Industrial Managed Gigabit Ethernet PoE+ Switch (4-Port RJ-45, 2

Industrial Managed Gigabit Ethernet PoE+ Switch (4-Port RJ-45, 2
LPH2004A-2GSFP
Industrial Managed Gigabit Ethernet PoE+ Switch
Quick Start Guide
Has (4) PoE+ 10/100/1000-Mbps twisted-pair and (2) SFP Gigabit ports.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
call 724-746-5500) • FREE technical support 24 hours a day, 7 days
a week: Call 724-746-5500 or fax 724-746-0746
www.blackbox.com • [email protected]
Industrial Managed GE PoE+ Switch Quick Start Guide
1. Specifications
For complete specifications, please see the user manual or the product data sheet
for this switch.
1. Go to www.blackbox.com
2. E nter the part number (LPH2004A-2GSFP) in the search box:
3. C
lick on the “Resources” tab on the product page, and select the document you
wish to download.
2. Features
•H
as (4) PoE+ 10-/100-/1000-Mbps copper access ports and (2) Gigabit SFP ports.
•O
perates in extreme temperatures of -40 to +158° F (-40 to +70° C).
2. What’s Included
Your package should contain the following items. If anything is missing or damaged,
contact Black Box Technical Support at 724-746-5500 or [email protected]
• Industrial Managed Gigabit Ethernet PoE+ Switch - 4-Port RJ-45, 2-Port SFP
• (2) dust covers (installed on SFP slots to protect the electronic circuitry)
• (5) dust covers (installed on RJ-45 slots to protect the electronic circuitry)
• Console cable
• DIN-rail mounting kit
• Wallmounting kit
• Console cable
• (6) M3 x 5 flat-head screws
• This printed quick start guide
Page 2
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide
3. Hardware Description
Figure 1-1 shows the Industrial Managed Gigabit Ethernet PoE+ Switch’s front
panel. Table 1-1 describes its components.
1
2
3
4
5
6
7
12
13
8
9
10
14
11
Figure 1. Front panel.
1.
2.
3.
4.
5.
6.
7.
Reset button
PWR status LED
PWR1 LED
PWR2 LED
Ring Master status LED
Ring status LED
Fault relay LED
8. Console port
9. Link/Act LED for Gigabit LAN ports
10. Speed LED for LAN ports
11. PoE indicators for LAN ports
12. Link/Act LED for SFP ports
13. SFP ports
14. Gigabit LAN ports
724-746-5500 | blackbox.com
Page 3
Industrial Managed GE PoE+ Switch Quick Start Guide
4. Hardware Installation
STEP 1: Installing the Switch on a DIN Rail or Wall
Refer to the illustrations below to mount the switch on a DIN rail or wall.
Figure 2. DIN rail installation.
Figure 3. Wallmount installation.
Page 4
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide
STEP 2: Network connection.
The switch provides standard Ethernet ports. According to the link type, the switch
uses CAT3, 4, 5, 5e UTP cables to connect to any other network devices (PCs,
servers, switches, routers, or hubs). Refer to the user manual for cable specifications.
STEP 3: Wiring
The switch supports dual redundant power supplies. The connections for PWR1,
PWR2, and RELAY are located on the terminal block.
Figure 4. Terminal block.
STEP 3A: Insert the negative/positive wires into the V+/V- terminals, respectively.
STEP 3B: To keep the DC wires from pulling loose, user a small flat-blade
screwdriver to lighten the wire-clamp screws on the front of the terminal block
connector.
Relay contact
The two sets of relay contacts on the 6-pin terminal block connector are used to
detect userconfigured events. The two wires attached to the fault contacts form an
open circuit when a user-configured event is triggered. If a user-configured event
does not occur, the fault circuit remains closed.
Grounding
Grounding and wire routing help limit the effects of noise due to electromagnetic
interference (EMI). Run the ground connection from the ground screws to the
grounding surface prior to connecting devices.
After installing the switch, the green Power LED should light.
724-746-5500 | blackbox.com
Page 5
Industrial Managed GE PoE+ Switch Quick Start Guide
Table 1. LPH2004A-2GSFP indicators.
Component
Description
(3) Power LEDs:
• PWR lights when PWR is on.
• PWR1 lights when DC power module 1 is activated.
• PWR2 lights when DC power module 2 is activated.
(1) Ring Master LED
• Lights when Ring is enabled.
• Blinking when ring structure is broken.
(1) Fault LED
Power failure or port disconnected.
(1) PoE LEDs
Lights when the port is using PoE+.
10/100/1000BASE-T(X) Gigabit PoE ports:
LINK/ACT LEDs
• ON when the port link is connected.
• Blinking when data is being transmitted.
Speed
• Lights green when port link speed is 1000 Mbps.
• Lights amber when port link speed is 100 Mbps.
• OFF when port link speed is 10 Mbps.
SFP ports:
LINK ACT LEDs
Page 6
• Lights when port link is connected.
• Blinking when data is being transmitted.
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide
5. Configuration
1. L aunch Internet Explorer and type in the IP address of the switch. The default
static IP address is 192.168.10.1.
2. L ogin in with the default user name and password (both are admin).
The following screen appears. For more information on configuring or operating
the switch, see the user manual.
Figure 5. Login screen.
Resetting
To reboot the switch, press the Reset button for 2–3 seconds.
To restore the switch configurations back to the factory defaults, press the Reset
button for 5 seconds.
724-746-5500 | blackbox.com
Page 7
Industrial Managed GE PoE+ Switch Quick Start Guide
PoE+ Pin Definition
Table 3-2. PoE pin definition.
Pin
10/100BASE-T(X) PSE RJ-45
port
Pin
1000BASE-T PSE RJ-45 port
1
TD+ with PoE power input +
1
BI_DA+ with PoE power input+
2
TD- with PoE power input +
2
BI_DA- with PoE power input+
3
RD+ with PoE power input -
3
BI_DB+ with PoE power input -
6
RD- with PoE power input -
4
BI_DC+
4
Not used
5
BI_DC-
5
Not used
6
BI_DB- with PoE power input -
7
Not used
7
BI_DD+
8
Not used
8
BI_DD-
Page 8
724-746-5500 | blackbox.com
NOTES
724-746-5500 | blackbox.com
Page 9
NOTES
Page 10
724-746-5500 | blackbox.com
NOTES
724-746-5500 | blackbox.com
Page 11
Chapter
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 60 seconds away
at 724-746-5500 or blackbox.com.
About Black Box
Black Box provides an extensive range of networking and infrastructure products.
You’ll find everything from cabinets and racks and power and surge protection
products to media converters and Ethernet switches all supported by free, live 24/7
Tech support available in 60 seconds or less.
© Copyright 2015. Black Box Corporation. All rights reserved. Black Box® and the Double Diamond
logo are registered trademarks of BB Technologies, Inc. Any third-party trademarks appearing in
this manual are acknowledged to be the property of their respective owners.
LPH2004A-2GSFP, version 1
Page 900
724-746-5500 | blackbox.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement