NSG 5500

NSG 5500
NSG 5500
The compact and modular NSG 5500 solution offers the generators necessary for tests with capacitive
discharge pulsed interference as called for by ISO, SAE, DIN and JASO, and others. The established test
specifications for passenger cars together with the new standards for commercial vehicles published
by these international and other bodies are fully covered, as are the most company-specific standards
from vehicle manufacturers. Based on our exclusive Gemini technology, Teseq offers the most flexible
and upgradeable system to protect the users’ investment.
Built-in 100 A coupler/battery
Clean, compliant pulses on the
single output
NSG 5500 system. This compact mainframe houses the common system components and accommodates the standard pulse generators. All testing is available from one output connector. An electronic
switch to connect and disconnect the battery supply is in-corporated in the NSG 5500. Additional inputs
and outputs are located on the rear panel for test execution control purposes and the monitoring of
error signals, oscilloscope triggers, gate start/stop commands, etc. Overall control is via a PC running
AutoStar™ under Windows.
All common international and
vehicle manufacturer standard
transients achieved in one compact solution
NSG 5500 modules. The NSG 5500 offers unpreced-ented flexibility for transient testing. Teseq has
designed a solution with various transients in one modular and upgradeable chassis. The basic ISO
7637 tests for pulse 1, 2a, 3, 5, 6 and 7 and variants are integrated into the same chassis. Optional pulse
4 and pulse 2b control is available, however, use with the NSG 5600 offers several benefits over this
budget solution. Additionally, when standards change, as they do every year, the NSG 5500 system may
be upgraded with different modules when necessary so that your new and old modules may both be
retained, either exchanged with new modules or loaded into an optional expansion chassis. Based on
our exclusive technology, Teseq offers the most flexible and upgradeable system in the world to protect
the users’ investment in test equipment.
All NSG 5500 generators are calibrated in accord-ance with ISO 7637-2:2004 or manufacturer-specific
standards. Teseq continues to maintain back-wards compatibility and yet push the state of the art for
EMC immunity testing.
For more details, see the complete catalog “Automotive Electrical Disturbances”.
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected] www.teseq.com
691-177A February 2011
© February 2011 Teseq ®
Specifications subject to change without notice.
Teseq ® is an ISO-registered company. Its products
are designed and manufactured under the strict
quality and environmental requirements of the ISO
9001. This document has been carefully checked.
However, Teseq ® does not assume any liability for
errors or inaccuracies.
A d v a n c e d Te s t S o l u t i o n s f o r E M C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF