UBK 885 Upright Bike - Experience™ Series

UBK 885 Upright Bike - Experience™ Series
Operating and Maintaining
P80 Console
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
P80 OM 301407-710 rev K, en
March 2013
Edition Information
OPERATING AND MAINTAINING THE P80 CONSOLE
P/N 301407-710 rev K
Copyright © March 2013 Precor Incorporated. All rights
reserved. Specifications subject to change without notice.
This document applies to Preva version 3.0 and P80 console
software version 3.0.
Trademark Note
Precor, AMT, EFX, and Preva are registered trademarks of
Precor Incorporated. Other names in this document may be
the trademarks or registered trademarks of their respective
owners.
iPod® is a trademark of Apple Inc., registered in the U.S. and
other countries.
Made for iPod® means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod may affect wireless
performance.
Made for iPod touch® (1st, 2nd, 3rd, and 4th generation), and
iPod nano® (2nd, 3rd, 4th, 5th, and 6th generation).
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Intellectual Property Notice
All rights, title, and interests in and to the software of the
Preva Business Suite, the accompanying printed materials,
any copies of such software, and all data collected via the
Preva Business Suite, are exclusively owned by Precor or its
suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning
designs of exercise equipment. Precor aggressively seeks U.S.
and foreign patents for both the mechanical construction and
the visual aspects of its product design. Any party
contemplating the use of Precor product designs is hereby
forewarned that Precor considers the unauthorized
appropriation of its proprietary rights to be a very serious
matter. Precor will vigorously pursue all unauthorized
appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
1-800-347-4404
http://www.precor.com
Important Safety Instructions
Important: Save these instructions for future reference.
Read all instructions in the documentation provided with your
exercise equipment, including all assembly guides, user
guides, and owner’s manuals, before installation of this
device.
Note: This product is intended for commercial use.
The display apparatus (hereinafter referred to as the console)
is intended to be shipped with new Precor exercise equipment
(hereinafter referred to as the base unit). It is not packaged for
individual sale.
WARNING
To prevent injury, the console must be
attached securely to the base unit following all
assembly and installation instructions shipped
with the base unit. The console is intended to
be connected to AC mains power through the
furnished power supply ONLY. It should be
powered on only when installed as described
in the assembly and installation instructions
shipped with the base unit. The console is
intended for use only with Precor fitness
equipment, not as a standalone device.
Safety Precautions
Always follow basic safety precautions when using this
equipment to reduce the chance of injury, fire, or damage.
Other sections in this manual provide more details of safety
features. Be sure to read these sections and observe all safety
notices. These precautions include the following:

Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
6
Operating and Maintaining the P80 Console







Make sure all users see a physician for a complete
physical examination before they begin any fitness
program, particularly if they have high blood pressure,
high cholesterol or heart disease; have a family history of
any of the preceding conditions; are over the age of 45;
smoke; are obese; have not exercised regularly in the past
year; or are taking any medication.
French equivalent of the above notice, for Canadian
markets: Il est conseillé aux utilisateurs de subir un examen
médical complet avant d’entreprendre tout programme
d’exercice, en particulier s’ils souffrent d’hypertension
artérielle, ou de cardiopathie ou ont un taux de cholestérol
élevé, s’ils ont des antécédents familiaux des précédentes
maladies, s’ils ont plus de 45 ans, s’ils fument, s’ils sont
obèses, s’ils n’ont pas fait d’exercices réguliers au cours de
l’année précédente ou s’ils prennent des médicaments. Si vous
avez des étourdissements ou des faiblesses, arrêtez les
exercices immédiatement.
Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.
Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.
Care should be taken when mounting or dismounting the
equipment.
For Treadmills: Do not use typing or web surfing features
while walking at speeds that exceed a slow and relaxed
leisurely pace. Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
Important Safety Instructions







7
For AMT and EFX: Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
Read, understand, and test the emergency stop
procedures before use.
Keep the power cord or optional power adapter and plug
away from heated surfaces.
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
Assemble and operate the equipment on a solid, level
surface.
SPACING—The below minimum spacing
recommendations are based on a combination of the
ASTM (U.S.) voluntary standards and EN (European)
regulations as of October 1, 2012, for access, passage
around, and emergency dismount:
 Treadmills—a minimum of 0.5 m (19.7 in.) on each
side of the treadmill and 2 m (78 in.) behind the
machine.
 Cardio equipment other than treadmills—a
minimum of 0.5 m (19.7 in.) on at least one side, and
0.5 m (19.7 in.) behind or in front the machine.
Careful consideration should be given to the
requirements of the Americans with Disabilities Act
(ADA), US Code 28 CFR (see Section 305). ASTM
standards are voluntary and may not reflect current
industry standards. The actual area for access, passage
around, and emergency dismount is the responsibility of
the facility. The facility should consider the total space
requirements for training on each unit, voluntary and
industry standards, and any local, state, and federal
regulations. Standards and regulations are subject to
change at any time.
Important: These spacing recommendations should be used
when positioning equipment away from sources of heat, such
as radiators, heat registers, and stoves. Avoid temperature
extremes.
8
Operating and Maintaining the P80 Console













Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
When using the treadmill, always attach the safety clip to
your clothing before beginning your workout. Failure to
use the safety clip may pose a greater risk of injury in the
event of a fall.
Keep in mind that heart rate monitors are not medical
devices. Various factors, including the user’s movement,
may affect the accuracy of the heart rate readings. The
heart rate monitors are intended only as exercise aids in
determining heart rate trends in general.
Do not operate electrically powered equipment in damp
or wet locations.
Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.
Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of the
owner’s manual. Inspect the equipment for incorrect,
worn, or loose components, and then correct, replace or
tighten prior to use.
If you plan to move the equipment, obtain help and use
proper lifting techniques.
Equipment Weight Restrictions: Do not use the treadmill
if you weigh more than 500 pounds (225 kg). If you weigh
more than 350 pounds (160 kg), do not run on the
treadmill. For all other fitness equipment, the weight limit
is 350 pounds (160 kg).
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor. Such
attachments may cause injuries.
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
Do not use outdoors.
Do not attempt to service the equipment yourself, except
to follow the maintenance instructions in the owner’s
manual.
Never drop or insert objects into any opening. Keep hands
away from moving parts.
Important Safety Instructions


9
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk injury due
to electric shock. Read the assembly and maintenance guide
before operating. There are no user-serviceable parts inside.
Contact Customer Support if the equipment needs servicing. For
use with single phase AC power only.
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the environment.
Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
Product Recycling and Disposal
This equipment must be recycled or discarded according to
applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the return
and recycling of used equipment as applicable throughout the
European Union. The WEEE label indicates that the product is
not to be thrown away, but rather reclaimed upon end of life
per this Directive.
In accordance with the European WEEE Directive, electrical
and electronic equipment (EEE) is to be collected separately
and to be reused, recycled, or recovered at end of life. Users
of EEE with the WEEE label per Annex IV of the WEEE
Directive must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available
to customers for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any potential
effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For
proper collection and treatment, refer to Obtaining Service.
10
Operating and Maintaining the P80 Console
Regulatory Notices for the RFID Module
When equipped with a control console as described in this
document, this equipment may include a radio-frequency
identification (RFID) module. The RFID module has been
certified to operate at temperatures between -20°C and 85°C
(-4°F and 185°F).
Radio Frequency Interference (RFI)
The RFID module conforms to the following national
standards defining acceptable limits for radio frequency
interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, can cause
harmful interference to radio communications.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING
Per FCC rules, changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the
equipment.
Important Safety Instructions
11
Industry Canada
This device complies with RSS-210:2007 of the Spectrum
Management & Telecommunications Radio Standards
Specification. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
1999/5/EC R&TTE Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:









EN 55022
EN 300 330-1 V1.5.1
EN 300 330-2 V1.3.1
EN 301 489-3 V1.4.1
EN 301 489-1 V1.8.1
EN 60950-1
12
Operating and Maintaining the P80 Console
Regulatory Notices for Cardiovascular
Exercise Equipment
The regulatory information in this section applies to the
exercise equipment and its control console.
Safety Approvals for Cardiovascular Equipment
Precor equipment has been tested and found to comply with
the following applicable safety standards.
Cardiovascular Type Equipment:
 CAN/CSA, IEC, EN 60335-1 (Household and similar

electrical appliances - Safety)
EN 957 (Stationary training equipment, class S/B
compliant equipment)
PVS and P80 Regulatory Notice
This Precor equipment has been tested and found to comply
with the following applicable safety standards.

CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar
electronic apparatus - Safety)
Radio Frequency Interference (RFI)
This Precor exercise equipment conforms to the following
national standards defining acceptable limits for radio
frequency interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, may cause
harmful interference to radio communications.
WARNING
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
Important Safety Instructions
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:







EN 55022
EN 55024
EN 60335-1
EN 60065 (P80 and PVS)
13
14
Operating and Maintaining the P80 Console
Electrical Recommendations: 120 V and 240
V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment.
Precor treadmills must be connected to a 20 amp individual
branch circuit that can be shared only with one PVS. If you
need additional help with the power connections contact your
Precor authorized dealer.
Important: An individual branch circuit provides a hot conductor
and neutral conductor to a receptacle. The conductors must not be
looped, "daisy-chained", or connected to any other conductors.
The circuit must be grounded according to NEC guidelines or local
region electric codes.
Figure 1: North American 120-volt, 20-amp power receptacle
Figure 2: North American 240-volt, 20-amp power receptacle
Important Safety Instructions
15
Electrical Recommendations: All Equipment
Excluding Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
For equipment fitted with a P80 console or Personal Viewing
System (PVS) screen a separate power connection is
required. For a 20 amp branch circuit up to 10 screens can be
connected. If the branch circuit has any other devices plugged
into the circuit, then the number of screens must be reduced
by the wattage of the other devices.
Note: The typical splitter power cords that have IEC-320 C13
and C14 plugs have a recommended maximum capacity of
five screens.
Figure 3: IEC-320 C13 and C14 plugs
Obtaining Service
Do not attempt to service the equipment except for
maintenance tasks. If any items are missing, contact your
dealer. For more information regarding customer support
numbers or a list of Precor authorized service centers, visit
the Precor web site at http://www.precor.com.
16
Operating and Maintaining the P80 Console
Table of Contents
Important Safety Instructions ................................................... 5
Safety Precautions ................................................................................ 5
Hazardous Materials and Proper Disposal .................................... 9
Product Recycling and Disposal ....................................................... 9
Regulatory Notices for the RFID Module ..................................... 10
Regulatory Notices for Cardiovascular Exercise Equipment.... 12
Electrical Recommendations:
120 V and 240 V Treadmills .....................................................14
Electrical Recommendations:
All Equipment Excluding Treadmills ....................................... 15
Obtaining Service................................................................................. 15
Getting Started ........................................................................ 19
Identifying Parts of the Console......................................................20
Using the Treadmill Safety Clip ....................................................... 21
Treadmill Auto Stop™ (Automatic Stop) Function ................... 23
Configuring the System Settings............................................. 25
About ..................................................................................................... 26
Equipment Usage ................................................................................ 28
System Settings ................................................................................... 29
Introducing Users to the P80 Console .................................... 39
Changing the Default Language..................................................... 40
Using the Touch Heart Rate Feature ............................................ 40
Using a Chest Strap Transmitter .................................................... 42
Using Different Screen Views ......................................................... 43
Using the Workout Progress Panel ................................................ 45
Using the Media Panel ......................................................................46
Using the Preva Net Panel ................................................................ 47
Beginning Your Workout ......................................................... 49
Starting a QuickStart™ Workout....................................................49
Starting a Featured Workout ...........................................................50
Starting a Preset Workout ................................................................50
Ending a Workout ................................................................................ 51
Introducing Preva® Accounts to Your Users .............................. 56
18
Operating and Maintaining the P80 Console
Maintenance ............................................................................ 63
Cleaning the Console and Display ................................................. 63
Changing the Belt (Newer Model AMT Only) ........................... 64
Chapter
1
Getting Started
The P80 console offers administrators and users the ability to
set default settings that meet their specific needs. To
accomplish this, the console supports settings for different
classes of users depending on their administrative rights.
A guest user exercises on a piece of equipment without
signing in or creating a Preva account.
 A registered user has created a Preva account and uses a
sign-in password or Preva Token to use that account.
 A registered service technician uses a sign-in password
with extra permissions to administer console settings.
 An administrator is always registered, uses a sign-in
password and has full access to the console settings.
Changes to the Personal Information and Preference settings
are saved to a registered user’s Preva account. An
unregistered user can change preference settings; however,
because they lack a personal account, those changes are not
saved, and apply only to their current workout.

