Pulsar PSBSEP series power supply unit PSBSEP 04124 EN*

Pulsar PSBSEP series power supply unit PSBSEP 04124 EN*
Pulsar
PSBSEP series power supply unit
®
Buffer swiched-mode power supply 12-18VDC
PSBSEP 04124
v.1.1/III
PSBSEP 12-18V/4x1A/2x7Ah/SEP buffer
stwitched mode power supply for CCTV
EN*
H
CODE:
TYPE:
W
D
Features:
· 4 independently adjustable delivery channels for
uninterruptible power supply in the range of
12 ÷ 18VDC/4x1A
· battery housing: 2x7Ah/12V
· 4 overvoltage protection OVP circuits, separate for
each channel, 15V/18V/21V, jumper selectable
· supply voltage 230VAC
· high efficiency 70%
· separate battery charging circuit independent of
preset output voltages
· battery charging and maintenance control
· deep discharge battery protection (UVP)
· battery output protection against short circuit and
reverse connection
· battery charging current 0,2A/0,5A, jumper
selectable
START battery activation button
LED optical indication
FAC technical output indicating AC power
loss
· FLB technical output indicating low battery
voltage
· FPS technical output indicating PSU failure
· the possibility of installing 4-channel
MSEP412 or MSEP412V video module to
Yap type cables
· protections:
· SCP short-circuit protection
· OLP overload protection
· OVP overvoltage protection
· Surge protection
· Antisabotage protection
· warranty – 5 year from the production date
·
·
·
DESCRIPTION
The buffer power supply is intended for uninterrupted supply of CCTV systems requiring stabilized voltage
of 12V DC (+/-15%). The PSU features 4 independently adjustable channels for power supply in the range of
4x12÷18VDC/4x1A. This enables compensation of voltage drops in complex CCTV systems. The current efficiency
of the PSU is:
1. Output current 4 x 1A + 0,2A battery charge
2. Output current 4 x 1A + 0,5A battery charge
Total current of the receivers + battery: 4,5A max.
In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a
metal casing (color: RAL 9003) with battery housing for two 7Ah/12V batteries. The enclosure is fitted with a
microswitch indicating door opening (at the front). The enclosure of the PSU design allows mounting 4-channel
MSEP412 or MSEP412V video module, fitted with Yap cable connection sockets (coaxial cable integrated with the
power supply).
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]
Pulsar
PSBSEP series power supply unit
Buffer swiched-mode power supply 12-18VDC
PSU type
Mains supply
Current consumption
Power frequency
PSU power
Output voltage
Output current
PSU power
Output voltage escalation, decrease,
and keeping time
Voltage adjustment range
Ripple voltage
Current drawn by the PSU module
systems
Battery charging current
Short-circuit protection SCP
Overload protection OLP
Over voltage protection OVP
Battery circuit protection SCP and reverse
polarity connection
Deep discharge battery protection UVP
Surge protection
Tamper resistance:
- TAMPER outlet indicating opening of
the enclosure
Technical outputs:
- FAC; output indicating AC power failure
- FLB; output indicating
- FPS; technical output indicating PSU
operating status
A (EPS – External Power Source)
230 VAC (-15%/+10%)
0,[email protected] AC max.
50Hz
60W max.
70%
4 x 12V÷18V each outputs adjusted separately
4 x 1A + 0,2A battery charge or
4 x 1A + 0,5A battery charge
2ms / 20ms / 60ms
12÷18V DC all outputs adjusted separately
50 mV p-p max.
85 mA – battery-assisted operation
0,2A/0,5A IBAT jumper selectable
200% ÷ 250% of PSU module power - current limitation by a fuse
(fuse-element replacement required)
110% ÷ 150% (@25ºC) of PSU module power - current limitation
with the fuse/PTC, manual restart (failure requires disconnection
of the DC output circuit)
15V/18V/21V –selected by the ”OVP” jumper, independently for
each channel
4A - current limitation, FBAT fuse (failure requires fuse-element
replacement)
<20V (± 5%) – disconnection of the battery terminal
4 x varistors
- microswitch, NC contacts (enclosure closed),
0,[email protected] DC (max.)
- OC type, 50mA max., normal status: L (0V) level, failure: hi-Z
level (automatic return after restoration of correct operation)
- R type – relay, [email protected] 30Vdc/50Vac max.
time lag, approx. 5s/140s/17min/2h20m (+/-5%)
- OC type, 50mA max. normal status: L (0V) level, failure: hi-Z
level, VBAT < 23V
- OC type, 50mA max. normal status: L (0V) level, failure: hi-Z
LED indication
Enclosure
(automatic return after restoration of correct operation)
YES – LEDs
Steel plate, DC0, 0,8mm thick, RAL9003, IP20
o
o
Operating conditions
2nd environmental class, temperature: -10 C÷40 C, relative humidity
20%...90%, without condensation
Dimensions
Net/gross weight
Fitting battery
Connectors
345 x 322 x 116 mm (WxHxD)
Closing
Declarations, warranty
Cheese head screw x2 (at the front)
CE, RoHS, 5 year from the production date
Notes
The enclosure does not adjoin the assembly surface so that
cables can be led.
Convectional cooling.
5,12 /5,36 kg
2x7Ah/12V (SLA)
Power supply: Φ0,41-2,5
Outputs: Ф0,41÷2,5
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]
®
Pulsar
PSBSEP series power supply unit
Buffer swiched-mode power supply 12-18VDC
PSBSEP04124 PSU configuration with the use of
MSEP412 4-channel video module featuring
proper connection outlets for the Yap leads (coax cable).
-IN1+
-IN3+
-IN2+
L1
L2
- +
Video1_pwr
1
Video1_out Video1_in
-IN3+
2
-IN3+
L3
- +
Video2_pwr
Video2_out Video2_in
-IN4+
L4
- +
Video3_pwr
3
Video3_out Video3_in
- +
Video4_pwr
DC
4
Video4_out Video4_in
-IN1+
- +
Video1_pwr
Video1_out Video1_in
VIDEO
1
PWR+VIDEO
VIDEO
RECORDER
CAM
PSBSEP04124 PSU configuration with the use of
MSEP412V 4-channel video module featuring
proper connection outlets for the Yap leads (coax cable).
IN1
L1
OUT1
L3
L2
1
IN4
IN3
IN2
2
OUT2
3
OUT3
OUT4
VIDEO
IN1
VIDEO
RECORDER
PWR+VIDEO
CAM
OUT1
DC
L4
1
OUT1
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]
4
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement