL-CN50-G2-900
350




PL-CN50-G2-1200
350




PL-CN50-G2-1400
350



B
A
A
B
B
Yes
Yes
N.A.
Jan
2014
Jan
2014
Connection Type
Driver Availability

Reference Connection Diagrams
CAUTION
 The following diagrams are for reference only.
 Please refer to Instruction Sheet of power supply/ dimmer/ controller for details.
 Disconnected from mains supply before wiring work.
 Wrong polarity will destroy the module and result in no light emission.
Type A: 1-to-1 connection
L
220-240V ac
N
PrevaLED® COIN 50 G2
Constant Current
Power Supply
Page 6
+
-
OSRAM
Type B: 1-to-1 connection with Phase Cut dimming
Phase Cut Dimmer
L
220-240V ac
N
Phase cut dimmable
Constant Current
Power Supply
Remark: - 1pc OTe PC driver for 1pc PL-CN50-G2 @350mA
- Dimming by reduce output current
PrevaLED® COIN 50 G2
Page 7
+
-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement