- Computers & electronics
- Audio & home theatre
- Video switches
- Pico Digital/ATX
- X-PS External Redundant Power Supply
- Specification
advertisement
XTC Series
QPSK / 8PSK to QAM Turbo Transmodulator
Features
• Tunes and demodulates QPSK/8PSK satellite signals in DVB-S, DVB-S2 modulation including DISH Turbo FEC
• Outputs 4 or 8 transponders of SD or
HD video in 4 or 8 QAM-RF channels
• Superior QAM performance with unequalized MER at 39dB, high output levels, and return loss >15dB
• Internal web server allows any PC to access web pages for easy configuration and simple local and remote operation
• DISH quick start wizard searches for
DISH signals for a quick install
• Dense with up to 8 channels in 1 RU, low power for low heat and long life
Rear View of XTC-8
SPECIFICATIONS
SATELLITE INPUTS (FROM LNB)
Frequency Range
MODULATION RATES
DVB-S
950-2150 MHz
1 to 45 Msps
1/2, 2/3, 3/4, 5/6, 7/8
QPSK: 1/2/, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5,2/3, ¾, 5/6, 8/9,9/10
8PSK Turbo, Turbo FEC QPSK 2 to 30 Msps
Input Level Per Carrier
2/3, 3/4, 4/5, 5/6, 8/9
–20 to –65 dBm
Acquisition Range
Tuner Step Size
Return Loss
±5 MHz
100 kHz
>9 dB
Impedance 75Ω
Connector F-Female
LNB Power and Control Output 11.5 to 14.0, 16.0 to 19.0 Volts, or Off/Blocked and 22kHz/Off
QAM-RF OUTPUTS
Output Frequency
Channel Bandwidth
50-1002 MHz
Four Channels, 6 to 8 MHz
16, 32, 64,128, 256 QAM Modulation Modes
QAM Types ITU-A (DISH/DVB)
QAM Symbol Rate
PCR Re-Stamping
Channel Plans
2.24~2.98, 4.48~7.0 Msps
Auto
EIA, HRC, IRC, Manual
Output Frequency Step Size
Baud Rate Step Size
Output Level (effective, per channel)
(combined, 4 channels)
Output Attenuation
>10 Hz
<1 Hz
>45 dBmV
>38 dBmV
0-10 dB (0.5 dB step)
(50-1002 MHz) ±0.75 dB
Spurious > 60 dBc
Output Impedance
Output Return Loss
75Ω
>15 dB
Output Connector
GENERAL
F Female
Ethernet 10/100Base-T
Ethernet Connector
Dimensions (WxDxH)
(1) RJ-45
19x19x1.75”
0°-40°C (32°-104°F)
5-100% (non-condensing)
Operating Temperature
Operating Humidity
POWER
AC Input
AC Power (4 QAM outputs)
(8 QAM outputs) 44 W
DC Input (varies with LNBs)
93-254 VAC, 47-63Hz
22 W
12V±5%, 4-8A
ORDERING INFORMATION
XTC-4 QPSK/8PSK to QAM Turbo Transmodulator - 4 Channel
XTC-8 QPSK/8PSK to QAM Turbo Transmodulator - 8 Channel
X-PS External Redundant Power Supply
Specifications Subject To Change Without Notice Rev 05-12 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project