20
Operating and Maintaining the P80 Console
Identifying Parts of the Console
The following figure provides information about the console
keys. The number and actions of the console keys may differ
slightly depending on the type of equipment.
Figure 4: P80 console keys
Table 1. Key descriptions for the P80 console
Number Key Name
Function
Pause
Stops the equipment
Incline/CrossRamp®
Indicator
Appears on treadmill, elliptical,
TM
and AMT with Open Stride
Intensity Indicator
Also called Speed or Resistance
indicator depending on
equipment type
Volume Up/Down
Increases or decreases volume
Channel Up/Down
Changes TV channel
Mute
Turns the volume on or off
21
Getting Started
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop functions,
which behave as follows:
If the user …
Then the
treadmill belt …
And the console …
Pulls on the lanyard
Slows to a
attached to the safety stop.
clip and trips the
restart switch.
Shows the words PUSH
THE RESET SWITCH. On
some console models, an
arrow points toward the
Restart switch.
Presses down on the
red STOP button.
Shows that the exercise
workout is paused.
Slows to a
stop.
The restart switch is located just below the console and
immediately behind the red STOP button, as shown in the
following figure. When it is tripped, the bar pops up,
displaying the words PUSH TO RESET on its front side. The
treadmill does not operate while these words are visible.
Figure 5: Restart switch
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.
22
Operating and Maintaining the P80 Console
If the restart switch trips during exercise, perform the
following steps:
1. Reattach the safety clip if necessary.
2. Press the restart switch down until it clicks, returning it to
its normal position.
Note: If the restart switch trips, all information about the
current workout is deleted.
3. Start the workout from the beginning, reducing the time
as needed to account for the amount of exercise that has
been completed.
Figure 6: Attaching the safety clip
23
Getting Started
Treadmill Auto Stop™ (Automatic Stop)
Function
Important: The default setting for this feature is ON. An
administrator can turn off this feature in the System Settings;
however, Precor recommends it remain ON.
The Auto Stop™ (Automatic Stop) feature is designed to
bring the treadmill to a gradual stop when it is not in use. This
might occur if a user steps off the treadmill before the end of
a workout and leaves the treadmill running.
Sixty seconds after a treadmill workout starts or resumes, the
equipment begins Auto Stop monitoring. If a user is detected,
then no message appears, and the selected workout
continues.
If no user is detected after an additional 30 seconds, the
console displays the message NO USER DETECTED,
STOPPING IN 10 SECONDS as notification of the pending
stop. During the display of this message, a ten second
countdown begins. If a user does not override the countdown,
the belt comes to a gradual stop after the countdown is
complete.
Note: Users weighing more than 90 pounds (41 kg) are
detected within the speed and position limits of the feature.
Users weighing 50 pounds (22.7 kg) to 89 pounds (40.5 kg)
may not be detected depending on their speed and location.
Always be aware of and follow the console’s instructions for
proper operation.
24
Operating and Maintaining the P80 Console
Chapter
2
Configuring the System
Settings
Use the System mode to configure settings in ways that
benefit your users and your facility. The System menu is
visible only to administrators and registered service
technicians. Changes made to these settings are saved to the
fitness equipment.
Important: A special code is required to access these settings. Do
not share this code with anyone except those authorized to
change system settings.
The System menu contains the following settings:



About
Equipment Usage
System Settings
To view the System menu:
1. On the Welcome screen, press and hold Pause.
Figure 7: Pause key
26
Operating and Maintaining the P80 Console
2. While holding Pause, press each of the following keys
once in the order presented. Referring to the diagram
below, press:
1234
Channel Up
Volume Down
Volume Up
Channel Down
Figure 8: Settings security code
3. Release Pause.
4. Using the number pad on the screen, touch the following
numbers to enter the password:
5651565
5. Touch OK.
About
System information settings provide basic information
including equipment models and serial numbers. Most of
these settings are for informational purposes only and cannot
be modified.
To view the System Info settings menu:
1. Use the administrator code and password to view the
equipment settings.
2. Touch About.
27
Configuring the System Settings
Table 2. About settings
Setting
Access
Detail
Event Log
Admin/Tech:
View
Provides a list of the most
recent hardware and software
events, and equipment status.
Console
Serial
Number
Admin/Tech:
View
Stored in the console’s
memory.
Lower Serial
Number
Admin/Tech:
View
Stored in the console’s
memory.
Location
Admin/Tech:
View
Modify
Entered on console at time of
registration.
Release
Bundle
Version
Only Precor service
technicians can
modify this setting.
Shows current version and a
list of past software updates.
Automatically updates as part
of each software upgrade.
ETag Check
Interval
Only Precor service
technicians can
modify this setting.
Stored in the console’s
memory.
Heartbeat
Interval
Only Precor service
technicians can
modify this setting.
Determines how often the
console communicates with
the server.
Minimum
Heartbeat
Interval
Only Precor service
technicians can
modify this setting.
Minimum number of times
that the console
communicates with the server
in a given time period.
Maximum
Heartbeat
Interval
Only Precor service
technicians can
modify this setting.
Maximum number of times
that the console
communicates with the server
in a given time period.
Mfe MAC
Address
Only Precor service
technicians can
modify this setting.
Stored in the console’s
memory.
Network
Time Server
1
Only Precor service
technicians should
modify this setting.
Network
Time Server
2
Only Precor service
technicians should
modify this setting.
28
Operating and Maintaining the P80 Console
Setting
Access
Detail
Network
Time Server
3
Only Precor service
technicians should
modify this setting.
Machine
Type
Admin/Tech:
View
Type of equipment.
Equipment Usage
The Equipment Usage settings provide information on
individual usage as well as cumulative equipment usage. This
information and these settings are accessible only to
administrators and registered service technicians.
To view the Usage settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch Equipment Usage.
Table 3. Equipment Usage settings
Setting
Access
Detail
Cumulative
Workout
Seconds
Admin/Tech: Total number of seconds. Seconds
View
are counted when the workout
clock starts.
Cumulative
Workout
Distance
Admin/Tech: •
View
•
•
•
Cumulative
Workout
Sessions
Treadmills will report miles of
use.
AMTs will report a "horizontal
distance" miles or strides
depending on equipment
model.
Ellipticals will convert total
strides to miles.
Bikes will convert total
revolutions to miles.
Admin/Tech: Total number of sessions. A
View
session is counted if the summary
screen displays.
Last Workout
Admin/Tech: The date of the start of the last
Start Date Time View
workout.
Last Workout
End Date Time
Admin/Tech: The date of the end of the last
View
workout.
Configuring the System Settings
29
System Settings
Use the System Settings to test your equipment and set
parameters that benefit your users and your facility. The
System Settings menu is visible only to administrators and
registered service technicians.
The System Settings menu contains the following sections:
Connectivity
Display
TV Settings
Workout Limits
Manage Settings
Precor recommends that you configure the P80 consoles in
your facility by sharing setting files. Configure one P80
console by hand for each type of fitness equipment. For
example, configure one treadmill console, one EFX console,
one AMT console, and so on.





Once you have done this, you can export the settings for that
type of equipment onto a USB drive and then import those
settings into other P80 consoles installed on equipment of
that type.
For more information, refer to Manage Settings.
30
Operating and Maintaining the P80 Console
Connectivity
Configuring your audio, video, and network infrastructure
requires expertise. Precor strongly recommends that you
work with a qualified contractor to set up this infrastructure.
To view connectivity information:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Connectivity.
Table 4. Connectivity settings
Settings
Default
Detail
Network Type Wired
Configuration Automatic Automatic or Manual
Touch Settings to view the
•
IP Address
•
Netmask
•
Gateway
•
DNS Primary
•
DNS Secondary
Status
Connected or Not Connected
IP Address
Location-specific
®
Preva Server
URL region-specific
31
Configuring the System Settings
Display
Use the Display settings to personalize language and time
zone settings for your facility.
To view and change the Display settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Display.
Table 5. Display settings
Setting
Setting Options
Default Value
Default Language
Choose from a list of
available languages
English
Measurement
Units
US Standard
US Standard
Standby Mode
Delay
Time Zone
Metric
•
5 Minutes
•
15 Minutes
•
30 Minutes
•
60 Minutes
GMT-10
through
15 Minutes
GMT-01 Azores,
Cape Verde
GMT + 12
Internet Browser
Access
On/Off
On
Preva Net Panel
On/Off
On
TV Settings
TV Settings help you set up television channels for your users.
The TV Settings are:








Channel Guide
Region
Default Channel
Volume Correction
Skip Unnamed Channels
Extensive Scan
Closed Captioning
Export/Import Channel Names
32
Operating and Maintaining the P80 Console
To view TV Setting information:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then TV Settings.
Channel Configurations
There are two different ways to set up the TV channel
configurations for the P80 console. You can scan for available
channels or add channels manually.
Precor recommends that you set up one P80 console per
equipment type with channel definitions as well as channel
text, and then export those settings to your other P80
consoles. This method ensures that all P80 consoles in your
facility have the same configuration.
To scan for available channels:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Channel Guide, then SCAN.
The console scans available channels, and all available
channels appear on the screen.
Note: If there are analog channels missing from your list,
run an extensive scan to pick up missing channels or
channels with weaker signals.
To run an extensive scan:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Extensive Scan.
Note: This scan may take up to two hours to complete.
4. Touch On, then OK.
5. Touch Extensive Scan again.
On should still be selected.
6. Touch OK to begin extensive scan.
33
Configuring the System Settings
To delete a channel from the Channel Guide:
1. On the Channel Guide screen, touch the listing for the
channel you want to delete.
2. Touch the Delete button that appears next to the listing.
3. When asked “Are you sure?", verify that you want to
proceed, then touch Yes.
Table 6. TV Settings
Settings
Detail
Default
Channel Guide
Use to scan basic channels
Region
Select the appropriate region for your United
location.
States
Default Channel
Set a default channel for the
equipment. This is the channel that
will display when the TV is turned on.
Volume
Correction
Allows for volume adjustment of
analog channels to match digital
channels
0
Skip Unnamed
Channels
Use to screen out channels that are
not valid or encrypted.
On
Extensive Scan
Run to identify analog channels
Off
missed by the basic scan or channels
with weak signals. Takes up to two
hours to complete.
Closed Captioning Select ON if you want closed
captioning to appear on your TV
screen.
On
Export/Import
Channel Names
Blank
Import the channel names once a
basic channel scan is complete.
34
Operating and Maintaining the P80 Console
Editing the Export/Import Channel File
Note: You will need to scan for channels before you can
export the file. If you have not scanned for channels, refer to
Channel Configurations in the preceding section.
Exporting the channel list from the fitness equipment creates
a file called channel-list.ini. This file can be used to specify
channel names in languages that are not yet supported by the
P80 console.
To export this file from your console:
1. Enter your code to view System Settings. To locate your
code, refer to Configuring the System Settings.
2. Insert a USB drive into the console.
3. On the Settings menu, touch System Settings.
4. On the System Settings menu, touch TV Settings, then
Export/Import Channel Names.
5. When the box is lit, touch Export to USB. The
channel-list.ini file is saved on your USB drive in the
/precor folder.
6. Touch OK to return to the System Settings menu.
7. Touch Back twice to return to the Welcome screen.
Important: You must return to the Welcome screen before
you remove the USB drive.
8. Remove the USB drive from the console and insert it into
your computer.
To edit the file and reload it:
Note: You will need a UTF-8 capable editor program to open
the channel-list.ini file. Such programs are available free on
the internet.
1.
Using the editor, open the channel-list.ini file and edit the
channel names on the right side of the equal sign. Do not
change the information on the left side of the equal sign,
or the equal sign itself.
Important: Do not add or delete any channels from this list.
This must only be done through Deleting a Channel.
2. Save the file using the same name and extension. Be sure
it is in the /precor folder, and close the editor. This
prevents read or write errors to the USB drive.
3. Remove the USB drive from your computer and reinsert it
into the same console you used for your initial export.
4. Enter your code to view the System Settings.
Configuring the System Settings
35
5. On the System Settings menu, touch TV Settings, then
Export/Import Channel Names.
6. When the box is selected, touch Import from USB. The
updated channel-list.ini file is loaded and the Channel
Guide displays the updated channel names.
7. Touch OK to return to the System Settings menu.
8. Touch Back twice to return to the Welcome screen.
Important: You must return to the Welcome screen before
you remove the USB drive.
The updated .ini file and channel configurations can be
exported to a USB drive along with other equipment settings
and uploaded to other P80 consoles mounted on the same
type of fitness equipment.
For more information, refer to Manage Settings.
Workout Limits
The Workout Limit settings give you control over how the
equipment is used. Use these settings to create reasonable
limitations for equipment usage including speed, incline,
resistance, and duration.
In general, fitness equipment use is based on its popularity
with users and its availability during a site’s busiest times of
day. Settings to enforce time limits will help locations restrict
user usage during the busiest hours to provide more access to
equipment for more users.
Workout Limit settings are not associated with or saved as
part of a personal account and users do not have access to
them. Both administrators and service technicians have view
and modify access rights.
36
Operating and Maintaining the P80 Console
To modify the Workout Limits settings:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then Workout Limits.
Table 7. Workout Limits settings
Setting Name
Setting Options
Default
Value
Maximum
Workout
Duration
Use on-screen keypad to enter the
maximum workout duration allowed
on this fitness equipment
60
minutes
Maximum Pause •
Summary Time
Out
Resistance
Range
1 second
•
5 seconds
•
15 seconds
•
30 seconds
•
60 seconds
•
120 seconds
•
300 seconds
•
No Time Out
•
30 seconds
•
60 seconds
•
120 seconds
•
Low
30
seconds
60
seconds
High
•
(Bike)
Medium
•
High
Speed Limit
1-16 mph
16 mph
0-15
15
(Treadmill)
Incline Limit
(Treadmill)
(Incline range is -3 to 15)
Autostop
•
On
(Treadmill)
•
Off
Crossramp
Auto-Level
(EFX)
•
Sets the default position for the
crossramp
On
10
Configuring the System Settings
37
Manage Settings
Use the Manage Settings feature to save your personalized
equipment settings to a USB drive, or to import new software
updates from a USB drive.
Precor recommends that you configure the P80 consoles in
your facility by sharing settings files. The easiest way to do
this is to configure one P80 console by hand for each type of
fitness equipment. For example, configure one treadmill
console, one EFX console, one AMT console, and so on.
When your configuration is complete, export the settings file
from the hand-configured console and then import this
settings file to all P80 consoles installed on similar equipment
types.
To save your equipment settings to a USB drive:
1. Insert a USB drive into the console.
2. On the System Settings menu, touch Manage Settings,
then Export to USB.
3. Touch OK to accept the export and return to the System
Settings menu.
Note: This procedure exports the updated channel-list.ini
file as well as the larger file containing equipment
settings, network settings, and channel frequencies.
4. Touch Back twice to return to the Welcome screen.
Important: You must return to the Welcome screen before
you remove the USB drive.
Once you have exported these settings, remove your USB
drive from the console, and insert it into P80 consoles
installed on similar equipment types to upload your
personalized settings.
To import equipment settings from a USB drive:
1. Insert a USB drive loaded with your personalized settings
into the console.
2. On the System Settings menu, touch Manage Settings,
then Import from USB.
3. Touch OK to accept the import and return to the System
Settings menu.
4. Touch Back twice to return to the Welcome screen.
Important: You must return to the Welcome screen before
you remove the USB drive.
38
Operating and Maintaining the P80 Console
Chapter
3
Introducing Users to the P80
Console
The P80 console offers clear visuals and a touch-screen
layout that encourages program exploration. Multiple preset
workouts are designed to help individual users meet their
fitness goals, and the console keys and durable motion
controls are responsive and easy to use.
Important: Please review the following sections in this guide with
your users before allowing them to use the fitness equipment:



Important Safety Instructions
Using the Safety Clip (for treadmill only)
Educating Users
40
Operating and Maintaining the P80 Console
Changing the Default Language
The Welcome screen displays in a default language selected
for your region.
To change the default language before beginning your
workout:
1. On the Welcome screen, touch the language icon.
Figure 9: Language icon
2. On the Language screen, select your language choice and
touch OK.
The screens will now display in your preferred language.
Using the Touch Heart Rate Feature
Note: Touch heart rate performance may vary based on your
physiology, fitness level, age, and other factors. You may
experience an erratic readout if your hands are dry, dirty, or
oily, or if the skin on your palms is especially thick. Wearing
hand lotion can also cause an erratic readout. In addition,
make sure that the sensors are clean to ensure proper contact
can be maintained.
To use the touch heart rate feature, place the palm of your
hands directly on the metal heart rate sensors on the
equipment’s handlebars. To ensure an accurate heart rate
readout, make sure you follow these tips:


Both hands must grip the sensors for your heart rate to
register.
It takes a number of consecutive heartbeats (15-20
seconds) for your heart rate to register.
Introducing Users to the P80 Console



41
When gripping the sensors, do not grip tightly. Keep a
loose, cupping hold. Holding the grips tightly can affect
the reading.
As you work out, your perspiration will help transmit your
heart rate signal. If you have difficulty using the handheld
grips to determine your heart rate, try the sensors again
later in the workout to see if you can obtain a heart rate
signal.
If the touch heart rate feature does not work for you,
Precor recommends that you use a chest transmitter
strap.
Figure 10: Heart rate target zones
CAUTION: Your heart rate should never exceed 85% of your
maximum aerobic heart rate. Your maximum heart rate is equal to
220 minus your age.
42
Operating and Maintaining the P80 Console
Using a Chest Strap Transmitter
WARNING Signals used by the chest strap transmitter
(or heart rate strap) may interfere with
pacemakers or other implanted devices.
Consult your physician and the manufacturers
of your chest strap transmitter and implanted
device before using a chest strap transmitter.
Wearing a chest strap transmitter during your workout
provides steady heart rate information. For the equipment to
detect your heart rate, you must grip the touch heart rate
sensors or wear a chest strap transmitter while exercising. In
the presence of both touch and wireless data, the touch data
takes precedence and will display.
Note: To receive an accurate reading, the strap needs to be in
direct contact with the skin on the lower sternum (just below
the bust line for women).
To use a chest strap transmitter:
1. Carefully dampen the back of the strap with tap water.
Important: Do not use deionized water. It does not have the
proper minerals and salts to conduct electrical impulses.
2. Adjust the strap and fasten it around your chest. The
strap should feel snug, not restrictive.
3. Make sure that the chest strap is right-side-up, lies
horizontally across, and is centered in the middle of your
chest.
4. Test the chest strap placement by checking the heart rate
function on the equipment. If a heart rate is registering,
your chest strap placement is correct. If the equipment
does not register a heart rate, readjust the strap and
recheck the heart rate function.
Introducing Users to the P80 Console
43
Using Different Screen Views
Important: Some Preva features are available only to Preva
subscribers. Contact Precor to update your subscription.
Use the Views button to change the type of information
provided on the screen at anytime. Available screen views
may include:





Workout Progress View – Displays panels, icon bar, and
the status bar. Use this view to focus fully on your
workout.
Status View – Displays only the status bar and icon bar,
leaving the center of the console for media viewing.
Now Playing Media View – Displays only media and the
Views and Channel buttons. Use this view to focus on
media.
Note: The name of the Channels button changes
depending on the media you are using. For example, if you
are watching a workout guide, the name of the button will
be Videos.
Preva Net View – Displays RSS content and provides full
Internet browser access.
Weekly Goal – Requires a Preva account and sign-in
password. Tracks your progress against a goal that you
set.
44
Operating and Maintaining the P80 Console
Changing Screen Views
The Views icon appears at the bottom right of the workout
screen when the Personal Progress panel is visible.
Figure 11: Views icon
To view this panel:



Touch Quick Start.
Touch Workouts, select a preset workout, then GO.
Select the Featured Workout on the Welcome screen by
touching GO.
To change views:
1. The default view is the Workout View. Slide the panels
side to side on the screen to see the media panel.
2. Touch Views twice to see the Status view.
3. Touch Views a third time to make the Status Bar
disappear leaving only the Media view.
Introducing Users to the P80 Console
45
Using the Workout Progress Panel
Use the Workout Progress panel to customize your workout.
This is the first panel that displays once you select a workout
or touch GO. If you are on the Media panel, there are two
ways to return to the Workout Progress panel.
To return to the Workout Progress panel:
1. On the Media panel, touch the Workout icon, or slide the
right edge of the next panel across the screen.
2. The Workout Progress panel describes the current
workout selection. There are buttons to the right of the
box.
Figure 12: Workout Progress icon
Table 8. Workout Progress buttons
Button
Action
Workouts
Displays a list of goals and preset workouts available
on that equipment.
Duration
Set the length of your workout.
Personal
Info
Enter your age and weight.
Target
Choose Distance or Calories as a target for your
workout session.
Maximum distance: 50 miles.
Maximum calories: 5000 calories.
Favorites
Note: This feature is only available to users who are
signed into a Preva account
Displays a list of the workouts you have saved as
Favorites. Select one to replay.
46
Operating and Maintaining the P80 Console
Using the Media Panel
The Now Playing Media panel displays available media
sources. Select a media source such as TV or iPod, and then
use the audio browsing feature to listen to that media while
you browse Preva Net.
To choose a media source:
1. On a Workout Progress panel, touch the Media icon, or
slide the right edge of the next panel across the screen.
Figure 13: Media icon
2. The Media panel describes the current media selection.
Navigate this panel using the buttons to the right of the
box.
Table 9. Media buttons
Button
Action
Previous
Channel
Returns you to the previous media source or TV
channel.
TV Channels
Displays the channel list.
Workout
Guides
Displays a list of tutorial videos.
®
iPod
Changes the source to iPod and updates the
Media panel.
Off
Turns off all media.
47
Introducing Users to the P80 Console
Connecting and Using Your iPod®
You can listen to your favorite music and control your iPod
directly from the console.
To connect your iPod:
1. Insert the iPod into the connector at the top of the
console and place your iPod securely in the pocket
provided.
The media panel displays the words Now Playing iPod
along with the name of the song currently playing.
2. Plug your headphones into the console.
Note: Be sure that the headphones are plugged into the
console and not the iPod. If they are plugged into the iPod,
you will not be able to adjust the volume using the
console keys.
3. To pause, touch the pause button.
Figure 14: Track buttons
4. To hear a different song, touch the track buttons.
Using the Preva Net Panel
WARNING For Treadmills: Do not use typing or web
surfing features while walking at speeds that
exceed a slow and relaxed leisurely pace.
Always stabilize yourself by holding a
stationary handle bar while using typing or
web surfing features.
For AMT and EFX: Always stabilize yourself
by holding a stationary handle bar while using
typing or web surfing features.
The Preva Net option provides Internet content and full
Internet browser access. You can enable or disable this
function in your facility system settings.
Important: Some Preva features are available only to Preva
subscribers. Contact Precor to update your subscription.
48
Operating and Maintaining the P80 Console
To open Preva Net:
1. On the Welcome screen, touch Workouts or QuickStart
to begin a workout.
Once your workout begins, the Preva Net icon appears at
the bottom of your screen.
2. Touch the Preva Net icon.
Figure 15: Preva Net icon
3. On the Preva Net panel, select an option.
Table 10. Preva Net panel
Button
Action
Featured
Displays feeds of specific interest during a workout.
Preva
Feeds
Displays feeds selected by the management of your
facility.
Note: The facility administrator can rename the Preva
Feeds button.
All
Displays a larger selection of feeds.
Web
Opens a browser window.
Off
Turns off the Preva Net feature.
Chapter
4
Beginning Your Workout
CAUTION: If you are using a treadmill, be sure to attach the
security clip to your clothing before starting your workout.
The P80 console offers many different workout options. The
following sections explain the type of workouts available and
how to get started using them.
Starting a QuickStart™ Workout
The QuickStart workout begins your workout in the Manual
mode. Default calculations, such as calories burned, are based
on a 150 pound (68 kg), 35-year old individual. You can
complete a workout using the default values, or you can
personalize the settings.
To begin exercising immediately:
1. Touch Quick Start.
The words Enjoy Your Workout (or Starting Treadmill
when using the treadmill) appear on the screen and the
Manual workout begins.
Note: For treadmills, the equipment begins a
three-second count down 3, 2, 1, before the belt starts
moving.
2. At any time during a workout, you can press Pause on the
console to pause the workout. Then, you can choose to
Resume or Finish your workout.
If you choose to finish a workout, the Workout Summary
screen displays your workout status for that session.
50
Operating and Maintaining the P80 Console
Starting a Featured Workout
The Featured Workout appears in a panel on the Welcome
Screen. Use Featured Workouts to explore the fitness benefits
of preset programs and to add variety to your workout.
To begin a Featured Workout, touch Go on the Featured
Workout panel.
Starting a Preset Workout
Preset workouts are a great way to tailor your workouts to
your fitness goals, stay challenged, and add variety to your
sessions.
Preset workouts use age and weight to calculate calories and
heart rate targets. You can enter this information at the start
of the workout. If no information is entered, the workout uses
the equipment default settings to calculate workout values.
To begin a preset workout:
1. On the Welcome screen, touch Workouts.
A Workouts screen appears.
2. Each goal heading can be expanded to view the workouts
available in that goal group. To view available workouts
for a particular goal, touch a workout heading for that
goal.
3. To start a specific workout, touch the workout name, then
touch GO.
The words Enjoy Your Workout appear on the screen and
the Manual workout begins.
Note: For treadmills, the equipment begins a
three-second count down 3, 2, 1, before the belt starts
moving.
51
Beginning Your Workout
4. Anytime during a workout, you can touch Pause. When
touched, the workout pauses and you can choose to
Resume or Finish your workout. To continue your
workout, touch Resume.
If you choose to finish a workout, the Workout Summary
screen displays your workout status for that session.
Table 11. Preset workout descriptions
Goal
Workout Details
Lose Weight
Burn calories and fat.
Be Fit
Condition your cardiovascular system.
Get Toned
Tone your gluteal region, thighs and calf muscles.
Push
Performance
Choose a high-intensity interval program or work
on distance training.
Test Your
Fitness
Test your fitness level based on your age and
weight.
Ending a Workout
Some preset workouts have a five minute cool down period
added to the end of the workout. .
Cooling down is an important aspect of your workout because
it helps reduce muscle stiffness and soreness by transporting
excess lactic acid out of the working muscles. In addition, a
five minute cool down period allows your heart rate to return
to its normal, resting state.
To end your workout, touch Pause, and then Finish. A
summary screen for your current workout appears. The
measurements include:
Distance
Calories
Duration
Average movement rate/min (or the appropriate measure
based on equipment type)
 Average Heart Rate
If you have created a personal account, you can save your
workout so that you can use it again at another time. To
create a personal account, contact the facility staff.




52
Operating and Maintaining the P80 Console
Personal Information and Progress Settings
Before you begin the fitness tests or the heart rate program,
you are prompted to enter personal information in the
Workout Progress panel. This information may include age,
weight, or a length of time for that workout session. The
equipment uses this information to compute your energy
expenditure during that workout if you are tracking status
such as calories or watts.
To enter your personal settings:
1. Begin exercising by touching Quick Start or selecting
Workout.
A Workout Progress panel appears on the screen.
2. In the panel, touch Duration to enter how much time you
want to exercise.
3. In the panel, touch Personal Info to enter your age and
weight.
Table 12. Examples of Personal Information settings
Setting Setting
Options
Default
Value
Access
Age
35
Admin/Tech: Enter age as a
value or a
None
range.
•
Over 85
•
75 - 84
•
65 - 74
•
55 - 64
•
45 - 54
•
36 - 44
•
35
•
25 - 34
•
18 - 24
•
Under 18
Detail
53
Beginning Your Workout
Setting Setting
Options
Default
Value
Access
Weight •
170
Admin/Tech: Enter weight
as a value or a
None
range.
Over 310
•
290 - 309
•
270 - 289
•
250 - 269
•
230 - 249
•
210 - 229
•
190 - 209
•
171 - 189
•
170
•
150 - 169
•
130 - 149
•
110 - 129
•
Under 110
Detail
Adjusting the Workout Intensity
To adjust the equipment incline, speed, and/or resistance,
use the motion controls located just below the console keys.
Figure 16: Motion controls
54
Operating and Maintaining the P80 Console
Adjust the motion controls, upward or downward, to change
the incline, speed, or resistance.
Figure 17: Adjust motion controls up or down
Many preset workouts will adjust these settings automatically
to meet the workout intensity. At any time during a workout,
you can adjust control settings and override the default
workout settings.
Viewing Your Workout Status While Exercising
The Status Bar contains status measurements and is visible
across the top of the viewing screen. Information displayed in
the Status Bar helps you measure how your body is
responding to the exercise session. The default status
measurements displayed are:
Total Distance
Calories Burned
Time Remaining
Average Speed (displayed as strides per minute, pace, or
RPM depending on equipment type)
 Heart Rate
You can modify how a measurement appears in the Status
Bar. For example, you can view the length of your exercise
session as time elapsed, or as time remaining.




There are two ways to modify the display:


Change the default value setting.
Change the view on the Status Bar.
To modify the status measurement using the Status Bar:
1. On the Status Bar, touch the corner arrow on the status
category to pull down the menu.
2. On the drop-down menu, touch an alternate display
measurement to display in the Status Bar.
The alternate measure moves to the top of the Status Bar
and replaces the default measurement. The menu closes.
55
Beginning Your Workout
3. Touch the arrow again to retract the menu.
4. Repeat with any status category to customize your
workout status view.
Note: Administrators and registered service technicians
can override status settings.
Scoring Your Fitness Workout
This information helps you interpret your score for the Test
Your Fitness workout.
The score for this test is determined by this formula: Rate of
oxygen (O2) consumption, in ml per minute, modified for the
user’s maximum heart rate (220 - age), divided by the user’s
weight in kilograms.
Table 13. Fitness score reference tables
Low Fitness Level
Age
Low Fitness Male
Low Fitness Female
28 - 39
< 35
< 28
40 - 49
< 35
< 26
50 - 59
< 29
< 24
60 and over < 24
< 22
Medium Fitness Level
Age
Medium Fitness Male Medium Fitness Female
28 - 39
35 - 42
28 - 33
40 - 49
32 - 39
26 - 31
50 - 59
29 - 36
24 - 29
60 and over 24 - 31
22 - 26
High Fitness Level
Age
High Fitness Male
High Fitness Female
28 - 39
> 42
> 33
40 - 49
> 39
> 31
50 - 59
> 36
> 28
60 and over > 31
> 26
56
Operating and Maintaining the P80 Console
Introducing Preva® Accounts to Your Users
Important: Some Preva features are available only to Preva
subscribers. Contact Precor to update your subscription.
Creating a Preva Account
Preva is a personalized fitness experience specifically
designed and built to help your users achieve their goals.
Users can create their own personal profile, set up weekly
goals, track progress, and earn fun badges along the way.
They can also save their favorite workouts so that they can
replay that same workout at another time.
To create an account, touch Sign In.
You will be prompted to add a few items of personal
information, including age, and weight. Once you have
entered this information, it is saved to your Preva account.
Next time you sign in on Preva-equipped fitness equipment,
your Preva account information will load and you can begin
your workout immediately. In addition, the Sign In key on the
Welcome screen becomes a Favorites key. Use this function to
save your favorite workouts so you can use them again at
another time.
Note: Currently, once your account has been created, you
cannot update account information other than weight.
Table 14. Account information
Information
Type
Description
Email Address Provide a working email address.
Password
Create a password that is a minimum of eight
characters.
Age
Enter your age as your date of birth. Your age is
used to calculate calories used during workouts.
Important: A user must be at least 13 years old to
create a personal account.
Weight
Your weight is used to calculate workout metrics.
You can update this value as needed to reflect your
current weight.
Display Name The name displayed on the Welcome screen when
you sign in. Limited to ten characters.
57
Beginning Your Workout
Creating a Goal
Important: Some Preva features are available only to Preva
subscribers. Contact Precor to update your subscription.
Use the Weekly Goal panel to create a workout goal. When
you set up your goal, you commit to:
A target value (distance, duration, or calories) for each
workout.
 A specific number of times you plan to work out each
week.
Preva will track your progress based on the target you define
and keep track of your lifetime totals.

Touch Lifetime Totals to view the badges you have earned.
To set up a weekly goal:
1. On the Weekly Goal panel, touch the Weekly Goal
button.
2. On the Weekly Goal panel, touch the number of days you
plan to work out each week.
3. On the Choose a Target panel, touch the target that best
represents your fitness goal:
 Distance - How many (miles or kilometers) per
workout?
 Duration - How much time will you spend working out
each day?
 Calories - How many calories will you burn per
workout?
4. Enter the values required to meet your fitness goal, then
touch Next.
Table 15. Target Values
Target
Minimum and Maximum Values
Default
Distance Maximum - 50 miles / 80 km
Minimum - 1 mile / 1 km
3 miles/5 kilometers
Duration Maximum - 120 minutes
Minimum - 10 minutes
30 minutes
Calories
350
Maximum - 1000 calories
Minimum - 100 calories
58
Operating and Maintaining the P80 Console
5. Enter your Weight, then touch Next.
6. On the Current Focus panel, touch the button that best
represents your fitness goal.
Table 16. Current Focus Values
Current Focus
Definition
Be Fit
Condition your cardiovascular system.
Lose Weight
Burn calories and fat.
Get Toned
Tone your gluteal region, thighs, and calf muscles.
Push
Performance
Choose a high-intensity interval program or work
on distance training.
The Weekly Goal Summary panel provides a summary of the
information you selected to create your weekly fitness goal.
You can update or change your weekly target values at any
time.
Tracking Your Progress Toward Your Goal
Use the Weekly Goal panel to update your weekly goal, track
your progress, and view your lifetime totals. The Goal
CompassTM is a graphic summary of your weekly progress
toward your goal.
Figure 18: Weekly Goal progress
59
Beginning Your Workout
Table 17. Interpreting the Weekly Progress Panel
Number Setting
Definition
This Week’s
Progress
Days remaining to reach your goal. A
workout week begins on Monday and
ends on Sunday.
On Track/Off
Track Status
When you set up your goal, you commit
to a target value for each workout and to
work out a number of times each week. If
you have exceeded your workout targets
in any previous workout, this value
shows you how much ahead of pace you
are.
If you did not reach the workout target
value in any previous workouts this
week, the Goal Status displays the total
amount you must make up in the
remaining workouts to achieve your
weekly goal. As you work out and catch
up, this value decreases.
Off Track
Deficit
Shows how much exercise you need to
do to catch up to your weekly goal.
If you have not hit your workout targets
in any previous workouts this week, the
Off Track Deficit provides a visual
indication that you need to do more in
each remaining workout to achieve your
weekly goal. As you catch up, the size of
this area decreases.
Weekly Goal
Remaining
Represents the total effort remaining to
reach your goal.
This value reflects what you committed
to when you set up your weekly goal,
minus what you have already done this
week.
Real-time
Progress
Shows what you have achieved toward
your goal, and updates in real-time
during the workout.
60
Operating and Maintaining the P80 Console
Weekly Goal
Summary
Displays the portion of your weekly goal
that you have already completed both as
a fraction and as a percentage.
Target Marker
(blue)
The target marker shows how much
exercise you committed to completing in
each workout to reach your weekly goal.
Suggested
Target Marker
(yellow)
If you are off pace for the week, the
Suggested Target Marker shows how
much additional exercise you should
complete in each remaining workout to
reach your weekly goal.
Workout
Target
Displays how much exercise you should
complete in each workout to reach your
weekly goal. This number is the value
you set when you created your weekly
goal.
Suggested
Target
Displays how much exercise you should
complete today to reach your weekly
goal. This number is equal to the current
Off Track Deficit divided by the number
of remaining times you have committed
to work out over the rest of the week,
plus your normal daily target.
When you set up your goal, you commit
to a target value for each work out and to
workout out a number of times each
week. If you did not reach the workout
target value in any previous workouts
this week, the Suggested Target helps
you understand exactly how much more
you should exercise in the remaining
workouts to achieve your weekly goal.
Note: In this example, the user is off
track by 100 calories and has 4 workouts
remaining. 100 / 4 = 25. The 25 is added
to the target (350) to get the suggested
target (375).
Beginning Your Workout
61
Preva Tokens
Once you create a Preva account on a P80 console, you can
use a Preva token to sign into that personal account. Contact
Precor for more information on Preva tokens.
To sign into your personal account, hold your Preva token to
the token icon in the upper right corner of the console.
Figure 19: Preva token icon
A Preva token can only be associated with one account at a
time. If you lose a token, that token becomes obsolete once
you associate a new token with your account.
62
Operating and Maintaining the P80 Console
Chapter
5
Maintenance
To keep the equipment functioning properly, perform the
minor maintenance tasks in this section at the intervals
suggested. Failure to maintain the equipment as described in
this section could void the Precor Limited Warranty.
DANGER
To reduce the risk of electrical shock, always
disconnect the equipment from its power source
before cleaning it or performing any maintenance
tasks. If the equipment uses an optional power
adapter, disconnect the adapter.
Cleaning the Console and Display
The console and screen require little maintenance once
installed. Precor recommends that you clean the console and
screen before and after each exercise session.
To remove dust and dirt from the console:
 Wipe all exposed surfaces with a soft cloth that you have
moistened with a solution of 30 parts of water to 1 part of
Simple Green® (for more information, visit
www.simplegreen.com).
64
Operating and Maintaining the P80 Console
To clean the screen:
 The manufacturer recommends diluting one part 91%
isopropyl alcohol solution in one part water, or using the
91% isopropyl alcohol solution in its original strength. Be
sure to follow the solvent manufacturer’s precautions and
directions when using any solvent.
CAUTION: Potentially hazardous situations associated with the
use of isopropyl alcohol may result in minor or moderate injury
and property damage. To avoid these situations, follow all
instructions and recommendations in the manufacturer’s Material
Safety Data Sheet and product label.
Important: Do not use any acidic cleaners. Doing so will weaken
the paint or powder coatings and void the Precor Limited
Warranty. Never pour water or spray liquids directly on the
console or console’s screen.



It is important to avoid using any corrosive chemicals on the
console or screen.
Always dampen the cloth and then clean the screen. Be sure
to spray the cleaning liquid onto the cloth, not the screen, so
that drips do not seep into the console.
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty
cloths.
Changing the Belt (Newer Model AMT Only)
The AMT uses belts to provide motion. These belts eventually
wear and must be replaced.
When the belt stride count reaches 90 million, the message
BELTS MUST BE CHANGED SOON scrolls on the Welcome
screen. While this message appears, the AMT operates
normally.
Important: If this message displays on your AMT, please contact
Precor Customer Support for assistance.
When the belt stride count reaches 100 million (and the belt
has not been changed), the message BELTS CHANGE
REQUIRED scrolls continuously on the Welcome screen. The
input keys are not functional and the user cannot enter values
or begin a workout until the belts are changed. Please contact
Precor Customer Support to schedule a belt change.
Operating and Maintaining
P80 Console
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
P80 OM 301407-710 rev K, en
March 2013
Assembling and Maintaining
UBK 800-Series
Upright Exercise Bikes
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
UBK 800-Series PAG/OM 300715-241 rev D
Warranty #36286-114
October 2012
Edition Information
ASSEMBLING AND MAINTAINING UBK 800-SERIES
UPRIGHT EXERCISE BIKES
P/N 300715-241 rev D
Copyright © October 2012 Precor Incorporated. All rights
reserved. Specifications subject to change without notice.
Trademark Note
Precor, AMT, EFX, and Preva are registered trademarks of
Precor Incorporated. Other names in this document may be
the trademarks or registered trademarks of their respective
owners.
Intellectual Property Notice
All rights, title, and interests in and to the software of the
Preva Business Suite, the accompanying printed materials,
any copies of such software, and all data collected via the
Preva Business Suite, are exclusively owned by Precor or its
suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning
designs of exercise equipment. Precor aggressively seeks U.S.
and foreign patents for both the mechanical construction and
the visual aspects of its product design. Any party
contemplating the use of Precor product designs is hereby
forewarned that Precor considers the unauthorized
appropriation of its proprietary rights to be a very serious
matter. Precor will vigorously pursue all unauthorized
appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
1-800-347-4404
http://www.precor.com
Important Safety Instructions
Important: Save these instructions for future reference.
Read all instructions in the documentation provided with your
exercise equipment, including all assembly guides, user
guides, and owner’s manuals, before installation of this
device.
Note: This product is intended for commercial use.
The display apparatus (hereinafter referred to as the console)
is intended to be shipped with new Precor exercise equipment
(hereinafter referred to as the base unit). It is not packaged for
individual sale.
WARNING
To prevent injury, the console must be
attached securely to the base unit following all
assembly and installation instructions shipped
with the base unit. The console is intended to
be connected to AC mains power through the
furnished power supply ONLY. It should be
powered on only when installed as described
in the assembly and installation instructions
shipped with the base unit. The console is
intended for use only with Precor fitness
equipment, not as a standalone device.
4
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Safety Precautions
Always follow basic safety precautions when using this
equipment to reduce the chance of injury, fire, or damage.
Other sections in this manual provide more details of safety
features. Be sure to read these sections and observe all safety
notices. These precautions include the following:






Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
Make sure all users see a physician for a complete
physical examination before they begin any fitness
program, particularly if they have high blood pressure,
high cholesterol or heart disease; have a family history of
any of the preceding conditions; are over the age of 45;
smoke; are obese; have not exercised regularly in the past
year; or are taking any medication.
French equivalent of the above notice, for Canadian
markets: Il est conseillé aux utilisateurs de subir un examen
médical complet avant d’entreprendre tout programme
d’exercice, en particulier s’ils souffrent d’hypertension
artérielle, ou de cardiopathie ou ont un taux de cholestérol
élevé, s’ils ont des antécédents familiaux des précédentes
maladies, s’ils ont plus de 45 ans, s’ils fument, s’ils sont
obèses, s’ils n’ont pas fait d’exercices réguliers au cours de
l’année précédente ou s’ils prennent des médicaments. Si vous
avez des étourdissements ou des faiblesses, arrêtez les
exercices immédiatement.
Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Never leave the equipment unattended when it is plugged
in. Unplug the equipment from its power source when it is
not in use, before cleaning it, and before providing
authorized service.
Note: The optional power adapter is considered a power
source for self-powered equipment.
Use the power adapter provided with the equipment. Plug
the power adapter into an appropriate, grounded power
outlet as marked on the equipment.
Important Safety Instructions








Care should be taken when mounting or dismounting the
equipment.
For Treadmills: Do not use typing or web surfing features
while walking at speeds that exceed a slow and relaxed
leisurely pace. Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
For AMT and EFX: Always stabilize yourself by holding a
stationary handle bar while using typing or web surfing
features.
Read, understand, and test the emergency stop
procedures before use.
Keep the power cord or optional power adapter and plug
away from heated surfaces.
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
Assemble and operate the equipment on a solid, level
surface.
5
6
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes






SPACING—The below minimum spacing
recommendations are based on a combination of the
ASTM (U.S.) voluntary standards and EN (European)
regulations as of October 1, 2012, for access, passage
around, and emergency dismount:
 Treadmills—a minimum of 0.5 m (19.7 in.) on each
side of the treadmill and 2 m (78 in.) behind the
machine.
 Cardio equipment other than treadmills—a
minimum of 0.5 m (19.7 in.) on at least one side, and
.5 m (19.7 in.) behind or in front the machine.
Careful consideration should be given to the
requirements of the Americans with Disabilities Act
(ADA), US Code 28 CFR (see Section 305). ASTM
standards are voluntary and may not reflect current
industry standards. The actual area for access, passage
around, and emergency dismount is the responsibility of
the facility. The facility should consider the total space
requirements for training on each unit, voluntary and
industry standards, and any local, state, and federal
regulations. Standards and regulations are subject to
change at any time.
Important: These spacing recommendations should be used
when positioning equipment away from sources of heat, such
as radiators, heat registers, and stoves. Avoid temperature
extremes.
Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
When using the treadmill, always attach the safety clip to
your clothing before beginning your workout. Failure to
use the safety clip may pose a greater risk of injury in the
event of a fall.
Keep in mind that heart rate monitors are not medical
devices. Various factors, including the user’s movement,
may affect the accuracy of the heart rate readings. The
heart rate monitors are intended only as exercise aids in
determining heart rate trends in general.
Do not operate electrically powered equipment in damp
or wet locations.
Never operate this equipment if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or exposed to water. Call for service
immediately if any of these conditions exist.
Important Safety Instructions










7
Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of the
owner’s manual. Inspect the equipment for incorrect,
worn, or loose components, and then correct, replace or
tighten prior to use.
If you plan to move the equipment, obtain help and use
proper lifting techniques.
Equipment Weight Restrictions: Do not use the treadmill
if you weigh more than 500 pounds (225 kg). If you weigh
more than 350 pounds (160 kg), do not run on the
treadmill. For all other fitness equipment, the weight limit
is 350 pounds (160 kg).
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor. Such
attachments may cause injuries.
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
Do not use outdoors.
Do not attempt to service the equipment yourself, except
to follow the maintenance instructions in the owner’s
manual.
Never drop or insert objects into any opening. Keep hands
away from moving parts.
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk injury due
to electric shock. Read the assembly and maintenance guide
before operating. There are no user-serviceable parts inside.
Contact Customer Support if the equipment needs servicing. For
use with single phase AC power only.
8
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Educating Users
Take time to educate users about the Important Safety
Instructions found in both the User Reference Manual and
Product Owner’s Manual. Explain to your club or facility
patrons that they should observe the following precautions:



Hold onto a stationary handrail or handlebar while
assuming the starting position on the equipment.
Face the console at all times.
Hold on to a stationary handrail or handlebar with one
hand whenever you operate the console keys with the
other hand.
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the environment.
Federal law requires proper disposal of these batteries.
If you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
Product Recycling and Disposal
This equipment must be recycled or discarded according to
applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the return
and recycling of used equipment as applicable throughout the
European Union. The WEEE label indicates that the product is
not to be thrown away, but rather reclaimed upon end of life
per this Directive.
In accordance with the European WEEE Directive, electrical
and electronic equipment (EEE) is to be collected separately
and to be reused, recycled, or recovered at end of life. Users
of EEE with the WEEE label per Annex IV of the WEEE
Directive must not dispose of end of life EEE as unsorted
municipal waste, but use the collection framework available
to customers for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any potential
effects of EEE on the environment and human health due to
the potential presence of hazardous substances in EEE. For
proper collection and treatment, refer to Obtaining Service.
9
Important Safety Instructions
Regulatory Notices for the RFID Module
When equipped with a control console as described in this
document, this equipment may include a radio-frequency
identification (RFID) module. The RFID module has been
certified to operate at temperatures between -20°C and 85°C
(-4°F and 185°F).
Radio Frequency Interference (RFI)
The RFID module conforms to the following national
standards defining acceptable limits for radio frequency
interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, can cause
harmful interference to radio communications.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING
Per FCC rules, changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the
equipment.
10
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Industry Canada
This device complies with RSS-210:2007 of the Spectrum
Management & Telecommunications Radio Standards
Specification. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
1999/5/EC R&TTE Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:









EN 55022
EN 300 330-1 V1.5.1
EN 300 330-2 V1.3.1
EN 301 489-3 V1.4.1
EN 301 489-1 V1.8.1
EN 60950-1
11
Important Safety Instructions
Regulatory Notices for Cardiovascular
Exercise Equipment
The regulatory information in this section applies to the
exercise equipment and its control console.
Safety Approvals for Cardiovascular Equipment
Precor equipment has been tested and found to comply with
the following applicable safety standards.
Cardiovascular Type Equipment:
 CAN/CSA, IEC, EN 60335-1 (Household and similar

electrical appliances - Safety)
EN 957 (Stationary training equipment, class S/B
compliant equipment)
PVS and P80 Regulatory Notice
This Precor equipment has been tested and found to comply
with the following applicable safety standards.

CAN/CSA, UL, IEC, EN 60065 (Audio, video and similar
electronic apparatus - Safety)
Radio Frequency Interference (RFI)
This Precor exercise equipment conforms to the following
national standards defining acceptable limits for radio
frequency interference (RFI).
Federal Communications Commission, Part 15
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a commercial
installation. The equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the owner’s manual instructions, may cause
harmful interference to radio communications.
WARNING
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
12
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Industry Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
Directive compliance has been verified to the following
standards:







EN 55022
EN 55024
EN 60335-1
EN 60065 (P80 and PVS)
Important Safety Instructions
13
Electrical Recommendations: All Equipment
Excluding Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be
followed.
For equipment fitted with a P80 console or Personal Viewing
System (PVS) screen a separate power connection is
required. For a 20 amp branch circuit up to 10 screens can be
connected. If the branch circuit has any other devices plugged
into the circuit, then the number of screens must be reduced
by the wattage of the other devices.
Note: The typical splitter power cords that have IEC-320 C13
and C14 plugs have a recommended maximum capacity of
five screens.
Figure 1: IEC-320 C13 and C14 plugs
Obtaining Service
Do not attempt to service the equipment except for
maintenance tasks. If any items are missing, contact your
dealer. For more information regarding customer support
numbers or a list of Precor authorized service centers, visit
the Precor web site at http://www.precor.com.
14
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Obtaining Updated Documentation
Current Precor product documentation is available at
http://www.precor.com/productmanuals. You may want to
check in for updated information from time to time.
Table of Contents
Important Safety Instructions .................................................... 3
Safety Precautions ................................................................................ 4
Educating Users .................................................................................... 8
Hazardous Materials and Proper Disposal .................................... 8
Product Recycling and Disposal ....................................................... 8
Regulatory Notices for the RFID Module ....................................... 9
Regulatory Notices for Cardiovascular Exercise
Equipment ....................................................................................... 11
Electrical Recommendations: All Equipment
Excluding Treadmills ................................................................... 13
Obtaining Service................................................................................. 13
Obtaining Updated Documentation ...............................................14
Assembling the Exercise Bike....................................................17
Unpacking the Equipment ................................................................. 18
Hardware Kit (not to scale) .............................................................. 19
Required Tools ...................................................................................... 19
Installing the Upright Support and Cables ...................................20
Installing the Bottle Holder .............................................................. 24
Installing the Handlebars .................................................................. 25
Making Sure the Unit Is Stable ........................................................ 26
Breaking in the Equipment ............................................................... 26
Installing the Console ............................................................... 27
Threading the Cable Assembly (P80) .......................................... 28
Connecting Cables (P80) ................................................................. 30
Completing the Console Installation (P80)................................. 36
Threading the Cable Assembly (P30 and P10) .......................... 36
Connecting Cables (P30 and P10) ................................................. 38
Completing the Console Installation (P30 and P10)..................41
Verifying That the Heart Rate Display Is Operational .............. 42
16
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Maintenance .............................................................................. 43
Daily Cleaning ..................................................................................... 43
Daily Inspection .................................................................................. 44
Quarterly Maintenance .................................................................... 45
Storing the Chest Strap..................................................................... 45
Moving the Equipment ..................................................................... 46
Long-Term Storage ............................................................................ 46
Self-Powered Features.............................................................. 47
Informational Displays Prior to Shutdown .................................. 48
Symptoms of a Low Battery ............................................................ 48
Using the Optional Power Adapter ............................................... 49
The Optional Power Adapter Kit.................................................... 49
Replacing the Battery ........................................................................ 50
Commercial Cardiovascular Equipment Limited Warranty......51
Chapter
1
Assembling the Exercise Bike
Important: The instructions in the following procedures are
described from the perspective of a person standing directly in
front of the equipment (that is, on the opposite side of the
control console from a person using the equipment). These
descriptions may not match the names of certain parts in the parts
list, because such parts are named relative to the back of the
equipment.
To prepare the exercise bike for assembly:
 Open the box and assemble the components in the
sequence presented in this guide.
 Assemble and operate your equipment on a hard, level
surface in the area intended for use.
Important: Do not grasp any plastic parts of the unit while
lifting or moving the unit. The plastic parts are non-structural
covers and are not capable of supporting the weight of the
unit.
 Assemble the equipment according to the guidelines in
this manual to ensure you do not void the Precor Limited
Warranty.
Important: Any damage caused during installation is not
covered by the Precor Limited Warranty.
 Attach all fasteners and partially tighten them. Do not
fully tighten fasteners until instructed to do so.
WARNING
You will need assistance to assemble this unit.
DO NOT attempt assembly by yourself.
18
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Unpacking the Equipment
The shipping container for Precision Series exercise bikes
consists of the following items:



Wooden pallet
Cardboard base
Cardboard cover
WARNING
Do not attempt to move the equipment off of
the pallet by yourself. Have at least one other
person help you, and use safe lifting
techniques.
To unpack the bike:
1. Carefully remove all staples securing the cover to the
cardboard base.
2. Lift the cover upward and set it aside.
3. Carefully remove any staples holding the cardboard
spacers in place at the ends of the container.
4. Pull the cardboard spacers away from the equipment and
set them aside.
5. Cut all plastic ties securing the equipment in place.
6. Remove the upright support from the container and set it
down near the spot where you plan to install the
equipment.
7. With the help of at least one other person, lift the body
assembly and move it forward until its front legs can be
lowered to the floor.
8. With the help of at least one other person, carefully tilt
the body assembly forward until it rests on the wheels
attached to the front legs. Roll it to the location where you
plan to install it, then tilt it back until it rests flat on the
floor.
19
Assembling the Exercise Bike
Hardware Kit (not to scale)
Before you begin the assembly, verify that the following
hardware items are packed with the equipment.
Fasteners
Required Tools





³₈-inch hex wrench
¹₄-inch hex wrench
⁵₃₂-inch hex wrench
#2 Phillips screwdriver
Wire cutter
Quantity
⁵₁₆-inch x ³₄-inch
sockethead screw
4
¹₄-inch x ⁵₈-inch
flathead machine screw
4
#8 x ⁵₈-inch
self-tapping screw
2
Upright support
mounting screw
2
Flat washers ⁵₁₆-inch
4
20
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Installing the Upright Support and Cables
DANGER Do not attempt to connect electrical power until
all assembly procedures are complete and the
console is properly installed.
Before you begin this procedure, retrieve the cables for the
console that you plan to install on this exercise bike. The
cables are packed with the console.
Note: You will need the help of another person while
performing the procedure.
To prepare the bike for installation of the upright support:
1. Retrieve the cables from the box in which the console was
shipped.
2. Using a #2 Phillips screwdriver, remove the two #10 x
1-inch self-tapping screws holding the rear cover in place.
Pull the upright rear cover back to remove it, then set it
aside.
Figure 2: Rear cover removal
3. Remove the two #10 x 1-inch self-tapping screws holding
the top cover in place, then lift it off.
Figure 3: Top cover removal
Assembling the Exercise Bike
21
4. Remove the four #10 x 1-inch self-tapping screws holding
the left side cover in place, then pull the cover away from
the body assembly. Guide the cover around the pedal
crank, then remove it and set it aside.
Figure 4: Side cover removal
5. Remove the tape holding the base unit data cable in place
inside the upright support channel.
6. Slide the jack panel up and out of its bracket in the right
side cover.
To install the upright support and prepare the cables for
connection to the console:
1. Remove the nut and washer from one end of the F-type
coaxial coupler packed with the P80 console. Insert that
end of the coupler through the round opening in the jack
panel.
2. Place the washer back onto the coaxial coupler, followed
by the nut. Use two ⁷₁₆-inch open-end wrenches to secure
the coupler; hold the coupler in place with one wrench
while tightening the nut with the second wrench.
3. Locate the tabbed end of the modular plug coupler. Snap
this end of the coupler into the square opening in the jack
panel.
4. Slide the quick-disconnect terminal on the grounding lead
of the power cable over the grounding terminal on the
equipment frame.
5. Attach the lower ends of the following cables to the inner
side of the jack panel:
 Ethernet cable
 Television cable (for P80 console)
 Power cable (for P80 console)
6. Slide the jack panel back into its bracket in the right side
cover.
22
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
7. Using a piece of tape or a plastic tie, bind together the
upper ends of all cables.
8. While your assistant holds the upright support in place
over the body assembly, thread the cables upward
through the support. When you are finished, use a piece
of tape to secure the upper connectors of the cables at
the top of the support.
9. Slide the upright support into position so that its screw
holes line up with the corresponding holes on the body
assembly, as shown in the following illustration.
Note: If the support is positioned correctly, it rests on a
metal tab in the upright support channel.
Figure 5: Upright support insertion
Important: In the following step, be extremely careful not to
trap or pinch any of the cables between the mounting screws
and their seats.
Assembling the Exercise Bike
23
10. Insert the two upright support mounting screws through
the openings on the support and into the screw holes on
the body assembly. Tighten the mounting screws
completely using a ³₈-inch hex wrench.
Figure 6: Bolting the upright support into place
Important: In the following two steps, be extremely careful
not to trap or pinch any of the cables between the bike frame
and any of the covers.
11. Reposition the left side cover on the body assembly, then
reattach and tighten the #10 x 1-inch self-tapping screws
holding it in place.
12. Repeat the previous step to reinstall the top and rear
covers.
24
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Installing the Bottle Holder
The bottle holder attaches to a plastic support that has been
mounted on the upright support at the factory.
To install the bottle holder:
1. Position the bottle holder on its support so that the three
tabs on the bottle holder fit into the three rectangular
holes in the support.
2. Secure the bottle holder onto its support using the two #8
x ⁵₈-inch self-tapping screws, as shown in the following
illustration.
Figure 7: Installing the bottle holder
Assembling the Exercise Bike
25
Installing the Handlebars
After the upright support and the bottle holder are securely in
place, install the handlebar assembly and route the heart rate
sensor cable through the support.
To install the handlebars:
1. Position the handlebars over the brackets near the top of
the upright support, as shown in the following illustration.
The open ends of the assembly should face up and
forward.
Figure 8: Installing the handlebars
2. Feed the heart rate cable through the nearest end of the
bracket and into the upright support.
3. Have your assistant pull the end of the heart rate cable
through the console mount at the top of the upright
support.
4. Place four ⁵₁₆-inch flat washers onto four ⁵₁₆-inch x
³₄-inch sockethead screws. Place the handlebar assembly
onto the brackets and attach the four sockethead screws
with their washers. Tighten the screws completely using a
¹₄-inch hex wrench.
26
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Making Sure the Unit Is Stable
Make sure the unit is level before allowing anyone to use it.
CAUTION: To eliminate movement, make sure the adjustable feet
are in contact with the floor.
To level the unit:
1. Gently rock the unit. If there is any movement, ask your
assistant to tip the unit to one side while you locate the
adjustable feet.
2. Correct the height of each adjustable foot as follows.
If you want to … Then turn the adjustable feet …
Raise the unit
Counterclockwise
Lower the unit Clockwise
Important: Place the unit on a flat surface. Rotating the
adjustable feet cannot compensate for extremely uneven surfaces.
When you are finished adjusting the unit, place the unit on the
floor and recheck that it is level.
Breaking in the Equipment
Precor equipment does not require an actual break-in period.
However, moving components such as belts, gears, and
bearings can settle while the equipment is being stored or
shipped. This can cause the equipment to operate with a
small amount of roughness or noise when it starts up for the
first time.
The equipment usually returns to smooth operation after a
day or two of normal use. If it does not, contact your dealer
for assistance. For more information, refer to Obtaining
Service.
Chapter
2
Installing the Console
To make installation easier, all Precor Experience Series
consoles use the same mounting hardware and connector
locations whenever possible. The installation sequence for
any of them is as follows:
Threading the cable assembly
Connecting cables
Completing the installation (tightening the mounting
screws and attaching the back cover)
The following sections describe how to perform these tasks.



28
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Threading the Cable Assembly (P80)
Earlier in the installation, you threaded the necessary cables
through the frame of the base unit and out the passthrough
opening in the console mount. As you line up the back plate
on the console with the console mount, you must make sure
that the cable assembly passes correctly through the
openings in both components.
Important: Before you begin the following procedure, remove the
rear cover from the control console. To remove the cover, use your
fingernails to pry the lower edge loose, then swing the cover up
and out as shown in the following illustration.
Figure 9: Removing the access cover from the P80 console
To thread the cable assembly:
1. Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
2. Position the console over the console mount.
29
Installing the Console
3. Rest the console on the console mount so that the notch
on the bottom of the console’s back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 10: Console positioning on base unit
4. Tilt the console forward until it stops. Use one hand to
steady the console in this position, or ask your assistant
to do so.
30
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Connecting Cables (P80)
After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 11: Cable connections, P80 console
31
Installing the Console
Table 1. P80 internal cable connections
Cable
Connector Type
Ethernet (LAN)
Eight-contact modular,
on round black cable
TV in
F-type coaxial
Power
Two-contact plug,
polarized and latched
Data from base unit
Eight-contact modular,
on flat gray cable
Heart rate sensors
Four-contact strip, keyed
Circuit
Connector
Location
Safety key (treadmills Six-contact strip, keyed
only)
CSAFE
Eight-contact modular,
on flat gray cable
Automatic stop
sensor (treadmills
only)
Vertical four-contact
strip, keyed
To simplify installation and maintenance, route and connect
cables 1 through 5 according to the following instructions.
Note: In the illustrations in this section, some cables are
omitted for the sake of clarity.
Connecting the Television Cable
The console’s television tuner is mounted inside the console’s
back plate. The tuner includes a short cable adapter that
allows the television cable to be connected outside the back
plate.
To connect the television cable:
1. Pull the cable out through the lower right corner of the
back plate.
2. Route the cable counterclockwise around the outside of
the back plate.
Important: In the following step, install the cable using a
torque wrench and torque not to exceed 8 lb-in. If a torque
wrench is not available, install the coaxial cable using a plain
wrench and tighten to "snug + ¹₄ turn." You may also use a
wrench on the internal nut to help tighten the connection.
32
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
3. Attach the connector on the cable to the connector on the
tuner cable and tighten the two connectors securely using
two ⁷₁₆-inch open-end wrenches. Position both
connectors above the upper right corner of the back plate.
4. Use a plastic tie to secure the connectors to the top of the
back plate. Pass the tie through the two small holes near
the upper right corner of the back plate, then wrap it
around the connectors and tighten it securely. Cut off and
remove the protruding end of the tie.
The following illustration shows how the cable is positioned
once it is installed.
Figure 12: Connecting the television cable
Installing the Console
33
Connecting the Ethernet and Base Unit Data Cables
Both the Ethernet and base unit data cables pass through the
cutaway opening at the upper right corner of the back plate
and connect to nearby modular jacks in the console. Because
of this, it is important to exercise caution when connecting
the cables. The black Ethernet cable connects to a jack just
underneath the perforated metal bracket at the very top of the
opening in the console. The gray base unit data cable
connects to a lower jack closer to the back plate.
Refer to the following illustration for the correct position of
both cables.
CAUTION: If you connect the base unit data cable to the wrong
jack, the equipment will not function.
Figure 13: Connecting the Ethernet and base unit data cables
34
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Connecting the Heart Rate Sensor Cable
The heart rate sensor cable passes through the cutaway
opening at the upper left corner of the back plate, then down
to the small circuit board at the lower left of the console. The
following illustration shows how the cable should look once it
is installed.
Figure 14: Connecting the heart rate cable
Installing the Console
Connecting the Power Cable
Route the power cable through the cutaway opening at the
upper left corner of the back plate. In the nearby opening
within the steel console framework, locate the socket that
matches the power cable plug and connect the power cable
to it.
Note: Be sure that the latch on the plug clicks into place on
the socket.
The following illustration shows how the cable should look
once it is installed.
Figure 15: Connecting the power cable
35
36
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Completing the Console Installation (P80)
Before you complete the final installation steps, double-check
the connections you have made. Make sure that all cables are
fully and securely connected, and that any unneeded cables
are tied back properly.
To complete the installation:
1. Feed extra cable back into the neck tube.
2. Tilt the control console backward (toward yourself) until
the tab on the top edge of its back plate slides along the
top edge of the console mount and the screw holes align
properly.
3. Insert the four ⁵₈-inch flat head screws through the holes
in the console mount and thread them into the holes in
the back plate on the console. Partially tighten the screws
using a ⁵₃₂-inch hex wrench.
4. Line up the two small tabs at the top of the console’s back
cover with the slots at the top of the opening in the
console case. Insert the tabs into the slots.
5. Insert the remaining tabs on the back cover with the
corresponding slots on the console case.
6. Press gently on the edges of the back cover to snap it into
place.
Threading the Cable Assembly
(P30 and P10)
Earlier in the installation, you threaded the necessary cables
through the frame of the base unit and out the passthrough
opening in the console mount. As you line up the back plate
on the console with the console mount, you must make sure
that the cable assembly passes correctly through the
openings in both components.
Important: Before you begin the following procedure, remove the
rear cover from the control console. Set the cover and its mounting
hardware aside for later use.
To thread the cable assembly:
1. Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
2. Position the console over the console mount.
37
Installing the Console
3. Rest the console on the console mount so that the notch
on the bottom of the console’s back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 16: Console positioning on base unit
4. Tilt the console forward until it stops. Use one hand to
steady the console in this position, or ask your assistant
to do so.
38
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
5. Pull all cables upward and forward until you can drape
them over the top of the console’s back plate.
Figure 17: Cable positioning
Connecting Cables (P30 and P10)
Important: Pass all cables through the semicircular opening just
above the console mount, as shown in the following figure. Do not
attempt to route any cables through other openings or through the
steel channel above the mount.
Figure 18: Cable routing from the mount into the console
Installing the Console
39
After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 19: Cable connections, P30 and P10 consoles
40
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Table 2. P30 and P10 internal cable connections
Cable
Connector Type
Safety key (treadmills
only)
Six-contact strip, keyed
Automatic stop sensor Four-contact strip,
(treadmills only)
keyed
Data from base unit
Eight-contact modular,
on flat gray cable
Heart rate sensors
Four-contact strip,
keyed
CSAFE
Eight-contact modular,
on flat gray cable
Circuit
Connector
Location
Installing the Console
41
Completing the Console Installation
(P30 and P10)
Before you complete the final installation steps, double-check
the connections you have made. Make sure that all cables are
fully and securely connected, and that any unneeded cables
are tied back properly.
To complete the installation:
1. Feed extra cable back into the neck tube.
2. Tilt the control console backward (toward yourself) until
the tab on the top edge of its back plate slides along the
top edge of the console mount and the screw holes align
properly.
3. Insert the four ⁵₈-inch flat head screws through the holes
in the console mount and thread them into the holes in
the back plate on the console. Partially tighten the screws
using a ⁵₃₂-inch hex wrench.
4. Line up the two small tabs at the bottom of the console’s
back cover with the slots at the bottom of the console
case. Insert the tabs into the slots.
5. Insert the two #8–32 x ¹₂-inch Phillips-head screws that
you removed earlier into the holes at the top edge of the
console’s back cover. Tighten the screws fully.
Important: Use caution not to pinch the cables between the
back cover and PVS mounting screw heads.
6. Fully tighten the four mounting screws (partially
tightened in step 3) using a ⁵₃₂-inch hex wrench.
42
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Verifying That the Heart Rate Display
Is Operational
To verify that the heart rate display is operational:
1. Begin exercising on the equipment.
2. Grasp both touch-sensitive handlebars.
Note: The heart rate is read within ten seconds. During
that time, the heart on the display flashes. You must
maintain contact with both metal plates on each
handlebar to ensure an accurate reading.
3. Look at the HEART RATE display. After a few seconds, a
number appears indicating your heart rate.
4. If a number does not appear in the HEART RATE display,
perform the following checks:
 Verify that the cable connection is properly
connected.
 Repeat the test with a different person. Although the
heart rate display is generally highly accurate, it may
not work properly for a few individuals.
Note: If you use wireless heart rate monitoring, repeat
this test using a chest strap or a wireless pulse simulator
instead of grasping the touch-sensitive handlebars.
Chapter
3
Maintenance
To keep the equipment functioning properly, perform the
minor maintenance tasks in this section at the intervals
shown on the maintenance checklist. Failure to maintain the
equipment as described in this section could void the Precor
Limited Warranty.
DANGER
To reduce the risk of electrical shock, always
disconnect the equipment from its power source
before cleaning it or performing any maintenance
tasks. If the equipment is self-powered but also
uses the optional power adapter, disconnect the
adapter.
Daily Cleaning
Precor recommends that you clean the equipment before and
after each exercise session. To remove dust and dirt from the
equipment, wipe all exposed surfaces with a soft cloth that
you have moistened with one of the following cleaners:


A solution of 30 parts of water to 1 part of Simple Green®
(for more information, visit www.simplegreen.com)
ENVIR-O-SAFE oxygen enhanced cleaner or multi-task
cleaner concentrate, diluted according to the
manufacturer’s instructions (for more information, visit
www.daleyinternational.com)
44
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Alternatively, you can clean the equipment with Athletix
fitness equipment cleaning wipes (for more information, visit
www.athletixproducts.com)
CAUTION: Read and follow the manufacturer’s instructions,
particularly dilution instructions, before using any cleaner on
Precor fitness equipment. Do not use concentrated cleaners at full
strength, or acidic cleaners of any kind; such cleaners weaken the
protective finish on the equipment and void the Precor Limited
Warranty. Never pour water or spray liquids onto any part of the
equipment. Allow the equipment to dry completely before using.
Vacuum the floor underneath the equipment frequently to
prevent the accumulation of dust and dirt that can interfere
with its operation. Use a soft nylon scrub brush to clean the
grooves on equipment with foot pedals.
Daily Inspection
At least once every day, examine the equipment for the
following problems:
Slipping belts
Loose fasteners
Unusual noises
Worn or frayed power cords
Any other indication that the equipment may be in need
of service
Important: If you determine that the equipment needs service,
disconnect all power connections (television, Ethernet, and power)
and move the equipment away from the exercise area. Place an
OUT OF SERVICE sign on the equipment and make it clear to all
patrons and other users that they must not use it.





To order parts or to contact a Precor authorized service
provider in your area, refer to Obtaining Service.
45
Maintenance
Quarterly Maintenance
Precor recommends that you clean and inspect the
equipment more thoroughly once every three months.
To perform quarterly maintenance:
1. Remove the cover panels.
2. Vacuum out any debris, being careful not to bring the
vacuum cleaner nozzle too close to any circuit board
(unless your vacuum cleaner is protected against static
buildup).
3. Check the tension of both belts.
4. Replace the cover panels.
5. Wipe the exterior of the console with a damp sponge or
soft cloth, and dry with a clean towel. Keep water away
from electronic components to prevent electrical shock or
damage.
6. Clean the touchscreen using a soft, lint-free cloth
dampened with a 91% isopropyl alcohol solution (either
full strength or diluted with an equal amount of water).
Storing the Chest Strap
If you purchased the optional heart rate chest strap, store it in
a place where it remains free of dust and dirt (for example, in
a closet or drawer). Be sure to protect the chest strap from
extremes in temperature. Do not store it in a place that may
be exposed to temperatures below 32° F (0° C).
To clean the chest strap, use a sponge or soft cloth dampened
in mild soap and water. Dry the surface thoroughly with a
clean towel.
46
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Moving the Equipment
The equipment is very heavy. If you plan to move it to a new
location, obtain the help of an adult assistant and use proper
lifting techniques. If the equipment includes roller wheels on
one end, use the wheels to reduce the load on yourself and
your assistant.
To move the exercise bike:
1. Disconnect, unplug, and remove all external connections
(television, Ethernet, and power).
2. Lift the rear feet to tip the bike forward onto its roller
wheels.
3. Push the bike into its new location.
4. Lower the rear feet to the floor.
Long-Term Storage
If you do not expect anyone to use the equipment for a long
time, perform the following tasks to prepare it for storage:



If it has a power cord, disconnect the cord.
If it has an optional power adapter, connect the adapter to
prevent damage to the internal battery.
Position it so that it will not become damaged and will not
interfere with people or other equipment.
Chapter
4
Self-Powered Features
Important: This chapter of the manual describes Precor fitness
equipment that can operate without being connected to AC
power. This includes units equipped with P30 or P10 consoles.
However, P80 consoles must be connected to AC power through
their power supplies to operate. For this reason, this chapter does
not apply to units equipped with P80 consoles.
On self-powered equipment, the system initializes and
displays the Welcome screen when a user starts exercising. A
minimum rate of motion must be maintained for the banner to
appear, as shown in the following table. When a person meets
the requirements, the power that is generated allows the
equipment to function properly.
Table 3. Minimum requirements for operation
Equipment Rate of Motion
AMT
40 strides per minute (SPM)
EFX
40 strides per minute (SPM)
Climber
30 steps per minute
Bike
20 revolutions per minute (RPM)
Informational displays appear when the battery is low or
when the rate of motion drops below the minimum
requirements. The display explains what to do to retain
power. If the messages are ignored, the equipment begins
shutdown procedures to maintain the charge of the battery.
Refer to Informational Displays Prior to Shutdown.
An optional power adapter can be purchased and provides
sustained power to the equipment. If you plan to change the
club settings on a unit equipped with a P30 or P10 console,
the power adapter is highly recommended. To purchase the
optional power adapter, check with your dealer. Refer to
Obtaining Service.
48
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Informational Displays Prior to Shutdown
The equipment saves its battery charge by moving into a
shutdown mode. If the user does not maintain the minimum
rate of motion, a 30-second shutdown process begins.
In this mode, the console displays a countdown indicator and
ignores all keypresses. If no movement is detected or the rate
of motion remains below the minimum, the indicator changes
as the countdown continues.
Note: The user can resume exercising before the countdown
period elapses and the workout will continue from the point at
which it was paused.
Important: If the equipment is connected to a CSAFE master
device, it follows a slightly different shutdown process. Ten
seconds before the equipment shuts down, it ends the exercise
session and displays a reset message while it disconnects from the
CSAFE master device. It ignores all keypresses during these last
ten seconds.
Symptoms of a Low Battery
If no one has used the equipment for an extended period of
time, the battery may need recharging.
Symptoms of a low battery include the following:
A flickering or erratic display
Loss of user and program information after the user stops
exercising, without any display of a workout summary or a
notification of pending shutdown
 Inability to decrease the incline setting (if any)
Important: To maintain a constant power source, use the optional
power adapter.


Self-Powered Features
49
Using the Optional Power Adapter
After connecting the power adapter to the equipment, plug
the opposite end into the appropriate power source (120 V or
240 V).
CAUTION: When the optional power adapter is in use, make sure
that the power supply cord does not create a safety hazard. Keep
it out of the way of traffic and moving parts. If the power supply
cord or power conversion module is damaged, it must be replaced.
The control console functions differently when the power
adapter is connected. Because the power adapter provides a
constant source of power, a user can pause for brief periods
without initiating shutdown procedures. When the pause time
limit expires and the user has not resumed exercising, the
console returns to the Welcome screen. The default pause
time is 30 seconds for all fitness equipment. Refer to the
manual for your control console for instructions on setting or
changing the pause time limit. To learn how to install the
power adapter, refer to The Optional Power Adapter Kit.
The Optional Power Adapter Kit
If you purchase the optional power adapter, you must also
purchase the internal cable kit. The kit supplies the cable,
bracket, and fasteners that connect the power adapter to the
lower electronics board.
CAUTION: The internal cable kit must be installed by authorized
service personnel. Do not attempt installation on your own as you
could void the Precor Limited Warranty. For more information,
refer to Obtaining Service.
Important: If this equipment includes a P80 console, the optional
power adapter and the internal cable kit must still be installed to
provide continuous power to the base unit and support its internal
battery.
Once the internal cable kit is installed, you can plug the
optional power adapter into the equipment. Plug the opposite
end into the appropriate power source for your equipment
(120 V or 240 V). Review the safety instructions found at the
beginning of this manual before using the power adapter.
50
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Replacing the Battery
The equipment’s battery is built to last for a long time.
However, if you feel that the battery may need replacing,
check with an authorized service technician. Refer to
Obtaining Service.
CAUTION: The battery stored inside the equipment contains
hazardous materials and must be disposed of according to
Hazardous Waste Regulations. Refer to Hazardous Materials and
Proper Disposal.
Chapter
5
Commercial Cardiovascular
Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE
USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU
ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND
CONDITIONS.
Limited Warranty.
Precor Incorporated warrants all new Precor products to be free from defects in materials
and manufacture for the warranty periods set forth below. The warranty periods
commence on the invoice date of the original purchase. This warranty applies only against
defects discovered within the warranty period and extends only to the original purchaser
of the product. Parts repaired or replaced under the terms of this warranty will be
warranted for the remainder of the original warranty period only. To claim under this
warranty, the buyer must notify Precor or your authorized Precor dealer within 30 days
after the date of discovery of any nonconformity and make the affected product available
for inspection by Precor or its service representative. Precor’s obligations under this
warranty are limited as set forth below.
Warranty Periods and Coverage.
All Commercial Cardiovascular Products (excluding StretchTrainer, Strength
Products, and coverage specific to certain models and options as defined
below):





Frame: 7 years
Treadmill drive motor: 5 years
Items subject to wear: 1 year
All other parts (including mechanical parts and electronic parts): 2 years
Labor: 1 year
880 Line Commercial Cardiovascular Products (superseding the coverage
above where applicable):


Labor on the P80 console: 2 years
High wear items on the P80 console, including headphone jack, USB connector, and
iPod® connector: 90 days
52
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Options / Accessories
Many options or accessories have components that are connected internally or mounted
inside the electronic console. The following guidelines determine the warranty for these
components. If the internal components are installed by the factory or by an authorized
dealer as part of the original sale and delivery, they have a warranty that is identical to the
warranty of the equipment in which they are connected or mounted. If the internal
components are not installed by the factory or by an authorized dealer as part of the
original sale and delivery, they have a 90 days parts and labor limited warranty. All
components that are not internally connected have a 90 days parts only limited warranty.
Satisfactory proof of purchase is required in all cases.
Conditions and Restrictions.
This warranty is valid only in accordance with the conditions set forth below:
1.
The warranty applies to the Precor product only while
a. it remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. it has not been subjected to accident, misuse, abuse, improper service, or
non-Precor modification.
c. claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring
not in compliance with electrical codes or Precor owner’s manual specifications, or
failure to provide reasonable and necessary maintenance as outlined in the owner’s
manual.
3. Precor is not responsible for Internet connectivity to its products. This restriction
applies to services, such as those provided by an Internet service provider (ISP), and
also to hardware related to Internet connectivity, such as Ethernet cabling, routers,
servers and switches.
4. Precor is not responsible for the quality of television, video, audio, or other media
supplied to its products. This restriction applies to services, such as those provided
by a cable or satellite television provider; to signal strength and clarity; and also to
hardware related to the reception and delivery of television, video, audio, and other
media. Such hardware can include (but is not limited to) audio, video, and
radio-frequency (RF) cabling, connectors, receivers, modulators, combiners,
distribution amplifiers, splitters, and so on.
5. Precor cannot guarantee that the heart rate measurement system on its products will
work for all users. Heart rate measurement accuracy varies based on a number of
factors, including the user’s physiology and age, the method in which the heart rate
measurement system is used, external interference, and other factors that may
influence heart rate acquisition.
6. Except in Canada, Precor does not pay labor outside the United States.
7. Warranties outside the United States and Canada may vary. Please contact your local
Dealer for details.
Commercial Cardiovascular Equipment Limited Warranty
53
This Limited Warranty shall not apply to:
1. Software version upgrades.
2. Software defects that do not materially and negatively affect the normal performance
of the product under normal conditions of use.
3. Consumable goods or cosmetic items of the product, the exterior of which has been
damaged or defaced as a result of abuse, misuse, accident, improper service or
installation, mishandling, or modification in design or construction not authorized by
Precor.
4. Repairs performed on Precor equipment missing a serial number or with a serial tag
that has been altered or defaced.
5. Service calls to correct installation of the equipment or instruct owners on how to use
the equipment.
6. Pickup and delivery involved with repairs.
7. Any labor costs incurred beyond the applicable labor warranty period.
Disclaimer and Release.
The warranties provided herein are the exclusive warranties given by Precor and
supersede any prior, contrary or additional representations, whether oral or written. ANY
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED
ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES
GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND
EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR
ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,
EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY
NONCONFORMANCE OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED
TO: (A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER
OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS (WHETHER
ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGATION, LIABILITY, RIGHT,
CLAIM OR REMEDY FOR LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer
and release shall apply even if the express warranty set forth above fails of its essential
purpose.
Exclusive Remedies.
For any product described above that fails to conform to its warranty, Precor will provide,
at their option, one of the following: (1) repair; (2) replacement; or (3) refund of the
purchase price. Precor Limited Warranty service may be obtained by contacting the
authorized dealer from whom you purchased the item. Precor compensates Servicers for
warranty trips within their normal service area to repair commercial equipment at the
customer’s location. You may be charged a trip charge outside the service area. THESE
SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY BREACH OF
WARRANTY.
54
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL
DAMAGES.
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY,
WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING
ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRICT LIABILITY), OR
OTHERWISE, FOR DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE,
REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT,
ADDITIONAL COSTS INCURRED BY BUYER (BY WAY OF CORRECTION OR
OTHERWISE) OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, WHETHER RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE
OR INABILITY TO USE THE PRODUCT. This exclusion applies even if the above warranty
fails of its essential purposes and regardless of whether such damages are sought for
breach of warranty, breach of contract, negligence, or strict liability in tort or under any
other legal theory. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which
vary from state to state.
Complete this portion and keep for your records.
Purchased From:
Example: Dealer or store name.
Phone Number:
Example: Dealer or store telephone number.
Product/model:
Example: AMT 885 or EFX 883.
Serial number:
The serial number is found on the shipping container.
Effective 1 November 2010
P/N 36286-114
Assembling and Maintaining
UBK 800-Series
Upright Exercise Bikes
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
UBK 800-Series PAG/OM 300715-241 rev D
Warranty #36286-114
October 2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement