Century 9055 [0501763] [09/2010]

Century 9055 [0501763] [09/2010]
CENTURY
L
E
G
E
N
D
A
R
OWNER'S MANUAL
®
Y
L
E
A
D
E
R
S
H
I
P
9055
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501763
09 / 2010
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2011 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 thru I-5
BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-6 & I-7
BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8 thru I-11
UNDERLIFT & TOWER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 thru I-15
BOOM HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 & I-17
UNDERLIFT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-18 & I-19
PUMP, VALVE & FILTER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-20 & I-21
WINCH HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-22 & I-23
SPADE HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-24 & I-25
CONTROL LINK KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-26 & I-27
LEFT CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-28 & I-29
RIGHT CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-30 & I-31
PARTS LIST 9055 3-STAGE BOOM 2-SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-32 thru I-45
PARTS LIST 9055 3-STAGE BOOM 2-SPEED W/ LOWRIDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-46
ii
Section I - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Century 9055
that may be required when part replacement is necessary. Be certain to use only original equipment replacement
parts for warranty purposes as well as for keeping your unit in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer's Parts
Department.
1.
Manual Number & Date of Publication
2.
Manual Page Number
3.
Page Title
4.
Reference Number of Part Desired
5.
Part Number
6.
Part Description
7.
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
PART NUMBER
0300113
0301861
0302227
0302228
0302538
0302792
0303089
0307843
0400066
0400109
0400114
0400121
0400122
0400128
0400132
0400139
0400148
0400150
0400206
0400288
0400382
0400392
0400408
0400431
0400452
0400482
0400491
0400497
0400498
0400776
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
QUICK PIN
CENTER BONDED MOUNT
SPECIAL WASHER
SPRING BUSHING, 3.5OD X 3ID X 2.5
HYD CYLINDER
RAMP PAD
CYLINDER - 4" BORE 30" STROKE
1/4-20 X 3/4 HHCS GR.5,ZP
5/16-18 X 1 HHCS GR.5,ZP
5/16-18 X 3 HHCS GR 5 ZP
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16X1.25 FLAT HD SOC
3/8-16 X 1 1/2 HHCS GR.5,ZP
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
3/8-16 X 1-1/4 HHCS GR5 ZP
3/8-16 X 2-1/2 HHCS GR5 ZP
1/2-13 X 5 HHCS GR.5, ZP
3/4-10 X 2-1/2 HHCS GR.8 GOLD
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
3/4-10 NYLOCK HEX NUT GR.8, ZP
1/4 HELICAL LOCK WASHER ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER GR.8,YZ PLATED
WASHER, 1/2' ID X 2" OD X .150
HEX NUT
I-3
QTY
8
2
4
4
2
2
2
2
8
2
2
4
14
10
4
4
6
4
2
12
2
42
2
12
8
4
20
6
14
2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY (cont'd)
I-4
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY (cont'd)
ITEM
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
PART NUMBER
0708094
0710545
0711249
0711250
0711287
0713128
0713129
0715584
0715694
0717066
0717827
0719122
0719585
0804334
0804405
0806001
0806004
0806521
0807181
0807627
0807628
0807630
0907802
9041402
9041403
9046354
9402970
942480011
GA0215
DESCRIPTION
PIN - LIFT CYLINDER
HR ANGLE
PLATE - CONTROL BOX
PLATE - CONTROL BOX
PLATE - BULKHEAD MOUNTING
SHAFT - LOWER SPADE
SHAFT - UPPER SPADE
COVER PLATE
PIN - SPADE PIVOT
COVER - VALVE
PLATE - VALVE MOUNTING
PLATE - VALVE MTG.
"D" RING - TOWING
PIN, MULTI-POSITION
BOOM PIVOT BRKT
SUBFRAME WELDMENT
FRONT TOOLBOX MOUNT
HAND RAIL WLMT
COVER SUPPORT WLMT
INNER SPADE WLMT (LH)
INNER SPADE WLMT (RH)
LOWER SPADE PAD WELDMENT
KIT - RESERVOIR
1/2-13NC X 1 1/4 HHCS, ZP,GR.8
1/2-13 X 1-1/2 HHCS GR 8 ZP
1/4 X 2-1/2 ROLL PIN ZP
TOOLBOX MTG. PAD
REAR WASHER PLATE
PIN, D RING
I-5
QTY
2
2
2
1
1
2
2
2
2
1
1
1
2
2
2
1
1
2
4
1
1
2
1
14
6
2
14
12
2
Section I - PARTS (cont'd)
BODY ASSEMBLY
I-6
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BODY ASSEMBLY
PART NUMBER
0303127
0303128
0306958
0307220
0310496
0310631
0310975
0310976
0400103
0400148
0400382
0400392
0717386
0718139
DESCRIPTION
GROMMET, MARKER LIGHT
GROMMET, TAIL LIGHT
LIGHT OVAL AMBER 60 LED
LIGHT OVAL AMBER 60 LED
MARKER LAMP, RED 2-1/2" ROUND
MUD FLAP
TOOLBOX LH AL 156CA 2010
TOOLBOX RH AL 156CA 2010
5/16-18 X 1 1/4 HHCS GR.5, ZP
3/8-16 X 1-1/4 HHCS GR5 ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
BAR - MUDFLAP
ANGLE - MUD FLAP MOUNT
I-7
QTY
2
12
8
4
2
2
1
1
16
8
16
8
2
2
Section I - PARTS (cont'd)
BOOM ASSEMBLY
I-8
Section I - PARTS (cont'd)
BOOM ASSEMBLY
ITEM
PART NUMBER
3012-793001
0300113
0301388
0301895
0303441
0303490
0303505
0305023
0306825
0307160
0307402
0307406
0307432
0400059
0400066
0400114
0400118
0400121
0400126
0400146
0400176
0400177
0400206
0400211
0400220
0400223
0400264
0400284
0400349
0400390
0400408
0400421
0400430
0400448
0400451
0400452
0400461
0400471
0400472
0400473
0400482
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
DESCRIPTION
PLATE - LUBE MOUNT
GREASE FITTING, 1/4-28 STRAIGHT
ELBOW, 8MJ-8MB90
GREASE FITTING, 1/8 NPT STRAIGHT
SHEAVE, 10"
WEAR PAD (1/2 X 1 X 4)
WINCH, DP MODEL S50-50K
SNAP RING 5100-0225PP
PAD - WEAR
CABLE - EXT ASSY 3-STAGE BOOM
CYLINDER - BOOM EXTEND
SLIDE PAD
BUSHING - BRONZE
1/4-20 X 5/8 HHCS GR 5 ZP
1/4-20 X 3/4 HHCS GR.5,ZP
5/16-18 X 3 HHCS GR 5 ZP
5/16-18 X 3/4 HHCS GR.5 ZP
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 2-1/4 HHCS GR.5 ZP
1/2-13 X 1 HHCS GR.5,ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
1/2-13 X 5 HHCS GR.5, ZP
1/2-13 X 1-3/4 HHCS GR5 ZP
1/2-13 X 5-1/2 HHCS GR5 ZP
3/8-16 X 3/4 FL. HD. SOCKET SCREW
5/8-11 X 2-1/4 HHCS GR5 ZP
3/4-10 X 2-1/2 HHCS GR.8 GOLD
SCREW, 3/8"-16 X 3/4" FL HD SKT
3/8-16 HEX JAM NUT W/PELL
1/2-13 NYLOCK HEX NUT ZP
5/8-11 NYLOCK HEX NUT ZP
3/4-10 NYLOCK HEX NUT ZP
1-1/4-12 HEX JAM NUT 1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
1-1/4-12 NEX NUT GR8 ZP
7/8-14 UNF HEX NUT
7/8-14 UNF HEX NUT JAM
7/8 FLATWASHER HARDENED
3/8 HELICAL LOCK WASHER ZP
I-9
QTY
1
10
2
1
2
2
1
2
4
2
1
1
4
2
6
1
4
2
20
1
2
4
2
2
2
5
4
32
14
1
6
4
32
2
6
8
2
2
2
2
22
Section I - PARTS (cont'd)
BOOM ASSEMBLY (cont'd)
I-10
Section I - PARTS (cont'd)
BOOM ASSEMBLY (cont'd)
ITEM
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
PART NUMBER
0400483
0400491
0400492
0400501
0400510
0400587
0400776
0705104
0708124
0709702
0709703
0709704
0709705
0715953
0717262
0717743
0717744
0717746
0717747
0717909
0718134
0719585
0802460
0802463
0806712
0806716
0806721
0806722
0806751
0806752
0806824
9012549
9012552
9012584
9041402
916040004
946030004
GA0215
0301949
0307403
0906535
DESCRIPTION
LOCKWASHER, 3/8" COUNTERSUNK
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER ZP
WASH - SAE 1 1/4 HARDENED PL
3/4 FLAT WASHER ZP
1/4 X 1-1/2 ROLL PIN ZP
HEX NUT
PLATE - SUPPORT
PIN-TILT CYL BASE
HR ANGLE
HR ANGLE
HR ANGLE
HR ANGLE
PIN - BOOM PIVOT
SHIM - SLIDE PAD
ROD - EXTEND SHEAVE SPACER
PIN - EXTEND CYLINDER
PLATE - SLIDE PAD SUPPORT
PIN - CABLE RETRACT
SHEAVE - 5 " DIA RETRACT
PLATE - SLIDE PAD SUPPORT
"D" RING - TOWING
TOWER PIVOT PIN WLDMT
LIFT CYL PIN WELDMT
INNER BOOM TUBE WLMT
9055 OUTER BOOM WLD (3-STAGE)
EXTEND SHEAVE BRACKET WELDMENT
SHAFT, EXTENSION SHEAVE WELDMENT
RETRACT SHEAVE SUPPORT WLD
SHAFT - RETRACT SHEAVE WELDMENT
INNER BOOM TUBE WLMT
CONNECTOR, 3/8 TUBE X 1/8 NPT
BULKHEAD COUPLING, 1/8 ELBOW, 1/4 NPT X 3/8 TUBE 90
1/2-13NC X 1 1/4 HHCS, ZP,GR.8
WEAR PAD ~ LOWER
UPPER WEAR PAD - RECOVERY
PIN, D RING
3/8" OD AIRLINE, SYNFLEX
CABLE - EXT. ASSEMBLY 3-STAGE
SWIVEL ASSEMBLY
I-11
QTY
1
8
2
2
16
2
1
2
1
2
2
2
2
1
10
2
1
4
1
4
2
1
2
2
1
1
1
1
1
4
1
2
1
1
2
1
2
2
1
2
2
Section I - PARTS (cont'd)
UNDERLIFT & TOWER ASSEMBLY
I-12
Section I - PARTS (cont'd)
UNDERLIFT & TOWER ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
PART NUMBER
0300108
0300113
0301197
0301398
0301817
0301818
0301822
0302538
0303088
0303097
0303098
0303501
0306746
0306825
0307105
0400044
0400122
0400132
0400139
0400151
0400176
0400196
0400228
0400257
0400271
0400392
0400421
0400480
DESCRIPTION
RETAINING RING
GREASE FITTING, 1/4-28 STRAIGHT
DETENT SPRING
DETENT BALL
SLIDE PAD, HORIZ BOOM
SLIDE PAD, HORIZ BOOM
O-RING, PIVOT PIN
SPRING BUSHING, 3.5OD X 3ID X 2.5
BUSHING, PIVOT PIN
THRUST WASHER, 1/8" THICK
THRUST WASHER, 1/16" THICK
HYD CYLINDER, EXT
CYLINDER, HYD LIFT
PAD - WEAR
CYLINDER, HYDRAULIC
DRIVE SCREW, #10-24 X 1/2" RD HD
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
3/8-24 X 3/4 HHCS GR5 ZP
1/2-13 X 1 HHCS GR.5,ZP
SCREW, 1/2"-13 X 1-1/4" SKT HD
SCREW, 3/8"-24 X 5/8" BUTTON HEAD SKT
5/8-11 X 3-1/4 HHCS GR5 ZP
SCREW, 5/8"-11 X 4-1/2" SKT HD CAP
3/8-16 NYLOCK HEX NUT ZP
5/8-11 NYLOCK HEX NUT ZP
3/8 FLAT WASHER ZP
I-13
QTY
2
12
1
1
3
2
1
4
1
1
1
1
1
2
2
8
1
1
2
6
1
4
4
2
2
3
2
1
Section I - PARTS (cont'd)
UNDERLIFT & TOWER ASSEMBLY (cont'd)
I-14
Section I - PARTS (cont'd)
UNDERLIFT & TOWER ASSEMBLY (cont'd)
ITEM
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
PART NUMBER
0400481
0400482
0400491
0400508
0400990
0703277
0707034
0708470
0710051
0710052
0710450
0712195
0717095
0717851
0718764
0719515
0802459
0802461
0802914
0803440
0803441
0803442
0804483
0805960
0806756
9048800
945030007
BK2003
DESCRIPTION
LOCKWASHER, 3/8" EXT TOOTH
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
5/8 HELICAL LOCK WASHER ZP
1/2-13 X 1/2 SKT HD SET SCREW ZP
SLIDER PAD
STOP PLATE
SPACER - DETENT BALL
PIVOT PIN, TOP HALF
PIVOT PIN, BOTTOM HALF
BAR, RETRACT
SHAFT, EXTEND CYL
SHAFT
STOP BLOCK
SHAFT, EXT CYLINDER
PLATE, STOP
PIN-FOLD CYL. WLDMT
PIN - UNDERLIFT PIVOT WELDMENT
CROSSBAR WELDMENT
OUTER BOOM WLMT.
BOOM, 2ND STAGE WELDMENT
BOOM, U/L INNER WELDMENT
CABLE TIE BACK WLMT
TOWER WELDMENT - 9055
PIN WELDMENT - FOLD CYLINDER
5/8 WELDLESS CHAIN LINK
SPRING - HOSE TENSIONER
PAD-WEAR
I-15
QTY
6
1
5
2
8
2
2
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
2
1
1
2
2
2
Section I - PARTS (cont'd)
BOOM HYDRAULICS
I-16
Section I - PARTS (cont'd)
BOOM HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PART NUMBER
0300041
0300644
0300657
0300659
0301376
0301388
0301529
0302275
0302276
0302296
0302568
0302574
0302576
0302792
0302796
0303346
0303347
0303354
0303355
0307062
0307107
0307402
0307613
0400078
0400367
0400451
0703001
DESCRIPTION
CONNECTOR 8MJX8MB
HOSE CLAMP, 8"
HOSE ASSEMBLY, 46" LG
HOSE ASSEMBLY. 45" LG
CONNECTOR 8MJX10MB
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY - 58 LG.
CONNECTOR 8MJX6MB
ELBOW, 8MJ-6MB90
VALVE, 3 SPOOL
HYDRAULIC TUBING
FITTING - BULKHEAD - RUN TEE W/NUT
FITTING, BULKHEAD UNION
HYD CYLINDER
BRANCH TEE, 8MJ-8MJ-8FJX
HOSE ASSEMBLY, 45" LG.
HOSE ASSEMBLY, 50" LG
HOSE ASSEMBLY, 33" LG
HOSE ASSEMBLY, 45" LG.
VALVE, 6 SPOOL VDP12-CDDD
VALVE HOLDING 4000 PSI SAE
CYLINDER - BOOM EXTEND
HYDRAULIC TUBING ASSY - 1/2" DIA
1/4-20 X 2 HHCS GR5 ZP
1/4-20 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
BRACKET - MOUNTING
I-17
QTY
2
2
2
2
4
4
2
2
4
1
2
2
2
2
2
1
1
1
1
1
2
1
2
4
4
4
2
Section I - PARTS (cont'd)
UNDERLIFT HYDRAULICS
I-18
Section I - PARTS (cont'd)
UNDERLIFT HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
PART NUMBER
0300044
0301470
0301473
0301619
0301620
0301662
0301730
0301778
0301837
0302035
0302504
0302514
0302548
0302549
0302551
0302552
0302576
0302584
0302805
0302842
0302911
0302914
0302915
0303176
0303342
0303348
0303501
0303562
0303563
0306746
0306870
0307062
0307105
0307106
0307107
0400064
0400078
0400118
0400366
0400367
0400451
0400452
0703001
DESCRIPTION
CONNECTOR 6MJX8MB
ELBOW, 6MJ-8MB90
HOSE ASSEMBLY, 18" LG
BRANCH TEE, 6MJ-6MJ-6MB
FITTING, ELBOW, 6MJ-6MB90
HOSE ASSEMBLY, 120" LG
DOUBLE HOLDING VALVE
CONNECTOR 6MJX10MB
INLINE ORIFICE
HOSE ASSEMBLY, 18" LG
TUBE ASSEMBLY
ADAPTER, 8MJ-6MJ
CLAMPING UNIT (SET) HC-10-6
SPLIT BUSH RUBBER C-SB10-8 1/2
SOCKET HEAD C-SN-10
WELD ADAPTER, C-WA-10
FITTING, BULKHEAD UNION
HOSE ASSEMBLY, 50" LG.
HOSE ASSY - 10" LG
ELBOW, 8MJ-8MB90
HOSE ASSEMBLY, 88" LG
HOSE ASSEMBLY, 35" LG
HOSE ASSEMBLY, 12" LG CONNECTOR 10MPX8FB
HOSE ASSEMBLY, 30" LG
HOSE ASSEMBLY, 48" LG
HYD CYLINDER, EXT
HOSE ASSEMBLY, 37" LG
HOSE ASSEMBLY, 27" LG
CYLINDER, HYD LIFT
HOSE ASSEMBLY, 96" LG
VALVE, 6 SPOOL VDP12-CDDD
CYLINDER, HYDRAULIC
CONNECTOR 4MBX6FB
VALVE HOLDING 4000 PSI SAE
SCREW, 1/4"-20 X 2 1/4" RD HD PHIL SS
1/4-20 X 2 HHCS GR5 ZP
5/16-18 X 3/4 HHCS GR.5 ZP
1/4-20 HEX NUT ZP 1/4-20 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
BRACKET - MOUNTING
I-19
QTY
3
6
2
1
4
2
1
5
1
1
6
6
4
12
10
10
6
2
2
2
1
1
2
1
6
2
1
1
2
1
1
1
2
1
1
2
2
10
2
2
4
2
1
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
I-20
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
PART NUMBER
0300287
0300364
0300649
0300666
0300671
0300891
0301093
0301350
0301545
0301894
0301965
0302083
0302088
0302205
0302227
0302228
0302242
0302296
0302570
0302698
0302756
0302826
0302829
0302901
0302932
0303155
0303338
0303339
0303341
0305006
0307062
0307119
0307344
0400122
0400149
0400150
0400177
0400392
0400480
0400491
0706114
0802747
0803193
0806653
0806654
DESCRIPTION
PIPE BUSHING, 1 1/4" TO 1" NPT REDUCER
HOSE CLAMP, 7/8" TO 2-3/4"
CONNECTOR, 12MJ-12MJ
BARB, 24C4-24MP
SUCTION HOSE, 1-1/2" I.D. 100R4
PIPE NIPPLE - 1-1/2 X 3
BULKHEAD UNION, 3/4" JIC
PIPE, 1-1/2" CLOSE NIPPLE
ELBOW, 12MJ-12MB90
FILTER ASSEMBLY, SPIN ON
HOSE ASSEMBLY, 131" LG.
16MJ - 12MB 90 ELBOW
BALL VALVE - 1 1/2 BRONZE
GAUGE, FLUSH MOUNT 6000 PSI
CENTER BONDED MOUNT
SPECIAL WASHER
ELBOW, FLANGE 24-24FL90 W/ FLANGE KIT
VALVE, 3 SPOOL
SIGHT GAUGE
HOSE BARB, 1-1/4"
SUCTION HOSE, 1-1/4" ID (100R4)
RUN TEE, 12MJ-12FJX-12MJ
ADAPTER, 12FJ-6MJ
HOSE - HYD ASSY 120" LG
FITTING ~ 12MJ-20FL 90
PIPE PLUG - 3/4 NPT (MAGNETIC)
ELBOW, 16MJ-16MP45
HOSE ASSEMBLY, 45" LG.
HOSE ASSEMBLY, 31" LG.
FILLER CAP
VALVE, 6 SPOOL VDP12-CDDD
HYDR. PUMP - P350B242JEAB20-7MHAB20-1
SUCTION STRAINERS
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 5/8 HHCS GR5 ZP
3/8-16 X 2-1/2 HHCS GR5 ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
3/8-16 NYLOCK HEX NUT ZP
3/8 FLAT WASHER ZP
1/2 HELICAL LOCK WASHER ZP
GASKET - CLEANOUT & FILLER COVER
FILLER PIPE WELD'T
SUPPORT - RESERVOIR WELDMENT
RESERVOIR LEFT WELDMENT
RESERVOIR RIGHT WELDMENT
I-21
QTY
2
6
2
2
4
2
2
2
2
2
2
2
2
2
4
4
2
1
2
2
1
2
2
2
2
2
2
2
2
2
1
1
2
8
24
4
4
12
24
4
2
2
2
1
1
Section I - PARTS (cont'd)
WINCH HYDRAULICS
I-22
Section I - PARTS (cont'd)
WINCH HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART NUMBER
0301093
0301577
0302296
0302552
0302827
0302835
0302836
0302837
0303079
0303344
0303345
0303350
0303351
0303352
0303505
0307062
0400118
9010520
9011071
GX263
DESCRIPTION
BULKHEAD UNION, 3/4" JIC
TUBING- PLASTIC 1/4 OD X 5" AIR LINE
VALVE, 3 SPOOL
WELD ADAPTER, C-WA-10
CONNECTOR 10MJX10MB
C-WA-10 WELD ADAPTER
SOCKET HEAD STACKING NUTS
SPLIT BUSHING 1"
CONNECTOR, 10MJ-8MB
10G 10FJX HOSE END
HOSE ASSEMBLY, 48" LG
HOSE ASSEMBLY, 89" LG
HOSE ASSEMBLY, 105" LG
HOSE ASSEMBLY, 117" LG
WINCH, DP MODEL S50-50K
VALVE, 6 SPOOL VDP12-CDDD
5/16-18 X 3/4 HHCS GR.5 ZP
FITTING,BRASS ELB. 1/4T-1/4MP
FITTING,BRASS TEE 1/4T-1/4T-1/4T
FITTING,ELBOW 10MJ-10MB90
I-23
QTY
4
2
1
2
2
4
2
4
4
2
2
2
1
1
1
1
2
2
1
2
Section I - PARTS (cont'd)
SPADE HYDRAULICS
I-24
Section I - PARTS (cont'd)
SPADE HYDRAULICS
ITEM
1
2
3
4
5
6
7
PART NUMBER
0300044
0301778
0302296
0303176
0303748
0307062
0307843
DESCRIPTION
CONNECTOR 6MJX8MB
CONNECTOR 6MJX10MB
VALVE, 3 SPOOL
CONNECTOR 10MPX8FB
HOSE ASSEMBLY, 32"
VALVE, 6 SPOOL VDP12-CDDD
CYLINDER - 4" BORE 30" STROKE
I-25
QTY
6
2
1
2
4
1
2
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
I-26
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
ITEM
PART NUMBER
DESCRIPTION
1
--
9055 CONTROL ASSEMBLY 9 HANDLE
2
--
9055 CONTROL ASSEMBLY RH 6H
3
0302457
CONTROL CABLE
4
0303008
CLEVIS - ADJUSTABLE
5
0303427
CONTROL CABLE
6
0400103
5/16-18 X 1 1/4 HHCS GR.5, ZP
7
0400382
5/16-18 NYLOCK HEX NUT ZP
8
0400383
5/16-24 HEX NUT ZP
9
0400466
LOCKWASHER, 5/16" INTERNAL TOOTH
10
0711249
PLATE - CONTROL BOX
11
0711250
PLATE - CONTROL BOX
12
0801054
CONNECTOR - CONTROL CABLE
I-27
QTY
1
1
5
3
10
9
9
27
27
2
1
6
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
I-28
Section I - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
PART NUMBER
0300835
0300836
0300837
0302205
0302457
0302726
0302856
0302917
0303382
0303427
0307604
0307778
0400005
0400066
0400101
0400107
0400109
0400369
0400379
0400382
0400383
0400393
0400466
0400512
0400527
0402094
0500914
0500915
0500916
0711235
0717198
0717461
0723230
0723233
0806006
0806007
0806515
9024041
9053524
DESCRIPTION
KNOB, BOOM (UP-DN)
KNOB, JACK (UP-DN)
KNOB, BOOM (IN-OUT)
GAUGE, FLUSH MOUNT 6000 PSI
CONTROL CABLE
GREASE FITTING, 1/4"-28 X 45°
KNOB, TILT (UP-DN)
KNOB, WHL LIFT EXT (IN-OUT)
KNOB, FOLD (UP-DN)
CONTROL CABLE
KNOB - RED LONG
PLUG, FILLER
#6-32 X .5 FLAT HEAD PHILLIPS
1/4-20 X 3/4 HHCS GR.5,ZP
SCREW, 5/16"-18 X 1" RD HD SLOTTED SS
5/16-2.5 X 2-1/2 HHCS
5/16-18 X 1 HHCS GR.5,ZP
1/4 "J" TYPE TINNERMAN
CLIP, 5/16" "J" TYPE TINNERMAN
5/16-18 NYLOCK HEX NUT ZP
5/16-24 HEX NUT ZP
3/8"-16 HEX JAM NUT
LOCKWASHER, 5/16" INTERNAL TOOTH
3/4 FLAT WASHER (SPECIAL)
CLEVIS PIN, 5/16" X 5/8" COTTERLESS
HEX NUT & STAR WASHER, #8-32 ZP
DECAL- CONTROL PANEL WRECKER
DECAL - CTROL PANEL SPADE
DECAL - CONTROL PANEL UNDERLIFT
CLAMP - SHAFT PIN - CONTROL HANDLE (9)
PLATE - SHAFT SUPPORT
PANEL - CONTROL (9)
PANEL - GAUGE (9 HDL, STD)
CLEVIS WELDMENT
CONTROL FRAME WLMT (9) HANDLE
CONTROL HANDLE WLMT
MCGILL SWITCH
BRONZE BUSHING (.752 X .879 X .750)
I-29
QTY
1
2
1
2
3
9
1
1
1
6
2
2
6
3
4
4
4
3
4
8
9
9
9
2
9
6
1
1
1
2
1
2
1
1
9
1
9
3
18
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
I-30
Section I - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
PART NUMBER
0300835
0300836
0300837
0302457
0302726
0303427
0307166
0307604
0307778
0400061
0400101
0400107
0400109
0400369
0400379
0400382
0400393
0400466
0400512
0400527
0500914
0500915
0711235
0717203
0717206
0717461
0723231
0723232
0806006
0806008
0806515
9024041
9053524
DESCRIPTION
KNOB, BOOM (UP-DN)
KNOB, JACK (UP-DN)
KNOB, BOOM (IN-OUT)
CONTROL CABLE
GREASE FITTING, 1/4"-28 X 45°
CONTROL CABLE
PLUG 7/8
KNOB - RED LONG
PLUG, FILLER
SCREW, 1/4"-20 X 2 1/4" RD HD PHIL SS
SCREW, 5/16"-18 X 1" RD HD SLOTTED SS
5/16-2.5 X 2-1/2 HHCS
5/16-18 X 1 HHCS GR.5,ZP
1/4 "J" TYPE TINNERMAN
CLIP, 5/16" "J" TYPE TINNERMAN
5/16-18 NYLOCK HEX NUT ZP
3/8"-16 HEX JAM NUT
LOCKWASHER, 5/16" INTERNAL TOOTH
3/4 FLAT WASHER (SPECIAL)
CLEVIS PIN, 5/16" X 5/8" COTTERLESS
DECAL- CONTROL PANEL WRECKER
DECAL - CTROL PANEL SPADE
CLAMP - SHAFT PIN - CONTROL HANDLE (6)
SPACER
PLATE - SHAFT SUPPORT
PANEL - CONTROL (6 HANDLE)
PANEL - SWITCH
CLEVIS WELDMENT
CONTROL FRAME WLMT (6,7,8 HANDLE)
CONTROL HANDLE WLMT
MCGILL SWITCH
BRONZE BUSHING (.752 X .879 X .750)
I-31
QTY
1
2
1
2
6
4
2
2
2
3
4
4
2
3
4
6
12
6
2
6
1
1
2
1
1
1
1
1
6
1
6
2
12
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST
ITEM
PART NUMBER
--
1
2
3
125956023
0907135
0908031
0911135
--
4
5
6
7
8
9
10
11
12
13
14
15
16
DESCRIPTION
QTY
9055 3-STAGE 2-SPEED
SHIP KIT - 9055
BSC UNIT ASSY 9055 2/SPD 3STG
INTEGRATED NON-LIGHTED CONTROL
1
1
1
0907135
0300844
0301215
0303226
0307119
0310599
0902687
0903064
0903137
0903729
0903953
0904217
0908275
0910480
SHIP KIT - 9055
3/4 X 1/8 CLOSED CELL
WIRE ROPE 3/4X6X37 IWRC 250'
80 AMP CIRCUIT BREAKER
PUMP - HYDRAULIC
CRC HD CORROSION INHIBIT SPRAY
DATA PACKAGE 9055
KIT-BODY MOUNTING 9055
KIT-TOWER RAMP 9055/5030
CHAIN-SAFETY ASSY
KIT-STANDARD 9055 FORK
HARDWARE-BODY MOUNTING
KIT, FENDER SKIRT-AL TBOX LWRK
PURCHASED SHIP KIT - 9055
15
2
2
1
1
1
1
1
1
1
1
1
1
--
17
18
0902687
0500620
0501763
DATA PACKAGE 9055
MANUAL 9055
CENTURY LARGE INT INSTL MANUAL
1
1
--
19
20
21
22
0903064
0707174
0707175
0711286
0717507
KIT-BODY MOUNTING 9055
ANG TAILGATE MTG
PLATE, MOUNTING 5030
SPACER - REAR FRAME BRKT
PLATE - MOUNTING
2
2
2
2
--
23
24
25
0903137
0303089
0400128
0400392
KIT-TOWER RAMP 9055/5030
RAMP PAD - 9055/5030
3/8-16X1.25 FLAT HD SOC
3/8-16 NYLOK HEX NUT ZINC
2
10
10
--
26
0903729
0307626
CHAIN-SAFETY ASSY
SAFETY CHAIN ASY,1/2X14' GR100
2
0903953
0200018
0200019
0200020
0200021
0200022
0200023
0200024
0200042
0306564
0310230
0400585
KIT-STANDARD 9055 FORK
FORK-SHORT, 3IN OPNG
FORK-SHORT, 4-1/2IN OPNG
FORK-MED, 3IN OPNG
FORK-MED, 4-1/2IN OPNG
FORK-LONG, 3IN OPNG
FORK-LONG, 4-1/2IN OPNG
FORK-OFFSET REAR AXLE
FORK-MEDIUM ROUND AXLE
ALUM T HANDLE 5/8" X 1-1/4"
CLEVIS PIN, 5/8 X 6 ZINC PLT
1-1/4" HAIR PIN COTTER
2
2
2
2
2
2
2
2
4
2
2
--
27
28
29
30
31
32
33
34
35
36
37
I-32
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
38
39
40
41
42
43
44
45
46
0903953
0400886
0801186
0801186
0801459
0803591
0803592
0807023
0900900
0908672
KIT-STANDARD 9055 FORK (cont'd)
HITCH PIN CLIP,1/8 DIAX2.6 OAL
ADAPTER-HDU CHAIN (LH OR RH)
ADAPTER-HDU CHAIN (LH OR RH)
BRKT-RISER-HDU
ADAPTER-LEFT FORK
ADAPTER-RIGHT FORK
BRKT-PIVOT SPRING LIFT
PIN-ASSY, RETAINER
PIN-RET.-SPRING LIFT
2
1
1
2
1
1
2
2
2
--
47
48
49
50
51
52
53
0900900
0302474
0311167
0311210
0400568
0400573
0402020
0703426
PIN-ASSY, RETAINER
PIN, LINCH 3/16
3/16 SWAGE FOR 1/8 COATED CABL
CABLE, PIN RETAINER ASSY .125
3/8X3" ROLL PIN ZP
3/16X1-1/4ROLL PIN ZP
1/4-20NC X 3/4 HEX HD SS
PIN,RETAINER
1
1
1
1
1
1
1
--
54
55
56
57
58
59
60
0908672
0302474
0311167
0311210
0400568
0400573
0402020
0718917
PIN-RET.-SPRING LIFT
PIN, LINCH 3/16
3/16 SWAGE FOR 1/8 COATED CABL
CABLE, PIN RETAINER ASSY .125
3/8X3" ROLL PIN ZP
3/16X1-1/4ROLL PIN ZP
1/4-20NC X 3/4 HEX HD SS
PIN, RETAINER
1
1
1
1
1
1
1
--
61
62
63
64
0904217
0400286
0400301
0400431
0400436
HARDWARE-BODY MOUNTING
3/4-10X2.75" HHCSGR 8GOLD
7/8-9X3HHCS GR5 ZP
3/4-10 NYLOK HEX GR 8 ZP
7/8-9 NYLOK HEX NUT ZP
44
4
44
4
--
65
66
0908275
0307270
9025068
KIT, FENDER SKIRT-AL TBOX LWRK
SIKAFLEX-GRAY 221-G SEALANT
REFLECTOR-PETERSON B489R DECAL
1
4
0910480
0300132
0303226
0500554
0500686
0501167
0501669
0711438
0902333
0904183
0906838
PURCHASED SHIP KIT - 9055
14" UV BLK CABLE TIE
80 AMP CIRCUIT BREAKER
FLAG, AMERICAN LT
DECAL - RETRACT CAUTION
PLATE, CENTURY, NAME, PLASTIC
DECAL, AIR FREE SPOOL
BRACKET - HOSE
KIT-GLAD HAND
KIT-AIR TENSIONER
GROUND KIT MTG.HARNESS CENTURY
100
2
2
2
2
2
8
1
1
1
--
67
68
69
70
71
72
73
74
75
76
I-33
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
77
78
79
80
81
0910480
0907043
0908095
0908382
0908446
0911090
PURCHASED SHIP KIT - 9055 (cont'd)
KIT, HOLE PLUG TO0L BOX
KIT - PUMP 9055
KIT - MUDFLAP LRG CENTURY WKR
KIT, SWITCH/DECALS 2-SPD WINCH
KIT-SAFETY TREAD-INTEGRATED
1
1
1
1
1
--
82
83
84
85
86
87
88
0902333
0301909
0301946
0301948
0304363
0400070
0400367
0400451
KIT-GLAD HAND
RECEPTACLE BOOT
FITTING, BLKHD CONNECT
HD 7 WAY TRAILER CONNECT
QUICK DISCONNECT 1/2 FPT
1/4-20X1 HHCS GR5 ZP
1/4-20 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
1
2
1
2
2
2
2
--
89
90
91
92
93
94
95
0904183
0301577
0302495
0311193
0400062
0700188
0909085
HA0132
KIT-AIR TENSIONER
1/4 OD PLASTIC AIRLINE, BLACK
CONVOLUTED LOOM 1/4
6" CABLE TIE
1/4-20X3/4 THRD CUT HEX
BRKT,BULKHEAD
KIT,AIR FLR/REG/LUBE COMBO 1/4
GAUGE 0-160 PSI
25
25
25
2
2
1
1
--
96
97
98
99
0909085
0302123
0303363
0306983
9010520
KIT,AIR FLR/REG/LUBE COMBO 1/4
HEX NIPPLE 4MP-4MP
AIR FLTR/REGULATOR COMBO
FITT, BRASS RUNTEE 1/4T-1/4MPX
FITT, BRASS ELB 1/4T-1/4MP
1
1
1
1
--
100
101
102
103
104
105
0906838
0400126
0400392
0400481
0400499
0402122
0716468
GROUND KIT MTG.HARNESS CENTURY
3/8-16X1 HHCS GR5 ZP.
3/8-16 NYLOK HEX NUT ZINC
3/8" EXT.TOOTH LOCKWASHER
3/4" EXT.TOOTH LOCKWASHER
3/8-16NC HEX NUT 316 SS
LUG - GROUNDING
1
1
1
1
1
1
--
106
107
108
109
110
111
0907043
0307052
0400201
0400407
0400491
0400492
0400506
KIT, HOLE PLUG TO0L BOX
WASHER, RUBBER 7/16X1 1/4X1/4
1/2-13X1.5 CRGBLT GR5 ZP
1/2-13 HEX NUT ZP
1/2" HCL LKWSHR ZP
1/2" FLATWASHER ZP
5/8 FLATWASHER ZP
8
4
4
4
4
4
--
112
113
0908095
0300364
0300649
KIT - PUMP 9055
CLAMP-HOSE,0.875"-2.75" 50"LBS
UNION, STRAIGHT 12MJ - 12MJ
4
2
I-34
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
114
115
116
117
118
119
120
121
122
123
124
125
126
0908095
0300666
0300671
0300891
0302088
0302242
0302901
0302932
0303290
0400126
0400177
0400392
0400480
0400491
KIT - PUMP 9055 (cont'd)
FITTING, BARB 24C4-24MP
HOSE, SUCTION 1-1/2 ID
PIPE NIPPLE, 1-1/2 X 3
BALL VALVE
FITT, FLANGE 24 HOSE-24FL90
HOSE HYD, 120" 12C12
FITTING, ELBOW
INSULATED CLAMP 2 1/2
3/8-16X1 HHCS GR5 ZP.
1/2-13X1.25 HHCS GR5 ZP
3/8-16 NYLOK HEX NUT ZINC
3/8 FLATWASHER ZP
1/2" HCL LKWSHR ZP
2
38
2
2
2
4
2
12
6
4
6
6
4
--
127
128
129
130
131
132
133
0908382
0310631
0400103
0400148
0400382
0400392
0717386
0718139
KIT - MUDFLAP LRG CENTURY WKR
MUD FLAP, CENTURY
5/16-18X1.25 HHCS GR5 ZP
3/8-16X1.25 HHCS GR5 ZP
5/16-18 NYLOK HEX NUT ZP
3/8-16 NYLOK HEX NUT ZINC
BAR - MUDFLAP
ANGLE - MUD FLAP MOUNT
2
8
4
8
4
2
2
--
134
135
0908446
0501647
9024041
KIT, SWITCH/DECALS 2-SPD WINCH
DECAL, 2-SPEED
SWITCH-ROCKER, LIGHTED 12V
2
4
--
136
137
138
139
0908031
0903156
0903902
0911092
0911095
BSC UNIT ASSY 9055 2/SPD 3STG
CROSSBAR-5" ASSY
BOOM HORIZONTAL ASSY
9055 3STG2SP PURC ASY LESS W/L
9055 3STG DATA PKG
1
1
1
1
--
140
141
142
143
144
145
146
147
148
149
150
0903156
0301197
0301398
0301822
0303097
0303098
0400271
0400508
0708470
0710051
0710052
0802914
CROSSBAR-5" ASSY
COMP.SPRING,CROSS BAR,FI
STEEL BALL, 1-3/16 DIA
O-RING - PIVOT PIN1
THRUST WASHER - 1/8 THK
THRUST WASHER - 1/16 THK
5/8-11X4.5SKTHDCAPSCREW
5/8" HELICAL LCKWSHR ZP
SPACER - DETENT BALL SPRG
PIN - TOP HALF PIVOT
PIN - BOTTOM HALF PIVOT
CROSSBAR WELDMENT
--
151
152
0903902
0300113
0301470
BOOM HORIZONTAL ASSY
GREASE FITTING,1/4-28 STRAIGHT
FITTING, 90ELB 6MJ-8MB90
I-35
1
1
1
1
2
2
1
1
1
1
8
2
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
0903902
0301817
0301818
0302538
0303501
0307013
0400139
0400151
0400204
0400228
0400392
0400481
0400990
0707034
0712195
0718764
0719515
0803440
0803441
0903901
BK2003
BOOM HORIZONTAL ASSY (cont'd)
SLIDE PAD-HORIZ BOOM NYL
SLIDE PAD-HORIZ BOOM
BUSHING - U/L
CYL HYD EXT-3M U/LIFT H/CHROME
PAD - WEAR
3/8-16X1.5 HEX SKT SET
3/8-24X3/4 HHCS GR5 ZP
1/2-13X3/4 SKT HD SET
3/8-24X5/8 BUTTON HEAD
3/8-16 NYLOK HEX NUT ZINC
3/8" EXT.TOOTH LOCKWASHER
SET SCRW,1/2-13X1/2 SKT,CUP PT
PLATE,STOP
SHAFT - EXTEND CYLINDER
SHAFT - EXTEND CYL
PLATE, STOP
BOOM,U/L OUTER WLMT
BOOM-2ND STAGE U/L WELDMENT
BOOM-U/L INNER ASSY
PAD-WEAR
3
2
2
1
2
2
6
4
4
2
6
4
2
1
1
1
1
1
1
2
--
173
174
175
176
0903901
0303088
0400044
0703277
0803442
BOOM-U/L INNER ASSY
BUSHING - PIVOT PIN
10X1/2 DRIVE SCREW RD
PAD, SLIDER
BOOM-U/L INNER WELDT 3RD STAGE
1
8
2
1
--
177
178
179
180
0911092
0907057
0907313
0908019
0911093
9055 3STG2SP PURC ASY LESS W/L
WINCH ASSY 9055 W/2-SPD WINCH
SUBFRAME ASSY - 9055
BOOM INSTALLATION 9055 3-STAGE
9055 TOWER LESS U/L ASSY
1
1
1
1
--
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
0907057
0301577
0301601
0302495
0303079
0303505
0310194
0311193
0400121
0400284
0400430
0400510
0709702
0709703
0709704
0709705
WINCH ASSY 9055 W/2-SPD WINCH
1/4 OD PLASTIC AIRLINE, BLACK
CLAMP, HOSE, INSUL, 5/8
CONVOLUTED LOOM 1/4
FITTING, CONNECTOR
WINCH-DP MODEL S50-50K (2)SPD
HARNESS, WIRING 2-SPEED
6" CABLE TIE
3/8-16X3/4 HHCS GR5 ZP
3/4-10X2.25" HHCS GR5 ZP
3/4-10 NYLOK HEXNUT ZP
3/4 FLATWASHER ZP
ANGLE - WINCH MTG 9055
ANGLE - WINCH MTG 9055
ANGLE - WINCH MTG 9055
ANGLE - WINCH MTG 9055
70
1
70
4
2
1
35
1
16
16
16
2
2
2
2
I-36
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
196
197
198
0907057
0711164
9010520
9011071
WINCH ASSY 9055 W/2-SPD WINCH
BLOCK - SHEAR
FITT, BRASS ELB 1/4T-1/4MP
FITT, BRASS TEE 1/4T-1/4T-1/4T
8
2
1
--
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
0907313
0302538
0400070
0400288
0400367
0400431
0711164
0711287
0712522
0714581
0804405
0806001
0902553
0903514
0903516
0903528
0906313
0907138
0907140
0907288
0907289
0907347
0907802
SUBFRAME ASSY - 9055
BUSHING - U/L
1/4-20X1 HHCS GR5 ZP
3/4-10X2.5HHCS GR 8GOLD
1/4-20 NYLOK HEX NUT ZP
3/4-10 NYLOK HEX GR 8 ZP
BLOCK - SHEAR
PLATE - BULKHEAD
BAR
PLATE - BOLTING
BRACKET - BOOM PIVOT
SUBFRAME WELD'T - 7035/9055
KIT-D RING LARGE
KIT-LIFT CYLINDER 9055
KIT-FRAME HYDRAULIC 9055
LINK-LT.&RT. SIDE CONT.
SPADE ASSY - REAR HYDRAULIC
PAN-VALVE ASSY. -9055
KIT-VALVE COVER 9055
CONTROL ASSY (9) HANDLES
RIGHT CONTROL ASSY-(6 HANDLE)
KIT - REAR HANDRAIL
KIT - RESERVOIR 5130-9055
2
2
12
2
12
2
1
4
4
2
1
1
1
1
1
1
1
1
1
1
1
1
--
221
222
223
224
0902553
0400114
0400776
0719585
GA0215
KIT-D RING LARGE
5/16-18X3 HHCS GR5 ZP
5/16-18 HEX NUT JAM NYLOK ZP
D-RING, TOWING
PIN-"D" RING
2
2
2
2
--
225
226
227
228
229
230
231
232
233
234
235
236
237
238
0903514
0300041
0300113
0300644
0300657
0300659
0301388
0302275
0302276
0302568
0302792
0302796
0307106
0307107
0307613
KIT-LIFT CYLINDER 9055
FITTING, CONNECTOR 8MJ-8MB
GREASE FITTING,1/4-28 STRAIGHT
HOSE CLAMP,8 68452/I
HOSE HYD, 46" LG
HOSE HYD, 45"
FITTING, 90ELL, 8MJ-8MB90
FITTING, CONN 8MJ-6MB W/STEP
FITTING, ELB 90 DEG
HYD TUBING
CYL HYD HEAVY/CHROME
FITTING, TEE
FITT, CONNECTOR 4MB-6FB
VALVE, HOLDING 4000 PSI SAE
TUBING-HYD ASSY 1/2" DIA 9055
2
4
2
2
2
2
2
4
2
2
2
2
2
2
I-37
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
239
240
241
242
243
244
245
0903514
0400078
0400206
0400367
0400408
0400451
0703001
0708094
KIT-LIFT CYLINDER 9055 (cont'd
1/4-20X2 HHCS GR5 ZP
1/2-13X5 HHCS GR5 ZP
1/4-20 NYLOK HEX NUT ZP
1/2-13 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
BRKT,MTG,CHECK VALVE
PIN - LIFT CYLINDER
4
2
4
2
4
2
2
--
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
0903516
0301093
0301372
0301473
0301837
0301965
0302552
0302574
0302576
0302584
0302805
0302835
0302836
0302837
0303036
0303339
0303341
0303342
0303344
0303345
0303346
0303347
0303348
0303354
0303355
0303562
0303563
KIT-FRAME HYDRAULIC 9055
BULKHEAD UNION,3/4" JIC
FITTING, ST.CONN. 12FJ-8MJ
HOSE HYD, 18" LG
INLINE ORIFICE
HOSE HYD, 131"
C-WA-10 WELD ADAPTER
FITTING-BULKHEAD RUN TEE
FITTING, BULKHEAD UNION
HOSE HYD, 50"
HOSE HYD, 10"
C-WA-10 WELD ADAPTER
SOCKET-HD STACKING NUTS
SPLIT BUSHING 1"
8 FJ CAP
HOSE HYD, 45" LG
HOSE HYD, 36" LG
HOSE HYD, 30" LG
HOSE HYD, 46" LG
HOSE HYD, 48" LG
HOSE HYD, 48" LG
HOSE HYD, 50" LG
HOSE HYD, 48" LG
HOSE HYD, 33" LG
HOSE HYD, 33" LG
HOSE HYD, 37"
HOSE HYD, 27"
6
2
2
1
2
2
2
8
2
1
4
2
4
2
2
2
6
2
2
1
1
2
1
1
1
1
--
272
273
274
275
276
277
278
279
280
281
0903528
0303008
0400103
0400122
0400382
0400383
0400392
0400466
0711249
0711250
0801054
LINK-LT.&RT. SIDE CONT.
ADJUSTABLE CLEVIS
5/16-18X1.25 HHCS GR5 ZP
3/8-16X1.25 HHCS GR5 ZP
5/16-18 NYLOK HEX NUT ZP
5/16-24 HEX NUT ZP
3/8-16 NYLOK HEX NUT ZINC
5/16 INT.TOOTH LOCKWSHR
PLATE - CONTROL BULKHEAD
PLATE - CONTROL BULKHEAD
CONNECTOR-CONTROL CABLE
3
9
6
9
12
6
47
2
1
6
I-38
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
0906313
0300044
0300134
0301861
0303748
0307843
0400066
0400139
0400392
0400452
0713128
0713129
0715584
0715694
0804334
0807627
0807628
0807630
9046354
SPADE ASSY - REAR HYDRAULIC
FITT, HYD CONN. 6MJ-8MB
CLAMP, 1" HOSE INSULATED
QUICK PIN,LINCH -B7932 PL 7/16
HOSE HYD, 136
CYL, HYD TI-S40030032PPBZ
1/4-20X3/4 HHCS GR5 ZP
3/8-16X1.5 HEX SKT SET
3/8-16 NYLOK HEX NUT ZINC
1/4" HELICAL LCKWASHR ZP
SHAFT - LOWER SPADE
SHAFT - UPPER SPADE
PLATE - REAR SPADE COVER
PIN - SPADE PIVOT
PIN - MULTI-POSITION
INNER SPADE WELD'T LH
INNER SPADE WELD'T RH REINF
LOWER SPADE PAD WLMT
SPRING PIN 1/4 X 2-1/2
4
12
2
4
2
8
4
10
8
2
2
2
2
2
1
1
2
2
--
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
0907138
0300044
0301376
0301470
0301545
0301730
0301778
0302083
0302296
0302826
0302827
0302829
0303176
0307062
0400078
0400109
0400132
0400135
0400367
0400382
0400392
0400451
0400480
0704045
0717827
0719122
GX263
PAN-VALVE ASSY. -9055
FITT, HYD CONN. 6MJ-8MB
CONNECTOR 8 MJ - 10 MB
FITTING, 90ELB 6MJ-8MB90
FITTING, ELB 12MJ-12MB 90
VALVE, DOUBLE HOLDING
6MJ - 10MB STRAIGHT CONNECTOR
16 MJ - 12 MB 90 ELBOW
VALVE, 3 SPOOL
FITTING, TEE
FITTING, CONNECTOR 10MJ-10MB
FITTING, ADAPTOR
FITTING, CONNECTOR
VALVE, 6 SPOOL VDP12-CDDDDC
1/4-20X2 HHCS GR5 ZP
5/16-18X1 HHCS GR5 ZP
3/8-16X1.5 HHCS GR5 ZP
3/8-16X4.5 HHCS GR5 ZP
1/4-20 NYLOK HEX NUT ZP
5/16-18 NYLOK HEX NUT ZP
3/8-16 NYLOK HEX NUT ZINC
1/4 FLATWASHER ZP
3/8 FLATWASHER ZP
SPACER-CONTROL VALVE
PLATE, VALVE MOUNTING
PLATE - VALVE MTG
FITTING, ELB 10MJ-10MB90
5
4
2
2
1
7
2
1
2
2
2
3
1
2
2
4
6
2
2
10
2
4
6
1
1
2
--
326
0907140
0400121
KIT-VALVE COVER 9055
3/8-16X3/4 HHCS GR5 ZP
4
I-39
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
327
328
329
0907140
0400482
0717066
0807181
KIT-VALVE COVER 9055 (cont'd)
3/8" HELICAL LCKWSHR - ZP
COVER - VALVE
COVER, SUPPORT WELDMENT
4
1
4
--
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
0907288
0301473
0302205
0302457
0302726
0303427
0400107
0400109
0400382
0400393
0400451
0400512
0400527
0711235
0717198
0717461
0806006
0806007
0907441
FC41
CONTROL ASSY (9) HANDLES
HOSE HYD, 18" LG 2
GAUGE, FLUSH MNTG-6000 PSI
CABLE, CONTROL 104
GREASE FITTING, 1/4-28 X 45DEG
CABLE, CONTROL 114"
5/16-18X2.5 HHCS GR5 ZP
5/16-18X1 HHCS GR5 ZP
5/16-18 NYLOK HEX NUT ZP
3/8-16 HEX NUT JAM ZP
1/4 FLATWASHER ZP
3/4 FLAT WASHER(SPECIAL)
CLEVIS PIN, 5/16X1"X5/8"GRIP
CLAMP - SHAFT CONTROL BOX
PIN - CONTROL HANDLE (9)
PLATE - SUPPORT SHAFT
CLEVIS WELD'T
CONTROL FRAME WELD'T-(9) HANDL
CONTROL HANDLE ASSY - SHORT
FITTING-90DEG BLKHD ELB
2
3
9
6
4
4
8
9
8
2
9
2
1
2
9
1
9
2
--
349
350
0907441
0806515
9053524
CONTROL HANDLE ASSY - SHORT
CONTROL HANDLE WELD'T
BEARING BR. FLG.752 X .879X.75
1
2
--
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
0907289
0302457
0302726
0303427
0400107
0400109
0400382
0400451
0400512
0400527
0711235
0717203
0717206
0717461
0806006
0806008
0907441
RIGHT CONTROL ASSY-(6 HANDLE)
CABLE, CONTROL 104
GREASE FITTING, 1/4-28 X 45DEG
CABLE, CONTROL 114"
5/16-18X2.5 HHCS GR5 ZP
5/16-18X1 HHCS GR5 ZP
5/16-18 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
3/4 FLAT WASHER(SPECIAL)
CLEVIS PIN, 5/16X1"X5/8"GRIP
CLAMP - SHAFT CONTROL BOX
PIN - CONTROL HANDLE (6)
TUBE - 1.25 OD SPACER
PLATE - SUPPORT SHAFT
CLEVIS WELD'T
CNTRL FRAME WELD'T-(6,7,8 HND)
CONTROL HANDLE ASSY - SHORT
2
6
4
4
2
6
6
2
6
2
1
1
1
6
1
6
--
367
0907441
0806515
CONTROL HANDLE ASSY - SHORT
CONTROL HANDLE WELD'T
1
I-40
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
368
0907441
9053524
CONTROL HANDLE ASSY - SHORT (cont'd)
BEARING BR. FLG.752 X .879X.75
2
--
369
370
371
0907347
0400148
0400392
0806521
KIT - REAR HANDRAIL
3/8-16X1.25 HHCS GR5 ZP
3/8-16 NYLOK HEX NUT ZINC
HAND RAIL WELD'T
6
6
2
--
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
0907802
0300287
0300364
0301350
0301894
0302227
0302228
0302570
0302756
0303155
0303338
0305006
0307344
0400122
0400149
0400150
0400392
0400480
0706114
0802747
0803193
0806653
0806654
KIT - RESERVOIR 5130-9055
FITTING, PIPE BUSHING, 1.25X1
CLAMP-HOSE,0.875"-2.75" 50"LBS
PIPE, 1-1/2 CLOSE NIPPLE
SPIN-ON FLTR ASSY
CENTER BONDED MOUNT
SPECIAL WASHER (LORD
SIGHT GAUGE 3/4 NPT (SVM-12)
SUCTION HOSE,1-1/4IDX100 100R4
PIPE PLUG 3/4 NPT MAGNETIC
FITTING, ELBOW
FILLER CAP (GO205,FB194)
SUCTION STRAINER
3/8-16X1.25 HHCS GR5 ZP
3/8-16 X 5/8 HHCS GR5 ZP
3/8-16X2.5 HHCS GR5 ZP
3/8-16 NYLOK HEX NUT ZINC
3/8 FLATWASHER ZP
GSKT-CLEANOUT&FLLR COVER
PIPE-FILLER WLMT
SUPPORT-RESERVOIR WLDMT.
RESERVOIR-LEFT WELDMENT
RESERVOIR-RIGHT WELDMENT
1
2
2
2
2
4
4
2
2.25
2
2
2
2
8
24
4
12
24
2
2
2
1
1
--
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
0908019
0302504
0302514
0302548
0302549
0302551
0302552
0302835
0302836
0302837
0303350
0303351
0303352
0400118
0400176
0400211
0400220
0400392
BOOM INSTALLATION 9055 3-STAGE
HYD TUBING
ADAPTER 8MJ-6MJ
CLAMPING UNIT(SET) HC-10-6
SPLIT BUSH.RUBBER C-SB10-8 1/2
C-SN-10 SOCKET-HEAD
C-WA-10 WELD ADAPTER
C-WA-10 WELD ADAPTER
SOCKET-HD STACKING NUTS
SPLIT BUSHING 1"
HOSE HYD, 89" LG
HOSE HYD, 105" LG
HOSE HYD, 117" LG
5/16-18X3/4 HHCS GR5 ZP
1/2-13X1 HHCS GR5 ZP
1/2-13X1.75 HHCS GR5 ZP
1/2-13X5.5" HHCS GR5 ZP
3/8-16 NYLOK HEX NUT ZINC
6
6
4
24
8
11
3
3
6
2
1
1
11
2
2
1
4
I-41
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
411
412
413
414
415
416
417
418
419
0908019
0400408
0400492
0705104
0715953
0802463
0906533
0907122
0908357
DE1381
BOOM INSTALLATION 9055 3-STAGE (cont'd)
1/2-13 NYLOK HEX NUT ZP
1/2" FLATWASHER ZP
PLATE-WINCH CABLE SPPT.
PIN - BOOM PIVOT
PIN-LIFT CYL. PIVOT WLMT
KIT - BOOM SWIVEL
KIT-9055 TILT CYLINDER
BOOM ASSEMBLY 9055 (3-STAGE)
1/2 WASHER SAE 17/32 ID
4
2
2
1
2
1
1
1
2
--
420
421
0906533
0400557
0906535
KIT - BOOM SWIVEL
1/2X1-1/4 ROLL PIN ZP
SWIVEL-BOOM ASSEMBLY
6
2
--
422
423
424
425
426
427
428
429
430
0906535
0300113
0300311
0400133
0400140
0400392
0700511
0700563
0802027
0804450
SWIVEL-BOOM ASSEMBLY
GREASE FITTING,1/4-28 STRAIGHT
SHEAVE, 12-10-1BB 10
3/8-16X3 HHCS GR5 ZP
3/8-16X4 HHCS GR5 ZP
3/8-16 NYLOK HEX NUT ZINC
GUIDE, BOTTOM CABLE
SHAFT,SHEAVE
GUIDE-CABLE WELDMENT
BOOM END SWIVEL WLDT-FIXED9055
1
1
2
1
3
2
1
1
1
0907122
0300108
0300113
0301470
0301619
0301620
0302035
0302805
0302842
0302914
0302915
0303079
0303563
0307105
0307106
0307107
0400064
0400206
0400366
0400408
0400451
0400452
0703001
0708124
KIT-9055 TILT CYLINDER
SNAP RING, 2.5 5100-250
GREASE FITTING,1/4-28 STRAIGHT
FITTING, 90ELB 6MJ-8MB90
FITT, 6MJ-6MJ-6MB BRANCH TEE
FITTING, HYD. 6MJ - 6MB90
HOSE HYD, 18" 6FJX-6FJX -6M1T
HOSE HYD, 10"
FITTING, TEE
HOSE HYD, 35"
HOSE HYD, 12"
FITTING, CONNECTOR
HOSE HYD, 27"
CYLINDER, HYD.
FITT, CONNECTOR 4MB-6FB
VALVE, HOLDING 4000 PSI SAE
1/4-20X2.25 SLOTTED RD
1/2-13X5 HHCS GR5 ZP
1/4-20 HEX NUT ZP
1/2-13 NYLOK HEX NUT ZP
1/4 FLATWASHER ZP
1/4" HELICAL LCKWASHR ZP
BRKT,MTG,CHECK VALVE
PIN - TILT CYLINDER BASE
2
4
2
1
2
1
1
2
1
2
4
1
2
1
1
2
2
2
2
2
2
1
1
--
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
I-42
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
--
454
PART NUMBER
0907122
0717095
DESCRIPTION
QTY
KIT-9055 TILT CYLINDER (cont'd)
SHAFT
1
BOOM ASSEMBLY 9055 (3-STAGE)
GREASE FITTING,1/4-28 STRAIGHT
HOSE HYD, 58
GREASE FITTING,STR 1/8 PTF
3/8" OD AIRLINE,SYNFLEX HOSE
C-WA-10 WELD ADAPTER
PAD, SLIDE - (3) STAGE 9055
1/4-20X5/8 HHCS GR5 ZP
3/8-16X3/4 HHCS GR5 ZP
3/8-16X3/4 FLT SOC HD
1/4" HELICAL LCKWASHR ZP
INNER BOOM TUBE WLMT 9055
BOOM, OUTER WELD'T
BOOM, MID STAGE WELD'T
SLIDE PAD ASSY (9055 3 STAGE)
BOOM EXTEND SYSTEM 9055 3STAGE
SLIDE PAD ASSY (9055 3 STAGE)
KIT-D RING BOOM
PLATE - LUBE MTG.
CONNECTOR-MALE 3/8TUBEX1
CONNECTOR-MALE 3/8TUBEX1
BULKHEAD ADAPTER 1/8M-1/8F NPT
ELBOW-1/4NPT X 3/8TUBE 9
WEAR PAD - LOWER
UPPER WEAR PAD-RECOVERY
1
4
2
1
15
11
1
2
5
4
2
1
1
1
4
1
2
1
1
1
1
1
1
1
2
--
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
0908357
0300113
0301529
0301895
0301949
0302552
0307406
0400059
0400121
0400349
0400452
0806712
0806716
0806824
0908028
0908119
0908356
0908430
3012-793001
9012549
9012549
9012552
9012584
916040004
946030004
--
479
480
481
482
483
484
485
486
0908028
0306825
0400066
0400126
0400451
0400452
0400482
0717262
0717746
SLIDE PAD ASSY (9055 3 STAGE)
SLIDE PAD - 3/4 X 1 X 4
1/4-20X3/4 HHCS GR5 ZP
3/8-16X1 HHCS GR5 ZP.
1/4 FLATWASHER ZP
1/4" HELICAL LCKWASHR ZP
3/8" HELICAL LCKWSHR - ZP
SHIM - SLIDE PAD 2
PLATE, SLIDE PAD SUPPORT
--
487
488
489
490
491
492
493
494
495
496
0908119
0300113
0301388
0305023
0307160
0307402
0307403
0400146
0400223
0400264
0400390
BOOM EXTEND SYSTEM 9055 3STAGE
GREASE FITTING,1/4-28 STRAIGHT
FITTING, 90ELL, 8MJ-8MB90
SNAP RING 5100-0225PP
CABLE - EXT ASSY 3-STAGE BOOM
CYL HYD 6.5 BORE 3-STAGE 9055&
CABLE - ASSY (RETRACT) 3-STAGE
3/8-16X2.25 HHCS GR5 ZP
3/8-16X3/4 FL HEAD
5/8-11X2.25 HHCS GR5 ZP
3/8-16 HEX JAM NUT W/PELLET
I-43
1
1
5
1
1
5
1
4
2
2
2
1
2
1
4
4
1
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
PART NUMBER
DESCRIPTION
QTY
--
497
498
499
500
501
502
503
504
505
506
507
508
509
510
0908119
0400421
0400448
0400461
0400471
0400472
0400473
0400480
0400501
0717744
0717747
0806752
0908022
0908118
GA0215
BOOM EXTEND SYS 9055 3STAGE (cont'd)
5/8-11 NYLOK HEX NUT ZP
1.25-12X1/2 HEX JAM NUT
NUT, HEX 1.25-12 GR8 PL
NUT, HEX 7/8-14 UNF GR8 ZP
NUT, JAM 7/8-14 UNF GR8 ZP
WASH, FLAT 7/8" PL HARD'N
3/8 FLATWASHER ZP
WASH, SAE 1 1/4 HARDENED PL
PIN, EXTEND CYL. BASE
PIN, RETRACT CABLE
SHAFT-RETRACT SHEAVE WELD'T
EXTEND SHEAVE ASSY 9055 3STAGE
SHEAVE ASSY 5" DIA
PIN-"D" RING
4
2
2
2
2
2
6
2
1
1
4
1
4
1
--
511
512
513
514
515
516
517
518
519
0908022
0300113
0303441
0400177
0400223
0400483
0400491
0717743
0806721
0806722
EXTEND SHEAVE ASSY 9055 3STAGE
GREASE FITTING,1/4-28 STRAIGHT
SHEAVE-10" DIA X 1.5 BORE
1/2-13X1.25 HHCS GR5 ZP
3/8-16X3/4 FL HEAD
3/8 CNTR'SUNK LOCKWASHER
1/2" HCL LKWSHR ZP
ROD, EXTEND SHEAVE SPACER
BRKT WELD'T - EXTEND SHEAVE
SHAFT - EXTEND SHEAVE WELD'T
2
2
4
1
1
4
2
1
1
--
520
521
0908118
0307432
0717909
SHEAVE ASSY 5" DIA
BUSHING - BRONZE
SHEAVE, 5" DIA RETRACT
1
1
--
522
523
524
525
526
527
528
0908356
0303490
0400066
0400349
0400451
0400452
0717262
0718134
SLIDE PAD ASSY (9055 3 STAGE)
PAD-WEAR 1/2" X 1" X 4"
1/4-20X3/4 HHCS GR5 ZP
3/8-16X3/4 FLT SOC HD
1/4 FLATWASHER ZP
1/4" HELICAL LCKWASHR ZP
SHIM - SLIDE PAD
PLATE - SLIDE PAD SUPPORT
1
1
5
1
1
2
1
--
529
530
531
532
0908430
0400114
0400776
0719585
GA0215
KIT-D RING BOOM
5/16-18X3 HHCS GR5 ZP
5/16-18 HEX NUT JAM NYLOK ZP
D-RING, TOWING
PIN-"D" RING
1
1
1
1
--
533
534
535
0911093
0300113
0301601
0301620
9055 TOWER LESS U/L ASSY
GREASE FITTING,1/4-28 STRAIGHT
CLAMP, HOSE, INSUL, 5/8
FITTING, HYD. 6MJ - 6MB90
2
4
2
I-44
Section I - PARTS (cont'd)
9055 3-STAGE 2-SPEED PARTS LIST (cont'd)
ITEM
--
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
--
564
565
566
567
568
--
569
570
PART NUMBER
0911093
0301662
0302538
0302911
0306746
0306870
0307420
0400122
0400132
0400176
0400196
0400392
0400480
0400482
0400491
0706432
0710450
0713217
0714762
0717657
0717851
0802459
0802460
0802461
0804483
0805960
0806756
0906572
DE1381
0906572
0400257
0400421
0804483
9048800
945030007
0911095
0400002
0501441
DESCRIPTION
QTY
9055 TOWER LESS U/L ASSY (cont'd)
HOSE HYD, 120" 6M1T 6FJX-6FJX
BUSHING - U/L
HOSE HYD, 88"
CYL HYD - FOLD
HOSE HYDR - 96"
SLEEVE, NYLON PROTECTIVE-24HG
3/8-16X1.25 HHCS GR5 ZP
3/8-16X1.5 HHCS GR5 ZP
1/2-13X1 HHCS GR5 ZP
1/2-13X1.25 SOCKET HD
3/8-16 NYLOK HEX NUT ZINC
3/8 FLATWASHER ZP
3/8" HELICAL LCKWSHR - ZP
1/2" HCL LKWSHR ZP
BLOCK - STOP
BAR - RETRACT
BAR
BAR - RETAINER
PLATE, STOP BLOCK SUPRT
BLOCK, STOP
PIN-FOLD CYL. WLDMT
PIN-TOWER PIVOT WLDMT
PIN-UNDERLIFT PIVOT WLMT
CABLE TIE BACK WLMT
TOWER WELDT - 9055
PIN WELD'T - FOLD CYLINDER
KIT-WINCH CABLE STOW
1/2 WASHER SAE 17/32 ID
2
2
1
1
1
2
1
1
1
4
1
1
1
1
2
2
6
2
2
2
1
2
1
2
1
1
2
1
KIT-WINCH CABLE STOW
5/8-11X3.25 HHCS GR5 ZP
5/8-11 NYLOK HEX NUT ZP
CABLE TIE BACK WLMT
5/8 WELDLESS CHAIN LINK
CABLE TIE BACK SPRING-1
1
1
1
1
1
9055 3STG DATA PKG
4X1/4 DRIVE SCREW RD HD
PLATE-SERIAL & DATA 9055/CH-50
4
1
I-45
Section I - PARTS (cont'd)
LOWRIDER (9055) PARTS LIST
ITEM
PART NUMBER
125956033
0908114
DESCRIPTION
QTY
9055 LOW RIDER 3 STAGE 2-SPD
9055 2/SPD 3STG BUA
1
0908114
0903156
0908270
0911092
0911095
9055 2/SPD 3STG BUA
CROSSBAR-5” ASSY
ASSEMBLY - LOWRIDER (9055)
9055 3STG2SP PURC ASY LESS W/L
9055 3STG DATA PKG
1
1
1
1
0908270
0300113
0302538
0303968
0307425
0307460
0400079
0400086
0400139
0400181
0400249
0400344
0400392
0400491
0400594
0400749
0400749
0717869
0717871
0717872
0717873
0718087
0718096
0724419
0806808
0806812
0806814
0908282
9012594
930150003
ASSEMBLY - LOWRIDER (9055)
GREASE FITTING,1/4-28 STRAIGHT
BUSHING - U/L
HOSE HYD, 10” LG
CYL, HYD - U/L BOOM EXTEND
FITTING, HYD 6MJ-6MB90LL
1/4-20X3/4 FL SKTSCR GR5
1/4-20X1.25 FLTHDSKTCPSC
3/8-16X1.5 HEX SKT SET
1/2-13X1.5 HHCS GR5 ZP
5/8-11X1.25” SOC HD CAP S
1/2-13X3/4 LG FLAT HD SOCKET 8
3/8-16 NYLOK HEX NUT ZINC
1/2” HCL LKWSHR ZP
1/4-20X5/8 SOC FLT HD
1/2-13x1.25 FLT HD SKT CAP SRW
1/2-13x1.25 FLT HD SKT CAP SRW
PLATE, SPACER (BOLT-ON)
PIN, CYLINDER ROD
PIN, EXTEND CYLINDER BASE
PIN, SHEAR OUTER BOOM
PLATE - PAD SPACER
BLOCK, STOP
PLATE-PLUG RETAINER
BOOM - OUTER WLD KIT
BRACKET - EXTEND CYLINDER
BOOM - 2nd STAGE WLMT
INNER BOOM ASSY
FITT,HYD RUN TEE, 6MJx6MBx6MJ
TOP PADS
1
6
2
2
2
2
8
4
1
5
2
8
1
5
4
5
8
4
1
1
2
2
2
2
1
1
1
1
2
6
0908282
0300113
0303088
0400483
0400594
0400653
0706996
0806813
930150003
INNER BOOM ASSY
GREASE FITTING,1/4-28 STRAIGHT
BUSHING - PIVOT PIN
3/8 CNTR’SUNK LOCKWASHER
1/4-20X5/8 SOC FLT HD
FLAT HD SOCKET SCRW 3/8-24 X 1
PAD, SPACER
BOOM - 3rd STAGE WLMT U/L
TOP PADS
2
1
4
4
4
1
1
2
I-46
NOTES
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement