IPS 4 Page Short Form Colour Brochure

IPS 4 Page Short Form Colour Brochure
IPS Mould Drop Chutes, Skirts, Mould Curtains and Material Bin Covers
Keeping your moulded parts where you want them
IPS Mould Drop Chutes, Skirts, Mould Curtains and Material Bin Covers
Mould Chutes
WHY BUY?
4
4
4
4
4
4
Reduces Scrap
Easy Installation
Eliminates Contamination
Quick Access to the Mould
Reduces Marks on Mouldings
Easily moveable to other
machines
in-line with the machine,
normally onto a waiting
conveyor.
IPS Mould Chutes stop
your parts from scattering
randomly in the “drop zone”.
Mould Chutes ensure your parts
land on your conveyor or in your
packing case and not on the floor.
The unique design of the soft
drop mould chute lets it
attach under the mould. As
the mould opens your delicate
parts fall gently into the Soft
Drop chute and are slowly
transferred on to the conveyor.
Mould Curtains
Mould Curtains have a
rapid pay back based on
scrap reduction and
increased good
production output. Since
Mould Curtains are easily
attached and removed as
necessary, they can be
quickly moved from press
to press to meet changing
production demands or
simply removed in seconds
for equipment
maintenance purposes.
Mould Chutes are made of durable
plastic with a PVC lining in the
bottom to protect even the most
delicate moulding. The unique
construction will not absorb oil or
grease and is abrasion, puncture, and
tear resistant.
Each Mould Chute is easily cleaned
using simple household cleaners and
there are no concertina folds to
trap mouldings or dirt.
Mould Chutes are available as
Right-Angle exit, In-Line exit and
Soft Drop for delicate
components, there are 18
standard sizes or we can
manufacture to your own dimensions
with in-line or side exit.
Right angle mould chutes are
designed to move with the tool and
allow you to connect the mounting
magnets high up into the moulding
area.
In-line chutes attach directly to the
chassis of the machine ejecting parts
®
CRYSTAL
CLEAR
CONSTRUCTION
WHY BUY?
All chutes and skirts can be
used in combination with
mould curtains keeping
your mouldings in the right
place every time
4
4
4
4
4
4
Reduces Scrap
Eliminates Contamination
Increases Profits
Easy Installation
Quick Access to the Mould
Easily moveable to other
machines
IPS Mould Drop Chutes, Skirts, Mould Curtains and Material Bin Covers
Mould
Skirts
Straight and tapered mould
skirts have concertina folds
and can both be mounted
directly onto the moving
tool, ensuring your parts go
where you want them! and
not on the floor.
MAGNETIC
FIXINGS
IPS Mould Curtains prevent your parts
from scattering randomly within the
mould open space by keeping them
within the desired “drop zone”. Mould
Curtains are a crystal clear plastic
curtain which attaches to either side of
the mould using magnets. As the
mould opens and closes, the Mould
Curtains expand and contract to
provide a curtain that prevents
moulded parts from falling outside the
drop zone.
The crystal clear plastic allows you to
observe your moulding area and
monitor your parts production in
progress. With an in-service life
expectancy of 3 million cycles.
In applications where you
have multi-cavity moulds,
many skirts can be
designed to keep parts
separated further reducing
damage.
All Chutes and Skirts can be
attached to the machine
using either magnets or
custom support
harnesses. Velcro straps
allow precise adjustment
of the chute to prevent
loss of parts from
uncontrolled ejections.
WHY BUY?
4
4
4
4
4
4
Reduces Scrap
Easy Installation
Eliminates Contamination
Quick Access to the Mould
Reduces Marks on Mouldings
Easily moveable to other
machines
For more information and full
technical specification visit:
www.invotecsolutions.co.uk/ips
®
IPS Mould Drop Chutes, Skirts, Mould Curtains and Material Bin Covers
Drum, Gaylord & Octabin
Material Bin
Covers
One size fits all
standard drums
All types can be ordered in custom
sizes to suit most applications.
IPS Material Bin Covers prevent your
raw material from becoming
contaminated from air born dirt, dust
and other unwanted debris by keeping
them secure within the container.
Typically all covers come with 2 x
70mm/2.75" probe openings with a
clear inspection window.
Standard Drum covers fit drums
480mm/19" to 600mm/24", there are 6
standard size Gaylord covers and many
versions of Octabin covers available.
For more information and full
technical specification visit:
www.invotecsolutions.co.uk/ips
WHY BUY?
4
4
4
4
Unique Design
Easy Installation
Increases Profits
Eliminates Material
Contamination
4 Choice of standard sizes or
made to your own size
4 Special openings for re-grind
and other custom applications
Tie bar covers
Why tie bar covers? Tie bar covers are
used to protect mouldings from tie bar
grease contamination and to help
prevent damage during mould
changes. With modern moulding
techniques even an in-mould label
getting between the tie bar and seals
can quickly cause expensive downtime.
Our covers are made of tough oil
resistant polyester material with plastic
zippers. They are attached to each
platen using magnetic restraints.
Tie bar covers are offered in a large
range of sizes and come with a
complete set of mounting hardware.
For more information contact your local distributor
Affix distributor stamp here.
Discover us at:
www.invotecsolutions.co.uk
®
In the event there are no distributor details above, please contact:
Sales and Distribution Invotec Solutions Limited, Unit 8 Park Farm, Tyringham (UK), MK16 9ES
Telephone: 0845 838 1510 • Fax: 0845 838 1520 • Email: [email protected]
Accounts and Administration Invotec Solutions Limited, The Old School, 3 Forest Road, Hartwell (UK), NN7 2HE
stamixco
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement