Javelin S870-EX-KP
SYMMETRY
ACCESS CONTROL
DATASHEET | ACCESS CONTROL | S870-EX-KP PROXIMITY CARD READER
JAVELIN S870-EX-KP
PROXIMITY CARD READER
The Javelin S870-EX-KP is a proximity card reader with keypad
designed for extreme weather conditions and environments for
integrated access control. The attractive, contemporary black
and silver finish is designed to complement any office or building
environment.
The Javelin S870-EX-KP reads 125KHz HID proximity cards.
The Javelin S870-EX-KP is designed for use with the Symmetry range
of door controllers and is compatible with all versions of Symmetry
software.
The Javelin S870-EX-KP uses secure, bi-directional, pseudo-random
supervised MCLP communications to the door controller. Both the
card reader and cable are supervised, and an alarm will be generated if
the card reader is tampered with or communications lost.
Wiegand communication is also supported between the card reader
and controller.
EXTREME ENVIRONMENT
The membrane keypad has been designed to allow the S870–EX-KP
card reader to operate in extreme weather conditions, enabling full
functionality in heavy rain, seawater, freezing and snowy conditions.
KEY FEATURES
ƒƒ Proximity access control card reader for a wide range of security
applications
ƒƒ Designed to fit most standard electrical back boxes
ƒƒ Maximum read range of 4” (102mm) dependent on card
ƒƒ Reads 125KHz HID proximity cards
ƒƒ Secure, bi-directional, Pseudo-Random supervised MCLP
communications
ƒƒ Wiegand output
ƒƒ Integrated Door Pre-held warning buzzer
ƒƒ Multi-tone audio sounder for access granted, denied and PIN
prompt
ƒƒ LED feedback for verification of card accepted or rejected
ƒƒ Three color LED alert status indication
ƒƒ Operating Environment of -15°F to +158°F (-25°C to +70°C)
DATASHEET
ACCESS CONTROL | S870-EX-KP PROXIMITY CARD READER
SYMMETRY
ACCESS CONTROL
SPECIFICATIONS
Model Types
ƒƒ Javelin S870-EX-KP - HID 125KHz Keypad proximity card
reader
Communicating Distances
ƒƒ All Symmetry door controllers to Symmetry S870
(MCLP) = 3000ft/1000m
ƒƒ All Symmetry door controllers to Symmetry S870
(Wiegand) = 500ft/150m
3.5” (85 mm)
Dimensions inches (mm)
ƒƒ Width = 3.5” (85mm)
ƒƒ Height = 4.4” (113mm)
ƒƒ Depth = 0.9” (23mm)
Power Requirements
ƒƒ Nominal 12VDC (9-14V)
ƒƒ Maximum current consumption 120mA
4.4” (113 mm)
Operating Environment
ƒƒ -13°F to +158°F (-25°C to +70°C)
ƒƒ 15% to 90% Humidity, non-condensing
ª
APPROVALS
Radio regulatory approvals
ƒƒ FCC CFR47 Part 15C
ƒƒ EN 302291
0.9”
(23 mm)
EMC Type Testing
ƒƒ EN 301489
Access control product testing
ƒƒ IP44: R & TTE Directive 1999/5/E
ƒƒ UL 294
PURCHASING INFORMATION
3.5” (85 mm)
ƒƒ 870-EX-KP –Keypad proximity card reader for extreme
conditions
[email protected]
www.amag.com
11/15 © AMAG Technology, a G4S company 2015.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement