N-GXE-PoE-xx-01 PCIe Gigabit Ethernet Fiber Network Interface Card with PoE+ Ordering Information

N-GXE-PoE-xx-01 PCIe Gigabit Ethernet Fiber Network Interface Card with PoE+ Ordering Information
PCIe Gigabit Ethernet Fiber Network Interface Card
with PoE+
1000Base-X and 10/100/1000Base-T PoE+
The N-GXE-PoE-xx-01 Network Interface Card (NIC) provides connectivity to
a secure fiber network while also delivering power to a PoE Powered Device
(PD), such as a VoIP phone with a copper UTP interface. It fully complies with
all IEEE 802.3z and 1000Base-X standards, providing up to 2000 Mbps fullduplex bandwidth capacity.
Developed to support high-end users, this (2) port NIC has (1) 1000Base-X
fiber network interface port (SFP version is 100/1000Base-X) and (1) switched
10/100/1000Base-T port supporting IEEE 802.3at PoE+ power. It is designed
to allow a PC to power a VoIP phone, or any other traditional copper Powered
Device, over a secure fiber network. Additionally, the NIC also has the ability
to provide traffic switching functions between the copper and fiber ports, even
when the PC is in a sleep mode.
Combining the functions of PC connectivity and VoIP phone connectivity into one device saves installation time, expense,
and the space of having two devices at the desktop. When the VoIP traffic is filtered and prioritized by third-party
devices like an Ethernet switch and the IP phone, this PoE NIC will pass all tagged traffic ensuring users experience a
high level of quality of service. VLANs and Prioritization can also be configured at the NIC via Transition Networks’ PoE
NIC utility software.
High bandwidth 1000Mbps
Supports Full-duplex Mode
Supports IEEE 802.3x Full-Duplex Flow
Supports PCIe x1 bus
IEEE 802.3-2000
IEEE 802.3z
IEEE 802.3x
IEEE 802.1Q
IEEE 802.1p
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
Compliant with PCIe Rev 2.1 Interface
MAC Address
8k MAC address table
Max Packet Size
Jumbo Frames, 10k bytes
Supports Jumbo Frames
Supports High Level VLAN Filtering
Jumper Switches
Legacy PoE
Energy Efficient Ethernet (EEE) enable/disable
Primary LPT Select
Supports IP headers and TCP/UDP
checksum offload
Status LEDs
RJ-45 Upper Lf
RJ-45 Upper Rt
Wake-on-LAN (WoL) power management
PXE 2.1 Boot ROM Supported
Width: 4.8” [121.9 mm]
Depth: 6.5” [165.1 mm]
Height: 0.9” [22.86 mm]
ACPI 2.0 Link Status LED for each port
Power Consumption
1.6 Watts (typical without PoE)
43.6 Watts (typical with PoE)
Low-profile bracket included
Driver Support
- Windows 7
- Windows 8.1
- Windows 10
- Windows Server 2008
- Windows Server 2012
Voltage input
PCIe 3.3V
12V Peripheral connection for PoE
Mode A Power
Operating: 0°C to 50°C
Storage: -15°C to 65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
2 lbs. [0.90 kg]
Emission: EN55022 Class B, CE
Immunity: EN55024
Available with a fixed LC port or an open
SFP port
Ordering Information
1000Base-SX 850nm multimode LC
[50/125um fiber: 550 m/1804 ft.]
[62.5/125 um fiber: 220 m/722 ft.]
Link Budget: 8.0 dB
Plus 10/100/1000Base-T PoE+
Gigabit Ethernet PCIe NIC with a
100/1000Base-X Open SFP fiber port, plus a
10/100/1000Base-t PoE+ port
Optional Accessories
SFP+ Modules
Cable assembly, 4 pin Molex to ATX Power
Cable Adapter
Cable assembly, 4 pin Molex to SATA 15 pin
Female Power Adapter
6” SATA Power Y Splitter Cable Adapter-M/F
3 piece cable kit for 12V power input
connectivity options
(Includes 27246, 28582, 28583)
Ethernet packet controller software utility used
for VLAN configuration within the NIC. Free
download from transition.com
Fiber Link/Activity
TP Link/Activity/Speed
TP Duplex
Transition Networks • Network Adapters Catalog | 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF