Fusion Research Play
Fusion Research Play-Fi v1
Module Application Guide
Description
This module provides two way control of a Fusion Research Play-Fi Server. For control of the OMS
please refer to the OMS help file.
Supported Processors
Any 2-series with an Ethernet card or 3-series processor is supported.
Compatibility
Processor Requirements
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Setup and Configuration
General Setup
The Play-Fi is setup with the Ovation Configuration Utility which can be obtained from the
Fusion Research website. Begin setting up the Play-Fi Server by following the steps using the
configuration wizard. When you reach the section titled Play-FI Virtual Matrix Switch, choose
“Configure Play-Fi Virtual Switch…” to see the speaker configuration.
Here you can view the speakers the Play-Fi Server can see and the associated output
number. By clicking on a speaker and selecting edit you can name the output, change an
output’s number, and see the output’s online status in this tool. For the Crestron module to
work, the speaker must be “online”. The Crestron module is broken up into controls for each
virtual output.
The Output 1 section on the module corresponds to output 1 in the above dialog box. Apply
the changes and complete the setup.
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Ethernet
This module utilizes direct sockets to communicate with the Fusion Play-Fi. ControlWorks
recommends setting a static IP addresses to the Play-Fi hardware. The IP address is easily
obtainable by using the Ovation Configuration Utility. Simply click the “…” button for the
information regarding your Play-Fi server. Enter the IP address of the server into the parameter
of the module labeled “Play-Fi Server IP Address”.
Polling Frequency and TCP/IP Queue
The Play-Fi server does not provide unsolicited feedback and must be polled if feedback is
desired. The module allows you to determine the poll cycle for each output with a digital input
that will query for the associated output. When a command is sent for an output i.e. changing an
output, the Server will respond with that outputs current state.
All commands are entered into a SIMPL+ queue. Each command that enters the queue will be
sent in the order it is received. The module has a built in timeout that will force the connection
closed if no response is heard from the server after 30 seconds. The queue will then advance to
the next command if any exists.
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Signal and Parameter Descriptions
Bracketed signals such as “[signal_name]” are optional signals
DIGITAL INPUTS
reboot_finished ..........................................................Latch this signal high after startup is complete. See
demo program for example.
[outputx_off] .............................................................disconnects the output from whatever input is
connected.
[outputx_inc_volume].................................................increments the outputs speaker level by the
Increment-Decrement Volume Level Value parameter.
[outputx_dec_volume] ................................................decrements the outputs speaker level by the
Increment-Decrement Volume Level Value parameter.
[outputx_mute_on] ....................................................mutes the output but does not break the audio route.
[outputx_mute_off] ....................................................unmutes the output but does not break the audio
route.
[outputx_mute_toggle] ...............................................toggles the output mute but does not break the audio
route.
[outputx_query_status] ..............................................pulse to retrieve the current status of the output.
ANALOG INPUTS
[outputx_send_to_input] ............................................initialize to route an input to the speaker output.
[outputx_goto_volume_0-100] ....................................initialize to a volume level 0-100d. This input should
not be ramped.
SERIAL INPUTS
This module does not utilize serial inputs.
DIGITAL OUTPUTS
[outputx_off_fb] ........................................................Feedback if the output is not routed to any input.
[mute_on_fb] ............................................................Feedback if the output is currently muted.
ANALOG OUTPUTS
[outputx_source_fb] ...................................................Feedback of currently routed input.
[outputx_volume_0-100_fb] ........................................Feedback of current volume.
SERIAL OUTPUTS
[outputx_device_id$]..................................................reports the MAC address of the speaker attached to the
output.
PARAMETERS
Increment-Decrement Volume Level Value ....................Enter the amount of volume that the
[output1_inc_volume] or [output1_dec_volume]
volumes will increment or decrement the volume by. 0100d
Play-Fi Server IP Address ............................................Enter the IP address of the Play-Fi server.
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Support
This module is supported by ControlWorks Consulting, LLC. Should you need support for this
module please email [email protected] or call us at 440-449-1100. ControlWorks
normal office hours are 9 AM to 5 PM Eastern, Monday through Friday, excluding holidays.
Before calling for support, please ensure that you have loaded and tested operation using the
included demonstration program and touchpanel(s) to ensure that you understand the correct
operation of the module. It may be difficult for ControlWorks to provide support until the
demonstration program is loaded.
Updates, when available, are automatically distributed via Email notification to the address
entered when the module was purchased. In addition, updates may be obtained using your
username and password at https://www.controlworks.com/Customers/Login.aspx.
Distribution Package Contents
The distribution package for this module should include:
Fusion
Fusion
Fusion
Fusion
Research
Research
Research
Research
Play-Fi
Play-Fi
Play-Fi
Play-Fi
(ControlWorks) v1.0.umc ..........Crestron User Module
Engine (ControlWorks) v1.0.1.uspSIMPL+ file used within the control module
Engine (ControlWorks) v1.0.1.ushSIMPL+ header file
Demo (ControlWorks) v1.0.smw Demo program for AV3 processor
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Revision History
V1.0 [email protected] 2/25/2015
-initial release
Development Environment
This module version was developed on the following hardware and software. Different versions
of hardware or software may or may not operate properly. If you have questions, please contact
us.
Manufacturer Hardware
Fusion Play-Fi
Software Version
15.12.11.0
Crestron Hardware
Crestron AV3 Processor
Firmware Version
1.011.0023
Software
Crestron SIMPL Windows
Software Version
4.03.20
Device Database
Crestron Database
71.05.004.00
54.00.012.00
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
ControlWorks Consulting, LLC Module License Agreement
Definitions:
ControlWorks, We, and Us refer to ControlWorks Consulting, LLC, with headquarters located at 701 Beta Drive,
Suite 22 Mayfield Village, Ohio 44143-2330. You and Dealer refer to the entity purchasing the module. Client
and End User refer to the person or entity for whom the Crestron hardware is being installed and/or will utilize
the installed system. System refers to all components described herein as well as other components, services,
or utilities required to achieve the functionality described herein. Module refers to files required to implement
the functionality provided by the module and may include source files with extensions such as UMC, USP, SMW
and VTP. Demo Program refers to a group of files used to demonstrate the capabilities of the Module, for
example a SIMPL Windows program and VisionTools Touchpanel file(s) illustrating the use of the Module but not
including the Module. Software refers to the Module and the Demo Program.
Disclaimer of Warranties
ControlWorks Consulting, LLC software is licensed to You as is. You, the consumer, bear the entire risk relating
to the quality and performance of the Software. In no event will ControlWorks Consulting, LLC be liable for
direct, indirect, incidental or consequential damages resulting from any defect in the Software, even if
ControlWorks Consulting, LLC had reason to know of the possibility of such damage. If the Software proves to
have defects, You and not Us must assume the cost of any necessary service or repair resulting from such
defects.
Provision of Support
We provide limited levels of technical support only for the most recent version of the Module as determined by
Us. We do not provide support for previous version of the module, modifications to the module not made by Us,
to persons who have not purchased the module from Us. In addition, we may decline to provide support if the
Demo Program has not been utilized. We may withdraw a module from sale and discontinue providing support
at any time and for any reason, including, for example, if the equipment for which the Module is written is
discontinued or substantially modified. The remainder of your rights and obligations pursuant to this license will
not be affected should ControlWorks discontinue support for a module.
Modification of Software
You may not decrypt (if encrypted), reverse engineer, modify, translate, disassemble, or de-compile the Module
in whole or part. You may modify the Demo Program. In no event will ControlWorks Consulting, LLC be liable for
direct, indirect, incidental or consequential damages resulting from You modifying the Software in any manner.
Indemnification/Hold Harmless
ControlWorks, in its sole and absolute discretion may refuse to provide support for the application of the Module
in such a manner that We feel has the potential for property damage, or physical injury to any person. Dealer
shall indemnify and hold harmless ControlWorks Consulting LLC, its employees, agents, and owners from any
and all liability, including direct, indirect, and consequential damages, including but not limited to personal
injury, property damage, or lost profits which may result from the operation of a program containing a
ControlWorks Consulting, LLC Module or any component thereof.
License Grant
Software authored by ControlWorks remains the property of ControlWorks. ControlWorks grants You the nonexclusive, non-transferable, perpetual license to use the Software authored by ControlWorks as a component of
Systems programmed by You. This Software is the intellectual property of ControlWorks Consulting, LLC and is
protected by law, including United States and International copyright laws.
This Software and the
accompanying license may not be transferred, resold, or assigned to other persons, organizations or other
Crestron Dealers via any means.
The use of this software indicates acceptance of the terms of this agreement.
Copyright (C) 2016 ControlWorks Consulting, LLC All Rights Reserved – Use Subject to License.
US Government Restricted Rights. Use, duplication or disclosure by the Government is subject to restrictions set
forth in subparagraphs (a)-(d) of FAR 52.227-19.
Fusion Research Play-Fi (ControlWorks) v1.0
Telephone: (+1)440-449-1100
[email protected]
http://www.controlworks.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement