solar energy for hot water and heating sonnenKraft
Product and Price Catalogue 2013
®
SONNENKRAFT
Solar energy
for hot water
and heating
z
cover 100% of your
heating and hot
water demand with
a sol+ solution
once installed
heating FROM SUN
AND AIR is for free
High european
quality,
low maintenance
f
y
c
www.sonnenkraft.co.uk
d
k
solar energy
SOLUTIONS FOR HOT
WATER and HEATING
v
Every day the sun releases an enormous amount of energy - 100% clean and 100% free of charge.
For hot water and room heating, no­thing comes close to a solar thermal solution. In a solar thermal
solution the heat is used directly instead of being transferred to another energy type. This minimises
the energy losses and results in an increasedb efficiency in comparison to any other heating solution.
g
2
Environment
e
Economy
Independency
Solar energy generates no
pollution; it is efficient and
makes no noise. Solar energy
avoids the exploitation of nature
and helps saving our planet!
Once installed, the energy you
get from a solar solution is free.
The more the prices of oil and
gas will increase over time, the
bigger the savings.
An efficient solar energy solution
will give you the opportunity to
gain independency from the
traditional energy supplier, and
help keep energy costs at
a low level.
Solar energy solutions
Our values create value for you
The tools to sell solar solutions
New: The Sol+ solution
2
4
6
8
Intro
Introduction
Page
2-9
Set solutions
COMPACT E 14
COMPACT Plus 16
COMFORT E 20
COMFORT E Plus 22
Sol+ 26
Page
10-28
Large scale
COMFORT E PLus XL
COMFORT E XL
30
32
Page
29-33
Collectors
SKR500 35
SK500-ECO-AL 38
SK400-AL 40
IDMK-AL 42
GK-HP 44
a
Page
34-45
Tanks
ELB 47
DHW/ELB 48
PSR-E 49
PSC-E 50
PS-E 51
Tank and module overview 52
Page
46-53
Modules
High potential savings
with hot water and
room heating
RLGHE, PSKR18HE 55
FWM15i/30i 56
FWM30i cascade, FWM150/225 57
SLM50HE, SLM120/200 58
HKM20HE, RAS20 59
Additional pumping station 60
Page
54-60
Accessories
HOT WATER
ELECTRICITY
Control units 61
Heat exchangers 62
Solar circuit 63
Accessories components 64
Page
61-65
ROOM
HEATING
Solar Electricity
COMPACT POWER 68
Black Pearl 245 WP 70
In general 2/3 of a household’s energy costs come
from hot water and heating, and fortunately solar
thermal solutions are the most efficient solutions
for hot water and heating and offers high potential
savings.
Page
66-71
Service
Notes
Terms and conditions
Prices valid from January 1st 2012, all other pricelists lose validity from this date. Price
in GBP excluding VAT. Prices subject to change (prices without indication of quantity are
prices per piece). Subject to technical changes! Figures and illustrations used as examples. Formatting and printing errors might occur. Range of products is not binding.
2013 prices – all prices are indicated in GBP excluding VAT
72
74
Page
72-753
g
e
OUr values
create value
for you
z
At SONNENKRAFT we have spent the past two decades making nothing but
solar solutions. This focus has made us one of Europe's leading developers
of solar solutions, delivering installations to both the private and the
professional market. SONNENKRAFT is a part of SolarCAP, which has
ownership of solar companies all over the world.
4
f
Intro
Everything we do complies with our core
values: Easy, Efficient and Extra. We want to
make solar energy a natural part of every
building. Every time we see a roof top, we see
business opportunities. We want to explore
these opportunities with you.
FRONTRUNNER
By January 1. 2015 new
legislation require all pumps
to be high efficiency pumps.
All of SONNENKRAFT's pumps
already comply with this, so if
you want to reduce the energy
demand by up to 80%, why
wait until 2015.
Complete
y
By delivering all necessary
components of a solar energy
installation, SONNENKRAFT
ensures that every parts fits
together perfectly, which
increases the efficiency of our
solutions.
Efficient
The efficiency of an installation does
not only depend on one product’s
ability to perform. SONNENKRAFT
ensures that every component of an
installation is working together to
obtain optimum effect.
Streamlined
At SONNENKRAFT we have
streamlined our product
range to make it even easier
for our partners to analyse
their customer needs and to
order from us.
EASY
At SONNENKRAFT our main focus
is to be able to comply with the
demands of the market. A market
driven approach to our products is
important, and that's why we always
listen to the customer's demands.
Uncomplicated
The products from
SONNENKRAFT are easy to order,
install and maintain. That means
less hours working and more
money earned.
Extra
At SONNENKRAFT we always strive
to add something extra to create
more value for the customers.
g
State of the art
The strict and efficient control of
each and every component leaving
the European production plants
ensures that we always deliver high
quality.
2013 prices – all prices are indicated in GBP excluding VAT
m
Award winning
The product development
of SONNENKRAFT has been
acknowledged through receiving
two prestigious Plus X Awards.
The award distinguishes products that are innovative and
viable for the future and possess
at least one “Plus X” factor.
5
The tools to
sell solar
solutions
At SONNENKRAFT we want to be the best possible
business partner for you. The more we understand
the needs of your customers and the challenges in
the sales situation, the better we are able to help you.
Become a SONNENKRAFT
Partner
The best way to make business together is
to become partners. Our Partner Programme
offers many benefits for you, such as extensive
training support and close collaboration in
local campaigns and events. Contact your
SONNENKRAFT sales representative to learn
more about our partner conditions.
Together with SONNENKRAFT, you can very
easily offer the best tailor-made solution for every
individual need. This is the best guarantee we – and
you – can offer the consumer.
z
g
Solar academy
Become a
SoNNeNKRaFT®
paRTNeR
Training daTeS
module 1
module 2
module 3
module 4
d
YouR RewaRd iS waiTiNg FoR You
module 5
k
knowledge
increaSeS your
earningS
Fi
M
DU
LE
nc
4
e
Inst
a ll
at
MO
DU
How to give consumers
advice that sells (how to
uncover needs and suggest
the optimal solution to the
consumer, planning of the
project and dimensioning
of
y
the system)
module 2
What you should know
about SONNENKRAFT®
product solutions (technical data, how it works,
when to sell which solution)
n
SONNENKRAFT™
SOLAR CIRCLE
na
O
v
module 1
io
The more you know, the more you can sell.
e
d
z
Advice
ts
oduc
Pr
Please contact the SONNENKRAFT office for exact
timetables, etc. Because as we say:
Solar academy moduleS
MODULE 1
E2
DUL
MO
To effectively sell solar solutions and achieve happy
consumers, you and your team must have a deep
know-ledge of all aspects of a strong solar solution. With our Solar Academy, SONNENKRAFT® takes
responsibility for offering you training in each of
the five parts of the SONNENKRAFT Solar Circle.
Participation in the training will enable you to sell
more to the consumers.
g
3
b
MODU
LE
5
a
Servi
ce
v
LE
module 4
module 3
How to make the
perfect installation
(planning, security,
time estimate)
Subsidies and financing
are important parts of the
total solution. The possibilities vary from country
to country. Ask us which
advice, documentation
and certificates can be
provided in your country.
g
module 5
Service as a tool to get
satisfied consumers
and added sales (yearly
checks, warranty, how
to contact existing
consumers)
6
Benefit from the SonnenKrAft®
PArtner ProgrAm 2013
7
www.sonnenkraft.com
6
m
z
a
Intro
y
increase SALES WITH
OUR STRONG consumer
MARKETING PACKAGE
receive Consumer leads
direct in your mailbox
The consumer catalogue is your guide to use when
talking to the consumer. The icons and the colour
codes make it easy to find and present the relevant
solutions. This will ensure that the dialogue
pro­gresses quickly towards a sale without any
risk of confusion and misunderstanding. Together
with the consumer, you will find the best solution.
One of the most popular features on our website is
the solar calculator. The calculator recommends a
suitable solution and calculates its specific benefits. It
m
generates leads of potential consumers,
that want
to learn more about solar solutions and get an offer.
We can make sure, that you get information about
these valuable sales opportunities directly in your
mailbox. For partners we offer an advanced version of the solar calculator on the login area on
our website making it easy to do the calculation of
the installation and more importantly, showing the
end-users great improvement potential.
Product Catalogue 2013
SonnenKraft®
Solar energy
for hot water
and heating
cover 100% of your
heating and hot
water demand with
a Sol+ Solution
once inStalled
heating from Sun
and air iS for free
high european
quality,
low maintenance
www.sonnenkraft.com
2013 prices – all prices are indicated in GBP excluding VAT
7
z
f
NEW:
the Sol+ solution
with heat pump
y
c
p
Utilising the RENEWABLE
POWER OF NATURE
Sometimes you need just a little effort to accomplish great results. When our technicians
had the idea to combine a solar hot water and heating solution with a heat pump it already
seemed a really good idea. But as the development of the project progressed it became
clear to everyone that we were about to accomplish something quite unique.
8
Intro
Best in class
g
Reduced energy
demand
The brand new Heat Pump
HP12M offers the highest efficiency in its class, with a COP
of 4,02. This means that the
heat pump delivers more than
4 heating output units, for each
electricity input unit.
The full modul­ating pump
reduces energy demand by up
to 20%, because it adapts its
operating “speed”. This compared to stand-ard heat pumps
which run “full speed” and stop
when delivering more heat than
necessary.
Easy operation
Easy system control, due to a
touch screen with LAN interface
which allows remote control and
even automatic service monitoring if wanted.
m
u
The Sol+ solution
Not only are you now able to offer your customers the most efficient heating solution. Now they
can finally get all their heating without the need
of an oil burner, gas boiler or any other auxiliary
heating system. They will never have to worry
about price increases on fossil fuels again.
2013 prices – all prices are indicated in GBP excluding VAT
Solar hot water
and heating
Heat pump
The energy generated
from the collectors is used
first because it is the most
effective way of generating
hot water and room heating,
and it's for free!
When necessary the heat
pump delivers the rest
of the energy needed:
generating up to 4
heating outputs for each
electrical energy input.
9
10
Solutions
Page
Solar hot water 12-17
Solar hot water Page
Solar room heating 18-23
Solar hot water
Solar room heating Page
Solar heat pump 24-28
2013 prices – all prices are indicated in GBP excluding VAT
11
what it does
The Solar Hot Water solutions from SONNENKRAFT use the
energy of the sun to heat up water needed for domestic hot
water, for instance in the kitchen or bathroom.
How it works
The sun heats up the liquid in the solar panels on the roof. The
heat from the solar liquid is transferred to the water in the hot
water tank and thereby domestic hot water is produced.
THE Improvement
economic
SONNENKRAFT´s hot water solutions make a household much
more energy efficient, which will save money every day. The
solutions improve the energy rating of the home and the costs
can be offset by an increase in its value.
Environmental
Combustion of oil and gas fossil fuel is considered to be the
largest contributing factor to the release of greenhouse gases
into the atmosphere. That is why governments in almost every
country have set up aggressive goals to reduce carbon dioxide
emission. Using solar energy emits zero carbon dioxide.
Independency
Oil and gas are scarce resources that will run out of over time.
The future price is highly uncertain. During the last 10 years
the oil price has increased by 300 %. Using as much solar
energy as possible reduces the user's dependency on other
energy sources, and so removes the worry about increasing
fossil fuel prices and future scarce supply.
12
Solutions
solar hot water
Benefits
• Produce up to 70 % of your hot
water for free
• The HE pump of the COMPACT PLUS
system requires 80% less energy
than standard pumps
• Quick and easy installation
• Low maintenance
• Premium SONNENKRAFT Quality
• Two different solutions available
the solutions
Compact Plus
The SONNENKRAFT COMPACT PLUS is an easily installed
hot water tank and is provided with tested components
and proven technology to ensure durability and efficiency
THERMOSYPHON TS-E
Thermosyphon solutions are the most basic of all solar
hot water solutions, combining solar collector and
domestic hot water tank in one outdoor unit. So the Thermosyphon TS-E works based on natural convection, which
circulates liquid without the necessity of a mechanical
pump.
HIGH
EFFICIENCY
A
Thermosyphon TS-E
COMPACT PLUS
2013 prices – all prices are indicated in GBP excluding VAT
13
solar hot water
Compact PLUS
It doesn’t have to be expensive to become energy
efficient. SONNENKRAFT offers you the easiest
solution to utilise solar energy in residential housing.
COMPACT PLUS can cover up to 75% of a household's total hot water demand.
It is your guarantee for a solution in premium
European quality that ensures long lasting energy
supply and a positive environmental impact.
Functional diagram
COMPACT PLUS
Hot water
or
ct
le
l
Co
Backup
heater
Hot water
tank
Pumping
station
Cold water
14
HIGH EFFICIENCY PUMP
Easy installation
The pump station PSKRHE now comes with a high efficiency
pump, which requires 80% less energy to run a solar system
than standard pumps of this type.
Easy to set up and install due to “Plug & Flow” installation of
solar pumping station. Thanks to the slim design, the COMPACT
PLUS takes up very little space.
200 L
300 L
400 L
750 L
750 L
1000 L
Persons (Middle/North Europe)
Pers.
1-3
2-4
3-6
5-8
8 - 12
12 - 20
Persons (Southern Europe/Middle East/Africa)
Pers.
1-4
2-5
3-8
5-9
8 - 15
12 - 20
Number of collectors
Pcs
1
2
3
4
5
6
Collector surface area (SKR, SK-ECO-AL, IDMK-AL / SK400-AL)
m
2.5 / 2
5.1 / 4
7.5 / 6
10.1 / 8
12.5 / 10
15.1 / 12
SKR500 sets WITHOUT mounting/flashing
£
3,195.-
4,195.-
5,095.-
6.845.-
7,535.-
8,560.-
SKR500
Item no.
152 425
152 432
152 439
153 664
153 671
153 678
SKR500L
Item no.
152 426
152 433
152 440
153 665
153 672
153 679
SK400-AL sets WITHOUT mounting/flashing
SK400N-AL
SK500-ECO-AL sets WITHOUT mounting/flashing
2
£
3,125.-
3,995.-
4,895.-
6.435.-
7,020.-
7,945.-
Item no.
152 430
152 437
152 444
153 669
153 676
153 683
£
3,195.-
4,195.-
5,095.-
6.890.-
7,590.-
8,630.-
SK500N-ECO-AL
Item no.
152 427
152 434
152 441
153 666
153 673
153 680
SK500L-ECO-AL
Item no.
152 428
152 435
152 442
153 667
153 674
153 681
£
3,650.-
4,750.-
5,550.-
7.105.-
7,865.-
8,955.-
Item no.
152 429
152 436
152 443
153 668
153 675
153 682
£
3,195.-
4,195.-
5,095.-
6.705.-
7,360.-
8,350.-
Item no.
152 431
152 438
152 445
153 670
153 677
153 684
£
450.-
450.-
450.-
550.-
550.-
550.-
For SKR500
Item no.
141 590
141 590
141 590
141 591
141 591
141 591
For SK400N-AL
Item no.
141 524
141 524
141 524
141 526
141 526
141 526
For SK500-ECO-AL
Item no.
141 524
141 524
141 524
141 526
141 526
141 526
For IDMK-AL
Item no.
141 523
141 523
141 523
141 525
141 525
141 525
Type
ELB200
R2E-H-UK
ELB300
R2E-H-UK
ELB400
R2E-H-UK
DHW750R2
DHW750R2
DHW1000R2
SPECIAL COLLECTOR FOR COASTAL REGIONS
and CORROSIVE ENVIRONMENT
SK500N-ECO-AL-M
IDMK-AL sets WITHOUT mounting/flashing
IDMK25-AL
Solutions
Compact PLUS solutions
See page 36-37, 39, 41 and 43 for mounting systems
Corrugated pipe connection set
(DN16-20*, 15 m, incl. connections from EWSID
to pump unit and to collector)
*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20
Set components
COMPACT E tank
Solar unvented tank kit, incl. hot water expan. tank
Type
SDHWK200
SDHWK300
SDHWK400
–
–
–
Pumping station and flow fitting with gravity brake
Type
PSKRHE
PSKRHE
PSKRHE
RLGHE *
RLGHE *
RLGHE *
2-circuit control unit, incl. 2 sensors
Type
SKSC2
SKSC2HE
SKSC2HE
SKSC2HE
SKSC2HE
SKSC2HE
Domestic water mixer
Type
TBM20
TBM20
TBM20
TBM25
TBM25
TBM25
Expansion tank
incl. tank mounting or connection**
Type
AG18S
AG25S
AG25S
AG33S
AG33S
AG50S**
Antifreeze
l
15
15
20
20
20
25
SONNENKRAFT SERVICE
Sonnenkraft offer full design and service support. For specification and installation
details refer to our website / or contact us for a bespoke customer experience
*) RLGHE not pre-mounted, **) AGS floor mounting
control unit
reliable technology
A pre-configured and very user friendly control unit makes the
COMPACT PLUS very easy to operate. It also requires minimal
maintenance.
All components are of premium European quality, thoroughly
tested and perfectly matched. We use only proven technology
to ensure durability and efficiency
2013 prices – all prices are indicated in GBP excluding VAT
15
Solar hot water
Thermosyphon TS-E
The improved SONNENKRAFT Thermosyphon system works
using the force of gravity. The inexpensive system, consisting of
a collector, double enamelled domestic hot water tank incl. magnesium anode and mounting system, is assembled on-site.
It is an ideal solution for creating hot water in smaller households and warm climates.
Functional diagram
THERMOSYPHON
Hot water
Hot water tank
or
ct
Cold water
le
l
Co
16
COST EFFECTIVE AND EFFICIENT
EASY TO INSTALL
The Thermosyphon TS-E is a very easy and efficient solution to
provide domestic hot water for various applications. In warm
climates no electrical power supply is needed to run the systems.
The compact Thermosyphon TS-E system is very easy to connect
to the cold and hot water mains.
Number of collectors
Pcs
Collector surface area
TS150E
TS200E
TS300E
1
1
2
m
2.1
2.1
4.2
Tank
l
150
200
300
System WITH mounting
(parallel on pitched roof or 40° on flat roof)
£
on request
on request
on request
Item no.
152 675
152 676
152 677
1x TSC221-HS
1x TSC221-HS
1x TSC221-HS
1x TSC221-HSB
2045x1030x105
2045x1030x105
2x (2045x1030x105)
2
TS-E
Solutions
TS-E solutions
Note: for parallel installation on pitched roof the min. roof tilt = 25°, the max. roof tilt = 45°
Set Components
Collector high selective
Gross Dimensions (WxHxD)
mm
Absorber area
m
1,93
1,93
2x1,93
Empty weight
kg
42,5
42,5
42,5+40,5
l
2,5
2,5
2,5+2
2
Capacity
Absorber
Harp with absorber fins
Tank
Capacity water / solar
TST150
TST200
TST300
l
150 / 5.5
200 / 8.5
300 / 13.5
Weight empty
kg
62,5
78
113
Max. water operating pressure
bar
6
6
6
Max. solar operating pressure
bar
3
3
3
Insulation thickness
mm
50
50
50
Coating hot water tank
enameled
Mounting set (0-40º)
kg
Weight
MS-TS150/200
MS-TS150/200
MS-TS300
38,7
38,7
47
Corrosion protection
Powder coating
ACCESSORIES
Solar safety valve
bar
DHW tank safety group
bar
3
3
3
6
6
6
4
4
4
l
5
5
10
Electrical heating 2kW EHP20-TS (152 670)
£
on request
on request
on request
Mg-Anode Ø22 x 500 mm MGA-TS (152 671)
£
on request
on request
on request
Over temperature safety valve 85 °C TSV-TS (152 672)
£
on request
on request
on request
Pipes (connection tank-collector)
Antifreeze
OPTIONAL ACCESSORIES
Sonnenkraft offer full design and service support. For specification and installation
details refer to our website / or contact us for a bespoke customer experience
SONNENKRAFT SERVICE
reliable technology
large scale installations
Simple system using the force of natural gravity - no pump unit
required.
The Thermosyphon TS-E system is also suitable for parallel
mounting. This enables hot water production even for large
scale projects.
1860 mm
m
2100 mm
620 mm
620 mm
1030 mm
2013 prices – all prices are indicated in GBP excluding VAT
TS300E
2700 mm
m
2045 mm
20
45
TS150E, 0°
TS200E, 0°
2700 mm
1565 mm
620 mm
1000 mm
TS150E, 45°
TS200E, 45°
TS300E, 45°
TS300E
1030 mm
2100 mm
17
what it does
The Solar Hot Water and Room Heating solutions from
SONNENKRAFT use the energy of the sun to deliver a large
part of the energy needed, for free. These solutions can
additionally support pool heating.
How it works
The sun heats up the liquid in the solar panels on the roof.
The heat from the solar liquid is transferred to the water in the
backup tank. Then it can be circulated in the room heating
system. When hot water is needed in the kitchen or bathroom,
the fresh water module heats up the fresh cold water. The solution can also support the heating of swimming pools.
THE Improvement
economic
The COMFORT E and COMFORT E Plus solutions make the
house much more energy efficient, which will save money
every day. The solutions improve the energy rating of the
home and the costs can be offset by an increase in its value.
Environmental
Combustion of oil and gas fossil fuels is considered to be
the largest contributing factor to the release of greenhouse
gases into the atmosphere. That is why governments in
almost every country have set up aggressive goals to reduce
carbon dioxide emission. And by applying solar energy also
to heating of rooms and swimming pools, the emmisions of
the house are reduced even further. Using solar energy emits
zero carbon dioxide.
Independency
Oil and gas are scarce resources that will run out of over time.
The future price is highly uncertain. During the last 10 years
the oil price has increased by 300 %. Using as much solar
energy as possible reduces the user's dependency on other
energy sources, and so removes the worry about increasing
fossil fuel prices and future scarce supply.
SKSC2HE
18
Solutions
solar hot water
Solar room heating
Benefits
• Produce up to 50% of the heating and
80% of the hot water demand for free, in
well-insulated houses
• Using solar energy for both hot water and
heating creates a very efficient energy
solution
• All our hydraulic modules use High Efficiency pumps reducing energy demand by
up to 80%
• Fresh, hygienic hot water production without any risk of legionella by means of hot
water generation on demand
• Premium European Quality
• Quick and easy installation
the solutions
Comfort e
This solution consists of the tank PSR-E, a highly
efficient pump station and an intelligent fresh water
module. It can deliver up to 30 % of total heating and
80 % of the hot water demand.
Comfort E plus
This solution can deliver up to 50 % of a household´s
heating demand and 80 % of the hot water demand. It
consists of the PSC-E tank with an intelligent fresh water
module, a highly efficient stratification module and a heating circuit module. All developed to fit perfectly together.
HIGH
EFFICIENCY
Now all solutions
with high efficieny
pumps!
PLUS X Award
achieved for Solutions
COMFORT E Plus and
module FWMi
COMFORT E Plus
A
COMFORT E
2013 prices – all prices are indicated in GBP excluding VAT
19
PLUS X Award
achieved for
module FWMi
solar hot water
Solar room heating
Comfort E
The COMFORT E solution by SONNENKRAFT is the
cost-effective solution for everyone who needs both hot
water and room heating. This solution consists of the
PSR-E tank with a high efficient pump station and intelligent fresh water module. It can cover up to 30 % of a
household's heating demand and 80 % of the hot water
demand.
This solutions can additionally be used for heating of pools
- indoor or outdoor.
or
ct
le
l
Co
Hot water
Functional diagram
COMfort E
Backup
boiler
Cold water
Heating
flow
Heating
return
Pumping
station
20
Backup tank
Fresh water
module
Fresh Water Module
PSKR18HE
Fresh, hygienic hot water by means of hot water preparation on
demand. An intelligent unit that delivers exactly the quantity
of hot fresh water exactly when needed. No hot water storage
required, which prevents any risk of development of legionella.
The high efficient PSKR18HE comes with a controller with an
easy operating panel. The module with its high efficiency pump
saves money at every operating condition and increases the
operating range regarding flow by 30 %.
HIGH
EFFICIENCY
HIGH
EFFICIENCY
A
A
500 L
500 L
800 L*
1000 L*
Persons (Middle/North Europe)
Pers.
1-3
2-4
2-5
4-6
Persons (Southern Europe/Middle East/Africa)
Pers.
1-5
2-6
2-6
4-6
Number of collectors
Pcs
3
4
5
6
Collector surface area
m
7.5
10.1
12,5
15.5
SKR500 sets WITHOUT mounting/flashing
£
5,685.-
6,295.-
7,125.-
7,995.-
2
SKR500
Item no.
153 215
153 222
153 229
153 236
SKR500L
Item no.
153 216
153 223
153 230
153 237
£
5,685.-
6,295.-
7,125.-
7,995.-
SK500N-ECO-AL
SK500-ECO-AL sets WITHOUT mounting/flashing
Item no.
153 219
153 226
153 233
153 240
SK500L-ECO-AL
Item no.
153 220
153 227
153 234
153 241
£
5,995.-
6,750.-
7,750.-
8,495.-
Item no.
153 243
153 244
153 245
153 246
SPECIAL COLLECTOR FOR COASTAL REGIONS
and CORROSIVE ENVIRONMENT
SK500N-ECO-AL-M
IDMK-AL sets WITHOUT mounting/flashing
IDMK25-AL
£
5,685.-
6,295.-
7,125.-
7,995.-
Item no.
153 221
153 228
153 235
153 242
£
450.-
550.-
550.-
550.-
Solutions
COMFORT E solutions
See page 36-37, 39, 41 and 43 for mounting systems
Corrugated pipe connection set
(DN16-20*, 15 m, incl. connections from EWSID
to pump unit and to collector)
For SKR500
Item no.
141 590
141 591
141 591
141 591
For SK500-ECO-AL
Item no.
141 524
141 526
141 526
141 526
For IDMK-AL
Item no.
141 523
141 525
141 525
141 525
*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20
Set components
COMFORT E tank
Type
PSR500E
PSR500E
PSR800E
PSR1000E
Solar pumping station incl. cap valve KVAG20
Type
PSKR18HE
PSKR18HE
PSKR18HE
PSKR18HE
FWM fresh water module
Type
FWM15i-CU
FWM15i-CU
FWM15i-CU*
FWM15i-CU*
2-circuit control unit, incl. 4 sensors
Type
SKSC2HE
SKSC2HE
SKSC2HE
SKSC2HE
Expansion tank
Type
AG25S
AG33S
AG33S
AG50S
l
20
20
20
25
Antifreeze
Sonnenkraft offer full design and service support. For specification
and installation details refer to our website / or contact us for a bespoke
customer experience
SONNENKRAFT SERVICE
COMFORT E SOLUTION SETS WITH FWM30i-CU
(*only for 800l and 1000l sets) Set item no. + addition "-30CU"
+£
–
–
110.-
110.-
Optional products (via set change)
Reduced price PSKR18HE-O
180.-
Surcharge FWM15i-VA
715.-
Surcharge FWM30i- VA
1,110.-
Note: more info about modules from page 54
Improvement of stratification
Height adjustable feet
The solar register is encapsulated; resulting in faster loading of
the upper part of the tank and a higher temperature difference
in the tank and a better performance for heating support during
the colder months of the year. The insulation fits perfectly and
reduces the heat loss.
This enables a perfect placement of the tank, even if it is
installed on uneven surfaces. The bottom border covers the
feet to create a nice look.
2013 prices – all prices are indicated in GBP excluding VAT
21
PLUS X Award
achieved for Solutions
COMFORT E Plus and
module FWMi
solar hot water
Solar room heating
Comfort E plus
The COMFORT E Plus solution is the sophisticated solar thermal solution
for hot water and room heating with the highest energy output.
This solution can cover up to 50 % of your heating and 80 % of the
hot water demand. It consists of our highly efficient PSC-E tank with
an intelligent fresh water module, a highly efficient stratification
module, and an optional high efficient heating circuit module. All
developed to fit perfectly together.
The high efficient heating circuit module HKM20HE can also
be mounted on the COMFORT E Plus solution, to directly
operate the radiator or floor heating system time and
weather controlled. The RAS20 ensures the most efficient application of solar thermal energy in
combination with the existing heating system,
especially with condensing boilers.
COMFORT E PLUS can also be used for pool
heating.
or
ct
Boiler
flow
le
l
Co
Hot water
Functional diagram
COMfort E plus
Boiler
return
Heating
flow
Stratified charging module
Cold water
Heating
return
Fresh water
module
Backup tank
Fresh Water Module
20 % reduction of heat loss
Fresh, hygienic hot water by means of hot water preparation on
demand. An intelligent unit that delivers exactly the quantity
of hot fresh water exactly when needed. No hot water storage
required, which prevents any risk of development of legionella.
The fleece insulation fits perfectly to the PSC-E tank and is easy
to remove and put on again. Together with the new patented
insulation caps it reduces the heat loss significantly and keeps
the valuable solar yield to heat the household.
HIGH
EFFICIENCY
A
22
800 L
1000 L
1600 L
2000 L
Persons (Middle/North Europe)
Pers.
3-6
4-8
4-8
4 - 10
Persons (Southern Europe/Middle East/Africa)
Pers.
3-6
4-8
4-8
4 - 10
Number of collectors
Pcs
5
6
8
10
Collector surface area
m
12.5
15.1
20.1
25.5
£
9,195.-
9,995.-
12,675.-
14,095.-
2
SKR500 sets WITHOUT mounting/flashing
SKR500
Item no.
153 301
153 308
153 315
153 322
SKR500L
Item no.
153 302
153 309
153 316
153 323
£
9,195.-
9,995.-
12,675.-
14,095.-
SK500N-ECO-AL
SK500-ECO-AL sets WITHOUT mounting/flashing
Item no.
153 305
153 312
153 319
153 326
SK500L-ECO-AL
Item no.
153 306
153 313
153 320
153 327
£
9,500.-
10,450.-
13,250.-
14,650.-
Item no.
153 364
153 365
153 366
153 367
SPECIAL COLLECTOR FOR COASTAL REGIONS
and CORROSIVE ENVIRONMENT
SK500N-ECO-AL-M
IDMK-AL sets WITHOUT mounting/flashing
IDMK25-AL
£
9,195.-
9,735.-
12,350.-
13,710.-
Item no.
153 307
153 314
153 321
153 328
£
550.-
550.-
550.-
550.-
Solutions
comfort E plus solutions
See page 36-37, 39, 41 and 43 for mounting systems
Corrugated pipe connection set
(DN16-20*, 15 m, incl. connections from EWSID
to pump unit and to collector)
For SKR500
Item no.
141 591
141 591
141 591
141 591
For SK500-ECO-AL
Item no.
141 526
141 526
141 526
141 526
For IDMK-AL
Item no.
141 525
141 525
141 525
141 525
Type
PSC800E
PSC1000E
PSC800E
+PS800E
PSC1000E
+PS1000E
FWM fresh water module
Type
FWM15i-CU
FWM15i-CU
FWM15i-CU
FWM15i-CU
Stratification module
Type
SLM50HE
SLM50HE
SLM50HE
SLM50HE
3-circuit control unit, incl. 5 sensors and 2 GF sensors
Type
SKSC3+
SKSC3+
SKSC3+
SKSC3+
Expansion tank and cap valve KVAG
Type
AG33S
AG50S
AG80S
AG100S
l
20
25
30
30
*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20
Set components
COMFORT E Plus tank
Antifreeze
SONNENKRAFT SERVICE
Sonnenkraft offer full design and service support. For specification and installation details refer to our
website / or contact us for a bespoke customer experience
COMFORT E Plus SOLUTION SETS WITH FWM30i-CU
Set item no. + addition "-30CU"
+£
110.-
110.-
110.-
110.-
Optional products (via set change)
Reduced price SLM50HE-O
420.-
Surcharge FWM15i-VA
715.-
Surcharge FWM30i- VA
1,110.-
ADDITIONAL PRODUCTS - HKM20HE (131 221) - 1,135.-, RAS20 (131 325) - 835.Note: more info about modules from page 54
Intelligent solar heating
Stratification module
The RAS20 increases the temperature of the heating return
line only as much as necessary. It’s intelligent controller takes
only as much solar energy as necessary to reach the desired
flow temperature. Combined with the perfect stratifying PSC-E
tank the efficiency of the total heating system will increase
significantly.
The SLM50HE guarantees optimal stratification in the
storage tank. The high efficiency pumps ensure optimum
perfomance at each operating mode and reduces electricity
consumption by 80%.
HIGH
EFFICIENCY
A
2013 prices – all prices are indicated in GBP excluding VAT
23
what it does
The SOL+ solution combines solar energy with the HP12M
air-water heat pump, upgrading any solar heating solution to a
complete and almost fully renewable heating system. 100% of
the whole energy demand for hot water and heating is covered
by this solution!
How it works
The air-water heat pump HP12M in combination with solar
heating system COMFORT E or COMFORT E plus results in a
complete heating system without need for any other auxiliary heating.
Solar panels are heating up a buffer tank where the upper
part is used as hot water storage. A fresh water module
uses this water to generate hot water for domestic use. The
remaining energy in the buffer tank is being used for heating
the building.
The heat pump is only used when there is not enough solar
energy in the tank to fulfill the heat demand of the building. It also only operates when there is an instant need for
energy and using cutting edge modulating compressor technology, ensures it is highly efficient.
Free solar energy is used when there is a need for frost protection ensuring a coordinated and highly efficient design.
THE Improvement
Economic
In combination with a COMFORT E, COMFORT E Plus or an
already installed solar heating solution the air-water heat pump
makes the house much more energy efficient, which will save
money every day. This particular solution provides you with hot
water and room heating all year without need for any backup
system. The solutions improve the energy grade of the house
considerably, so that the investment will be offset by a higher
value of the house.
Environmental
Combustion of oil and gas fossil fuels is considered to be the
largest contributing factor to the release of greenhouse gases
into the atmosphere. That is why governments in almost every
country have set up aggressive goals to reduce carbon dioxide
emission. Using solar energy emits zero carbon dioxide, and
combining a solar thermal solution with a heat pump contributes
even more to reduce CO2 emmisions.
Independency
Oil and gas are scarce resources that will run out of over time.
The future price is highly uncertain. During the last 10 years the
oil price has increased by 300 %. When combining solar thermal
energy with a heat pump, the household becomes nearly totally
energy self-sufficient, which minimizes the user's dependency
on other energy sources, and so removes the worry about
increasing fossil fuel prices and future scarce supply.
24
Solutions
solar hot water
Solar room heating
Solar heat pump
Benefits
• Via intelligent combination of solar and heat pump,
this solution covers the whole energy demand for
hot water and heating! Therefore, more than 90%
of the hot water and more than 75 % of the heating
demand is covered by energy from sun and air for
free
• Complete Heating System made in Europe at the
cutting edge with a superior quality level, highest
efficiency and outstanding operation comfort
• Fresh, hygienic hot water supply in continuous flow
mode
• Low installation time with “Plug & Flow"
• One controller with touch display and WEB-applications to control the complete heating solution
the solution
SOL+
This solution includes all necessary components
to deliver hot water and room heating all year
without the need for any backup systems. Combining the heat pump with a solar thermal solution
from SONNENKRAFT, almost the complete energy
demand of a modern home can be covered with
renewable energy.
HIGH
EFFICIENCY
Now all solutions
with high efficieny
pumps!
PLUS X Award
achieved for
module FWMi
A
2013 prices – all prices are indicated in GBP excluding VAT
SOL+
25
solar hot water
Solar room heating
Solar Heat Pump
SOL+
The SOL+ solution is SONNENKRAFT’s brand new
solution which makes the household near to energy
self-sufficient. The solution combines solar thermal
energy with an air-water heat pump, and eliminates the
need for any additional backup heating.
The HP12M heat pump in the SOL+ solution offers an
outstanding efficiency because of generously designed
components and the use of modulating compressor and
fan unit. It is combined with either a COMFORT E or a
COMFORT E Plus Solar system.
A controller with full graphic touch display makes sure
that the system covers the energy demand of the home
with a maximum amount of renewable energy, so that
this solution covers more than 90% of the hot water
and more than 75% of the heating demand by free
energy from the sun and the air.
Functional diagram SOL+
Hot water
or
ct
Pumping
station Heatpump
(CPHP)
Pumping
station
Storage tank
(PSR-E)
26
Cold water
le
l
Co
Fresh water
module
EUROPEAN QUALITY & MORE
ALL IN ONE CONTROLLER
Besides an outstanding high efficiency the European Quality
ensures easy installation, long lifetime and maintenance reduced
to a minimum. A great design tops all this off.
The preset all in one controller with easiest and intuitive menu
navigation via full graphic touch display monitors and controls the
complete system in an optimum way all year round. Integrated
energy balancing for the solar system and the heat pump, and the
possible integration into a home network remote control, make
the system much more convenient to use!
500 L
1000 L*
1000 L*
Pers.
2-4
4-6
4-8
Heat pump HP12M
kW
4 - 12
4 - 12
4 - 12
Number of collectors
Pcs
3
6
6
Collector surface area
m
7.5
15.1
15.1
£
22,950.-
26,995.-
28,750.-
Persons
2
SKR500 sets WITHOUT mounting/flashing
SKR500
Item no.
152 031
152 037
152 043
SKR500L
Item no.
152 032
152 038
152 044
£
22,950.-
26,995.-
28,750.-
SK500-ECO-AL sets WITHOUT mounting/flashing
SK500N-ECO-AL
Item no.
152 033
152 039
152 045
SK500L-ECO-AL
Item no.
152 034
152 040
152 046
£
23,995.-
27,250.-
28,895.-
Item no.
152 035
152 041
152 047
£
22,950.-
26,995.-
28,750.-
Item no.
152 036
152 042
152 048
£
450.-
550.-
550.-
For SKR500
Item no.
141 590
141 591
141 591
For SK500-ECO-AL
Item no.
141 524
141 526
141 526
For IDMK-AL
Item no.
141 523
141 525
141 525
Tank
Type
PSR500E
PSR1000E
PSC1000E
Solar pumping station
Type
PSKR18HE-O
PSKR18HE-O
SLM50HE-O
FWM Fresh water module
Type
FWM15i-CU
FWM15i-CU*
FWM15i-CU*
SPECIAL COLLECTOR FOR COASTAL REGIONS
and CORROSIVE ENVIRONMENT
SK500N-ECO-AL-M
IDMK-AL sets WITHOUT mounting/flashing
IDMK25-AL
Solutions
SOL+ solutions
See page 36-37, 39, 41 and 43 for mounting systems
Corrugated pipe connection set
(DN16-20*, 15 m, incl. connections from EWSID to pump unit and to collector)
*) Collector area < 10 m2 = DN16, collector area ≥ 10 m2 = DN20
Set components
Heating module incl. wall mounting kit
Type
–
HKM20HE-O
HKM20HE-O
Type / l
AG25S / 20
AG50S / 25
AG50S / 25
System controller incl. sensors (SKSAFR and RSHP)
Type
SKSCHP
SKSCHP
SKSCHP
System circulation pump
Type
CPHP
CPHP
CPHP
Diverter valve (incl. el. actuator)
Type
1 x DWVHP
2 x DWVHP
2 x DWVHP
Expansion tank / Antifreeze
SONNENKRAFT SERVICE
Sonnenkraft offer full design and service support. For specification and installation details refer to our website / or contact us for a bespoke customer experience
SOL+ SOLUTION SETS WITH FWM30i-CU
(* only for 1000lt sets) Set item no. + addition "-30CU"
+£
–
255.-
145.-
Optional products (via set change)
Surcharge Hydrobox HBHP instead of single components CPHP and
DWVHP for easy installing (only for 1000l sets)
510.-
Surcharge FWM15i-VA
715.-
Surcharge FWM30i- VA
1,110.-
ADDITIONAL PRODUCTS - EHP25SET Electr. Heating Element 2,5 kW (120 169) - 645.-, EHP45SET Electr. Heating Element 4,5 kW (120 170) - 695.Note: more info about modules from page 54; *) ONLY for 1000L-Sets. Direct room heating via PSR500E is not recommended!
Attention: please note that there are different system diagrams for different set sizes (see diagramm manual or manual HP12M).
All energy all year
MOST EFFICIENT ON THE MARKET
The combination of COMFORT E or COMFORT E Plus with the
heat pump HP12M ensures that all the hot water and room
heating which is needed can be delivered this solution – also in
winter, when the sun delivers less irradiation.
A very high efficient modulating compressor and fan unit
ensures an outstanding COP all year round – in times with
high and low energy demand. Even down to -15ºC this heat
pump is able to deliver 10 kW heat capacity. The market has
never seen a more efficient air-water monoblock heat pump.
2013 prices – all prices are indicated in GBP excluding VAT
27
SOL+ Heat pump
hp12M
The brand new and exclusive SOL+ heat pump HP12M combines the latest heat pump technology
with SONNENKRAFTs outstanding solar know-how. Via the easy and intuitive system controller
SKSCHP the heat pump could be combined very easily with all heating and PV solutions of
SONNENKRAFT.
ALL IN ONE
CONTROLLER
HIgh
efficiency
ALL ENERGY
ALL YEAR
The system controller SKSCHP
with touch display enables
the perfect interaction of heat
pump and all other components
of the solar system. The menu
navigation is easy and intuitive.
A very high efficient Solar Heat
Pump with and outstanding COP
ensures - together with the high
efficient solar system solutions of
SONNENKRAFT - minimum energy
costs.
In combination with a
SONNENKRAFT system
solution for heating the HP12M
is a complete renewable energy
solution providing all hot water
and heating demand all over
the year.
Specifications
HEAT PUMP SOLAR
Technical Data
Heating capacity variable
kW
4,5 – 12,0
*Nominal heating capacity
kW / COP
8,0 / 4,71
**Nominal heating capacity
kW / COP
6,9 / 4,02
*at A7/W35 according to EN14511 (50% of maximal load)
**at A2/W35 according to EN14511 (50% of maximal load)
Height
mm
1643
Widht
mm
951
Depth
mm
965
Weight
kg
190
Volt / Hz
400 / 50
Fuse protection Heat Pump
A
C16 & C10
Device connections for heating
system
"
RN 5/4
Sound pressure level in 5 m
distance
dB(A)
41
Max. hot water temperature
°C
60
Min. ambient air temperature
Refrigerant / filling weight
Air-water heatpump, for heating applic.,
4.5 - 12 kW, 400V, for exterior installation
- stepless variable BLDC compressor
and EC axial fan
- Smooth start via inverter technology
-Vibration decoupled connections
- ModBUS interface
mandatory order of SKSCHP, 141183
13,750.-
SKSCHP
System controller for SOL+ solutions with
weather-controlled, multi-lingual system
controller with full grafic touch display
- Intuitive menu navigation
- Commissioning wizard
- Automatic season identification
- Cement flooring bake out function
- Holiday function
- Energy balancing
- LAN connection to home network
Control of up to 2 heating ciruits with
3-way-mixing valves, 1 direct heating circuit,
1 solar station (PSKRHE-O or SLM50HE-O),
1 east-west collector charging or swimming
pool heating, electrical auxiliary heating
system and command of external auxiliary
heating (bivalent boiler). All pumps must
be high efficient pumps with PWM-signal.
WxDxH: 500x180x400mm
2,250.-
141 183
Dimensions
Main supply
HP12M
132 104
°C
–20
- / kg
R410A / 5.8
via inverter
technology
Smooth start
Fits with following System solutions
ACCESSORIES
SKSAFR
Outdoor temperature sensor PT1000
50.-
RSHP
Room temperature sensor PT1000
45.-
EHP25-SET
Auxiliary Electrical Heating Set 2,5kW
for tube integration, consisting of
electrical heating element 2,5kW, 6/4"
male thread, built-in tube for e-heater,
electric contactor and terminals. Works
as instantaneous hot water heater and
provides temporary auxiliary heating of
the water for the heating circuit of the
heat pump
645.-
EHP45-SET
Auxiliary Electrical Heating Set 4,5kW for
tube integration, like EHP25 Set, 120 169
but with 4,5kW electrical heating element
695.-
CPHP
HE Circulation pump UWP GEO for HP12M,
230V, max. delivery height 8,5m, pipe
connections 6/4", built-in length 130mm,
control signal PWM
295.-
DWVHP
3-way diverter valve for operation modes
heating/hot water, DN32 (Rp5/4"), incl.
actuator
245.-
HBHP
Hydrobox for HP12M, consisting of
circulation pump and 3-way diverter
valve for operation modes heating/hot
water, filter, 2 check valves, connection
to possible external auxiliary heater and
insulating shell
1,295.-
141 127
132 046
120 169
120 170
132 043
COMFORT E
COMFORT E Plus
COMPACT POWER
Note: see page xx for expansion tanks.
Fits with following
modules
Note: in combination with HP12M wall
mounting of HKM20HE-O is mandatory
(HKM20/RAS-WMS)
28
HIGH
EFFICIENCY
A
HKM20HE-O
See page 59
132 044
132 045
large
2013 prices – all prices are indicated in GBP excluding VAT
Solutions XL
installations
29
SOLAR HEATING
FOR HIGH HOT WATER DEMAND
Comfort E plus XL
The COMFORT E Plus XL solution from SONNENKRAFT
is the optimum solution for apartment buildings,
hotels, camping sites, sports facilities and other large
installations with high hot water demand.
FUNCTIONAL DIAGRAM
COMFORT E PLUS
Boiler flow
Heating flow
Boiler
return
Heating
return
Stratified charging
module
HIGH
EFFICIENCY
Now all solutions
with high efficieny
pumps!
2 x Fresh water module
Cold water
Hot water
Co
l
le
ct
or
(HIGH HOT WATER DEMAND)
PLUS X Award
achieved for
module FWMi
A
Beneficial investment
HYGIENIc Hot water
High energy savings for heating and hot water reduces
utility costs and is therefore highly appreciated by tenants.
Furthermore the sustainable, environmental friendly
investment increases the value of the building.
The new Fresh Water Module Cascade FWMi provides hygienic
hot water only if needed via instantaneous hot water
production - even at high hot water demands up to 120 l/min.
30
comfort E plus XL SOLUTIONS
1500 L
1600 L
2000 L
3000 L
Pcs
6
8
8
10
15
3000 L
20
Collector surface area
m2
15,1
20,1,
20.1
25.5
37,5
50
SKR500 sets WITHOUT mounting/flashing
£
9,615.-
11,560.-
13,005.-
14,610.-
20,280.-
23,805.-
SKR500
Item no.
153 801
153 807
153 813
153 819
153 825
153 831
SKR500L
Item no.
153 802
153 808
153 814
153 820
153 826
153 832
SK500-ECO-AL sets WITHOUT mounting/flashing
£
9,605.-
11,540.-
12,985.-
14,590.-
20,165.-
23,760.-
SK500N-ECO-AL
Item no.
153 803
153 809
153 815
153 821
153 827
153 833
SK500L-ECO-AL
Item no.
153 804
153 810
153 816
153 822
153 828
153 834
£
9,930.-
11,975.-
13,425.-
15,135.-
21,065.-
24,850.-
Item no.
153 805
153 811
153 817
153 823
153 829
153 835
£
9,325.-
11,175.-
12,620.-
14,130.-
19,560.-
22,840.-
Item no.
153 806
153 812
153 818
153 824
153 830
153 836
£
550.-
550.-
550.-
–
–
–
For SKR500
Item no.
141 591
141 591
141 591
-
-
-
For SK500-ECO-AL
Item no.
141 526
141 526
141 526
-
-
-
For IDMK-AL
Item no.
141 525
141 525
141 525
-
-
-
Type
PSC1000E
PS1500E
2x
PSC800E
2x
PSC1000E
Stratified charging module
Type
SLM50HE
SLM50HE
SLM50HE
SLM50HE
SLM50HE
SLM50HE
Cap valve
Type
KVAG20
KVAG25
KVAG25
KVAG25
KVAG25
KVAG25
3-circuit control unit, incl. 5 sensors and 5 GF sensors
Type
SKSC3+
SKSC3+
SKSC3+
SKSC3+
SKSC3+
SKSC3+
Expansion tank
Type
AG50S
AG80S
AG80S
AG100S
AG200S
AG200S
l
25
30
30
30
40
40
SPECIAL COLLECTOR FOR COASTAL REGIONS
and CORROSIVE ENVIRONMENT
SK500N-ECO-AL-M
IDMK-AL sets WITHOUT mounting/flashing
IDMK25-AL
Solutions XL
1000 L
Number of collectors
See page 36-37, 39, 41 and 43 for mounting systems
Corrugated pipe connection set
(DN16-20*, 15 m, incl. connections from EWSID
to pump unit and to collector)
*) Collector area < 10 m = DN16, collector area ≥ 10 m = DN20
2
2
Set components
COMFORT E Plus tank / Backup tank
Antifreeze
2x
2x
PSC1000E PSC1000E
1 x PS1000E 1 x PS1000E
ADD ONE OF THE FOLLOWING FRESH WATER MODULE CASCADE SETS
For Wall Mounting
Delivery rate
2 x FWM30i-CU
2 l - 60 l
Incl. 1 recirculation pump
Without recirculation pump
£
6,425.-
6,195.-
Item
no.
131 121
131 124
Incl. 1 recirculation pump
Without recirculation pump
£
4,765.-
4,535.-
Item
no.
131 127
131 130
For Tank Mounting (on PSC-E)
2 x FWM30i-CU
2 l - 60 l
Note: For a accurate dimensioning of FWM30i cascades please contact the SONNENKRAFT Sales Team
Sonnenkraft offer full design and service support. For specification and installation
details refer to our website / or contact us for a bespoke customer experience
SONNENKRAFT SERVICE
ADDITIONAL PRODUCTS - HKM20HE (131 221) - 1,135.-
Optional products (via set change)
Reduced price SLM50HE-O
420.-
Surcharge FWM15i-VA
715.-
Surcharge FWM30i- VA
1,110.-
Note: more info about modules from page 54
2013 prices – all prices are indicated in GBP excluding VAT
31
Hot water / heating systems
comfort E xl
SONNENKRAFT’s COMFORT E XL system guarantees
maximum solar yield for large-scale systems. Areas of
application are many, such as tourism, hospitals and
care facilities as well as public buildings.
3000 L
Collector surface area
30 m
40 m2
£
9,000.-
12,000.-
Hot water requirement (50° C)
I/d
2.000
2.500
Solar coverage
%
36,4
38,4
MWh/a
kWh/m2/a
18,9
698
24,1
667
kg/a
6.695
8.526
Approximate Price indication
for collector field
(without mounting system)
2
Solar Yield (Middle/North Europe)
Solar yield
CO2 emission savings
Solar Yield (South Europe/Middle East/Africa)
Hot water requirement (50° C)
I/d
2.000
2.500
Solar coverage
%
52,6
55,9
MWh/a
kWh/m2/a
28,2
1.041
36,2
1.002
kg/a
9.986
12.814
£
13,600.-
13,700.-
Solar yield
CO2 emission savings
Approximate Price indication
for set components
Recommended tank
type
Fresh water module set*
type
Stratified charging module
type
SLM50HE
Expansion tank
type
AG200S
Antifreeze
HIGH
EFFICIENCY
PS3000E
2 x FWM30i
I
*) Now all solutions
with high efficieny
pumps!
2 x FWM30i
30
PLUS X Award
achieved for
module FWMi
A
Highly efficient
POOL AND / OR BACKUP HEATING
Highly efficient stratified charging of the backup tank by
means of premounted stratified charging module.
Ideally suited for integration of solar swimming pool heating and /
or backup heating
32
40
Comfort E XL Solutions
5000 L
50 m
60 m
15,000.-
18,000.-
3.000
75 m
10000 L
120 m
150 m
22,500.-
36,000.-
3.500
4.000
39,9
40,6
29,4
651
15000 L
200 m
250 m
45,000.-
60,000.-
74,900.-
89,900.-
5.000
7.500
10.000
15.000
20.000
43,5
50,4
46
44,3
39,1
34,3
34,2
630
41,2
608
59
544
76,4
564
100,6
557
128,9
571
150,1
554
10.401
12.095
14.585
20.876
27.034
35.600
45.611
53.095
3.000
3.500
4.000
5.000
7.500
10.000
15.000
20.000
58,7
60,1
77,4
73,8
69,8
67,5
61,7
55,3
44,5
986
52,1
961
63,2
932
89,3
823
118,5
874
156,1
863
205,1
908
242,9
896
15.756
18.441
22.356
31.581
41.933
55.208
72.560
85.909
16,000.-
24,800.-
25,200.-
29,400.-
36,500.-
36,300.-
45,500.-
45,600.-
4 x FWM30i-CU
4 x FWM30i-CU
2
2
2 x PS2000E
2 x FWM30i-CU
2
PS5000E
3 x FWM30i-CU
3 x FWM30i-CU
2
2
2 x PS5000E
SLM120
300 m2
2
Solutions XL
4000 L
2
3 x PS5000E
4 x FWM30i-CU
4 x FWM30i-CU
SLM200
4 x FWM30i-CU
SLM50HE
SLM120
AG200S
AG300S
AG300S
AG500S
AG500S
2 x AG300S
2 x AG500S
SLM200
2 x AG500S
40
50
60
80
100
140
180
200
Hot water
Existing boiler
Circulation
Reheating
or
ct
Hot water
le
l
Co
Boiler
flow
or
ct
le
l
Co
Cold water
Boiler
return
Stratified charging module
Backup tank
Cold water
Stratified charging module
SLM120/200
Fresh water module
Backup tank
Pre-heating
Use in new constructions
Retrofitting application
Fresh, hygienic hot water through continuous water heating (fresh
water module)
Optimal solar energy use through continuous water heating (preheating phase)
Prevention of infections or legionella formation in the drinking
water heating system
Low conversion costs through simple integration into existing
systems without the typical boiler expansion
Higher efficiency than with hot water tank preheating systems
NOTE:
•
Highest possible system efficiency is the main focus of above system
dimensioning
•
These dimensioning tables are in no way replacing professional planning,
which is a mandatory requirement
•
Verify the table results with simulation calculations
(www.sonnenkraft.com/partner area)
•
COMFORT E XL building sets can also be used for partial-solar space
heating systems and solar swimming pool heatings
•
Collector surfaces are rounded
2013 prices – all prices are indicated in GBP excluding VAT
Please use the SONNENKRAFT planning data sheet for your request.
The SONNENKRAFT engineering team will assist in the detailed system
design.
Calculation based on:
•
Regional climate details: Graz, Austria / Rome, Italy
Collector field: SKR500, inclination 45°
•
Water heating with fresh water module, incl. 25% circulation
•
Multi family house hot water requirement profile, 50°C
•
Basis of CO2 savings calculation: Oil-fired system
33
CollectorS
SKR500
SK400N-AL
IDMK-al
GK-HP
The unique and exclusive
SONNENKRAFT collector combines the latest technology with
established know-how. It is the
most efficient collector in our
portfolio.
The versatile SK400N-AL
collector can be installed either
on-roof or in-roof offering total
flexibility.
IDMK-AL in-roof collectors are
directly integrated in the roof
cladding and particularly suited
for roofs with southern exposure.
The brand new GK-HP with
improved efficiency is
the best solution in large scale
installations for roof-mounted
or freestanding collector arrays.
34
SKR500
The unique and exclusive SONNENKRAFT SKR500 collector has an efficiency h0 of
82% making it one of the best performing collectors on the market. It combines the
latest technology with established know-how. The SKR500 is the first collector with a
frame-less glass design and an easy mounting system providing simple and fast installation using only one standard tool.
LESS TOOLS
NECESSARY
Frameless design &
Great Mounting options
The collector design allows a
high flexibility in configurating
the collector field and it´s
hydraulic connections.
For all main applications you
can mount the SKR500 with
very few tools. We call it “Plug
& Flow".
The frameless flat collector looks
great in all installation variants.
The SKR500 has the widest
range of mounting sytems of all
SONNENKRAFT collectors.
Specifications
Collectors
SKR500
111 144
SKR500
SKR500L
011-7S 1277F
011-7S 1284F
HxWxD:
2079x1240x95
HxWxD:
1240x2079x95
Solar Keymark Reg. No.
Dimensions (mm)
38 kg
Weight
SKR500L
111 145
2.57 m
Aperture area
2.26 m2
Absorber area
2.30 m2
SKR-TH
110 047
2
SKR-ES
110 048
110 050
10 to 35 l/h per m2
Recommended throughput
Max. 12 pcs.
parallel
Collector field piping
Max. 10 pcs.
parallel
SKR-EV
Collector housing
15.-
HVS25-EWSID
110 065
2079 mm
Meander
Collector glazing
3.2 mm toughened, low iron solar
safety glass
Efficiency (Aperture) ƞ0a
0.82
Heat SKR-HV*
transfer coefficientSKR-HV*
a1a
3.821
Temperature depending
1240 heat
mm transfer
42 mm coefficient
1240 mm a42 mm
2a
0.0108
1240
mm
SKR-TH
HVS25
SKR-ES*
HVS25
SKR-ES*
HVS25
SKR-SA
HVS25
SKR-SA
3.514
BBALGK/SKR
111 826
1 pc. concrete ballast for
SKR500, weight: 285 kg
0.0147
SKR-HV*
40.255.-
SKR-HV*
SKR-TH
NOTE!
The black marked connectors (*) are included within
the roof-mounting systems,
the orange/bold ones must
be ordered separately (see
next 2 pages)!
170.-
Recommended connection
SKR-EV
SKR-ES*
SKR-SA
SKR-HV*
2013 prices – all prices are indicated in GBP excluding VAT
Hydraulic connection set
for 25 m2 (4 SKR-SA +
connections DN20-1” female
thread + 4 sealings)
1 x SKR repair connector;
for collector or connector
replacement
110 049
0.794
25.-
Air vent for SKR collector, 1
x per collector field
SKR-RV
Hydraulic design
15.-
SKR-EV
50 mm mineral wool
Heat insulation
2 x end caps for blanking
off unused SKR connections
20.-
110 074
Deep-drawn, salt water resistant
aluminium tray
45.-
1 x 90°, ø 18 system corner
connector
95 % / 5 %
SKR-HV*
Immersion sleeve for
temperature measurement
directly in the medium; 1 x
per collector field
SKR-WA
110 052
Full surface aluminium absorber,
highly selective vacuum coating
Absorber
625.-
13.-
110 051
18 mm copper pipe
Connections
Landscape format
mounting
1 x system connection 1"
male flat seal on SKR quick
connector
SKR-SA
Minimum 15˚, maximum 75˚
Collector incline
625.-
2 x hydraulic SKR quick
connectors; for the toolfree hydraulic connection
SKR-HV
10 bar
Max. operation pressure
Portrait format mounting
Accessories/Spare parts
38.5 kg
Gross area
Absorption/Emission
SKR-HV*
Collectors
High Flexibility
2079 mm
*
Roof-mounted collector
SKR-HV*
1240 mm
42 mm
SKR-HV*
1240 mm
42 mm
1240 mm
35
SKR500
No. of mounting supports2)
No. of
collectors1)
roof-mounting systems
Universal roof
Sheet metal roof
Bench screw mounting systems
Support plate mounting systems
parallel
SSPR
tilted 20˚
SSA20R
tilted 45˚
SSA45R
tilted 20˚
BDA20R
parallel
BDPR
tilted 45˚
BDA45R
Note: Please choose the mounting system that fits to your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!
SKR500
1
2
112 921
155.-
112 933
235.-
112 945
245.-
111 753
555.-
111 765
605.-
111 777
615.-
2
2
112 922
265.-
112 934
330.-
112 946
340.-
111 754
645.-
111 766
700.-
111 778
710.-
3
4
112 923
425.-
112 935
550.-
112 947
570.-
111 755
1,190.-
111 767
1,290.-
111 779
1,310.-
4
4
112 924
520.-
112 936
650.-
112 948
665.-
111 756
1,285.-
111 768
1,390.-
111 780
1,410.-
5
5
112 925
655.-
112 937
815.-
112 949
840.-
111 757
1,615.-
111 769
1,740.-
111 781
1,765.-
6
6
112 926
780.-
112 938
970.-
112 950
995.-
111 758
1,925.-
111 770
2,080.-
111 782
2,110.-
7
7
112 927
915.-
112 939
1,135.-
112 951
1,170.-
111 759
2,250.-
111 771
2,430.-
111 783
2,465.-
8
8
112 928
1,035.-
112 940
1,290.-
112 952
1,325.-
111 760
2,565.-
111 772
2,770.-
111 784
2,810.-
9
10
112 929
1,195.-
112 941
1,510.-
112 953
1,560.-
111 761
3,105.-
111 773
3,365.-
111 785
3,410.-
10
11
112 930
1,315.-
112 942
1,665.-
112 954
1,720.-
111 762
3,420.-
111 774
3,700.-
111 786
3,755.-
11
12
112 931
1,450.-
112 943
1,830.-
112 955
1,890.-
111 763
3,745.-
111 775
4,055.-
111 787
4,110.-
12
13
112 932
1,575.-
112 944
1,985.-
112 956
2,050.-
111 764
4,060.-
111 776
4,390.-
111 788
4,445.-
112 987
25.-
112 988
55.-
112 989
60.-
111 789
215.-
111790
255.-
111 792
260.-
Additional
mounting
supports for
SKR500
SKR500L
1
2
112 957
200.-
112 967
250.-
112 977
255.-
112 701
585.-
112 711
640.-
112 721
645.-
2
3
112 958
370.-
112 968
440.-
112 978
450.-
112 702
945.-
112 712
1,030.-
112 722
1,040.-
3
4
112 959
540.-
112 969
630.-
112 979
645.-
112 703
1,305.-
112 713
1,420.-
112 723
1,430.-
4
6
112 960
735.-
112 970
870.-
112 980
890.-
112 704
1,880.-
112 714
2,055.-
112 724
2,070.-
5
7
112 961
900.-
112 971
1,065.-
112 981
1,085.-
112 705
2,240.-
112 715
2,440.-
112 725
2,460.-
6
8
112 962
1,070.-
112 972
1,255.-
112 982
1,280.-
112 706
2,600.-
112 716
2,830.-
112 726
2,855.-
7
10
112 963
1,265.-
112 973
1,495.-
112 983
1,525.-
112 707
3,175.-
112 717
3,465.-
112 727
3,490.-
8
11
112 964
1,435.-
112 974
1,690.-
112 984
1,720.-
112 708
3,535.-
112 718
3,855.-
112 728
3,885.-
9
12
112 965
1,605.-
112 975
1,880.-
112 985
1,915.-
112 709
3,895.-
112 719
4,245.-
112 729
4,275.-
10
14
112 966
1,795.-
112 976
2,120.-
112 986
2,160.-
112 710
4,470.-
112 720
4,875.-
112 730
4,915.-
112 987
25.-
112 991
50.-
112 992
50.-
111 789
215.-
111 791
245.-
111 793
245.-
Additional
mounting
supports for
SKR500L
1) All listed installations sets also contain the appropriate number of
hydraulic connections SKR-HV and two end caps SKR-ES. Per collector
array 2 connectors have to be ordered separately (see drawings on previous
page eg. SKR-SA or SKR-WA, ...)
2) The listed installation systems are designed for a maximum snow load
from 1,8 up to 2,5 kN/m2 and a wind load from 140 of up to 150 km/h. The
loads require the stated number of support members and a rafter spacing
36
of 90 cm. For detailed information and requirements please follow the
appropriate installation manual! For snow loads higher than 1,25 kN/m2
metal roof tiles are recommended!
3) Weight per concrete ballast element: 285 kg. The concrete ballast
elements shall be mounted only on sufficiently load-carrying roof surface
and roof sub-construction. The check of the load-carrying capacity by an
expert is mandatory!
Roof bracket for high profile tiles
Roof bracket mounting systems
tilted 20˚
DBA20R
parallel
DBPR
height adjustable
(125 - 165 mm)
fixed height
(165 mm)
parallel
DBPR-H
parallel
DBPR-R
No. of mounting supports2)
No. of mounting supports2)
No. of
collectors1)
Tiled roof
Tiled roof
Flat roof
Concrete ballast3)
Wall
mounting
tilted 45˚
BBALSKR45
tilted 45˚/60˚
WA45-60R
Note: Please choose the mounting system that fits to your roof type. In case of increased snow loads or different rafter spacing additional mounting supports are necessary!
1
2
112 649
160.-
112 661
250.- 112 649-H
335.- 112 649-R
275.-
2
111 827
755.-
112 731
600.-
2
2
112 650
235.-
112 662
340.- 112 650-H
425.- 112 650-R
365.-
2
111 828
845.-
112 732
705.-
3
4
112 651
380.-
112 663
580.- 112 651-H
750.- 112 651-R
630.-
3
111 829
1,275.-
112 733
1,065.-
4
4
112 652
535.-
112 664
675.- 112 652-H
845.- 112 652-R
725.-
4
111 830
1,685.-
112 734
1,410.-
5
5
112 653
675.-
112 665
850.- 112 653-H
1,060.- 112 653-R
910.-
5
111 831
2,115.-
112 735
1,775.-
6
6
112 654
795.-
112 666
1,010.- 112 654-H
1,265.- 112 654-R
1,085.-
6
111 832
2,525.-
112 736
2,120.-
7
7
112 655
935.-
112 667
1,185.- 112 655-H
1,480.- 112 655-R
1,270.-
7
111 833
2,955.-
112 737
2,480.-
8
8
112 656
1,060.-
112 668
1,345.- 112 656-H
1,680.- 112 656-R
1,445.-
8
111 834
3,365.-
112 738
2,830.-
9
10
112 657
1,225.-
112 669
1,580.- 112 657-H 2,005.- 112 657-R
1,705.-
9
111 835
3,795.-
112 739
3,190.-
10
11
112 658
1,350.-
112 670
1,740.- 112 658-H 2,205.- 112 658-R
1,875.-
10
111 836
4,205.-
112 740
3,535.-
11
12
112 659
1,490.-
112 671
1,915.- 112 659-H 2,420.- 112 659-R 2,065.-
11
111 837
4,635.-
112 741
3,895.-
12
13
112 660
1,615.-
112 672
2,075.- 112 660-H 2,625.- 112 660-R 2,235.-
12
111 838
5,045.-
112 742
4,245.-
Additional
mounting
supports
SKR500
112 693
30.-
112 694
111 849
315.-
110 058
240.-
65.-
112 699
105.-
112 826
75.-
SKR500L
1
2
112 673
205.-
112 683
260.- 112 673-H
365.- 112 673-R
305.-
2
111 839
765.-
112 743
500.-
2
3
112 674
380.-
112 684
460.- 112 674-H
610.- 112 674-R
525.-
3
111 840
1,215.-
112 744
830.-
3
4
112 675
550.-
112 685
660.- 112 675-H
860.- 112 675-R
745.-
4
111 841
1,660.-
112 745
1,155.-
4
6
112 676
750.-
112 686
915.- 112 676-H
1,215.- 112 676-R
1,040.-
6
111 842
2,420.-
112 746
1,660.-
5
7
112 677
925.-
112 687
1,115.- 112 677-H
1,465.- 112 677-R
1,260.-
7
111 843
2,865.-
112 747
1,990.-
6
8
112 678
1,095.-
112 688
1,315.- 112 678-H
1,715.- 112 678-R
1,480.-
9
111 844
3,625.-
112 748
2,490.-
7
10
112 679
1,295.-
112 689
1,565.- 112 679-H 2,070.- 112 679-R
1,775.-
11
111 845
4,380.-
112 749
2,995.-
8
11
112 680
1,470.-
112 690
1,765.- 112 680-H 2,320.- 112 680-R
1,995.-
12
111 846
4,830.-
112 750
3,320.-
9
12
112 681
1,640.-
112 691
1,965.- 112 681-H 2,570.- 112 681-R
2,215.-
13
111 847
5,275.-
112 751
3,650.-
10
14
112 682
1,840.-
112 692
2,220.- 112 682-H 2,925.- 112 682-R
2,510.-
15
111 848
6,035.-
112 752
4,155.-
Additional
mounting
supports
SKR500L
112 693
30.-
112 696
111 850
295.-
110 059
175.-
55.-
112 699
105.-
112 826
75.-
Mounting systems for roof-mounted collectors
SSPR
Bench screw
parallel
SSAR
Bench screw
tilted
DBPR
Roof bracket
parallel
2013 prices – all prices are indicated in GBP excluding VAT
DBAR
Roof bracket
tilted
BDPR
Support plate
parallel
BDAR
Support plate
tilted
BBALSKR45
Concrete ballast
WA45-60R
Wall mounting
37
Collectors
SKR500
Roof-mounted collector
SK500-ECO-AL
SK500-ECO-AL is the best solution in it’s class for roof-mounted or freestanding collector systems. The attractive, high-quality and high-performance collector withstands all
types of weather.
Long lasting
durability
HIgh
efficiency
Several mounting
options
Use of weatherproof materials
ensures that the SK500-ECOAL will provide solar energy for
many years.
New: Mediterranean version for
coastal regions.
The SK500-ECO-AL reaches
high water temperatures very
fast because of the highly
selective vacuum absorber
coating.
The flexibility of
SONNENKRAFT mounting
systems enables you to use
the collector on almost all roof
types and roof angles.
Specifications
Collector
SK500N-ECO-AL
Portrait format mounting
625.-
Landscape format
mounting
625.-
Portrait format mounting,
for corrosive environments
(e.g. costal regions)
755.-
IWS50
Corrugated connector hose;
50 cm long, 1” male/female
screw connection
30.-
IWS100
Corrugated tube connecting
hose, 100cm long, 1” male/
female screw connection
40.-
Silicone roof duct up to
35mm diameter, EPDM tube
sleeve with roofmounting
flange
25.-
111 137
Width incl. connection
011-7S190 F
011-7S1568 F
HxWxD: 2079x1239x100
HxWxD: 1239x2079x100
1257 mm
2098 mm
2.57 m
Aperture area
2.3 m2
Absorber area
2.2 m2
2
141 520
141 521
Recomm. throughput
15 to 40 l/h per m2
Collector field piping
Max. 6 units in series*
Collector glazing
140 009
Minimum 15˚, maximum 75˚
* To compensate for thermal linear expansion, expansion
bends (e.g. IWS50) are needed starting with 4 collectors
SK500-ECO-AL in series.
Full-surface aluminium absorber, highly
selective vacuum coating
SK500N-ECO-AL
SK500N-ECO-AL
Harp
95 % / 5 %
Absorption/Emission
Heat insulation
SDD
1“ screw connection male/female in top left and
top right
Hydraulic design
Collector housing
111 153
10 bar
Max. operation pressure
Absorber
SK500N-ECO-AL-M
Accessories
Gross area
Connections
111 150
40 kg
Weight empty
Collector incline
SK500L-ECO-AL
F
F
Deep-drawn, salt water resistant aluminium
tray
50 mm mineral wool
2079
Dimensions (mm)
SK500L-ECO-AL
2079
Solar Keymark Reg. No.
SK500N-ECO-AL
3.2 mm toughened, low iron solar safety glass
Efficiency (Aperture) ƞ0a
0.763
0.759
Heat transfer coefficient a1a
3.322
3.365
Temperature depending
heat transfer coefficient a2a
0.018
0.020
1239
22
1239
22
SK500L-ECO-AL
SK500L-ECO-AL
F
1239
F
38
2079
22
2079
22
SK500-ECO-AL
roof-mounting systems
No. of
collectors1)
No. of
mounting
supports2)
Note: Please choose the
mounting system that fits your
roof type. In case of increased
snow loads or different rafter
spacing additional mounting
supports are necessary!
Universal roof
Tiled roof
Bench screw mounting systems
Roof bracket mounting systems
parallel
SSP
parallel
DBP
tilted 45˚
SSA45
tilted 20˚
SSA20
tilted 20˚
DBA20
1
2
111 501
110.-
111 531
210.-
111 549
225.-
111 601
140.-
111 631
215.-
2
2
111 502
145.-
111 532
250.-
111 550
260.-
111 602
175.-
111 632
250.-
3
3
111 503
210.-
111 533
370.-
111 551
390.-
111 603
260.-
111 633
375.-
4
5
111 504
315.-
111 534
580.-
111 552
610.-
111 604
400.-
111 634
590.-
5
6
111 505
385.-
111 535
700.-
111 553
740.-
111 605
485.-
111 635
710.-
6
7
111 506
455.-
111 536
820.-
111 554
865.-
111 606
570.-
111 636
830.-
111 567
25.-
111 572
80.-
111 576
85.-
111 649
45.-
111 654
80.-
Additional mounting supports
Collectors
SK500N-ECO-AL
SK500L-ECO-AL
1
2
111 507
130.-
111 537
210.-
111 555
225.-
111 607
170.-
111 637
215.-
2
3
111 508
225.-
111 538
345.-
111 556
360.-
111 608
280.-
111 638
355.-
3
5
111 509
360.-
111 539
560.-
111 557
590.-
111 609
455.-
111 639
575.-
4
6
111 510
450.-
111 540
695.-
111 558
730.-
111 610
570.-
111 640
710.-
111 599
25.-
112 507
65.-
112 508
70.-
111 672
45.-
111 673
70.-
Additional mounting supports
No. of
collectors1)
No. of
BBALSK2)
Flat roof
Concrete ballast mounting systems3)
tilted 35˚
BBALSK35
tilted 45˚
BBALSK45
SK500NECO-AL
1
2
111 807
765.-
111 813
765.-
2
3
111 808
1,140.-
111 814
1,135.-
3
4
111 809
1,520.-
111 815
1,510.-
4
5
111 810
1,895.-
111 816
1,885.-
5
6
111 811
2,270.-
111 817
2,260.-
6
7
111 812
2,645.-
111 818
2,635.-
1) Included within each mounting systems are 2 pcs.
Cu22 - R1" brazed unions per collector array.
2) The listed installation systems are designed for a
maximum snow load sk from 1,25 up to 2,3 kN/m2 and
a wind load from 102 of up to 150 km/h. The loads
require the stated number of support members and a
rafter spacing of 80 cm. For detailed information and
requirements please follow the appropriate installation
manual! For snow loads higher than 1,25 kN/m2 metal
roof tiles are recommended!
3) Weight per concrete ballast element: 215 kg. The
concrete ballast elements shall be mounted only on
sufficiently load-carrying roof surface and roof subconstruction. The check of the load-carrying capacity by
an expert is mandatory!
SK500L-ECO-AL
1
2
111 819
700.-
111 819
700.-
2
3
111 820
1,045.-
111 820
1,045.-
3
4
111 821
1,390.-
111 821
1,390.-
4
5
111 822
1,735.-
111 822
1,735.-
2013 prices – all prices are indicated in GBP excluding VAT
39
ON/IN-Roof mounted collector
SK400N-AL
This handy collector with its 2m2 collector area can be used flexibly either on any roof
or integrated into the roof cladding. The compact design enables an economic match of
collector area and storage tank volume.
Long lasting
durability
HIgh
solar yield
Several mounting
options
Use of weatherproof materials
ensures that the SK400N-AL
will provide solar energy for
many years.
The SK400N-AL reaches high
water temperatures very fast
because of the highly selective
vacuum absorber coating.
This versatile and easy to
handle 2 m2 collector can be
installed either in-roof or onroof offering total flexibility.
Specifications
Dimensions (mm)
Width incl. connection
Weight empty
011-7S1708 F
HxWxD: 2039x1039x90
1058 mm
2.12 m2
Aperture area
1,78 m
Absorber area
1,77 m2
Max. operation pressure
10 bar
15 to 40 l/h per m2
Onroof: max. 6 units in series
Inroof: max. 2 units in series
Collector incline
Minimum 15˚, maximum 75˚
Absorber
Hydraulic design
Absorption/Emission
Collector housing
Heat insulation
Collector glazing
Corrugated connector hose;
50 cm long, 1” male/female
IWS50
141 520
screw connection
Corrugated connector hose;
100 cm long, 1” male/female
screw connection
IWS100
141 521
30.40.-
Accessories IN ROOF
CUASB
110 021
1“ male/female screw connections
SDD
Full-surface aluminium absorber, highly
selective vacuum coating
140 009
Copper corner connection for
hard soldering roof inlets of
collector field flow or return
10.-
Silicone roof duct up to 35 mm
diameter, EPDM tube sleeve
with roofmounting flange
25.-
Harp
95 % / 5 %
Connections
SK400N-AL
Deep-drawn, salt water resistant
aluminium tray
40 mm mineral wool
F
3.2 mm toughened, low iron solar safety
glass
Efficiency (Aperture) ƞ0a
0.779
Heat transfer coefficient a1a
3.914
Temperature depending heat
transfer coefficient a2a
0.012
1039
40
545.-
Accessories ON ROOF
2
Collector field piping
Connections
Portrait format mounting
111 174
32 kg
Gross area
Recommended throughput
SK400N-AL
2039
Solar Keymark Reg. No.
Collector
22
SK400N-AL
ON-roof mounting systems
No. of
collectors1)
Universal roof
No. of mounting supports2)
Tiled roof
Bench screw mounting systems
Note: Please choose the mounting
system that fits your roof type. In case
of increased snow loads or different
rafter spacing additional mounting
supports are necessary!
parallel
SSP
tilted 20˚
SSA20
Roof bracket mounting systems
tilted 45˚
SSA45
parallel
DBP
tilted 20˚
DBA20
SK400N-AL
2
112 903
2
2
3
3
4
110.-
112 909
225.-
112 915
112 904
140.-
112 910
255.-
112 905
200.-
112 911
365.-
5
112 906
310.-
112 912
5
6
112 907
375.-
6
7
112 908
111 570
Additional mounting structures
SK400N
275.-
112 637
175.-
112 643
112 916
310.-
112 638
200.-
112 644
310.-
112 917
455.-
112 639
285.-
112 645
460.-
575.-
112 918
735.-
112 640
475.-
112 646
740.-
112 913
695.-
112 919
880.-
112 641
550.-
112 647
885.-
450.-
112 914
810.-
112 920
975.-
112 642
650.-
112 648
1,035.-
40.-
111 574
95.-
111 578
110.-
111 652
65.-
111 656
110.-
1) Included within each mounting systems are 2 pcs. Cu22 - R1" brazed
unions per collector array.
280.-
Collectors
1
2) The listed installation systems are designed for a maximum snow load
sk from 1,25 up to 2,3 kN/m2 and a wind load from 102 of up to 150 km/h.
The loads require the stated number of support members and a rafter
spacing of 80 cm. For detailed information and requirements please
follow the appropriate installation manual! For snow loads higher than
1,25 kN/m2 metal roof tiles are recommended!
SK400N-AL
IN-roof mounting systems
No. of collectors1)
Flashings for High
Profile Tiles
Flashings for Tiles
Flashings for Shingle
/ Slate
Note: Select the mounting system that matches to the type of roof.
Other mounting options on request.
Included within each mounting systems are 2 pcs. Cu22 - R1" brazed
unions per collector array.
1)
Flashing colour: RAL 7016
1
112 107
550.-
112 108
450.-
112 109
375.-
2
112 110
645.-
112 111
550.-
112 112
450.-
Note: The listed installation systems are designed for a maximum snow load sk up to 2,3 kN/m2 and a wind load from 110 km/h up to 135 km/h. The
loads require the included number of support members and a rafter spacing of 80 cm. For detailed information and requirements please follow the
installation manual!
2013 prices – all prices are indicated in GBP excluding VAT
41
IN-Roof mounted collector
IDMK-AL
The SONNENKRAFT IDMK-AL in-roof collector is directly integrated in the roof cladding
and particularly suited for roofs with southern exposure. The collector is available in 5
different sizes and offer mounting options for any kind of roof tiles.
Perfect integration
into roof design
Can be soldered
or screwed
HIgh
efficiency
The different module sizes and
the option of combining roof
collectors next to and above
one another provides the ideal
solution for every roof.
The connections are suitable
both for screwing and soldering.
The IDMK-AL reaches high
water temperatures very fast
because of the highly selective
vacuum absorber coating.
Collectors (Manual mounting)
Specifications
Solar Keymark Reg. No.
IDMK12/25: 011-7S1551 F
IDMK50/75/100: 011-7S1714 F
Max. operation pressure
10 bar
Recommended throughput
15 to 40 l/h per m2
Collector field piping
IDMK12/25
Max. 6 pcs. in series
Collector incline
Minimum 20˚, maximum 65˚
Connections
1“ female screw connection or
Cu22
IDMK12-AL
111 214
IDMK25-AL
111 213
IDMK50-AL
111 215
95 % / 5 %
Absorption/Emission
IDMK75-AL
Wood frame
Collector housing
111 216
50 mm mineral wool
Heat insulation
Hydraulic design
Harp
Collector glazing
3.2 mm toughened, low iron solar
safety glass
In-roof module collector with 2.52 m2
(Aperture area: 2.32 m2; Absorber
area 2.28 m2), weight: 49 kg,
H x W x D: 2058 x 1227 x 105 mm
595.-
IDMK100-AL
111 217
In-roof module collector with 5.05 m2
(Aperture area: 4.64 m2; Absorber
area 4.56 m2), weight: 98 kg,
H x W x D: 2058 x 2454 x 105 mm,
1,470.-
In-roof module collector with 7.57 m2
(Aperture area: 6.96 m2; Absorber
area 6.84 m2), weight: 147 kg,
H x W x D: 2058 x 3681 x 105 mm
2,205.-
In-roof module collector with 10.1 m2
(Aperture area: 9.28 m2; Absorber
area 9.12 m2), weight: 196 kg
H x W x D: 2058 x 4908 x 105 mm
2,940.-
12
25
50/75/100
Efficiency (Aperture) ƞ0a
0.765
0.776
0.765
Heat transfer coefficient a1a
3.951
3.293
3.951
Delivery IDMK50-100-AL only in connection with an order made for
Sonnenkraft crane mounting. Metal flashings for all IDMK and
mounting and hydraulic sets for IDMK12 and IDMK25 must be ordered
separately. The collector backside must be adequately ventilated! We
recommend using a roof foil.
Temperature depending heat
transfer coefficient a2a
0.011
0.011
0.011
Accessories
IDMK
For optional soldered connections
Connections
IDMK12
F
IDMK25
IDMK50
F
F
Copper corner connection, for
IDMK100connecting adjacent collectors by
110 006
hard soldering
CUVB
IDMK75
F
110 021
1015
KVB25
110 019
F
F
IDMK100
IDMK100
2 0 5 82 0 5 8
3681
Copper corner connection for hard
soldering roof inlets of collector field
flow or return
10.-
Copper corner connection for screw
connection of 2 collectors mounted
next to each other
15.-
4908
DM42-55 2 pc. sealing collar, 42-55mm, for
40.-
DM50-70 2 pc. sealing collar, 50-70mm, for
45.-
140 030
2 0 5 82 0 5 8
1227
IDMK75
IDMK75
2 0 5 82 0 5 8
1227
F
F
2454
10.-
2058
2058
2058
F
2058
CUASB
IDMK50
IDMK50
460.-
Collectors (crane mounting)
Full-surface aluminium absorber,
highly selective vacuum coating
Absorber
In-roof module collector with
1.25 m2 (Aperture area: 1.10 m2;
Absorber area 1.08 m2), weight: 25 kg,
H x W x D: 1015 x 1227 x 105 mm
140 031
roof inlet
roof inlet
The pipe collar is made of acrylic adhesive with a permanently elastic
EPDM socket. Suitable for indoors and outdoor application.
2454
2454
42
3681
4908
3681
4908
IDMK-al
inroof-mounting systems
No. of
collectors
Mounting and
hydraulic set
Note: Select the
mounting system
that matches the
type of roof.
Sheet metal
flashing colour:
RAL 7016
Mounting brackets,
screw connections,
sensor tube
extension, flashing
connection strips,
roof battens, screws,
seals, wooden
wedge(s)
Tile
Roof shingle
Plain tile / Slate
Mounting and
hydraulic set
High profile tile
(15-65° pitch)
Mounting brackets,
screw connections,
sensor tube extension,
flashing connection
strips, roof battens,
screws, seals, wooden
wedge(s)
1
111 975
110.-
111 922
340.-
111 940
355.-
111 958
315.-
112 141
135.-
112 117
465.-
2
111 976
120.-
111 921
395.-
111 939
395.-
111 957
370.-
112 142
150.-
112 118
615.-
3
111 977
195.-
111 923
485.-
111 941
485.-
111 959
500.-
112 143
250.-
112 119
805.-
4
111 978
275.-
111 924
575.-
111 942
575.-
111 960
575.-
112 144
350.-
112 120
1,000.-
5
111 979
350.-
111 925
685.-
111 943
660.-
111 961
660.-
112 145
445.-
112 121
1,190.-
6
111 980
425.-
111 926
785.-
111 944
750.-
111 962
750.-
112 146
545.-
112 122
1,385.-
+1
112 100
95.-
111 909
110.-
111 912
90.-
111 915
90.-
112 140
100.-
112 114
190.-
IDMK12-AL Single-row collector fields
1
111 975
110.-
111 933
425.-
111 951
370.-
111 969
370.-
112 141
135.-
112 129
590.-
2
111 987
155.-
111 933
425.-
111 951
370.-
111 969
370.-
112 153
165.-
112 129
590.-
3
111 988
260.-
111 935
535.-
111 953
455.-
111 971
455.-
112 154
275.-
112 130
785.-
4
111 989
365.-
111 936
645.-
111 954
545.-
111 972
545.-
112 155
385.-
112 131
975.-
5
111 990
470.-
111 937
755.-
111 955
630.-
111 973
630.-
112 156
495.-
112 132
1,170.-
6
111 991
575.-
111 938
865.-
111 956
720.-
111 974
720.-
112 157
605.-
112 133
1,360.-
Dual-row collector fields (2x IDMK25)
1
111 981
265.-
111 928
530.-
111 946
555.-
111 964
555.-
112 147
270.-
112 123
665.-
2
111 982
280.-
111 927
580.-
111 945
595.-
111 963
595.-
112 148
175.-
112 124
815.-
3
111 983
465.-
111 929
695.-
111 947
720.-
111 965
720.-
112 149
480.-
112 125
1,040.-
4
111 984
655.-
111 930
940.-
111 948
840.-
111 966
840.-
112 150
670.-
112 126
1,265.-
5
111 985
840.-
111 931
1,080.-
111 949
960.-
111 967
960.-
112 151
865.-
112 127
1,490.-
6
111 986
1,025.-
111 932
1,225.-
111 950
1,080.-
111 968
1,080.-
112 152
1,055.-
112 128
1,715.-
Dual-row collector fields (1x IDMK12 and 1x IDMK25)
1
111 981
265.-
112 017
580.-
112 018
540.-
112 019
540.-
112 147
270.-
112 134
650.-
2
111 992
295.-
111 997
640.-
112 003
585.-
112 008
585.-
112 158
300.-
112 135
800.-
3
111 993
490.-
111 998
780.-
112 004
705.-
112 009
705.-
112 159
505.-
112 136
1,025.-
4
111 994
690.-
111 999
925.-
112 005
825.-
112 010
825.-
112 160
705.-
112 137
1,250.-
5
111 995
885.-
112 001
1,070.-
112 006
945.-
112 011
945.-
112 161
910.-
112 138
1,475.-
6
111 996
1,085.-
112 002
1,210.-
112 007
1,065.-
112 012
1,065.-
112 162
1,110.-
112 139
1,700.-
The listed installation systems are designed for a maximum snow load sk up
to 2,7 kN/m2 and a wind load of up to 150 km/h. The loads require the included
number of support members and a rafter spacing of 80 or 90 cm. For detailed
information and requirements please follow the installation manual!
2013 prices – all prices are indicated in GBP excluding VAT
Special flashing IDMK - Price on request
Special flashing BLXX125, 112 403 for IDMK12 / IDMK25
Note: For your special order, please send us
• a sketch of the collector layout
• the type of flashing (tile, roof shingle, plain tile)
Delivery time: Approx. 4-6 weeks
43
Collectors
IDMK25-AL Single-row collector fields
Large size collector
GK-HP
The GK-HP collector is specially optimized for big scale installations. It can be installed
fast and is easily combined to create a large scale field
value for
money
reduced
installation cost
HIgh
efficiency
The GK-HP delivers optimum
performance to the price, great
for large installations.
The reduced amount of hydraulic
connections and mounting
structures needed per m2 collector
surface, saves time and money
during installation.
The GK-HP reaches high
water temperatures very fast
because of the highly selective
vacuum absorber coating.
Specifications
Collectors - Pallet packpacking
GK5-HP
Solar Keymark Reg. No.
GK10-HP
GK5-HP-VE1
011-S1878 F
HxWxD:
2065x2443x113
HxWxD:
2065x4870x113
87 kg
168 kg
Gross area
5.04 m2
10.06 m2
Aperture area
4.64 m2
9.28 m2
Absorber area
4.63 m
9.26 m2
Dimensions (mm)
Weight
Max. operation pressure
2
10 bar
Recommended throughput
10 to 25 l/h per m2
Collector field piping
max. 70 m2 parallel
Collector incline
Connections
Absorber
Absorption/Emission
Collector housing
Heat insulation
Numbers of collectors packed on one pallet
Minimum 25˚, maximum 75˚
4x 1 /4“ male screw connection
1
111 155
GK5-HP-VE2
111 156
GK5-HP-VE3
111 157
GK5-HP-VE4
111 158
GK5-HP-VE5
111 159
GK5-HP-VE6
111 160
GK10-HP-VE1
111 161
GK10-HP-VE2
Full-surface aluminium absorber,
highly selective vacuum coating
111 162
95 % / 5 %
111 163
50 mm mineral wool
Meander
Hydraulic design
Aluminium frame
Collector glazing
3.2 mm toughened, low iron solar
safety glass
Efficiency (Aperture) ƞ0a
0.809
Heat transfer coefficient a1a
2.858
Temperature depending
heat transfer coefficient a2a
0.015
GK10-HP-VE3
GK10-HP-VE4
111 164
GK10-HP-VE5
111 165
GK10-HP-VE6
111 166
1 x large size collector of 5 m2
2,105.-
2 x large size collectors of 5 m2
3,245.-
3 x large size collectors of 5 m2
4,770.-
4 x large size collectors of 5 m2
6,300.-
5 x large size collectors of 5 m2
7,830.-
6 x large size collectors of 5 m2
9,170.-
1 x large size collector of 10 m2
3,435.-
2 x large size collectors of 10 m2
5,860.-
3 x large size collectors of 10 m2
8,695.-
4 x large size collectors of 10 m2
11,535.-
5 x large size collectors of 10 m2
14,370.-
6 x large size collectors of 10 m2
17,025.-
Delivery time approx. 4-6 weeks.
Collectors - Container packpacking
Pallet packaging for 40Ft High Cube Container Loading
GK5-HP-VC3
111 167
GK5-HP-VC4
111 168
GK5-HP-VC5
111 169
GK10-HP-VC3
111 170
GK10-HP-VC4
111 171
GK10-HP-VC5
111 172
3 x large size collectors of 5 m2
5,165.-
4 x large size collectors of 5 m2
6,625.-
5 x large size collectors of 5 m2
8,050.-
3 x large size collectors of 10 m2
8,920.-
4 x large size collectors of 10 m2
11,820.-
5 x large size collectors of 10 m2
14,695.-
Delivery time approx. 4-6 weeks.
44
MOUNTING OPTIONS BBALGK/SKR
AccessorIes
110 186
GK5/10, 60°
GK5/10-ABS
110 155
GK5/10, 45°
GK5/10-ASS
GK5/10, 30°
110 191
GK5/10-TH
110 156
GK5/10-VW
A
B
C
110 157
D
KLINGER32
110 158
BBALGK/SKR
111 826
Flexible connection set for GK5HP and GK10-HP, containing 1
length compensator of 100 mm
1 1/4“ female and 2 flat gaskets
KLINGER32
65.-
2 x end caps 1 1/4“ (incl. gasket)
for unused connections
25.-
Connection set for GK5-HP and
GK10-HP, 1 1/4 “ female and 1
gasket for 28 mm
15.-
Immersion sleeve 1 1/4 “,
for accurate temperature
measurement (1 pc. per field)
125.-
1 x aluminum profile for
horizontal fitting of mounting
support and support angle
40.5.-
1 x flat gasket 1 1/4 “
1 pc. concrete ballast for GK-HP,
weight: 285 kg
255.-
DIMENSIONS
GK10-HP
GK5-HP
130
2443
4870
GK5/10-ABS
1892
2065
GK5/10-TH
F
GK5/10-ABS
GK5/10-ASS
GK5/10-VS
GK-HP
roof-mounting systems
Snow Load sk
kN/m2
No. of
mounting
supports1)
GK5
up to 1.25 kN/m2
2
GK5
up to 3 kN/m2
2
GK10
up to 1.25 kN/m2
3
GK10
up to 3 kN/m
3
2
Bench screw
parallel
112 901
112 902
Flat roof tilted2)
30°
225.-
360.-
1) The listed installation systems are designed for a maximum snow load
sk from 1,25 up to 3 kN/m2 and a wind load up to 150 km/h. The loads
require the stated number of support members and a rafter spacing of
80 to 120 cm. For detailed information and requirements please follow
the specific installation manual of this product! For snow loads higher
than 1,25 kN/m2 metal roof tiles are recommended!
Flat roof tilted2)
45°
112 590
180.-
112 592
185.-
112 595
240.-
112 597
255.-
112 591
245.-
112 593
255.-
112 596
335.-
112 598
360.-
Flat roof tilted2)
60°
112 594
275.-
112 599
390.-
2) The flat roof mounting sets contain mounting brackets with adjustable
height. Bench screws are not included, therefore mounting srews must be
ordered apart, depending on the type of roof surface/coverage.
Note: Weight per concrete ballast element: 285 kg. The concrete ballast elements shall be mounted only on sufficiently load-carrying roof surface
and roof sub-construction. The check of the load-carrying capacity by an expert is mandatory!
2013 prices – all prices are indicated in GBP excluding VAT
45
Collectors
GK5/10-VS
Tanks
DHWP
PSR-E
PSC-E
PS-E
The DHWP is an easily installed
hot water tank with pre-installed
pump unit and controller. It’s
provided with proven technology
to ensure durability and
efficiency.
The PSR-E tank ensures optimum stratification in the tank
and fits perfectly to the series of
modules from SONNENKRAFT.
With the PSC-E tank you get
the best possible temperature
layering during charging and
discharging due to various
stratification plates and external
stratification via SLM50HE.
The optimal solution for storing
energy at high temperatures in
larger installations. It can work
alone or as backup heating
together with PSR-E/PSC-E.
46
Compact plus Tank
ELB
The ELB hot water tank ensures a very low heat loss because of insulation sprayed
directly onto the tank. A UK compliant tank with pre-fitted TPR valve and two thermostatic controllers
“Plug & Flow"
Proven technology
high efficiency
Every part and detail of the
ELB is made in a way that
allows you to make the installation quickly and easy.
The components and
technology of the ELB is of
the usual high standard of
SONNENKRAFT® products.
The large heat exchanger
surfaces make the tank perfect
for using solar energy.
TANKS
Capacity
l
200
300
400
200
300
400
Skymantel, a CFC free insulation sprayed directly onto the tank,
ensures the lowest heat loss.
200 l, 2 registers, height
1432 mm, Ø540 mm, register
top 0.7 m2/bottom 0.95 m2,
tilted height 1530 mm, weight
approx. 85 kg
1,150.-
300 l, 2 registers, height
1,834 mm, Ø600 mm, register
top 0.81 m2/bottom 1.49 m2,
tilted height 1930 mm, weight
approx. 120 kg
1,375.-
400 l, 2 registers, height
1631 mm, Ø700 mm, register
top 1.0 m2/bottom 1.83 m2,
tilted height 1745 mm, weight
approx. 140 kg
1,535.-
Diameter, insulated
mm
540
600
700
Height, insulated
mm
1432
1834
1631
Tilted height
mm
1530
1930
1745
Weight
kg
85
120
140
Max. water pressure
bar
10
Max. heating pressure
bar
10
Max. solar loop press.
bar
10
Max. operating water
temperature
°C
95
Max. heating system
temperature
°C
110
Max. operating temp. solar
loop
°C
110
Upper heating / reheating
register
m2
0.70
0.81
1.00
(necessary for building regulations)
Lower heating area / solar
register
m2
0.95
1.49
1.83
120 127
Solar heat exchanger
volume
l
6.4
10.4
12.8
Heating system heat
exchanger volume
l
4.8
5.6
6.9
Performance indicator
NL top
NL/
kW
2.4 / 25
2.5 / 27
5.7 / 31
Performance indicator NL
bottom
NL/
kW
4.2 / 31
4.1 / 45
9.4 / 51
ELB200R2E-H-UK
121 145
ELB300R2E-H-UK
121 146
ELB400R2E-H-UK
121 147
TANK Accessories
SDHWK200
Solar domestic hot-water kit
for ELB200R2E-H-UK
550.-
SDHWK300
Solar domestic hot-water kit
for ELB300R2E-H-UK
695.-
SDHWK400
Solar domestic hot-water kit
for ELB400R2E-H-UK
695.-
120 128
120 129
Includes: 2 motorised valves, pressure reducing valve, check valve,
expansion valve, tundish and hot water expansion vessel.
ELB...R2E-H-UK Fits with the following modules
PSKRHE
See page 60
2013 prices – all prices are indicated in GBP excluding VAT
47
Tanks
ELBR2E-H-UK
hot water xl Tank
DHW/elb
The DHW is a special hot water tank for special system designs, e.g. for large sized
systems. The removable high effective fleece insulation jacket simplifies transport into
the boiler room.
Easy INSTALLATION
Proven technology
high efficiency
The DHWP tanks allow quick
and easy tank installation of
the new RLGHE pump unit with
high efficiency pump and presetted control unit.
The components and technology of the DHWP is of
the usual high standard of
SONNENKRAFT® products.
The large heat exchanger
surfaces make the tank perfect
for using solar energy.
TANKS
DHW750
DHW1000
R2
R2
l
733.1
863.7
Diameter, insulated
mm
970
970
Diameter, not insulated
mm
790
790
Height, insulated
mm
1816
2101
Tilted height without lid
mm
1777
2052
Weight
kg
235
254
Max. water pressure
bar
10
Max. heating pressure
bar
10
Max. solar loop press.
bar
10
Max. operating water
temperature
°C
95
Max. heating system
temperature
°C
110
Max. operating temp. solar
loop
°C
110
Upper heating / reheating
register
m
2.00
Lower heating area / solar
register
m2
2.20
Solar heat exchanger
volume
l
15.6
TANK with 1 register
Heating system heat
exchanger volume
l
14.2
ELB1500R1*
1500 l, height 2285 mm,
Ø 1000 mm (with insulation)
on request
Performance indicator
NL top
NL/
kW
12 / 59.5
ELB2000R1*
2000 l, height 2550 mm,
Ø 1100 mm (with insulation)
on request
Performance indicator NL
bottom
NL/
kW
37 / 63
ELB3000R1*
3000 l, height 2980 mm,
Ø 1200 mm (with insulation)
on request
Capacity
2
DHW750R2
DHW tank of 750 litres and 2
registers, incl. insulation
2,750.-
DHW1000R2
DHW tank of 1000 litres and 2
registers, incl. insulation
2,995.-
121 234
121 235
TANK sets
Consisting of tank DHWR2 and Solar Pump unit RLGHE
DHW750R2-SET
Tank set DHW750R2 with
RLGHE
3,580.-
DHW1000R2-SET
Tank set DHW1000R2 with
RLGHE
3,880.-
121 243
121 244
TANK without register
ELB1000*
1000 l, height 2120 mm,
Ø 790 mm (with insulation)
on request
ELB1500*
1500 l, height 2285 mm,
Ø 1000 mm (with insulation)
on request
ELB2000*
2000 l, height 2550 mm,
Ø 1100 mm (with insulation)
on request
ELB3000*
3000 l, height 2980 mm,
Ø 1200 mm (with insulation)
on request
TANK with 2 register
DHWR2 Fits with the following modules
HIGH
EFFICIENCY
A
RLGHE
See page 55
48
ELB1500R2*
1500 l, height 2285 mm,
Ø 1000 mm (with insulation)
on request
ELB2000R2*
2000 l, height 2550 mm,
Ø 1100 mm (with insulation)
on request
ELB3000R2*
3000 l, height 2980 mm,
Ø 1200 mm (with insulation)
on request
Comfort E Tank
PSR-E
The PSR-E tank provides rapid availability of solar energy due to it's well balanced,
innovative stratification design. To increase the tank volume the PSR800E can be connected to a PS800E and the PSR1000E connected to a PS1000E.
20 % heat loss
reduction
Improved
stratification
Return line
stratification
Insulation fleece fits perfectly
to the tank surface and connections, which eliminates
chimney effects. Together with
the patented fleece insulation
caps for unused connections
this results in a better performance compared to standard
foam insulations.
The solar register is encapsulated, giving a faster loading
of the upper part of the tank,
which leads to a better use of
solar heating support during
the colder months of the year.
In the new PSR-E tank there
is no need for a stratification
plate. The return line stratification ensures an increased
temperature difference in the
tank.
Capacity
l
500
780
920
Diameter, with insulation
mm
850
990
990
Diameter, without
insulation
mm
650
790
790
Height, with insulation
mm
1720
1780
2135
Height, without insulation
mm
1664
1688
2038
Tilted height
mm
1710
1740
2080
Weight (without insulation)
kg
110
135
160
Max. heating pressure
bar
3
Max. solar loop pressure
bar
10
Max. operating heating
temp.
°C
Max. operating solar loop
temp.
°C
Solar register heating
surface
m2
1,7
2,3
3
Solar register volume
l
11,5
14,6
20
TANKS
PSR500E
PSR-E tank of 500 litres,
incl. insulation
1,550.-
PSR800E
PSR-E tank of 800 litres,
incl. insulation
1,755.-
PSR1000E
PSR-E tank of 1000 litres,
incl. insulation
1,905.-
121 527
121 528
121 529
TANK sets
Consisting of tank PSR-E, fresh water module FWMi-CU and Solar
Pump unit PSKR18HE
PSR500E-SET
Tank set PSR500E with
PSKR18HE and FWM15i-CU
4,420.-
95
PSR800E-SET
Tank set PSR800E with
PSKR18HE and FWM15i-CU
4,650.-
110
PSR800E30-SET
Tank set PSR800E with
PSKR18HE and FWM30i-CU
4,775.-
PSR1000E-SET
Tank set PSR1000E with
PSKR18HE and FWM15i-CU
4,815.-
PSR1000E30-SET
Tank set PSR1000E with
PSKR18HE and FWM30i-CU
4,940.-
121 538
121 539
121 540
121 541
121 542
Note: FWM15i-VA and FWM30i-VA modules with
stainless steel heat exchanger available on request.
! PSR-E incl. patented insulation caps ISOV-KAP40E
Fits with following modules
HIGH
EFFICIENCY
A
PSKR18HE
See page 55
2013 prices – all prices are indicated in GBP excluding VAT
FWM15i/30i
See page 56
49
Tanks
PSR500E PSR800E PSR1000E
Comfort E plus Tank
PSC-E
With the new PSC-E tank you get the best possible temperature layering during charging and discharging. The PSC800E can be connected to a PS800E and the PSC1000E
connected to a PS1000E
Capacity
20 % heat loss
reduction
Most efficient
Tank
Optimal with heat
pumps
Insulation fleece fits perfectly
to the tank surface and
connections, which eliminates
chimney effects. Together
with the patented fleece
insulation caps for unused
connections this results in a
better performance compared
to standard insulations.
When the PSC-E tank is combined with the new FWM and
SLM50HE modules and the
energy optimized RAS20 you
get the most efficient solution
of today.
The PSC tank has been
approved for heat pump systems, thanks to the integration
of an additional connection for
optimised hot water charging
via heat pumps.
PSC800E
PSC1000E
789
920
l
TANKS
PSC800E
PSC-E tank of 800 litres,
incl. insulation
1,550.-
PSC1000E
PSC-E tank of 1000 litres,
incl. insulation
1,755.-
121 444
Diameter, with insulation
mm
990
Diameter, without insulation
mm
790
Height, with insulation
mm
1860
2140
Height, without insulation
mm
1778
2058
TANK sets
Tilted height
mm
1830
2100
Weight without insulation
kg
136
150
Consisting of tank PSC-E, fresh water module FWMi-CU and
stratification module SLM50HE
Max. heating pressure
bar
3
Max. heating temperature
°C
95
121 445
PSC800E-SET
Tank set PSC800E with
SLM50HE and FWM15i-CU
6,565.-
PSC800E30-SET
Tank set PSC800E with
SLM50HE and FWM30i-CU
6,690.-
PSC1000E-SET
Tank set PSC1000E with
SLM50HE and FWM15i-CU
6,640.-
PSC1000E30-SET
Tank set PSC1000E with
SLM50HE and FWM30i-CU
6,760.-
121 442
121 448
121 443
! PSC-E incl. patented insulation caps ISOV-KAP40E
121 449
Note: FWM15i-VA and FWM30i-VA modules with stainless
steel heat exchanger available on request
Fits with following modules
HIGH
EFFICIENCY
A
SLM50HE
See page 58
A
HKM20HE
See page 59
RAS20
See page 59
HIGH
EFFICIENCY
HIGH
EFFICIENCY
A
A
FWM15i/30i
See page 56
50
HIGH
EFFICIENCY
FWM30i Cascade
See page 57
backup Tank
PS-E
The PS-E tank is the optimal solution for storing energy at high temperatures for larger
installations. It can work both as backup heating or together with stratified charging
and fresh water modules.
20 % heat loss
reduction
Perfect for large
installations
New
combinations
Insulation fleece fits perfectly
to the tank surface and
connections, which eliminates
chimney effects. Together
with the patented fleece
insulation caps for unused
connections this results in a
better performance compared
to standard insulations.
With the ability to be set up
in a parallel installation, the
PS-E tank is the best choice for
larger installations.
The PS800E can now both be
combined with PSC800E and
PSR800E, and PS1000E can be
combined with PSC1000E and
PSR1000E.
Capacity
PS1000E
PS1500E
PS2000E
PS3000E
PS5000E
l
789
920
1425
2006
2670
4967
Diameter, insulated
mm
990
990
1200
1300
1490
1840
Diameter, not insulated
mm
790
790
1000
1100
1250
1600
Height, insulated
mm
1835
2120
2150
2410
2535
2915
Height, not insulated
mm
1775
2058
2097
2358
2435
2815
Tilted height
mm
1830
2100
2200
2450
2590
3050
Weight without insulation
kg
121
134
170
245
295
585
Permissible heating pressure
bar
3
Permissible operating temp. heating
°C
95
accessories
Tanks
PS800E
TANKS
PVS40
Storage tank connector hose for PS800E PS1500E, 2x 1 1/2" male thread
55.-
PVS50
Storage tank connector hose for PS2000E PS5000E, 2x 2" male thread
145.-
ISOV-KAP40E
Insulation cap 6/4", square, for PSR-E,
PSC-E and PS-E tanks up to 1500 l
120 026
120 135
121 970
5.-
PS800E
PS-E tank of 800 litres, including
insulation
1,230.-
PS1000E
PS-E tank of 1000 litres, including
insulation
1,315.-
PS1500E
PS-E tank of 1500 litres, without
insulation
1,275.-
PS2000E
PS-E tank of 2000 litres, without
insulation
1,675.-
PS3000E
PS-E tank of 3000 litres, without
insulation
2,275.-
PS5000E
PS-E tank of 5000 litres, without
insulation
4,725.-
121 433
121 434
121 435
121 436
Can be used as an extension of COMFORT E and COMFORT E Plus systems.
Fits with following modules
121 437
121 438
INSULATIONS
HIGH
EFFICIENCY
HIGH
EFFICIENCY
ISOVPS1500
121 957
Insulation for PS2000E, insulation
A
A
FWM150/225
SLM120/200
See page 57
Insulation for PS1500E, insulation
thickness
100 mm
See page 58
ISOVPS2000 thickness
121 958
100 mm
Insulation for PS3000E, insulation
HIGH
EFFICIENCY
HOCHEFFIZIENZ
ISOVPS3000 thickness
121 959
120 mm
Insulation for PS5000E, insulation
A
FWM30i Cascade
See page 57
2013 prices – all prices are indicated in GBP excluding VAT
A
SLM50HE
ISOVPS5000 thickness
121 960
120 mm
745.795.895.1,415.-
Siehe Seite 58
51
TAnk and module
overview
HIGH
EFFICIENCY
Now all solutions
with high efficieny
pumps!
DHW
PSR-E
PSC-E
PS-E
Wall
mounting
possible
PLUS X Award
achieved for
module FWMi
A
Pumpstations
RLGHE

PSKRHE

PSKR18HE


PSKR18HE-O


Stratification modules
SLM50HE


SLM50HE-O


SLM120
*
SLM200
*
Freshwater modules
FWM15i-CU
FWM30i-CU


***
FWM15i-VA
FWM30i-VA


***
**
**
FWMi Cascade
**
FWM150
*
FWM225
*
**
Heating modules
52
HKM20HE


HKM20HE-O


RAS20


*....... ground mounted, perfect extension system solutions with PSC-E and PS-E
**..... wall- or tank-installation or mixed installation, fits to system solutions with PSR-E, PSC-E and PS-E
***.... with wall mounting kit
Tanks
2013 prices – all prices are indicated in GBP excluding VAT
53
Modules
HIGH
EFFICIENCY
Now all solutions
with high efficieny
pumps!
PLUS X Award
achieved for
module FWMi
A
pskr18HE
fwm15i/30i
slm50HE
Ras20
The PSKR18HE with high efficiency pump is used in combination with the PSR-E-tank for
charging the tank using solar
energy. It can produce fresh hot
water in combination with the
FWMi and can support heating
systems.
Tomorrow's solution is here
today. FWMi, the fresh water
module is intelligent, with high
effiency pumps and works with
any type of water quality. No hot
water storage required. Hygienic
solution that prevents development of legionella.
NEW: Cascade up to 120 l/min.
The SLM50HE is used in
combination with PSC-E-tank
for stratified charging the tank
using solar energy. HE-pumps
and heat metering are already
included.
RAS20 is a heating module
which supports the oil/gas condensing boiler with solar energy,
and improves the efficiency of
the heating system. It works specially well with retrofit solutions,
when installing solar in combination with traditional heating
solutions.
54
Pump stations
RLGHE
The RLGHE is used in combination with DHW-tank for
charging the tank using solar energy.
HIGH
EFFICIENCY
A
quick
Installation
Easy
operation
Nice
Design
The Solar Pump and controller
are pre-assembled and the
module has reduced tubing and
connections.
New: pre-installed on the
COMPACT E tank!
The controller has few buttons because of automatic
operation and requires low
maintenance.
The new module is compact
and in a modern design that
fits every home.
Specifications
Pumping station
180 x 600 x 200 mm
Flow solar circuit
1-13 l/min
Delivery height of Solar Pump
8.5 m
Collector area up to approx.
131 326
˜25 m
max 6 bar
2
Operating pressure
Operating temp. (Flow/Return)
RLGHE
1-line solar station consisting of: high efficiency
solar pump Grundfos Solar PM2 15-105, ball
valves incl. gravity brake, safety valve (6 bar), 1
thermometer and 1 manometer, flow indicator,
air vent, 2-circuit solar control SKSC2HE unit
incl. 2 PT1000 sensors, cap valve 3/4” female,
testing or emptying
max. 140° C / max. 110° C
Collector connections
Compression fitting ø 22 mm
Tank connections
External thread G 3/4 flat seal
pskr18HE
HIGH
EFFICIENCY
The PSKR18HE is used in combination with the PSR-E-tank for charging the tank
using solar energy. It can produce fresh hot water in combination with the FWMi
and it can support heating systems.
New
controller
High operating
range
High efficiency
pumps
Easy and intuitive operating
panel.
The PSKR18HE ensures perfect
flow rate at all times, up to 13
l/min.
The PSKR18HE comes with
a high efficiency pump and
reduces running costs by up
to 80% in comparison to
standard pump units.
A
Specifications
Dimensions WxHxD
PSKR18HE
PSKR18HE-O
1-13 l/min
Delivery height of Solar Pump
8.5 m
Collector area up to approx.
25 m2
Operating pressure
Collector connections
Tank connections
Pumping stations
465 x 570 x 275 mm
Flow solar circuit
Operating temp. (Flow/Return)
575.-
PSKR18HE
131 327
max. 6 bar
max. 140° C / max. 95° C
Compression fitting ø 22 mm
Modules
Dimensions WxHxD
PSKR18HE-O
131 328
2-line solar station consisting of: high
efficiency pump Grundfos Solar PM2
15-105, 2 ball valves incl. gravity brake,
safety valve (6 bar), 2 thermometers and
1 manometer, flow indicator (VFD sensor,
1-12 l/min), air vent, 2-circuit solar control
SKSC2HE unit incl. 4 PT1000 sensors, cap
valve 3/4” female, testing or emptying
875.-
Like PSKR18HE, but without controller
695.-
External thread G 1 flat seal
2013 prices – all prices are indicated in GBP excluding VAT
55
Fresh water modules
FWM15i/30i
Tomorrow's solution is here today. FWMi, the most intelligent fresh water
module on the market with high effiency pumps works with any type of
water quality. No hot water storage required which prevents development
of legionella.
New plate
heat exchanger
High efficiency
pumps
Intelligent
circulation pump
Copper brazed for “normal”
water qualities. Stainless steel
brazed for harsh water qualities. The intelligent flow control
insures resistance to corrosion
and scaling.
The Grundfos Alpha Pump
is the brain of the module. It
collects input data from all
sensors and controls all basic
functions in the FWMi.
The optional circulation pump
can learn when the household
needs hot fresh water and
supplies the correct quantity
right on time. There by saving
energy.
HIGH
EFFICIENCY
A
specifications
Fresh water modules
FWM15i
FWM30i
Width
465 mm
Height
568 mm
Depth
312 mm
Weight without insulation
Delivery rate
Temperature range
FWM30i-CU
15.7 kg
1-15 l/min
2-30 l/min
30-65 (80)°C 2)
90°C
Maximum allowable pressure in tank
3 bar
Maximum allowable temperature of
fresh warm water
131 120-C
11.9 kg
Maximum allowable water
temperature in tank
65 (80)°C
Minimum pressure in cold water
supply line
2 bar
Maximum allowable pressure in cold
water supply line
10 bar
FWM15i-CU
131 118-C
FWM15i-VA
131 119-C
FWM30i-VA
131 117-C
2)
1)
FWM15i-CFK/
FWM30i-CFK
130 456-C-VM
1) The minimum pressure of 2 bar is required to achieve the specified
delivery rate
2) In case of thermal disinfection
FWMi-WMS
130 501
Recommendation
For a quick material selection (CU- or VA-soldering of the heat exchanger
plates) use the following selection (for a detailed overview please use the
product data sheet FWMi):
If the concentration of one of the
indicated water-contents is higher
than mentioned to the right, the
FWM15i/30i-VA has to be used.
Free Chlorine Cl2 > 1 mg/l
Total water hardness > 30 °dH
OR
If the concentration of two of the four
indicated water-contents is higher
than mentioned to the right, the
FWM15i/30i-VA has to be used.
Sulphate SO42 > 70 mg/l
Chloride Ionen Cl > 300 mg/l
pH-value < 7,5 or > 9,0
free CO2 > 5 mg/l
In case of uncertainty please look at the detailed tables in the technical data
sheet or contact your SONNENKRAFT® service center. All concentrations in
mg/l or ppm.
56
15 litres module incl.: 4 insulation
parts, pipe connecting kit, hygienic
perfect continuous flow principle,
copper brazed PHE
1,440.-
30 litres module incl.: 4 insulation
parts, pipe connecting kit, hygienic
perfect continuous flow principle,
copper brazed PHE
1,550.-
15 litres module incl.: 4 insulation
parts, pipe connecting kit, hygienic
perfect continuous flow principle, VAbrazed PHE for harsh water qualities
2,155.-
30 litres module incl.: 4 insulation
parts, pipe connecting kit, hygienic
perfect continuous flow principle, VAbrazed PHE for harsh water qualities
2,550.-
Recirculation pump unit for all FWMi
versions, perfect integratable and
with wireless communication to the
FWMi-module, operating modes: self
learning mode, 24h on, thermostatic
controlled tapping + 5 min, manual
timer programming. Delivery height
adjustable in 3 steps from 1 to 6m
735.-
Wall mounting set for FWM15i/30i
without recirculation pump,
consisting of wall insulation, wall
mounting bracket and corrugated pipe
connectors
595.-
Fresh water moduleS
FWM30i-CascadE
With the new FWMi-Cascade up to 4 FWM30i can be installed in parallel. So
SONNENKRAFT has the optimum solution for the hot water production for all middle
to large scaled projects up to ~120 l/min delivery rate.
A
EffiCient sizing
Easy extension
Security of supply
The sizing of a FWMi cascade
can be done very precisely
to reach the real hot water
demand very exactly and to
achieve the highest level of
economic efficiency.
An unexpected increase in hot
water demand in the future can
be met easily by extending the
cascade.
The FWMi cascade ensures
security of hot water supply
during maintenance. A precise
sizing up to the actual hot
water demand avoids lime and
corrosion.
Fresh Water Module Cascade - Sets
Delivery rate
(65 °C)
Fresh water modules CASCADE
Incl.
1 recirc.
Without
recirc. pump
6,425.-
6,195.-
Wall Mounting
2 x FWM30i-CU
2 - 60 l/min
3 x FWM30i-CU
2 - 90 l/min
4 x FWM30i-CU
2 - 120 l/min
131 121
131 124
9,295.-
9,065.-
131 122
131 125
11,995.-
11,765.-
131 123
131 126
4,765.-
4,535.-
131 127
131 130
6,780.-
6,550.-
Tank Mounting (on PSC-E)
2 x FWM30i-CU
3 x FWM30i-CU
4 x FWM30i-CU
2 - 60 l/min
2 - 90 l/min
2 - 120 l/min
131 128
131 131
8,795.-
8,565.-
131 129
131 132
Note: For a profound dimensioning of FWM30i cascades please
contact the SONNENKRAFT Sales Team
FWMi-WMS
130 501
FWMi-WMS-CFK
130 572
Wall mounting set for FWM15i/30i
without recirculation pump, consisting
of wall insulation, wall mounting bracket
and corrugated pipe connectors
595.-
As FWMi-WMS (130 501) but for FWMimodules containing a recirculation
pump
625.-
Fresh water module - REcirculation
Update
FWMi-C-EXT
130 580
Wall mounting extension set, for
upgrading existing wall mounted
FMW15i/30i (131117-120-C) modules with
a recirculation pump (order recirculation
pump 130456 separately)
345.-
Fresh Water Module Cascade - Single Items
FWMi-C
130 570
FWMi-C-CFK
130 571
FWMi-C-V
130 589
FWM150/225
Cascade set consisting of cascade
valve, mounting rail, ball valves and
accessories for mounting one FWM30i
without recirculation pump
745.-
As FWMi-C (130 570) but for FWMimodules containing a recirculation
pump
785.-
Cascade valve (1 pc. per FWM30i, for
cascade self-installation without wall
mounting sets and cascade sets, max. 4
FWM30i per cascade)
225.-
The freshwater module ensures hygienic hot water without scaling and with minimal stand-by losses.
High
efficiency
Good
hygiene
Ec0nomic
operation
The module has rapid reaction
times without over- or undershooting the preset dispensing
temperature.
The fresh water module
ensures no risk of legionella.
The speed controlled charging
and circulation pump saves
energy.
Specifications
Fresh Water modules
FWM150
FWM225
FWM150
Delivery 40°C
150 l/min
225 l/min
131 102
Fresh water module for hot water
preparation, 150 l/min, 320 kW
12,735.-
Delivery 55°C
100 l/min
150 l/min
FWM225
15,020.-
320 kW
500 kW
Fresh water module for hot water
preparation 225 l/min, 500 kW
Heat exchanger transfer capacity
Hot water outlet, partial load
Hot water outlet, full load
2013 prices – all prices are indicated in GBP excluding VAT
Modules
HIGH
EFFICIENCY
131 103
58 - 60°C
55°C
57
stratification modules
slm50HE
HIGH
EFFICIENCY
The SLM50HE is used in combination with PSC-E-tank for
stratified charging the tank using solar energy.
Controller with
many functions
Higher
efficiency
easy
installation
The innovative controller has a
full graphic display and an easy
operating panel. SD-card can
be used for data logging.
The SLM50HE guarantees an
optimal stratification. There
is an automated hydraulic
balance of the solar system.
And integrated heat quantity
measurement via flow sensor.
The placement of the hydraulic
connections in the bottom and
the “click system” makes the
new SLM50HE very easy to
handle.
A
Specifications
Stratified charging modules
mm
HxWxD:
850x470x285
kg
approx. 25
l/min
2-40
Delivery height of Solar Pump
m
7.5
Collector area up to approx.
m
50
bar
max. 6
Dimensions
Weight
Flow
2
SLM50HE
131 217
SLM50HE-O
131 219
Stratified charging module with high
efficiency pumps, high performance heat
exchanger, diverter valve for optimum
stratification, for PSC tank and wall
mounting, solar pump:Grundfos Solar
PM2 15-75
2,870.-
Stratified charging module with high
efficiency pumps, for PSC tank and wall
mounting, without controller
2,450.-
MAXIMUM OPERATING PRESSURE
Collector circuit / Buffer circuit
SOLAR PUMP / BUFFER LOADING PUMP
Nominal voltage
VAC/Hz
230 / 50
Nominal output
W
4 - 70
Max. delivery height
m
0.3 - 7.5
SLM120/200
Antifreeze
protection
High solar
yield
Efficiency
focus
The bypass pipe in the solar
circuit secures that the system
doesn’t freeze.
The SLM120/200 enables
stratification charging of the
backup tank
The speed controlled charging
pump and the fully insulated
housing saves energy.
Specifications
Stratified charging modules
slm120
Dimensions (HxWxD)
1150 x 780 x 430
kg
85
Spread, primary / secondary
°C
60 - 35 / 29 - 54
Flow, primary / secondary
kg/s
0.660 / 0.575 1.106 / 0.958
Pressure loss, prim. / sec.
kPa
26 / 22
Piping (Solar / Backup)
58
mm
slm200
Weight
Capacity
The large-scale stratified charging module from
SONNENKRAFT® allows solar stratified charging of large
backup tanks.
kW
"
95
60 kW
100 kW
2" / 6/4"
Permitted operating temp.
°C
min. 2 / max. 95
Permitted operating pressure
bar
Solar: 6 / Heating: 3
SLM120
Stratification module for collector surfaces
from 50 to 120 m2 (gross), 60kW
8,495.-
SLM200
Stratification module for collector surfaces
from 120 to 200 m2 (gross), 100 kW
9,750.-
131 209
131 210
Pump specifications
Rated voltage
V / Hz
Power consumption
kw
0.4 / 0.177
230 / 50
Max current consumption
A
2.02 / 0.85
Max. delivery height
kPa
113 / 39
Heating modules
hkm20HE
The HKM20HE is used to support the floor heating and/or
radiator heating system with solar heat.
Unique mounting
options
HIGH
EFFICIENCY
The HKM20HE can be mounted The HKM20HE comes with a
directly on the PSC-E tank or it high efficiency pump, which
can be wall mounted.
requires 80% less energy
to run a heating circuit than
standard pumps of this type.
A
635 x 255 x 225 mm
9 kW (∆t 10K) - 18 kW (∆t 20K)
Delivery height of circulation pump
Heating circuit module for one
weather controlled heating circuit,
incl. high efficiency pump Grundfos
Alpha 2, mixing valve and SKSCEM1
control unit with 1 outdoor sensor, 1
supply line sensor and 1 V-Bus cable
1,135.-
131 222
Like HKM20HE, but without control
unit
895.-
HKM20/
RAS20-WMS
Wall mounting kit for HKM20/RAS20
95.-
HKM20HE
131 221
6m
Kvs
4
Operating pressure
max. 3 bar
Operating temperature
max. 115° C
Tank connections
The powerful pump enables
bridging over larger pressure
losses in the system.
Heating circuit modules
Dimensions H x W x D
Heating circuit connections
More delivery
height
Compression fitting ø 22 mm
External thread G 1 flat seal
RAS20
HKM20HE-O
130 522
Modules
Specifications
Heat output (vmax 1 m/s)
High efficiency
pump
RAS20 is a heating module which supports the oil/gas condensing boiler with
solar energy. The mixing valve and the controlled operation make the solar
energy last much longer. It works especially well in retrofit solutions, when
installing solar in combination with traditional heating solutions.
Unique mounting
options
Optimal
efficiency
compensated return
increase
The RAS20 can be mounted
directly on the PSC-E tank or
it can be wall mounted (for
retrofit systems).
The RAS20 guarantees the
optimal efficiency using solar
energy for the heating system.
The statification in the tank is
not disrupted.
The oil/gas condensing boiler
is only supplied with exactly
as much heat as needed. The
result is a minimum fuel bill.
Specifications
Dimensions H x W x D
Heat output (vmax 1 m/s)
635 x 255 x 225 mm
9 kW (∆t 10K) - 18 kW (∆t 20K)
4
Kvs
Operating pressure / temperature
Heating circuit connections
Tank connections
max. 3 bar / max. 115° C
Compression fitting ø 22 mm
External thread G 1 flat seal
2013 prices – all prices are indicated in GBP excluding VAT
Efficiency improving module
RAS20
131 325
HKM20/
RAS20-WMS
130 522
Heating module to increase the
efficiency of condensing boilers
through solar energy, incl. 3 sensors
835.-
Wall mounting kit for HKM20/RAS20
95.-
59
Additional pumping stations
Pumping station PSKRHE
Accessories
Consists of: Solar pump PM 2 15-85, ball valves with integrated gravity
brake, safety valve - 6 bar, 2 thermometers and 1 manometer, flow
indicator 1-13 l/min, air vent, 2-circuit solar control SKSC2 unit incl. 4
PT1000 sensors, for mounting on wall, cap valve 3/4” female, testing or
emptying
PSKRHE
131 320
Solar Pumping station with
high efficiency pump, up
to approx. 50 m2 collector
surface, for mounting on wall
875.-
60.-
ZWV20
2-way motor valve 3/4”, closed
when power is off (not shown)
90.-
ZWV25
2-way motor valve 1”, closed
when power is off (not shown)
95.-
130 089
Consists of: solar pump, return line ball valve with integrated gravity
brake, solar safety valve 6 bar, thermometer and manometer, 1 flushing
and filling valve, flow indicator 1-13 l/min, expansion tank connection set,
connections with clamping ring screw for Cu22, for wall mounting
131 301
Gravity brake for system
heights > 11 m
130 003
130 004
Pumping station, 1-line insulated
RLGP2270
SKBRLG
320.-
With ST 20/6 Solar Pump
Pump sets
Consists of: circulation pump, pump ball valves including screw pipe joint,
check valve, thermometer and clamping ring screw connections Cu22 (or
3/4“ female threads for PS209), incl. insulation
PS2570
131 402
PS209
Pumping station, 2-line insulated
131 413
Consists of: solar pump, 2 return line ball valves with integrated gravity
brake, solar safety valve 6 bar, 2 thermometers and 1 manometer, 1
flushing and filling valve, air vent, flow indicator 1-13 l/min, expansion
tank connection set, connections with clamping ring screw for Cu22, for
wall mounting
PS25TW
RLGZ2270
131 302
370.-
With ST 20/6 Solar Pump
Expansion pumping station
1-line insulated
131 303
RLG-E-VSK
130 049
290.-
With ST 20/6 Solar Pump
40.-
60
535.-
Drinking water pump set with
star pump Z25/6-1
400.-
PS3010S
Pump set with Stratos 30/1-12
EM pump
1,340.-
PS30TWS
Domestic water pump set with
pump Stratos Z 30/1-12 EM
2,080.-
131 408
Large-scale pumping stations RLGz*
182 326
RLGZ200
Cu10 - Cu18/Cu22 up
to approx. 7.5/12,2 m2
Cu18 - Cu22 up to
approx. 25 m2
182 333
RLGP2270


182 336
RLGZ2270


RLG-E2270


Pipe dimensions
Collector size
Pump set with pump ST 20/9
Consists of: energy saving circulation pump, pump ball valve incl. union
and non return valve
RLGZ100
Connection set for 2 collector
fields
370.-
Large-scale pumping stations*
131 407
For an additional load or 2 collector arrays, can be combined with RLGP
and RLGZ; incl. connecting set for two consumers
RLG-E2270
131 405
Pump set with Yonos PARA
25/6-3
DMS25
* Delivery time on request
Solar Pumping station DN25,
pump UPS 25-80, for large
scaled collector fields
1,145.-
Solar Pumping station DN32,
pump TOP S 30/10-3, for large
scaled collector field
1,205.-
Flow volume meter for
RLGZ100
85.-
ACCESSORIES
Solar and heating control units
145.-
3-circuit control unit, 3 speed-controlled and 1
floating output, 8 sensor inputs, 2 outputs to
control high efficiency pumps (PWM-signal)
SD memory card, 2 inputs for flow sensor,
2 integrated heat meter, graphic display, 13
selectable installation programs (included in
delivery; 6 sensors)
330.-
Heating circuit module for SKSC3+ control units,
for a weather-controlled heating circuit (with a
weekly timer switch and HW priority, max. 3 pcs.
per SKSC3+ control unit). Incl. flow and outdoor
sensor, 5 outputs for recirculation pump,
3-way-diverter valve, external auxiliary heating
for hot water and heating and 1 floating output;
6 sensor inputs (included in delivery: outdoor
sensor, supply line sensor, V-Bus cable) V-Bus
connector conductor and V-Bus cable
215.-
SKSCRAS
2 outputs to control a 3-way valve, 3 sensor
inputs, Vbus, (included in delivery: 2 sensors).
340.-
SKSRTA11
Remote control unit for SKSCEM1, for adjusting
heating curves
45.-
SKSLAN-A
Interface adapter V-Bus-LAN for SKSC2HE
and SKSC3+ incl. software programming and
visualisation of the system data
175.-
SKSGFR
Solar cell for SKSC3+, for recording the current
solar irradiation
85.-
SKSRDL2
141 147
Data logger for SKSC2HE, SKSC3+ and
SKSWMZ2 incl. software and system monitoring.
455.-
SKSCAM
Alarm module for SKSC2HE and SKSC3+
95.-
SKSSD3
Smart display for SKSC2HE and SKSC3+
290.-
141 182
SKSC3+
141 170
SKSCEM1
141 185
141 186
SKSC2HE
SKSC3+
141 105
SKSC2HE
SKSC3+
HE pump drive


Speed-controlled semiconductor relay
units
2
3
Floating standard relay outputs
(additional)
1
Sensor inputs
4
8
GF Vortex Sensor inputs
1
2
Inputs for irradiation sensor
1
Impulse input for volume measuring
instrument
1
SD Card slot
Heat quantity measurement/
calculation
SK-V Bus communication interface


/
/


3
Heating circuit module (optional)
Data logger/PC reading (optional)
Languages


D/GB/I/F
D/GB/I/F/E
141 187
141 112
141 140
141 171
SSA-C
141 167

70.-
GEneral accessories
SKSPT1000K
Temperature sensor for collectors with PT1000
characteristics Ø 5.5 mm, 27 mm
15.-
SKSPT1000S
Temperature sensor for tanks with PT1000
characteristics Ø 6 mm, 45 mm
15.-
SKRTH
Immersion tube, chromed, incl. cable gland,
inner diameter 6.5 mm
10.-
SBATHE
141 106
141 107
141 109
Requirement function
(T function deactivated)
VBus/PWM 0-10V interface to control HE pumps,
for SKSC2HE and SKSC3+
Min. temp. for heat sources


141 110
Immersion tube for swimming pools, stainless
steel, for use in chlorinated water
110.-
Max. temp. for heat consumer


SKSRÜS
Overvoltage protector for collector sensors
25.-
Excess temp. for heat sources


Emergency shut-off


Recooling


Antifreeze


Legionella protection

Reheating/circulation

Operating days counter for control
unit
Operating hours counting for relay



141 113
Heat volume meters
Heat volume meter, bus connection to SKSC3+
and SKSRDL, up to approx. 150 m2 collector
surface area incl. display module, 2 temperature
sensors, 2 immersion sleeves SKSRV25 and
volume gauge 2,5 m3/h
515.-
SKSRV06
Volume measuring instrument V40-25 for
SKSWMZ2 up to approx. 25 m2 collector surface
area
225.-
SKSRV25
Volume measuring instrument V40-25 for
SKSWMZ2 up to approx. 150 m2 collector
surface area
225.-
Heat volume meter up to approx. 30 m2
collector surface area, incl. display module, 2
temperature sensors, 2 immersion sleeves and
volume gauge 1.5 m3/h
280.-
SKSWMZ2
141 146
141 114
141 115

Recording of local irradiation
Common circuits with priority logic


Parallel operation of relay outputs


2013 prices – all prices are indicated in GBP excluding VAT
Accessories
CONTROL
UNITS
2-circuit control unit, 2 temp. difference outputs,
2 outputs to control high efficiency pumps
(PWM-signal), 4 sensor inputs and 1 input for
GF Vortex-sensor, 10 selectable installation
programs (included in delivery; 4 sensors; V-bus
connector conductor
SKSC2HE
SKSWMZ-ECO
141 122
61
ACCESSORIES
heat
exchangers
Plate heat exchangers
Stainless steel plates copper soldered, including insulation
High Flow Types: for solar in the heating return or system
isolation.
PWT20
141 201
PWT30
Pressure losses PWT/PWTS
141 203
Installing a plate heat exchanger before the chlorine feed of a swimming
pool circuit. Not suitable for aluminium pools or salt water. Attention: Avoid
overheating the swimming pool side! Limit the solar side temperature with
a fixed value control (55°C) or else switch off the Solar Pump by means of
a safety thermostat (55°C) in the plate HE. Never allow the Solar Pump to
run with the swimming pool pump switched off!
PWT40
141 205
PW
T5
0
40
S
PW
T
40
40
T
0
T2 PW
PW
SB
0S
T8
PW
0
T5
PW
SB
30
0
500
1000
Type
1500
2000
heighT
2500
3000
3500
Width
4000
4500
Depth
5000
5500
Weight
6000
6500
7000
Connection
(Solarsecondary)
Up to approx. 30 m2 collector surface
area
680.-
PWT40S
Up to approx. 50 m2 collector surface
area
820.-
PWT50S
Up to approx. 70 m2 collector surface
area
995.-
PWT80S
Up to approx. 120 m2 collector surface
area
1,445.-
PWTA
Connections for plate heat exchangers,
4 pcs., suitable for Cu22 and Cu28
100.-
Holder for plate heat exchanger
50.-
141 211
PWTH
141 222
Swimming pool Heat Exchanger
SBPWT20
141 217
PWT20
358
187
125
4.7
1”-1”
PWT30
358
187
171
6.3
1”-1”
PWT40
358
187
171
7.9
1”-1”
PWT20S
686
187
123
6.7
1”-1”
141 218
PWT30S
686
185
123
8.8
1”-1”
SBPWT50-ISO
PWT40S
686
185
169
12.2
1”-1”
PWT50S
686
185
169
15.6
1”-1”
PWT80S
672
168
168
22.4
1”-1”
SBPWT20
338
169
143
7.5
1”-5/4”
SBPWT50
574
169
189
16.4
1”-5/4”
SBPWT50
141 219
SBPWT20-ISO
141 220
SBPWTA
141 226
SBS20
141 403
SBS50
141 401
62
540.-
PWT30S
141 221
Flow volume in l/h
Up to 40 m2 collector surface area
570.-
141 215
10
435.-
Up to approx. 20 m2 collector surface
area
141 213
20
Up to 30 m2 collector surface area
PWT20S
141 209
S
PW
T3
0
20
PW
T
30S
PW
T
PWT
20S
Pressure loss in kPa
50
405.-
Low Flow: for stratified charging or tank to tank transfer
141 207
60
Up to 20 m2 collector surface area
Up to 20 m2 collector surface area
495.-
Up to 50 m2 collector surface area
975.-
Insulation for SBPWT20
140.-
Insulation for SBPWT50
140.-
Connection for SB plate heat
exchanger, 2 pcs, suitable for Cu 22
and Cu 28
50.-
Swimming pool set, up to 20 m2
collector surface area, consisting
of swimming pool heat exchanger
SBPWT20, pump set PS2570 and threeway set value control DWF25
1,360.-
Swimming pool set, up to 50 m2
collector surface area, consisting
of swimming pool heat exchanger
SBPWT50, pump set PS209 and threeway set value control DWF25
2,005.-
ACCESSORIES
flexible stainless steel pipes
Quick pipe laying for solar systems for indoor and outdoor usage. 2 corrugated
stainless steel pipes including sensor line, fully insulated in closed-cell rubber.
Solar
circuit
DN 16 stainless steel corrugated hose set,
10 lfm
285.-
EWSID16-15
DN 16 stainless steel corrugated hose set,
15 lfm
395.-
EWSID16-20
DN 16 stainless steel corrugated hose set,
20 lfm
540.-
EWSID16-50
DN 16 stainless steel corrugated hose set,
50 lfm
1,345.-
EWSID20-10
DN 20 stainless steel corrugated hose set,
10 lfm
325.-
EWSID20-15
DN 20 stainless steel corrugated hose set,
15 lfm
485.-
EWSID20-20
DN 20 stainless steel corrugated hose set,
20 lfm
640.-
EWSID20-50
DN 20 stainless steel corrugated hose set,
50 lfm
1,495.-
141 501
141 502
141 503
182 429
Collector connection set
or
ct
le
l
Co
EWSID16-10
141 504
141 505
Expansion tank
connection set
ASAG
141 506
182 430
Delivery time for EWSID16-50 and EWSID20-50 is 15 days
ASSKR500-16
DN 16 SKR500 connection set, transitions
to 2x1” female and 2x CU22
56.-
ASSKR500-20
DN 20 SKR500 connection set, transitions
to 2x1” female and 2x CU22
74.-
ASIDMK-16
DN 16 IDMK connection set, transitions to
2x1” male and 2x CU22
60.-
ASIDMK-20
DN 20 IDMK connection set, transitions to
2x1” male and 2x CU22
70.-
ASSK500-16
DN 16 SK500 connection set, transitions to
1” female/1” male and 2x CU22
58.-
ASSK500-20
DN 20 SK500 connection set, transitions
to 1” female/1” male and 2x CU22
75.-
DN 16 MAG connection set for expansion
tanks (AGS), transitions to 2 x 3/4” female,
1 x bow 3/4” female/male
20.-
DN 20 MAG connection set for expansion
tanks (AGS), transitions to 2 x 3/4” female,
1 x bow 3/4” female/male
20.-
EWSIDM16
Clamp set consisting of 4 oval pipe clamps,
anchors and bench screws for DN 16
25.-
EWSIDM20
Clamp set consisting of 4 oval pipe clamps,
anchors and bench screws for DN 20
25.-
EWSIDK-16
Coupling set consisting of 2 couplings DN
16 - DN 16 for extending EWSID16
45.-
EWSIDK-20
Coupling set consisting of 2 couplings DN
20 - DN 20 for extending EWSID20
60.-
ASCU16
Copper connection set: DN16 Cu22
connection (2 pieces)
50.-
141 592
Buffer tank with connection to
expansion tank and collectors
1
141 593
141 509
2
141 510
141 507
3
141 508
4
ASAG-16
141 511
ASAG-20
141 512
141 513
Dimensioning
EWSID: Maximum possible collector surface areas per collector field: (The
number of collectors can be increased by wiring the collector fields in
parallel.)
141 514
141 515
Ø
length
Collectors
DN 16
10 m
5 pcs.
DN 16
15 m
5 pcs.
SK500L-ECO-AL
DN 16
20 m
5 pcs.
(connected in series)
DN 20
10 m
6 pcs.
ASCU20
DN 20
15 m
6 pcs.
141 533
Copper connection set: DN20 Cu22
connection (2 pieces)
55.-
DN 20
20 m
6 pcs.
641 500 06
DN 16 x 22 mm cylindric joint
15.-
DN 16
10 m
4 pcs.
641 500 07
DN 20 x 22 mm cylindric joint
20.-
DN 16
15 m
4 pcs.
140 045
DN 16 x 1" female thread, flat sealing
20.-
DN 16
20 m
4 pcs.
DN 20
10 m
6 pcs.
140 041
DN 20 x 1" female thread, flat sealing
30.-
641 500 04
DN16 x 1" male thread, flat sealing
20.-
140 033
DN20 x 1" male thread, flat sealing
20.-
SKR500
(connected in parallel)
SK500N-ECO-AL
IDMK25
(connected in series)
DN 20
15 m
6 pcs.
DN 20
20 m
6 pcs.
Design data in the table are based on 30 l/m2/h, ST 20/6 pump, max. level,
water/FS antifreeze concentrate = 60 %/40 %, 40°C. 30 % of the regular
(straight) pressure loss is used to compensate the pressure loss in pipe
bends and 50 mbar for the solar station and tank.
2013 prices – all prices are indicated in GBP excluding VAT
141 516
141 532
63
Accessories
Accessories
ACCESSORIES
COMPONENTS
Antifreeze for flat plate collectors
Coll. surface area
Antifreeze for flat plate collectors
Antifreeze (l)
Propylene glycol, food safe and bio-degradable, with corrosion protection.
Concentrate for flat plate collectors, white, clear liquid.
2.5 m2
5
5 m2
10
7.5 m2
15
140 004
10 m2
20
FS10
2
15 m
25
30 m2
30
40 m2
35
FS05
140 005
FS200
140 021
Required concentrate volume when mixing 40 vol.-% AF with 60 vol.-%
water (up to n.a. 24°C) (Values apply for approx. 30 m Cu22)
5 l container
35.-
10 l container
70.-
200 l container
1,395.-
Expansion tanks
For solar hot and cooling water systems, max. operating pressure 10 bar, max.
operating temperature 70°C (at the membrane), wall mounting up to AG25S
included, AG33S with support bracket
AG8S
Capacity 8l, admission pressure 2,5
bar, connection 3/4“, male thread
37.-
AG18S
Capacity 18l, admission pressure 2,5
bar, connection 3/4“, male thread
53.-
AG25S
Capacity 25l, admission pressure 2,5
bar, connection 3/4“, male thread
63.-
AG33S
Capacity 33l, admission pressure 2,5
bar, connection 3/4“, male thread
85.-
AG50S
Capacity 50l, admission pressure 2,5
bar, connection 3/4“, male thread
145.-
AG80S
Capacity 80l, admission pressure
2,5 bar, connection 1“, male thread
185.-
AG100S
Capacity 100l, admission pressure
2,5 bar, connection 1“, male thread
230.-
AG140S
Capacity 140l, admission pressure
2,5 bar, connection 1“, male thread
435.-
AG200S
Capacity 200l, admission pressure
2,5 bar, connection 1“, male thread
560.-
AG300S
Capacity 300l, admission pressure
2,5 bar, connection 1“, male thread
610.-
AG500S
Capacity 500l, admission pressure
2,5 bar, connection 1“, male thread
1,800.-
141 321
Expansion tank information
ASG (exp. tank / VSG sizing) Flat plate collectors:
141 301
Up to coll. surface area
AGS
VSG
5 m2
18
6
7.5 m2
25
6
12.5 m2
33
12
15 m2
50
20
141 302
141 303
22.5 m2
80
20
30 m2
100
60
141 320
141 305
(Tab. applies for approx. 30 m Cu22 and ∆h = 5 - 15 m /pipe sizing according
to SONNENKRAFT manuals.) VSG are needed especially for low system
heights (<5m)
141 306
141 322
141 307
141 308
Professional equipment
KP
141 603
FSP
141 601
PHMS
141 602
PMM
141 604
FPE
141 606
PRKO
141 605
TGSK
141 607
TGSKR-E
141 629
MSSK500
141 608
64
Compass with inclination angle
meter
110.-
Antifreeze tester for propylene glycol
155.-
Litmus stripes for pH between 4
and 10 (for checking older systems),
100 pcs.
30.-
Test manometer for expansion tank
80.-
141 314
MAG connection, corrugated
MAGAS-1500 stainless steel pipe, uninsulated,
141 531
length 1,5m, connection 3/4“,
female thread
20.-
KVAG20
Cap valve 3/4“ female, testing or
emptying
35.-
KVAG25
Cap valve 1“ female, testing or
emptying
45.-
140 011
140 012
Solar system intermediate tank
Filling pump with barrel, hose and
pressure pump, 230 V, 50 m delivery
head
800.-
VSG6
Intermediate tank 6 l,
connection 3/4“ male
49.-
Test kit for solar power system
maintenance
450.-
VSG12
Intermediate tank 12 l,
connection 3/4“ male
65.-
Collector strap for SK500
135.-
VSG20
Intermediate tank 20 l,
connection 3/4“ male
85.-
Collector strap for SKR500
80.-
VSG60
Intermediate tank 60 l,
connection 3/4“ male
175.-
Installation wrench for SK500
10.-
VSG200
Intermediate tank 200 l,
connection DN 40
870.-
141 315
141 316
141 317
141 318
141 319
ACCESSORIES
components
Accessories
TBM20
Thermostatic domestic water
mixer 3/4“, incl. backflow inhibitor
65.-
TBM25
Thermostatic domestic water
mixer 1“, incl. backflow inhibitor
150.-
120 013
EHP25
120 001
EHP45
120 002
EHP6
120 003
EHP9
120 004
2,5kW, 230V or 400V, 390 mm fitting
length
255.-
4,5kW, 400V, 470 mm fitting length
285.-
6.0kW, 400V, 620 mm fitting length
305.-
9.0kW, 400V, 780 mm fitting length
330.-
120 014
Solar flow volume meter
DMS20
130 005
DMS25
Electrical heating information
130 006
EHP25










EHP45










EHP6








EHP9






DMS20-HT
130 336
DMS25-HT
PS5000E
PS3000E
PS1500/2000E
PS800/1000E
PSC800/1000E
PSR800/1000E
PSR500E
DHW750/1000R2E
DHW300/400/
500PR2E
DHW200PR2E
EHP
TANK
Selecting the electrical cartridge: Using a 2,5kW cartridge, approx. 100 l water
can be heated in approx. 1,5 hrs from 10° up to 40°C. Observe local connection
regulations. The electrical cartridges are only intended for auxiliary heating and
horizontal installation (not for continuous operation).
130 337
DWV20
130 007
130 008
Stainless steel corrugated pipe, insulated
DWV32
Stainless steel corrugated pipe with 1” female/1” male thread screw
connections allows solder free and flexible pipe laying into the house and
accommodates heat expansion.
Corrugated connector hose;
50 cm long
30.-
IWS100
Corrugated connector hose;
100 cm long
40.-
IWS300
Corrugated connector hose;
300 cm long
80.-
141 520
141 521
141 522
SSD
140 009
Silicone roof inlet up to Ø 35 mm,
EPDM pipe sleeve with fastening
flange on roof side
130 449
ETI22
Air vent 22 mm, weatherproof
insulated
67.-
ETI28
Air vent 28 mm, weatherproof
insulated
74.-
140 002
140 003
2013 prices – all prices are indicated in GBP excluding VAT
225.-
Flow volume meter for high
temperatur applications, 1” female
thread, 10-40 l/min (~30-120m2 coll.
area), max. 185°C (long term) or
195°C (short term)
235.-
3-way motor valve 3/4” female
thread
90.-
3-way motor valve 1” female thread
95.-
3-way motor operated valve 5/4”,
incl. electric actuator
480.-
3-way distributor valve 3/4”
incl. actuator
220.-
DWF25
3-way distributor valve 1”
incl. actuator
250.-
DWF32
3-way fixed-value controller 5/4”,
incl. drive and 2 m capillary tube
620.-
Sealing disc for bench screw ø12
mounting sytems on sheet metal
roofing
5.-
130 088
67.-
Flow volume meter for high
temperatur applications, 3/4” female
thread, 2-12 l/min (~30m2 coll. area),
max. 185°C (long term) or 195°C
(short term)
DWF20
130 009
Air vents
140 001
185.-
Can be set between 40°C and 70°C for limiting temperature, incl. thermal
actuator and capillary tube. Install according to instructions.
130 010
Air vent 18 mm, weatherproof
insulated
Flow volume meter 1” female thread,
10-40 l/min (~30-120m2 coll. area),
max 130°C
Three-way set-value control
25.-
ETI18
180.-
Motor valves with spring return 230V
DWV25
IWS50
Flow volume meter 3/4” female
thread, 2-12 l/min (~30m2 coll. area),
max. 130°C
VARIOUS
SS12350-DS
182 101
65
Accessories
Electrical heating cartridges
Immersion heater with 6/4“ male thread use only for secondary heating
what it does
The COMPACT Power solutions from SONNENKRAFT® use
the energy of the sun to generate electricity for domestic
use. Solar electricity is technically named photovoltaic.
Depending on local regulations, if more electricity is produced
than needed, it may be sent into the grid and sold to energy
suppliers.
How it works
The sun hits the photovoltaic cells and generates electricity. The
electricity runs through cable to an inverter that converts from
DC to AC and now its ready to use.
the Improvement
Economic
The CoMPACT Power solutions enable the production of the
total electricity demand for free. Furthermore, in some cases,
surplus electricity may be sold back to the energy supplier’s
grid and you earn money every day.
Environmental
90 % of the worlds electricity is produced by combustion of
fossil fuels, which is considered to be the largest contributing
factor to the release of greenhouse gases into the atmosphere. That is why governments in almost every country have
set up aggressive goals to reduce carbon dioxide emission.
Using solar energy emits zero carbon dioxide.
Independency
oil and gas are scarce resources that will run out of over time.
The future price is highly uncertain. During the last 10 years
the oil price has increased by 300 %. Using as much solar
energy as possible reduces the user's dependency on other
energy sources, and so removes the worry about increasing
fossil fuel prices and future scarce supply.
66
solar electricity
Benefits
• Produce electricity for free and earn
money on surplus electricity
• Appealing up-market design thanks to
colour co-ordinated components
• Easy to install and very low maintenance
the solution
COMPACT POWER
SOLAR ELECTRICTY
The SONNENKRAFT® COMPACT Power is an easily
installed photovoltaic solution consisting of solar cells
on your roof and an inverter for connection to the
power grid.
COMPACT Power
2013 prices – all prices are indicated in GBP excluding VAT
67
solar Electricity
COMPACT POWER
PV – Photovoltaic – is the most effective way of generating electricity from the sun. A PV-solution from
SONNENKRAFT® ensures a low maintenance installation and the option of rebate from your power supplier.
Functional diagram
COMPACT Power
e
ul
od
-m
PV
DC
isolator
Power Grid
Inverter
68
Electrical
box
Utility
Co. meter
Appealing up-market module
design
UNIQUE GLASS STRUCTURE
Modern and unique design which fits to every home because of
colour co-ordinated high quality black solar cells and mounting
systems.
The rare structured glass surface is designed for maximum
efficiency. It has a higher absorbance, reduced reflection and
less dust collection, giving a yearly efficiency 3% higher than
standard photovoltaic glass.
Compact power solutions
Number of photovoltaic
modules BLACK PEARL
Module area
1.96 kWp
2.94 kWp
3.92 kWp
4.9 kWp
5.88 kWp
7.84 kWp
9.8 kWp
11.76 kWp
Pcs.
8
12
16
20
24
32
40
48
m2
13.12
19.68
26.24
32.8
39.36
52.48
65.6
78.72
850221
850225
850229
850223
850227
850231
Standard sets WITH mounting system (AT, DE, DK, CH)
Roof bracket parallel DBP
£
Item no.
Bench srew parallel SSP
Prices on request
850201
850205
850209
£
Item no.
850213
850217
Prices on request
850203
850207
850211
850215
850219
850245
850249
Standard sets WITH mounting system (IT)
Roof bracket parallel DBP
£
Item no.
Bench srew parallel SSP
Prices on request
850233
850237
£
Item no.
850241
Prices on request
850235
850239
850243
850247
850251
Inverter*
4
4
4
4
4
4
4
4
DC-Box (pre-mounted)
4
4
4
4
4
4
4
4
AC-Box (pre-mounted)
4
4
4
4
4
4
4
4
Full engineering/designing
package**
4
4
4
4
4
4
4
4
Set components
ADDITIONAL PRODUCTS - 100 m DC cable 6 mm2 (821 217) - x,xxx.-, Pair of MC4 connectors (male + female) (821 222) - x,xxx.-, Datalogger - on request
*) AT, DE, DK, CH: Fronius, Danfoss or PowerOne / IT: PowerOne
**) IT: incl. package ENEL/GSE
Note: The table shows standard solutions. Customized solutions are also available, e.g. for flat roofs, specific mounting configurations or
higher snow/wind loads. Further sets for above not mentioned markets are also available on request!
Powered by:
Long lasting warranty
The COMPACT POWER solutions are delivered with the most
complete planner package. Our highly experienced engineers
will take all thinkable variables of the placement of the installation into consideration, and thereby ensuring the highest
possible efficiency and earnings.
The warranty on the actual products is no less than 10 years, and
the warranty on the performance of the panels reaches 25 years.
SOLAR ELECTRICTY
Professional planning
100%
included:
• System report
• Installation plan
• Mounting manual
• Electrical schemes
• CE certificates
all on paper and CD
90%
80%
SONNENKRAFT performance guarantee
0%
2013 prices – all prices are indicated in GBP excluding VAT
0 1
5
10
15
20
25
69
PV-module
Black pearl 245 wp
The BLACK PEARL 245 WP is SONNENKRAFTs brand new photovoltaic module. Its
features are the modern and unique design that fits every home and its outstanding
efficiency.
High
quality
HIGH
EFFICIENCY
Tight
sealing
The PV-module is made of
the highest quality industrial
components and this ensure
life-long durability.
The optimised surface pattern of the glass ensures an
increased yield of 3% per year.
Special developed film ensures
optimum protection against
moisture penetration.
POWER SPECIFICATIONS
PERFORMANCE
Rated power at STC1
245 Wp
60 polycrystalline cells
156 mm x 156 mm
Type
Black Pearl 245 WP
Pmpp[Wp]
245 Wp
26.47 V
Connection system
MC4/LC4
Umpp[wP]
Max. system voltage
1000 V DC
Impp[A]
6.77 A
Pmpp = -0.47 %/K
Uoc = -0.36 %/K
Isc = 0.02%/K
Uoc[V]
33.48 V
Temperature coefficient
Isc[A]
7.13 A
Standard test conditions
AM 1,5 / 1000 W per m2 / 25° C
Efficiency
14.9 %
Space per kWp
6.7 m2
Ambient temperature
-40°C to + 85°C
Cable length
1000 mm
Bypass diodes
Performance guarantee
3 pcs.
90 % up to 10 years and 80 % up to 25
years
Product warranty
10 years
The measurement tolerance of the rated power is ± 3 %.
The modules delivered are sorted in a range of ± 2.5 Wp.
1)
8 vent holes
ø 4 mm
name plate
PRODUCT SPECIFICATIONS
Dimensions with aluminum
frame
Cell manufacturer
Weight
Glass specifications
Encapsulation material
Bosch, Germany
21 kg
cable length
1000 mm
EVA (Solutia Solar)
composite film, black (Krempel/Isovolta)
Test certificate
IEC 61215 Ed. 2 & IEC 61730; ISO 9001 &
ISO 14001; MCS and CEC accredited
Ammonia resistance
6 mounting holes
8 x 16 mm
4 mm Albarino P (Saint-Gobain Solar)
Back material
Enhanced hail test
70
1660 mm x 990 mm x 50 mm (+/-2 mm)
Hailstone size 24 mm,
maximum speed o
​ f 83km/h
1500 h - 70°C, 70 % relative humidity
and 750 ppm of ammonia concentration
6 grounding holes
ø 4 mm
4 drain holes
ø 5 mm
distance of mounting holes
COMPARISON OF MODULE CAPACITIES
Fits with following System solutions
COMPACT E
(Source: Evaluation of yield of patterned front glass, ISFH report Mak230209-2, July 2009)
SOL+
Two thirds of a household's energy demand is typically for hot
water and heating, for which our solar thermal solutions are
optimal. The remaining one third is for electricity, which is
why a solar thermal solution may very well be combined with
a photovoltaic solution. The COMPACT POWER is combineable
with any of SONNENKRAFT's solutions for hot water and
heating.
SOLAR ELECTRICTY
The chart illustrates the relationship between capacity increase and
installation angle of a module. It is clearly evident that the Black
Pearl module produces at an installation angle of 10° the same
output as a reference module at an angle of 30°. At an installation
angle of 30°, the capacity of the Black Pearl module is considerably
higher than 100 % of the reference output.
COMFORT E Plus
COMFORT E
2013 prices – all prices are indicated in GBP excluding VAT
71
Notes
72
TERMS &
CONDITIONS
2013 prices – all prices are indicated in GBP excluding VAT
73
terms and conditions of sale
1.Interpretation
(I) “Company” means Sonnenkraft Solar Systems Limited.
(II)“Buyer” means the person or firm who purchases the Goods from the
Company.
(III) “Contract” means the contract between the Company and the Buyer for
the sale and purchase of the Goods.
(IV) “Goods” means the goods or any part of them agreed to be supplied on
the face of the quotation or order acknowledgement.
(V)“Intellectual Property Rights” means all vested, contingent and future
intellectual property rights including but not limited to copyright, trade
marks, service marks, design rights (whether registered or unregistered),
patents, know-how, trade secrets, inventions, get-up, database rights and any
applications or registrations for the protection of these rights and all renewals
and extensions thereof existing in any part of the world whether now known or
in the future.
2.Contract
(I) All quotations given and all Contracts made by the Company are subject
to the terms and conditions contained herein and all terms and conditions
referred to by the Buyer or contained in any order, acceptance of quotation or
otherwise brought to the notice of the Company are hereby excluded. These
terms and conditions may be varied only by agreement in writing between
the parties. Accordingly these terms and conditions constitute (together
with the contractual documents to which they are attached or relate) the
whole agreement between the parties and supersede any prior promises,
representations, undertakings or implications.
(II)No servant or agent of the Company has any authority to make any
representation or give any warranty in relation to the Goods or the materials
to be used in the manufacture of the Goods, or to agree to any variation or
addition to these terms and conditions, unless such representation, warranty,
variation or addition is expressed in writing and signed on behalf of the
Company by an authorised representative of the Company.
(III) All orders placed with the Company require written acceptance before
any Contract arises.
3.Validity
Unless previously withdrawn a quotation is valid only for the period stated,
or when no period is stated, for a period of 20 days only after the date of the
quotation.
4.Price
(I) The price of the Goods shall be the price set out in the order
acknowledgement, or if no price is quoted, the price set out in the Company’s
published price list in force as at the date of delivery.
(II)The price of the Goods is exclusive of Value Added Tax which is payable by
the Buyer.
(III) Unless otherwise stated in the quotation or order acknowledgement, the
price of the Goods is exclusive of the costs and charges of packaging, insurance
and transport of the Goods, which shall be invoiced to the Buyer.
5.Payment
(I) The Company may invoice the Buyer for the Goods on or at any time after
the completion of delivery.
(II)Unless otherwise stated in the quotation or order acknowledgement, the
Buyer shall pay the invoice in full and in cleared funds within 30 days running
from the end of the month the invoice was dated. Payment shall be made to
the bank account nominated in writing by the Company. Time for payment of
the price shall be of the essence of the Contract.
(III) Where payment is delayed beyond the date specified for payment in
sub-clause (II) of this clause, the Buyer shall pay compound interest on any
sums remaining unpaid at the rate of 4% above base rate of HSBC Bank Plc for
the time being from the date so specified for payment until the date of actual
payment. The Buyer shall pay the interest together with the overdue amount.
6.Delivery
(I) The Company shall deliver the Goods to the location set out in the order
acknowledgement or such other location as the parties may agree at any
time after the Company notifies that the Goods are ready. Delivery shall be
completed on the Goods’ arrival at the relevant location. The Buyer shall make
all necessary arrangements to take delivery of the Goods whenever they are
tendered for delivery, including arrangements for unloading the Goods from the
delivery vehicle.
(II)The Company may deliver the Goods ordered by instalments, which may be
invoiced and paid for separately. Each instalment shall be a separate contract
and no cancellation or termination by either party of any one Contract relating
to an instalment shall entitle the Buyer to cancel or repudiate any other
Contract or instalment.
(III) Whilst every effort is made to ensure that the Goods are delivered on the
due date, the Company shall not be liable for any delays in delivery which may
occur. The Company may at any time give notice of revised delivery dates.
(IV) If the Company is unable by reason of the Buyer’s instructions or lack
of instructions to effect delivery of the Goods within 14 days of notification by
74
the Company that the Goods are ready, the Buyer shall pay to the Company
such sums of money as may be due under the terms of the Contract upon
presentation of invoices.
(V)The Company shall be responsible for any damage, shortage or loss in
transit, provided that the Buyer notifies it to the Company (or its carrier, if
applicable) within 3 days of delivery or the proposed delivery date of the Goods
and that the Goods had been handled in accordance with the Company‘s
stipulations. Any remedy under this sub-clause shall be limited, at the option of
the Company, to the replacement or repair of any Goods which is proven to the
Company‘s satisfaction to have been lost or damaged in transit.
(VI) No contract between the Company and the Buyer shall be a sale by
sample.
7.Storage
The Company shall be entitled to store any or all of the Goods at its own
premises or elsewhere if the Buyer fails to take delivery:
(a)at the time specified therefor; or
(b)at the time when delivery shall be deemed to have been made; and the
Company shall also be entitled to charge the Buyer for all related costs and
expenses (including insurance).
8.Defects
(I) For products which bear the Sonnenkraft trade mark, the Company grants
the following warranty: the Company will make good by repair or, at its own
discretion, by the supply of a replacement, defects which under proper use
appear within 5 years from the date of delivery in the case of Goods consisting
of solar collectors and tanks (with the exception of collector accessories) and 2
years from the date of delivery in the case of all other Goods. Defective Goods
shall be promptly returned to the Company’s works at the Buyer’s expense
unless otherwise agreed. The repaired or replacement Goods will be delivered
by the Company free of charge and the said Goods will have the benefit of the
unexpired portion of the warranty period aforementioned.
(II)The Company’s obligations and liability for defective Goods under sub-clause
(I) of this clause are subject to:
(a) the Buyer showing to the Company’s reasonable satisfaction that the
defect is solely attributable to faulty design, materials and/or workmanship;
(b) following delivery, the Goods not having been misused or subjected
to neglect, improper or inadequate care, carelessness or abnormal usage
conditions or involved in any accident, repair, replacement, servicing or
modifications contrary to the instructions of the Company;
(c) following delivery, in the case of Goods consisting of solar collectors, the
defect not being the result of mechanical stress and/or alterations due to
weather conditions or minor colour deviations and/or surface impairments
which have no economically relevant influence on the solar collector’s
functions;
(d) following delivery, in the case of Goods consisting of tanks, the defect
not being the result of lime deposits, corrosion caused by creepage current or
oxygen diffusion; and
(e)the Buyer allowing the Company the opportunity to examine the Goods.
(III) Alternatively to sub-clause (I) of this clause, the Company shall be
entitled at its absolute discretion to refund the price of the defective Goods
in the event that such price shall have already been paid by the Buyer to the
Company, or, if such price has not been so paid, to relieve the Buyer of all
obligation to pay the same by the issue of a credit note in favour of the Buyer in
the amount of such price.
(IV) The foregoing is the full extent of the Company’s liability hereunder and
otherwise (including but not limited to negligence) in connection with or arising
from defects in the Goods.
(V)Any replacement of Goods due to them being defective shall not constitute
late delivery.
9.Intellectual Property
The Company’s Intellectual Property Rights in and relating to the Goods shall
remain the exclusive property of the Company, and the Buyer shall not at any
time make any unauthorised use of such Intellectual Property Rights, nor
authorise or permit any of its agents or contractors or any other person to do
so.
10.Cancellation
The Buyer shall not be entitled to cancel the Contract without the prior written
consent of the Company and then only upon such terms as the Company may
require by way of indemnity or compensation for any loss (including loss of
profit), damage, cost or expense which the Company may have suffered by
reason of such cancellation. Without prejudice to the foregoing, in the event of
cancellation by the Buyer of any Contract for Goods specifically manufactured
by the Company to individual specifications and not marketed by the Company
as standard lines, the Company shall be entitled to charge for all expenses
incurred in preparation for the manufacture of such Goods.
11.Specifications
(I) All information including that relating to performance facts, drawings,
dimensions, photographs and the like is to be regarded as a general guide only
and constitutes no guarantee of accuracy from the Company, unless specifically
confirmed in writing by the Company at the time of placing the order.
(II)Suggestions, recommendations, drawings, specifications
and documents supplied in connection with quotations or Contracts and all
rights in relation thereto are the property of the Company and are returnable
forthwith on demand at the Buyer’s expense and may not be disclosed to a third
party without the prior written authority of the Company.
(III) The Buyer assumes responsibility for the capacity and performance
of the Goods being sufficient and suitable for his purpose. Furthermore, all
recommendations and advice given by or on behalf of the Company as to the
quality and/or suitability for any particular purpose are given without any
liability whatsoever on the part of the Company, its servants or agents.
12.Passing of risk
Risk shall pass to the Buyer upon delivery or deemed delivery of the Goods
at the Company’s premises or such other place of delivery as may be agreed
notwithstanding that the property in the Goods may not have passed to the
Buyer.
13.Title
Until the Company has received payment in full of all sums owing or due to
the Company in respect of the Goods, the Buyer holds the Goods in a fiduciary
capacity as bailee for the Company and:
(a)legal and beneficial title in the Goods shall remain with the Company and the
Company may require the Buyer to store the Goods in such a way that they are
clearly marked as the property of the Company and to maintain full insurance
cover against loss or damage in respect thereof;
(b)the Company reserves the right of disposal of each item of the Goods and
may retake possession thereof at any time and for that purpose its servants or
agents may enter upon any land or premises occupied by the Buyer;
(c)the Buyer undertakes in relation to the Goods not to remove parts, add
to, modify or otherwise do any work on such Goods without the prior written
permission of the Company;
(d)notify the Company immediately if it becomes subject to the event specified
in clause 16(a) or (b); and
(e) give the Company such information relating to the Goods as the
Company may require from time to time.
14.Liability
(I) Nothing in these terms and conditions shall limit or exclude the Company‘s
liability for:
(a) death or personal injury caused by its negligence, or the negligence of its
employees, agents or subcontractors (as applicable);
(b) fraud or fraudulent misrepresentation;
(c) breach of the terms implied by section 12 of the Sale of Goods Act 1979;
(d) defective products under the Consumer Protection Act 1987.
(II) Subject to sub-clause (I) of this clause, the Company hereby excludes
liability for all or any representations, terms, conditions or warranties, whether
express or implied, relating to the Goods and without prejudice to the foregoing,
limits the extent of any liability which it may be under to repaying the invoice
price received for the Goods that are the subject of the Contract. In no event
shall the Company be liable whether in contract, tort (including negligence),
breach of statutory duty, or otherwise, for any loss of profit, or any indirect,
special or consequential loss arising under or in connection with the Contract.
15.Force Majeure
(I) The Company shall not be liable for any loss or damage whatsoever caused
by delay in the performance or the non performance of any of its obligations
under this Contract where the delay is due to any cause beyond the Company’s
control. In such event the Company may terminate or suspend this Contract
with no liability for loss or damage thereby occasioned.
(II)The following shall, without prejudice to the generality of the above, be
considered causes beyond the Company’s control:
Act of God; war or threat of war; sabotage; insurrection; civil disturbance;
requisition; governmental or Parliamentary restriction; prohibitions or
enactments of any kind; import or export regulations; strikes; lock-outs; trade
disputes (whether involving employees of the Company or another); difficulties
in obtaining labour, fuel, materials, machinery, information, data or know-how;
breakdown in machinery; fire or accident; inadequate or defective instruction
from the Buyer; defaults of the Buyer or any third party.
(c)the Buyer commits any material breach of its obligations hereunder.
17.Statutory Rights
If the Buyer is deemed by law to be dealing as a consumer, his statutory rights
are in no way to be adversely affected by these terms and conditions.
18.Severance
(I) If any court or competent authority finds that any provision of the Contract
(or part of any provision) is invalid, illegal or unenforceable, that provision or
part-provision shall, to the extent required, be deemed to be deleted, and the
validity and enforceability of the other provisions of the Contract shall not be
affected.
(II) If any invalid, unenforceable or illegal provision of the Contract would
be valid, enforceable and legal if some part of it were deleted, the provision
shall apply with the minimum modification necessary to make it legal, valid and
enforceable.
19.Assignment and Sub-contracting
(I) The Company may at any time assign, transfer, charge, subcontract or
deal in any other manner with all or any of its rights or obligations under the
Contract.
(II) The Buyer may not assign, transfer, charge, subcontract or deal in any
other manner with all or any of its rights or obligations under the Contract
without the prior written consent of the Company.
20.Third Parties
A person who is not a party to the Contract shall not have any rights under or in
connection with it.
21.Waiver
Failure by the Company to insist upon strict performance of the terms and
conditions of this Contract shall not be deemed a waiver of any subsequent
default hereof.
22.Law and Jurisdiction
The Contract shall be governed by and construed in accordance with English
law and the parties irrevocably agree that the English Courts are to have
jurisdiction to settle any dispute arising out of or in connection with this
Contract, save that the Company shall be entitled at its sole discretion to refer
such disputes to the Court of any jurisdiction in which the Buyer carries or has
carried on business.
23.Notice
(I) Any notice given to a party under this Contract shall be in writing, addressed
to that party at its registered or principal office, and shall be delivered
personally, sent by pre-paid first class post, recorded delivery, commercial
courier, fax or e-mail.
(II)A notice shall be deemed to have been received: if delivered personally,
when left at the address referred to above; if sent by pre-paid first class post
or recorded delivery, at 9.00 am on the fifth day after posting; if delivered by
commercial courier, on the date and at the time that the courier‘s delivery
receipt is signed; or, if sent by fax or e-mail, one day after transmission.
Prices valid from January 1, 2013, all other pricelists lose validity from that
date. Price in £ excluding VAT. Prices subject to change (prices without
indication of quantity are prices per piece). Subject to technical changes!
Figures and illustrations used as examples. Formatting and printing errors
might occur. Range of products is not binding.
2013 prices – all prices are indicated in GBP excluding VAT
TERMS &
CONDITIONS
16.Termination
Without prejudice to any other rights which the Company may have, the
Company shall be entitled on giving written notice to the Buyer to determine
this Contract summarily, demand immediate payment of any amount due or
accruing to the Company thereunder and to retain any deposits, if any of the
following circumstances occur:
(a)the Buyer, not being a body corporate, becomes bankrupt or compounds or
makes any arrangement with his creditors or commits any act of bankruptcy;
(b)the Buyer, being a body corporate, goes into liquidation whether compulsory
or voluntary (save for the purpose of amalgamation or reconstruction) or has a
receiver appointed of its undertaking or assets or any part thereof; or
75
Residential
Commercial
Industrial
We have the widest
assortment of solutions for
your house or swimming pool
We have extensive
experience in developing
individual solutions for
hotels, schools, apartment
buildings, hospitals, etc.
We have provided more than
50 % of all solar heating
installations over 1000 m2 in
Europe.
Now you are enlightened,
It’s time to be smart
Get information
At SONNENKRAFT we offer a wide range of publications to keep you well
informed about our products and the development within the solar energy area.
Please browse through the different brochures to find out which one suits your
need best.
Service & Support
SONNENKRAFT offers service and support all over Europe. To find your local
SONNENKRAFT partner please go to www.sonnenkraft.com and select your
country or region.
Prices subject to change (prices without indication of quantity are prices per piece).
Subject to technical changes! Figures and illustrations used as examples. Formatting
and printing errors might occur. Range of products is not binding.
SOLAR ENERGY MADE BRIGHTER
SONNENKRAFT Solar Systems Ltd • Shakespeare House • 42 Newmarket Road, CAMBRIDGE • CB5 8EP
Phone: +44 (0) 1778 440 148 • Email: [email protected]
UK-SK-0327-1211-IN © 2013 SONNENKRAFT Solar Systems Limited • SONNENKRAFT and the SONNENKRAFT logo are trademarks owned by VKR Holding A/S
SONNENKRAFT® is one of the leading solar energy experts in Europe. We offer solutions that can provide hot water,
room heating and electricity for any need, from individual homes to large solar parks.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement