Manual 10789447
Ultra HD 4x4 Matrix for HDMI
4K
CINEMA
60Hz, 4:2:0
DCI, 4096 x 2160
HDCP
Route four Hi-Def sources to four Ultra HD displays with FST, 3DTV, and 4K x 2K Ultra High-Definition support
The GefenToolBox 4x4 Matrix for HDMI 4K x 2K is a compact and lightweight alternative to rack-mounted matrixes. It allows up to four Ultra High Definition 4K or 1080p Full HD sources to
be routed to up to four Ultra HD displays. This product supports resolutions up to 4K (3840 x 2160 @ 60Hz 4:2:0 or 30Hz 4:4:4) and 4K Cinema (DCI) (4096 x 2160 @ 24 or 30Hz 4:4:4).
Deep Color, 3DTV pass-through, and lossless audio formats such as LPCM 7.1, Dolby® TrueHD, and DTS-HD Master Audio™ are also supported. Each Ultra Hi-Def source can be routed to
any of the connected displays using the front panel push-button controls, the included IR remote, RS-232 serial control interface, or through IP, using Telnet, UDP, and the built-in web server
interface. LED indicators on the top panel display the current routing status, FST mode, audio configuration, and EDID settings.
FST
Fast Switching Technology (FST) is a Gefen software implementation for HDMI products. FST eliminates the lengthy HDMI authentication process, and allows connecting/disconnecting or
turning ON / OFF of HDTV displays without having these activities affect other displays in the same distribution system.
3840
How It Works
4K Ultra HD
Connect up to four Ultra Hi-Def sources to the HDMI inputs on the matrix, using HDMI cables. Connect up to four Ultra HD
displays to the HDMI outputs. Connect an Ethernet cable from the network to the RJ-45 connector to use the built-in web server or
Telnet/UDP capability to control routing, EDID management, and other functions. Connect an RS-232 cable between an
automation control device such as Gefen EXT-PACS or GTB-MINI-PACS and the matrix. Connect the included locking power
supply to the matrix and to an available electrical outlet. Apply power to the sources and displays. The HD sources
can now be routed to the displays using the front panel push-buttons, IR remote control, RS-232, Telnet, UDP, or web server
interface.
Features*
1920
1080p
2160
1080
• Routes four Ultra Hi-Def sources to four Ultra HD displays
• Supports resolutions up to Ultra HD 4K (3840 x 2160 @ 60Hz 4:2:0 or 30Hz 4:4:4),
4K Cinema (DCI) @ 24 or 30Hz 4:4:4), and 1080p Full HD
• HDMI 2.0 compliant
• HDCP 1.4 compliant
• Supports 12-bit Deep Color (up to 1080p Full HD)
• 3DTV pass-through
• Lip Sync pass-through
• Push button controls for Routing, FST Modes, Audio, and EDID management
• FST Technology speeds up HDCP authentication process
• Advanced EDID Management for rapid integration of sources and displays
• Supports LPCM 7.1, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD Master Audio™
• Supports the use of DVI sources and DVI displays with HDMI-to-DVI adapters
(not included)
• RS-232 Serial interface for remote control via a computer or automation control system
• IP control via Telnet, UDP, and the built-in web server interface
• IR remote control
• Field-upgradeable firmware via Mini-USB and IP ports
• Locking Power Supply
• Surface-mountable
1080P
Specifications*
GTB-HD4K2K-444-BLK
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Maximum Pixel Clock: 300 MHz
HDMI Input Connectors: (4) Type A 19-pin female, locking
HDMI Output Connectors: (4) Type A 19-pin female, locking
USB Port: (1) Mini-B
RS-232 serial port: (1) DB-9, female
Ethernet (IP Control) Port: (1) RJ-45
Power Indicator: (1) LED, blue
FST Indicators: (2) LED, green
Audio Indicators: (2) LED, green
EDID Indicators: (3) LED, green
Routing Indicators: (16) LED, green
FST Selector: (1) tact-type, recessed push-button
Audio Selector: (1) tact-type, recessed push-button
EDID Selector: (1) tact-type, recessed push-buttons
Routing Selectors: (4) tact-type push-buttons
IR Sensor: (1), on front panel
IR Extender Port: (1) 3.5mm mini-stereo jack
DC Power Connector: (1) Locking type
Power Supply: 5V DC
Power Consumption: 13 Watts (max.)
Operating Temperature: +32 to 104 °F (0 to +40 °C)
Dimensions (W x H x D): 6.9” x 11.9“ x 1.0” (175mm x 302mm x 26mm)
Shipping Weight: 6 lbs. (2.7 kg)
Gefen, LLC | 20600 Nordhoff Street, Chatsworth CA 91311 | Tel. (818) 772-9100 (800) 545-6900 | Fax (818) 772-9120 | www.gefen.com
* Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners
Copyright© 2015 Gefen LLC.
VER A6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement