Lataa esite oppilaitospaketeista

Lataa esite oppilaitospaketeista
SCE Guide Trainer Packages
Siemens Automation Cooperates with Education (SCE) | 03/2015
Unrestricted / © Siemens AG 2015. All Rights Reserved.
siemens.com/sce
Siemens Automation Cooperates with Education (SCE)
Simplify your education in automation
The Siemens SCE program offers a system for sustainable educational support which is unique worldwide.
As a technology leader, we support educational and R&D institutions with our excellent industrial know-how and a specific
range of services. We support secondary and tertiary education, as well as initial non commercial training departments in
the field of automation and drive technology.
Through cooperative partnerships, we help educators to plan their classes in
a targeted, practice-oriented manner and in compliance with the curriculum.
Overview of SCE services
• SCE Curriculums for classes
• SCE Trainer Packages for practice-oriented education
• SCE Courses for providing up-to-date technical knowledge
• SCE Support for your projects/technical books
• Complete Didactic Solutions from our partners
• SCE Contact Partner for individual support
 SCE Internet
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 2
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SCE Trainer Packages for Educators
SCE Trainer Packages are specially compiled hardware and software packages at special prices for up-to-date
educational content in automation and drive technology.
> 80 Trainer Packages for practice-oriented education
• Innovative hardware/software components incl. complete accessories
• Completely and functionally coordinated with one another in terms of content
• Low-cost original industrial components for classes
• Perfectly coordinated with SCE teaching material and aligned with
teaching curriculums/content
• Innovative trends taken into account
 Curriculums
 Trainer Packages
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 3
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Why do we provide SCE Trainer Packages?
Assembling individual products requires a lot of know-how and is time-consuming. We therefore mapped the relevant
configurations from practical educational use in SCE packages for you.
Who are these Trainer Packages for?
• For research, development and educational institutes
• For partners such as didactic OEM companies which integrate these
SCE Trainer Packages into a didactic solution.
• For industrial and corporate initial training – with the exception
of three STEP 7 Trainer Packages, see page 139.
What should be considered when using Trainer Packages?
The products listed may be subject to European/German and/or
US export regulations.
The notes on the Trainer Packages must also be observed.
!!! Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 4
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Overview Trainer Packages
SIMATIC Engineering Software
Operator Control & Monitoring
SIMATIC Controller
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Overview structure STEP 7 and HMI
Single-user license V13
12er Classroom license V13
12er Upgrade license V13
Software for students V13
Control with SIMATIC standard
Control with SIMATIC modular
CFC 12er Classroom license
CFC Student license
IE Softnet 12x Classroom license
*
*
*
*
Overview structure STEP 7 and HMI
WinCC Advanced V13 / WinCC flexible 2008
Software for students
SIMATIC HMI TP700 /TP1500 COMFORT PANEL
WinCC V13 Professional
WinCC V7 6er license
WinCC/Web Navigator V7 6er license
WinCC/Web Navigator V7 6er license (ASIA)
Upgrade WinCC V7/Web Navigator V7 6er license
*
*
*
*
*
*
*
*
SIMIT Simulation
•
•
SIMIT V8.1 Simulation framework
SIMIT V8.1 Demo version
Basic Automation
•
•
•
•
•
•
LOGO! 12/24V / LOGO! 230V / USB cable
LOGO! 12/24V / LOGO! 230V (ETHERNET)
Basic Panels KTP400 for LOGO!
S7-1200 SPS
Basic Panels KTP700 for S7-1200
Upgrade STEP 7 V13 Basic for S7-1200 Package
SIRIUS Industrial Controls
CNC-Software SinuTrain
PLM Software
*
*
*
*
*
*
*
*
*
Process Automation
•
•
•
Process control system PCS 7 3er license/upgrade
Process control system PCS 7 6er license
Process control system PCS 7 AS RTX Box
Drive Technology
•
•
•
SINAMICS G120 Standard drive
SINAMICS S120 Servo drive
SIMOTION D410 add-on for S120
Sensor Technology
•
•
•
MV440 Code Reader
SIMATIC RF200/RF300 RFID System
SIWAREX Weighing systems
Unrestricted / © Siemens AG 2015. All Rights Reserved.
*
Page 5
Overview I List I Graphic I Cabinet
Version 02/2015
**
*
**
*
ET 200SP Open Controller
ET 200SP 1512SP F-1 PN
S7-1513 PN / S7-1516 PN/DP
S7-1516F PN/DP
S7-314C-2PN/DP / S7-314C-2PN/DP (Upgrade)
S7-315F-2PN/DP
S7-300 Safety IOs
S7-315T Technology
*
**
Distributed IOs
•
•
•
•
•
ET 200SP
ET 200SP with communication module AS-i Master
ET 200SP with input module
Energy Meter
ET 200SP with communication module IO-Link
ET 200SP Expansion
Analog Safety
Industrial Communication
•
•
•
•
•
•
•
SINEMA - Network Monitoring Software
CP343-1 Advanced
Switch X208
Security Switch
IWLAN
FASTCONNECT Connection Kit
Development Kit
*
*
*
*
*
*
Important Notes
•
•
WorldSkills
Purchasing Remarks
* New / updated package
 TIA Portal
* Package in preparation
Digital Factory
SCE List Trainer Packages
 Trainer Packages
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 6
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
System architecture of the Trainer Packages
SIMATIC Software (STEP 7)
*
700
* * TP
TP1500 *
*
SIMATIC PCS 7
**
Distributed IOs
• SIMIT V8.1 Simulation
Framework
Basic Automation
• LOGO!
• S7-1200 PLC
• Panels KTP400/700
ET 200SP
SIMATIC NET
*
*
*
*
*
*
*
**
*
ET 200SP
ET 200SP with communication module AS-i Master
ET 200SP with input module
Energy Meter
ET 200SP with communication module
IO-Link
ET 200SP Expansion
Analog Safety
PROFINET
•
•
•
•
•
•
•
SIMIT Simulation
Drive Technology
SINAMICS G120
SINAMICS S120
*
*
CNC Software SinuTrain
SIRIUS Industrial Controls
SINEMA
CP343-1 Advanced
Switch X208
Security Switch
IWLAN
Accessories Kit
Development Kit
*
Version 02/2015
•
SIMATIC RF200/RF 300
MV440 HR Code reader
*
Weighing systems SIWAREX
Sensor Technology
Important Notes
*
• WorldSkills
• Order note
*
* New / updated package
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 7
•
•
•
•
•
*
PROFIBUS
PLM Software
SIMATIC Controller
S7-1513 PN
S7-1516 PN/DP
S7-1516F PN/DP
ET 200SP
S7-314C-2PN/DP
WinAC
S7-315F PN/DP S7-314C 1512SP F-1 PN
S7-300T Open Controller
Controller
Controller
PROFINET
*
WinCC prof.
WinCC advanced
Process
automation
•
Operator control &
monitoring (HMI)
Overview I List I Graphic I Cabinet
 TIA Portal
* Package in preparation
Digital Factory
Solution Partner demo case with SCE Trainer Packages
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 8
Version 02/2015
Digital Factory
SIRIUS Industrial Controls
• Overview
• IO-Link Trainer Package busbar with Infeed system – IO-Link
 Curriculums
 Learning Systems
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 9
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Infeed system with IO-Link (1/2)
1
1
5
2
2
2
2
3
3-PHASE BUSBAR WITH INFEED LEFT, FOR 2 CIRCUIT BREAKERS,
SIZE S00 AND S0
3-PHASE BUSBAR INCLUDING EXTENSION CONNECTOR, FOR 3 CIRCUIT BREAKERS,
SIZE S00 UND S0
CONTACTOR BASE, FOR CONTACTOR SIZE S00 WITH SCREW/SPRING-LOADED TERMINAL
(SINGLE-UNIT PACKING)
3RV2917-1A
CABLE CONNECTOR SIZE S00 SPRING-LOADED TERMINAL
CIRCUIT BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 1.4..2A, N-RELEASE
26A, SPRING-LOADED TERMINAL, STANDARD SWITCHING CAPACITY
LINK MODULE, ELECTRICAL AND MECHANICAL, FOR 3RV2011 AND 3RT201., SPRING-LOADED
TERMINAL
CONTACTOR, AC-3, 3KW/400V, 1NC, DC 24V, COM. CAPABILITY 3-POLE, SZ S00 SPRING-LOADED
TERMINAL
CONTACTOR, AC-3, 3KW/400V, 1NC, DC 24V, 3-POLE, SZ S00 SPRING-LOADED TERMINAL
3RV2917-5AA00
3RV2011-1BA20
Technical note:
See slides below
1 Order
x WIRING
KIT
number:
3RA2913-2AA2
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
3RV2917-7AA00
3RA2911-2AA00
3RT2015-2BB42-0CC0
3RT2015-2BB42
System requirements:
Schools, colleges and universities, for in-house vocational training departments
Industrial Controls
3RV2917-4B
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2
Sales note:
►
1 x WIRING KIT
3TK3388-0TP00
3RA2913-2BB2
 Project manual
 SIRIUS
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 10
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Infeed system with IO-Link (2/2)
1
1
1
1
1
1
1
WIRING KIT, SPRING-LOADED ELECTRICAL AND MECHANICAL,
INCL. MECH. INTERLOCK, FOR REVERSING STARTERS, SIZE S00
FUNCTION MODULE FOR IO-LINK, REVERSING START, SPRING-LOADED TERMINAL,
MOUNTED ON CONTACTORS 3RT2S0 COMM. CAPABLE CONTACTOR REQUIRED
WIRING KIT, SPRING-LOADED ELECTRICAL AND MECHANICAL, INCL. MECH. INTERLOCK,
FOR STAR-DELTA STARTER, SIZE S00
3RA2913-2AA2
FUNCTION MODULE STAR-DELTA COMPRISING A BASIC MODULE AND 2 COUPLING MODULES WITH
INTEGRATED CONNECTING CABLE; TIME RANGE 0.5...60S 24...240V AC/DC FOR 3RT2 CONTACTORS
3RA2816-0EW20
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
3RA2711-2BA00
3RA2913-2BB2
DIGITAL MONITORING RELAY COS-PHI AND CURRENT MONITORING FOR IO-LINK 90 TO 690V AC, 0.2 3UG4841-2CA40
TO 10A OVERSHOOT AND UNDERSHOOT ON DELAY TIME TRIPPING DELAY TIME HYSTERESIS 0.1 TO
3.0A 2 CHANGE-OVER CONTACTS, SPRING-LOADED TERMINAL
OVERLOAD RELAY 1...4 A FOR MOTOR PROTECTION SIZE S00, CLASS 5...30
3RB3113-4PE0
CONTACTOR ASS. MAIN CIRCUIT: SPR.-LOAD.TERM. AUX.CIRCUIT: SPR.-LOAD.TERM.
MANUAL-AUTOM. RESET INT. GROUND FAULT DETECTION
OPERATOR PANEL FOR DEVICES WITH IO-LINK OPERATOR PANEL FOR SIRIUS
3RA6935-0A
SWITCHING DEVICES WITH IO-LINK
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2
 Project manual
 SIRIUS
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 11
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Infeed system with IO-Link
2 x CIRCUIT
BREAKER
3RV2011-1BA20
3 x CONTACTOR
2 x CONTACTOR
3RT2015-2BB42-0CC0 3RT2015-2BB42
1 x OPERATOR PANEL FOR 1 x 3-PHASE
BUSBAR
DEVICES WITH IO-LINK
3RV2917-1A
3RA6935-0A
1 x 3-PHASE
BUSBAR
3RV2917-4B
1 x FM IO-LINK
3RA2711-2BA002
1 x FM STAR-DELTA
3RA2816-0EW20
5 x CONTACTOR
BASE
3RV2917-7AA00
1 x DIGITAL MONITORING
RELAY
3UG4841-2CA40
2 x CABLE CONNECTOR
3RV2917-5AA00
1 x OVERLOAD
RELAY
3RB3113-4PE0
2 x LINK MODULE
3RA2911-2AA00
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 x WIRING KIT
3RA2913-2BB2
1 x WIRING KIT
3RA2913-2AA2
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2
 Project manual
 SIRIUS
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 12
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Industrial Controls SIRIUS Modular System
SIRIUS Industrial Controls 
SIRIUS Commanding and Signaling Devices 
Safety Integrated 
Safety Relays 3SK1
[email protected] 
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
[email protected] 
 Project manual
 SIRIUS
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 13
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Engineering Software
• Overview
• Overview STEP 7 and SIMATIC HMI
• Single-user license
• 12er license and upgrade
• 12er Upgrade license for in-house vocational training
• Student license
• Control with SIMATIC standard
• Control with SIMATIC modular
• CFC 12er License
• CFC Student license
• IE Softnet 12er license
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 14
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
System structure for Trainer Packages STEP 7 and SIMATIC HMI
Touch Panel
SIMATIC Software
TP700 / TP1500
PROFIBUS and PROFINET connection
- STEP 7 as basis
Engineering tools for STEP 7
- S7-PLCSIM Simulation of S7 hardware
- S7-SCL High language similar to Pascal
- S7-GRAPH for sequencers to DIN 1131-3
SIMATIC HMI software Human Machine Interface
ETHERNET connection for engineering
PROFINET
WinCC with
- Advanced level
- Smart Option for Panel / PC
- Smart Access
- OPC Interface
USB
Adapter
PROFIBUS
ETHERNET connection for engineering
Software Engineering Tool for STEP 7
USB Adapter
S7 Controller
- SIMATIC CFC
- Control with SIMATIC
- SIMATIC NET SOFTWARE
6GK1571-0BA00-0AA0
S7 RS485, PC USB
including 5 m cable
School package with
PROFINET and PROFIBUS
ET 200SP Open Controller
ET 200SP …
School package with PROFINET
For PROFIBUS only interface
has to be ordered separately.
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 15
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC STEP 7 Professional – Software for Training
1er License
1 x Combo license for interchangeable usage
of: SIMATIC STEP 7 Professional V13 SP1*
STEP 7 Professional V13 SP1 * (LAD, FBD, STL), S7-GRAPH, S7-SCL, S7-PLCSIM
or: SIMATIC STEP 7 Professional 2010 SR4
STEP 7 V5.5 SP4 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
1 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Safety Advanced V13 SP1*
or: SIMATIC S7 Distributed Safety 5.4 SP5 Update 1
Totally
Integrated
Automation
PORTAL
Check HW compatibility
for TIA Portal 
SW functionally identical
to the industrial version
1 x SINAMICS Startdrive V13 SP1 * for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2, as of Firmware V4.6
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 27
Licenses only for STEP 7 Professional 2010 SR4
1 x SIMATIC S7-IMAP V3.0 SP3
1 x SIMATIC S7-Technology V4.2 SP4
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6ES7822-1AA03-4YA5
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Core product
for vocational
World Cup
Industrial
Control 
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 16
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC STEP 7 Professional – Software for Training
12er Classroom License
12 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Professional V13 SP1 *
STEP 7 Professional V13 SP1 * (LAD, FBD, STL), S7-GRAPH, S7-SCL, S7-PLCSIM
or:
SIMATIC STEP 7 Professional 2010 SR4
STEP 7 V5.5 SP4 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
12 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Safety Advanced V13 SP1 *
or: SIMATIC S7 Distributed Safety 5.4 SP5 Update 1
Totally
Integrated
Automation
PORTAL
Check HW compatibility
for TIA Portal 
SW functionally identical
to the industrial version
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
12 x SINAMICS Startdrive V13 SP1* for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2, as of Firmware V4.6
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 27
Licenses only for STEP 7 Professional 2010 SR4
12 x SIMATIC S7-IMAP V3.0 SP3
12 x SIMATIC S7-Technology V4.2 SP4
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, see slide 19
Students
* V13: also 64 BIT Windows 8.1
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
System requirements:
Professional, Enterprise
32
BIT:
Windows
7
Professional,
Enterprise,
Ultimate
SP1
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16)
Sales note:
Schools, colleges and universities, NOT for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick + 3 sticks with 20 software for students each)
Order number:
6ES7822-1BA03-4YA5
Upgrade of STEP 7 Prof. < 2010 et . <V12: 6ES7822-1AA03-4YE5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 17
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC STEP 7 Professional – Software for Training
12x Upgrade for in-house vocational training
12 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Professional V13 SP1 *
STEP 7 Professional V13 SP1 * (LAD, FBD, STL), S7-GRAPH, S7-SCL, S7-PLCSIM
or:
SIMATIC STEP 7 Professional 2010 SR4
STEP 7 V5.5 SP4 (LAD, FBD, STL) S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6,
S7-PLCSIM V5.4 SP5
12 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Safety Advanced V13 SP1 *
or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1
Totally
Integrated
Automation
PORTAL
Check HW compatibility
for TIA Portal 
SW functionally identical
to the industrial version
12 x SINAMICS Startdrive V13 SP1 * for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2, as of Firmware V4.6
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 28
Licenses only for STEP 7 Professional 2010 SR4
12 x SIMATIC S7-IMAP V3.0 SP3
12 x SIMATIC S7-Technology V4.2 SP4
* V13: also 64 BIT Windows 8.1
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
System requirements:
Professional, Enterprise
32
BIT:
Windows
7
Professional,
Enterprise,
Ultimate
SP1
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6ES7822-1BA03-4YE Upgrade of STEP 7 Prof. 2006, 2010 and < V12
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 18
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC STEP 7 Professional Software for students
Single-user license – limited to 365 days
20 x Combo license for interchangeable usage
of:
SIMATIC STEP 7 Professional V13 SP1 *
STEP 7 Professional V13 SP1 * (LAD, FBD, STL), S7-GRAPH, S7-SCL, S7-PLCSIM
or:
SIMATIC STEP 7 Professional 2010 SR4
STEP 7 V5. 5SP3 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6,
S7-PLCSIM V5.4 SP5
NEU
Students
Totally
Integrated
Automation
PORTAL
Check HW compatibility
for TIA Portal 
20 x SINAMICS Startdrive V13 SP1 *
for SINAMICS G120 CONTROL UNIT CU240E-2; CU250S-2, as of Firmware V4.6
SW functionally identical
to the industrial version
Software limited to 365 days through authorization
Package with:
5 * DVDs SIMATIC STEP 7 Professional 2010 SR4 , 5 * DVDs SIMATIC STEP 7 Professional V13 SP1 *
5 * DVDs SIMATIC STEP 7 Professional V13 SP1 * , 5* PLCSIM V 13 SP1 *
5 * DVDs SIMATIC STEP 7 Basic V13 SP1 *, 5 * DVDs SINAMICS Startdrive V13 SP1 *
System requirements:
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Use only for students for self-study at home.
Schools, colleges and universities, NOT for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6ES7822-1AC03-4YA5
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 19
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7 PID Control with SIMATIC
Standard and Modular
Standard control 6ES7860-2AA00-4YX0
6 x SIMATIC S7, STANDARD PID CONTROL V5.2 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION, E-SW,
SW AND DOCU ON CD, LICENSE KEY ON USB-STICK
6ES7830-2AA22-0YX0
1 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD
6ES7860-2AA21-0YX0
6ES7860-2AA21-0YX1
6ES7860-4AA01-0YX0
6ES7860-4AA01-0YX1
5 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW+DOCU
Modular control 6ES7860-1AA00-4YX0
6 x MODULAR PID CONTROL V5.1 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION E-SW,
SW AND DOCU ON CD
1 x MODULAR PID CONTROL, V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD
5 x MOD.PID CTRL, FB V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU. ON CD
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6ES7860-2AA00-4YX0 Standard
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6ES7830-1AA11-0YX0
6ES7860-1AA10-0YX0
6ES7860-1AA10-0YX1
6ES7860-4AA01-0YX0
6ES7860-4AA01-0YX1
6ES7860-1AA00-4YX0 Modular
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 20
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC S7 PID Control with SIMATIC
Standard and Modular
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
6 x Commissioning tool version 5.1
►
Process Automation
6 x Function block version 5.1
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
SIMATIC S7 PID controller for 6 licenses
Standard control consisting of:
6 x Parameterization software version 5.2
6 x Function block version 5.2
Integration continuous PID controller, impulse controller,
step controller into the user program starting from SIMATIC S7-313 CPU.
Modular control consisting of:
Extended features when used with the Standard module starting from SIMATIC S7-313 CPU.
Each package contains additionally
6 x PID Self-Tuner V5.1 for online initial parameterization and online adaptation
while the application is running.
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 21
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC CFC
12er Classroom License
Students
12 x
SIMATIC CFC V8.0
3 x 20
Software for Students SIMATIC CFC V8.0
SW limited to 365 days through authorization
20 licenses per USB stick.
SW functional identical to
the industrial version
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6ES7658-1EX08-0YS5
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 22
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC CFC software for students
Single-user license – limited to 365 days
20 x
SIMATIC CFC V8.0
SW limited to 365 days through authorization
20 licenses per USB stick
Students
SW functional identical to
the industrial version
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6ES7658-1EX08-0YS6
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 23
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC NET Software IE Softnet
12er Classroom License
12 X
6GK1704-1CW12-0AA0 SIMATIC NET IE SOFTNET-S7 V12
SIMATIC NET SOFTNET-IE S7 V12 SW F. S7-,S5-COMP.-COMM.,OPC;
PG/OP-COMM., CONF. SW, MAX 64 CONN; SINGLE LIC. F.1 INSTALLATION;
R-SW, SW + ELECTR. MAN ON DVD; LICENSE KEY ON USB-STICK; CLASS A;
2-LANGUAGES (G,E);
FOR 32/64BIT: WIN 7 PROF/ULT,
WINDOWS SERVER 2008 R2, SERVER 2012 FOR CP1612
Totally
Integrated
Automation
PORTAL
Check HW Compatibility
for TIA Portal 
SW functional identical to
the industrial version
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0BB01
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 24
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Virtual commissioning with SIMIT Simulation Framework
• Overview
• SIMIT V8.1 Simulation Framework and Upgrade
• SIMIT V8.1 Demo Version
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 25
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMIT Simulation Framework V8.1
Full version with one dongle
►
Industrial Controls
1. Creation/modification/testing (dongle owner/single-user license) of virtual plants with SIMIT
complete functionalities of SIMIT ULTIMATE version and FLOWNET, CONTEC liabary
►
Engineering
Software
2. Saving of SIMIT models, with demo version (without dongle) observe restrictions
►
SIMIT Simulation
3. Models can be used in demo version by unlimited number of users
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Restrictions of demo version have to be observed, see slides 27 and 28
IO limitations when using the demo version
64
64
11
8
400
binary inputs
binary outputs
analog inputs
analog outputs
components and
I 0.0-E 7.7
O 0.0-A 7.7
IW 64-IW 85
OW 64-OW 79
IO elements
Currently not compatible with
S7-1200/1500
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Hardware USB dongle
Order number:
6DL5260-0XX18-0YS5
Upgrade from 8.0 to 8.1: 6DL5260-0XX18-0YS6
 SIMIT demo version
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 26
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
 SIMIT Simulation Framework
Digital Factory
SIMIT Simulation Framework V8.1 Demo Version
SIMIT 8.1 Demo Version (without dongle)
►
Industrial Controls
The following limitation are in effect for the demo version:
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
• Simulation is limited to 45 minutes
• Only one coupling to PLCSIM or PRODAVE can be added to the project
• The address space is limited to IB0-IB7, IB64-IB85 for inputs and OB0-OB7, OB64-OB79 for outputs
• The FLOWNET and CONTEC libraries are not supported
• The editor for dynamic graphics, the trend and message function, the macro component editor, the SMD Typical import and the interface
for automatic control are available for test purposes in demo mode
• Projects created in demo mode cannot be executed in regular mode and are limited to the SIMIT installation
Currently not compatible with
S7-1200/1500
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6DL5260-0AX18-0YT8 (demo version)
 SIMIT demo version
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 27
Version 02/2015
Overview I List I Graphic I Cabinet
 SIMIT Simulation Framework
Digital Factory
SIMIT Simulation Framework V8.1, Demo Version
Application versions
SIMIT models
Test of PLC user program
Test of PLC user program
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
Educator (dongle owner):
Students (demo version without dongle):
►
Process Automation
• Creation, adaptation and transfer of models
without IO limits
• Use of the models within the restrictions of the demo version
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
• Creation, adaptation and transfer of models
for demo version within restrictions of demo version
• Create own models with IO limits
• Projects created in the demo version are restricted to the SIMIT
installation, in which they have been created
 SIMIT demo version
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 28
Version 02/2015
Overview I List I Graphic I Cabinet
 SIMIT Simulation Framework
Digital Factory
SIMIT Simulation Framework V8.1, Demo Version
Application versions
NEU
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
Students (demo version without dongle):
►
Distributed IOs
• Use the models of any dongle owner while observing
the IO limits
►
Operator control &
monitoring
• Simulation limited to 45 minutes
►
Process Automation
• Creation of own models with IO limits
►
• Projects created in demo mode are restricted to the
SIMIT installation, in which they have been created
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
SIMIT dongle A with SIMIT V8.1
Educators/
Students:
Creation and exchange of
SIMIT models
SIMIT demo version
Creation and exchange
of SIMIT models
with IO limits
Educators/
Students:
Created
SIMIT models
SIMIT dongle B with SCE V8.1
 SIMIT demo version
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 29
Version 02/2015
Overview I List I Graphic I Cabinet
 SIMIT Simulation Framework
Digital Factory
Basic Automation
• Overview
• LOGO! 12/24V and 230V/ETHERNET interface
• LOGO! 12/24V and 230V/USB cable
• Basic Panel KTP400 for LOGO! 1er
• Basic Panel KTP400 for LOGO! 6er
• S7-1200
• Basic Panel KTP700 for S7-1200 1er
• Basic Panel KTP700 for S7-1200 6er
• Upgrade STEP 7 V13 Basic for S7-1200 Packages
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 30
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
LOGO! 12/24V or 230V with ETHERNET interface
LOGO! 12/24V
6x LOGO! 12/24 RCE
6ED1052-1MD00-0BA8
6x LOGO! DM8 12/24R Expansion module
6ED1055-1MB00-0BA2
6x LOGO! Soft Comfort V8
6ED1058-0BA08-0YA1
LOGO! 230V
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
6x LOGO! 230 RCE
6ED1052-1FB00-0BA8
►
Distributed IOs
6x LOGO! DM8 230R Expansion module
6ED1055-1FB00-0BA2
►
6x LOGO! Soft Comfort V8
6ED1058-0BA08-0YA1
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessories:
6AV2132-0AF00-0AA0
Trainer Package: SIMATIC Basic Panel KTP400
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
System requirements:
WINXP, WIN7, WIN8 ALL VERSIONS, 32/64 BIT MAC OSX 10.6 TO 10.9 LINUX SUSE 11.3, SP3, K 3.0.76
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
ETHERNET cable required
Order number:
12/24V : 6ED1057-3SA20-0YA1
230V: 6ED1057-3SA20-0YB1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 31
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
LOGO! 12/24V or 230V
Available until Dec. 31, 2015
LOGO! 12/24V
5x LOGO! 12/24 RC
5x LOGO! Soft Comfort V8
1x LOGO! PC-cable (USB)
6ED1052-1MD00-0BA6
6ED1058-0BA08-0YA1
6ED1057-1AA01-0BA0
LOGO! 230V
5x LOGO! 230 RC
5x LOGO! Soft Comfort V8
1x LOGO! PC-cable (USB)
6ED1052-1FB00-0BA6
6ED1058-0BA08-0YA1
6ED1057-1AA01-0BA0
LOGO! PC-cable
4x LOGO! PC-cable (USB)
6ED1057-1AA01-0BA0
System requirements:
WINXP, WIN7, WIN8 all versions, 32/64 BIT MAC OSX 10.6 TO 10.9 LINUX SUSE 11.3, SP3, K 3.0.76
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
12/24V : 6ED1057-3SA00-0YA1
230V : 6ED1057-3SA00-0YB1
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Cable set: 6ED1057-3SA00-0YC0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 32
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC Basic Panel KTP400 for LOGO! ETHERNET 1er
1 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,
4" TFT DISPLAY, 65536 COLORS, PROFINET INTERFACE
CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13
6AV2123-2DB03-0AX0
1 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL
STAR AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
1 X SIMATIC WINCC BASIC V13 SP1 ENGINEERING SW, FLOATING LICENSE SW
AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS
6GK5005-0BA00-1AB2
6XV1870-3RH60
6AV2100-0AA03-0AA5
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
System requirements:
WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
►
PLM Software
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Important Notes
Technical note:
Authorization for WINCC BASIC on USB stick
Totally
Integrated
Automation
Order number:
6AV2132-2DB03-0AA1
PORTAL
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 33
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC Basic Panel KTP400 for LOGO! ETHERNET 6er
6 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,
4" TFT DISPLAY, 65536 COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC
V13/STEP 7 BASIC V13.
6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL
STAR AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M
6 X SIMATIC WINCC BASIC V13 SP1 ENGINEERING SW, FLOATING LICENSE SW
AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS
6AV2123-2DB03-0AX0
6GK5005-0BA00-1AB2
6XV1870-3RH60
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
6AV2100-0AA03-0AA5
System requirements:
WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT)
►
PLM Software
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Important Notes
Technical note:
Authorization for WINCC BASIC on USB stick
Totally
Integrated
Automation
Order number:
6AV2132-2DB03-0AA0
PORTAL
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 34
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC Basic Panel KTP400 for LOGO! ETHERNET
SIMATIC KTP400
BASIC COLOR PN
6AV2123-2DB03-0AX0
SCALANCE
XB005
6GK5005-0BA00-1AB2
SIMATIC WINCC BASIC V13 SP1
ENGINEERING SW
6AV2100-0AA03-0AA5
ETHERNET cable
6XV1870-3RH60
Package 6AV2123-2DB03-0AA1
contains 1 x
Package 6AV2123-2DB03-0AA1
contains 2 x
Package 6AV2123-2DB03-0AA0
contains 6 x
Package 6AV2123-2DB03-0AA0
contains 12 x
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 35
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1200 AC/DC/RELAY or DC/DC/DC
6 X Alternative:
SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD IO: 14 DI 24V DC; 10 DO
RELAY 0.5A; 2 AI 0 - 10V DC, POWER SUPPLY: 85 - 264 V AC @ 47 - 63 HZ, MEMORY: 75 KB
6ES7214-1BG40-0XB0
AC Pack. 6ES7214-1BE30-4AB3
6 X Alternative:
6ES7214-1AG40-0XB0
SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD IO: 14 DI 24V DC; 10 DO 24 V DC -Pack: 6ES7214-1AE30-4AB3
DC; 2 AI 0 - 10V DC, POWER SUPPLY: 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
6 X SIMATIC S7, STEP 7 BASIC V13 SP1 SINGLE LICENSE, E-SW, SW AND DOCU. ON DVD, CLASS A,
LICENSE KEY ON USB STICK, 2 LANGUAGES (GE,EN), REFERENCE HW: S7-1200
6ES7822-0AA03-0YA5
►
Operator control &
monitoring
6 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
►
Process Automation
►
6 X SIMATIC S7-1200, SIMULATOR MODULE, 8 CHANNEL SIMULATOR DC INPUT SWITCHES
6ES7274-1XF30-0XA0
Industrial
Communication
6 X SIMATIC S7-1200, ANALOG OUTPUT SB 1232, 1 AO, +/- 10VDC OR 0 - 20 MA
6ES7232-4HA30-0XB0
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
System requirements:
WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization for STEP 7 BASIC on USB stick
Order number:
AC/DC/RLY
Totally
Integrated
Automation
DC/DC/DC
6ES7214-1BE30-4AB3
6ES7214-1AE30-4AB3
PORTAL
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 36
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
Packages contains 6 times
Compact CPU
6ES7214-1BG40-0XB0
alternatively:
6ES7214-1AG40-0XB0
STEP 7 BASIC V13 SP1
6ES7822-0AA03-0YA5
ANALOG OUTPUT, SB 1232, 1 AO, +/-10VDC
OR 0 - 20 MA (11 BIT RESOLUTION)
6ES7232-4HA30-0XB0
SIMULATOR MODULE,
8 INPUT SWITCHES,
DC INPUT
6ES7274-1XF30-0XA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
ETHERNET cable
6XV1870-3RH60
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 37
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC Basic Panel KTP700 for S7-1200 1er
1 X SIMATIC HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536
COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13
SIMATIC HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536
COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13
1 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL STAR
AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE
4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6AV2123-2GB03-0AX0
6GK5005-0BA00-1AB2
6XV1870-3RH60
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41.
System requirements:
WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note:
Technical note:
Schools, colleges and universities, for in-house vocational training departments
Engineering Software required
Totally
Integrated
Automation
Order number:
6AV2123-2GB03-0AA1
PORTAL
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 38
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC Basic Panel KTP700 for S7-1200 6er
6 X SIMATIC HMI, KTP700 BASIC,BASIC PANEL,KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536
COLORS,PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC SIMATIC
HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 COLORS,
PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13
6AV2123-2GB03-0AX0
6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH
5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STARAND LINE TOPOGRAPHIES;LED-DIAGNOSIS, IP20,24 V DC POWER SUPPLY,
INCL. MANUAL
6GK5005-0BA00-1AB2
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41.
System requirements:
WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note:
Technical note:
Schools, colleges and universities, for in-house vocational training departments
Engineering Software required
Totally
Integrated
Automation
Order number:
6AV2123-2GB03-0AA0
PORTAL
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 39
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC Basic Panel KTP700 for S7-1200
SIMATIC KTP700
BASIC COLOR PN
SCALANCE XB005
6GK5005-0BA00-1AB2
6AV2123-2GB03-0AX0
Package 6AV2123-2GB03-0AA1
contains 1 x
Package 6AV2123-2GB03-0AA0
contains 6 x
ETHERNET cable
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6XV1870-3RH60
Package 6AV2123-2GB03-0AA1
contains 2 x
Package 6AV2123-2GB03-0AA0
contains 12 x
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41.
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 40
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC STEP 7 Basic V13 – Software for Training
Upgrade
6 x STEP 7 Basic V13 SP1 Upgrade Version V10.5/ V11 /V12 to V13 SP1
►
Industrial Controls
SIMATIC STEP 7 BASIC V13 SP1 TRAINER PACKAGE UPGRADE V13 SP1
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
6 x SINAMICS Startdrive V13 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2 , CU250S-2, as of Firmware V4.6
►
Operator control &
monitoring
Package with:
2 * DVDs SIMATIC STEP 7 Basic V13 SP1, 2 * PLCSIM V13 SP1, 2 * DVDs SINAMICS Startdrive V13 SP1
►
Process Automation
►
Industrial
Communication
For Hardware Package S7-1200, see slide 36 and Basic Panel KTP400, see slide 33,34 and Basic Panel KTP700, see slide 38, 39
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
ENGINEERING SOFTWARE; UPGRADE FOR 6 V10.5/V11/V12
SINGLE FLOATING-> V13 SP1 FLOATING; SOFTWARE AND DOCU. ON DVD;
LICENSE KEYS ON USB; 6 LANGUAGES (GE, EN, IT, FR, ES, ZH)
FOR CONFIGURATION OF SIMATIC S7-1200, SIMATIC BASIC PANELS
System requirements:
WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick
Totally
Integrated
Automation
Order number:
6ES7822-0AA03-4YE5
PORTAL
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 41
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Controller
Distributed Controller
• S7-1515SP PC + HMI (ET 200SP Open Controller)
• S7-1512SP F-1 PN (ET 200SP Distributed Controller)
Advanced Controller
•
•
•
•
S7-1516F PN/DP
S7-1516 PN/DP
S7-1516 PN/DP
S7-1513 PN
In-house training
Public schools
•
•
•
•
•
S7-314C-2PN/DP
S7-314C-2PN/DP (Upgrade TIA Portal)
S7-315F-2PN/DP
S7-315T Technology
Soft-SPS WinAC F RTX 2010
S7-300
Safety
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 42
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
ET 200SP Open Controller
CPU 1515SP PC with S7-1500 SW controller + HMI 512PT WinCC Runtime Adv.
6ES5710-8MA11
1 X STANDARD MOUNTING RAIL, LENGTH: 483 mm, FOR 19” CABINETS
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
1 X SIMATIC ET 200SP OPEN CONTROLLER, CPU 1515SP PC + HMI 512PT, 4 GB RAM, 16 GB CFAST W.
WIND. EMBEDDED STANDARD 7 P 64BIT PREINSTALL., W. S7-1500 SW CONTROLLER CPU 1505S V1.0
PREINSTALLED, WITH WINCC RUNTIME ADVANCED V13 SP1 PREINSTALLED WITH 512 POWERTAGS
LICENSE, INTERFACES: 1X SLOT CFAST, 1X SLOT SD/MMC, 1X PLUG F. ET 200SP BUS- ADAPTOR
PROFINET, 1X 10/100/1000 MBIT/S ETHERNET, 3 X USB, 1 X DVI-I GRAPHIC INTERFACE, DOCU DVD
6ES7677-2AA41-0FL0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
6ES7954-8LF02-0AA0
►
Controller/PLC
2 X DI 8x24VDC/0,5A HF
6ES7131-6BF00-0CA0
►
Distributed IOs
2 X DQ 8x24VDC/0,5A HF
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
6XV1870-3RH60
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 X Bus adapter 2X RJ45
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
1X SIMATIC ODK 1500S V1 SINGLE LICENSE F. 1 INSTALL., E-SW, SW AND DOCU. ON DVD, CLASS A, 2
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows 8.1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional V13 SP1 required
Order number:
6ES7677-2AA41-4AB1
6ES7806-2CD00-0YA0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 43
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
ET 200SP Open Controller
CPU 1515SP PC with S7-1500 SW controller + HMI 512PT WinCC Runtime Adv.
1 x ET 200SP
Open Controller
Bus adapter
2 x DQ 8x24
VDC/
0,5A HF
2 x DI 8x24
VDC/
0,5A HF
4 x Base
Units
1 x ETHERNET
--cable
Color-coded labels 1x SIMATIC
ODK 1500S V1
Labeling strips
SINGLE
LICENSE
Recommended accessories:
6ES7134-6PA00-0BD0
ANALOG INPUT MODULE,
AI ENERGY METER
6ES7137-6BD00-0BA0
COMMIUNICATION MODULE
IO-LINK MASTER
6ES7193-6BP00-0BD0
BASEUNIT
6ES7193-6BP00-0DA0
BASEUNIT
6XV1870-3RH60
SIMATIC NET, IND. ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
6ES7193-6SC00-1AM0
5 SHIELDING TERMINALS
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Expansions: ET 200SP Analog modules: 6ES7155-6AU00-0AB6
NOTE: SIMATIC STEP 7 Professional ≥ V13 SP1 is absolutely necessary for configuration
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 44
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
ET 200SP Distributed Controller
CPU 1512SP F-1 PN
1 X STANDARD MOUNTING RAIL, LENGTH: 483 mm, FOR 19” CABINETS
6ES5710-8MA11
►
Industrial Controls
►
Engineering
Software
1 X SIMATIC DP, CPU 1512SP F-1 PN FOR ET 200SP, CENTRAL PROCESSING UNIT WITH WORKING
MEMORY 300 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 3 PORT
SWITCH, 48 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7512-1SK00-0AB0
►
SIMIT Simulation
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
6ES7954-8LF02-0AA0
►
Basic Automation
2 X DI 8x24VDC/0,5A HF
6ES7131-6BF00-0CA0
►
Controller/PLC
2 X DQ 8x24VDC/0,5A HF
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
6XV1870-3RH60
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 X Bus adapter 2X RJ45
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows 8.1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional and Safety Advanced V13 SP1 necessary
Order number:
6ES7512-1SK00-4AB1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 45
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
ET 200SP Distributed Controller
CPU 1512SP F-1 PN
1 x ET 200SP
Distributed Controller
Bus adapter
2 x DI 8x24
VDC/
0,5A HF
2 x DQ 8x24
VDC/
0,5A HF
4 x Base
Units
1 x ETHERNET
-cable
Color-coded labels
Labeling strips
1 x Memory
Card 24 MB
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessories:
6ES7134-6PA00-0BD0
ANALOG INPUT MODULE,
AI ENERGY METER
3RK7137-6SA00-0BC1
COMMIUNICATION MODULE
AS-I MASTER
6ES7137-6BD00-0BA0
COMMIUNICATION MODULE
IO-LINK MASTER
6ES7193-6BP00-0BD0
BASEUNIT
6ES7193-6BP20-0DC0
BASEUNIT
6ES7193-6BP00-0DA0
BASEUNIT
6XV1870-3RH60
SIMATIC NET, IND. ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
6ES7193-6SC00-1AM0
5 SHIELDING TERMINALS
NOTE: SIMATIC STEP 7 Professional and Safety Advanced ≥ V13 SP1 is absolutely necessary for configuration
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 46
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516F PN/DP
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC
1 X SIMATIC S7-1500F, CPU 1516F-3 PN/DP, WITH WORKING MEMORY 1,5 MB FOR PROGRAM,
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET,
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 8 CHANNELS
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
1 X SIMATIC S7-1500, PROFILSCHIENE 482 MM
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, Windows 8.1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional necessary
Order number:
6ES7516-3FN00-4AB1
6EP1333-4BA00
6ES7516-3FN00-0AB0
6ES7521-1BL00-0AB0
6ES7522-1BL00-0AB0
6ES7531-7KF00-0AB0
6ES7532-5HD00-0AB0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6ES7590-1AE80-0AA0
6ES7590-1AE80-0AA0
6ES7954-8LF01-0AA0
6ES7592-1AM00-0XB0
6XV1870-3RH60
Core product
for vocational
World Cup
Industrial
Control 
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 47
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516F PN/DP
1x DIGITAL
1x CPU
1516F PN/DP INPUT MODULE
DI 32 X DC24V
4x Front
Connector
40-Pole
1x Memory
Card 24 MB
1x DIGITAL
OUTPUT MODULE
DQ 32 X DC24V/0.5A
1x ETHERNET
Cable
1x Power Supply
1x ANALOG
1x ANALOG
INPUT MODULE OUTPUT MODULE Input AC: 120/230V;
Output DC: 24V, 8A
AI 8 X U/I/RTD/TC AQ 4 X U/I ST
1x SIMATIC
S7-1500, MOUNTING
RAIL 482 MM
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
NOTE: SIMATIC STEP 7 Professional and Safety Advanced ≥ V13 is absolutely necessary for configuration
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 48
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516 PN/DP
Available until Dec. 31, 2015
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC
1 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM ,
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET,
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 8 CHANNELS
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional V12 SP1 necessary
Order number:
6ES7516-3AN00-4AB3
6EP1333-4BA00
6ES7516-3AN00-0AB0
6ES7521-1BL00-0AB0
6ES7522-1BL00-0AB0
6ES7531-7KF00-0AB0
6ES7532-5HD00-0AB0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6ES7590-1AE80-0AA0
6ES7954-8LF01-0AA0
6ES7592-1AM00-0XB0
6XV1870-3RH60
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 49
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516 PN/DP
Available until Dec. 31, 2015
1x DIGITAL
1x CPU
1516 PN/DP INPUT MODULE
DI 32 X DC24V
4x Front
Connector
40-Pole
1x Memory
Card 24 MB
1x DIGITAL
OUTPUT MODULE
DQ 32 X DC24V/0.5A
1x Power Supply
1x ANALOG
1x ANALOG
INPUT MODULE OUTPUT MODULE Input AC: 120/230V;
Output DC: 24V, 8A
AI 8 X U/I/RTD/TC AQ 4 X U/I ST
1x ETHERNET 1x SIMATIC
S7-1500, MOUNTING
Cable
RAIL 482 MM
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
For engineering SIMATIC STEP 7 Professional ≥ V12 SP1 is absolutely necessary
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 50
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516 PN/DP
Available until Dec. 31, 2015
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC
1 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM ,
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET,
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 8 CHANNELS
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz, see slide 16
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, not for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional of as V12 SP1 necessary
Order number:
6ES7516-3AN00-4AB2
6EP1333-4BA00
6ES7516-3AN00-0AB0
6ES7521-1BL00-0AB0
6ES7522-1BL00-0AB0
6ES7531-7KF00-0AB0
6ES7532-5HD00-0AB0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6ES7590-1AE80-0AA0
6ES7954-8LF01-0AA0
6ES7592-1AM00-0XB0
6XV1870-3RH60
6ES7822-1AA03-4YA5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 51
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1516 PN/DP
Available until Dec. 31, 2015
1x DIGITAL1x CPU
1516 PN/DP INPUT MODULE
DI 32 X DC24V
4x Front
Connector
40-Pole
1x Memory
Card 24 MB
1x DIGITALOUTPUT MODULE
DQ 32 X DC24V/0,5A
1x ETHERNETCable
1x Power Supply
1x ANALOG1x ANALOGINPUT MODULE OUTPUT MODULE Input AC: 120/230V;
Output DC: 24V, 8A
AI 8 X U/I/RTD/TC AQ 4 X U/I ST
1x SIMATIC
S7-1500,
Rail 480 MM
STEP 7 Professional
SW for Training 1er License
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
For engineering SIMATIC STEP 7 Professional ≥ V12 SP1 is absolutely necessary
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 52
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1513 PN
Available until Dec. 31, 2015
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
6ES7590-1AE80-0AA0
►
Operator control &
monitoring
6ES7592-1AM00-0XB0
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC
OUTPUT: 24 V/8 A DC
1 X SIMATIC S7-1500, CPU 1513-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 300 KB FOR
PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 40 NS BITPERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6EP1333-4BA00
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
INPUT DELAY 0.05... 20MS; INPUT TYPE 3 (IEC 61131); DIAGNOSIS, PROCESSALARMS
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS IN GROUPS OF 8, 4 A
PER GROUP; DIAGNOSIS; SUBSTITUTE VALUE
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
2 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES, INCL. 4
JUMPERS, AND CABLE STRAP
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
6ES7521-1BL00-0AB0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
SIMATIC STEP 7 Professional V12 SP1 necessary
Order number:
6ES7513-1AL00-4AB0
6ES7513-1AL00-0AB0
6ES7522-1BL00-0AB0
6ES7954-8LF01-0AA0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 53
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-1513 PN
Available until Dec. 31, 2015
1x CPU 1513-1 PN
1x DIGITAL
INPUT MODULE
DI 32 X DC24V
1x SIMATIC S7-1500,
1x DIGITAL
MOUTING RAIL 482 MM
OUTPUT MODULE
DQ 32 X DC24V / 0.5A
1x ETHERNET cable
Recommended accessories:
1x Power Supply
Input AC 120/230V;
Output.: DC 24V, 8A
2x Front Connector
40-Polle
1x Memory Card
24 MB
If analog or PROFIBUS IO is required:
Package 6ES7516-3AN00-4ABx (SIMATIC S7-1516 PN/DP),
see slide 67, 69, 71, 73, 75 or 76..
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
For engineering SIMATIC STEP 7 Professional ≥ V12 SP1 is absolutely necessary
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 54
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-314C-2 PN/DP
Available until Dec. 31, 2015
1 X SIMATIC S7-300, CPU 314C-2 PN/DP COMP.CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST
COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 192 KBYTE
6ES7314-6EH04-0AB0
1 X SIMATIC S7-300 PS307 IN:120/230 V AC OUT: 24 V DC/5 A
6ES7307-1EA01-0AA0
2 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE
6ES7392-1AM00-0AA0
1 X SIMATIC S7-300, SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8
INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED
6ES7374-2XH01-0AA0
1 X SIMATIC S7-300, RAIL L=480MM
6ES7390-1AE80-0AA0
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 512 KBYTES
6ES7953-8LJ30-0AA0
1 X SIMATIC S7, PC ADAPTER USB A2 FOR CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M)
6GK1571-0BA00-0AA0
Recommended accessory:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5, V11, V12, V13 required
Order number:
6ES7314-6EH04-4AB3
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 55
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-314C-2 PN/DP
Available until Dec. 31, 2015
1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
1x CPU314C-2 PN/DP
with 192 KByte
memory
1x Micro Memory Card
512 KByte
SIMULATOR MODULE SM 374
1x Rail L=480mm
2x FRONT
CONNECTOR
for SM, 40-Pole
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
PC Adapter
USB
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 56
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-314C-2 PN/DP
Upgrade Package for TIA Portal
SIMATIC S7-300, CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY, 24 DI/16 DO, 6ES7314-6EH04-0AB0
4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE
ETHERNET PROFINET, WITH 2 PORT SWITCH, INTEGRATED 24V DC POWER SUPPLY, FRONT
CONNECTOR (2 X 40-POLE) AND MICRO MEMORY CARD REQUIRED
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
1X
SIMATIC S7, MICRO MEMORY CARD FOR S7-300, 3.3 V NFLASH, 512 KBYTES
6ES7953-8LJ30-0AA0
►
Basic Automation
1X
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A,
AGGREGATE CURRENT 4A, 1 X 40-POLE
6ES7323-1BL00-0AA0
►
Controller/PLC
►
Distributed IOs
3X
SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE
6ES7392-1AM00-0AA0
►
Operator control &
monitoring
1X
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1X
Recommended accessory:
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5, V11, V12, V13 required
Order number:
6ES7314-6EH04-4AB4
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 57
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-314C-2 PN/DP
Upgrade Package for TIA Portal
1x Digital Modul
1x CPU314C-2 PN/DP
with 192 KByte SM 323, 16 DI and 16 DO,
DC 24V, 0,5A, 40 POLE
memory
1x Micro Memory
Card 512 KByte
3x FRONT
CONNECTOR
for SM, 40-Pole
ETHERNET-cable
6XV1870-3RH60
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 58
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-315F-2 PN/DP – PROFINET
Available until Dec. 31, 2015
1 x Rail L=480mm
1 x Power Supply PS 307, AC 120/230V; DC 24V, 5A
1 x CPU315F-2 PN/DP with 512 KByte, Working Memory
1 x Micro Memory Card 512 KByte
1 x Digital Module SM 323, 16 DE and 16 DA, C 24V, 0,5A, 40 POLIG
1 x Front Connector for SM, 40-Pole
1 x Analog Module SM 334, 4 AE/2 AA, 20-Pole
1 x Front Connector for SM, 20-Pole
1 x Distributed Safety V5.4, Floating License
6ES7390-1AE80-0AA0
6ES7307-1EA01-0AA0
6ES7315-2FJ14-0AB0
6ES7953-8LJ30-0AA0
6ES7323-1BL00-0AA0
6ES7392-1AM00-0AA0
6ES7334-0CE01-0AA0
6ES7392-1AJ00-0AA0
6ES7833-1FC02-0YA5
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessory:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Complementary to: Trainer Package F-Technology S7-300 – PROFINET 6ES7326-2FS00-4AB1
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5, V11, V12, V13 required
Order number:
6ES7315-2FH14-4AB1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 59
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-315F-2 PN/DP – PROFINET
Available until Dec. 31, 2015
1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
1x Front Connector
for SM, 40-Pole
1x CPU315F-2 PN/DP
with 512 KByte Memory
1x Digital Module SM 323,
16 DI and 16 DO, DC 24V,
0,5A, 40-Pole
1x Micro Memory Card
512 KByte
1x Analog Module SM 334,
4 AE/2 AA, 20-Pole
1x Rail L = 480mm
1x Front Connector
for SM, 20-Pole
1x Distributed
Safety V5.4,
Floating License
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessory:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 60
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-300 F-Technology
Safety In-/Output Module
Available until Dec. 31, 2015
1 x F-Digital Input SM 326, 24 DE
6ES7326-1BK02-0AB0
►
Industrial Controls
1 x F-Digital Output SM 326, 8 DA; DC 24V, 2A
6ES7326-2BF41-0AB0
►
Engineering
Software
1 x Separator Module
6ES7195-7KF00-0XA0
►
SIMIT Simulation
2 x Front Connector for SM, 40-Pole
6ES7392-1AM00-0AA0
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Complementary to: Trainer PackageS7-mEC –modular Embedded: 6ES7677-1FD00-4AB1 / CPU315F-2 PN/DP: 6ES7315-2FH14-4AB1
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Safety-CPU required
Order number:
6ES7326-2FS00-4AB1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 61
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-300 F-Technology
Available until Dec. 31, 2015
1x F-Digital Input
SM 326,
24 DE
1x F-Digital Output
SM 326,
8 DA; DC 24V, 2A
2x Front Connector
for SM, 40-Pole
1x Separator Module
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 62
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-315T Technology-PLC
Motion Control
1 x Mounting rail L=480mm
1 x Power supply PS 307, AC 120/230V; DC 24V, 5A
1 x 315T-3 PN/DP with 384 KB working memory
2 x Front connector for CPU, 40-pole
1 x Micro Memory Card 8 MB
1 x Digital Module SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40-Pole
1 x SIMATIC S7-300, Interface Module IM174 for connection analog
drives and step drives via isochronous PROFIBUS
1 x Front Connector for IM, 40-Pole
1 x SIMATIC NET, connection cable 830-2 for PROFIBUS, preassembled
cable with two Sub-D connectors 9-pole, terminating resistors, 3m
6ES7390-1AE80-0AA0
6ES7307-1EA01-0AA0
6ES7315-7TJ10-0AB0
6ES7392-1AM00-0AA0
6ES7953-8LP31-0AA0
6ES7323-1BL00-0AA0
6ES7174-0AA10-0AA0
1 x INDUSTRIAL ETHERNET CORD RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
1 x SIMATIC S7, S7-Technology V4.2, SP4 Optional Package for STEP 7, Floating License
6XV1870-3RH60
6ES7392-1AM00-0AA0
6XV1830-2AH30
6ES7864-1CC42-0YA5
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5 required
Order number:
6ES7315-7TJ10-0AB1
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 63
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC S7-315T Technology-PLC
Motion Control
1x Rail
L=480mm
1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
3x Front Connector 1x ETHERNET
for SM, 40-Pole
Cable
1x 315T-3 PN/DP
with 384 KB
Working Memory
1x Micro Memory Card
8 MB
1x Digital Module SM 323, 1x SIMATIC S7-300,
16 DI and 16 DO, DC 24V, Interface Module IM174,
0.5A, 40-Pole
for connection of analog
drives and step drives
via isochronous PROFIBUS
1x SIMATIC S7,
S7-Technology V4.2 SP4
Options package for
STEP 7, Floating license
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 64
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC WinAC RTX F 2010 PC-based Control
Available until Dec. 31, 2015
1x WinAC Basis RTX F 2010 (6ES7671-1RC08-0YA0)
►
Industrial Controls
1x CP 5622 PCI EXPRESS X1-CARD FOR CONNECTING A PG OR PC
WITH PCI EXPRESS-BUS TO PROFIBUS OR MPI (6GK1562-2AA00)
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Single License for 1 Installation
Runtime-SW, SW and
Documentation on DVD
SW-Class A, 3-speaking (D,E,F)
Reference-Hardware: SIMATIC PC, SIMATIC S7-mEC
System requirements:
32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3, INTERVALZERO RTX
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5, V11, V12, V13 required
Order number:
6ES7671-1RC08-0YS0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 65
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Distributed IOs
• Overview
• Basic modules
• ET 200SP
• ET 200SP with communication module – AS-i Master
• ET 200SP with input module – Energy Meter
• ET 200SP with communication module – IO-Link
• Expansion modules
• ET 200SP expansion – Analog
• ET 200SP expansion – Safety
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 66
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200 SP
In Preparation
1 X Standard mounting rail, length: 483 mm, for 19” cabinets
6ES5710-8MA11
1 X IM155-6PN HF including server module
6ES7155-6AU00-0CN0
2 X DI 8X24VDC/0.5A HF
6ES7131-6BF00-0CA0
2 X DQ 8X24VDC/0.5A HF
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
1 X Bus adapter 2X RJ45
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V5.5 or V13 required
Order number:
6ES7155-6AU00-0AB0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 67
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200 SP
In Preparation
1x IM 155-6 PN HF
incl. server module
Bus adapter
2 X DI 8x24VDC/
0.5A HF
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
Recommended accessories:
►
Drive Technology
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6 M
►
CNC Software
►
PLM Software
►
Important Notes
2 X DQ 8x24VDC/
0.5A HF
4 X Base Units
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
Color-coded labels
Labeling strips
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 68
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC ET 200 SP with AS-i Master communication module
1 X Standard mounting rail. 35mm, length 483 mm, for 19“ cabinets
6ES5710-8MA11
1 X IM155-6PN HF including server module
6ES7155-6AU00-0CN0
2 X DI 8x24VDC/0.5A HF
6ES7131-6BF00-0CA0
2 X DQ 8x24VDC/0.5A HF
1 X Bus adapter 2xRJ45
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog max 24VDC/10A)
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 labeling strips, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels 16 process terminals, gray/blue, CC02, 10 units
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
1 X CM AS-i MASTER ST ET 200SP (AS-i V3.0)
1 X BU type C0, BU20-P6+A2+4D
3RK7137-6SA00-0BC1
6ES7193-6BP20-0DC0
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V13 required
Order number:
6ES7155-6AU00-0AB3
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 69
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200SP with AS-i Master communication module
1x IM 155-6 PN HF
incl. server module
1 X CM AS-i MASTER
Bus adapter
2 X DI 8x24VDC/
0.5A HF
2 X DQ 8x24VDC/
0.5A HF
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
Recommended accessories:
►
Drive Technology
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6 M
►
CNC Software
►
PLM Software
►
Important Notes
4 X Base Units
Color-coded labels
Labeling strips
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
1 X Base Units
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 70
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC ET 200SP with Energy Meter input module
1 X Standard mounting rail 35 mm, length: 483 mm, for 19” cabinets
6ES5710-8MA11
1 X IM155-6PN HF including server module
6ES7155-6AU00-0CN0
2 X DI 8x24VDC/0.5A HF
6ES7131-6BF00-0CA0
2 X DQ 8x24VDC/0.5HF
1 X Bus adapter 2xRJ45
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A)
1 X Color-coded lablels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 Labeling strips, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels 16 process terminals, gray/blue, CC02, 10 units
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
1 X AI Energy Meter ST
1 X BASEUNIT PUSH-IN TERMINALS, WITHOUT AUX TERMINALS, JUMPERED TO LEFT
1 X Shielding terminals, 5 units
6ES7134-6PA00-0BD0
6ES7193-6BP00-0BD0
6ES7193-6SC00-1AM0
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V13 required
Order number:
6ES7155-6AU00-0AB1
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 71
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200SP with Energy Meter input module
1x IM 155-6 PN HF
incl. server module
1 X Energy
Meter
Bus adapter
1 X Base Units
2 X DI 8x24VDC/
0.5A HF
2 X DQ 8x24VDC/
0.5A HF
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
Recommended accessories:
►
Drive Technology
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6 M
►
CNC Software
►
PLM Software
►
Important Notes
4 X Base Units
Color-coded labels
Labeling strips
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
1 X shielding
terminals
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 72
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC ET 200SP with IO-Link communication module
1 X Standard mounting rail 35 mm, length: 483 mm, for 19” cabinets
6ES5710-8MA11
1 X IM155-6PN HF including server module
6ES7155-6AU00-0CN0
2 X DI 8x24VDC/0.5A HF
6ES7131-6BF00-0CA0
2 X DQ 8x24VDC/0.5HF
6ES7132-6BF00-0CA0
6ES7193-6AR00-0AA0
6ES7193-6BP00-0DA0
6ES7193-6CP01-2MA0
6ES7193-6LA10-0AA0
6ES7193-6CP02-2MA0
6ES7193-6BP00-0DA0
6ES7137-6BD00-0BA0
6ES7 193-6CP04-2MA0
1 X Bus adapter 2xRJ45
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A)
1 X Color-coded lablels 16 process terminals, gray/red, CC01, 10 units
1 X 1000 Labeling strips, light gray, 10 sheets DIN A4, perforated, paper
1 X Color-coded labels 16 process terminals, gray/blue, CC02, 10 units
1 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max.24VDC/10A)
1 X CM 4xIO-Link ST
1 X Color-coded labels 16 process terminals, gray/blue, CC04, 10 units
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V13 required
Order number:
6ES7155-6AU00-0AB2
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 73
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200SP with IO-Link communication module
1x IM 155-6 PN HF
incl. server module
Bus adapter
2 X DI 8x24VDC/
0.5A HF
2 X DQ 8x24VDC/
0.5A HF
4 X Base Units
Color-coded labels
Labeling strips
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
1 X CM 4xIO-Link ST
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 X Base Units
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 74
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC ET 200SP – Analog modules expansion
SIMATIC ET 200SP Analog modules expansion consisting of:
2 X AI 2xU/I 2-/4-wire HS
1 X AQ 2xU/I HS
3 X BU type A0, 16 push-in, 2 infeed terminals (digital/analog, max. 24VDC/10A)
1 X Shielding terminals,5 units
1 X Color-coded labels 16 process terminals, gray/red/blue, CC03, 10 units
2 x AI 2xU/I
2-/4-wire HS
1 x AQ 2xU/I HS
5X Shielding terminals Color-coded labels
6ES7134-6HB00-0DA1
6ES7135-6HB00-0DA1
6ES7193-6BP00-0DA0
6ES7193-6SC00-1AM0
6ES7193-6CP03-2MA0
3 x Base
Units
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V13 required
Order number:
6ES7155-6AU00-0AB6
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 75
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC ET 200SP – Safety modules expansion
SIMATIC ET 200SP Safety modules expansion consisting of:
1 X ELECTRONIC MODULE F-DI 8x24VDC HF
1 X ELECTRONIC MODULe F-DQ 4x24VDC/2A PM HF
1 X ELECTRONIC MODULe F-RQ DC24V/AC24..230V/5A
2 X BASEUNIT BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A)
1 X BASEUNIT BU type F0
1 X SIMATIC ET 200SP, 1000 labeling strips, yellow
1 X Color-coded labels, 16 process terminals, gray/red, CC01, 10 units
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units
1x F-RQ
DC24V/AC24..230V/5A
1x F-DI
1x F-DQ
8x24VDC HF 4x24VDC/2A PM HF
Labeling
strips
3 x Base Units
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
STEP 7 V13 required
Order number:
6ES7136-6BA00-0AB1
6ES7136-6BA00-0CA0
6ES7136-6DB00-0CA0
6ES7136-6RA00-0BF0
6ES7193-6BP00-0DA0
6ES7193-6BP20-0BF0
6ES7193-6LA10-0AG0
6ES7193-6CP01-2MA0
6ES7193-6CP02-2MA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 76
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Operator control & monitoring
• Overview
• Overview STEP 7 and HMI
• WinCC Advanced V13/WinCC flexible 2008 SP3
• WinCC Advanced V13/WinCC flexible 2008 SP3
Software for students
• SIMATIC HMI TP700/TP1500 COMFORT PANEL
• WinCC/Web Navigator V13 Professional
• SIMATIC WinCC V7.3
• SIMATIC WinCC/Web Navigator V7.3 – Diagnostics
• SIMATIC WinCC/Web Navig. V7.3 – ASIA, Diagnostics
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 77
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Trainer Packages
Overview structure STEP 7 and SIMATIC HMI
Touch- or Operator-Panel
SIMATIC Software
TP700 / TP1500
PROFIBUS and PROFINET connection
- STEP 7 as the Basis
Engineering tools for STEP 7
- S7-PLCSIM Simulation of S7-Hardware
- S7-SCL similar to Pascal
- S7-GRAPH for sequence control with DIN1131-3
SIMATIC HMI software –
Human Machine Interface
ETHERNET connection for Engineering
PROFINET
WinCC with
- Advanced level
- Smart Option for Panel / PC
- Smart Access
- OPC-Interface
USBAdapter
PROFIBUS
ETHERNET connection for Engineering
Software Engineering Tool for STEP 7
- SIMATIC CFC
- PID Control with SIMATIC
- SIMATIC NET Software
USB-Adapter
S7- Controller
6GK1571-0BA00-0AA0
S7 RS485, PC USB
including 5 m cable
Packages with PROFINET
and PROFIBUS
ET 200SP Open Controller.
ET 200SP …
Packages with PROFINET
For PROFIBUS only interface
has to b ordered separately
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 78
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC WinCC Advanced V13 / WinCC flexible 2008 SP3
6er Classroom License
6 x Combo-license for freely interchangeable usage of Engineering SW
of:
SIMATIC WinCC Advanced V13 SP1 *
or:
SIMATIC WinCC flexible 2008 SP3
Totally
Integrated
Automation
PORTAL
6 x Option and Runtime software, see slide 80
Check HW Compatibility
for TIA Portal 
Additionally included in the package 6AV2102-0AA03-0AS5:
2 x 20 SIMATIC WinCC Advanced V13 SP1 * / WinCC flexible 2008 SP3 for Students, see slide 81
Software is limited to 365 days through authorization
Students
SW functional identical to
the industrial version
Core product
for vocational
World Cup
Industrial
Control 
System requirements:
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
64 BIT: Windows 7 Professional, Enterprise (not N), Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise (not N), Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6AV2102-0AA03-0AS5
Upgrade (to 2008 SP3)
6AV6613-1XA01-3CS0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
from 2008, V11, V12 to Advanced V13
6AV2102-4AA03-0AS5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 79
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC WinCC Advanced V13 SP1 / WinCC flexible 2008 SP3
Option and Runtime Software
WinCC Advanced V13 SP1
►
Industrial Controls
WinCC RT Advanced (128 Power Tags)
►
Engineering
Software
►
SIMIT Simulation
WinCC Logging for RT Advanced
►
Basic Automation
WinCC [email protected] for RT Advanced
►
Controller/PLC
WinCC [email protected] for SIMATIC Panel
►
Distributed IOs
►
Operator control &
monitoring
WinCC flexible 2008 SP3
►
Process Automation
WinCC flexible 2008 SP 3 Runtime (128 Power Tags)
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
WinCC flexible/[email protected] for Panels
►
CNC Software
WinCC flexible/[email protected] for PC
►
PLM Software
WinCC flexible/OPC-Server for PC
►
Important Notes
WinCC Recipes for RT Advanced
WinCC flexible/[email protected] for Panels
WinCC flexible/[email protected] for PC
WinCC flexible/Archives for PC
WinCC flexible/Recipes for PC
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 80
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC HMI WinCC Advanced V13/WinCC flexible 2008 SP3
Single License for Students – limited to 365 days
20 x Combo-license for interchangeable usage the Engineering SW
of :
SIMATIC WinCC Advanced V13 SP1*
or:
SIMATIC WinCC flexible 2008 SP3
Students
Totally
Integrated
Automation
PORTAL
Licences limited to 365 days through authorization
Runtime Licences:
20 x SIMATIC WinCC RT Advanced V13 SP1 * -128 PowerTags
20 x SIMATIC WinCC flexible 2008 Runtime SP3 - 128 PowerTags
Software is limited to 365 days through authorization
Check HW Compatibility
for TIA Portal 
Students
SW functional identical to
the industrial version
Package with:
10 * DVDs WinCC Advanced V13 SP1 and
10 * DVDs SIMATIC WinCC flexible 2008 SP3
System requirements:
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB-Stick
Order number:
6AV2102-0AA03-0AS7
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 81
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC HMI TP700 / TP1500 COMFORT, COMFORT PANEL
with PROFINET and MPI/PROFIBUS DP INTERFACE
alternative:
1 x 7” SIMATIC HMI TP700 COMFORT, Touch Panel with 6AV2124-0GC01-0AX0
PROFINET and MPI/PROFIBUS DP INTERFACE
(Panel with integrated switch for 2 x RJ 45 ports)
alternative:
1 x 15“ SIMATIC HMI TP1500 COMFORT, Touch Panel with 6AV2124-0QC02-0AX0
PROFINET and MPI/PROFIBUS DP INTERFACE
(Panel with integrated switch for 2 x RJ 45 ports)
Totally
Integrated
Automation
PORTAL
Check HW Compatibility
for TIA Portal 
SW functional identical to
the industrial version
Additionally the package contains
• 1 x Engineering, Option and Runtime software SW and license SIMATIC WinCC Advanced V13 SP1, see slide 79
1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, 6XV1870-3RH60
CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
Core product
TP 700 / 1500 can only be configured with WinCC Comfort, Advanced, Prof. V11 SP2 , V12, V13
for vocational
World Cup
Industrial
Control 
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1. Windows 8.1 Professional, Enterprise
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick (1 stick)
Order number:
6AV2133-4AF00-0AA0 (with TP700)
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6AV2133-4BF00-0AA0 (with TP1500)
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 82
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC WinCC/Web Navigator V13 SP1 Professional
Classroom License
WinCC/Web Navigator V13 SP1 Professional
6 x WinCC V13 SP1, version RC 4096 variables
6 x WinCC/Web Navigator Diagnostics Server V13 SP1
6 x WinCC/Web Navigator Diagnostics Client V13 SP1
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1. Windows 8.1 Professional, Enterprise
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick
Order number:
6AV2105-0HA03-0AS0
Totally
Integrated
Automation
PORTAL
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 83
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC WinCC V7.3 SE Update 1
Classroom License
WinCC Trainer Package V7.3 SE Update 1
►
Industrial Controls
6x
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
WinCC V7.3 SE Update 1 RC 2048 variables
Upgrade WinCC and WinCC/Web Navigator V7.0 SP3
6x
WinCC RC Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3, RC 2048 variables
6x
WinCC/WebNavigator Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3
Upgrade WinCC and WinCC/Web Navigator V7.3 SE Update 1
6x
WinCC RC Upgrade, V6.2  V7.3, V7.0  V7.3, RC 2048 variables
►
Process Automation
6x
WinCC/WebNavigator Upgrade, V6.2  V7.3, V7.0  V7.3
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
►
CNC Software
►
PLM Software
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Important Notes
Technical note:
Authorization on USB stick
Order number:
6AV6381-1BP07-3AX5
System requirements:
Upgrade: 6AV6381-1BP07-3AX3 from V6.2 /7.0 to V7.3
6AV6381-1BP07-0AX3 from V6.0/6.2 to V7.0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 84
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC WinCC/Web Navigator V7.3 SE Update 1 – Diagnostics
Classroom License
WinCC/Web Navigator V7.3 SE Update 1
►
Industrial Controls
6x
WinCC V7.3 SE Update 1 RC 2048 variables
►
6x
WinCC/Web Navigator Diagnostics Server V7.3 SE Update 1
Engineering
Software
6x
WinCC/Web Navigator Diagnostics Client V7.3 SE Update 1
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
Upgrade WinCC und WinCC/Web Navigator V7.0 SP3
6x
WinCC RC Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3, RC 2048 variables
►
Distributed IOs
6x
WinCC/WebNavigator Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
►
CNC Software
►
PLM Software
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Important Notes
Technical note:
Authorization on USB stick
Order number:
6AV6371-1DH07-3AX5
Upgrade WinCC und WinCC/Web Navigator V7.3 SE Update 1
6x
WinCC RC Upgrade, V6.2  V7.3, V7.0  V7.3, RC 2048 variables
6x
WinCC/WebNavigator Upgrade, V6.2  V7.3, V7.0  V7.3
System requirements:
Upgrade: 6AV6381-1BP07-3AX3 from V6.2/7.0 to V7.3
6AV6381-1BP07-0AX3 from V6.0/6.2 to V7.0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 85
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC WinCC/Web Navigator V7.3 SE Update 1 ASIA – Diagnostics
Classroom License
WinCC/Web Navigator V7.3 SE Update 1 – ASIA / Diagnostics
►
Industrial Controls
6x
WinCC V7.3 SE Update 1 RC 2048 variables
►
6x
WinCC/Web Navigator Diagnostics Server V7.3 SE Update 1
Engineering
Software
6x
WinCC/Web Navigator Diagnostics Client V7.3 SE Update 1
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick
Order number:
6AV6371-1DH07-3AV5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 86
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process Automation
• Overview
• Process control system SIMATIC PCS 7 – 3er SW License/Upgrade
• Process control system SIMATIC PCS 7 – 6er Software License
• Process control system SIMATIC PCS 7 AS RTX Box – Hardware
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 87
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process control system SIMATIC PCS 7
3er License/Upgrade
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
6ES7658-4XX18-0YT8
SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.1
DATA STORAGE MEDIUM WITHOUT LICENSE
►
Distributed IOs
►
Operator control &
monitoring
6ES7650-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.x
DATA STORAGE MEDIUM WITHOUT LICENSE
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1x
1x
1x
DVD:
Paper:
Stick:
PCS 7 Software V8.1
Certificate of License (A5E00276662)
License Key USB Stick with 3 * FLOATING LICENSES
Recommended accessories if only DVDs with version 8.1 available
System requirements:
Windows 7 SP1 Ultimate/Enterprise (32- or 64-bit) Windows Server 2008 R2 SP1 Standard Edition (64-bit)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick
Order number:
6ES7650-0XX08-0YS5
Upgrade: 6ES7650-0XX08-0YE5 from V7.1 to V8.0
6ES7650-0XX18-0YE5 from V8.0 to V8.1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 88
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process control system SIMATIC PCS 7
6er License
Equivalent to 2 x SIMATIC PCS 7 – 3er license, siehe Folie 88
Recommended accessories if only DVDs with version 8.1 available
6ES7658-4XX18-0YT8
SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.1
DATA STORAGE MEDIUM WITHOUT LICENSE
6ES7650-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.x
DATA STORAGE MEDIUM WITHOUT LICENSE
System requirements:
Windows 7 SP1 Ultimate/Enterprise (32- or 64-bit) Windows Server 2008 R2 SP1 Standard Edition (64-bit)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB stick
Order number:
6ES7650-0XX17-2YS5
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 89
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process control system SIMATIC PCS 7 AS RTX Box
Hardware
• 1 x SIMATIC PCS 7 AS RTX Box 427C
• 1 x ET 200M – Station with 7DE(144), 3DA(64), 1AE(8), 1AA(8) Assemblies
• 1 x SITOP power supply 20A with Front Connector and Communication Bus
Content: see slide 91, 92
Note:
• PCS 7 Licences additional required, see slide 88, 89
• Trainer Package adjusted on PCS 7 training curriculms
System requirements:
Windows 7 SP1 Ultimate/Enterprise (32 or 64 Bit) Windows Server 2008 R2 SP1 Standard Edition (64 Bit)
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6ES7654-0UE13-0XS0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 90
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process control system SIMATIC PCS 7 AS RTX Box
Hardware (1)
1x
SIMATIC PCS 7 AS RTX AUTOMATION SYSTEM BASED ON IPC427C, CORE2 DUO 1.2 GHZ, 800 MHZ
FSB, 3MB SLC, 2 GB DDR3 1066 SODIMM RAM, 4 GB COMPACT-FLASH CHANGEABLE, CP5611
ONBOARD, WINDOWS EMBEDDED STANDARD 2009, WINAC RTX 2010 SOFTWARE CONTROLLER,
RUNTIME LICENSE AS PO100 PREINSTALLED FOR PCS 7 OPERATING, APPLICABLE EX PCS 7 V7.1
SP2 OR HIGHER
6ES7654-0UE13-0XX0
1x
SIMATIC,STAND.SECTIONAL RAIL WIDTH 35MM, LENGTH 483MM FOR 19 IN.CABINETS
6ES5710-8MA11
1x
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
1x
SIMATIC NET, CONN. CABLE 830-2 F. PROFIBUS, PREASSEMBLED CABLE WITH 2 SUB-DCONNECTORS
9-POLE, SWITCHABLE TERMINATING RESISTORS, 5 M
6XV1830-2AH50
1x
SITOP PSU100M 20A STABILIZED POWER SUPPLY INPUT: 120-230 V AC 110-220 V DC
OUTPUT: 24 V/20 A DC
6EP1336-3BA10
2x
SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN
6ES7321-1BL00-0AA0
1x
SIMATIC S7/PCS7, SM 321 DIGITAL INPUT MODULE, 16 DI, 24V DC, 1 X 40 PIN, CAPABLE OF
6ES7321-7TH00-0AB0
DIAGNOSTICS, FOR CONTACTS (CONNECTED/ UNCONNECTED), NAMUR SENSOR, 3/4-WIRE-BERO,
WITH FLUTTER MONITORING, PULSE LENGTHENING, WIRE BREAK DETECTION, IM153-2 INTERFACE
MOD. REQUIRED
4x
SIMATIC S7-300, DIGITAL INPUT SM 321, GALVANICALLY ISOLATED, 16 DI, DC 24V, 1 X 20 PIN,
PROCESS INTERRUPT, DIAGNOSTICS, FIT FOR ISOCHRONE MODE
6ES7321-7BH01-0AB0
1x
SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN,
SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)
6ES7322-1BL00-0AA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 91
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Process control system SIMATIC PCS 7 AS RTX Box
Hardware (2)
2x
SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF
DIAGNOSTICS, WIRE BREAK DETECTION TO 0 AND 1 SIGNAL, 1 X 40-PIN, INTERFACE MODULE IM
153-X HF NECESSARY
6ES7322-8BH10-0AB0
SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL,
CURRENT, VOLTAGE, INTERRUPTS, DIAGNOSTICS,1 X 20 PIN, FIT FOR ISOCHRONE MODE
IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE
6ES7331-7HF01-0AB0
SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS;
RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
6ES7332-5HF00-0AB0
5x
SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN
6ES7392-1AJ00-0AA0
7x
SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN
6ES7392-1AM00-0AA0
1x
SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE IO SUBMODULES FOR
INSERT/REMOVE
6ES7153-2BA02-0XB0
1x
SIMATIC DP, RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE
6ES7195-1GG30-0XA0
1x
SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR. OF 1 PS A.1 IM153 FUNCTION:INSERT/REMOVEMODULE WHILE OPERATING MODE RUN INCL. COVER FOR BUS UNIT
6ES7195-7HA00-0XA0
SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH
REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES /
STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECONDARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS /
SLOT
6ES7195-7HB00-0XA0
1x
1x
6x
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 92
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Industrial Communication
• Overview
• SINEMA Network Monitoring Software
• CP343-1 Advanced
• Switch X208
• Security Switch
• IWLAN
• FASTCONNECT Accessories Kit
• Development Kit
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 93
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SINEMA Network Monitoring Software V12
6 X SINEMA SERVER BASIC-50 V12
6GK1781-1BA12-0AA0
Totally
SINEMA SERVER 50 V12 NETWORK MONITORING SOFTWARE FOR 50 IP DEVICES VIA WEB BROWSER
Integrated
Automation
AUTOM. RECOGNITION+DISPLAY OF IE/PNIO/WLAN DEVICES+ TOPOLOGY IN NET. HMI INTEGRATION
PORTAL
VIA OPC/HTTP(S). REPORTING, STATISTICS + ALARMS SERVER OVERVIEW + ADAPTABLE PROFILES, SW,
MANUAL (DVD) + SINGLE LICENSE (USB) CLASS A, LANGUAGES (G,E,FR,CH); WIN XP+SP3 WIN 7+SP1
Check HW Compatibility
(32/64 BIT) + WIN SERVER 2008 R2+SP1
for TIA Portal 
SW functional identical to
the industrial version
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Authorization on USB-Stick
Order number:
6GK1950-0BB06
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 94
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC CP343-1 Advanced
1 x SIMATIC CP 343-1 Advanced
6GK7343-1GX31-0XE0
SIMATIC NET CP 343-1 ADVANCED; FOR CONNECTING SIMATIC S7-300 CPU TO IND. ETHERNET; PROFINET IO
CONTROLLER AND/OR IO-DEVICE; RT AND IRT MRP, PROFINET CBA; TCP/IP; ISO,UDP,S7-COM,S5-KOMP.
COM., (SEND/RECEIVE) W. FETCH/WRITE WITH AND WITHOUT RFC 1006, MULTICAST DIAGNOSIS EXTENSION,
SNMP, DHCP, FTP CLIENT/SERVER, E-MAIL, GIGABIT-SS1X RJ45 (10/100/1000) PROFINET-SS 2X
RJ45(10/100MBIT) PROFINET CBA; SECURITY (FIREWALL/VPN); PROFIENERGY
Recommended accessory:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0AA07
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 95
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Switch Technologies – Scalance X208 / SIMATIC NET
1 x SCALANCE X208
6GK5208-0BA10-2AA3
SIMATIC NET, SCALANCE X208, MANAGED IE SWITCH, 8 X 10/100MBIT/S RJ45 PORTS, LED
DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY,
PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER,
INCL. ELECTRONIC MANUAL ON CD
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
1 x SIMATIC NET, C-PLUG
6GK1900-0AB00
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE,
FOR STORAGE OF CONFIGURATION OR USER DATA, APPLICATION IN SIMATIC NET PRODUCTS
WITH C-PLUG SLOT
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessory:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0BB02
Core product
for vocational
World Cup
Industrial
Control 
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 96
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC NET Industrial Security Switch Technologies – SCALANCE S623
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
SIMATIC NET INDUSTR. ETHERNET SOFTNET SECURITY CLIENT V4+HF1 SW FOR CONFIGURING SAFE IP
BASED VPN-CONNECTIONS FROM PC/PG TO NETWORK SEGMENTS, WHICH ARE FUSED BY SCALANCE S,
SINGLE LICENSE F.1 INSTALLATION R-SW, SW + ELECTR. MAN. ON CD SW 2-LANGUAGES (G,E); MANUAL
5-LANG. (G, E, F, I, S) FOR WINDOWS 7 ULTIMATE, PROFESSIONAL, AND 32BIT WINDOWS XP PRO+SP3
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
2 x SIMATIC NET, C-PLUG
►
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE,
FOR STORAGE OF CONFIGURATION OR USER DATA
Operator control &
monitoring
►
Process Automation
Recommended accessory:
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
2 x SIMATIC NET SCALANCE S 623
6GK5623-0BA10-2AA3
SCALANCE S 623 MODULE FOR PROTECTION OF UNITS AND NETWORKS IN AUTOMATION TECHNOLOGY AND
FOR PROTECTION OF INDUSTRIAL COMMUNICATION VIA VPN AND FIREWALL; ADDITIONAL DMZ-PORT FOR
CONNECTING AN ADDITIONAL NETWORK ADDITIONAL FUNCTIONS: ADDRESS CONVERSION
1 x SOFTNET SECURITY CLIENT V4 + HF1
6GK1704-1VW04-0AA0
6GK1900-0AB00
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0BB03
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 97
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SIMATIC NET – IWLAN
1 x 6GK5774-1FX00-0AA0 (ROW version) or 6GK5774-1FX00-0AB0 (USA version)
IWLAN ACCESS POINT, SCALANCE W774-1 RJ45, 1 RADIO, 2 R-SMA ANT. CONNECT., IFEATURES ONLY WITHT KEY-PLUG, IEEE
802.11A/B/G/H/N, 2.4/5GHZ, GROSS DATA RATE 300 MBIT/S, 2 X RJ45 (MAX. 100 MBIT/S), POE INTEGRATED 2-PORT-SWITCH,
2 x 6GK5734-1FX00-0AA0 (ROW version) or 6GK5734-1FX00-0AB0 (USA version)
IWLAN CLIENT, SCALANCE W734-1 RJ45, 1 RADIO, 2 R-SMA ANT. CONNECT., IFEATURES ONLY WITH KEY-PLUG, IEEE
802.11A/B/G/H/N, 2.4/5GHZ, GROSS DATA RATE 300 MBIT/S, 2 X RJ45 (MAX. 100 MBIT/S), POE INTEGRATED 2-PORT-SWITCH,
2X24V DC, IP20
6 x 6GK5795-4MA00-0AA3
IWLAN ANTENNA ANT 795-4MA WITH OMNIDIRECTIONAL CHARACTERISTIC, RADIAL ROTAT., WITH ADDITIONAL JOINT, ANTENNA
GAIN: 3/5DBI, INCL. RSMA CONNECTOR, IP30 (-20-+60DGR C), 2.4/5 GHZ; DIRECT MOUNTING TO SCALANCE W WITH RSMA
CONNECTION TECHNOLOGY, SCOPE OF DELIVERY: 1X ANT795-4MA COMPACT INSTRUCTION ON PAPER GERMAN/ENGLISH
1 x 6GK5907-8PA00
KEY-PLUG W780, REPLACEABLE MEDIUM FOR ACTIVATING IFEATURES FOR SCALANCE W IN ACCESS POINT AND CLIENT MODE
AND FOR EASY REPLACEMENT OF DEVICE IN CASE OF FAILURE, AND FOR STORAGE OF CONFIGURATION DATA
2 x 6GK5907-4PA00
KEY-PLUG W740, REPLACEABLE MEDIUM FOR ACTIVATING
Recommended accessories:
IFEATURES FOR SCALANCE W IN CLIENT MODE…….
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
System requirements:
64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0BB14 (ROW version)
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6GK1950-0BB15 (USA version)
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 98
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
FASTCONNECT Accessories Kit
1 X 6GK1901-1GA00 FASTCONNECT STRIPPING TOOL
►
Industrial Controls
2 X 6GK1901-1BB10-2AB0 SIMATIC NET IE FC RJ45 PLUG 180 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2, 180 DGR CABLE OUTLET 1 PACK = 10 PCS
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
4 X 6GK1901-1BB20-2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2 90 DGR CABLE OUTLET 1 PACK = 1 PCS
1 X 6GK1901-0DB20-6AA8 SIMATIC NET IE FC M12 PLUG PRO M12 PLUG CONNECTOR WITH RUGGED METAL HOUSING AND FC
CONNECTING METHOD, WITH AXIAL CABLE OUTLET (D CODED)1 PACKAGE = 8 PCS FOR SCALANCE X208 PRO
AND ET 200 PRO PN
1 X 6GK1907-0DC10-6AA3 M12 CABLE CONN. PRO - SOCKET FOR CONNECTION OF SCALANCE W-700/X208PRO FOR 24V DC
VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PCS
1 X 50 M - 6XV1870-2B FLEXIBLE CABLE, GP 2X2 TP INSTALLATION CABLE WITH FLEXIBLE STRAND, PROFINET TYP B, 4WIRE
2 X 6XV1870-3RH60 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GK1950-0BB00
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 99
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Development Kit – PROFINET & PROFISAFE
1 x SIMATIC NET, DK-ERTEC 200 PN IO
DVELOPMENT PACKAGE FOR PN IO DEVICE
BASED ON ERTEC 200 INCL 10 ERTEC 200,
EVALUATION BOARD EB 200,
TEST-APPLICATION SOFTWARE,IE FC PLUG,
CABLE, STRIPPING TOOL, CP 1616,
DK-16XX PN IO, DOKU, V2.0 RT
AND IRT FUNCTIONALITY
6GK1953-0BA00
1 x PROFISAFE-STARTERKIT V3.4
(FOR V1-MODE AND V2-MODE PROFISAFE-DEVICES)
6ES7195-3BF02-0YA0
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Support by ComDeC - Communication, Development & Certification
Order number:
6ES7195-3BT02-0YA0
Version 02/2015
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 ComDec
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 100
►
Overview I List I Graphic I Cabinet
Digital Factory
Development Kit – PROFIsafe-Starterkit
Hardware
CP1616
• A PCI-card for the usage inside the PC as PROFINET IO Controller (test partner)
• The Evaluation Board 200 (EB 200) (for DK-ERTEC 200 PN IO V3.2)
• A testing environment for PROFINET IO Devices for custom based applications.
ERTEC ASICs
• For the development of custom based Hardware are included 10x ERTEC 200 (- for DK-ERTEC 200 PN IO V3.2)
PROFINET cabling/ -plugs
• For the configuration of a PROFINET cable are per Development Kit two FASTCONNECT plugs, one PROFINET cable, as well as one
Stripping Tool included.
Power Supply
• Every Development Kit contains one Universal AC adaptor to power the Evaluation Boards.
Documentation
• Comprehensive range of documentation in English and German language is included on the CD.
Software
• DK-ERTEC 200 PN IO V3.2
• PROFINET Device Stack including application examples in source code to port to the included Evaluation Board;
• DK-16xx PN IO;
• Firmware to engineer the test partner of the CP1616 to use with Linux or WINDOWS XP, or to port to other PC-based operating systems
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 101
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Development Kit – PROFIsafe-Starterkit
• Current PROFIsafe-specifications with current PROFIsafe-certificates
• PROFIsafe-driver-Software (as core components of the development kit)
Example-GSD-File for STEP 7 (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO)
Example-Project for S7-319F (for PROFIBUS DP/PA development kit DK-ERTEC 200 PN IO)
• GSD-Tools (i.e. GSD Editor and CRC-calculation-Tool)
• iParServer-Software and Tutorial (FB24)
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
• Tool-Calling-Interface-Example and Tutorial
• F-Programming-Guidelines
• Layer stack (V1SL and PN IO)
• Example-Firmware (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO)
Project for example for application development system environment (for PROFIBUS DP/PA development kit
and DK-ERTEC 200 PN IO)
Slow-Motion-Monitor (for PROFIBUS: PG-PC and CP5613, for PROFINET: PG-CP1616)
• Extensive documentation
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 102
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Sensor Technology
• Overview
• SIMATIC MV440 HR Code reader
• SIMATIC RF200 RFID System
• SIMATIC RF300 RFID System
• SIWAREX Weighing systems
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 103
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC MV440 HR CODE READER
1 X SIMATIC MV440 HR CODE READER RESOLUTION: 1024 X 768 PIXEL; FOR 1D/2D CODES AND OCR
1 X TEXT-GENIUS PLUS; READING OF 1D BAR CODES AND 2D MATRIX CODES, TEXT RECOGNITION;
OCR LICENSE FOR MV440 CODE READING SYSTEMS; SINGLE LICENSE
1 X PAT-GENIUS FORM RECOGNITION, OBJECT RECOGNITION LICENSE FOR MV440 CODE READER UNITS
1 X MV440 MOUNTING PLATE READER VERY STURDY (4MM MATERIAL)
1 X POWER-IO-RS232 CABLE 10M FOR MV 400 UNITS LENGTH: 10M
1 X MINI LENS 16 MM, 1:1.4 PENTAX C1614-M(KP)
1 X D65 LENS PROTECTION METAL-GLASS IP67 DEGREE OF PROTECTION FOR MV440 DEVICES
1 X INTERMEDIATE RING SET 0.5/1/1MM
1 X BUILT-IN RING LIGHT RED FOR ALL MV440 DEVICES
1 X BUILT-IN RING LIGHT WHITE FOR ALL MV440 DEVICES
1 X IE CONNECTING CABLE M12-180/IE FC RJ45 PLUG-145; LENGTH 10.0 M
6GF3440-1GE10
6GF3400-1SL01
6GF3400-0SL03
6GF3440-8CA
6GF3440-8BA2
6GF9001-1BF01
6GF3440-8AC11
6GF9001-1BU01
6GF3440-8DA11
6GF3440-8DA21
6XV1871-5TN10
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
Parameterization with web-based user interface with browser (as of IE5.5), JAVA-VM (MS, SUN)
Order number:
6GF3400-0TP03
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 104
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC MV440 HR CODEREADER
1x MV440
CODE READER
1x Lens 12mm
BUILT-IN RING LIGHT
6GF9001-1BL01
1x 6GF3440-8DA11 Red
1x 6GF3440-8DA21 White
6GF3440-1GE10
1x TEXT-GENIUS PLUS
6GF3400-1SL01
1x MOUNTING PLATE
1x INTERMEDIATE RING
1x PROTECTION HOUSING
6GF3440-8CA
6GF9001-1BU01
6GF3440-8AC11
1x PAT-GENIUS
6GF3400-0SL03
1x IE CABLE
6XV1871-5TN10
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
1x POWER CABLE
6GF3440-8BA2
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 105
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC RFID – RF200
2
SIMATIC RF200 READER RF240R; RS422-INTERFACE (3964R); WITH INTEGRATED ANTENNA
1
RFID COMMUNICATION MODULE RF180C FOR PN; 2 READERS CONNECTABLE; WITHOUT CONNECTING
BLOCK FOR PROFINET
RFID PROFINET- / ETHERNET- CONNECTING BLOCK PUSH-PULL RJ45 FOR RF180C, RF182C
1
1
1
6GT2002-2JD00
POWER PLUG PRO, 5-POLE PUSH PULL POWER PLUG FOR ON-SITE MOUNTING (PACKAGING UNIT: 1 PLUG) 6GK1907-0AB10-6AA0
IE FC RJ45 PLUG PRO; IP65; FAST CONNECT; IE; RJ45 PUSH PULL PLUG FOR ON-SITE MOUNTING TO IE FC
6GK1901-1BB20-6AA0
5
TP CABLE 2X2; (PACKAGING UNIT 1 PLUG)
SIMATIC RF, MV CONNECT. CABLE, PREASSEMBLED, BETWEEN ASM 456, RF160C, RF170C, RF18XC AND
READER OR EXTENSION CABLE FOR ASM 456, RF160C, RF170C, RF18XC WITH RF, MV, MOBY PUR, CMG,
LENGTH 2 M
RFID SYSTEMS SOFTWARE & DOCUMENTATION ON DVD, FB/FC FOR SIMATIC, RFID PC LIBRARIES, RFID
TOOLS
MOBY D / RF300 ISO / RF200 TRANSPONDER MDS D400 ISO-CARD, 2000 BYTE (NETTO)
5
MOBY D / RF300 ISO MOBILE DATA STORAGE MDS D460, ACCORDING TO ISO 15693; 2000 BYTE FRAM;
5
MOBY D / RF300 ISO SPACER FOR MDS D160 / MDS D460; DIAMETER 20 MM; HEIGHT 15 MM
5
RF200 / RF300 ISO TRANSPONDER MDS D423; TRANSPONDER IN AND ON METAL ACCORDING;2000 BYTE
FRAM
2
1
6GT2821-4AC10
6GT2002-0JD00
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GT2096-3AA00-0AA0
6GT2891-4FH20
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
6GT2080-2AA20
6GT2600-4AD00
6GT2600-4AB00
6GT2690-0AG00
6GT2600-4AA00
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 106
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC RFID – RF200
2 x RF200 READER
RF240R
5 x TRANSPONDER
MDS D400 ISO-CARD
1 x COMMUNICATION 1 x PROFINET/ETHERNET 1 x POWER PLUG PRO
MODULE RF180C
CONNECTING BLOCK
5 x MOBILER
5 x SPACER
5 x TRANSPONDER
1 x PUSH PULL PLUG
2 x Terminal Cable
DATA STORAGE
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1x RFID- Software and
documentation
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 107
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC RFID – RF300
1
RFID COMMUNICATION MODULE RF180C FOR PROFINET; 2 READERS CONNECTABLE
6GT2002-0JD00
►
Industrial Controls
1
RFID PROFINET-/ETHERNET- CONNECTING BLOCK
6GT2002-2JD00
►
Engineering
Software
2
RF300/600 CONN. CABLE PREASSEMBLED, LENGTH: 2 M
6GT2891-4FH20
►
SIMIT Simulation
1
RFID SYSTEMS SOFTWARE PACKAGE AND DOCUMENTATION ON CD
6GT2080-2AA20
►
Basic Automation
1
RF300 READER RF340R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA
6GT2801-2AB10
►
Controller/PLC
1
POWER PLUG PRO, 5-POLE PUSH PULL
6GK1907-0AB10-6AA0
►
Distributed IOs
1
RF300 READER RF310R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA
6GT2801-1AB10
►
Operator control &
monitoring
5
TRANSPONDER RF340T 8 KBYTE FRAM
6GT2800-4BB00
►
Process Automation
10
TRANSPONDER RF360T EPOXY-CARD, 8 KBYTE FRAM
6GT2800-4AC00
►
Industrial
Communication
20
MOBY D / RF300 ISO MOBILE DATA MEMORY MDS D124 , 112 BYTE EEPROM
6GT2600-0AC10
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6GT2096-1AA00-0AA0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 108
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC RFID – RF300
SIMATIC
RF180C
1x Software and
documentation
SIMATIC
RF180C
Tank monitoring by RFID Nameplates, documentation of
process data
1x SIMATIC RF310R
Reader 55x75x30
1x SIMATIC RF340R
Reader 75x75x41
1x PROFINET
Communication
Module RF180C with RJ45
Connector Terminal Block
in IP67
5x SIMATIC RF340T
Transponder
8kByte Memory
10x SIMATIC RF360T
Transponder
8kByte Memory
1x Power Supply
Cable for RF180C
2x Terminal Cable between
Reader RF340R and
Connect Module RF180C
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
20x MDS D124
Mobile data memory
112 Byte EEPROM
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 109
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMATIC SIWAREX Weighing Systems
1 x SIWAREX FTA
- Project engineering package FTA
- Connecting cable (RS232C)
- Documentation on CD
1 x SIWAREX U
- Project engineering package U
- Connecting cable (RS232C)
- Documentation on CD
1 x Load cell series BB, nominal load 10kg
Load cell series BB
SIWAREX U
SIWAREX FTA
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1 x base plate with overload protection
1 x Elastomer bearing
1 x License agreement
System requirements:
None
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
7MH4901-0AA10
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 110
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Drive Technology
• Overview
• SINAMICS G120 Standard drive
230V
400V
• SINAMICS S120 Servo drive
230V
400V
• SIMOTION D410 Add-on for S120
 Curriculums
 Learning Systems
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 111
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SINAMICS G120 standard drive 1 AC 230V network
Overview
Software
Startdrive/STARTER
Circuit breaker
G120-Trainer Package 1AC 230V – 0.55kW PROFINET
PC converter connection kit
Control Unit
PROFINET CU250S-2 PN
with OPERATOR
PANEL (IOP)
Asynchronous motor
Power module
PM240-2 – 0.55kW
without EMV filter
i.e.. 1Le1
With power 0.55kW
Power line
S7 controller
Not part of the package
* V13: also 64 BIT Windows 8.1
Professional, Enterprise
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
See next slides
Order number:
6SL3200-3AX00-0UL1
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 112
Version 02/2015
 Download STARTER
Overview I List I Graphic I Cabinet
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Core product
for vocational
World Cup
Industrial
Control 
 Download Startdrive
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 1 AC 230V-Network
1
SINAMICS G120 POWER MODULE PM240-2
WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER
1/3AC200-240V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0,55KW FOR 200% 3S,150% 57S,100%
240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 0,75KW FOR 150% 3S,110%
57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20
WITHOUT CONTROL UNIT AND OPERATOR PANEL APPROVED FOR CU FIRMWARE VERSION V4.6
6SL3210-1PB13-8UL0
SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRATED PROFINET SUPPORT OF VECTOR
CONTROL, EASY POSITIONING EPOS VIA EXTENDED FUNCTION LICENSE
4 CONFIGURABLE DI/DO, 6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI,
2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA
”EXTENDED SAFETY” LICENSE, ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL
DEGREE OF PROTECTION IP20 USB AND SD/MMC INTERFACE
6SL3246-0BA22-1FA0
1
SINAMICS SD-CARD 512 MB EMPTY
6SL3054-4AG00-2AA0
1
SINAMICS G120 SHIELD CONNECTION KIT 4 INCLUDES SCREENING PLATE AND FIXING ELEMENTS
FOR CONTROL UNITS CU250S-2 VERSION: USS, CAN, DP, PN
1
1
SINAMICS G120 INTELLIGENT OPERATOR PANEL IOP OPTIONAL OPERATOR PANEL FOR
SINAMICS G120, G120P, G110M, G110D, G120D, G120C, S110, ET200S FC, ET200PRO FC
6SL3255-0AA00-4JA1
1
SINAMICS G120 PC CONVERTER CONNECTION KIT 2 3M USB CABLE FOR CONTROL UNITS
CU230P-2, CU240B-2, CU240E-2, CU250S-2, G110M AND SINAMICS G120C
6SL3255-0AA00-2CA0
1
SINAMICS LICENSE SAFETY INTEGRATED EXTENDED FUNCTIONS FOR MEMORY CARD
6SL3074-0AA10-0AA0
1
SINAMICS G120 LICENSE EXTENDED FUNCTIONS FOR MEMORY CARD OF
CU250S-2 VECTOR FOR FUNCTIONALITY: EPOS
6SL3074-7AA04-0AA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 113
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 1 AC 230V network
Optional motors
SIMOTICS GP Low-voltage motor without encoder
1LE1003-0DB22-2AB4
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL.,
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M *
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION,
1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP
SIMOTICS GP Low-voltage motor with HTL encoder
1LE1003-0DB22-2AB4-Z G01
Z= G01 with HTL encoder SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRRELCAGE, SELF-VENTIL., IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM
EFFICIENCY, 4POLE * FS80M * 0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY
IM B 3, MOTOR PROTECTION WITH 1 PTC THERMISTOR FOR SHUTDOWN G01=MOUNTING ROTARY
PULSE ENCODER 1XP8012-10 (HTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-10 IS USED
SIMOTICS GP Low-voltage motor with TTL encoder
1LE1003-0DB22-2AB4-Z G02
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL.,
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M *
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP G02=MOUNTING A ROTARY PULSE
ENCODER 1XP8012-20 (TTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-20 IS USED
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 114
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 1 AC 230V network
Optional hardware
SINAMICS LINE REACTOR (lateral configuration) )
6SL3203-0CE13-2AA0
380-480V 3AC 47-63HZ, I_LN = 4.0A, STANDALONE
3RV2…
CIRCUIT BREAKER SZ S0
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 115
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 1 AC 230V-Network
Optional software
STARTER
COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.4.3
6SL3072-0AA00-0AG0
STARTDRIVE
ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13 SP1
6SL3072-4AD02-0XG0
SIZER
CONFIGURATION TOOL FOR SIEMENS DRIVES
6SL3070-0AA00-0AG0
DRIVE ES BASIC V5.5 SP4
ENGINEERING-SW FOR DRIVES
5-LANGUAGE DVD WITH ELECTRONIC DOCUMENTATION, FOR STEP 7 V5.5 SP2
FLOATING LICENSE
6SW1700-5JA00-5AA0
DRIVE ES SIMATIC V5.5 SP1
DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTRONIC
DOCUMENTATION
6SW1700-5JC00-5AA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Matching: Trainer Package SIRIUS Industrial Controls 3TK3388-0TP00
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 116
Version 02/2015
 Download STARTER
Overview I List I Graphic I Cabinet
 Download Startdrive
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 3 AC 400V-Network
Overview
Software
Startdrive/STARTER
Circuit breaker
G120-Trainer Package 3AC 400V – 0.55kW PROFINET
PC CONVERTER CONNECTION KIT
Control Unit
PROFINET CU250S-2 PN
With OPERATOR
PANEL (IOP)
Asynchronous motor
Power module
PM240-2 – 0.55kW
without EMV filter
i.e.. 1Le1
With power: 0.55kW
Power line
S7 controller
Not part of the package
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
See slides below
Order number:
6SL3200-3AX00-0UL2
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 117
Version 02/2015
 Download STARTER
Overview I List I Graphic I Cabinet
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 Download Startdrive
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 3 AC 400V network
1
1
SINAMICS G120 POWER MODULE PM240-2
6SL3210-1PE12-3UL1
UNFILTERED WITH INTEGRATED BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH
OVERLOAD: 0.55KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP. -10 TO +50 DEG C OUTPUT
LOW OVERLOAD: 0.75KW AT 150% 3S,110% 57S,100% 240S AMBIENT TEMP. -10 TO +40 DEG C 196 X 73
X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND OPERATOR PANEL APPROVED
FOR CU FIRMWARE VERSION V4.6
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRATED PROFINET SUPPORT OF VECTOR
6SL3246-0BA22-1FA0
CONTROL, BASIC POSITIONER EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6
DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI,
2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA “EXTENDED SAFETY”
LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL DEGREE OF PROTECTION
IP20 USB AND SD/MMC INTERFACE
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
1
SINAMICS SD CARD 512 MB EMPTY
6SL3054-4AG00-2AA0
1
SINAMICS G120 SHIELD CONNECTION KIT 4 INCLUDES SCREENING PLATE AND FIXING ELEMENTS
FOR CONTROL UNITS CU250S-2 VERSION: USS, CAN, DP, PN
6SL3264-1EA00-0LA0
1
SINAMICS G120 INTELLIGENT OPERATOR PANEL IOP OPTIONAL OPERATOR PANEL FOR
SINAMICS G120, G120P, G110M, G110D, G120D, G120C, S110, ET200S FC, ET200PRO FC
6SL3255-0AA00-4JA1
1
SINAMICS G120 PC CONVERTER CONNECTION KIT 2 3M USB CABLE FOR CONTROL UNITS
CU230P-2, CU240B-2, CU240E-2, CU250S-2, G110M AND SINAMICS G120C
6SL3255-0AA00-2CA0
1
SINAMICS LICENSE SAFETY INTEGRATED EXTENDED FUNCTIONS FOR MEMORY CARD
6SL3074-0AA10-0AA0
1
SINAMICS G120 LICENSE EXTENDED FUNCTIONS FOR MEMORY CARD OF
CU250S-2 VECTOR FOR FUNCTIONALITY: EPOS
6SL3074-7AA04-0AA0
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 118
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 3 AC 400V network
Optional motors
SIMOTICS GP Low-voltage motor without encoder
1LE1003-0DB22-2AB4
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL.,
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M *
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP
SIMOTICS GP Low-voltage motor with HTL encoder
1LE1003-0DB22-2AB4-Z G01
Z= G01 with HTL encoder SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRRELCAGE, SELF-VENTIL., IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM
EFFICIENCY, 4POLE * FS80M * 0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY
IM B 3, MOTOR PROTECTION WITH 1 PTC THERMISTOR FOR SHUTDOWN G01=MOUNTING ROTARY
PULSE ENCODER 1XP8012-10 (HTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-10 IS USED
SIMOTICS GP Low-voltage motor with TTL encoder
1LE1003-0DB22-2AB4-Z G02
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL.,
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M *
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP G02=MOUNTING ROTARY PULSE
ENCODER 1XP8012-20 (TTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-20 IS USED
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 119
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 3 AC 400V network
Optional hardware
SINAMICS LINE REACTOR (lateral configuration)
380-480V 3AC 47-63HZ, I_LN = 4.0A, STANDALONE
6SL3203-0CE13-2AA0
3RV2…
CIRCUIT BREAKER SZ S00
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Matching: Trainer Package SIRIUS Industrial Controls 3TK3388-0TP00
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 120
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
SINAMICS G120 standard drive 3 AC 400V network
Optional software
STARTER
COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.4.3
6SL3072-0AA00-0AG0
STARTDRIVE
ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13 SP1
6SL3072-4DA02-0XG0
SIZER
CONFIGURATION TOOL FOR SIEMENS DRIVES
6SL3070-0AA00-0AG0
DRIVE ES BASIC V5.5 SP4
ENGINEERING SW FOR DRIVES,
5-LANGUAGE DVD WITH ELECTRONIC DOCUMENTATION FOR STEP 7 V5.5 SP2
FLOATING LICENSE
6SW1700-5JA00-5AA0
DRIVE ES SIMATIC V5.5 SP1
DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTRONIC
DOCUMENTATION
6SW1700-5JC00-5AA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Matching: Trainer Package SIRIUS Industrial Controls 3TK3388-0TP00
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 121
Version 02/2015
 Download STARTER
Overview I List I Graphic I Cabinet
 Download Startdrive
 TIA Portal
Digital Factory
SINAMICS G120 – Information
Catalog note
SINAMICS G120: Siemens D31
Asynchronous motors: Siemens D81.1
Helpful information to download
 SINAMICS G120C
 Energy saving with SINAMICS G120
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 122
Version 02/2015
 Download STARTER
Overview I List I Graphic I Cabinet
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 Download Startdrive
 TIA Portal
Digital Factory
SINAMICS S120 servo drive 1 AC 230V network
In Preparation
►
Industrial Controls
►
Engineering
Software
Asynchronous motor
►
SIMIT Simulation
i.e. LA7070-4 with rated
output: 0,25 kW , 4-pole,
1350 rpm, with/without
speed actual value encoder
with sensor module SMC30
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Circuit breaker
S120 Package 1AC 230V – 0.37kW PROFINET
Software in Package
DCC SINAMICS
SIZER
CAD CREATOR
Starter
PROFINET
Control Unit
PROFINET
CU310 PN
Compact Flash Card
S7
controller
Option 1
Network supply
3 AC 230V 50Hz
commutation choke
Power module
PM340 - 0.37kW
with integrated filter
Option 2
Servo motor
i.e. 1FK7022 with 0.85 Nm
torque, 6000 rpm,
incremental encoder with
DRIVE-CliQ
Power line
Basic Operator Panel
Option 3
Sensor cable Drive-CLIQ
External Power Supply
Terminal Module TM31
24V Power supply for
CU310 and
S120 Power module
Expansion of number of digital
inputs/outputs and analog
inputs/outputs
Servo motor
i.e. 1FK7022 with 0.85 Nm
torque, 6000 rpm, absolute
encoder with DRIVE-CliQ
Safety Module TM 54 F option
4 failsafe digital outputs
10 failsafe digital inputs
Not part of the package
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 123
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SINAMICS S120 servo drive 1 AC 230V network
In Preparation
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Technical note:
Order number:
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 124
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SINAMICS S120 servo drive 3 AC 400V network
In Preparation
►
Industrial Controls
►
Engineering
Software
Asynchronous motor
►
SIMIT Simulation
i.e. 1LA7096-4
power 1.5 kW, 4-pole,
1420 rpm, with / without
speed actual value
encoder via
sensor module SMC30
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Circuit breaker
S120 Package 3AC 400V – 1.5kW PROFINET
Software in Package
DCC SINAMICS
SIZER
CAD CREATOR Starter
PROFINET
Control Unit
PROFINET
CU310 PN
Compact Flash Card
S7
controller
Option A
Network supply
3 AC 400V 50Hz
with circuit breaker,
EMC filter,
commutation choke
Power module
PM340 – 1.5 kW
Option B
i.e. 1FK7042
with 3.0 Nm torque,
3000 rpm
incremental encoder
with DRIVE-CliQ
Power line
Basic Operator Panel
Option C
Sensor cable Drive-CLIQ
External Power Supply
Terminal Module TM31
24V Power supply for
CU310 and
S120 Power module
Expansion of number of digital
inputs/outputs and analog
inputs/outputs
Servo motor
Servo motor
i.e. 1FK7042
Torque 3000 rpm
absolute encoder
with DRIVE-CliQ
Safety Module TM 54 F option
4 failsafe digital outputs
10 failsafe digital inputs
Not part of the package
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 125
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SINAMICS S120 servo drive 3 AC 400V network
In Preparation
Systemvoraussetzung:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, for in-house vocational training departments
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Technical note:
Order number:
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 126
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMOTION D410-2 add on for SINAMICS S120
1- and 3- phase
SIMOTION D410-2 is a single-axis system, which can be used in combination with SINAMICS S120
AC/AC Power Module.
SIMOTION D410-2 is the entry level controller in the SIMOTION D family.
SIMOTION D410 is the ideal controller, if Motion Control for a single-axis and PLC functionality
is demanded in a small form factor.
PROFINET IO with IRT (with D410-2 PN/DP) enables various connectivity with HMI and distributed IOs.
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 127
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMOTION D410-2 add-on for SINAMICS S120
1
1
1
1
1
SIMOTION DRIVE-BASED CONTROL UNIT D410-2 DP/PN; PROGRAMMABLE SINGLE AXIS
MOTION CONTROL WITH MULTIPLE AXES OPTION; INTERFACES: 5 DI, 8 DI/DO,
3 F-DI, 1 F-DO, 1 AI,1 ENCODER, 1 DRIVE-CLIQ,1 PROFIBUS, 2 PROFINET PORTS,1 ETHERNET
6AU1410-2AD00-0AA0
SIMOTION DRIVE-BASED 1 GB COMPACT FLASH CARD D410-2; SINAMICS DRIVE SOFTWARE V4.X
AND SIMOTION KERNEL FOR SIMOTION D410-2; UP-TO-DATE SOFTWARE VERSION; NOTE: NOT
FOR SIMOTION D410, D4X5 AND D4X5-2
6AU1400-1PA23-0AA0
SIMOTION ENGINEERING SYSTEM SCOUT AND SCOUT TIA V4.4 FULL LICENSE DVD INCL. STARTER, 6AU1810-1BA44-0XA0
RUNTIME, TECHN., DOCUMENTATION FREE UTILITIES
SIMOTION ENGINEERING SYSTEM DCC SIMOTION V2.3 FULL LICENSE DCC FOR SIMOTION AND FOR 6AU1810-1JA23-0XA0
SINAMICS OPTION FOR SCOUT V4.4 AND FOR STARTER V4.4 SUPPLIED ON DATA STORAGE MEDIUM
DVD INCL: FLOATING LICENSE
6AU1820-8BD20-0AB0
SIMOTION IT COMPREHENSIVE IT FUNCTIONS WITH JAVA VIRTUAL MACHINE: RUNTIME
ENVIRONMENT FOR JAVA APPLICATIONS ON SIMOTION LICENSE (COL) INCLUDES THE FOLLOWING
LICENSES:
SIMOTION IT DIAG: 6AU1820-8BA20-0AB0
SIMOTION IT OPC XML-DA: 6AU1820-8BB20-0AB0
System requirements:
64 BIT: Windows 7 Professional, Ultimate SP1
32 BIT: Windows 7 Professional, Ultimate SP1
Sales note:
Technical note:
Schools, colleges and universities, for in-house vocational training departments
See slides below
Order number:
6SL3080-8LA00-0AA0
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 128
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
SIMOTION D410 add on for SINAMICS S120
Optional software and hardware
SIMOTION ENGINEERING SYSTEM SCOUT STANDALONE SOFTWARE CARE SERVICE
6AU1810-0BA00-0XL0
SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE-CLIQ CABLE ADD-ON MODULE
FOR SINAMICS CONVERTERS WITH DIGITAL AND ANALOG INPUTS AND OUTPUTS
6SL3055-0AA00-3AA1
SIGNAL CABLE; DRIVE-CLIQ MOTION CONNECT 500 IP20/IP20 LENGTH 0.95 m
6SL3060-4AA10-0AA0
Recommended accessories:
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
6GK1950-0BB00
Trainer Package: FASTCONNECT
connection technology
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Note: When selecting motors, please contact your local Siemens technical sales department
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 129
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
CNC Software
• Overview
• SinuTrain Operate
• SinuTrain Operate Students Package
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 130
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Trainer Package – SinuTrain for SINUMERIK Operate V4.5
1 x SinuTrain Trainer Package Classroom license for 6 PCs
2 x SinuTrain Student Package 6FC5870-1SC41-0YA0
Students
SinuTrain for SINUMERIK OPERATE 4.5 is applicable for
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC SOFTWARE 4.5
1x Classroom license
2x20 Student licenses
300 hours each
SinuTrain V4.5 for in-house vocational training departments: See bottom right
Training manuals
1x Easy milling with ShopMill
1x Easy turning with ShopTurn
1x First-Time User Instructions
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, not for in-house vocational training departments
Technical note:
None available
Order number:
6FC5870-1TC41-0YA0
Version 02/2015
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 SinuTrain V4.5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 131
►
Overview I List I Graphic I Cabinet
Digital Factory
Student package – SinuTrain for SINUMERIK Operate V4.5
Students
SINUTRAIN for SINUMERIK OPERATE VERSION 4.5
20 STUDENT PACKAGE for 300 hours
SinuTrain for SINUMERIK OPERATE 4.5 is applicable for
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC-SOFTWARE 4.5
SinuTrain V4.5 for in-house vocational training departments: See bottom right
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
Sales note:
Schools, colleges and universities, for in-house vocational training departments
Technical note:
None available
Order number:
6FC5870-1SC41-0YA0
Version 02/2015
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 SinuTrain V4.5
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 132
20x Students versions
each 300 hours
►
Overview I List I Graphic I Cabinet
Digital Factory
Trainer Package – SinuTrain for SINUMERIK Operate V4.4
1 x SinuTrain Trainer Package Classroom license for 16 PCs
6FC5870-8YC40-2YA0
Students
1 x SinuTrain Student Package
6FC5870-1SC40-1YA0
32 Student licenses
300 hours each
SinuTrain for SINUMERIK OPERATE 4.4 is applicable for
• SINUMERIK 840D SL with SW V2.7 and V4.4
• SINUMERIK 828D/828D BASIC with SW V2.7 and V4.4
SinuTrain V4.4 for in-house vocational training departments: See bottom right
Training manuals
1x Easy milling with ShopMill
1x Easy turning with ShopTurn
1x First-Time User Instructions
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, not for in-house vocational training departments
Technical note:
None available
Order number:
6FC5870-1TC40-1YA0
Version 02/2015
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
 SinuTrain V4.4
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 133
1x Classroom license
►
Overview I List I Graphic I Cabinet
Digital Factory
Student package – SinuTrain for SINUMERIK Operate V4.4
SINUMERIK 828D/828D BASIC WITH SW 2.7 AND 4.4
SINUMERIK 840D SL WITH CNC SW 2.7 AND 4.4
EDUCATION SW ON DVD
SINUTRAIN FOR SINUMERIK OPERATE
Students
SinuTrain FOR SINUMERIK OPERATE 4.4 IS APPLICABLE FOR
• SINUMERIK 840D SL WITH SW V2.7 AND V4.4
• SINUMERIK 828D/828D BASIC WITH SW V2.7 AND V4.4
32x Student licenses
300 hours each
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
SinuTrain V4.4 for in-house vocational training departments: See bottom right
System requirements:
64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
Schools, colleges and universities, not for in-house vocational training departments!
Technical note:
None available
Order number:
6FC5870-1SC40-1YA0
 SinuTrain V4.4
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 134
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Siemens Product Lifecycle Management (PLM) Software
• Overview
• PLM Software
 Curriculums
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 135
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
PLM Software
 NX, with new tools and technologies, the latest release of NX delivers productivity throughout
product development. See how NX can help you accelerate your design, engineering, and
manufacturing processes.
 Tecatix, is a comprehensive portfolio of digital manufacturing solutions that deliver innovation
by linking all manufacturing disciplines together with product engineering – from process layout
and design, process simulation and validation, to manufacturing execution.
 Teamcenter, helps you deliver increasingly complex products to market while maximizing
productivity and streamlining global operations.
Velocity Series, Powerful and easy-to-use software tools for product development. Solid Edge,
Femap, CAM Express and 3D Sync.
 Solid Edge Highschool  Solid Edge Students
Kontakt Partner
Germany:
Austria:
Switzerland:
Other Countries:
Karl Hermann Dietz
[email protected]
Hermann Kaineder
[email protected]
Marika Kerschbaumer [email protected]
[email protected]
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 136
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Important Notes
• Overview
• WorldSkills
• Purchasing Remarks for SCE Trainer Packages
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 137
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
WorldSkills – Cooperation to improve vocational training
WorldSkills International (WSI)
• WSI promotes the quality of vocational training for more than 60 years
• WSI organizes biannually a WorldSkills competition (WSC) with national
preliminaries
• With > 50 participating countries, > 1000 Competitors >200,000 visitors
• London2011, Leipzig2013, São Paulo2015, Abu Dhabi 2017, …
Siemens SCE = Global Industry Partner (GIP) and Product Sponsor
For example in the discipline Industrial Control (Skill 19) the best young
skilled workers from over 20 countries compete with Products from
the Siemens Industry Sector.
Videos: youtu.be/jTnzGm51V_A
youtu.be/JokhkRgFMPg
Blog: WorldSkillsLeipzig2013
SCE promotes excellence in vocational training together with WSI
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 138
Version 02/2015
Overview I List I Graphic I Cabinet
Digital Factory
Purchasing Remarks of SCE Trainer Packages
For the purchasing of SCE Trainer Packages, a special supplementary agreement is required.
The General License Conditions for Software Products for Industry Automation and Drive Technologies
apply for software products. For trainer packages, the “Additional Agreement for SIMATIC Software for
Class-Room use at research-, development- and education institutions„ has to be signed and send for
release of the delivery to SCE Team global.
SCE Contact partner will find these at SCE Intranet:  Additional Agreement
Release for delivery
Trainer packages are released trough Siemens AG, SCE Team global
Contact Partner: Christian Callegari Fax: +49 (0)911-895-133992 und [email protected]
Exception: The following Trainer packages are not intended for vocational in-house training Departments.
SIMATIC S7-1516 PN/DP
SIMATIC STEP 7 Trainer package (12er Classroom License)
Upgrade SIMATIC STEP 7 Trainer package (12er Classroom License)
SIMATIC S7 Software for Students
SinuTrain Operate
SinuTrain Operate for Students
Students
Students
6ES7516-3AN00-4AB3
6ES7822-1BA03-4YA5
6ES7822-1AA03-4YE5
6ES7822-1AC03-4YA5
6FC5870-1T…
6FC5870-1S…
►
Industrial Controls
►
Engineering
Software
►
SIMIT Simulation
►
Basic Automation
►
Controller/PLC
►
Distributed IOs
►
Operator control &
monitoring
►
Process Automation
►
Industrial
Communication
►
Sensor Technology
►
Drive Technology
►
CNC Software
►
PLM Software
►
Important Notes
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 139
Version 02/2015
Overview I List I Graphic I Cabinet
 TIA Portal
Digital Factory
Thank you for your attention!
Christian Callegari
SCE Team global
E-Mail: [email protected]
siemens.com/sce
Unrestricted / © Siemens AG 2015. All Rights Reserved.
Page 140
Version 02/2015
Digital Factory
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement