SINE_HP_48_Manual_GB
TERRATEC PRODUCER/SINE HP 48
English Manual
Version 1.0, last revised: November 2003
CE Declaration
We:
TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany
hereby declare that the product:
TerraTec Producer SINE HP 48,
to which this declaration refers is in compliance with the following standards or
standardizing documents:
1. EN 55013
2. EN 55020
The following are the stipulated operating and environmental conditions for said
compliance:
residential, business and commercial environments and small-company environments.
This declaration is based on:
Test report(s) of the EMC testing laboratory
The information in this document is subject to change without notice and shall not be deemed as a
warranty by the seller. No warranties, express or implied, are made with regard to the quality,
suitability or accuracy of this document. The manufacturer reserves the right to change the contents
of this document and/or the associated products at any time without the provision of prior notice to
specific persons or organizations. The manufacturer shall not be held liable for damages of any
kind arising from the use, or the inability to use this product or its documentation, even if the
possibility of such damage is known. The information in this document is subject to copyright. All
rights are reserved. No part of this manual may be reproduced or transmitted in any form or for any
purpose without the express written permission of the copyright holders. Product and brand names
contained in this document are used for identification purposes only. All registered trademarks,
product designations or brand names used in this document are the registered property of their
respective owners.
®
©TerraTec Electronic GmbH, 1994-2003. All rights reserved (12.11.03).
2
SINE HP 48 (English)
Contents
Important safety information........................................................................................ 4
Welcome! ....................................................................................................................... 5
Scope of delivery........................................................................................................... 5
Connections and controls ............................................................................................ 6
The front panel: ........................................................................................................... 6
The rear panel: ............................................................................................................ 6
Function......................................................................................................................... 7
Technical data ............................................................................................................... 9
Service at TerraTec Producer..................................................................................... 10
Internet, Hotline ......................................................................................................... 10
SINE HP 48 (English)
3
Important safety information
n Please read all instructions before using this device.
n Never use the device near water, i.e. next to a bathtub, sink, or drain, in a damp
basement or near a swimming pool.
n Used in combination with an amplifier and headphones or speakers, this device can
cause sound levels that may result in lasting hearing damage. Avoid long exposure to
excessive or unpleasantly high volume levels. Consult an ear specialist immediately if
you detect a loss of hearing or a ringing in your ears.
n Ensure adequate ventilation for the device when setting it up.
n Do not install it near sources of heat such as radiators, ovens or similar devices.
n Ensure that the device is connected only to a standard AC outlet.
n Position it in such a manner that no dust, liquids or foreign objects can enter the
housing.
n Unplug the external power supply from the AC outlet if you do not intend to use the
device for an extended period.
n The device must be serviced by trained personnel if:
o
the external power supply is damaged,
o
objects or liquids have entered the device,
o
the device was left in the rain,
o
the device was damaged by dropping,
o
the device is malfunctioning.
n Do not attempt to repair the device yourself. Please consult a trained technician.
n Please ensure that all analog devices are turned off before plugging them in. This will
protect you from any possible—albeit weak—electrical shocks, as well as protecting
your speakers and your hearing from sudden peaks. For digital devices, be sure to at
least lower the volume on your playback equipment.
4
SINE HP 48 (English)
Welcome!
We are pleased that you have chosen a TerraTec Producer rack system and would like to
congratulate you on your decision. You've purchased a sophisticated product
representing the state of the art of studio technology, and we're convinced that our
product will prove extremely useful to you in the coming years and provide you with a
great deal of entertainment.
This manual describes the SINE HP 48 headphone amp. It contains everything you need
to know about the correct use of the systems, as well as a number of practical tips that
will get you started right away.
We hope you enjoy your headphone amp and would like to suggest that you browse this
hopefully entertaining manual when you get the chance. In addition to the important
information about its technology, we have outlined a number of typical applications as well
as tips and tricks wherever appropriate. We're convinced that even experienced users will
profit from this guide.
Thanks for your attention—and here's to your creativity.
Sincerely,Your TerraTec Producer Team
Scope of delivery
Start by making sure that the contents of the package are complete. The SINE HP 48
package should contain at least the following:
n 1 19" SINE HP 48 rack module
n 1 12V AC power adapter (alternating current!)
n 1 customer service card
n 1 registration card with the serial number
n 1 BeSonic Premium Account registration card
n This manual
Please return the enclosed registration card to us at the earliest possible opportunity or
register online at http://www.terratec.com/register.htm. This is important for support
and hotline services.
SINE HP 48 (English)
5
Connections and controls
The front panel:
1. VOLUME: controls the signal level per channel
2. OUT A/OUT B: headphone outputs, 1/4" stereo jack
3. POWER LED: indicates the operational status
The rear panel:
4. 12 V AC: 12V AC power adapter (alternating current)
5. INPUT 2: stereo input, 1/4" stereo jack
6. INPUT 1 LEFT (STEREO): left input in mono mode or stereo input for stereo signal,
1/4" stereo jack
7. INPUT 1 RIGHT (MONO): right input, 1/4" mono jack
6
SINE HP 48 (English)
Function
To use the SINE HP 48 headphone amp, connect it to an AC power supply. Use the
included 12 V AC adapter for this purpose.
The LED on the front panel indicates that the device is operational (no on/off switch).
Unplug the external power supply from the AC outlet if you do not intend to use the device
for an extended period.
The SINE HP 48 features 4 independent stereo amplifiers. The input for Channel 1 on the
rear panel has a mono and a stereo socket. You can therefore connect either 2 mono
jack cables, one stereo jack cable or one mono jack cable (monophonic signal playback)
to this input. When properly connected, the SINE HP 48 will automatically detect the
connection type.
Channels 2, 3 and 4 each have stereo sockets as inputs (use stereo jack cables!).
The SINE HP 48 supports cascading. Apply an audio signal to Channel 1 and it will be
available on all 4 channels.
If you now apply an additional audio signal to Channel 2, that signal will also be available
on Channels 3 and 4, whereas the first audio signal will still be available on Channel 1.
If you now apply a third audio signal to Channel 3, it will also be available on Channel 4.
SINE HP 48 (English)
7
If all four inputs are in use, all channels will be used independently.
The input signals can also be split.
For best results, use 600 ohm headphones. Using headphones with a lower impedance
(e.g. 40 ohms) may result in distortion at high volumes.
8
SINE HP 48 (English)
Technical data
Inputs:
unbalanced
Frequency response:
20 Hz – 20 kHz
Input impedance:
10 kohm
Max. output power:
0.2 W ea. at 600 ohms
Outputs:
unbalanced
Frequency response:
20 Hz – 20 kHz
External power supply:
12 V AC, >500 mA
Dimensions:
482.6 x 87 x 44 mm (19”, 1U)
SINE HP 48 (English)
9
Service at TerraTec Producer
Sometimes, no matter how good the weather is, things do not always work as they
should. Problems can arise in the best studio systems. If this happens to you, the
TerraTec Producer team is happy to offer its service and support.
Internet, Hotline
If you have a tough problem—where you cannot solve the problem yourself, the support
in this manual doesn't resolve the problem, and your dealer can't fix it either—please
contact us directly.
If possible, try our Internet support system first: under http://www.terratec.com/ you will
always find current answers to frequently asked questions (FAQ).
If these options do not provide the necessary help, please contact our phone hotline. You
can also reach us online.
To do so, visit us at http://supporten.terratec.net/.
In either case, please have the following information handy:
n your registration number
n this documentation.
In addition, it would be helpful to our technicians if you are at your device during the
phone call to directly carry out tips and tricks. Please do not forget to write down the
name of the respective support technician if you contact our Support Team. You will need
this name if a defect is present and your device needs to be mailed to us.
10
SINE HP 48 (English)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement