TOWN SQUARE CLASSIC CADDIE

TOWN SQUARE CLASSIC CADDIE
TOWN SQUARE®
CLASSIC CADDIE
FIRE CLAY/FURNITURE
TOWN SQUARE® CLASSIC CADDIE
• Traditional styled storage unit in a Cognac finish
• Can accommodate Town Square® Collection 24"
or 27" pedestal sink, both available in 4", 8", and
CHO faucet drillings
• Easy installation combined with hidden storage
• Design-matched to Town Square ® fixtures,
faucets and accessories
Nominal Dimensions with 24" Top:
24" x 20-1/4" x 35-1/2"
(610 x 514 x 902mm)
Nominal Dimensions with 27" Top:
27" x 21-1/4" x 35-1/2"
(686 x 540 x 902mm)
Separate Components:
❏ 0790.004 24" Pedestal top 4" (102mm) centers
❏ 0790.008 24" Pedestal top 8" (203mm) centers
❏ 0790.001 24" Pedestal top Center hole only
❏ 0780.004 27" Pedestal top 4" (102mm) centers
❏ 0780.008 27" Pedestal top 8" (203mm) centers
❏ 0780.001 27" Pedestal top Center hole only
To Be Specified:
❏ Pedestal Top Color: 0
20 White, 178 Black,
222 Linen, 021 Bone
❏ Town Square Faucet:
❏ Centerset Lavatory Faucet: 2555.201 (shown)
❏ Widespread Lavatory Faucet: 2555.801
❏ Other Lavatory Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ 9370.100 Classic Caddie only
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous Ceramic
• CAN/CSA B45 Series
* See faucet section for additional models available
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Cognac
© 2012 AS America Inc.
I-41
Revised 2/12
TOWN SQUARE®
CLASSIC CADDIE
FIRE CLAY/FURNITURE
TOWN SQUARE® CLASSIC CADDIE with
24" PEDESTAL TOP
FINISHED
WALL
4"
(102mm)
18-3/4" (476mm)
TOWN SQUARE® CLASSIC CADDIE with
27" PEDESTAL TOP
2-5/8"
(67mm)
FINISHED
WALL
4"
(102mm)
2-5/8"
(67mm)
20-1/4" (514mm)
9-5/8"
(244mm)
9-1/2"
(241mm)
21-1/4"
(540mm)
20-1/4"
(514mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
1-3/4" DIA.
STD. DRAIN
OUTLET
27"
(686mm)
24"
(610mm)
24"
(610mm)
27"
(686mm)
3-3/4"
(95mm)
3-3/4"
(95mm)
8"
(203mm)
8"
(203mm)
6"
(152mm)
6"
(152mm)
SUPPLIES AS
REQUIRED
*20"
(508mm)
*20"
(508mm)
1-1/4" O.D.
WASTE
*18"
(457mm)
16-1/8"
(410mm)
SUPPLIES AS
REQUIRED
35-1/2"
(902mm)
*18"
(457mm)
1-1/4" O.D.
28"
TAILPIECE (711mm)
14-1/8"
(359mm)
FINISHED
FLOOR
16-1/8"
(410mm)
35-1/2"
(902mm)
1-1/4" O.D.
WASTE
1-1/4" O.D.
28"
TAILPIECE (711mm)
14-1/8"
(359mm)
FINISHED
FLOOR
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
■ FOR REINFORCEMENT ONLY. TAKE ACTUAL DIMENSIONS FROM FIXTURE.
- SLAB/PEDESTAL ANCHORS AND MOUNTING FEATURES TO BE FURNISHED BY OTHERS.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2012 AS America Inc.
I-42
Revised 2/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement